| /* MSC interface to quagga VTY */ |
| /* (C) 2016-2018 by sysmocom s.m.f.c. GmbH <info@sysmocom.de> |
| * Based on OpenBSC interface to quagga VTY (libmsc/vty_interface_layer3.c) |
| * (C) 2009-2017 by Harald Welte <laforge@gnumonks.org> |
| * (C) 2009-2011 by Holger Hans Peter Freyther |
| * All Rights Reserved |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU Affero General Public License as published by |
| * the Free Software Foundation; either version 3 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU Affero General Public License for more details. |
| * |
| * You should have received a copy of the GNU Affero General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| */ |
| |
| /* NOTE: I would have liked to call this the MSC_NODE instead of the MSC_NODE, |
| * but MSC_NODE already exists to configure a remote MSC for osmo-bsc. */ |
| |
| #include "config.h" |
| |
| #include <inttypes.h> |
| #include <limits.h> |
| |
| #include <osmocom/core/use_count.h> |
| |
| #include <osmocom/gsm/protocol/gsm_08_58.h> |
| #include <osmocom/gsm/protocol/gsm_04_14.h> |
| #include <osmocom/gsm/protocol/gsm_08_08.h> |
| #include <osmocom/gsm/gsm23236.h> |
| |
| #include <osmocom/sigtran/sccp_helpers.h> |
| |
| #include <osmocom/vty/tdef_vty.h> |
| #include <osmocom/vty/command.h> |
| #include <osmocom/vty/logging.h> |
| #include <osmocom/vty/misc.h> |
| #include <osmocom/vty/stats.h> |
| |
| #ifdef BUILD_IU |
| #include <osmocom/ranap/iu_client.h> |
| #endif |
| |
| #include <osmocom/msc/vty.h> |
| #include <osmocom/msc/gsm_data.h> |
| #include <osmocom/msc/gsm_subscriber.h> |
| #include <osmocom/msc/msub.h> |
| #include <osmocom/msc/msc_a.h> |
| #include <osmocom/msc/vlr.h> |
| #include <osmocom/msc/transaction.h> |
| #include <osmocom/msc/db.h> |
| #include <osmocom/msc/sms_queue.h> |
| #include <osmocom/msc/silent_call.h> |
| #include <osmocom/msc/gsm_04_80.h> |
| #include <osmocom/msc/gsm_04_14.h> |
| #include <osmocom/msc/signal.h> |
| #include <osmocom/msc/mncc_int.h> |
| #include <osmocom/msc/osmux.h> |
| #include <osmocom/msc/rrlp.h> |
| #include <osmocom/msc/vlr_sgs.h> |
| #include <osmocom/msc/sgs_vty.h> |
| #include <osmocom/msc/sccp_ran.h> |
| #include <osmocom/msc/ran_peer.h> |
| #include <osmocom/msc/ran_infra.h> |
| |
| static struct gsm_network *gsmnet = NULL; |
| |
| static struct cmd_node net_node = { |
| GSMNET_NODE, |
| "%s(config-net)# ", |
| 1, |
| }; |
| |
| #define VSUB_USE_VTY "VTY" |
| |
| #define NETWORK_STR "Configure the GSM network\n" |
| #define CODE_CMD_STR "Code commands\n" |
| #define NAME_CMD_STR "Name Commands\n" |
| #define NAME_STR "Name to use\n" |
| |
| DEFUN(cfg_net, |
| cfg_net_cmd, |
| "network", NETWORK_STR) |
| { |
| vty->index = gsmnet; |
| vty->node = GSMNET_NODE; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_ncc, |
| cfg_net_ncc_cmd, |
| "network country code <1-999>", |
| "Set the GSM network country code\n" |
| "Country commands\n" |
| CODE_CMD_STR |
| "Network Country Code to use\n") |
| { |
| gsmnet->plmn.mcc = atoi(argv[0]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_mnc, |
| cfg_net_mnc_cmd, |
| "mobile network code <0-999>", |
| "Set the GSM mobile network code\n" |
| "Network Commands\n" |
| CODE_CMD_STR |
| "Mobile Network Code to use\n") |
| { |
| uint16_t mnc; |
| bool mnc_3_digits; |
| |
| if (osmo_mnc_from_str(argv[0], &mnc, &mnc_3_digits)) { |
| vty_out(vty, "%% Error decoding MNC: %s%s", argv[0], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| gsmnet->plmn.mnc = mnc; |
| gsmnet->plmn.mnc_3_digits = mnc_3_digits; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_name_short, |
| cfg_net_name_short_cmd, |
| "short name NAME", |
| "Set the short GSM network name\n" NAME_CMD_STR NAME_STR) |
| { |
| osmo_talloc_replace_string(gsmnet, &gsmnet->name_short, argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_name_long, |
| cfg_net_name_long_cmd, |
| "long name NAME", |
| "Set the long GSM network name\n" NAME_CMD_STR NAME_STR) |
| { |
| osmo_talloc_replace_string(gsmnet, &gsmnet->name_long, argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| #define ENCRYPTION_STR "Encryption options\n" |
| |
| DEFUN(cfg_net_encryption, |
| cfg_net_encryption_cmd, |
| "encryption a5 <0-4> [<0-4>] [<0-4>] [<0-4>] [<0-4>]", |
| ENCRYPTION_STR |
| "GSM A5 Air Interface Encryption.\n" |
| "A5/n Algorithm Number\n" |
| "A5/n Algorithm Number\n" |
| "A5/n Algorithm Number\n" |
| "A5/n Algorithm Number\n" |
| "A5/n Algorithm Number\n") |
| { |
| unsigned int i; |
| |
| gsmnet->a5_encryption_mask = 0; |
| for (i = 0; i < argc; i++) |
| gsmnet->a5_encryption_mask |= (1 << atoi(argv[i])); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_encryption_uea, |
| cfg_net_encryption_uea_cmd, |
| "encryption uea <0-2> [<0-2>] [<0-2>]", |
| ENCRYPTION_STR |
| "UTRAN (3G) encryption algorithms to allow: 0 = UEA0 (no encryption), 1 = UEA1, 2 = UEA2.\n" |
| "UEAn Algorithm Number\n" |
| "UEAn Algorithm Number\n" |
| "UEAn Algorithm Number\n" |
| ) |
| { |
| unsigned int i; |
| |
| gsmnet->uea_encryption_mask = 0; |
| for (i = 0; i < argc; i++) |
| gsmnet->uea_encryption_mask |= (1 << atoi(argv[i])); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_authentication, |
| cfg_net_authentication_cmd, |
| "authentication (optional|required)", |
| "Whether to enforce MS authentication in 2G\n" |
| "Allow MS to attach via 2G BSC without authentication\n" |
| "Always do authentication\n") |
| { |
| gsmnet->authentication_required = (argv[0][0] == 'r') ? true : false; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_rrlp_mode, cfg_net_rrlp_mode_cmd, |
| "rrlp mode (none|ms-based|ms-preferred|ass-preferred)", |
| "Radio Resource Location Protocol\n" |
| "Set the Radio Resource Location Protocol Mode\n" |
| "Don't send RRLP request\n" |
| "Request MS-based location\n" |
| "Request any location, prefer MS-based\n" |
| "Request any location, prefer MS-assisted\n") |
| { |
| gsmnet->rrlp.mode = msc_rrlp_mode_parse(argv[0]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_mm_info, cfg_net_mm_info_cmd, |
| "mm info (0|1)", |
| "Mobility Management\n" |
| "Send MM INFO after LOC UPD ACCEPT\n" |
| "Disable\n" "Enable\n") |
| { |
| gsmnet->send_mm_info = atoi(argv[0]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_timezone, |
| cfg_net_timezone_cmd, |
| "timezone <-19-19> (0|15|30|45)", |
| "Set the Timezone Offset of the network\n" |
| "Timezone offset (hours)\n" |
| "Timezone offset (00 minutes)\n" |
| "Timezone offset (15 minutes)\n" |
| "Timezone offset (30 minutes)\n" |
| "Timezone offset (45 minutes)\n" |
| ) |
| { |
| struct gsm_network *net = vty->index; |
| int tzhr = atoi(argv[0]); |
| int tzmn = atoi(argv[1]); |
| |
| net->tz.hr = tzhr; |
| net->tz.mn = tzmn; |
| net->tz.dst = 0; |
| net->tz.override = 1; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_timezone_dst, |
| cfg_net_timezone_dst_cmd, |
| "timezone <-19-19> (0|15|30|45) <0-2>", |
| "Set the Timezone Offset of the network\n" |
| "Timezone offset (hours)\n" |
| "Timezone offset (00 minutes)\n" |
| "Timezone offset (15 minutes)\n" |
| "Timezone offset (30 minutes)\n" |
| "Timezone offset (45 minutes)\n" |
| "DST offset (hours)\n" |
| ) |
| { |
| struct gsm_network *net = vty->index; |
| int tzhr = atoi(argv[0]); |
| int tzmn = atoi(argv[1]); |
| int tzdst = atoi(argv[2]); |
| |
| net->tz.hr = tzhr; |
| net->tz.mn = tzmn; |
| net->tz.dst = tzdst; |
| net->tz.override = 1; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_no_timezone, |
| cfg_net_no_timezone_cmd, |
| "no timezone", |
| NO_STR |
| "Disable network timezone override, use system tz\n") |
| { |
| struct gsm_network *net = vty->index; |
| |
| net->tz.override = 0; |
| |
| return CMD_SUCCESS; |
| } |
| |
| /* NOTE: actually this is subscriber expiration timeout */ |
| #define PER_LOC_UPD_STR "Periodic Location Updating Interval\n" |
| |
| DEFUN_DEPRECATED(cfg_net_per_loc_upd, cfg_net_per_loc_upd_cmd, |
| "periodic location update <6-1530>", |
| PER_LOC_UPD_STR PER_LOC_UPD_STR PER_LOC_UPD_STR |
| "Periodic Location Updating Interval in Minutes\n") |
| { |
| int minutes = atoi(argv[0]); |
| int rc; |
| |
| vty_out(vty, "%% 'periodic location update' is now deprecated. " |
| "Use 'msc' / 'timer vlr T3212' to change subscriber expiration " |
| "timeout.%s", VTY_NEWLINE); |
| |
| /* We used to double this value and add a minute when scheduling the |
| * expiration timer. Let's emulate the old behaviour here. */ |
| minutes = minutes * 2 + 1; |
