Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
simtrace2
/
140f007c3e2a15f8bdea79b08fbe50a8673d4ebd
« Previous
353351d
simtrace: add support for sniffing on both USART
by Kévin Redon
· 6 years ago
4091d78
board: comment USART definitions and add corresponding IRQ numbers
by Kévin Redon
· 6 years ago
ee62a9d
simtrace: add dedicated power pins configuration for sniffing
by Kévin Redon
· 6 years ago
45ad62d
sniff: use USART 0 instead of USART 1
by Kévin Redon
· 6 years ago
2c4e2af
SIMtrace board: comment and fix pin definition
by Kévin Redon
· 6 years ago
7b73462
sniff mode: handle USART 1 RX interrupt to show sniffer data
by Kévin Redon
· 6 years ago
36abece
enable (empty) sniffer support for SIMtrace board
by Kévin Redon
· 6 years ago
f9997e9
copy working cardem app to trace
by Kévin Redon
· 6 years ago
05cc7f6
ringbuffer: Don't print/TRAC from ringbuffer
by Harald Welte
· 6 years ago
4689345
echo all command characters entered on serial console
by Harald Welte
· 6 years ago
cb6e205
contrib/jenkins.sh: Also run firmware tests + build-test host software
by Harald Welte
· 6 years ago
bb2eb19
firmware/test: Add more include paths
by Harald Welte
· 6 years ago
9d90d28
Use system include <foo.h> notation for libosmocore headers
by Harald Welte
· 6 years ago
ebe8b20
Makefile: fix automatic creation of obj directory
by Harald Welte
· 6 years ago
105c1dc
add contrib/jenkins.sh for build verification
by Harald Welte
· 6 years ago
1cfc261
apps/dfu/main.c: Avoid variable declaration in for loop initial
by Harald Welte
· 6 years ago
a9bca48
ring buffer: increase buffer size from 128 to 256 to cope with large debug output
by Kévin Redon
· 6 years ago
eac1bec
console: use buffer and interrupts instead of busy loops for UART debug output
by Kévin Redon
· 6 years ago
51c128b
DFU: fix typo in USB strings
by Kévin Redon
· 6 years ago
869dbfa
DFU: incread watchdog timeout and restart watchdog before writing in flash to prevent the watchdog to trigger while flashing
by Kévin Redon
· 6 years ago
80303c1
DFU: only boot the application if it has a valid start
by Kévin Redon
· 6 years ago
d86cab0
DFU: uncomment print message when DFU is forced using the button
by Kévin Redon
· 6 years ago
b73f0a0
DFU: unlock the flash before writing, verify written data, and relock it
by Kévin Redon
· 6 years ago
f5869d4
USB: implement USB reset by setting the on-board pull-up on D+ low
by Kévin Redon
· 6 years ago
4136c24
USBD: send empty packet when non-existing descriptor string is requested
by Kévin Redon
· 6 years ago
318309f
dfu: fix address destination check and add stack overwrite check in USBDFU_handle_dnload
by Kévin Redon
· 6 years ago
0828b91
README: rewrite to better explain environment variables and point to the wiki for flashing
by Kévin Redon
· 6 years ago
76be7c8
fix pointer casting warning
by Kévin Redon
· 6 years ago
a38a126
fix: initialize uninitialized variable in USBDFU_DFU_RequestHandler
by Kévin Redon
· 6 years ago
6822716
add printf attribute declaration to remove warning
by Kévin Redon
· 6 years ago
a93f727
fix: remove duplicate volatile declaration
by Kévin Redon
· 6 years ago
432ba51
add copyright notice
by Kévin Redon
· 6 years ago
849d20e
Add firmware/TODO.txt that was not committed so far
by Harald Welte
· 6 years ago
e48d6f2
Add README.md
by Harald Welte
· 6 years ago
af616ec
CCID driver: Use USBD_GetDriver() instead of non-initialized state variable
by Harald Welte
· 7 years ago
6051e12
CCID: re-enable control request handler for CCID class requests
by Harald Welte
· 7 years ago
7f62c24
USB: Handle DFU requests by USBD.c to keep application callback
by Harald Welte
· 7 years ago
75cf93e
rename ccid.c to mode_ccid.c to align with mode_cardemu.c
by Harald Welte
· 7 years ago
2afd57f
cardem: Don't dispatch UART IRQs to possible NULL pointers
by Harald Welte
· 7 years ago
0633b25
iso7816_4: Re-trigger watchdog while waiting for character
by Harald Welte
· 7 years ago
c1e2254
simtrace: Boot into DFU when BOOTLOADER button is pressed
by Harald Welte
· 7 years ago
27f5fc6
DFU: Move "Override DFU" (force DFU) code to board-specific section
by Harald Welte
· 7 years ago
7b250bf
board_simtrace: Add minimal debug menu on debug USART
by Harald Welte
· 7 years ago
ed75c62
{ccid,sniffer}.c: Add comments on USB callbacks
by Harald Welte
· 7 years ago
5c08191
remove dead code (source/phone.c), superseded by card_emu.c/mode_cardemu.c
by Harald Welte
· 7 years ago
5e6e8dc
Make build of CCID code succeed again on BOARD=simtrace
by Harald Welte
· 7 years ago
c35998e
Makefile: Disable -Wundef and -Wsign-compare for now
by Harald Welte
· 7 years ago
ba2ad56
fix build of APP=cardem on BOARD=simtrace
by Harald Welte
· 7 years ago
fc87c24
mode_cardem: Build on platforms without WWAN_PERST suppotrt
by Harald Welte
· 7 years ago
f231541
Fix typos in usb.c, llist_irqsafe.h and dfu.h
by Harald Welte
· 7 years ago
119624f
WIP: use local_irq_{save,restore}()
by Harald Welte
· 7 years ago
7b36306
[firmware] WIP: make talloc irq-safe
by Harald Welte
· 7 years ago
eb50c9f
[firmware] sim_switch + wwan_perst: Don't re-initialize
by Harald Welte
· 7 years ago
965d5c9
[firmware] cardemu: Skip CARD_INSERT if board doesn't support it
by Harald Welte
· 7 years ago
514c6d1
[firmware] wwan_perst: Print index when releasing WWAN_PERST
by Harald Welte
· 7 years ago
e7f2f9a
[firmware] wwam_led: use 0/1 instead of 1/2
by Harald Welte
· 7 years ago
4e837d4
[firmware] card_pres: use modem number at start of line
by Harald Welte
· 7 years ago
b52b886
[firmware] card_pres: Use 0/1 index number instead of 1/2
by Harald Welte
· 7 years ago
c47fc5f
set local slot LED according to remote/local state.
