- dc8db92 BTS_Tests.ttcn: fix name of f_trx_fake_toffs256() by Vadim Yanitskiy · 5 years ago
- 10d7246 BTS_Tests.ttcn: indicate default RSSI=-60 to FakeTRX by Vadim Yanitskiy · 5 years ago
- f4e997c BTS_Tests.ttcn: fix TRXC port mapping between test_CT and ConnHdlr by Vadim Yanitskiy · 5 years ago
- fc1a3ca BTS_Tests.ttcn: correct error messages about TRXC connection by Vadim Yanitskiy · 5 years ago
- 7d9f6db bts: Implement testcase for RR response frame loss by Harald Welte · 5 years ago
- 76771f1 bts: Factor out mobile-originated LAPDm establishment by Harald Welte · 5 years ago
- b2a3034 bts: Add test for expiring T200 N200+1 times by Harald Welte · 5 years ago
- ef6fd44 bts: Also test SACCH in TC_segm_concat by Harald Welte · 5 years ago
- 9ea918c bts: Add TC_segm_concat to test segmentation+concatenation by Harald Welte · 5 years ago
- 2f2b2b7 bts: Extend LAPDm test suite with a number of new tests by Harald Welte · 5 years ago
- 1047406 bts: don't require users to pass test case name to f_init() by Harald Welte · 5 years ago
- 61332c0 bts: BTS_Tests_LAPDm.ttcn: rename f_init() to f_lapdm_init() by Harald Welte · 5 years ago
- 72c81e7 bts: Remove one indent lvel from BTS_Tests_LAPDm.ttcn by Harald Welte · 5 years ago
- c38611b bts: Derive test component that talks RSL and LAPDm by Harald Welte · 5 years ago
- 97cca2f move lapdm/L1CTL_Test.ttcn to bts/BTS_Tests_LAPDm.ttcn by Harald Welte · 5 years ago
- 7c2c10c BTS_Tests.ttcn: introduce TC_ho_rach() for handover RACH by Vadim Yanitskiy · 5 years ago
- ab448a5 library/RSL_Types.ttcn: t(r|)s_RSL_CHAN_RQD: make chan_nr configurable by Vadim Yanitskiy · 5 years ago
- 0a8d6da L1CTL_Types.ttcn: accept SacchL1Header in ts_L1CTL_DATA_REQ_SACCH by Vadim Yanitskiy · 5 years ago
- 2f01fbd ts_TRXC_FAKE_RSSI(): define RSSI range, allow signed values by Vadim Yanitskiy · 5 years ago
- bb9512e bts: move f_pad_oct() to Osmocom_Types as it's generally useful by Harald Welte · 5 years ago
- ed0c156 bts: Initial set of OML tests by Harald Welte · 6 years ago
- be03048 bts: Verify SI3 GPRS indication reflects PCU interface status by Harald Welte · 5 years ago
- f1827a7 Extend BTS_Tests.ttcn with test for RSL MODE MODIFY with encryption IE by Eric Wild · 5 years ago
- e57e1a6 Extend BTS_Tests.ttcn with test for RSL channel activation with static MS Power by Eric Wild · 5 years ago
- c761c54 bts: TC_pcu_{time,rts}_ind: Higher tolerances by Harald Welte · 5 years ago
- c8effb7 bts: Verify PCU socket can disconnect + re-connect by Harald Welte · 5 years ago
- a2e0e94 bts: Add test ensuring only one connection to PCU interface accepted by Harald Welte · 5 years ago
- 6b86b34 Fix use of osmocom-extended RSL Channel Numbers by Harald Welte · 5 years ago
- 990a361 L1CTL: Add support for CCCH_MODE_COMBINED_CBCH by Harald Welte · 5 years ago
- 34b5a95 cosmetic: Update copyright statement, license notice and SPDX by Harald Welte · 5 years ago
- 1490695 bts: Add copyright + license header + short summary/explanation by Harald Welte · 5 years ago
- eaa9a86 bts: Add TC_pcu_rr_suspend() to test forwarding of RR SUSPEND via PCU socket by Harald Welte · 5 years ago
- 928622b bts: Add TC_pcu_data_req_pch() for testing PCU-originated PCH by Harald Welte · 5 years ago
