| ################################################################################ |
| # LEGACY |
| ################################################################################ |
| |
| import abc |
| from smartcard.util import toBytes |
| from pytlv.TLV import * |
| |
| from pySim.cards import SimCardBase, UiccCardBase |
| from pySim.utils import dec_iccid, enc_iccid, dec_imsi, enc_imsi, dec_msisdn, enc_msisdn |
| from pySim.utils import enc_plmn, get_addr_type |
| from pySim.utils import is_hex, h2b, b2h, h2s, s2h, lpad, rpad |
| from pySim.legacy.utils import enc_ePDGSelection, format_xplmn_w_act, format_xplmn, dec_st, enc_st |
| from pySim.legacy.utils import format_ePDGSelection, dec_addr_tlv, enc_addr_tlv |
| from pySim.legacy.ts_51_011 import EF, DF |
| from pySim.legacy.ts_31_102 import EF_USIM_ADF_map |
| from pySim.legacy.ts_31_103 import EF_ISIM_ADF_map |
| |
| from pySim.ts_51_011 import EF_AD, EF_SPN |
| |
| def format_addr(addr: str, addr_type: str) -> str: |
| """ |
| helper function to format an FQDN (addr_type = '00') or IPv4 |
| (addr_type = '01') address string into a printable string that |
| contains the hexadecimal representation and the original address |
| string (addr) |
| """ |
| res = "" |
| if addr_type == '00': # FQDN |
| res += "\t%s # %s\n" % (s2h(addr), addr) |
| elif addr_type == '01': # IPv4 |
| octets = addr.split(".") |
| addr_hex = "" |
| for o in octets: |
| addr_hex += ("%02x" % int(o)) |
| res += "\t%s # %s\n" % (addr_hex, addr) |
| return res |
| |
| |
| |
| class SimCard(SimCardBase): |
| """Higher-layer class that is used *only* by legacy pySim-{prog,read}.""" |
| |
| def __init__(self, scc): |
| self._adm_chv_num = 4 |
| super().__init__(scc) |
| |
| def read_binary(self, ef, length=None, offset=0): |
| ef_path = ef in EF and EF[ef] or ef |
| return self._scc.read_binary(ef_path, length, offset) |
| |
| def read_record(self, ef, rec_no): |
| ef_path = ef in EF and EF[ef] or ef |
| return self._scc.read_record(ef_path, rec_no) |
| |
| def verify_adm(self, key): |
| """Authenticate with ADM key""" |
| (res, sw) = self._scc.verify_chv(self._adm_chv_num, key) |
| return sw |
| |
| def read_iccid(self): |
| (res, sw) = self._scc.read_binary(EF['ICCID']) |
| if sw == '9000': |
| return (dec_iccid(res), sw) |
| else: |
| return (None, sw) |
| |
| def update_iccid(self, iccid): |
| data, sw = self._scc.update_binary(EF['ICCID'], enc_iccid(iccid)) |
| return sw |
| |
| def read_imsi(self): |
| (res, sw) = self._scc.read_binary(EF['IMSI']) |
| if sw == '9000': |
| return (dec_imsi(res), sw) |
| else: |
| return (None, sw) |
| |
| def update_imsi(self, imsi): |
| data, sw = self._scc.update_binary(EF['IMSI'], enc_imsi(imsi)) |
| return sw |
| |
| def update_acc(self, acc): |
| data, sw = self._scc.update_binary(EF['ACC'], lpad(acc, 4, c='0')) |
| return sw |
| |
| def read_hplmn_act(self): |
| (res, sw) = self._scc.read_binary(EF['HPLMNAcT']) |
| if sw == '9000': |
| return (format_xplmn_w_act(res), sw) |
| else: |
| return (None, sw) |
| |
| def update_hplmn_act(self, mcc, mnc, access_tech='FFFF'): |
| """ |
| Update Home PLMN with access technology bit-field |
| |
| See Section "10.3.37 EFHPLMNwAcT (HPLMN Selector with Access Technology)" |
| in ETSI TS 151 011 for the details of the access_tech field coding. |
| Some common values: |
| access_tech = '0080' # Only GSM is selected |
| access_tech = 'FFFF' # All technologies selected, even Reserved for Future Use ones |
| """ |
| # get size and write EF.HPLMNwAcT |
| data = self._scc.read_binary(EF['HPLMNwAcT'], length=None, offset=0) |
| size = len(data[0]) // 2 |
| hplmn = enc_plmn(mcc, mnc) |
| content = hplmn + access_tech |
| data, sw = self._scc.update_binary( |
| EF['HPLMNwAcT'], content + 'ffffff0000' * (size // 5 - 1)) |
| return sw |
| |
| def read_oplmn_act(self): |
| (res, sw) = self._scc.read_binary(EF['OPLMNwAcT']) |
| if sw == '9000': |
| return (format_xplmn_w_act(res), sw) |
| else: |
| return (None, sw) |
| |
| def update_oplmn_act(self, mcc, mnc, access_tech='FFFF'): |
| """get size and write EF.OPLMNwAcT, See note in update_hplmn_act()""" |