by Harald Welte
· 7 years ago
02d0ec6
uart_console: Re-start watchdog during busy-waiting for serial chars
by Harald Welte
· 7 years ago
3b64695
Fix swapped manufacturer/product strings
by Harald Welte
· 7 years ago
0.4
a601635
host: Allow matching of device to USB path, not just address
by Harald Welte
· 7 years ago
v0.3
0.3
37ad41e
host: Ignore some more libusb error return codes
by Harald Welte
· 7 years ago
66de830
host: Switch SIM to remote and issue modem reset on startup
by Harald Welte
· 7 years ago
23c00b6
cardemu: Fix interpretation of MSGC_MODEM messages
by Harald Welte
· 7 years ago
2539917
dfu: make sure to not bloat the loader with main board init stuff.
by Harald Welte
· 7 years ago
0709d2d
perst/sim_switch: Log events using TRACE_INFO
by Harald Welte
· 7 years ago
44622df
consistently use 0-based counting of modems/slots
by Harald Welte
· 7 years ago
b91f6ad
firmware: fix various compiler warnings
by Harald Welte
· 7 years ago
9f38ddd
host: fix various compiler warnings
by Harald Welte
· 7 years ago
d039605
host: Split transport from slot
by Harald Welte
· 7 years ago
08b77ba
host: split the transport layer from card emulation
by Harald Welte
· 7 years ago
296c401
host: cosmetic cleanup, function renaming
by Harald Welte
· 7 years ago
5c583d3
Generalize SIM switching code and allow local/remote switching via USB
by Harald Welte
· 7 years ago
114e74d
wwan_perst: Warn if somebody failed to initialize us
by Harald Welte
· 7 years ago
2e9254a
cardem: Implement WWAN Modem reset via USB
by Harald Welte
· 7 years ago
cb093ce
wwan_perst: Support varying timeout and permanent active/inactive
by Harald Welte
· 7 years ago
25a9a80
Convert to new generalized SIMTRACE2 USB protocol
by Harald Welte
· 7 years ago
ed1efc5
qmod: debug_cmd: Avoid 'Unknown command' for valid commands
by Harald Welte
· 7 years ago
f8c83a4
Make hardfault handler a bit more verbose
by Harald Welte
· 7 years ago
2817498
qmod: Initialize ST12 specific I/O pins only on ST12
by Harald Welte
· 7 years ago
8e7fca3
migrate from req_ctx to msgb
by Harald Welte
· 7 years ago
eb81d23
import libosmocore msgb handling (and dependencies)
by Harald Welte
· 7 years ago
0380d74
Makefile: remove .p files during 'make clean'
by Harald Welte
· 7 years ago
9457bf7
Makefile: Don't warn about failed inlines
by Harald Welte
· 7 years ago
9ac794c
Add llist_add_irqsafe() similar to llist_add_tail_irqsafe()
by Harald Welte
· 7 years ago
41eb98b
board_gpio.gnumeric: Update to QMOD v3 (SIMPRES1/SIMPRES2)
by Harald Welte
· 7 years ago
caca0b1
Makefile: Add new 'combined' target to build combined DFU+APP image
by Harald Welte
· 7 years ago
6d1128e
QMOD: Add code to determine SIM Card presence
by Harald Welte
· 7 years ago
7e4390f
qmod: wwan_led.c: Fix handling of LED for second Modem
by Harald Welte
· 7 years ago
9164a6d
qmod: Disable various console commands on ST34
by Harald Welte
· 7 years ago
2cbc9b2
use same USB Product ID for DFU and runtime mode
by Harald Welte
· 7 years ago
8196e4d
remove old python userspace code
by Harald Welte
· 8 years ago
601e0d3
update + split README into general and firmware-specific part
by Harald Welte
· 8 years ago
3d4869c
add missing usbstring.c
by Harald Welte
· 8 years ago
353330d
qmod: Fix polarity of SPDT switch
by Harald Welte
· 8 years ago
3bbaba0
DFU: Disable LED blinking code
by Harald Welte
· 8 years ago
e8869fb
DFU: Resolve DFU runtime descriptor dynamically from descriptors
by Harald Welte
· 8 years ago
5b108d8
DFU: initialize g_dfu during real power up
by Harald Welte
· 8 years ago
96065ca
add simtrace2-list to .gitignore
by Harald Welte
· 8 years ago
Next »