Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
simtrace2
/
65cca7cccc1a5de363b443a5218d6e75d73bff0d
« Previous
964f509
remove pio_capture, we don't use it
by Harald Welte
· 8 years ago
96e62a4
stdio.c: fix compiler warning
by Harald Welte
· 8 years ago
045ea3e
timer.h: Fix compiler warnings about redefinition
by Harald Welte
· 8 years ago
d09829d
Remove newlib dependency, include own stdio/string/assert
by Harald Welte
· 8 years ago
d525231
fix some compiler warnings
by Harald Welte
· 8 years ago
d8a003d
Structure build system to build for multiple boards/apps/environments
by Harald Welte
· 8 years ago
a1cd0f3
fix compilation of card_emu_tests
by Harald Welte
· 8 years ago
3f5e3dd
Change directory structure to align with Atmel softpack
by Harald Welte
· 8 years ago
7ed6f3b
WIP: Introduce USB DFU code from my at91lib DFU port
by Harald Welte
· 8 years ago
aa3b867
WIP: split main from board-speciic parts
by Harald Welte
· 8 years ago
a05ccc9
build efc.o and flashd.o as part of build process
by Harald Welte
· 8 years ago
e9eaf90
import efc.[ch] and flashd.[ch] from SAM3S softpack 2.1
by Harald Welte
· 8 years ago
1d91058
qmod: Inver initial state of PERST signals
by Harald Welte
· 8 years ago
4a9bce1
qmod: invert WWAN_PERST logic (we use transistors now)
by Harald Welte
· 8 years ago
6732248
Add support for board version reading via ADC
by Harald Welte
· 8 years ago
9c78cff
Extend WWAN modem PERST to 300ms
by Harald Welte
· 8 years ago
987f59a
Import libosmocore timer infrastructure and use it for PERST
by Harald Welte
· 8 years ago
b41598b
Introudce an include_libosmocore directory and move (updated) linuxlist there
by Harald Welte
· 8 years ago
7e5c7d5
Add debug commands '1' and '2' to generate 1ms reset pulses to modems
by Harald Welte
· 8 years ago
31f817c
Add support for controlling PERST of WWAN modems (on qmod)
by Harald Welte
· 8 years ago
83207e0
Add 'mdelay()' function to busy-wait for given number of milli-seconds
by Harald Welte
· 8 years ago
2819e9c
wwan_led: Read + report status changes of WWAN LED inputs
by Harald Welte
· 8 years ago
af61479
qmod: Remove 'U' debug command and directly initialize USB
by Harald Welte
· 8 years ago
fb3f308
board_lowlevel: Clean up PLLA configuration
by Harald Welte
· 8 years ago
84ad985
usb: Cofnigure PLLB according to board.h BOARD_MAINOSC
by Harald Welte
· 8 years ago
7861132
qmod: Don't violate PLL minimum output frequency
by Harald Welte
· 8 years ago
b871363
qmod: cosmetic changes to EEPROM hex array
by Harald Welte
· 8 years ago
b30783c
qmod EEPROM: Dont't mark any ports as non-removable
by Harald Welte
· 8 years ago
ae8a465
qmod: Commit missing changes to EEPROM
by Harald Welte
· 8 years ago
6dfcf70
qmod: Start with _HUB_RESET=0 -> HUB_RESET=1 (not in reset)
by Harald Welte
· 8 years ago
f9a182d
qmod: breal the command loop when 'U' is pressed and proceed to USB init
by Harald Welte
· 8 years ago
afbb747
qmod: do not automatically clear _HUB_RESET after EEPROM write
by Harald Welte
· 8 years ago
e07aed6
qmod: debug menu: Add 'U' command to proceed to USB
by Harald Welte
· 8 years ago
396354c
qmod: debug menu: make sure to always print something
by Harald Welte
· 8 years ago
006b16d
quad-modem: Add debug console commands for debugging
by Harald Welte
· 8 years ago
e974fbb
Issue ST12_PRTPWR_OVERRIDE before putting hub in reset
by Harald Welte
· 8 years ago
15e026e
qmod: Set PIN_PRTPWR_OVERRIDE to output/low
by Harald Welte
· 8 years ago
4e3b9a5
qmod: attempt to swithc the DN/DP wires of the SAM3
by Harald Welte
· 8 years ago
67415e3
HACK: Add EEPROM writing at boot of SAM3 on qmod
by Harald Welte
· 8 years ago
73d697d
i2c-bitbang: increase speed to ~110kHz
by Harald Welte
· 8 years ago
0aea9ff
Fix reading SDA in I2C bit-banging code
by Harald Welte
· 8 years ago
c6ae98c
i2c_bitbang: Change logic when to use i2c_delay()
by Harald Welte
· 8 years ago
226b40a
WIP: bit-banging I2C support for EEPROM access on QMOD
by Harald Welte
· 8 years ago
a02b641
Add support for 'qmod' (quad-modem) board
by Harald Welte
· 8 years ago
fd9c041
fix TRACE_ENTRY line termination (LF -> CRLF)
by Harald Welte
· 9 years ago
990f010
Add HardFault Exception Handler
by Harald Welte
· 9 years ago
e26c943
exceptions: Print name of exception to console
by Harald Welte
· 9 years ago
622b6be
Fix ADC based VCC detection
by Harald Welte
· 9 years ago
3bafe43
dynamically dispatch USART IRQs
by Harald Welte
· 9 years ago
dde112e
print instance/channel number in all trace messages
by Harald Welte
· 9 years ago
8ee15db