| data = self._scc.read_binary(EF['OPLMNwAcT'], length=None, offset=0) |
| size = len(data[0]) // 2 |
| hplmn = enc_plmn(mcc, mnc) |
| content = hplmn + access_tech |
| data, sw = self._scc.update_binary( |
| EF['OPLMNwAcT'], content + 'ffffff0000' * (size // 5 - 1)) |
| return sw |
| |
| def read_plmn_act(self): |
| (res, sw) = self._scc.read_binary(EF['PLMNwAcT']) |
| if sw == '9000': |
| return (format_xplmn_w_act(res), sw) |
| else: |
| return (None, sw) |
| |
| def update_plmn_act(self, mcc, mnc, access_tech='FFFF'): |
| """get size and write EF.PLMNwAcT, See note in update_hplmn_act()""" |
| data = self._scc.read_binary(EF['PLMNwAcT'], length=None, offset=0) |
| size = len(data[0]) // 2 |
| hplmn = enc_plmn(mcc, mnc) |
| content = hplmn + access_tech |
| data, sw = self._scc.update_binary( |
| EF['PLMNwAcT'], content + 'ffffff0000' * (size // 5 - 1)) |
| return sw |
| |
| def update_plmnsel(self, mcc, mnc): |
| data = self._scc.read_binary(EF['PLMNsel'], length=None, offset=0) |
| size = len(data[0]) // 2 |
| hplmn = enc_plmn(mcc, mnc) |
| data, sw = self._scc.update_binary( |
| EF['PLMNsel'], hplmn + 'ff' * (size-3)) |
| return sw |
| |
| def update_smsp(self, smsp): |
| data, sw = self._scc.update_record(EF['SMSP'], 1, rpad(smsp, 84)) |
| return sw |
| |
| def update_ad(self, mnc=None, opmode=None, ofm=None, path=EF['AD']): |
| """ |
| Update Administrative Data (AD) |
| |
| See Sec. "4.2.18 EF_AD (Administrative Data)" |
| in 3GPP TS 31.102 for the details of the EF_AD contents. |
| |
| Set any parameter to None to keep old value(s) on card. |
| |
| Parameters: |
| mnc (str): MNC of IMSI |
| opmode (Hex-str, 1 Byte): MS Operation Mode |
| ofm (Hex-str, 1 Byte): Operational Feature Monitor (OFM) aka Ciphering Indicator |
| path (optional list with file path e.g. ['3f00', '7f20', '6fad']) |
| |
| Returns: |
| str: Return code of write operation |
| """ |
| |
| ad = EF_AD() |
| |
| # read from card |
| raw_hex_data, sw = self._scc.read_binary( |
| path, length=None, offset=0) |
| abstract_data = ad.decode_hex(raw_hex_data) |
| |
| # perform updates |
| if mnc and abstract_data['extensions']: |
| # Note: Since we derive the length of the MNC by the string length |
| # of the mnc parameter, the caller must ensure that mnc has the |
| # correct length and is padded with zeros (if necessary). |
| mnclen = len(str(mnc)) |
| if mnclen > 3 or mnclen < 2: |
| raise RuntimeError('invalid length of mnc "{}", expecting 2 or 3 digits'.format(mnc)) |
| abstract_data['extensions']['mnc_len'] = mnclen |
| if opmode: |
| opmode_num = int(opmode, 16) |
| if opmode_num in [int(v) for v in EF_AD.OP_MODE]: |
| abstract_data['ms_operation_mode'] = opmode_num |
| else: |
| raise RuntimeError('invalid opmode "{}"'.format(opmode)) |
| if ofm: |
| abstract_data['ofm'] = bool(int(ofm, 16)) |
| |
| # write to card |
| raw_hex_data = ad.encode_hex(abstract_data) |
| data, sw = self._scc.update_binary(path, raw_hex_data) |
| return sw |
| |
| def read_spn(self): |
| (content, sw) = self._scc.read_binary(EF['SPN']) |
| if sw == '9000': |
| abstract_data = EF_SPN().decode_hex(content) |
| show_in_hplmn = abstract_data['show_in_hplmn'] |
| hide_in_oplmn = abstract_data['hide_in_oplmn'] |
| name = abstract_data['spn'] |
| return ((name, show_in_hplmn, hide_in_oplmn), sw) |
| else: |
| return (None, sw) |
| |
| def update_spn(self, name="", show_in_hplmn=False, hide_in_oplmn=False): |
| abstract_data = { |
| 'hide_in_oplmn': hide_in_oplmn, |
| 'show_in_hplmn': show_in_hplmn, |
| 'spn': name, |
| } |
| content = EF_SPN().encode_hex(abstract_data) |
| data, sw = self._scc.update_binary(EF['SPN'], content) |
| return sw |
| |
| def read_gid1(self): |
| (res, sw) = self._scc.read_binary(EF['GID1']) |
| if sw == '9000': |
| return (res, sw) |
| else: |
| return (None, sw) |
| |
| def read_msisdn(self): |
| (res, sw) = self._scc.read_record(EF['MSISDN'], 1) |
| if sw == '9000': |
| return (dec_msisdn(res), sw) |
| else: |
| return (None, sw) |
| |
| |
| class UsimCard(UiccCardBase, SimCard): |