- 7162a61 bts: Fully implement TC_pcu_data_req_{wrong_{bts,trx,ts},ts_inactive}() by Harald Welte · 5 years ago
- ad033dc bts: Fully implement TC_pcu_data_req_{pdtch,ptcch} by Harald Welte · 5 years ago
- 4832c86 bts: Add TC_pcu_rts_req() to verify PCUIF_RTS_REQ by Harald Welte · 5 years ago
- 07bd2d2 Add TC_pcu_oml_alert() for testing PCU-originated OML alerts by Harald Welte · 5 years ago
- d66c9b8 bts: Add Test for receiving PCUIF_TIME_IND on BTS PCU interface by Harald Welte · 5 years ago
- 3453ab4 bts: Add tests for CCCH LOAD IND (RACH) by Harald Welte · 5 years ago
- 6833cc9 bts: Extend BTS_Tests.ttcn with test for RSL channel activation with TA from initial activation onwards by Eric Wild · 5 years ago
- 4a129f8 bts: Add tests for CBCH LOAD IND (underflow, overflow) by Harald Welte · 5 years ago
- 60bd92b bts: Add TC_sms_cb_cmd_sdcch{4,8}_extd_multi by Harald Welte · 5 years ago
- d522ca0 bts: Test case for mixed NORMAL and DEFAULT SMSCB by Harald Welte · 5 years ago
- a3ff670 bts: Refactor code to support mixed DEFAULT + NORMAL and EXTENDED CBCH by Harald Welte · 5 years ago
- df4d0f0 bts: Test for removal of CBCH DEFAULT message by Harald Welte · 5 years ago
- 88e5dff bts: Add TC_sms_cb_cmd_cbch_sdcch{4,8}_default_only by Harald Welte · 5 years ago
- e0026c3 bts: Add TC_sms_cb_cmd_cbch_sdcch{4,8}_multi() by Harald Welte · 5 years ago
- 505cf9b bts: CBCH related tests for OsmoBTS by Harald Welte · 6 years ago
- 8b01c79 bts: Add TC_sacch_chan_act_ho_async + TC_sacch_chan_act_ho_sync by Harald Welte · 5 years ago
- c8d363c bts: Add TC_sacch_chan_act() to test SACCH INFO at RSL CHAN ACT by Harald Welte · 5 years ago
- ee25aae bts: Extend BTS_Tests.ttcn with test for RSL error handling by Harald Welte · 5 years ago
- e63229e BTS_Tests: use 0.0 as default for mp_ipa_up_delay by Philipp Maier · 5 years ago
- d95f340 BTS_Tests: wait until BTS supplies stable signal by Philipp Maier · 5 years ago
- 12567e4 BTS_Tests: default value for mp_ipa_up_timeout too low by Philipp Maier · 5 years ago
- 51cbc10 BTS_Tests.ttcn: add TC_pcu_ext_rach_content() for 11-bit RACH by Vadim Yanitskiy · 5 years ago
- 2c6f563 BTS: use PCU-related test cases as version string by Max · 5 years ago
- 6e05304 Log FN and RA in TC_rach_max_ta by Max · 5 years ago
- ba06feb TC_rach_content(): fail test explicitly by Max · 5 years ago
- a199a2e Log all RA values which cause test failure by Max · 5 years ago
- 1181f2d Log FN and RA on RACH test timeouts by Max · 5 years ago
- 446e07b bts: Fix race condition in f_dyn_ipa_pdch_(de)act by Pau Espin Pedrol · 5 years ago
- 2caf349 update expected results by Neels Hofmeyr · 6 years ago
- 44ff214 BTS_Tests.ttcn: fix: use TRXC interface of the BTS side, not BB by Vadim Yanitskiy · 6 years ago
- 4d1e9c9 BTS_Tests: Verify RSL MS POWER CONTROL and SACCH MS POWER LEVEL by Philipp Maier · 6 years ago
- a14a8af bts: Disable PCU related tests if PCU socket not configured by Pau Espin Pedrol · 6 years ago
- 315e471 bts: Introduce mp_ipa_up_timeout parameter by Pau Espin Pedrol · 6 years ago
- 6451b04 bts: f_est_dchan: verify Chan Rqd originated by RACH arrives on RSL by Pau Espin Pedrol · 6 years ago
