contrib/simtrace.lua: Don't print SIMTRACE_MSGT_ in every COL_INFO
this is redundant. We care about *which* message type, and not about
wasting horizontal screen real-estate.
Change-Id: I98f90561b39401f1c2339f79a3cb40574bb03b2d
diff --git a/contrib/simtrace.lua b/contrib/simtrace.lua
index c5bdafb..4371dfa 100644
--- a/contrib/simtrace.lua
+++ b/contrib/simtrace.lua
@@ -13,26 +13,26 @@
[0x0001] = "SIMTRACE_CMD_BD_BOARD_INFO",
-- /* SIMTRACE_MSGC_CARDEM */
-[0x0101] = "SIMTRACE_MSGT_DT_CEMU_TX_DATA",
-[0x0102] = "SIMTRACE_MSGT_DT_CEMU_SET_ATR",
-[0x0103] = "SIMTRACE_MSGT_BD_CEMU_STATS",
-[0x0104] = "SIMTRACE_MSGT_BD_CEMU_STATUS",
-[0x0105] = "SIMTRACE_MSGT_DT_CEMU_CARDINSERT",
-[0x0106] = "SIMTRACE_MSGT_DO_CEMU_RX_DATA",
-[0x0107] = "SIMTRACE_MSGT_DO_CEMU_PTS",
-[0x0108] = "SIMTRACE_MSGT_BD_CEMU_CONFIG",
+[0x0101] = "DT_CEMU_TX_DATA",
+[0x0102] = "DT_CEMU_SET_ATR",
+[0x0103] = "BD_CEMU_STATS",
+[0x0104] = "BD_CEMU_STATUS",
+[0x0105] = "DT_CEMU_CARDINSERT",
+[0x0106] = "DO_CEMU_RX_DATA",
+[0x0107] = "DO_CEMU_PTS",
+[0x0108] = "BD_CEMU_CONFIG",
-- /* SIMTRACE_MSGC_MODEM */
-[0x0201] = "SIMTRACE_MSGT_DT_MODEM_RESET",
-[0x0202] = "SIMTRACE_MSGT_DT_MODEM_SIM_SELECT",
-[0x0203] = "SIMTRACE_MSGT_BD_MODEM_STATUS",
+[0x0201] = "DT_MODEM_RESET",
+[0x0202] = "DT_MODEM_SIM_SELECT",
+[0x0203] = "BD_MODEM_STATUS",
-- /* SIMTRACE_MSGC_SNIFF */
-[0x0300] = "SIMTRACE_MSGT_SNIFF_CHANGE",
-[0x0301] = "SIMTRACE_MSGT_SNIFF_FIDI",
-[0x0302] = "SIMTRACE_MSGT_SNIFF_ATR",
-[0x0304] = "SIMTRACE_MSGT_SNIFF_TPDU",
-[0x0303] = "SIMTRACE_MSGT_SNIFF_PPS"
+[0x0300] = "SNIFF_CHANGE",
+[0x0301] = "SNIFF_FIDI",
+[0x0302] = "SNIFF_ATR",
+[0x0304] = "SNIFF_TPDU",
+[0x0303] = "SNIFF_PPS"
}
local msgtype = ProtoField.uint16("usb_simtrace.msgtype", "Message Type", base.HEX_DEC, control_commands)