commit | 1836ac076167f6975b5e46a48de9d00e929e4fef | [log] [tgz] |
---|---|---|
author | Kévin Redon <kredon@sysmocom.de> | Thu Aug 02 15:02:05 2018 +0200 |
committer | Kévin Redon <kredon@sysmocom.de> | Sat Aug 04 11:16:13 2018 +0200 |
tree | ffc5becf8828bd6173c2ce141eceff0a0ce08f98 | |
parent | dd36d9b0100053c7d42fe950d5033ad01ba8d196 [diff] |
add synchronous UART transmission and use it in exceptions The default ISR (particularly the HardFault handler) print information, but this information was not displayed on the console because the UART IRQ is lower than some default blocking IRQ. Allowing to set synchronous transfer corrects this. The underlying Atmel exception library had to be modified to use the synchronous output. Making UART_PutChar always synchronous when called from an ISR is not desired because we use TRACE_ macros is some ISR. The synchronous output must be set explicitly. Change-Id: I1b4ace5185cf2dc32684934ed12bf6a8682e9bad
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
This is under heavy development, and right now it is not surprising if things still break on a daily basis.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.
The goal is to support the following devices:
This repository contains several directory