- 0fcc4d3 BTS_Tests: Use Misc_Helpers.f_shutdown consistently by Daniel Willmann · 6 years ago
- 3dcf38f bts: Disable testing FACCH/H with real HW by Pau Espin Pedrol · 6 years ago
- e9571aa bts: Introduce mp_ul_rxlev_exp and use mp_rxlev_exp to craft meas rep by Pau Espin Pedrol · 6 years ago
- 4ebdad6 BTS_Tests.ttcn: fix: don't overwrite the expected meas results by Vadim Yanitskiy · 6 years ago
- aa1e60f add an IPA test which sends a chopped payload by Stefan Sperling · 6 years ago
- 0ec1c26 add chopped IPA ping test to BTS tests by Stefan Sperling · 6 years ago
- a0fb42a bts: f_tx_lapdm: Build SacchL1Header with proper values by Pau Espin Pedrol · 6 years ago
- 3567787 BTS_Tests.ttcn: fix: expect RSL_MEAS_RES messages by Vadim Yanitskiy · 6 years ago
- e0b91a7 BTS_Tests.ttcn: fix: properly detect Measurement Reports by Vadim Yanitskiy · 6 years ago
- 41baf00 BTS_Tests.ttcn: add 'lazy' mode for as_meas_res() by Vadim Yanitskiy · 6 years ago
- 99a7aca bts: Use f_L1CTL_PARAM to set expected ms power level for dummy MeasRep by Pau Espin Pedrol · 6 years ago
- ed359cb bts: Add parameter to set and expect a specific MS power level by Pau Espin Pedrol · 6 years ago
- b992050 BTS_Tests.ttcn: don't tolerate any RSL messages by default by Vadim Yanitskiy · 6 years ago
- 4d78a70 BTS_Tests.ttcn: fix: properly expect I-frames in f_TC_encr_cmd() by Vadim Yanitskiy · 6 years ago
- 8d8f91c BTS_Tests.ttcn: mark f_unitdata_mo() as private by Vadim Yanitskiy · 6 years ago
- ad131c8 BTS_Tests.ttcn: share as_rsl_sacch_ind() and as_rsl_any_ind() by Vadim Yanitskiy · 6 years ago
- 98e0315 BTS_Tests.ttcn: extend f_unitdata_mo() with tolerance parameters by Vadim Yanitskiy · 6 years ago
- 121724c bts: Add timing offset tolerance module parameter to support real HW by Pau Espin Pedrol · 6 years ago
- 9c3ff4e bts: Account for elapsed time in paging timer by Pau Espin Pedrol · 6 years ago
- f50e3ae bts: Add second VTY connection to BSC by Harald Welte · 6 years ago
- 43c5464 bts: update TODO comments; remove tests already covered by Harald Welte · 6 years ago
- 7b8c522 BTS: enable encryption + RLL tests for Lm (TCH/H) channels by Vadim Yanitskiy · 6 years ago
- 82cb0b1 BTS_Tests: check paging channel fn (bs_ag_blks_res) by Philipp Maier · 6 years ago
- 873ae20 update expected results by Neels Hofmeyr · 6 years ago
- 91d4c9d update DTX fill frame test expectations by Stefan Sperling · 6 years ago
- d65d056 bts_tests: do not define bs_ag_blks_res in multiple locations by Philipp Maier · 6 years ago
- 4880be4 add DTX fill frame BTS tests by Stefan Sperling · 6 years ago
- 23b4597 detect VTY TELNET port connection failures (attempt #2) by Stefan Sperling · 6 years ago
- b097009 BTS: enable encryption + RLL tests for Bm (TCH/F) channels by Vadim Yanitskiy · 6 years ago
- 31e7c67 BTS: fix: pad LAPDm frames before sending via L1CTL by Vadim Yanitskiy · 6 years ago
- bf3cf5c Revert "detect VTY TELNET port connection failures in TTCN3 tests" by Neels Hofmeyr · 6 years ago
- cb111b2 detect VTY TELNET port connection failures in TTCN3 tests by Stefan Sperling · 6 years ago
- cd9e86f update expected test result for TC_sacch_multi_chg by Stefan Sperling · 6 years ago