Gitiles
Code Review Sign In
gerrit.osmocom.org / simtrace2 / e3b2de45c4507754a29f1c74865150b34c5d5f23 / firmware / libcommon
  1. e3b2de4 firmware: move printing of welcome banner to common function print_banner() by Harald Welte · 4 years, 9 months ago
  2. b566ea3 OSMO_ASSERT() on double-free or invalid pointer by Harald Welte · 4 years, 9 months ago
  3. bfd27af firmware: Reformat value_string to pass our validation scripts by Harald Welte · 4 years, 9 months ago
  4. e213cc4 cardem: Implement support for CEMU_FEAT_F_STATUS_IRQ by Harald Welte · 4 years, 9 months ago
  5. a5bbe78 cardem: Add SIMTRACE_MSGT_BD_CEMU_CONFIG by Harald Welte · 4 years, 9 months ago
  6. 140f007 cardem: Make card_emu_report_status() optionally use IRQ endpoint by Harald Welte · 4 years, 9 months ago
  7. 12c9b7b card_emu: Remove extraneous initialization of ch->pts.state by Harald Welte · 4 years, 9 months ago
  8. 4d4405f card_emu: Remove extraneous code by Harald Welte · 4 years, 9 months ago
  9. 6a3a714 card_emu: Always print state names in string representation by Harald Welte · 4 years, 9 months ago
  10. e9f429d card_emu: Avoid recursive calls to card_set_state() by Harald Welte · 4 years, 9 months ago
  11. 02d0d73 card_emu: Initialize PTSS state every time we start PTS by Harald Welte · 4 years, 9 months ago
  12. 5b13602 host_communication: Send zero-length-packet on wMaxPacketSize by Harald Welte · 4 years, 9 months ago
  13. 81f4ef7 cardem: RST resets all state (including release of buffers) by Harald Welte · 4 years, 9 months ago
  14. fa197ca cardem: Move card_emu_io_statechg() calls out of interrupt context by Harald Welte · 4 years, 9 months ago
  15. e92cb50 card_emu: Factor out card_handle_reset() from card_emu_init() by Harald Welte · 4 years, 9 months ago
  16. 1714679 pseudo_talloc: Increment number of buffers from 10 to 20 by Harald Welte · 4 years, 9 months ago
  17. a812de8 usb_buf: Properly initialize buffered_endpoint->ep number by Harald Welte · 4 years, 9 months ago
  18. ad11709 usb_buf: Actually limit queue to 3 elements, not 4 by Harald Welte · 4 years, 9 months ago
  19. 56be0bf cardem: Fix memory leak on unsupported SIMTRACE_MSGT_DT_CEMU_CARDINSERT by Harald Welte · 4 years, 9 months ago
  20. 63c9e1f implement minimalistic talloc_report(); add 't' command on UART by Harald Welte · 4 years, 9 months ago
  21. a14616c usb_buf: Limit the maximum queue length to 3 elements by Harald Welte · 4 years, 9 months ago
  22. f4a625b usb_buf: count number of elements in queue by Harald Welte · 4 years, 9 months ago
  23. 271be9d more comments in host_communication.c. by Harald Welte · 4 years, 9 months ago
  24. 342a7fe Add missing CR to achieve CRLF at end of log lines by Harald Welte · 4 years, 9 months ago
  25. 3c003cc Fix format string related warnings (int vs. long) by Harald Welte · 4 years, 9 months ago
  26. 37055b9 stdio: Add support for %p format string (pointer address) by Harald Welte · 4 years, 9 months ago
  27. 503e184 cardem: use simplest ATR as default ATR by Kévin Redon · 5 years ago
  28. 1cfc25e minor : fix typo in comment by Kévin Redon · 5 years ago
  29. 3864a79 minor: improve debug output by Kévin Redon · 6 years ago
  30. b7f94dc qmod: lower VCC threshold to 2.5V by Kévin Redon · 4 years, 10 months ago 0.6