| """Higher-layer class that is used *only* by legacy pySim-{prog,read}.""" |
| |
| def read_ehplmn(self): |
| (res, sw) = self._scc.read_binary(EF_USIM_ADF_map['EHPLMN']) |
| if sw == '9000': |
| return (format_xplmn(res), sw) |
| else: |
| return (None, sw) |
| |
| def update_ehplmn(self, mcc, mnc): |
| data = self._scc.read_binary( |
| EF_USIM_ADF_map['EHPLMN'], length=None, offset=0) |
| size = len(data[0]) // 2 |
| ehplmn = enc_plmn(mcc, mnc) |
| data, sw = self._scc.update_binary(EF_USIM_ADF_map['EHPLMN'], ehplmn) |
| return sw |
| |
| def read_fplmn(self): |
| res, sw = self._scc.read_binary(EF_USIM_ADF_map['FPLMN']) |
| if sw == '9000': |
| return format_xplmn(res), sw |
| else: |
| return None, sw |
| |
| def update_fplmn(self, fplmn): |
| self._scc.select_file('3f00') |
| self.select_adf_by_aid('USIM') |
| size = self._scc.binary_size(EF_USIM_ADF_map['FPLMN']) |
| encoded = ''.join([enc_plmn(plmn[:3], plmn[3:]) for plmn in fplmn]) |
| encoded = rpad(encoded, size) |
| data, sw = self._scc.update_binary(EF_USIM_ADF_map['FPLMN'], encoded) |
| return sw |
| |
| def read_epdgid(self): |
| (res, sw) = self._scc.read_binary(EF_USIM_ADF_map['ePDGId']) |
| if sw == '9000': |
| try: |
| addr, addr_type = dec_addr_tlv(res) |
| except: |
| addr = None |
| addr_type = None |
| return (format_addr(addr, addr_type), sw) |
| else: |
| return (None, sw) |
| |
| def update_epdgid(self, epdgid): |
| size = self._scc.binary_size(EF_USIM_ADF_map['ePDGId']) * 2 |
| if len(epdgid) > 0: |
| addr_type = get_addr_type(epdgid) |
| if addr_type == None: |
| raise ValueError( |
| "Unknown ePDG Id address type or invalid address provided") |
| epdgid_tlv = rpad(enc_addr_tlv(epdgid, ('%02x' % addr_type)), size) |
| else: |
| epdgid_tlv = rpad('ff', size) |
| data, sw = self._scc.update_binary( |
| EF_USIM_ADF_map['ePDGId'], epdgid_tlv) |
| return sw |
| |
| def read_ePDGSelection(self): |
| (res, sw) = self._scc.read_binary(EF_USIM_ADF_map['ePDGSelection']) |
| if sw == '9000': |
| return (format_ePDGSelection(res), sw) |
| else: |
| return (None, sw) |
| |
| def update_ePDGSelection(self, mcc, mnc): |
| (res, sw) = self._scc.read_binary( |
| EF_USIM_ADF_map['ePDGSelection'], length=None, offset=0) |
| if sw == '9000' and (len(mcc) == 0 or len(mnc) == 0): |
| # Reset contents |
| # 80 - Tag value |
| (res, sw) = self._scc.update_binary( |
| EF_USIM_ADF_map['ePDGSelection'], rpad('', len(res))) |
| elif sw == '9000': |
| (res, sw) = self._scc.update_binary( |
| EF_USIM_ADF_map['ePDGSelection'], enc_ePDGSelection(res, mcc, mnc)) |
| return sw |
| |
| def read_ust(self): |
| (res, sw) = self._scc.read_binary(EF_USIM_ADF_map['UST']) |
| if sw == '9000': |
| # Print those which are available |
| return ([res, dec_st(res, table="usim")], sw) |
| else: |
| return ([None, None], sw) |
| |
| def update_ust(self, service, bit=1): |
| (res, sw) = self._scc.read_binary(EF_USIM_ADF_map['UST']) |
| if sw == '9000': |
| content = enc_st(res, service, bit) |
| (res, sw) = self._scc.update_binary( |
| EF_USIM_ADF_map['UST'], content) |
| return sw |
| |
| def update_est(self, service, bit=1): |
| (res, sw) = self._scc.read_binary(EF_USIM_ADF_map['EST']) |
| if sw == '9000': |
| content = enc_st(res, service, bit) |
| (res, sw) = self._scc.update_binary( |
| EF_USIM_ADF_map['EST'], content) |
| return sw |
| |
| |
| |
| class IsimCard(UiccCardBase): |
| """Higher-layer class that is used *only* by legacy pySim-{prog,read}.""" |
| |
| name = 'ISIM' |
| |
| def read_pcscf(self): |
| rec_cnt = self._scc.record_count(EF_ISIM_ADF_map['PCSCF']) |
| pcscf_recs = "" |
| for i in range(0, rec_cnt): |
| (res, sw) = self._scc.read_record(EF_ISIM_ADF_map['PCSCF'], i + 1) |
| if sw == '9000': |
| try: |
| addr, addr_type = dec_addr_tlv(res) |
| except: |
| addr = None |
| addr_type = None |
| content = format_addr(addr, addr_type) |
| pcscf_recs += "%s" % (len(content) |
| and content or '\tNot available\n') |
| else: |
| pcscf_recs += "\tP-CSCF: Can't read, response code = %s\n" % ( |
| sw) |
| return pcscf_recs |
| |
| def update_pcscf(self, pcscf): |
| if len(pcscf) > 0: |
| addr_type = get_addr_type(pcscf) |