| vty_out(vty, "%% Setting T3212 to %d minutes " |
| "(emulating the old behaviour).%s", |
| minutes, VTY_NEWLINE); |
| |
| rc = osmo_tdef_set(msc_tdefs_vlr, 3212, minutes, OSMO_TDEF_M); |
| return rc ? CMD_WARNING : CMD_SUCCESS; |
| } |
| |
| DEFUN_DEPRECATED(cfg_net_no_per_loc_upd, cfg_net_no_per_loc_upd_cmd, |
| "no periodic location update", |
| NO_STR PER_LOC_UPD_STR PER_LOC_UPD_STR PER_LOC_UPD_STR) |
| { |
| int rc; |
| |
| vty_out(vty, "%% 'periodic location update' is now deprecated: " |
| "use 'timer T3212' to change subscriber expiration " |
| "timeout.%s", VTY_NEWLINE); |
| |
| rc = osmo_tdef_set(msc_tdefs_vlr, 3212, 0, OSMO_TDEF_M); |
| return rc ? CMD_WARNING : CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_call_wait, cfg_net_call_wait_cmd, |
| "call-waiting", |
| "Enable Call Waiting on the Network\n") |
| { |
| struct gsm_network *net = vty->index; |
| |
| net->call_waiting = true; |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_net_no_call_wait, cfg_net_no_call_wait_cmd, |
| "no call-waiting", |
| NO_STR |
| "Disable Call Waiting on the Network\n") |
| { |
| struct gsm_network *net = vty->index; |
| |
| net->call_waiting = false; |
| |
| return CMD_SUCCESS; |
| } |
| |
| static int config_write_net(struct vty *vty) |
| { |
| int i; |
| |
| vty_out(vty, "network%s", VTY_NEWLINE); |
| vty_out(vty, " network country code %s%s", osmo_mcc_name(gsmnet->plmn.mcc), VTY_NEWLINE); |
| vty_out(vty, " mobile network code %s%s", |
| osmo_mnc_name(gsmnet->plmn.mnc, gsmnet->plmn.mnc_3_digits), VTY_NEWLINE); |
| vty_out(vty, " short name %s%s", gsmnet->name_short, VTY_NEWLINE); |
| vty_out(vty, " long name %s%s", gsmnet->name_long, VTY_NEWLINE); |
| vty_out(vty, " encryption a5"); |
| for (i = 0; i < 8; i++) { |
| if (gsmnet->a5_encryption_mask & (1 << i)) |
| vty_out(vty, " %u", i); |
| } |
| vty_out(vty, "%s", VTY_NEWLINE); |
| |
| vty_out(vty, " encryption uea"); |
| for (i = 0; i < 8; i++) { |
| if (gsmnet->uea_encryption_mask & (1 << i)) |
| vty_out(vty, " %u", i); |
| } |
| vty_out(vty, "%s", VTY_NEWLINE); |
| vty_out(vty, " authentication %s%s", |
| gsmnet->authentication_required ? "required" : "optional", VTY_NEWLINE); |
| vty_out(vty, " rrlp mode %s%s", msc_rrlp_mode_name(gsmnet->rrlp.mode), |
| VTY_NEWLINE); |
| vty_out(vty, " mm info %u%s", gsmnet->send_mm_info, VTY_NEWLINE); |
| if (gsmnet->tz.override != 0) { |
| if (gsmnet->tz.dst) |
| vty_out(vty, " timezone %d %d %d%s", |
| gsmnet->tz.hr, gsmnet->tz.mn, gsmnet->tz.dst, |
| VTY_NEWLINE); |
| else |
| vty_out(vty, " timezone %d %d%s", |
| gsmnet->tz.hr, gsmnet->tz.mn, VTY_NEWLINE); |
| } |
| |
| if (!gsmnet->call_waiting) |
| vty_out(vty, " no call-waiting%s", VTY_NEWLINE); |
| |
| return CMD_SUCCESS; |
| } |
| |
| static struct cmd_node msc_node = { |
| MSC_NODE, |
| "%s(config-msc)# ", |
| 1, |
| }; |
| |
| DEFUN(cfg_msc, cfg_msc_cmd, |
| "msc", "Configure MSC options") |
| { |
| vty->node = MSC_NODE; |
| return CMD_SUCCESS; |
| } |
| |
| #define MNCC_STR "Configure Mobile Network Call Control\n" |
| #define MNCC_GUARD_TIMEOUT_STR "Set global guard timer for mncc interface activity\n" |
| #define MNCC_GUARD_TIMEOUT_VALUE_STR "guard timer value (sec.)\n" |
| |
| DEFUN(cfg_sms_database, cfg_sms_database_cmd, |
| "sms-database PATH", |
| "Set the path to the MSC-SMS database file\n" |
| "Relative or absolute file system path to the database file (default is '" SMS_DEFAULT_DB_FILE_PATH "')\n") |
| { |
| osmo_talloc_replace_string(gsmnet, &gsmnet->sms_db_file_path, argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_mncc_internal, |
| cfg_msc_mncc_internal_cmd, |
| "mncc internal", |
| MNCC_STR "Use internal MNCC handler (default; changes need a program restart)\n") |
| { |
| gsm_network_set_mncc_sock_path(gsmnet, NULL); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_mncc_external, |
| cfg_msc_mncc_external_cmd, |
| "mncc external MNCC_SOCKET_PATH", |
| MNCC_STR "Use external MNCC handler (changes need a program restart)\n" |
| "File system path to create the MNCC unix domain socket at\n") |
| { |
| gsm_network_set_mncc_sock_path(gsmnet, argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_mncc_guard_timeout, |
| cfg_msc_mncc_guard_timeout_cmd, |
| "mncc guard-timeout <0-255>", |
| MNCC_STR |
| MNCC_GUARD_TIMEOUT_STR MNCC_GUARD_TIMEOUT_VALUE_STR) |
| { |
| gsmnet->mncc_guard_timeout = atoi(argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| ALIAS_DEPRECATED(cfg_msc_mncc_guard_timeout, |
| cfg_msc_deprecated_mncc_guard_timeout_cmd, |
| "mncc-guard-timeout <0-255>", |
| MNCC_GUARD_TIMEOUT_STR MNCC_GUARD_TIMEOUT_VALUE_STR); |
| |
| #define NCSS_STR "Configure call independent Supplementary Services\n" |
| |
| DEFUN(cfg_msc_ncss_guard_timeout, |
| cfg_msc_ncss_guard_timeout_cmd, |
| "ncss guard-timeout <0-255>", |
| NCSS_STR "Set guard timer for session activity\n" |
| "guard timer value (sec.), or 0 to disable\n") |
| { |
| gsmnet->ncss_guard_timeout = atoi(argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_assign_tmsi, cfg_msc_assign_tmsi_cmd, |
| "assign-tmsi", |
| "Assign TMSI during Location Updating.\n") |
| { |
| gsmnet->vlr->cfg.assign_tmsi = true; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_no_assign_tmsi, cfg_msc_no_assign_tmsi_cmd, |
| "no assign-tmsi", |
| NO_STR "Assign TMSI during Location Updating.\n") |
| { |
| gsmnet->vlr->cfg.assign_tmsi = false; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN_ATTR(cfg_msc_lcls_disable, cfg_msc_lcls_disable_cmd, |
| "lcls-permitted", |
| "Globally allow LCLS (Local Call Local Switch) for all calls on this MSC.\n", |
| CMD_ATTR_IMMEDIATE) |
| { |
| gsmnet->lcls_permitted = true; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN_ATTR(cfg_msc_no_lcls_disable, cfg_msc_no_lcls_disable_cmd, |
| "no lcls-permitted", |
| NO_STR "Globally disable LCLS (Local Call Local Switch) for all calls on this MSC.\n", |
| CMD_ATTR_IMMEDIATE) |
| { |
| gsmnet->lcls_permitted = false; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_cs7_instance_a, |
| cfg_msc_cs7_instance_a_cmd, |
| "cs7-instance-a <0-15>", |
| "Set SS7 to be used by the A-Interface.\n" "SS7 instance reference number\n") |
| { |
| gsmnet->a.cs7_instance = atoi(argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_cs7_instance_iu, |
| cfg_msc_cs7_instance_iu_cmd, |
| "cs7-instance-iu <0-15>", |
| "Set SS7 to be used by the Iu-Interface.\n" "SS7 instance reference number\n") |
| { |
| #if BUILD_IU |
| gsmnet->iu.cs7_instance = atoi(argv[0]); |
| return CMD_SUCCESS; |
| #else |
| vty_out(vty, "WARNING: 'cs7-instance-iu' without effect: built without Iu support%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| #endif |
| } |
| |
| DEFUN(cfg_msc_auth_tuple_max_reuse_count, cfg_msc_auth_tuple_max_reuse_count_cmd, |
| "auth-tuple-max-reuse-count <-1-2147483647>", |
| "Configure authentication tuple re-use\n" |
| "0 to use each auth tuple at most once (default), >0 to limit re-use, -1 to re-use infinitely (vulnerable!).\n") |
| { |
| gsmnet->vlr->cfg.auth_tuple_max_reuse_count = atoi(argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_auth_tuple_reuse_on_error, cfg_msc_auth_tuple_reuse_on_error_cmd, |
| "auth-tuple-reuse-on-error (0|1)", |
| "Configure authentication tuple re-use when HLR is not responsive\n" |
| "Never re-use auth tuples beyond auth-tuple-max-reuse-count (default)\n" |
| "If the HLR does not deliver new tuples, do re-use already available old ones.\n") |
| { |
| gsmnet->vlr->cfg.auth_reuse_old_sets_on_error = atoi(argv[0]) ? true : false; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_check_imei_rqd, cfg_msc_check_imei_rqd_cmd, |
| "check-imei-rqd (0|1|early)", |
| "Send each IMEI to the EIR to ask if it is permitted or not. The EIR is implemented as part of OsmoHLR, " |
| "and can optionally save the IMEI in the HLR.\n" |
| "Do not send IMEIs to the EIR\n" |
| "Send each IMEI to the EIR\n" |
| "Send each IMEI to the EIR, and do it at the start of the location update. This allows the EIR to receive the" |
| " IMEI, even if the MS would get rejected when the MSC sends the location update request to the HLR.\n") |
| { |
| if (strcmp(argv[0], "0") == 0) { |
| gsmnet->vlr->cfg.check_imei_rqd = false; |
| gsmnet->vlr->cfg.retrieve_imeisv_early = false; |
| } else if (strcmp(argv[0], "1") == 0) { |
| gsmnet->vlr->cfg.check_imei_rqd = true; |
| gsmnet->vlr->cfg.retrieve_imeisv_early = false; |
| } else if (strcmp(argv[0], "early") == 0) { |
| gsmnet->vlr->cfg.check_imei_rqd = true; |
| gsmnet->vlr->cfg.retrieve_imeisv_early = true; |
