| usb_simtrace_protocol = Proto("USB_simtrace", "USB simtrace protocol") |
| |
| |
| local control_commands = { |
| -- /* SIMTRACE_MSGC_GENERIC */ |
| [0x0000] = "SIMTRACE_CMD_DO_ERROR", |
| [0x0001] = "SIMTRACE_CMD_BD_BOARD_INFO", |
| |
| -- /* SIMTRACE_MSGC_CARDEM */ |
| [0x0101] = "SIMTRACE_MSGT_DT_CEMU_TX_DATA", |
| [0x0102] = "SIMTRACE_MSGT_DT_CEMU_SET_ATR", |
| [0x0103] = "SIMTRACE_MSGT_BD_CEMU_STATS", |
| [0x0104] = "SIMTRACE_MSGT_BD_CEMU_STATUS", |
| [0x0105] = "SIMTRACE_MSGT_DT_CEMU_CARDINSERT", |
| [0x0106] = "SIMTRACE_MSGT_DO_CEMU_RX_DATA", |
| [0x0107] = "SIMTRACE_MSGT_DO_CEMU_PTS", |
| [0x0108] = "SIMTRACE_MSGT_BD_CEMU_CONFIG", |
| |
| -- /* SIMTRACE_MSGC_MODEM */ |
| [0x0201] = "SIMTRACE_MSGT_DT_MODEM_RESET", |
| [0x0202] = "SIMTRACE_MSGT_DT_MODEM_SIM_SELECT", |
| [0x0203] = "SIMTRACE_MSGT_BD_MODEM_STATUS", |
| |
| -- /* SIMTRACE_MSGC_SNIFF */ |
| [0x0300] = "SIMTRACE_MSGT_SNIFF_CHANGE", |
| [0x0301] = "SIMTRACE_MSGT_SNIFF_FIDI", |
| [0x0302] = "SIMTRACE_MSGT_SNIFF_ATR", |
| [0x0304] = "SIMTRACE_MSGT_SNIFF_TPDU", |
| [0x0303] = "SIMTRACE_MSGT_SNIFF_PPS" |
| } |
| |
| local msgtype = ProtoField.uint16("usb_simtrace.msgtype", "Message Type", base.HEX_DEC, control_commands) |
| local seqnr = ProtoField.uint8("usb_simtrace.seqnr", "Sequence Number", base.HEX_DEC) |
| local slotnr = ProtoField.uint8("usb_simtrace.slotnr", "Slot Number", base.HEX_DEC) |
| local reserved = ProtoField.uint16("usb_simtrace.reserved", "reserved", base.HEX_DEC) |
| local payloadlen = ProtoField.uint16("usb_simtrace.length", "length", base.HEX_DEC) |
| local payload = ProtoField.bytes("usb_simtrace.payload", "Data") |
| |
| local pb_and_rx = ProtoField.uint32("usb_simtrace.pb_and_rx", "pb_and_rx", base.HEX_DEC, NULL, 0x8) |
| local pb_and_tx = ProtoField.uint32("usb_simtrace.pb_and_tx", "pb_and_tx", base.HEX_DEC, NULL, 0x4) |
| local final = ProtoField.uint32("usb_simtrace.final", "final", base.HEX_DEC, NULL, 0x2) |
| local tpdu_hdr = ProtoField.uint32("usb_simtrace.tpdu_hdr", "tpdu_hdr", base.HEX_DEC, NULL, 0x1) |
| local rxtxdatalen = ProtoField.uint16("usb_simtrace.rxtxdatalen", "rx/tx data length", base.HEX_DEC) |
| local rxtxdata = ProtoField.bytes("usb_simtrace.rxtxdata", "rx/tx (data)") |
| |
| local CEMU_STATUS_F_VCC_PRESENT = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_VCC_PRESENT", "VCC_PRESENT", base.HEX_DEC, NULL, 0x00000001) |
| local CEMU_STATUS_F_CLK_ACTIVE = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_CLK_ACTIVE", "CLK_ACTIVE", base.HEX_DEC, NULL, 0x00000002) |
| local CEMU_STATUS_F_RCEMU_ACTIVE = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_RCEMU_ACTIVE", "CEMU_ACTIVE", base.HEX_DEC, NULL, 0x00000004) |
| local CEMU_STATUS_F_CARD_INSERT = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_CARD_INSERT", "CARD_INSERT", base.HEX_DEC, NULL, 0x00000008) |
| local CEMU_STATUS_F_RESET_ACTIVE = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_RESET_ACTIVE", "RESET_ACTIVE", base.HEX_DEC, NULL, 0x00000010) |
| |
| local modem_reset_types = { |
| [0x00] = "de-assert", |
| [0x01] = "assert", |
| [0x02] = "pulse" |
| } |
| local modem_reset_status = ProtoField.uint8("usb_simtrace.modem.reset_type", "modem reset type", base.HEX, modem_reset_types, 0xf) |
| local modem_reset_len = ProtoField.uint8("usb_simtrace.modem.reset_len", "modem reset length (ms)", base.DEC) |
| |
| usb_simtrace_protocol.fields = { |
| msgtype, seqnr, slotnr, reserved, payloadlen, payload, |
| pb_and_rx, pb_and_tx, final, tpdu_hdr, rxtxdatalen, rxtxdata, |
| CEMU_STATUS_F_VCC_PRESENT, CEMU_STATUS_F_CLK_ACTIVE, CEMU_STATUS_F_RCEMU_ACTIVE, CEMU_STATUS_F_CARD_INSERT, CEMU_STATUS_F_RESET_ACTIVE, |
| modem_reset_status, modem_reset_len |
| } |
| |
| local is_hdr = Field.new("usb_simtrace.tpdu_hdr") |
| local is_pbrx = Field.new("usb_simtrace.pb_and_rx") |
| local is_pbtx = Field.new("usb_simtrace.pb_and_tx") |
| local is_final= Field.new("usb_simtrace.final") |
| |
| function dissect_rxtx(payload_data,pinfo,tree) |