| if addr_type == None: |
| raise ValueError( |
| "Unknown PCSCF address type or invalid address provided") |
| content = enc_addr_tlv(pcscf, ('%02x' % addr_type)) |
| else: |
| # Just the tag value |
| content = '80' |
| rec_size_bytes = self._scc.record_size(EF_ISIM_ADF_map['PCSCF']) |
| pcscf_tlv = rpad(content, rec_size_bytes*2) |
| data, sw = self._scc.update_record( |
| EF_ISIM_ADF_map['PCSCF'], 1, pcscf_tlv) |
| return sw |
| |
| def read_domain(self): |
| (res, sw) = self._scc.read_binary(EF_ISIM_ADF_map['DOMAIN']) |
| if sw == '9000': |
| # Skip the initial tag value ('80') byte and get length of contents |
| length = int(res[2:4], 16) |
| content = h2s(res[4:4+(length*2)]) |
| return (content, sw) |
| else: |
| return (None, sw) |
| |
| def update_domain(self, domain=None, mcc=None, mnc=None): |
| hex_str = "" |
| if domain: |
| hex_str = s2h(domain) |
| elif mcc and mnc: |
| # MCC and MNC always has 3 digits in domain form |
| plmn_str = 'mnc' + lpad(mnc, 3, "0") + '.mcc' + lpad(mcc, 3, "0") |
| hex_str = s2h('ims.' + plmn_str + '.3gppnetwork.org') |
| |
| # Build TLV |
| tlv = TLV(['80']) |
| content = tlv.build({'80': hex_str}) |
| |
| bin_size_bytes = self._scc.binary_size(EF_ISIM_ADF_map['DOMAIN']) |
| data, sw = self._scc.update_binary( |
| EF_ISIM_ADF_map['DOMAIN'], rpad(content, bin_size_bytes*2)) |
| return sw |
| |
| def read_impi(self): |
| (res, sw) = self._scc.read_binary(EF_ISIM_ADF_map['IMPI']) |
| if sw == '9000': |
| # Skip the initial tag value ('80') byte and get length of contents |
| length = int(res[2:4], 16) |
| content = h2s(res[4:4+(length*2)]) |
| return (content, sw) |
| else: |
| return (None, sw) |
| |
| def update_impi(self, impi=None): |
| hex_str = "" |
| if impi: |
| hex_str = s2h(impi) |
| # Build TLV |
| tlv = TLV(['80']) |
| content = tlv.build({'80': hex_str}) |
| |
| bin_size_bytes = self._scc.binary_size(EF_ISIM_ADF_map['IMPI']) |
| data, sw = self._scc.update_binary( |
| EF_ISIM_ADF_map['IMPI'], rpad(content, bin_size_bytes*2)) |
| return sw |
| |
| def read_impu(self): |
| rec_cnt = self._scc.record_count(EF_ISIM_ADF_map['IMPU']) |
| impu_recs = "" |
| for i in range(0, rec_cnt): |
| (res, sw) = self._scc.read_record(EF_ISIM_ADF_map['IMPU'], i + 1) |
| if sw == '9000': |
| # Skip the initial tag value ('80') byte and get length of contents |
| length = int(res[2:4], 16) |
| content = h2s(res[4:4+(length*2)]) |
| impu_recs += "\t%s\n" % (len(content) |
| and content or 'Not available') |
| else: |
| impu_recs += "IMS public user identity: Can't read, response code = %s\n" % ( |
| sw) |
| return impu_recs |
| |
| def update_impu(self, impu=None): |
| hex_str = "" |
| if impu: |
| hex_str = s2h(impu) |
| # Build TLV |
| tlv = TLV(['80']) |
| content = tlv.build({'80': hex_str}) |
| |
| rec_size_bytes = self._scc.record_size(EF_ISIM_ADF_map['IMPU']) |
| impu_tlv = rpad(content, rec_size_bytes*2) |
| data, sw = self._scc.update_record( |
| EF_ISIM_ADF_map['IMPU'], 1, impu_tlv) |
| return sw |
| |
| def read_iari(self): |
| rec_cnt = self._scc.record_count(EF_ISIM_ADF_map['UICCIARI']) |
| uiari_recs = "" |
| for i in range(0, rec_cnt): |
| (res, sw) = self._scc.read_record( |
| EF_ISIM_ADF_map['UICCIARI'], i + 1) |
| if sw == '9000': |
| # Skip the initial tag value ('80') byte and get length of contents |
| length = int(res[2:4], 16) |
| content = h2s(res[4:4+(length*2)]) |
| uiari_recs += "\t%s\n" % (len(content) |
| and content or 'Not available') |
| else: |
| uiari_recs += "UICC IARI: Can't read, response code = %s\n" % ( |
| sw) |
| return uiari_recs |
| |
| def update_ist(self, service, bit=1): |
| (res, sw) = self._scc.read_binary(EF_ISIM_ADF_map['IST']) |
| if sw == '9000': |
| content = enc_st(res, service, bit) |
| (res, sw) = self._scc.update_binary( |
| EF_ISIM_ADF_map['IST'], content) |
| return sw |
| |
| |
| class MagicSimBase(abc.ABC, SimCard): |
| """ |
| Theses cards uses several record based EFs to store the provider infos, |
| each possible provider uses a specific record number in each EF. The |
| indexes used are ( where N is the number of providers supported ) : |