| } |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN_DEPRECATED(cfg_msc_paging_response_timer, cfg_msc_paging_response_timer_cmd, |
| "paging response-timer (default|<1-65535>)", |
| "Configure Paging\n" |
| "Set Paging timeout, the minimum time to pass between (unsuccessful) Pagings sent towards" |
| " BSS or RNC\n" |
| "Set to default timeout (" OSMO_STRINGIFY_VAL(MSC_PAGING_RESPONSE_TIMER_DEFAULT) " seconds)\n" |
| "Set paging timeout in seconds\n") |
| { |
| int rat; |
| int paging_response_timer; |
| if (!strcmp(argv[0], "default")) |
| paging_response_timer = MSC_PAGING_RESPONSE_TIMER_DEFAULT; |
| else |
| paging_response_timer = atoi(argv[0]); |
| |
| for (rat = 0; rat < OSMO_RAT_COUNT; rat++) { |
| osmo_tdef_set(msc_ran_infra[rat].tdefs, -4, paging_response_timer, OSMO_TDEF_S); |
| } |
| |
| vty_out(vty, "%% paging response-timer is deprecated.%s" |
| "%% All ran timer has been modified.%s" |
| "%% use 'timer <geran|utran|sgs> X4 %s' instead%s", |
| VTY_NEWLINE, VTY_NEWLINE, argv[0], VTY_NEWLINE); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_emergency_msisdn, cfg_msc_emergency_msisdn_cmd, |
| "emergency-call route-to-msisdn MSISDN", |
| "Configure Emergency Call Behaviour\n" |
| "MSISDN to which Emergency Calls are Dispatched\n" |
| "MSISDN (E.164 Phone Number)\n") |
| { |
| osmo_talloc_replace_string(gsmnet, &gsmnet->emergency.route_to_msisdn, argv[0]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| /* TODO: to be deprecated as soon as we rip SMS handling out (see OS#3587) */ |
| DEFUN(cfg_msc_sms_over_gsup, cfg_msc_sms_over_gsup_cmd, |
| "sms-over-gsup", |
| "Enable routing of SMS messages over GSUP\n") |
| { |
| gsmnet->sms_over_gsup = true; |
| return CMD_SUCCESS; |
| } |
| |
| /* TODO: to be deprecated as soon as we rip SMS handling out (see OS#3587) */ |
| DEFUN(cfg_msc_no_sms_over_gsup, cfg_msc_no_sms_over_gsup_cmd, |
| "no sms-over-gsup", |
| NO_STR "Disable routing of SMS messages over GSUP\n") |
| { |
| gsmnet->sms_over_gsup = false; |
| return CMD_SUCCESS; |
| } |
| |
| /* FIXME: This should rather be in the form of |
| * handover-number range 001234xxx |
| * and |
| * handover-number range 001234xxx FIRST LAST |
| */ |
| DEFUN(cfg_msc_handover_number_range, cfg_msc_handover_number_range_cmd, |
| "handover-number range MSISDN_FIRST MSISDN_LAST", |
| "Configure a range of MSISDN to be assigned to incoming inter-MSC Handovers for call forwarding.\n" |
| "Configure a handover number range\n" |
| "First Handover Number MSISDN\n" |
| "Last Handover Number MSISDN\n") |
| { |
| char *endp; |
| uint64_t range_start; |
| uint64_t range_end; |
| |
| /* FIXME leading zeros?? */ |
| |
| errno = 0; |
| range_start = strtoull(argv[0], &endp, 10); |
| if (errno || *endp != '\0') { |
| vty_out(vty, "%% Error parsing handover-number range start: %s%s", |
| argv[0], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| errno = 0; |
| range_end = strtoull(argv[1], &endp, 10); |
| if (errno || *endp != '\0') { |
| vty_out(vty, "%% Error parsing handover-number range end: %s%s", |
| argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (range_start > range_end) { |
| vty_out(vty, "%% Error: handover-number range end must be > than the range start, but" |
| " %"PRIu64" > %"PRIu64"%s", range_start, range_end, VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| gsmnet->handover_number.range_start = range_start; |
| gsmnet->handover_number.range_end = range_end; |
| return CMD_SUCCESS; |
| } |
| |
| #define OSMUX_STR "RTP multiplexing\n" |
| DEFUN(cfg_msc_osmux, |
| cfg_msc_osmux_cmd, |
| "osmux (on|off|only)", |
| OSMUX_STR "Enable OSMUX\n" "Disable OSMUX\n" "Only use OSMUX\n") |
| { |
| if (strcmp(argv[0], "off") == 0) |
| gsmnet->use_osmux = OSMUX_USAGE_OFF; |
| else if (strcmp(argv[0], "on") == 0) |
| gsmnet->use_osmux = OSMUX_USAGE_ON; |
| else if (strcmp(argv[0], "only") == 0) |
| gsmnet->use_osmux = OSMUX_USAGE_ONLY; |
| |
| return CMD_SUCCESS; |
| } |
| |
| #define NRI_STR "Mapping of Network Resource Indicators to this MSC, for MSC pooling\n" |
| DEFUN(cfg_msc_nri_bitlen, cfg_msc_nri_bitlen_cmd, |
| "nri bitlen <0-15>", |
| NRI_STR |
| "Set number of NRI bits to place in TMSI identities (always starting just after the most significant octet)\n" |
| "bit count (default: " OSMO_STRINGIFY_VAL(NRI_BITLEN_DEFAULT) ")\n") |
| { |
| gsmnet->vlr->cfg.nri_bitlen = atoi(argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| #define NRI_STR "Mapping of Network Resource Indicators to this MSC, for MSC pooling\n" |
| #define NRI_ARGS_TO_STR_FMT "%s%s%s" |
| #define NRI_ARGS_TO_STR_ARGS(ARGC, ARGV) ARGV[0], (ARGC>1)? ".." : "", (ARGC>1)? ARGV[1] : "" |
| #define NRI_FIRST_LAST_STR "First value of the NRI value range, should not surpass the configured 'nri bitlen'.\n" \ |
| "Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the" \ |
| " first value; if omitted, apply only the first value.\n" |
| |
| DEFUN(cfg_msc_nri_add, cfg_msc_nri_add_cmd, |
| "nri add <0-32767> [<0-32767>]", |
| NRI_STR "Add NRI value or range to the NRI mapping for this MSC\n" |
| NRI_FIRST_LAST_STR) |
| { |
| const char *message; |
| int rc = osmo_nri_ranges_vty_add(&message, NULL, gsmnet->vlr->cfg.nri_ranges, argc, argv, gsmnet->vlr->cfg.nri_bitlen); |
| if (message) { |
| vty_out(vty, "%% %s: " NRI_ARGS_TO_STR_FMT, message, NRI_ARGS_TO_STR_ARGS(argc, argv)); |
| } |
| if (rc < 0) |
| return CMD_WARNING; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_msc_nri_del, cfg_msc_nri_del_cmd, |
| "nri del <0-32767> [<0-32767>]", |
| NRI_STR "Remove NRI value or range from the NRI mapping for this MSC\n" |
| NRI_FIRST_LAST_STR) |
| { |
| const char *message; |
| int rc = osmo_nri_ranges_vty_del(&message, NULL, gsmnet->vlr->cfg.nri_ranges, argc, argv); |
| if (message) { |
| vty_out(vty, "%% %s: " NRI_ARGS_TO_STR_FMT, message, NRI_ARGS_TO_STR_ARGS(argc, argv)); |
| } |
| if (rc < 0) |
| return CMD_WARNING; |
| return CMD_SUCCESS; |
| } |
| |
| static void msc_write_nri(struct vty *vty) |
| { |
| struct osmo_nri_range *r; |
| |
| llist_for_each_entry(r, &gsmnet->vlr->cfg.nri_ranges->entries, entry) { |
| if (osmo_nri_range_validate(r, 255)) |
| vty_out(vty, " %% INVALID RANGE:"); |
| vty_out(vty, " nri add %d", r->first); |
| if (r->first != r->last) |
| vty_out(vty, " %d", r->last); |
| vty_out(vty, "%s", VTY_NEWLINE); |
| } |
| } |
| |
| DEFUN(show_nri, show_nri_cmd, |
| "show nri", |
| SHOW_STR NRI_STR) |
| { |
| msc_write_nri(vty); |
| return CMD_SUCCESS; |
| } |
| |
| static int config_write_msc(struct vty *vty) |
| { |
| vty_out(vty, "msc%s", VTY_NEWLINE); |
| if (gsmnet->sms_db_file_path && strcmp(gsmnet->sms_db_file_path, SMS_DEFAULT_DB_FILE_PATH)) |
| vty_out(vty, " sms-database %s%s", gsmnet->sms_db_file_path, VTY_NEWLINE); |
| if (gsmnet->mncc_sock_path) |
| vty_out(vty, " mncc external %s%s", gsmnet->mncc_sock_path, VTY_NEWLINE); |
| vty_out(vty, " mncc guard-timeout %i%s", |
| gsmnet->mncc_guard_timeout, VTY_NEWLINE); |
| vty_out(vty, " ncss guard-timeout %i%s", |
| gsmnet->ncss_guard_timeout, VTY_NEWLINE); |
| vty_out(vty, " %sassign-tmsi%s", |
| gsmnet->vlr->cfg.assign_tmsi? "" : "no ", VTY_NEWLINE); |
| if (gsmnet->lcls_permitted) |
| vty_out(vty, " lcls-permitted%s", VTY_NEWLINE); |
| |
| vty_out(vty, " cs7-instance-a %u%s", gsmnet->a.cs7_instance, |
| VTY_NEWLINE); |
| #if BUILD_IU |
| vty_out(vty, " cs7-instance-iu %u%s", gsmnet->iu.cs7_instance, |
| VTY_NEWLINE); |
| #endif |
| |
| if (gsmnet->vlr->cfg.auth_tuple_max_reuse_count) |
| vty_out(vty, " auth-tuple-max-reuse-count %d%s", |
| OSMO_MAX(-1, gsmnet->vlr->cfg.auth_tuple_max_reuse_count), |
| VTY_NEWLINE); |
| if (gsmnet->vlr->cfg.auth_reuse_old_sets_on_error) |
| vty_out(vty, " auth-tuple-reuse-on-error 1%s", |
| VTY_NEWLINE); |
| |
| if (gsmnet->vlr->cfg.check_imei_rqd) { |
| if (gsmnet->vlr->cfg.retrieve_imeisv_early) |
| vty_out(vty, " check-imei-rqd early%s", VTY_NEWLINE); |
| else |
| vty_out(vty, " check-imei-rqd 1%s", VTY_NEWLINE); |
| } |
| |
| if (gsmnet->emergency.route_to_msisdn) { |
| vty_out(vty, " emergency-call route-to-msisdn %s%s", |
| gsmnet->emergency.route_to_msisdn, VTY_NEWLINE); |
| } |
| |
| if (gsmnet->sms_over_gsup) |
| vty_out(vty, " sms-over-gsup%s", VTY_NEWLINE); |
| |
| if (gsmnet->handover_number.range_start || gsmnet->handover_number.range_end) |
| vty_out(vty, " handover-number range %"PRIu64" %"PRIu64"%s", |
| gsmnet->handover_number.range_start, gsmnet->handover_number.range_end, |
| VTY_NEWLINE); |
| |
| if (gsmnet->use_osmux != OSMUX_USAGE_OFF) { |
