commit | d44cb80bc59681259f14d4d9c768edf40f892304 | [log] [tgz] |
---|---|---|
author | Kévin Redon <kredon@sysmocom.de> | Sat Jul 07 14:41:11 2018 +0200 |
committer | Kévin Redon <kredon@sysmocom.de> | Sat Jul 07 14:43:50 2018 +0200 |
tree | 709603a55547f9ad6a026c3a727b12edcae99cf3 | |
parent | 9e29a3eb37acde5ec5a63b29bdab26055a60bd80 [diff] |
DFU: disable configured console UART before starting main app The DFU uses the UART peripheral (with IRQ/ISR) for the debug output console. Before starting the main application we should make sure this configuration is reset to avoid interference (particularly the IRQ/ISR). This is not too important though since the main application reconfigures the UART for console output. Other peripheral could also be disabled (e.g. all other PIO used by DFU), but most of them also get configured by the main application. Change-Id: I8234d1b85938ad6393094c08183f613ad09ee01b
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
This is under heavy development, and right now it is not surprising if things still break on a daily basis.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.
The goal is to support the following devices:
This repository contains several directory