| - [2 .. N+1] for the operator name |
| - [1 .. N] for the programmable EFs |
| |
| * 3f00/7f4d/8f0c : Operator Name |
| |
| bytes 0-15 : provider name, padded with 0xff |
| byte 16 : length of the provider name |
| byte 17 : 01 for valid records, 00 otherwise |
| |
| * 3f00/7f4d/8f0d : Programmable Binary EFs |
| |
| * 3f00/7f4d/8f0e : Programmable Record EFs |
| |
| """ |
| |
| _files = {} # type: Dict[str, Tuple[str, int, bool]] |
| _ki_file = None # type: Optional[str] |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| for p, l, t in kls._files.values(): |
| if not t: |
| continue |
| if scc.record_size(['3f00', '7f4d', p]) != l: |
| return None |
| except: |
| return None |
| |
| return kls(scc) |
| |
| def _get_count(self): |
| """ |
| Selects the file and returns the total number of entries |
| and entry size |
| """ |
| f = self._files['name'] |
| |
| r = self._scc.select_path(['3f00', '7f4d', f[0]]) |
| rec_len = int(r[-1][28:30], 16) |
| tlen = int(r[-1][4:8], 16) |
| rec_cnt = (tlen // rec_len) - 1 |
| |
| if (rec_cnt < 1) or (rec_len != f[1]): |
| raise RuntimeError('Bad card type') |
| |
| return rec_cnt |
| |
| def program(self, p): |
| # Go to dir |
| self._scc.select_path(['3f00', '7f4d']) |
| |
| # Home PLMN in PLMN_Sel format |
| hplmn = enc_plmn(p['mcc'], p['mnc']) |
| |
| # Operator name ( 3f00/7f4d/8f0c ) |
| self._scc.update_record(self._files['name'][0], 2, |
| rpad(b2h(p['name']), 32) + ('%02x' % |
| len(p['name'])) + '01' |
| ) |
| |
| # ICCID/IMSI/Ki/HPLMN ( 3f00/7f4d/8f0d ) |
| v = '' |
| |
| # inline Ki |
| if self._ki_file is None: |
| v += p['ki'] |
| |
| # ICCID |
| v += '3f00' + '2fe2' + '0a' + enc_iccid(p['iccid']) |
| |
| # IMSI |
| v += '7f20' + '6f07' + '09' + enc_imsi(p['imsi']) |
| |
| # Ki |
| if self._ki_file: |
| v += self._ki_file + '10' + p['ki'] |
| |
| # PLMN_Sel |
| v += '6f30' + '18' + rpad(hplmn, 36) |
| |
| # ACC |
| # This doesn't work with "fake" SuperSIM cards, |
| # but will hopefully work with real SuperSIMs. |
| if p.get('acc') is not None: |
| v += '6f78' + '02' + lpad(p['acc'], 4) |
| |
| self._scc.update_record(self._files['b_ef'][0], 1, |
| rpad(v, self._files['b_ef'][1]*2) |
| ) |
| |
| # SMSP ( 3f00/7f4d/8f0e ) |
| # FIXME |
| |
| # Write PLMN_Sel forcefully as well |
| r = self._scc.select_path(['3f00', '7f20', '6f30']) |
| tl = int(r[-1][4:8], 16) |
| |
| hplmn = enc_plmn(p['mcc'], p['mnc']) |
| self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3)) |
| |
| def erase(self): |
| # Dummy |
| df = {} |
| for k, v in self._files.items(): |
| ofs = 1 |
| fv = v[1] * 'ff' |
| if k == 'name': |
| ofs = 2 |
| fv = fv[0:-4] + '0000' |
| df[v[0]] = (fv, ofs) |
| |
| # Write |
| for n in range(0, self._get_count()): |
| for k, (msg, ofs) in df.items(): |
| self._scc.update_record(['3f00', '7f4d', k], n + ofs, msg) |
| |
| |
| class SuperSim(MagicSimBase): |
| |
| name = 'supersim' |
| |
| _files = { |
| 'name': ('8f0c', 18, True), |
| 'b_ef': ('8f0d', 74, True), |
| 'r_ef': ('8f0e', 50, True), |
| } |
| |
| _ki_file = None |
| |
| |
| class MagicSim(MagicSimBase): |
| |
| name = 'magicsim' |
| |
| _files = { |
| 'name': ('8f0c', 18, True), |
| 'b_ef': ('8f0d', 130, True), |
| 'r_ef': ('8f0e', 102, False), |
| } |
| |
| _ki_file = '6f1b' |
| |
| |
| class FakeMagicSim(SimCard): |
| """ |
| Theses cards have a record based EF 3f00/000c that contains the provider |
| information. See the program method for its format. The records go from |
| 1 to N. |
| """ |
| |
| name = 'fakemagicsim' |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| if scc.record_size(['3f00', '000c']) != 0x5a: |
| return None |
| except: |
| return None |
| |
| return kls(scc) |
| |
| def _get_infos(self): |
| """ |
| Selects the file and returns the total number of entries |
| and entry size |
| """ |
| |
| r = self._scc.select_path(['3f00', '000c']) |
| rec_len = int(r[-1][28:30], 16) |
| tlen = int(r[-1][4:8], 16) |
| rec_cnt = (tlen // rec_len) - 1 |
| |
| if (rec_cnt < 1) or (rec_len != 0x5a): |
| raise RuntimeError('Bad card type') |
| |
| return rec_cnt, rec_len |