| vty_out(vty, " osmux %s%s", gsmnet->use_osmux == OSMUX_USAGE_ON ? "on" : "only", |
| VTY_NEWLINE); |
| } |
| |
| mgcp_client_config_write(vty, " "); |
| #ifdef BUILD_IU |
| ranap_iu_vty_config_write(vty, " "); |
| #endif |
| |
| neighbor_ident_vty_write(vty); |
| |
| /* Timer introspection commands (generic osmo_tdef API) */ |
| osmo_tdef_vty_groups_write(vty, " "); |
| |
| msc_write_nri(vty); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(show_bsc, show_bsc_cmd, |
| "show bsc", SHOW_STR "BSC\n") |
| { |
| struct ran_peer *rp; |
| llist_for_each_entry(rp, &gsmnet->a.sri->ran_peers, entry) { |
| vty_out(vty, "BSC %s %s%s", |
| osmo_sccp_inst_addr_name(gsmnet->a.sri->sccp, &rp->peer_addr), |
| osmo_fsm_inst_state_name(rp->fi), |
| VTY_NEWLINE); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| static const char *get_trans_proto_str(const struct gsm_trans *trans) |
| { |
| static char buf[256]; |
| |
| switch (trans->type) { |
| case TRANS_CC: |
| snprintf(buf, sizeof(buf), "%s %4u %4u", |
| gsm48_cc_state_name(trans->cc.state), |
| trans->cc.Tcurrent, |
| trans->cc.T308_second); |
| break; |
| case TRANS_SMS: |
| snprintf(buf, sizeof(buf), "CP:%s RP:%s", |
| gsm411_cp_state_name(trans->sms.smc_inst.cp_state), |
| gsm411_rp_state_name(trans->sms.smr_inst.rp_state)); |
| break; |
| default: |
| return NULL; |
| } |
| |
| return buf; |
| } |
| |
| /* Prefix a given format string with a given amount of spaces */ |
| #define MSC_VTY_DUMP(vty, offset, fmt, args...) \ |
| vty_out(vty, "%*s" fmt, offset, "", ##args) |
| |
| /* Print value of a named flag, prefixed with a given amount of spaces */ |
| #define MSC_VTY_DUMP_FLAG(vty, offset, name, flag) \ |
| MSC_VTY_DUMP(vty, offset + 2, "%s: %*s%s%s", \ |
| name, 30 - (int)strlen(name), "", \ |
| flag ? "true" : "false", \ |
| VTY_NEWLINE) |
| |
| enum msc_vty_dump_flags { |
| MSC_VTY_DUMP_F_SUBSCR = (1 << 0), |
| MSC_VTY_DUMP_F_CONNECTION = (1 << 1), |
| MSC_VTY_DUMP_F_TRANSACTION = (1 << 2), |
| }; |
| |
| static void vty_dump_one_trans(struct vty *vty, const struct gsm_trans *trans, |
| int offset, uint8_t dump_flags) |
| { |
| const char *proto_str; |
| |
| if (dump_flags & MSC_VTY_DUMP_F_SUBSCR) { |
| MSC_VTY_DUMP(vty, offset, "Subscriber: %s%s", |
| vlr_subscr_name(msc_a_vsub(trans->msc_a)), |
| VTY_NEWLINE); |
| } |
| |
| if (dump_flags & MSC_VTY_DUMP_F_CONNECTION) { |
| /* (If msc_a exists, there *must* be a non-null msc_a->c.msub) */ |
| MSC_VTY_DUMP(vty, offset, "RAN connection: %s%s", |
| trans->msc_a ? msub_ran_conn_name(trans->msc_a->c.msub) |
| : "(not established)", |
| VTY_NEWLINE); |
| } |
| |
| MSC_VTY_DUMP(vty, offset, "Unique (global) identifier: 0x%08x%s", |
| trans->callref, VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset, "GSM 04.07 identifier (%s): %u%s", |
| (trans->transaction_id & 0x08) ? "MO" : "MT", |
| trans->transaction_id, |
| VTY_NEWLINE); |
| |
| MSC_VTY_DUMP(vty, offset, "Type: %s%s", |
| trans_type_name(trans->type), |
| VTY_NEWLINE); |
| |
| if ((proto_str = get_trans_proto_str(trans))) { |
| MSC_VTY_DUMP(vty, offset, "Protocol specific: %s%s", |
| proto_str, VTY_NEWLINE); |
| } |
| } |
| |
| static void vty_dump_one_conn(struct vty *vty, const struct msub *msub, |
| int offset, uint8_t dump_flags) |
| { |
| struct vlr_subscr *vsub = msub_vsub(msub); |
| struct msc_a *msc_a = msub_msc_a(msub); |
| char buf[128]; |
| |
| if (dump_flags & MSC_VTY_DUMP_F_SUBSCR) { |
| dump_flags = dump_flags &~ MSC_VTY_DUMP_F_SUBSCR; |
| MSC_VTY_DUMP(vty, offset, "Subscriber: %s%s", |
| vlr_subscr_name(vsub), |
| VTY_NEWLINE); |
| } |
| |
| MSC_VTY_DUMP(vty, offset, "RAN connection: %s%s", |
| msub_ran_conn_name(msub), |
| VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset, "RAN connection state: %s%s", |
| osmo_fsm_inst_state_name(msc_a->c.fi), |
| VTY_NEWLINE); |
| |
| if (vsub) { |
| MSC_VTY_DUMP(vty, offset, "LAC / cell ID: %u / %u%s", |
| msc_a->via_cell.lai.lac, msc_a->via_cell.cell_identity, |
| VTY_NEWLINE); |
| } |
| |
| MSC_VTY_DUMP(vty, offset, "Use count total: %d%s", |
| osmo_use_count_total(&msc_a->use_count), |
| VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset, "Use count: %s%s", |
| osmo_use_count_name_buf(buf, sizeof(buf), &msc_a->use_count), |
| VTY_NEWLINE); |
| |
| /* Transactions of this connection */ |
| if (dump_flags & MSC_VTY_DUMP_F_TRANSACTION) { |
| struct gsm_trans *trans; |
| unsigned int i = 0; |
| |
| /* Both subscriber and connection info is already printed */ |
| dump_flags = dump_flags &~ MSC_VTY_DUMP_F_CONNECTION; |
| dump_flags = dump_flags &~ MSC_VTY_DUMP_F_SUBSCR; |
| |
| llist_for_each_entry(trans, &gsmnet->trans_list, entry) { |
| if (trans->msc_a != msc_a) |
| continue; |
| MSC_VTY_DUMP(vty, offset, "Transaction #%02u: %s", |
| i++, VTY_NEWLINE); |
| vty_dump_one_trans(vty, trans, offset + 2, dump_flags); |
| } |
| } |
| } |
| |
| static void vty_dump_one_subscr(struct vty *vty, struct vlr_subscr *vsub, |
| int offset, uint8_t dump_flags) |
| { |
| struct timespec now; |
| char buf[128]; |
| |
| if (vsub->name[0] != '\0') { |
| MSC_VTY_DUMP(vty, offset, "Name: '%s'%s", |
| vsub->name, VTY_NEWLINE); |
| } |
| if (vsub->msisdn[0] != '\0') { |
| MSC_VTY_DUMP(vty, offset, "MSISDN: %s%s", |
| vsub->msisdn, VTY_NEWLINE); |
| } |
| |
| MSC_VTY_DUMP(vty, offset, "LAC / cell ID: %u / %u%s", |
| vsub->cgi.lai.lac, vsub->cgi.cell_identity, |
| VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset, "RAN type: %s%s", |
| osmo_rat_type_name(vsub->cs.attached_via_ran), |
| VTY_NEWLINE); |
| |
| MSC_VTY_DUMP(vty, offset, "IMSI: %s%s", |
| vsub->imsi, VTY_NEWLINE); |
| if (vsub->tmsi != GSM_RESERVED_TMSI) { |
| MSC_VTY_DUMP(vty, offset, "TMSI: %08X%s", |
| vsub->tmsi, VTY_NEWLINE); |
| } |
| if (vsub->tmsi_new != GSM_RESERVED_TMSI) { |
| MSC_VTY_DUMP(vty, offset, "New TMSI: %08X%s", |
| vsub->tmsi_new, VTY_NEWLINE); |
| } |
| if (vsub->imei[0] != '\0') { |
| MSC_VTY_DUMP(vty, offset, "IMEI: %s%s", |
| vsub->imei, VTY_NEWLINE); |
| } |
| if (vsub->imeisv[0] != '\0') { |
| MSC_VTY_DUMP(vty, offset, "IMEISV: %s%s", |
| vsub->imeisv, VTY_NEWLINE); |
| } |
| |
| MSC_VTY_DUMP(vty, offset, "Flags: %s", VTY_NEWLINE); |
| MSC_VTY_DUMP_FLAG(vty, offset, "IMSI detached", |
| vsub->imsi_detached_flag); |
| MSC_VTY_DUMP_FLAG(vty, offset, "Conf. by radio contact", |
| vsub->conf_by_radio_contact_ind); |
| MSC_VTY_DUMP_FLAG(vty, offset, "Subscr. data conf. by HLR", |
| vsub->sub_dataconf_by_hlr_ind); |
| MSC_VTY_DUMP_FLAG(vty, offset, "Location conf. in HLR", |
| vsub->loc_conf_in_hlr_ind); |
| MSC_VTY_DUMP_FLAG(vty, offset, "Subscriber dormant", |
| vsub->dormant_ind); |
| MSC_VTY_DUMP_FLAG(vty, offset, "Received cancel location", |
| vsub->cancel_loc_rx); |
| MSC_VTY_DUMP_FLAG(vty, offset, "MS not reachable", |
| vsub->ms_not_reachable_flag); |
| MSC_VTY_DUMP_FLAG(vty, offset, "LA allowed", |
| vsub->la_allowed); |
| |
| if (vsub->last_tuple) { |
| struct vlr_auth_tuple *t = vsub->last_tuple; |
| MSC_VTY_DUMP(vty, offset, "A3A8 last tuple (used %d times): %s", |
| t->use_count, VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset + 2, "seq # : %d%s", |
| t->key_seq, VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset + 2, "RAND : %s%s", |
| osmo_hexdump(t->vec.rand, sizeof(t->vec.rand)), |
| VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset + 2, "SRES : %s%s", |
| osmo_hexdump(t->vec.sres, sizeof(t->vec.sres)), |
| VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset + 2, "Kc : %s%s", |
| osmo_hexdump(t->vec.kc, sizeof(t->vec.kc)), |
| VTY_NEWLINE); |
| } |
| |
| if (!vlr_timer(vsub->vlr, 3212)) { |
| MSC_VTY_DUMP(vty, offset, "Expires: never (T3212 is disabled)%s", |
| VTY_NEWLINE); |
| } else if (vsub->expire_lu == VLR_SUBSCRIBER_NO_EXPIRATION) { |
| MSC_VTY_DUMP(vty, offset, "Expires: never%s", |
| VTY_NEWLINE); |
| } else if (osmo_clock_gettime(CLOCK_MONOTONIC, &now) == 0) { |
| MSC_VTY_DUMP(vty, offset, "Expires: in %ld min %ld sec%s", |
| (vsub->expire_lu - now.tv_sec) / 60, |
| (vsub->expire_lu - now.tv_sec) % 60, |
| VTY_NEWLINE); |
| } |
| |
| MSC_VTY_DUMP(vty, offset, "Paging: %s paging for %d requests%s", |
| vsub->cs.is_paging ? "is" : "not", |
| llist_count(&vsub->cs.requests), |
| VTY_NEWLINE); |
| |
| /* SGs related */ |
| MSC_VTY_DUMP(vty, offset, "SGs-state: %s%s", |
| osmo_fsm_inst_state_name(vsub->sgs_fsm), |
| VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset, "SGs-MME: %s%s", |
| vsub->sgs.mme_name[0] != '\0' ? vsub->sgs.mme_name : "(none)", |
| VTY_NEWLINE); |
| |
