| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 1 | ! |
| 2 | ! OsmoBSC (1.0.1.122-630df) configuration saved from vty |
| 3 | !! |
| 4 | password foo |
| 5 | ! |
| 6 | log stderr |
| Harald Welte | 6b3e4ab | 2018-09-25 20:41:28 +0200 | [diff] [blame] | 7 | logging filter all 1 |
| 8 | logging color 1 |
| 9 | logging print category 0 |
| 10 | logging timestamp 0 |
| 11 | logging level rll notice |
| 12 | logging level cc notice |
| 13 | logging level mm notice |
| 14 | logging level rr notice |
| 15 | logging level rsl notice |
| 16 | logging level nm info |
| 17 | logging level pag notice |
| 18 | logging level meas notice |
| 19 | logging level msc notice |
| 20 | logging level mgcp notice |
| 21 | logging level ho notice |
| 22 | logging level ref notice |
| 23 | logging level nat notice |
| 24 | logging level ctrl notice |
| 25 | logging level filter debug |
| 26 | logging level pcu debug |
| 27 | logging level lglobal notice |
| 28 | logging level llapd notice |
| 29 | logging level linp notice |
| 30 | logging level lmux notice |
| 31 | logging level lmi notice |
| 32 | logging level lmib notice |
| 33 | logging level lsms notice |
| 34 | logging level lctrl notice |
| 35 | logging level lgtp notice |
| 36 | logging level lstats notice |
| 37 | logging level lgsup notice |
| 38 | logging level loap notice |
| 39 | logging level lss7 notice |
| 40 | logging level lsccp notice |
| 41 | logging level lsua notice |
| 42 | logging level lm3ua notice |
| 43 | logging level lmgcp notice |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 44 | ! |
| 45 | stats interval 5 |
| 46 | ! |
| 47 | line vty |
| 48 | no login |
| 49 | ! |
| 50 | e1_input |
| 51 | e1_line 0 driver ipa |
| 52 | e1_line 0 port 0 |
| 53 | no e1_line 0 keepalive |
| 54 | network |
| 55 | network country code 1 |
| 56 | mobile network code 1 |
| Stefan Sperling | 2ace5a2 | 2018-05-29 17:07:50 +0200 | [diff] [blame] | 57 | encryption a5 0 1 3 |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 58 | neci 1 |
| 59 | paging any use tch 0 |
| Neels Hofmeyr | 9140101 | 2019-07-11 00:42:35 +0200 | [diff] [blame^] | 60 | handover 1 |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 61 | handover window rxlev averaging 10 |
| 62 | handover window rxqual averaging 1 |
| 63 | handover window rxlev neighbor averaging 10 |
| 64 | handover power budget interval 6 |
| 65 | handover power budget hysteresis 3 |
| 66 | handover maximum distance 9999 |
| 67 | dyn_ts_allow_tch_f 1 |
| 68 | periodic location update 30 |
| Harald Welte | 1ff6999 | 2017-12-14 12:31:17 +0100 | [diff] [blame] | 69 | timer t3113 10 |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 70 | bts 0 |
| 71 | type sysmobts |
| 72 | band DCS1800 |
| 73 | cell_identity 0 |
| 74 | location_area_code 1 |
| 75 | dtx uplink force |
| 76 | dtx downlink |
| Neels Hofmeyr | 9f23091 | 2018-04-11 01:23:27 +0200 | [diff] [blame] | 77 | base_station_id_code 10 |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 78 | ms max power 15 |
| 79 | cell reselection hysteresis 4 |
| 80 | rxlev access min 0 |