| |
| def program(self, p): |
| # Home PLMN |
| r = self._scc.select_path(['3f00', '7f20', '6f30']) |
| tl = int(r[-1][4:8], 16) |
| |
| hplmn = enc_plmn(p['mcc'], p['mnc']) |
| self._scc.update_binary('6f30', hplmn + 'ff' * (tl-3)) |
| |
| # Get total number of entries and entry size |
| rec_cnt, rec_len = self._get_infos() |
| |
| # Set first entry |
| entry = ( |
| '81' + # 1b Status: Valid & Active |
| rpad(s2h(p['name'][0:14]), 28) + # 14b Entry Name |
| enc_iccid(p['iccid']) + # 10b ICCID |
| enc_imsi(p['imsi']) + # 9b IMSI_len + id_type(9) + IMSI |
| p['ki'] + # 16b Ki |
| lpad(p['smsp'], 80) # 40b SMSP (padded with ff if needed) |
| ) |
| self._scc.update_record('000c', 1, entry) |
| |
| def erase(self): |
| # Get total number of entries and entry size |
| rec_cnt, rec_len = self._get_infos() |
| |
| # Erase all entries |
| entry = 'ff' * rec_len |
| for i in range(0, rec_cnt): |
| self._scc.update_record('000c', 1+i, entry) |
| |
| |
| class GrcardSim(SimCard): |
| """ |
| Greencard (grcard.cn) HZCOS GSM SIM |
| These cards have a much more regular ISO 7816-4 / TS 11.11 structure, |
| and use standard UPDATE RECORD / UPDATE BINARY commands except for Ki. |
| """ |
| |
| name = 'grcardsim' |
| |
| @classmethod |
| def autodetect(kls, scc): |
| return None |
| |
| def program(self, p): |
| # We don't really know yet what ADM PIN 4 is about |
| #self._scc.verify_chv(4, h2b("4444444444444444")) |
| |
| # Authenticate using ADM PIN 5 |
| if p['pin_adm']: |
| pin = h2b(p['pin_adm']) |
| else: |
| pin = h2b("4444444444444444") |
| self._scc.verify_chv(5, pin) |
| |
| # EF.ICCID |
| r = self._scc.select_path(['3f00', '2fe2']) |
| data, sw = self._scc.update_binary('2fe2', enc_iccid(p['iccid'])) |
| |
| # EF.IMSI |
| r = self._scc.select_path(['3f00', '7f20', '6f07']) |
| data, sw = self._scc.update_binary('6f07', enc_imsi(p['imsi'])) |
| |
| # EF.ACC |
| if p.get('acc') is not None: |
| data, sw = self._scc.update_binary('6f78', lpad(p['acc'], 4)) |
| |
| # EF.SMSP |
| if p.get('smsp'): |
| r = self._scc.select_path(['3f00', '7f10', '6f42']) |
| data, sw = self._scc.update_record('6f42', 1, lpad(p['smsp'], 80)) |
| |
| # Set the Ki using proprietary command |
| pdu = '80d4020010' + p['ki'] |
| data, sw = self._scc._tp.send_apdu(pdu) |
| |
| # EF.HPLMN |
| r = self._scc.select_path(['3f00', '7f20', '6f30']) |
| size = int(r[-1][4:8], 16) |
| hplmn = enc_plmn(p['mcc'], p['mnc']) |
| self._scc.update_binary('6f30', hplmn + 'ff' * (size-3)) |
| |
| # EF.SPN (Service Provider Name) |
| r = self._scc.select_path(['3f00', '7f20', '6f30']) |
| size = int(r[-1][4:8], 16) |
| # FIXME |
| |
| # FIXME: EF.MSISDN |
| |
| |
| class SysmoSIMgr1(GrcardSim): |
| """ |
| sysmocom sysmoSIM-GR1 |
| These cards have a much more regular ISO 7816-4 / TS 11.11 structure, |
| and use standard UPDATE RECORD / UPDATE BINARY commands except for Ki. |
| """ |
| name = 'sysmosim-gr1' |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| # Look for ATR |
| if scc.get_atr() == toBytes("3B 99 18 00 11 88 22 33 44 55 66 77 60"): |
| return kls(scc) |
| except: |
| return None |
| return None |
| |
| |
| class SysmoUSIMgr1(UsimCard): |
| """ |
| sysmocom sysmoUSIM-GR1 |
| """ |
| name = 'sysmoUSIM-GR1' |
| |
| @classmethod |
| def autodetect(kls, scc): |
| # TODO: Access the ATR |
| return None |
| |
| def program(self, p): |
| # TODO: check if verify_chv could be used or what it needs |
| # self._scc.verify_chv(0x0A, [0x33,0x32,0x32,0x31,0x33,0x32,0x33,0x32]) |
| # Unlock the card.. |
| data, sw = self._scc._tp.send_apdu_checksw( |
| "0020000A083332323133323332") |
| |
| # TODO: move into SimCardCommands |
| par = (p['ki'] + # 16b K |
| p['opc'] + # 32b OPC |
| enc_iccid(p['iccid']) + # 10b ICCID |
| enc_imsi(p['imsi']) # 9b IMSI_len + id_type(9) + IMSI |
| ) |
| data, sw = self._scc._tp.send_apdu_checksw("0099000033" + par) |
| |
| |
| class SysmoSIMgr2(SimCard): |
| """ |
| sysmocom sysmoSIM-GR2 |
| """ |
| |
| name = 'sysmoSIM-GR2' |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| # Look for ATR |
| if scc.get_atr() == toBytes("3B 7D 94 00 00 55 55 53 0A 74 86 93 0B 24 7C 4D 54 68"): |