| MSC_VTY_DUMP(vty, offset, "Use count total: %d%s", |
| osmo_use_count_total(&vsub->use_count), |
| VTY_NEWLINE); |
| MSC_VTY_DUMP(vty, offset, "Use count: %s%s", |
| osmo_use_count_name_buf(buf, sizeof(buf), &vsub->use_count), |
| VTY_NEWLINE); |
| |
| /* Connection(s) and/or transactions of this subscriber */ |
| if (dump_flags & MSC_VTY_DUMP_F_CONNECTION) { |
| struct msub *msub = msub_for_vsub(vsub); |
| if (!msub) |
| return; |
| |
| /* Subscriber info is already printed */ |
| dump_flags = dump_flags &~ MSC_VTY_DUMP_F_SUBSCR; |
| |
| MSC_VTY_DUMP(vty, offset, "Connection: %s", VTY_NEWLINE); |
| vty_dump_one_conn(vty, msub, offset + 2, dump_flags); |
| } else if (dump_flags & MSC_VTY_DUMP_F_TRANSACTION) { |
| struct gsm_trans *trans; |
| unsigned int i = 0; |
| |
| /* Subscriber info is already printed */ |
| dump_flags = dump_flags &~ MSC_VTY_DUMP_F_SUBSCR; |
| /* Do not print connection info, but mention it */ |
| dump_flags |= MSC_VTY_DUMP_F_CONNECTION; |
| |
| llist_for_each_entry(trans, &gsmnet->trans_list, entry) { |
| if (trans->vsub != vsub) |
| continue; |
| MSC_VTY_DUMP(vty, offset, "Transaction #%02u: %s", |
| i++, VTY_NEWLINE); |
| vty_dump_one_trans(vty, trans, offset + 2, dump_flags); |
| } |
| } |
| } |
| |
| DEFUN(show_msc_transaction, show_msc_transaction_cmd, |
| "show transaction", |
| SHOW_STR "Transactions\n") |
| { |
| struct gsm_trans *trans; |
| uint8_t flags = 0x00; |
| unsigned int i = 0; |
| |
| flags |= MSC_VTY_DUMP_F_CONNECTION; |
| flags |= MSC_VTY_DUMP_F_SUBSCR; |
| |
| llist_for_each_entry(trans, &gsmnet->trans_list, entry) { |
| vty_out(vty, " Transaction #%02u: %s", i++, VTY_NEWLINE); |
| vty_dump_one_trans(vty, trans, 4, flags); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(show_msc_conn, show_msc_conn_cmd, |
| "show connection [trans]", |
| SHOW_STR "Subscriber Connections\n" |
| "Show child transactions of each connection\n") |
| { |
| uint8_t flags = 0x00; |
| unsigned int i = 0; |
| struct msub *msub; |
| |
| if (argc > 0) |
| flags |= MSC_VTY_DUMP_F_TRANSACTION; |
| flags |= MSC_VTY_DUMP_F_SUBSCR; |
| |
| llist_for_each_entry(msub, &msub_list, entry) { |
| vty_out(vty, " Connection #%02u: %s", i++, VTY_NEWLINE); |
| vty_dump_one_conn(vty, msub, 4, flags); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| #define SUBSCR_FLAGS "[(conn|trans|conn+trans)]" |
| #define SUBSCR_FLAGS_HELP \ |
| "Show child connections\n" \ |
| "Show child transactions\n" \ |
| "Show child connections and transactions\n" |
| |
| /* Subscriber */ |
| DEFUN(show_subscr_cache, show_subscr_cache_cmd, |
| "show subscriber cache " SUBSCR_FLAGS, |
| SHOW_STR "Show information about subscribers\n" |
| "Display contents of subscriber cache\n" |
| SUBSCR_FLAGS_HELP) |
| { |
| struct vlr_subscr *vsub; |
| unsigned int count = 0; |
| uint8_t flags = 0x00; |
| unsigned int i = 0; |
| |
| if (argc && strcmp(argv[0], "conn") == 0) |
| flags |= MSC_VTY_DUMP_F_CONNECTION; |
| else if (argc && strcmp(argv[0], "trans") == 0) |
| flags |= MSC_VTY_DUMP_F_TRANSACTION; |
| else if (argc && strcmp(argv[0], "conn+trans") == 0) |
| flags |= MSC_VTY_DUMP_F_CONNECTION | MSC_VTY_DUMP_F_TRANSACTION; |
| |
| llist_for_each_entry(vsub, &gsmnet->vlr->subscribers, list) { |
| if (++count > 100) { |
| vty_out(vty, "%% More than %d subscribers in cache," |
| " stopping here.%s", count-1, VTY_NEWLINE); |
| break; |
| } |
| vty_out(vty, " Subscriber #%02u: %s", i++, VTY_NEWLINE); |
| vty_dump_one_subscr(vty, vsub, 4, flags); |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(sms_send_pend, |
| sms_send_pend_cmd, |
| "sms send pending", |
| "SMS related commands\n" "SMS Sending related commands\n" |
| "Send all pending SMS") |
| { |
| struct gsm_sms *sms; |
| unsigned long long sms_id = 0; |
| |
| while (1) { |
| sms = db_sms_get_next_unsent(gsmnet, sms_id, UINT_MAX); |
| if (!sms) |
| break; |
| |
| if (sms->receiver) |
| gsm411_send_sms(gsmnet, sms->receiver, sms); |
| |
| sms_id = sms->id + 1; |
| } |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(sms_delete_expired, |
| sms_delete_expired_cmd, |
| "sms delete expired", |
| "SMS related commands\n" "SMS Database related commands\n" |
| "Delete all expired SMS") |
| { |
| struct gsm_sms *sms; |
| unsigned long long sms_id = 0; |
| long long num_deleted = 0; |
| |
| while (1) { |
| sms = db_sms_get_next_unsent(gsmnet, sms_id, UINT_MAX); |
| if (!sms) |
| break; |
| |
| /* Skip SMS which are currently queued for sending. */ |
| if (sms_queue_sms_is_pending(gsmnet->sms_queue, sms->id)) |
| continue; |
| |
| /* Expiration check is performed by the DB layer. */ |
| if (db_sms_delete_expired_message_by_id(sms->id) == 0) |
| num_deleted++; |
| |
| sms_id = sms->id + 1; |
| } |
| |
| if (num_deleted == 0) { |
| vty_out(vty, "No expired SMS in database%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| vty_out(vty, "Deleted %llu expired SMS from database%s", num_deleted, VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| static int _send_sms_str(struct vlr_subscr *receiver, |
| const char *sender_msisdn, |
| char *str, uint8_t tp_pid) |
| { |
| struct gsm_network *net = receiver->vlr->user_ctx; |
| struct gsm_sms *sms; |
| |
| sms = sms_from_text(receiver, sender_msisdn, 0, str); |
| if (!sms) { |
| LOGP(DLSMS, LOGL_ERROR, "Failed to allocate SMS\n"); |
| return CMD_WARNING; |
| } |
| |
| sms->protocol_id = tp_pid; |
| |
| /* store in database for the queue */ |
| if (db_sms_store(sms) != 0) { |
| LOGP(DLSMS, LOGL_ERROR, "Failed to store SMS in Database\n"); |
| sms_free(sms); |
| return CMD_WARNING; |
| } |
| LOGP(DLSMS, LOGL_DEBUG, "SMS stored in DB\n"); |
| |
| sms_free(sms); |
| sms_queue_trigger(net->sms_queue); |
| return CMD_SUCCESS; |
| } |
| |
| static struct vlr_subscr *get_vsub_by_argv(struct gsm_network *gsmnet, |
| const char *type, |
| const char *id) |
| { |
| if (!strcmp(type, "extension") || !strcmp(type, "msisdn")) |
| return vlr_subscr_find_by_msisdn(gsmnet->vlr, id, VSUB_USE_VTY); |
| else if (!strcmp(type, "imsi") || !strcmp(type, "id")) |
| return vlr_subscr_find_by_imsi(gsmnet->vlr, id, VSUB_USE_VTY); |
| else if (!strcmp(type, "tmsi")) |
| return vlr_subscr_find_by_tmsi(gsmnet->vlr, atoi(id), VSUB_USE_VTY); |
| |
| return NULL; |
| } |
| #define SUBSCR_TYPES "(msisdn|extension|imsi|tmsi|id)" |
| #define SUBSCR_HELP "Operations on a Subscriber\n" \ |
| "Identify subscriber by MSISDN (phone number)\n" \ |
| "Legacy alias for 'msisdn'\n" \ |
| "Identify subscriber by IMSI\n" \ |
| "Identify subscriber by TMSI\n" \ |
| "Legacy alias for 'imsi'\n" \ |
| "Identifier for the subscriber\n" |
| |
| DEFUN(show_subscr, show_subscr_cmd, |
| "show subscriber " SUBSCR_TYPES " ID " SUBSCR_FLAGS, |
| SHOW_STR SUBSCR_HELP SUBSCR_FLAGS_HELP) |
| { |
| struct vlr_subscr *vsub; |
| uint8_t flags = 0x00; |
| |
| vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| /* In the vty output to the user, exclude this local use count added by vlr_subscr_get() in get_vsub_by_argv(). |
| * This works, because: for get_vsub_by_argv() to succeed, there *must* have been at least one use count before |
| * this, and since this is not multi-threaded, this vlr_subscr_put() cannot possibly reach a count of 0. */ |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| |
| if (argc > 2 && strcmp(argv[2], "conn") == 0) |
| flags |= MSC_VTY_DUMP_F_CONNECTION; |
| else if (argc > 2 && strcmp(argv[2], "trans") == 0) |
| flags |= MSC_VTY_DUMP_F_TRANSACTION; |
| else if (argc > 2 && strcmp(argv[2], "conn+trans") == 0) |
| flags |= MSC_VTY_DUMP_F_CONNECTION | MSC_VTY_DUMP_F_TRANSACTION; |
| |
| vty_out(vty, " Subscriber: %s", VTY_NEWLINE); |
| vty_dump_one_subscr(vty, vsub, 4, flags); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN_DEPRECATED(subscriber_create, subscriber_create_cmd, |
| "subscriber create imsi ID", |
| "Operations on a Subscriber\n" |
| "Create new subscriber\n" |
| "Identify the subscriber by his IMSI\n" |
| "Identifier for the subscriber\n") |
| { |
| vty_out(vty, "%% 'subscriber create' now needs to be done at osmo-hlr%s", |
| VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| DEFUN(subscriber_send_pending_sms, |
| subscriber_send_pending_sms_cmd, |
| "subscriber " SUBSCR_TYPES " ID sms pending-send", |
| SUBSCR_HELP "SMS Operations\n" "Send pending SMS\n") |
| { |
| struct vlr_subscr *vsub; |
| struct gsm_sms *sms; |
| |
| vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| sms = db_sms_get_unsent_for_subscr(vsub, UINT_MAX); |
| if (sms) |
