Harald Welte | 78e1cd2 | 2017-10-28 17:52:32 +0200 | [diff] [blame] | 1 | osmo-trx (0.2.0) unstable; urgency=medium |
| 2 | |
| 3 | [ Alexander Chemeris ] |
| 4 | * EDGE: Add support for UmTRX. |
| 5 | * Common: Get rid of a compilation warning. |
| 6 | * Common: Make sure gLogEarly() log to the same facilities as the normal log. |
| 7 | * transceiver: Properly handle MAXDLY. |
| 8 | * transceiver: Add an option to generate random Access Bursts. |
| 9 | * osmo-trx: Output Rx SPS as a part of configuration output. |
| 10 | * transceiver: Do not pass transceiver state struct to function where it's not used. |
| 11 | * makefile: Fix build from an external path. |
| 12 | * radioDevice: GSMRATE macro must have parentheses around its definition. |
| 13 | * uhd: Fix comment. |
| 14 | * radioInterface: Initialize power scale with a meaningful default. |
| 15 | * transceiver: Log channel number in DEBUG output of demoded bursts. |
| 16 | * transceiver: Add an option to emulate a RACH delay in random filler mode. |
| 17 | * UHD: Initial LimeSDR support. |
| 18 | * CommonLibs: Remove unused files. |
| 19 | * sigProcLib: Typo sybols -> symbols |
| 20 | * radioBuffer: Remove extra ; at the end of inline function definitions. |
| 21 | * sigProcLib: Fix documentation, sync argument names in .cpp and .h files. |
| 22 | * sigProcLib: make energyDetect() simpler by returning actual energy. |
| 23 | * sigProcLib: Rename demodulateBurst() to demodGmskBurst() for clarity. |
| 24 | * sigProcLib: Slice SoftVector instead of signalVector for GMSK demod. |
| 25 | * Call vectorSlicer() right before packing bits for transmission to osmo-bts. |
| 26 | * CommonLibs: Print soft bits with less confidence to console when printing a soft vector. |
| 27 | * BitVector: Remove convolutional codec - we don't use it in osmo-trx. |
| 28 | * BitVector: Convert SoftVector from 0..1 to -1..+1 soft bits. |
| 29 | * signalVector: Implement segment(). |
| 30 | * vector: Introduce segmentMove() method to move data inside of a vector. |
| 31 | * vector: Introduce shrink() function to shrink vector size without loosing data. |
| 32 | * Move CorrType type from Transceiver to sigProcLib. |
| 33 | * sigProcLib: rename signalError type to SignalError. |
| 34 | * Move Transceiver::detectBurst() to sigProcLib to make it reusable. |
| 35 | * Move BURST_THRESH from Transceiver.cpp to sigProcLib.h to make it reusable. |
| 36 | * sigProcLib: Add operator<< to print CorrType to a string. |
| 37 | * sigProcLib.h: Fix whitespaces. No non-whitespace changes. |
| 38 | * Move Transceiver::demodulate() to sigProcLib to make it reusable. |
| 39 | * sigProcLib: constify signalVector arguments for detectBurst() functions. |
| 40 | * sigProcLib: Constify demodulation functions burst argument. |
| 41 | * sigProcLib: Fix number of tail bits in random Normal Bursts and zero Stealing Bits. |
| 42 | * Configuration: Variables allocated with 'new' must be freed with 'delete'. |
| 43 | * BitVector: Remove Generator class. |
| 44 | * PRBS: a Pseudo-random binary sequence (PRBS) generator class. |
| 45 | |
| 46 | [ Tom Tsou ] |
| 47 | * EDGE: Fix USRP B210 device support |
| 48 | * uhd: Correct timing alignment in 8-PSK and GMSK downlink bursts |
| 49 | * EDGE: Fix demodulation slicer input |
| 50 | * common: Restrict UDP binding to localhost only |