| return kls(scc) |
| except: |
| return None |
| return None |
| |
| def program(self, p): |
| |
| # select MF |
| r = self._scc.select_path(['3f00']) |
| |
| # authenticate as SUPER ADM using default key |
| self._scc.verify_chv(0x0b, h2b("3838383838383838")) |
| |
| # set ADM pin using proprietary command |
| # INS: D4 |
| # P1: 3A for PIN, 3B for PUK |
| # P2: CHV number, as in VERIFY CHV for PIN, and as in UNBLOCK CHV for PUK |
| # P3: 08, CHV length (curiously the PUK is also 08 length, instead of 10) |
| if p['pin_adm']: |
| pin = h2b(p['pin_adm']) |
| else: |
| pin = h2b("4444444444444444") |
| |
| pdu = 'A0D43A0508' + b2h(pin) |
| data, sw = self._scc._tp.send_apdu(pdu) |
| |
| # authenticate as ADM (enough to write file, and can set PINs) |
| |
| self._scc.verify_chv(0x05, pin) |
| |
| # write EF.ICCID |
| data, sw = self._scc.update_binary('2fe2', enc_iccid(p['iccid'])) |
| |
| # select DF_GSM |
| r = self._scc.select_path(['7f20']) |
| |
| # write EF.IMSI |
| data, sw = self._scc.update_binary('6f07', enc_imsi(p['imsi'])) |
| |
| # write EF.ACC |
| if p.get('acc') is not None: |
| data, sw = self._scc.update_binary('6f78', lpad(p['acc'], 4)) |
| |
| # get size and write EF.HPLMN |
| r = self._scc.select_path(['6f30']) |
| size = int(r[-1][4:8], 16) |
| hplmn = enc_plmn(p['mcc'], p['mnc']) |
| self._scc.update_binary('6f30', hplmn + 'ff' * (size-3)) |
| |
| # set COMP128 version 0 in proprietary file |
| data, sw = self._scc.update_binary('0001', '001000') |
| |
| # set Ki in proprietary file |
| data, sw = self._scc.update_binary('0001', p['ki'], 3) |
| |
| # select DF_TELECOM |
| r = self._scc.select_path(['3f00', '7f10']) |
| |
| # write EF.SMSP |
| if p.get('smsp'): |
| data, sw = self._scc.update_record('6f42', 1, lpad(p['smsp'], 80)) |
| |
| |
| class SysmoUSIMSJS1(UsimCard): |
| """ |
| sysmocom sysmoUSIM-SJS1 |
| """ |
| |
| name = 'sysmoUSIM-SJS1' |
| |
| def __init__(self, ssc): |
| super(SysmoUSIMSJS1, self).__init__(ssc) |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| # Look for ATR |
| if scc.get_atr() == toBytes("3B 9F 96 80 1F C7 80 31 A0 73 BE 21 13 67 43 20 07 18 00 00 01 A5"): |
| return kls(scc) |
| except: |
| return None |
| return None |
| |
| def verify_adm(self, key): |
| # authenticate as ADM using default key (written on the card..) |
| if not key: |
| raise ValueError( |
| "Please provide a PIN-ADM as there is no default one") |
| (res, sw) = self._scc.verify_chv(0x0A, key) |
| return sw |
| |
| def program(self, p): |
| self.verify_adm(h2b(p['pin_adm'])) |
| |
| # select MF |
| r = self._scc.select_path(['3f00']) |
| |
| # write EF.ICCID |
| data, sw = self._scc.update_binary('2fe2', enc_iccid(p['iccid'])) |
| |
| # select DF_GSM |
| r = self._scc.select_path(['7f20']) |
| |
| # set Ki in proprietary file |
| data, sw = self._scc.update_binary('00FF', p['ki']) |
| |
| # set OPc in proprietary file |
| if 'opc' in p: |
| content = "01" + p['opc'] |
| data, sw = self._scc.update_binary('00F7', content) |
| |
| # set Service Provider Name |
| if p.get('name') is not None: |
| self.update_spn(p['name'], True, True) |
| |
| if p.get('acc') is not None: |
| self.update_acc(p['acc']) |
| |
| # write EF.IMSI |
| data, sw = self._scc.update_binary('6f07', enc_imsi(p['imsi'])) |
| |
| # EF.PLMNsel |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_plmnsel(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming PLMNsel failed with code %s" % sw) |
| |
| # EF.PLMNwAcT |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_plmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming PLMNwAcT failed with code %s" % sw) |
| |
| # EF.OPLMNwAcT |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_oplmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming OPLMNwAcT failed with code %s" % sw) |
| |
| # EF.HPLMNwAcT |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_hplmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming HPLMNwAcT failed with code %s" % sw) |
| |
| # EF.AD |
| if (p.get('mcc') and p.get('mnc')) or p.get('opmode'): |