| gsm411_send_sms(gsmnet, sms->receiver, sms); |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(subscriber_sms_delete_all, |
| subscriber_sms_delete_all_cmd, |
| "subscriber " SUBSCR_TYPES " ID sms delete-all", |
| SUBSCR_HELP "SMS Operations\n" |
| "Delete all SMS to be delivered to this subscriber" |
| " -- WARNING: the SMS data for all unsent SMS for this subscriber" |
| " WILL BE LOST.\n") |
| { |
| struct vlr_subscr *vsub; |
| |
| vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| db_sms_delete_by_msisdn(vsub->msisdn); |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(subscriber_send_sms, |
| subscriber_send_sms_cmd, |
| "subscriber " SUBSCR_TYPES " ID sms sender " SUBSCR_TYPES " SENDER_ID send .LINE", |
| SUBSCR_HELP "SMS Operations\n" SUBSCR_HELP "Send SMS\n" "Actual SMS Text\n") |
| { |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| const char *sender_msisdn; |
| char *str; |
| int rc; |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| rc = CMD_WARNING; |
| goto err; |
| } |
| |
| if (!strcmp(argv[2], "msisdn")) |
| sender_msisdn = argv[3]; |
| else { |
| struct vlr_subscr *sender = get_vsub_by_argv(gsmnet, argv[2], argv[3]); |
| if (!sender) { |
| vty_out(vty, "%% No sender found for %s %s%s", argv[2], argv[3], VTY_NEWLINE); |
| rc = CMD_WARNING; |
| goto err; |
| } |
| sender_msisdn = sender->msisdn; |
| vlr_subscr_put(sender, VSUB_USE_VTY); |
| } |
| |
| str = argv_concat(argv, argc, 4); |
| rc = _send_sms_str(vsub, sender_msisdn, str, 0); |
| talloc_free(str); |
| |
| err: |
| if (vsub) |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| |
| return rc; |
| } |
| |
| DEFUN(subscriber_silent_sms, |
| subscriber_silent_sms_cmd, |
| |
| "subscriber " SUBSCR_TYPES " ID silent-sms sender " SUBSCR_TYPES " SENDER_ID send .LINE", |
| SUBSCR_HELP "Silent SMS Operations\n" SUBSCR_HELP "Send SMS\n" "Actual SMS Text\n") |
| { |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| const char *sender_msisdn; |
| char *str; |
| int rc; |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| rc = CMD_WARNING; |
| goto err; |
| } |
| |
| if (!strcmp(argv[2], "msisdn")) { |
| sender_msisdn = argv[3]; |
| } else { |
| struct vlr_subscr *sender = get_vsub_by_argv(gsmnet, argv[2], argv[3]); |
| if (!sender) { |
| vty_out(vty, "%% No sender found for %s %s%s", argv[2], argv[3], VTY_NEWLINE); |
| rc = CMD_WARNING; |
| goto err; |
| } |
| sender_msisdn = sender->msisdn; |
| vlr_subscr_put(sender, VSUB_USE_VTY); |
| } |
| |
| str = argv_concat(argv, argc, 4); |
| rc = _send_sms_str(vsub, sender_msisdn, str, 64); |
| talloc_free(str); |
| |
| err: |
| if (vsub) |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| |
| return rc; |
| } |
| |
| #define CHAN_TYPES "(any|tch/f|tch/h|tch/any|sdcch)" |
| #define CHAN_TYPE_HELP \ |
| "Any channel\n" \ |
| "TCH/F channel\n" \ |
| "TCH/H channel\n" \ |
| "Any TCH channel\n" \ |
| "SDCCH channel\n" |
| |
| #define CHAN_MODES "(signalling|speech-hr|speech-fr|speech-efr|speech-amr)" |
| #define CHAN_MODE_HELP \ |
| "Signalling only\n" \ |
| "Speech with HR codec\n" \ |
| "Speech with FR codec\n" \ |
| "Speech with EFR codec\n" \ |
| "Speech with AMR codec\n" |
| |
| DEFUN(subscriber_silent_call_start, |
| subscriber_silent_call_start_cmd, |
| "subscriber " SUBSCR_TYPES " ID silent-call start " CHAN_TYPES " " CHAN_MODES " [IP] [<0-65535>]", |
| SUBSCR_HELP "Silent call operation\n" "Start silent call\n" |
| CHAN_TYPE_HELP CHAN_MODE_HELP |
| "Target IP for RTP traffic (default 127.0.0.1)\n" |
| "Target port for RTP traffic (default: 4000)\n") |
| { |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| struct gsm0808_channel_type ct; |
| const char *ip; |
| uint16_t port; |
| int rc, speech; |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| memset(&ct, 0x00, sizeof(ct)); |
| |
| if (!strcmp(argv[3], "signalling")) { |
| ct.ch_indctr = GSM0808_CHAN_SIGN; |
| ct.perm_spch[0] = 0; /* Spare but required */ |
| ct.perm_spch_len = 1; |
| } else if (!strcmp(argv[3], "speech-hr")) { |
| ct.ch_indctr = GSM0808_CHAN_SPEECH; |
| ct.perm_spch[0] = GSM0808_PERM_HR1; |
| ct.perm_spch_len = 1; |
| } else if (!strcmp(argv[3], "speech-fr")) { |
| ct.ch_indctr = GSM0808_CHAN_SPEECH; |
| ct.perm_spch[0] = GSM0808_PERM_FR1; |
| ct.perm_spch_len = 1; |
| } else if (!strcmp(argv[3], "speech-efr")) { |
| ct.ch_indctr = GSM0808_CHAN_SPEECH; |
| ct.perm_spch[0] = GSM0808_PERM_FR2; |
| ct.perm_spch_len = 1; |
| } else if (!strcmp(argv[3], "speech-amr")) { |
| ct.ch_indctr = GSM0808_CHAN_SPEECH; |
| ct.perm_spch[0] = GSM0808_PERM_FR3; |
| ct.perm_spch[1] = GSM0808_PERM_HR3; |
| ct.perm_spch_len = 2; |
| } |
| |
| speech = ct.ch_indctr == GSM0808_CHAN_SPEECH; |
| |
| if (!strcmp(argv[2], "tch/f")) |
| ct.ch_rate_type = speech ? GSM0808_SPEECH_FULL_BM : GSM0808_SIGN_FULL_BM; |
| else if (!strcmp(argv[2], "tch/h")) |
| ct.ch_rate_type = speech ? GSM0808_SPEECH_HALF_LM : GSM0808_SIGN_HALF_LM; |
| else if (!strcmp(argv[2], "tch/any")) |
| ct.ch_rate_type = speech ? GSM0808_SPEECH_FULL_PREF : GSM0808_SIGN_FULL_PREF; |
| else if (!strcmp(argv[2], "sdcch")) { |
| if (speech) { |
| vty_out(vty, "Can't request speech on SDCCH%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| ct.ch_rate_type = GSM0808_SIGN_SDCCH; |
| } else |
| ct.ch_rate_type = speech ? GSM0808_SPEECH_FULL_PREF : GSM0808_SIGN_ANY; |
| |
| ip = argc >= 5 ? argv[4] : "127.0.0.1"; |
| port = argc >= 6 ? atoi(argv[5]) : 4000; |
| |
| rc = gsm_silent_call_start(vsub, &ct, ip, port, vty); |
| switch (rc) { |
| case -ENODEV: |
| vty_out(vty, "%% Subscriber not attached%s", VTY_NEWLINE); |
| break; |
| default: |
| if (rc) |
| vty_out(vty, "%% Cannot start silent call (rc=%d)%s", rc, VTY_NEWLINE); |
| else |
| vty_out(vty, "%% Silent call initiated%s", VTY_NEWLINE); |
| break; |
| } |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return rc ? CMD_WARNING : CMD_SUCCESS; |
| } |
| |
| DEFUN(subscriber_silent_call_stop, |
| subscriber_silent_call_stop_cmd, |
| "subscriber " SUBSCR_TYPES " ID silent-call stop", |
| SUBSCR_HELP "Silent call operation\n" "Stop silent call\n" |
| CHAN_TYPE_HELP) |
| { |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| int rc; |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| rc = gsm_silent_call_stop(vsub); |
| switch (rc) { |
| case -ENODEV: |
| vty_out(vty, "%% No active connection for subscriber%s", VTY_NEWLINE); |
| break; |
| case -ENOENT: |
| vty_out(vty, "%% Subscriber has no silent call active%s", |
| VTY_NEWLINE); |
| break; |
| default: |
| if (rc) |
| vty_out(vty, "%% Cannot stop silent call (rc=%d)%s", rc, VTY_NEWLINE); |
| else |
| vty_out(vty, "%% Silent call stopped%s", VTY_NEWLINE); |
| break; |
| } |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return rc ? CMD_WARNING : CMD_SUCCESS; |
| } |
| |
| DEFUN(subscriber_ussd_notify, |
| subscriber_ussd_notify_cmd, |
| "subscriber " SUBSCR_TYPES " ID ussd-notify (0|1|2) .TEXT", |
| SUBSCR_HELP "Send a USSD notify to the subscriber\n" |
| "Alerting Level 0\n" |
| "Alerting Level 1\n" |
| "Alerting Level 2\n" |
| "Text of USSD message to send\n") |
| { |
| char *text; |
| struct msc_a *msc_a; |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| int level; |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| level = atoi(argv[2]); |
| text = argv_concat(argv, argc, 3); |
| if (!text) { |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return CMD_WARNING; |
| } |
| |
| msc_a = msc_a_for_vsub(vsub, true); |
| if (!msc_a || msc_a->c.remote_to) { |
| vty_out(vty, "%% An active connection and local MSC-A role is required for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| talloc_free(text); |
| return CMD_WARNING; |
| } |
| |
| msc_send_ussd_notify(msc_a, level, text); |
| /* FIXME: since we don't allocate a transaction here, |
| * we use dummy GSM 04.07 transaction ID. */ |
| msc_send_ussd_release_complete(msc_a, 0x00); |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| talloc_free(text); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(subscriber_paging, |
| subscriber_paging_cmd, |
| "subscriber " SUBSCR_TYPES " ID paging", |
| SUBSCR_HELP "Issue an empty Paging for the subscriber (for debugging)\n") |
| { |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| struct paging_request *req; |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| req = paging_request_start(vsub, PAGING_CAUSE_CALL_CONVERSATIONAL, |
| NULL, NULL, "manual Paging from VTY"); |
| if (req) |
| vty_out(vty, "%% paging subscriber%s", VTY_NEWLINE); |
| else |