| 51 | * common: Add mandatory length field to UDP receive calls |
| 52 | * uhd: Update default E3XX settings |
| 53 | * uhd: Set default Tx sampling to 4 sps |
| 54 | * uhd: Make device offset check a private method |
| 55 | * uhd: Set minimum UHD version requirement for E3XX |
| 56 | * sigproc: Expand RACH, TSC, and EDGE correlation windows |
| 57 | * transceiver: Do not report error on SETTSC when radio is on |
| 58 | * transceiver: Add Rx samples-per-symbol option |
| 59 | * radioInterface: Convert diversity argument to general type |
| 60 | * iface: Add inner ring-buffer implementation |
| 61 | * mcbts: Add multi-ARFCN channelizing filters |
| 62 | * mcbts: Add multi-ARFCN radio support |
| 63 | * sigproc: Adjust burst detection threshold criteria |
| 64 | * egprs: Enable 8-PSK length vectors on the Tx interface |
| 65 | * egprs: Enable 8-PSK burst detection when EDGE is enabled |
| 66 | * transceiver: Remove HANDOVER warnings |
| 67 | * mcbts: Allow out of order channel setup |
| 68 | * radioInterface: Fix multi-channel buffer index bug |
| 69 | * uhd: Add command line option for GPS reference |
| 70 | * transceiver: Fix mixed GSMK / 8-PSK transmission |
| 71 | * transceiver: Fix 4 SPS receive TOA value |
| 72 | * sigproc: Fix missing 8-PSK tail symbols |
| 73 | * uhd: Update USRP2/N200/N210 for 4 SPS Rx |
| 74 | * sigproc: Match differential GMSK start/end bits to tail bits |
| 75 | * uhd: Add missing B200 sample timing for 4 SPS receive |
| 76 | * transceiver: Fix command build warning |
| 77 | * uhd: Set minimum supported version to 3.9.0 |
| 78 | * uhd: Add X300 sample timing for 4 SPS |
| 79 | * Revert "uhd: Set minimum supported version to 3.9.0" |
| 80 | * uhd: Add support for UHD-3.11 logging control |
| 81 | * uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz |
| 82 | * Resampler: Fix initialization return checking |
| 83 | * sigProcLib: Remove unreachable code and no-effect checks |
| 84 | * sigProcLib: Check return status on downsampling |
| 85 | * sigProcLib: Fix negative value check on unsigned value |
| 86 | * Resampler: Fix non-array delete for filter taps |
| 87 | * Transceiver: Remove unsigned negative compares |
| 88 | * Configuration: Fix const and signedness compile warnings |
| 89 | * config: Remove OpenBTS style sqlite configuration |
| 90 | * radioInterface: Remove UmTRX 'diversity' option |
| 91 | * build: Require and check for gcc C++11 support |
| 92 | * uhd: Use map container for for device parameter access |
| 93 | * sigProcLib: Remove unused functions from public interface |
| 94 | * uhd: Add non-UmTRX channel swap support |
| 95 | * uhd: Fix Tx-RX timing offset setting |
| 96 | * uhd: Fix USRP2/N200/N210 device detection |
| 97 | * transceiver: Fix POWEROFF crash on USRP2/N200/X300 devices |
| 98 | * sigProcLib: Fix complex/real vector flag in Laurent modulator |
| 99 | * sigProcLib: Remove heap based signal vector allocations |
| 100 | * common: Declare explicit Vector move constructor |
| 101 | * sigProcLib: Remove trigonometric tables |
| 102 | * sigProcLib: Use explicit NaN check in sinc table generation |
| 103 | * sigProcLib: Replace dynamically allocated resampling buffers |
| 104 | * sigProcLib: Specify standard namespace for isnan() |
