Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
simtrace2
/
f721e69bc1d2adc7228b479a5ebec617469933ff
/
firmware
/
libboard
« Previous
b52b886
[firmware] card_pres: Use 0/1 index number instead of 1/2
by Harald Welte
· 7 years ago
c47fc5f
set local slot LED according to remote/local state.
by Harald Welte
· 7 years ago
02d0ec6
uart_console: Re-start watchdog during busy-waiting for serial chars
by Harald Welte
· 7 years ago
2539917
dfu: make sure to not bloat the loader with main board init stuff.
by Harald Welte
· 7 years ago
0709d2d
perst/sim_switch: Log events using TRACE_INFO
by Harald Welte
· 7 years ago
44622df
consistently use 0-based counting of modems/slots
by Harald Welte
· 7 years ago
5c583d3
Generalize SIM switching code and allow local/remote switching via USB
by Harald Welte
· 7 years ago
114e74d
wwan_perst: Warn if somebody failed to initialize us
by Harald Welte
· 7 years ago
cb093ce
wwan_perst: Support varying timeout and permanent active/inactive
by Harald Welte
· 7 years ago
ed1efc5
qmod: debug_cmd: Avoid 'Unknown command' for valid commands
by Harald Welte
· 7 years ago
2817498
qmod: Initialize ST12 specific I/O pins only on ST12
by Harald Welte
· 7 years ago
8e7fca3
migrate from req_ctx to msgb
by Harald Welte
· 7 years ago
6d1128e
QMOD: Add code to determine SIM Card presence
by Harald Welte
· 7 years ago
7e4390f
qmod: wwan_led.c: Fix handling of LED for second Modem
by Harald Welte
· 7 years ago
9164a6d
qmod: Disable various console commands on ST34
by Harald Welte
· 7 years ago
2cbc9b2
use same USB Product ID for DFU and runtime mode
by Harald Welte
· 7 years ago
353330d
qmod: Fix polarity of SPDT switch
by Harald Welte
· 8 years ago
abba8a8
LED: Introduce LED blinking pattern code
by Harald Welte
· 8 years ago
912b183
qmod: Use different Interface Strings for Modem1+2 / Modem 3+4
by Harald Welte
· 8 years ago
809e584
qmod: Add code to switch between physical and virtual SIM
by Harald Welte
· 8 years ago
705e899
qmod: (re)activate USB port remapping.
by Harald Welte
· 8 years ago
0e29598
qmod: Replace hand-crafted delay loop with call to mdelay()
by Harald Welte
· 8 years ago
c6e482d
qmod eeprom/i2c: Re-start watchdog while slow bit-banging
by Harald Welte
· 8 years ago
1405100
DFU: Introduce board/app-specific override for booting in DFU mode
by Harald Welte
· 8 years ago
aaba4af
Use Supply Controller to avoid running SAM3 on voltages lower than 3.0V
by Harald Welte
· 8 years ago
3ecbf67
only simtrace is bus-powered, SAM3 on qmod + owhw are self-powered
by Harald Welte
· 8 years ago
f415d71
Call USBD_Disconnect before software-triggered CPU reset
by Harald Welte
· 8 years ago
ec0837c
change from \r\n (CRLF) to \n\r (LFCR)
by Harald Welte
· 8 years ago
91fc402
DFU: make sure to properly initialize g_dfu pointer before using it
by Harald Welte
· 8 years ago
d1e9634
DFU: fix transitions between runtime and DFU mode
by Harald Welte
· 8 years ago
db17e83
cstartup: (re-)enable interrupts before calling main()
by Harald Welte
· 8 years ago
0af4948
cstartup / USBD: Use correct Makefile conditionals for DFU
by Harald Welte
· 8 years ago
cab6641
flashd: Set 6 Wait states as per Errata requiremens for Revision A
by Harald Welte
· 8 years ago
0395bd1
move PLLB (for USB) initialization to board_lowlevel.c
by Harald Welte
· 8 years ago
adba0ce
fix g_dfu access from both DFU and runtime access
by Harald Welte
· 8 years ago
65cca7c
ensure g_dfu is linked to start of RAM when building DFU loader
by Harald Welte
· 8 years ago
32852bc
DFU: towards a more complete implementation
by Harald Welte
· 8 years ago
d09829d
Remove newlib dependency, include own stdio/string/assert
by Harald Welte
· 8 years ago
d8a003d
Structure build system to build for multiple boards/apps/environments
by Harald Welte
· 8 years ago
3f5e3dd
Change directory structure to align with Atmel softpack
by Harald Welte
· 8 years ago