| vty_out(vty, "%% paging subscriber failed%s", VTY_NEWLINE); |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return req ? CMD_SUCCESS : CMD_WARNING; |
| } |
| |
| static int loop_by_char(uint8_t ch) |
| { |
| switch (ch) { |
| case 'a': |
| return GSM414_LOOP_A; |
| case 'b': |
| return GSM414_LOOP_B; |
| case 'c': |
| return GSM414_LOOP_C; |
| case 'd': |
| return GSM414_LOOP_D; |
| case 'e': |
| return GSM414_LOOP_E; |
| case 'f': |
| return GSM414_LOOP_F; |
| case 'i': |
| return GSM414_LOOP_I; |
| } |
| return -1; |
| } |
| |
| DEFUN(subscriber_mstest_close, |
| subscriber_mstest_close_cmd, |
| "subscriber " SUBSCR_TYPES " ID ms-test close-loop (a|b|c|d|e|f|i)", |
| SUBSCR_HELP "Send a TS 04.14 MS Test Command to subscriber\n" |
| "Close a TCH Loop inside the MS\n" |
| "Loop Type A\n" |
| "Loop Type B\n" |
| "Loop Type C\n" |
| "Loop Type D\n" |
| "Loop Type E\n" |
| "Loop Type F\n" |
| "Loop Type I\n") |
| { |
| struct msc_a *msc_a; |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| const char *loop_str; |
| int loop_mode; |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| loop_str = argv[2]; |
| loop_mode = loop_by_char(loop_str[0]); |
| |
| msc_a = msc_a_for_vsub(vsub, true); |
| if (!msc_a) { |
| vty_out(vty, "%% An active connection is required for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return CMD_WARNING; |
| } |
| |
| gsm0414_tx_close_tch_loop_cmd(msc_a, loop_mode); |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(subscriber_mstest_open, |
| subscriber_mstest_open_cmd, |
| "subscriber " SUBSCR_TYPES " ID ms-test open-loop", |
| SUBSCR_HELP "Send a TS 04.14 MS Test Command to subscriber\n" |
| "Open a TCH Loop inside the MS\n") |
| { |
| struct msc_a *msc_a; |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], argv[1]); |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| msc_a = msc_a_for_vsub(vsub, true); |
| if (!msc_a) { |
| vty_out(vty, "%% An active connection is required for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return CMD_WARNING; |
| } |
| |
| gsm0414_tx_open_loop_cmd(msc_a); |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(ena_subscr_expire, |
| ena_subscr_expire_cmd, |
| "subscriber " SUBSCR_TYPES " ID expire", |
| SUBSCR_HELP "Expire the subscriber Now\n") |
| { |
| struct vlr_subscr *vsub = get_vsub_by_argv(gsmnet, argv[0], |
| argv[1]); |
| |
| if (!vsub) { |
| vty_out(vty, "%% No subscriber found for %s %s%s", |
| argv[0], argv[1], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| if (vlr_subscr_expire(vsub)) |
| vty_out(vty, "%% VLR released subscriber %s%s", |
| vlr_subscr_name(vsub), VTY_NEWLINE); |
| |
| if (osmo_use_count_total(&vsub->use_count) > 1) |
| vty_out(vty, "%% Subscriber %s is still in use," |
| " should be released soon%s", |
| vlr_subscr_name(vsub), VTY_NEWLINE); |
| |
| vlr_subscr_put(vsub, VSUB_USE_VTY); |
| return CMD_SUCCESS; |
| } |
| |
| static int scall_cbfn(unsigned int subsys, unsigned int signal, |
| void *handler_data, void *signal_data) |
| { |
| struct scall_signal_data *sigdata = signal_data; |
| struct vty *vty = sigdata->vty; |
| |
| if (!vty_is_active(vty)) |
| return 0; |
| |
| switch (signal) { |
| case S_SCALL_SUCCESS: |
| vty_out(vty, "%% Silent call success%s", VTY_NEWLINE); |
| break; |
| case S_SCALL_FAILED: |
| vty_out(vty, "%% Silent call failed%s", VTY_NEWLINE); |
| break; |
| case S_SCALL_DETACHED: |
| vty_out(vty, "%% Silent call ended%s", VTY_NEWLINE); |
| break; |
| } |
| return 0; |
| } |
| |
| DEFUN(show_stats, |
| show_stats_cmd, |
| "show statistics", |
| SHOW_STR "Display network statistics\n") |
| { |
| vty_out(vty, "Location Update : %" PRIu64 " attach, %" PRIu64 " normal, %" PRIu64 " periodic%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_LOC_UPDATE_TYPE_ATTACH)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_LOC_UPDATE_TYPE_NORMAL)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_LOC_UPDATE_TYPE_PERIODIC)->current, |
| VTY_NEWLINE); |
| vty_out(vty, "IMSI Detach Indications : %" PRIu64 "%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_LOC_UPDATE_TYPE_DETACH)->current, |
| VTY_NEWLINE); |
| vty_out(vty, "Location Updating Results: %" PRIu64 " completed, %" PRIu64 " failed%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_LOC_UPDATE_COMPLETED)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_LOC_UPDATE_FAILED)->current, |
| VTY_NEWLINE); |
| vty_out(vty, "SMS MO : %" PRIu64 " submitted, %" PRIu64 " no receiver%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_SMS_SUBMITTED)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_SMS_NO_RECEIVER)->current, |
| VTY_NEWLINE); |
| vty_out(vty, "SMS MT : %" PRIu64 " delivered, %" PRIu64 " no memory, %" PRIu64 " other error%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_SMS_DELIVERED)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_SMS_RP_ERR_MEM)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_SMS_RP_ERR_OTHER)->current, |
| VTY_NEWLINE); |
| vty_out(vty, "MO Calls : %" PRIu64 " setup, %" PRIu64 " connect ack%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_CALL_MO_SETUP)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_CALL_MO_CONNECT_ACK)->current, |
| VTY_NEWLINE); |
| vty_out(vty, "MT Calls : %" PRIu64 " setup, %" PRIu64 " connect%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_CALL_MT_SETUP)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_CALL_MT_CONNECT)->current, |
| VTY_NEWLINE); |
| vty_out(vty, "MO NC SS/USSD : %" PRIu64 " requests, %" PRIu64 " established, %" PRIu64 " rejected%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_NC_SS_MO_REQUESTS)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_NC_SS_MO_ESTABLISHED)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_NC_SS_MO_REQUESTS)->current |
| - rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_NC_SS_MO_ESTABLISHED)->current, |
| VTY_NEWLINE); |
| vty_out(vty, "MT NC SS/USSD : %" PRIu64 " requests, %" PRIu64 " established, %" PRIu64 " rejected%s", |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_NC_SS_MT_REQUESTS)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_NC_SS_MT_ESTABLISHED)->current, |
| rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_NC_SS_MT_REQUESTS)->current |
| - rate_ctr_group_get_ctr(gsmnet->msc_ctrs, MSC_CTR_NC_SS_MT_ESTABLISHED)->current, |
| VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(show_smsqueue, |
| show_smsqueue_cmd, |
| "show sms-queue", |
| SHOW_STR "Display SMSqueue statistics\n") |
| { |
| sms_queue_stats(gsmnet->sms_queue, vty); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(smsqueue_trigger, |
| smsqueue_trigger_cmd, |
| "sms-queue trigger", |
| "SMS Queue\n" "Trigger sending messages\n") |
| { |
| sms_queue_trigger(gsmnet->sms_queue); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(smsqueue_max, |
| smsqueue_max_cmd, |
| "sms-queue max-pending <1-500>", |
| "SMS Queue\n" "SMS to deliver in parallel\n" "Amount\n") |
| { |
| sms_queue_set_max_pending(gsmnet->sms_queue, atoi(argv[0])); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(smsqueue_clear, |
| smsqueue_clear_cmd, |
| "sms-queue clear", |
| "SMS Queue\n" "Clear the queue of pending SMS\n") |
| { |
| sms_queue_clear(gsmnet->sms_queue); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(smsqueue_fail, |
| smsqueue_fail_cmd, |
| "sms-queue max-failure <1-500>", |
| "SMS Queue\n" "Maximum amount of delivery failures\n" "Amount\n") |
| { |
| sms_queue_set_max_failure(gsmnet->sms_queue, atoi(argv[0])); |
| return CMD_SUCCESS; |
| } |
| |
| |
| DEFUN(cfg_mncc_int, cfg_mncc_int_cmd, |
| "mncc-int", "Configure internal MNCC handler") |
| { |
| vty->node = MNCC_INT_NODE; |
| |
| return CMD_SUCCESS; |
| } |
| |
| static struct cmd_node mncc_int_node = { |
| MNCC_INT_NODE, |
| "%s(config-mncc-int)# ", |
| 1, |
| }; |
| |
| static const struct value_string tchf_codec_names[] = { |
| { GSM48_CMODE_SPEECH_V1, "fr" }, |
| { GSM48_CMODE_SPEECH_EFR, "efr" }, |
| { GSM48_CMODE_SPEECH_AMR, "amr" }, |
| { 0, NULL } |
| }; |
| |
| static const struct value_string tchh_codec_names[] = { |
| { GSM48_CMODE_SPEECH_V1, "hr" }, |
| { GSM48_CMODE_SPEECH_AMR, "amr" }, |
| { 0, NULL } |
| }; |
| |
| static int config_write_mncc_int(struct vty *vty) |
| { |
| vty_out(vty, "mncc-int%s", VTY_NEWLINE); |
| vty_out(vty, " default-codec tch-f %s%s", |
| get_value_string(tchf_codec_names, mncc_int.def_codec[0]), |
| VTY_NEWLINE); |
| vty_out(vty, " default-codec tch-h %s%s", |
| get_value_string(tchh_codec_names, mncc_int.def_codec[1]), |