| 105 | * uhd: Always specify samples-per-symbol for device lookup |
| 106 | * LimeSDR: set approximate tx offset value to make GSM work |
| 107 | |
| 108 | [ Neels Hofmeyr ] |
| 109 | * add basic .gitignore |
| 110 | * configure.ac: check for boost/config.hpp header |
| 111 | * The INSTALL file is being overwritten by autoreconf, but it is committed as empty file. As a result, the INSTALL file always shows as modified. Instead, remove INSTALL from git and ignore it. |
| 112 | * add contrib/jenkins.sh, for gerrit build bot |
| 113 | |
| 114 | [ pierre.baudry ] |
| 115 | * transceiver: Fix mismatched allocations and deallocations |
| 116 | |
| 117 | [ Holger Hans Peter Freyther ] |
| 118 | * debian: Require fftw3 header files for osmo-trx |
| 119 | |
| 120 | [ Max ] |
| 121 | * Add gerrit settings |
| 122 | * Integrate Debian packaging changes |
| 123 | * Remove embedded sqlite3 |
| 124 | * Fix building against sqlite3 |
| 125 | * Add autoconf-archive to dependencies |
| 126 | * debian: remove obsolete dependency |
| 127 | * deb: remove unused dependency |
| 128 | * Remove redundant explicit dependency |
| 129 | * Use release helper from libosmocore |
| 130 | |
| 131 | [ Ruben Undheim ] |
| 132 | * Do not embed sqlite3 when building |
| 133 | |
| 134 | [ Philipp Maier ] |
| 135 | * buildenv: Turn off native architecture builds |
| 136 | * cosmetic: Make parameter lists uniform |
| 137 | * Add test program to verify convolution implementation |
| 138 | * ssedetect: Add runtime CPU detection |
| 139 | * cosmetic: remove code duplication |
| 140 | * buildenv: Make build CPU invariant |
| 141 | * buildenv: Split up SSE3 and SSE4.1 code |
| 142 | * cosmetic: Add info about SSE support |
| 143 | |
| 144 | [ Vadim Yanitskiy ] |
| 145 | * buildenv: correct the ax_sse macro description |
| 146 | * buildenv: actually strip unused cpuid functionality |
| 147 | * buildenv: fix build on systems without SIMD support |
| 148 | * buildenv: cosmetic changes |
| 149 | * buildenv: check for __builtin_cpu_supports call support |
| 150 | * ssedetect: call __builtin_cpu_supports() only if supported |
| 151 | |
| 152 | [ Pau Espin Pedrol ] |
| 153 | * cosmetic: transciever: Remove trailing whitespaces |
| 154 | * transceiver: Avoid sending clock indications when trx is not powered on |
| 155 | * Add -j option to bind to specific address |
| 156 | |
| 157 | [ ignasj ] |
| 158 | * LimeSDR: Change device detection to work with USB and PCIe versions |
| 159 | * LimeSDR: change tx window type to TX_WINDOW_FIXED |
| 160 | * LimeSDR: Fix sample value range |
| 161 | |
| 162 | [ Harald Welte ] |
| 163 | * Add '-t' command line option to enable SCHED_RR |
| 164 | * Import git-version-gen and update AC_INIT() |
| 165 | |
| 166 | -- Harald Welte <laforge@gnumonks.org> Sat, 28 Oct 2017 17:52:32 +0200 |
| 167 | |
Holger Hans Peter Freyther | d17b189 | 2016-03-18 20:13:23 +0100 | [diff] [blame] | 168 | osmo-trx (0.1.9) trusty; urgency=medium |
| 169 | |
| 170 | * Ask Ivan, really |
| 171 | |
| 172 | -- Kirill Zakharenko <earwin@gmail.com> Thu, 16 Jul 2015 12:13:46 +0000 |
| 173 | |
| 174 | osmo-trx (0.1.8) precise; urgency=low |
| 175 | |
| 176 | * Initial release (Closes: #nnnn) <nnnn is the bug number of your ITP |
| 177 | |
| 178 | -- Ivan Klyuchnikov <Ivan.Kluchnikov@fairwaves.ru> Sun, 9 Mar 2014 14:10:10 +0400 |