| |
| local headerSubtree = tree:add(usb_simtrace_protocol, payload_data, "rx/tx data") |
| local len = payload_data(4,2):le_uint(); |
| local cmd32 = payload_data(0,4):le_uint(); |
| |
| headerSubtree:add(pb_and_rx, cmd32) |
| headerSubtree:add(pb_and_tx, cmd32) |
| headerSubtree:add(final, cmd32) |
| headerSubtree:add(tpdu_hdr, cmd32) |
| |
| headerSubtree:add(rxtxdatalen, len) |
| headerSubtree:add_le(rxtxdata, payload_data(6,len)) |
| |
| -- ghetto dissection does not work due to mixed in procedure bytes |
| --if pinfo.visited == false then |
| -- Dissector.get("iso7816"):call(payload_data(6):tvb(), pinfo, tree) |
| |
| -- local offs = 0 |
| -- if (is_pbrx().value == 1 or is_pbtx().value == 1) and is_final().value == 0 then |
| -- offs = 1 |
| -- else |
| -- offs = 0 |
| -- end |
| -- |
| -- if is_hdr().value == 1 then |
| -- Dissector.get("gsm_sim"):call(concatss:tvb(), pinfo, tree) |
| -- concatss = payload_data(6):bytes() |
| -- else |
| -- concatss = concatss .. payload_data(6+offs):bytes() |
| -- end |
| |
| --end |
| |
| end |
| |
| function dissect_status(payload_data,pinfo,tree) |
| |
| local headerSubtree = tree:add(usb_simtrace_protocol, payload_data, "status message") |
| local cmd32 = payload_data(0,4):le_uint(); |
| |
| headerSubtree:add(CEMU_STATUS_F_VCC_PRESENT, cmd32) |
| headerSubtree:add(CEMU_STATUS_F_CLK_ACTIVE, cmd32) |
| headerSubtree:add(CEMU_STATUS_F_RCEMU_ACTIVE, cmd32) |
| headerSubtree:add(CEMU_STATUS_F_CARD_INSERT, cmd32) |
| headerSubtree:add(CEMU_STATUS_F_RESET_ACTIVE, cmd32) |
| |
| pinfo.cols.info:append(" VCC:" .. payload_data(0,1):bitfield(7, 1) .. " CLK:" .. payload_data(0,1):bitfield(6, 1) .. " RESET:" .. payload_data(0,1):bitfield(3, 1)) |
| end |
| |
| function dissect_atr(payload_data,pinfo,tree) |
| |
| local len = payload_data(0,1):le_uint() |
| Dissector.get("iso7816.atr"):call(payload_data(1):tvb(), pinfo, tree) |
| end |
| |
| function dissect_modem_reset(payload_data,pinfo,tree) |
| |
| local headerSubtree = tree:add(usb_simtrace_protocol, payload_data, "modem reset") |
| local cmd8 = payload_data(0,1):le_uint(); |
| |
| headerSubtree:add(modem_reset_status, cmd8) |
| pinfo.cols.info:append(" reset type:" .. modem_reset_types[cmd8]); |
| |
| if(cmd8 == 2) then |
| local duration = payload_data(1,2):le_uint() |
| headerSubtree:add(modem_reset_len, duration) |
| pinfo.cols.info:append(" duration:" .. duration .. "ms") |
| end |
| |
| |
| end |
| |
| function usb_simtrace_protocol.dissector(buffer, pinfo, tree) |
| length = buffer:len() |
| if length == 0 then return end |
| |
| pinfo.cols.protocol = usb_simtrace_protocol.name |
| |
| local subtree = tree:add(usb_simtrace_protocol, buffer(), "USB simtrace Data") |
| local command = buffer(0,2):uint() |
| |
| subtree:add(msgtype, command):set_generated() |
| subtree:add(seqnr, buffer(2,1)) |
| subtree:add(slotnr, buffer(3,1)) |
| subtree:add_le(payloadlen, buffer(6,2)) |
| pinfo.cols.info = string.format("Cmd 0x%04X : %s", command, control_commands[command]) |
| local payload_data = buffer(8,length-8) |
| if(command == 0x0101 or command == 0x0106) then |
| return dissect_rxtx(payload_data(),pinfo,subtree) |
| elseif(command == 0x0104) then |
| return dissect_status(payload_data(),pinfo,subtree) |
| elseif(command == 0x0102) then |
| return dissect_atr(payload_data(),pinfo,subtree) |
| elseif(command == 0x0201) then |
| return dissect_modem_reset(payload_data(),pinfo,subtree) |
| else |
| subtree:add(payload, payload_data) |
| end |
| |
| end |
| |
| |
| function usb_simtrace_protocol.init() |
| local usb_product_dissectors = DissectorTable.get("usb.product") |
| usb_product_dissectors:add(0x1d50616d, usb_simtrace_protocol) |
| usb_product_dissectors:add(0x1d50616e, usb_simtrace_protocol) |
| DissectorTable.get("usb.bulk"):add(0xffff, usb_simtrace_protocol) |
| DissectorTable.get("usb.interrupt"):add(0xffff, usb_simtrace_protocol) |
| --concatss = ByteArray.new() |
| end |