bsc: Run three virtual BTSs (2 in one lac, 1 in another)
This allows us to verify if the BSC pages *only* where it is supposed
to page based on the cell identity list in the 08.08 PAGING.
Change-Id: I53ffe44279a7b83e045b3fdb25da64529955d457
diff --git a/bsc/osmo-bsc.cfg b/bsc/osmo-bsc.cfg
index 488ba09..ac1553e 100644
--- a/bsc/osmo-bsc.cfg
+++ b/bsc/osmo-bsc.cfg
@@ -176,6 +176,186 @@
timeslot 7
phys_chan_config PDCH
hopping enabled 0
+ bts 1
+ type sysmobts
+ band DCS1800
+ cell_identity 1
+ location_area_code 2
+ dtx uplink force
+ dtx downlink
+ base_station_id_code 63
+ ms max power 15
+ cell reselection hysteresis 4
+ rxlev access min 0
+ radio-link-timeout 32
+ channel allocator ascending
+ rach tx integer 9
+ rach max transmission 7
+ channel-descrption attach 1
+ channel-descrption bs-pa-mfrms 5
+ channel-descrption bs-ag-blks-res 1
+ early-classmark-sending forbidden
+ ip.access unit_id 1235 0
+ oml ip.access stream_id 255 line 0
+ neighbor-list mode manual-si5
+ neighbor-list add arfcn 100
+ neighbor-list add arfcn 200
+ si5 neighbor-list add arfcn 10
+ si5 neighbor-list add arfcn 20
+ codec-support fr
+ gprs mode gprs
+ gprs 11bit_rach_support_for_egprs 0
+ gprs routing area 0
+ gprs network-control-order nc0
+ gprs cell bvci 1235
+ gprs cell timer blocking-timer 3
+ gprs cell timer blocking-retries 3
+ gprs cell timer unblocking-retries 3
+ gprs cell timer reset-timer 3
+ gprs cell timer reset-retries 3
+ gprs cell timer suspend-timer 10
+ gprs cell timer suspend-retries 3
+ gprs cell timer resume-timer 10
+ gprs cell timer resume-retries 3
+ gprs cell timer capability-update-timer 10
+ gprs cell timer capability-update-retries 3
+ gprs nsei 1235
+ gprs ns timer tns-block 3
+ gprs ns timer tns-block-retries 3
+ gprs ns timer tns-reset 3
+ gprs ns timer tns-reset-retries 3
+ gprs ns timer tns-test 30
+ gprs ns timer tns-alive 3
+ gprs ns timer tns-alive-retries 10
+ gprs nsvc 0 nsvci 1235
+ gprs nsvc 0 local udp port 23000
+ gprs nsvc 0 remote udp port 23000
+ gprs nsvc 0 remote ip 192.168.100.239
+ gprs nsvc 1 nsvci 0
+ gprs nsvc 1 local udp port 0
+ gprs nsvc 1 remote udp port 0
+ gprs nsvc 1 remote ip 0.0.0.0
+ no force-combined-si
+ trx 0
+ rf_locked 0
+ arfcn 871
+ nominal power 23
+ max_power_red 20
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4
+ hopping enabled 0
+ timeslot 1
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 2
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 3
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 4
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 5
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 6
+ phys_chan_config PDCH
+ hopping enabled 0
+ timeslot 7
+ phys_chan_config PDCH
+ hopping enabled 0
+ bts 2
+ type sysmobts
+ band DCS1800
+ cell_identity 1
+ location_area_code 1
+ dtx uplink force
+ dtx downlink
+ base_station_id_code 63
+ ms max power 15
+ cell reselection hysteresis 4
+ rxlev access min 0
+ radio-link-timeout 32
+ channel allocator ascending
+ rach tx integer 9
+ rach max transmission 7
+ channel-descrption attach 1
+ channel-descrption bs-pa-mfrms 5
+ channel-descrption bs-ag-blks-res 1
+ early-classmark-sending forbidden
+ ip.access unit_id 1236 0
+ oml ip.access stream_id 255 line 0
+ neighbor-list mode manual-si5
+ neighbor-list add arfcn 100
+ neighbor-list add arfcn 200
+ si5 neighbor-list add arfcn 10
+ si5 neighbor-list add arfcn 20
+ codec-support fr
+ gprs mode gprs
+ gprs 11bit_rach_support_for_egprs 0
+ gprs routing area 0
+ gprs network-control-order nc0
+ gprs cell bvci 1236
+ gprs cell timer blocking-timer 3
+ gprs cell timer blocking-retries 3
+ gprs cell timer unblocking-retries 3
+ gprs cell timer reset-timer 3
+ gprs cell timer reset-retries 3
+ gprs cell timer suspend-timer 10
+ gprs cell timer suspend-retries 3
+ gprs cell timer resume-timer 10
+ gprs cell timer resume-retries 3
+ gprs cell timer capability-update-timer 10
+ gprs cell timer capability-update-retries 3
+ gprs nsei 1236
+ gprs ns timer tns-block 3
+ gprs ns timer tns-block-retries 3
+ gprs ns timer tns-reset 3
+ gprs ns timer tns-reset-retries 3
+ gprs ns timer tns-test 30
+ gprs ns timer tns-alive 3
+ gprs ns timer tns-alive-retries 10
+ gprs nsvc 0 nsvci 1236
+ gprs nsvc 0 local udp port 23000
+ gprs nsvc 0 remote udp port 23000
+ gprs nsvc 0 remote ip 192.168.100.239
+ gprs nsvc 1 nsvci 0
+ gprs nsvc 1 local udp port 0
+ gprs nsvc 1 remote udp port 0
+ gprs nsvc 1 remote ip 0.0.0.0
+ no force-combined-si
+ trx 0
+ rf_locked 0
+ arfcn 871
+ nominal power 23
+ max_power_red 20
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4
+ hopping enabled 0
+ timeslot 1
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 2
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 3
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 4
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 5
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 6
+ phys_chan_config PDCH
+ hopping enabled 0
+ timeslot 7
+ phys_chan_config PDCH
+ hopping enabled 0
msc 0
ip.access rtp-base 4000
timeout-ping 20