  31. c90de69 free USB buffer when allocation failed by Kévin Redon · 4 years, 10 months ago
  32. ac7e73a check RST/VCC/CLK line at every step of the activation by Kévin Redon · 4 years, 10 months ago
  33. 7233cf8 initialize VCC, RST, and VCC with actual values by Kévin Redon · 4 years, 10 months ago
  34. ede87e0 USB: place version string in interface by Kévin Redon · 5 years ago
  35. 4b487b8 Fix builds on Ubuntu 16.04 by Harald Welte · 5 years ago
  36. e026546 add serial and version information in USB descriptor by Kévin Redon · 5 years ago
  37. 2fdcf3b cardem: add more debug information for TPDU state by Kévin Redon · 6 years ago
  38. c171112 stdio: fix detection of malformated format strings by Kévin Redon · 6 years ago
  39. 29200c6 stdio: add void 'l' format string qualifier by Kévin Redon · 6 years ago
  40. c394109 firmware: Enable -Wformat and resolve all related compiler warnings by Harald Welte · 6 years ago
  41. ff3d849 USB: increase USB reset time by Kévin Redon · 6 years ago
  42. 910e683 cardem (minor): trace tx data send over USB by Kévin Redon · 6 years ago
  43. 8a4fba5 cardem: add state name in trace by Kévin Redon · 6 years ago
  44. 1b39fd3 cardem (minor): remove to verbose log trace by Kévin Redon · 6 years ago
  45. 0f4abf5 cardem: minor typo fix in comment by Kévin Redon · 6 years ago
  46. 1836ac0 add synchronous UART transmission and use it in exceptions by Kévin Redon · 6 years ago
  47. dd36d9b sniff: send incomplete TPDU when reset is asserted by Kévin Redon · 6 years ago
  48. 8b8e58b cardem: use TC2 as WI and update WT after ATR by Kévin Redon · 6 years ago
  49. ebe672e cardem: use TC_ETU to trigger ATR sending by Kévin Redon · 6 years ago
  50. 2a44dc5 sniff: increase debug output by Kévin Redon · 6 years ago
  51. ec396bf sniff: fix ATR checksum calculation by Kévin Redon · 6 years ago
  52. 6971996 sniff: ensure the checksum error flag is also printed by Kévin Redon · 6 years ago
  53. 8e84f81 sniff: rename reset hold/release to assert/deassert by Kévin Redon · 6 years ago
  54. b605388 cardem: fix USB message parsing by Kévin Redon · 6 years ago
  55. 680bdab cardem: fix typo by Kévin Redon · 6 years ago
  56. f66af0c sniff: add checksum verification for ATR and PPS by Kévin Redon · 6 years ago
  57. 5f6b871 fix 'ISO_S_IN_ATR not handled' gcc warning by Kévin Redon · 6 years ago
  58. ac0843a make adc2uv common by Kévin Redon · 6 years ago
  59. f000831 sniffer: fix inverted reset meaning by Kévin Redon · 6 years ago
  60. b37bda0 sniffer: only allocate USB message if queue is not too long by Kévin Redon · 6 years ago
  61. c6b9680 sniffer: also send malformed message over USB by Kévin Redon · 6 years ago
  62. a95bb1e minor: fix linker warning by Kévin Redon · 6 years ago
  63. da5578b sniffer: set LED pattern by Kévin Redon · 6 years ago
  64. a2fccba sniffer: move reset handling from ISR to main loop by Kévin Redon · 6 years ago
  65. 411428e sniffer: move data print before USB send by Kévin Redon · 6 years ago
  66. f82f0f6 USB: add flags for sniff data and centralise transfer by Kévin Redon · 6 years ago
  67. 55f0612 cosmetic: put spaces around operations by Kévin Redon · 6 years ago
  68. 33d1eb7 replace leading spaces with tabs by Kévin Redon · 6 years ago
  69. 9a12d68 firmware: set license to GPLv2+ by Kévin Redon · 6 years ago