read SAM3S unique serial number at start and print it
by Harald Welte
· 9 years ago
28772eb
ADC: Make errata work-arounds depend on run-time detection of chip version
by Harald Welte
· 9 years ago
1871c25
simtrace2-remsim: Instruct SAM3S to simulate card removal on SIGINT
by Harald Welte
· 9 years ago
cf1c19a
src_simtrace/main: debug/trace logging improvements
by Harald Welte
· 9 years ago
04e37a8
firmware/main: Disable the rotor unless TRACE_DEBUG
by Harald Welte
· 9 years ago
5541e8a
USBD_HAL: Hard-code TRACE_LEVEL_WARNING
by Harald Welte
· 9 years ago
9daaa79
simtrace2-remsim: Send an ATR that allows for a 5MHz/16 divider
by Harald Welte
· 9 years ago
0.1
53079bb
debug/tracing updates
by Harald Welte
· 9 years ago
c58bba0
wait for UART Tx completion before switching baud rate at PTS
by Harald Welte
· 9 years ago
c8beefb
wait for transmitter to be done before receiving
by Harald Welte
· 9 years ago
903d63a
card_emu: Alwasys update state before enabling UART Rx/Tx
by Harald Welte
· 9 years ago
52d5546
card_emu: Avoid PTS related race-condition
by Harald Welte
· 9 years ago
ccb8a22
card_emu: Avoid PTS related race-condition
by Harald Welte
· 9 years ago
a929f21
card_emu: Differentiate between TRACE_{DEBUG/ERROR/INFO}
by Harald Welte
· 9 years ago
07872b6
VCC/ADC: finish implementing VCC detection via ADC
by Harald Welte
· 9 years ago
6dcacf3
OWHW: fix operation with second modem/UART
by Harald Welte
· 9 years ago
419eb8a
WIP: Use ADC to determine VCC voltage
by Harald Welte
· 9 years ago
ff16065
implement CEMU_USB_MSGT_DT_GET_STATUS
by Harald Welte
· 9 years ago
02d5096
add host .o and executables to .gitignore
by Harald Welte
· 9 years ago
2315e6b
ensure git version ends up in firmware image
by Harald Welte
· 9 years ago
236caf6
remote-sim host tools: Auto-discover the endpoint addresses
by Harald Welte
· 9 years ago
095ac6c
Add simtrace2-remsim applications
by Harald Welte
· 9 years ago
b26d003
split/segment multiple commands from single USB transfer
by Harald Welte
· 9 years ago
d295b92
ensure usb_msg_hdr contains raw message length
by Harald Welte
· 9 years ago
b8f9450
shrink ringbuffer size to 128 bytes
by Harald Welte
· 9 years ago
9f240b6
use irq-safe version of llist operations between USB callback and main
by Harald Welte
· 9 years ago
da15ca0
mode_cardemu: mask the USART status register with mask register
by Harald Welte
· 9 years ago
3d27c84
host_comm: Fix race condition in handling OUT USB transfers
by Harald Welte
· 9 years ago
250cd2c
host_communication: set rctx->tot_len after receiving USB transfer
by Harald Welte
· 9 years ago
372f4cc
board_lowlevel: Use LED definitions from board.h
by Harald Welte
· 9 years ago
5820ea9
dispatch_usb_command: Ensure list consistency + avoid mem leaks
by Harald Welte
· 9 years ago
0eaa992
cardem: Add support for USB host based set/clear of card_insert
by Harald Welte
· 9 years ago
7abdb51
ringbuffer: Make ring buffer access irq-save
by Harald Welte
· 9 years ago
7dd3dfd
convert all src_simtrace code to kernel coding style
by Harald Welte
· 9 years ago
1605564
ensure USB config numbers always start from 1
by Harald Welte
· 9 years ago
072dadd
main.c: Only call the configure() function of a configuration if it exists
by Harald Welte
· 9 years ago
40901a0
various printf/debug output improvements
by Harald Welte
· 9 years ago
57b3a25
Add Card-Emulation for second UART/USIM to USB descriptors
by Harald Welte
· 9 years ago
13e8202
mode_cardem: Prepare for full support of second UART/USIM
by Harald Welte
· 9 years ago
06b27f6
mode_cardemu: Implement CEMU_USB_MSGT_DT_SET_ATR
by Harald Welte
· 9 years ago
ebb80ed
introduce 'main' queue between USB receive and UART TX
by Harald Welte
· 9 years ago
ad43440
card_emu: Fix various compiler warnings by switch/default/break
by Harald Welte
· 9 years ago
5e00400
board_lowlevel.c: Improve main oscillator initialization
by Harald Welte
· 9 years ago
a0cf200
host_communication: keep track of number of pending/queued req_ctx
by Harald Welte
· 9 years ago
acd48c5
HACK: always use the USART interrupt handler of mode_cardemu()
by Harald Welte
· 9 years ago
fcdd660
card_emu: Don't de-reference a NULL variable
by Harald Welte
· 9 years ago
fde250a
uart_console.c: Don't redefine constants from board.h
by Harald Welte
· 9 years ago
715bc05
Increase serial console sped to 230400 bps
by Harald Welte
· 9 years ago
12d4bdf
mode_cardemu: Process RX interrupts before TX
by Harald Welte
· 9 years ago
dda7355
card_emu: Only transmit NULL byte from the right state
by Harald Welte
· 9 years ago
Next »