| VTY_NEWLINE); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(mnccint_def_codec_f, |
| mnccint_def_codec_f_cmd, |
| "default-codec tch-f (fr|efr|amr)", |
| "Set default codec\n" "Codec for TCH/F\n" |
| "Full-Rate\n" "Enhanced Full-Rate\n" "Adaptive Multi-Rate\n") |
| { |
| mncc_int.def_codec[0] = get_string_value(tchf_codec_names, argv[0]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(mnccint_def_codec_h, |
| mnccint_def_codec_h_cmd, |
| "default-codec tch-h (hr|amr)", |
| "Set default codec\n" "Codec for TCH/H\n" |
| "Half-Rate\n" "Adaptive Multi-Rate\n") |
| { |
| mncc_int.def_codec[1] = get_string_value(tchh_codec_names, argv[0]); |
| |
| return CMD_SUCCESS; |
| } |
| |
| |
| DEFUN(logging_fltr_imsi, |
| logging_fltr_imsi_cmd, |
| "logging filter imsi IMSI", |
| LOGGING_STR FILTER_STR |
| "Filter log messages by IMSI\n" "IMSI to be used as filter\n") |
| { |
| struct vlr_subscr *vlr_subscr; |
| struct log_target *tgt = osmo_log_vty2tgt(vty); |
| const char *imsi = argv[0]; |
| |
| if (!tgt) |
| return CMD_WARNING; |
| |
| vlr_subscr = vlr_subscr_find_by_imsi(gsmnet->vlr, imsi, VSUB_USE_VTY); |
| |
| if (!vlr_subscr) { |
| vty_out(vty, "%%no subscriber with IMSI(%s)%s", |
| argv[0], VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| log_set_filter_vlr_subscr(tgt, vlr_subscr); |
| vlr_subscr_put(vlr_subscr, VSUB_USE_VTY); |
| return CMD_SUCCESS; |
| } |
| |
| static struct cmd_node hlr_node = { |
| HLR_NODE, |
| "%s(config-hlr)# ", |
| 1, |
| }; |
| |
| DEFUN(cfg_hlr, cfg_hlr_cmd, |
| "hlr", "Configure connection to the HLR") |
| { |
| vty->node = HLR_NODE; |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_hlr_remote_ip, cfg_hlr_remote_ip_cmd, "remote-ip A.B.C.D", |
| "Remote GSUP address of the HLR\n" |
| "Remote GSUP address (default: " MSC_HLR_REMOTE_IP_DEFAULT ")") |
| { |
| talloc_free((void*)gsmnet->gsup_server_addr_str); |
| gsmnet->gsup_server_addr_str = talloc_strdup(gsmnet, argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_hlr_remote_port, cfg_hlr_remote_port_cmd, "remote-port <1-65535>", |
| "Remote GSUP port of the HLR\n" |
| "Remote GSUP port (default: " OSMO_STRINGIFY(MSC_HLR_REMOTE_PORT_DEFAULT) ")") |
| { |
| gsmnet->gsup_server_port = atoi(argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| DEFUN(cfg_hlr_ipa_name, |
| cfg_hlr_ipa_name_cmd, |
| "ipa-name NAME", |
| "Set the IPA name of this MSC\n" |
| "A unique name for this MSC. For example: PLMN + redundancy server number: MSC-901-70-0. " |
| "This name is used for GSUP routing and must be set if more than one MSC is connected to the HLR. " |
| "The default is 'MSC-00-00-00-00-00-00'.\n") |
| { |
| if (vty->type != VTY_FILE) { |
| vty_out(vty, "The IPA name cannot be changed at run-time; " |
| "It can only be set in the configuration file.%s", VTY_NEWLINE); |
| return CMD_WARNING; |
| } |
| |
| gsmnet->msc_ipa_name = talloc_strdup(gsmnet, argv[0]); |
| return CMD_SUCCESS; |
| } |
| |
| static int config_write_hlr(struct vty *vty) |
| { |
| vty_out(vty, "hlr%s", VTY_NEWLINE); |
| vty_out(vty, " remote-ip %s%s", |
| gsmnet->gsup_server_addr_str, VTY_NEWLINE); |
| vty_out(vty, " remote-port %u%s", |
| gsmnet->gsup_server_port, VTY_NEWLINE); |
| if (gsmnet->msc_ipa_name) |
| vty_out(vty, " ipa-name %s%s", gsmnet->msc_ipa_name, VTY_NEWLINE); |
| return CMD_SUCCESS; |
| } |
| |
| void msc_vty_init(struct gsm_network *msc_network) |
| { |
| OSMO_ASSERT(gsmnet == NULL); |
| gsmnet = msc_network; |
| |
| osmo_stats_vty_add_cmds(); |
| |
| install_element(CONFIG_NODE, &cfg_net_cmd); |
| install_node(&net_node, config_write_net); |
| install_element(GSMNET_NODE, &cfg_net_ncc_cmd); |
| install_element(GSMNET_NODE, &cfg_net_mnc_cmd); |
| install_element(GSMNET_NODE, &cfg_net_name_short_cmd); |
| install_element(GSMNET_NODE, &cfg_net_name_long_cmd); |
| install_element(GSMNET_NODE, &cfg_net_encryption_cmd); |
| install_element(GSMNET_NODE, &cfg_net_encryption_uea_cmd); |
| install_element(GSMNET_NODE, &cfg_net_authentication_cmd); |
| install_element(GSMNET_NODE, &cfg_net_rrlp_mode_cmd); |
| install_element(GSMNET_NODE, &cfg_net_mm_info_cmd); |
| install_element(GSMNET_NODE, &cfg_net_timezone_cmd); |
| install_element(GSMNET_NODE, &cfg_net_timezone_dst_cmd); |
| install_element(GSMNET_NODE, &cfg_net_no_timezone_cmd); |
| install_element(GSMNET_NODE, &cfg_net_per_loc_upd_cmd); |
| install_element(GSMNET_NODE, &cfg_net_no_per_loc_upd_cmd); |
| install_element(GSMNET_NODE, &cfg_net_call_wait_cmd); |
| install_element(GSMNET_NODE, &cfg_net_no_call_wait_cmd); |
| |
| install_element(CONFIG_NODE, &cfg_msc_cmd); |
| install_node(&msc_node, config_write_msc); |
| install_element(MSC_NODE, &cfg_sms_database_cmd); |
| install_element(MSC_NODE, &cfg_msc_assign_tmsi_cmd); |
| install_element(MSC_NODE, &cfg_msc_lcls_disable_cmd); |
| install_element(MSC_NODE, &cfg_msc_no_lcls_disable_cmd); |
| install_element(MSC_NODE, &cfg_msc_mncc_internal_cmd); |
| install_element(MSC_NODE, &cfg_msc_mncc_external_cmd); |
| install_element(MSC_NODE, &cfg_msc_mncc_guard_timeout_cmd); |
| install_element(MSC_NODE, &cfg_msc_deprecated_mncc_guard_timeout_cmd); |
| install_element(MSC_NODE, &cfg_msc_ncss_guard_timeout_cmd); |
| install_element(MSC_NODE, &cfg_msc_no_assign_tmsi_cmd); |
| install_element(MSC_NODE, &cfg_msc_auth_tuple_max_reuse_count_cmd); |
| install_element(MSC_NODE, &cfg_msc_auth_tuple_reuse_on_error_cmd); |
| install_element(MSC_NODE, &cfg_msc_check_imei_rqd_cmd); |
| install_element(MSC_NODE, &cfg_msc_cs7_instance_a_cmd); |
| install_element(MSC_NODE, &cfg_msc_cs7_instance_iu_cmd); |
| install_element(MSC_NODE, &cfg_msc_paging_response_timer_cmd); |
| install_element(MSC_NODE, &cfg_msc_emergency_msisdn_cmd); |
| install_element(MSC_NODE, &cfg_msc_sms_over_gsup_cmd); |
| install_element(MSC_NODE, &cfg_msc_no_sms_over_gsup_cmd); |
| install_element(MSC_NODE, &cfg_msc_osmux_cmd); |
| install_element(MSC_NODE, &cfg_msc_handover_number_range_cmd); |
| install_element(MSC_NODE, &cfg_msc_nri_bitlen_cmd); |
| install_element(MSC_NODE, &cfg_msc_nri_add_cmd); |
| install_element(MSC_NODE, &cfg_msc_nri_del_cmd); |
| |
| neighbor_ident_vty_init(msc_network); |
| |
| /* Timer configuration commands (generic osmo_tdef API) */ |
| osmo_tdef_vty_groups_init(MSC_NODE, msc_tdef_group); |
| |
| mgcp_client_vty_init(msc_network, MSC_NODE, &msc_network->mgw.conf); |
| #ifdef BUILD_IU |
| ranap_iu_vty_init(MSC_NODE, (enum ranap_nsap_addr_enc*)&msc_network->iu.rab_assign_addr_enc); |
| #endif |
| sgs_vty_init(); |
| |
| osmo_fsm_vty_add_cmds(); |
| |
| osmo_signal_register_handler(SS_SCALL, scall_cbfn, NULL); |
| |
| install_element_ve(&show_subscr_cmd); |
| install_element_ve(&show_subscr_cache_cmd); |
| install_element_ve(&show_bsc_cmd); |
| install_element_ve(&show_msc_conn_cmd); |
| install_element_ve(&show_msc_transaction_cmd); |
| install_element_ve(&show_nri_cmd); |
| |
| install_element_ve(&sms_send_pend_cmd); |
| install_element_ve(&sms_delete_expired_cmd); |
| |
| install_element_ve(&subscriber_create_cmd); |
| install_element_ve(&subscriber_send_sms_cmd); |
| install_element_ve(&subscriber_silent_sms_cmd); |
| install_element_ve(&subscriber_silent_call_start_cmd); |
| install_element_ve(&subscriber_silent_call_stop_cmd); |
| install_element_ve(&subscriber_ussd_notify_cmd); |
| install_element_ve(&subscriber_mstest_close_cmd); |
| install_element_ve(&subscriber_mstest_open_cmd); |
| install_element_ve(&subscriber_paging_cmd); |
| install_element_ve(&show_stats_cmd); |
| install_element_ve(&show_smsqueue_cmd); |
| install_element_ve(&logging_fltr_imsi_cmd); |
| |
| install_element(ENABLE_NODE, &ena_subscr_expire_cmd); |
| install_element(ENABLE_NODE, &smsqueue_trigger_cmd); |
| install_element(ENABLE_NODE, &smsqueue_max_cmd); |
| install_element(ENABLE_NODE, &smsqueue_clear_cmd); |
| install_element(ENABLE_NODE, &smsqueue_fail_cmd); |
| install_element(ENABLE_NODE, &subscriber_send_pending_sms_cmd); |
| install_element(ENABLE_NODE, &subscriber_sms_delete_all_cmd); |
| |
| install_element(CONFIG_NODE, &cfg_mncc_int_cmd); |
| install_node(&mncc_int_node, config_write_mncc_int); |
| install_element(MNCC_INT_NODE, &mnccint_def_codec_f_cmd); |
| install_element(MNCC_INT_NODE, &mnccint_def_codec_h_cmd); |
| |
| install_element(CFG_LOG_NODE, &logging_fltr_imsi_cmd); |
| |
| install_element(CONFIG_NODE, &cfg_hlr_cmd); |
| install_node(&hlr_node, config_write_hlr); |
| install_element(HLR_NODE, &cfg_hlr_remote_ip_cmd); |
| install_element(HLR_NODE, &cfg_hlr_remote_port_cmd); |
| install_element(HLR_NODE, &cfg_hlr_ipa_name_cmd); |
| } |