| /* OWHW board definition |
| * |
| * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de> |
| * (C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA |
| */ |
| #pragma once |
| #include "board_common.h" |
| #include "simtrace_usb.h" |
| |
| /** Name of the board */ |
| #define BOARD_NAME "OWHW" |
| /** Board definition */ |
| #define owhw |
| |
| /** oscillator used as main clock source (in Hz) */ |
| #define BOARD_MAINOSC 18432000 |
| /** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */ |
| #define BOARD_MCK 58982400 // 18.432 * 16 / 5 |
| |
| /** MCU pin connected to red LED */ |
| #define PIO_LED_RED PIO_PA17 |
| /** MCU pin connected to green LED */ |
| #define PIO_LED_GREEN PIO_PA18 |
| /** red LED pin definition */ |
| #define PIN_LED_RED {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} |
| /** green LED pin definition */ |
| #define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} |
| /** LEDs pin definition */ |
| #define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN |
| /** index for red LED in LEDs pin definition array */ |
| #define LED_NUM_RED 0 |
| /** index for green LED in LEDs pin definition array */ |
| #define LED_NUM_GREEN 1 |
| |
| /* pin connected to the SIMTRACE_BOOTLOADER signal. set high to force DFU bootloader start */ |
| #define PIN_BOOTLOADER {PIO_PA31, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} |
| |
| /* USIM 2 interface (USART) */ |
| #define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} |
| #define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} |
| #define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO |
| |
| /* USIM 2 interface (TC) */ |
| #define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} |
| #define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} |
| #define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC |
| |
| /* USIM 1 interface (USART) */ |
| #define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} |
| #define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} |
| #define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO |
| |
| /* USIM 1 interface (TC) */ |
| #define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} |
| #define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} |
| #define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC |
| |
| #define PIN_SET_USIM1_PRES {PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} |
| #define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} |
| #define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT} |
| |
| #define PIN_SET_USIM2_PRES {PIO_PA14, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} |
| #define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} |
| #define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT} |
| |
| #define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST, PIN_SET_USIM1_PRES |
| #define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST, PIN_SET_USIM2_PRES |
| |
| #define PINS_CARDSIM { PIN_SET_USIM1_PRES, PIN_SET_USIM2_PRES } |
| |
| #define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP |
| |
| #define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO |
| #define BOARD_USB_PRODUCT_ID USB_PRODUCT_OWHW_SAM3 |
| #define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_OWHW_SAM3_DFU |
| #define BOARD_USB_RELEASE 0x010 |
| |
| #define CARDEMU_SECOND_UART |
| /* Disable VCC/ADC detection, as OWHWv2 has no ADCVREF */ |
| //#define DETECT_VCC_BY_ADC |
| |
| #define HAVE_CARDEM |