Gitiles
Code Review Sign In
gerrit.osmocom.org / simtrace2 / 9918c2840e4c0ff18a9441b1e0371d244e891ac1
commit9918c2840e4c0ff18a9441b1e0371d244e891ac1[log] [tgz]
authorKévin Redon <kredon@sysmocom.de>Sat Jul 07 15:22:16 2018 +0200
committerKévin Redon <kredon@sysmocom.de>Wed Jul 11 20:48:24 2018 +0200
tree938a6aa8a4cf7ac538085254ee5c40f4475e01d3
parentd24e9bde26230f5364fbea8fc8a5052a693b7790 [diff]
DFU: use central DFU override check

TRACE_INFO will also provide the DFU start reason, but TRACE_INFO
(TRACE_LEVEL >= 4) should only be used for debugging.
WARNING: With TRACE_LEVEL >= 4 the DFU binary is over the maximum of
16 kiB allocated for the DFU bootloader.
Thus make combined will not boot the main application because its
start if after the expecte 16 kiB address; and flashing using DFU
will overwrite the DFU bootloader itself.

Change-Id: I82323e0f76c03f67df7dc8f2b6783166cc25f3aa
2 files changed
tree: 938a6aa8a4cf7ac538085254ee5c40f4475e01d3
  1. contrib/
  2. firmware/
  3. hardware/
  4. host/
  5. .gitignore
  6. .gitmodules
  7. clk_calc.py
  8. git-version-gen
  9. README.md
README.md

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

This is under heavy development, and right now it is not surprising if things still break on a daily basis.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.

The goal is to support the following devices:

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware