Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
simtrace2
/
a708ea1d992ecdf84c6747ecef803b2573064e48
/
firmware
/
libboard
/
common
6b7f8d1
make sim switch board specific
by Kévin Redon
· 5 years ago
19cd3b0
firmware: do not allow undefined symbols
by Eric Wild
· 4 years, 6 months ago
b6e2f0f
DFU: add DFU application
by Kévin Redon
· 4 years, 10 months ago
198c3fb
improve shared bootloader/application memory
by Kévin Redon
· 4 years, 10 months ago
9acff5e
make LED definitions board specific
by Kévin Redon
· 5 years ago
e5efbb1
hw: put board specific pin definition in corresponding file
by Kévin Redon
· 5 years ago
acb7bd9
disable ERASE pin
by Kévin Redon
· 5 years ago
ad0958e
minor: update copyright
by Kévin Redon
· 6 years ago
80d9476
UART: switch baud rate to 921600 bps
by Kévin Redon
· 6 years ago
e2b0f97
set main clock for using UART at 921600 bps
by Kévin Redon
· 6 years ago
c394109
firmware: Enable -Wformat and resolve all related compiler warnings
by Harald Welte
· 6 years ago
ff3d849
USB: increase USB reset time
by Kévin Redon
· 6 years ago
1836ac0
add synchronous UART transmission and use it in exceptions
by Kévin Redon
· 6 years ago
ac0843a
make adc2uv common
by Kévin Redon
· 6 years ago
d975411
LED: add need pattern
by Kévin Redon
· 6 years ago
33d1eb7
replace leading spaces with tabs
by Kévin Redon
· 6 years ago
93717e4
set linux end of line
by Kévin Redon
· 6 years ago
9a12d68
firmware: set license to GPLv2+
by Kévin Redon
· 6 years ago
9918c28
DFU: use central DFU override check
by Kévin Redon
· 6 years ago
2bdaa73
UART: remove unused code
by Kévin Redon
· 6 years ago
fcf2743
UART: make IRQ/ISR enabling simpler
by Kévin Redon
· 6 years ago
d44cb80
DFU: disable configured console UART before starting main app
by Kévin Redon
· 6 years ago
9e29a3e
DFU: set stack pointer before starting main app
by Kévin Redon
· 6 years ago
4cbdc7c
fix LED switching on/off
by King Kévin
· 6 years ago
30f90a7
console: drop data to be send when buffer is already full
by Kévin Redon
· 6 years ago
a1012b1
USB: add central file to define USB IDs, classes, and endpoints
by Kévin Redon
· 6 years ago
11914d9
LED: add short LED pulse blinking pattern
by Kévin Redon
· 6 years ago
ca9e4bf
board: fix LED pin definition
by Kévin Redon
· 6 years ago
4091d78
board: comment USART definitions and add corresponding IRQ numbers
by Kévin Redon
· 6 years ago
eac1bec
console: use buffer and interrupts instead of busy loops for UART debug output
by Kévin Redon
· 6 years ago
80303c1
DFU: only boot the application if it has a valid start
by Kévin Redon
· 6 years ago
f5869d4
USB: implement USB reset by setting the on-board pull-up on D+ low
by Kévin Redon
· 6 years ago
76be7c8
fix pointer casting warning
by Kévin Redon
· 6 years ago
432ba51
add copyright notice
by Kévin Redon
· 6 years ago
27f5fc6
DFU: Move "Override DFU" (force DFU) code to board-specific section
by Harald Welte
· 7 years ago
eb50c9f
[firmware] sim_switch + wwan_perst: Don't re-initialize
by Harald Welte
· 7 years ago
c47fc5f
set local slot LED according to remote/local state.
by Harald Welte
· 7 years ago
02d0ec6
uart_console: Re-start watchdog during busy-waiting for serial chars
by Harald Welte
· 7 years ago
0709d2d
perst/sim_switch: Log events using TRACE_INFO
by Harald Welte
· 7 years ago
44622df
consistently use 0-based counting of modems/slots
by Harald Welte
· 7 years ago
5c583d3
Generalize SIM switching code and allow local/remote switching via USB
by Harald Welte
· 7 years ago
2cbc9b2
use same USB Product ID for DFU and runtime mode
by Harald Welte
· 7 years ago
abba8a8
LED: Introduce LED blinking pattern code
by Harald Welte
· 8 years ago
c6e482d
qmod eeprom/i2c: Re-start watchdog while slow bit-banging
by Harald Welte
· 8 years ago
1405100
DFU: Introduce board/app-specific override for booting in DFU mode
by Harald Welte
· 8 years ago
aaba4af
Use Supply Controller to avoid running SAM3 on voltages lower than 3.0V
by Harald Welte
· 8 years ago
3ecbf67
only simtrace is bus-powered, SAM3 on qmod + owhw are self-powered
by Harald Welte
· 8 years ago
91fc402
DFU: make sure to properly initialize g_dfu pointer before using it
by Harald Welte
· 8 years ago
d1e9634
DFU: fix transitions between runtime and DFU mode
by Harald Welte
· 8 years ago
db17e83
cstartup: (re-)enable interrupts before calling main()
by Harald Welte
· 8 years ago
0af4948
cstartup / USBD: Use correct Makefile conditionals for DFU
by Harald Welte
· 8 years ago
cab6641
flashd: Set 6 Wait states as per Errata requiremens for Revision A
by Harald Welte
· 8 years ago
0395bd1
move PLLB (for USB) initialization to board_lowlevel.c
by Harald Welte
· 8 years ago
adba0ce
fix g_dfu access from both DFU and runtime access
by Harald Welte
· 8 years ago
65cca7c
ensure g_dfu is linked to start of RAM when building DFU loader
by Harald Welte
· 8 years ago
32852bc
DFU: towards a more complete implementation
by Harald Welte
· 8 years ago
d09829d
Remove newlib dependency, include own stdio/string/assert
by Harald Welte
· 8 years ago
d8a003d
Structure build system to build for multiple boards/apps/environments
by Harald Welte
· 8 years ago
3f5e3dd
Change directory structure to align with Atmel softpack
by Harald Welte
· 8 years ago