| 81 | radio-link-timeout 32 |
| 82 | channel allocator ascending |
| 83 | rach tx integer 9 |
| 84 | rach max transmission 7 |
| 85 | channel-descrption attach 1 |
| 86 | channel-descrption bs-pa-mfrms 5 |
| 87 | channel-descrption bs-ag-blks-res 1 |
| 88 | early-classmark-sending forbidden |
| 89 | ip.access unit_id 1234 0 |
| 90 | oml ip.access stream_id 255 line 0 |
| Neels Hofmeyr | bd0ef93 | 2018-03-19 14:58:46 +0100 | [diff] [blame] | 91 | # remote-BSS neighbor: |
| Neels Hofmeyr | 8e1f3c5 | 2018-09-27 22:00:15 +0200 | [diff] [blame] | 92 | neighbor lac 99 arfcn 123 bsic any |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 93 | neighbor-list mode manual-si5 |
| 94 | neighbor-list add arfcn 100 |
| 95 | neighbor-list add arfcn 200 |
| 96 | si5 neighbor-list add arfcn 10 |
| 97 | si5 neighbor-list add arfcn 20 |
| Stefan Sperling | 2ace5a2 | 2018-05-29 17:07:50 +0200 | [diff] [blame] | 98 | codec-support fr hr efr amr |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 99 | gprs mode gprs |
| 100 | gprs 11bit_rach_support_for_egprs 0 |
| 101 | gprs routing area 0 |
| 102 | gprs network-control-order nc0 |
| 103 | gprs cell bvci 1234 |
| 104 | gprs cell timer blocking-timer 3 |
| 105 | gprs cell timer blocking-retries 3 |
| 106 | gprs cell timer unblocking-retries 3 |
| 107 | gprs cell timer reset-timer 3 |
| 108 | gprs cell timer reset-retries 3 |
| 109 | gprs cell timer suspend-timer 10 |
| 110 | gprs cell timer suspend-retries 3 |
| 111 | gprs cell timer resume-timer 10 |
| 112 | gprs cell timer resume-retries 3 |
| 113 | gprs cell timer capability-update-timer 10 |
| 114 | gprs cell timer capability-update-retries 3 |
| 115 | gprs nsei 1234 |
| 116 | gprs ns timer tns-block 3 |
| 117 | gprs ns timer tns-block-retries 3 |
| 118 | gprs ns timer tns-reset 3 |
| 119 | gprs ns timer tns-reset-retries 3 |
| 120 | gprs ns timer tns-test 30 |
| 121 | gprs ns timer tns-alive 3 |
| 122 | gprs ns timer tns-alive-retries 10 |
| 123 | gprs nsvc 0 nsvci 1234 |
| 124 | gprs nsvc 0 local udp port 23000 |
| 125 | gprs nsvc 0 remote udp port 23000 |
| 126 | gprs nsvc 0 remote ip 192.168.100.239 |
| 127 | gprs nsvc 1 nsvci 0 |
| 128 | gprs nsvc 1 local udp port 0 |
| 129 | gprs nsvc 1 remote udp port 0 |
| 130 | gprs nsvc 1 remote ip 0.0.0.0 |
| 131 | no force-combined-si |
| 132 | trx 0 |
| 133 | rf_locked 0 |
| 134 | arfcn 871 |
| 135 | nominal power 23 |
| 136 | max_power_red 20 |
| 137 | rsl e1 tei 0 |
| 138 | timeslot 0 |
| 139 | phys_chan_config CCCH+SDCCH4 |
| 140 | hopping enabled 0 |
| 141 | timeslot 1 |
| 142 | phys_chan_config TCH/F |
| 143 | hopping enabled 0 |
| 144 | timeslot 2 |
| 145 | phys_chan_config TCH/F |
| 146 | hopping enabled 0 |
| 147 | timeslot 3 |
| 148 | phys_chan_config TCH/F |
| 149 | hopping enabled 0 |
| 150 | timeslot 4 |
| 151 | phys_chan_config TCH/F |
| 152 | hopping enabled 0 |
| 153 | timeslot 5 |
| Philipp Maier | cb6cc48 | 2018-03-26 13:08:00 +0200 | [diff] [blame] | 154 | phys_chan_config TCH/H |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 155 | hopping enabled 0 |
| 156 | timeslot 6 |