  70. bf6b1b1 buffer: increase buffer size to 512 to cope with fast and long TPDUs by Kévin Redon · 6 years ago
  71. 1200a52 sniffer: add waiting time WT update by King Kévin · 6 years ago
  72. fe763b7 sniffing: decrease USB IRQ prioprity to prevent USART overrun by Kévin Redon · 6 years ago
  73. c9bd715 sniffing: fix procedure byte handling and make TPDU parsing more strict by Kévin Redon · 6 years ago
  74. 35e8bdf sniffer: also send incomplete (e.g. timeout) data (PPS/ATR/TPDU) by Kévin Redon · 6 years ago
  75. 709a431 sniffing: move conversion convertion and flag processing from ISR to main loop to keep ISR fast and focus on data capture by Kévin Redon · 6 years ago
  76. 7406337 sniffer: display F and D values frim PPS by Kévin Redon · 6 years ago
  77. de97fd2 sniffer USB: implement USB communication and send parsed messages by Kévin Redon · 6 years ago
  78. 012940f USB device: add USB message structure for sniffer communication by Kévin Redon · 6 years ago
  79. a1012b1 USB: add central file to define USB IDs, classes, and endpoints by Kévin Redon · 6 years ago
  80. 42bd026 minor: fix typos in comment by Kévin Redon · 6 years ago
  81. 638cec8 sniff: add WT timeout detection using USART timeout (TC is not required) by Kévin Redon · 6 years ago
  82. 00ec89d sniff: add TPDU parsing (TPDUs become APDUs on the upper layer) by Kévin Redon · 6 years ago
  83. cf59919 sniff: print parsed ATR and PPS; use red LED to show main application is running; use green LED to indicate activity (message parsed) by Kévin Redon · 6 years ago
  84. 3113e3d update_fidi: remove debug output since this function is called in time critical ISR by Kévin Redon · 6 years ago
  85. 8fa6ff5 sniffer: use ISR to store sniffed data in buffer, add ATR and PPS parsing, and PPS related FiDi update by Kévin Redon · 6 years ago
  86. 4fe99fa ISO7816: change update_fidi to use provided USART by Kévin Redon · 6 years ago
  87. d7a6de5 sniffer: add state definitions, improve IRQ handling, update pins configuration by Kévin Redon · 6 years ago
  88. 353351d simtrace: add support for sniffing on both USART by Kévin Redon · 6 years ago
  89. ee62a9d simtrace: add dedicated power pins configuration for sniffing by Kévin Redon · 6 years ago
  90. 45ad62d sniff: use USART 0 instead of USART 1 by Kévin Redon · 6 years ago
  91. 7b73462 sniff mode: handle USART 1 RX interrupt to show sniffer data by Kévin Redon · 6 years ago
  92. 36abece enable (empty) sniffer support for SIMtrace board by Kévin Redon · 6 years ago
  93. 05cc7f6 ringbuffer: Don't print/TRAC from ringbuffer by Harald Welte · 6 years ago
  94. 9d90d28 Use system include <foo.h> notation for libosmocore headers by Harald Welte · 6 years ago
  95. a9bca48 ring buffer: increase buffer size from 128 to 256 to cope with large debug output by Kévin Redon · 6 years ago
  96. f5869d4 USB: implement USB reset by setting the on-board pull-up on D+ low by Kévin Redon · 6 years ago
  97. a93f727 fix: remove duplicate volatile declaration by Kévin Redon · 6 years ago
  98. af616ec CCID driver: Use USBD_GetDriver() instead of non-initialized state variable by Harald Welte · 7 years ago
  99. 6051e12 CCID: re-enable control request handler for CCID class requests by Harald Welte · 7 years ago
  100. 75cf93e rename ccid.c to mode_ccid.c to align with mode_cardemu.c by Harald Welte · 7 years ago