| 157 | phys_chan_config PDCH |
| 158 | hopping enabled 0 |
| 159 | timeslot 7 |
| 160 | phys_chan_config PDCH |
| 161 | hopping enabled 0 |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 162 | bts 1 |
| 163 | type sysmobts |
| 164 | band DCS1800 |
| 165 | cell_identity 1 |
| Stefan Sperling | 7159dbb | 2018-01-09 13:19:46 +0100 | [diff] [blame] | 166 | location_area_code 1 |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 167 | dtx uplink force |
| 168 | dtx downlink |
| Neels Hofmeyr | 9f23091 | 2018-04-11 01:23:27 +0200 | [diff] [blame] | 169 | base_station_id_code 11 |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 170 | ms max power 15 |
| 171 | cell reselection hysteresis 4 |
| 172 | rxlev access min 0 |
| 173 | radio-link-timeout 32 |
| 174 | channel allocator ascending |
| 175 | rach tx integer 9 |
| 176 | rach max transmission 7 |
| 177 | channel-descrption attach 1 |
| 178 | channel-descrption bs-pa-mfrms 5 |
| 179 | channel-descrption bs-ag-blks-res 1 |
| 180 | early-classmark-sending forbidden |
| 181 | ip.access unit_id 1235 0 |
| 182 | oml ip.access stream_id 255 line 0 |
| 183 | neighbor-list mode manual-si5 |
| 184 | neighbor-list add arfcn 100 |
| 185 | neighbor-list add arfcn 200 |
| 186 | si5 neighbor-list add arfcn 10 |
| 187 | si5 neighbor-list add arfcn 20 |
| Stefan Sperling | 2ace5a2 | 2018-05-29 17:07:50 +0200 | [diff] [blame] | 188 | codec-support fr hr efr amr |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 189 | gprs mode gprs |
| 190 | gprs 11bit_rach_support_for_egprs 0 |
| 191 | gprs routing area 0 |
| 192 | gprs network-control-order nc0 |
| 193 | gprs cell bvci 1235 |
| 194 | gprs cell timer blocking-timer 3 |
| 195 | gprs cell timer blocking-retries 3 |
| 196 | gprs cell timer unblocking-retries 3 |
| 197 | gprs cell timer reset-timer 3 |
| 198 | gprs cell timer reset-retries 3 |
| 199 | gprs cell timer suspend-timer 10 |
| 200 | gprs cell timer suspend-retries 3 |
| 201 | gprs cell timer resume-timer 10 |
| 202 | gprs cell timer resume-retries 3 |
| 203 | gprs cell timer capability-update-timer 10 |
| 204 | gprs cell timer capability-update-retries 3 |
| 205 | gprs nsei 1235 |
| 206 | gprs ns timer tns-block 3 |
| 207 | gprs ns timer tns-block-retries 3 |
| 208 | gprs ns timer tns-reset 3 |
| 209 | gprs ns timer tns-reset-retries 3 |
| 210 | gprs ns timer tns-test 30 |
| 211 | gprs ns timer tns-alive 3 |
| 212 | gprs ns timer tns-alive-retries 10 |
| 213 | gprs nsvc 0 nsvci 1235 |
| 214 | gprs nsvc 0 local udp port 23000 |
| 215 | gprs nsvc 0 remote udp port 23000 |
| 216 | gprs nsvc 0 remote ip 192.168.100.239 |
| 217 | gprs nsvc 1 nsvci 0 |
| 218 | gprs nsvc 1 local udp port 0 |
| 219 | gprs nsvc 1 remote udp port 0 |
| 220 | gprs nsvc 1 remote ip 0.0.0.0 |
| 221 | no force-combined-si |
| 222 | trx 0 |
| 223 | rf_locked 0 |
| 224 | arfcn 871 |
| 225 | nominal power 23 |
| 226 | max_power_red 20 |
| 227 | rsl e1 tei 0 |
| 228 | timeslot 0 |
| 229 | phys_chan_config CCCH+SDCCH4 |
| 230 | hopping enabled 0 |
| 231 | timeslot 1 |
| 232 | phys_chan_config TCH/F |
| 233 | hopping enabled 0 |
| 234 | timeslot 2 |
| 235 | phys_chan_config TCH/F |
| 236 | hopping enabled 0 |
| 237 | timeslot 3 |
| 238 | phys_chan_config TCH/F |
| 239 | hopping enabled 0 |
| 240 | timeslot 4 |
| 241 | phys_chan_config TCH/F |
| 242 | hopping enabled 0 |
| 243 | timeslot 5 |
| Philipp Maier | cb6cc48 | 2018-03-26 13:08:00 +0200 | [diff] [blame] | 244 | phys_chan_config TCH/H |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 245 | hopping enabled 0 |
| 246 | timeslot 6 |
| 247 | phys_chan_config PDCH |
| 248 | hopping enabled 0 |
| 249 | timeslot 7 |
| 250 | phys_chan_config PDCH |
| 251 | hopping enabled 0 |
| 252 | bts 2 |
| 253 | type sysmobts |
| 254 | band DCS1800 |
| 255 | cell_identity 1 |
| Stefan Sperling | 7159dbb | 2018-01-09 13:19:46 +0100 | [diff] [blame] | 256 | location_area_code 2 |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 257 | dtx uplink force |
| 258 | dtx downlink |
| Neels Hofmeyr | 9f23091 | 2018-04-11 01:23:27 +0200 | [diff] [blame] | 259 | base_station_id_code 12 |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 260 | ms max power 15 |
| 261 | cell reselection hysteresis 4 |
| 262 | rxlev access min 0 |
| 263 | radio-link-timeout 32 |
| 264 | channel allocator ascending |
| 265 | rach tx integer 9 |
| 266 | rach max transmission 7 |
| 267 | channel-descrption attach 1 |
| 268 | channel-descrption bs-pa-mfrms 5 |
| 269 | channel-descrption bs-ag-blks-res 1 |
| 270 | early-classmark-sending forbidden |
| 271 | ip.access unit_id 1236 0 |
| 272 | oml ip.access stream_id 255 line 0 |
| 273 | neighbor-list mode manual-si5 |
| 274 | neighbor-list add arfcn 100 |
| 275 | neighbor-list add arfcn 200 |
| 276 | si5 neighbor-list add arfcn 10 |
| 277 | si5 neighbor-list add arfcn 20 |
| Stefan Sperling | 2ace5a2 | 2018-05-29 17:07:50 +0200 | [diff] [blame] | 278 | codec-support fr hr efr amr |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 279 | gprs mode gprs |
| 280 | gprs 11bit_rach_support_for_egprs 0 |
| 281 | gprs routing area 0 |
| 282 | gprs network-control-order nc0 |
| 283 | gprs cell bvci 1236 |
| 284 | gprs cell timer blocking-timer 3 |
| 285 | gprs cell timer blocking-retries 3 |
| 286 | gprs cell timer unblocking-retries 3 |
| 287 | gprs cell timer reset-timer 3 |
| 288 | gprs cell timer reset-retries 3 |
| 289 | gprs cell timer suspend-timer 10 |
| 290 | gprs cell timer suspend-retries 3 |
| 291 | gprs cell timer resume-timer 10 |
| 292 | gprs cell timer resume-retries 3 |
| 293 | gprs cell timer capability-update-timer 10 |
| 294 | gprs cell timer capability-update-retries 3 |
| 295 | gprs nsei 1236 |
| 296 | gprs ns timer tns-block 3 |
| 297 | gprs ns timer tns-block-retries 3 |
| 298 | gprs ns timer tns-reset 3 |
| 299 | gprs ns timer tns-reset-retries 3 |
| 300 | gprs ns timer tns-test 30 |
| 301 | gprs ns timer tns-alive 3 |
| 302 | gprs ns timer tns-alive-retries 10 |
| 303 | gprs nsvc 0 nsvci 1236 |
| 304 | gprs nsvc 0 local udp port 23000 |
| 305 | gprs nsvc 0 remote udp port 23000 |
| 306 | gprs nsvc 0 remote ip 192.168.100.239 |
| 307 | gprs nsvc 1 nsvci 0 |
| 308 | gprs nsvc 1 local udp port 0 |
| 309 | gprs nsvc 1 remote udp port 0 |
| 310 | gprs nsvc 1 remote ip 0.0.0.0 |
| 311 | no force-combined-si |
| 312 | trx 0 |
| 313 | rf_locked 0 |
| 314 | arfcn 871 |
| 315 | nominal power 23 |
| 316 | max_power_red 20 |
| 317 | rsl e1 tei 0 |
| 318 | timeslot 0 |
| 319 | phys_chan_config CCCH+SDCCH4 |
| 320 | hopping enabled 0 |
| 321 | timeslot 1 |
| 322 | phys_chan_config TCH/F |
| 323 | hopping enabled 0 |
| 324 | timeslot 2 |
| 325 | phys_chan_config TCH/F |
| 326 | hopping enabled 0 |
| 327 | timeslot 3 |
| 328 | phys_chan_config TCH/F |
| 329 | hopping enabled 0 |
| 330 | timeslot 4 |
| 331 | phys_chan_config TCH/F |
| 332 | hopping enabled 0 |
| 333 | timeslot 5 |
| Philipp Maier | cb6cc48 | 2018-03-26 13:08:00 +0200 | [diff] [blame] | 334 | phys_chan_config TCH/H |
| Harald Welte | 5d1a220 | 2017-12-13 19:51:29 +0100 | [diff] [blame] | 335 | hopping enabled 0 |
| 336 | timeslot 6 |
| 337 | phys_chan_config PDCH |
| 338 | hopping enabled 0 |
| 339 | timeslot 7 |
| 340 | phys_chan_config PDCH |
| 341 | hopping enabled 0 |
| Neels Hofmeyr | 9140101 | 2019-07-11 00:42:35 +0200 | [diff] [blame^] | 342 | bts 3 |
| 343 | type sysmobts |
| 344 | band DCS1800 |
| 345 | cell_identity 3 |
| 346 | location_area_code 3 |
| 347 | # re-use bts 2's ARFCN 871 and BSIC 12 (to test handover config) |
| 348 | base_station_id_code 12 |
| 349 | trx 0 |
| 350 | rf_locked 0 |
| 351 | arfcn 871 |
| 352 | nominal power 23 |
| 353 | max_power_red 20 |
| 354 | rsl e1 tei 0 |
| 355 | timeslot 0 |
| 356 | phys_chan_config CCCH+SDCCH4 |
| 357 | timeslot 1 |
| 358 | phys_chan_config TCH/F |
| 359 | timeslot 2 |
| 360 | phys_chan_config TCH/F |
| 361 | timeslot 3 |
| 362 | phys_chan_config TCH/F |
| 363 | timeslot 4 |
| 364 | phys_chan_config TCH/F |
| 365 | timeslot 5 |
| 366 | phys_chan_config TCH/H |
| 367 | timeslot 6 |
| 368 | phys_chan_config PDCH |
| 369 | timeslot 7 |
| 370 | phys_chan_config PDCH |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 371 | msc 0 |
| Stefan Sperling | 2ace5a2 | 2018-05-29 17:07:50 +0200 | [diff] [blame] | 372 | ip.access rtp-base 4000 |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 373 | no bsc-welcome-text |
| 374 | no bsc-msc-lost-text |
| 375 | no bsc-grace-text |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 376 | type normal |
| 377 | allow-emergency allow |
| 378 | amr-config 12_2k forbidden |
| 379 | amr-config 10_2k forbidden |
| 380 | amr-config 7_95k forbidden |
| 381 | amr-config 7_40k forbidden |
| 382 | amr-config 6_70k forbidden |
| 383 | amr-config 5_90k allowed |
| 384 | amr-config 5_15k forbidden |
| 385 | amr-config 4_75k forbidden |
| Stefan Sperling | 2ace5a2 | 2018-05-29 17:07:50 +0200 | [diff] [blame] | 386 | codec-list fr1 fr2 fr3 hr1 hr3 |
| Harald Welte | 5d50a28 | 2018-06-03 12:32:39 +0200 | [diff] [blame] | 387 | lcls-mode mgw-loop |
| Harald Welte | ad33390 | 2017-12-11 19:52:42 +0100 | [diff] [blame] | 388 | bsc |
| 389 | mid-call-timeout 0 |
| 390 | no missing-msc-text |
| 391 | access-list-name bsc-list |