| if p.get('mcc') and p.get('mnc'): |
| mnc = p['mnc'] |
| else: |
| mnc = None |
| sw = self.update_ad(mnc=mnc, opmode=p.get('opmode')) |
| if sw != '9000': |
| print("Programming AD failed with code %s" % sw) |
| |
| # EF.SMSP |
| if p.get('smsp'): |
| r = self._scc.select_path(['3f00', '7f10']) |
| data, sw = self._scc.update_record( |
| '6f42', 1, lpad(p['smsp'], 104), force_len=True) |
| |
| # EF.MSISDN |
| # TODO: Alpha Identifier (currently 'ff'O * 20) |
| # TODO: Capability/Configuration1 Record Identifier |
| # TODO: Extension1 Record Identifier |
| if p.get('msisdn') is not None: |
| msisdn = enc_msisdn(p['msisdn']) |
| data = 'ff' * 20 + msisdn |
| |
| r = self._scc.select_path(['3f00', '7f10']) |
| data, sw = self._scc.update_record('6F40', 1, data, force_len=True) |
| |
| |
| class FairwavesSIM(UsimCard): |
| """ |
| FairwavesSIM |
| |
| The SIM card is operating according to the standard. |
| For Ki/OP/OPC programming the following files are additionally open for writing: |
| 3F00/7F20/FF01 – OP/OPC: |
| byte 1 = 0x01, bytes 2-17: OPC; |
| byte 1 = 0x00, bytes 2-17: OP; |
| 3F00/7F20/FF02: Ki |
| """ |
| |
| name = 'Fairwaves-SIM' |
| # Propriatary files |
| _EF_num = { |
| 'Ki': 'FF02', |
| 'OP/OPC': 'FF01', |
| } |
| _EF = { |
| 'Ki': DF['GSM']+[_EF_num['Ki']], |
| 'OP/OPC': DF['GSM']+[_EF_num['OP/OPC']], |
| } |
| |
| def __init__(self, ssc): |
| super(FairwavesSIM, self).__init__(ssc) |
| self._adm_chv_num = 0x11 |
| self._adm2_chv_num = 0x12 |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| # Look for ATR |
| if scc.get_atr() == toBytes("3B 9F 96 80 1F C7 80 31 A0 73 BE 21 13 67 44 22 06 10 00 00 01 A9"): |
| return kls(scc) |
| except: |
| return None |
| return None |
| |
| def verify_adm2(self, key): |
| ''' |
| Authenticate with ADM2 key. |
| |
| Fairwaves SIM cards support hierarchical key structure and ADM2 key |
| is a key which has access to proprietary files (Ki and OP/OPC). |
| That said, ADM key inherits permissions of ADM2 key and thus we rarely |
| need ADM2 key per se. |
| ''' |
| (res, sw) = self._scc.verify_chv(self._adm2_chv_num, key) |
| return sw |
| |
| def read_ki(self): |
| """ |
| Read Ki in proprietary file. |
| |
| Requires ADM1 access level |
| """ |
| return self._scc.read_binary(self._EF['Ki']) |
| |
| def update_ki(self, ki): |
| """ |
| Set Ki in proprietary file. |
| |
| Requires ADM1 access level |
| """ |
| data, sw = self._scc.update_binary(self._EF['Ki'], ki) |
| return sw |
| |
| def read_op_opc(self): |
| """ |
| Read Ki in proprietary file. |
| |
| Requires ADM1 access level |
| """ |
| (ef, sw) = self._scc.read_binary(self._EF['OP/OPC']) |
| type = 'OP' if ef[0:2] == '00' else 'OPC' |
| return ((type, ef[2:]), sw) |
| |
| def update_op(self, op): |
| """ |
| Set OP in proprietary file. |
| |
| Requires ADM1 access level |
| """ |
| content = '00' + op |
| data, sw = self._scc.update_binary(self._EF['OP/OPC'], content) |
| return sw |
| |
| def update_opc(self, opc): |
| """ |
| Set OPC in proprietary file. |
| |
| Requires ADM1 access level |
| """ |
| content = '01' + opc |
| data, sw = self._scc.update_binary(self._EF['OP/OPC'], content) |
| return sw |
| |
| def program(self, p): |
| # For some reason the card programming only works when the card |
| # is handled as a classic SIM, even though it is an USIM, so we |
| # reconfigure the class byte and the select control field on |
| # the fly. When the programming is done the original values are |
| # restored. |
| cla_byte_orig = self._scc.cla_byte |
| sel_ctrl_orig = self._scc.sel_ctrl |
| self._scc.cla_byte = "a0" |
| self._scc.sel_ctrl = "0000" |
| |
| try: |
| self._program(p) |
| finally: |
| # restore original cla byte and sel ctrl |
| self._scc.cla_byte = cla_byte_orig |
| self._scc.sel_ctrl = sel_ctrl_orig |
| |
| def _program(self, p): |
| # authenticate as ADM1 |
| if not p['pin_adm']: |
| raise ValueError( |
| "Please provide a PIN-ADM as there is no default one") |
| self.verify_adm(h2b(p['pin_adm'])) |
| |
| # TODO: Set operator name |
| if p.get('smsp') is not None: |
| sw = self.update_smsp(p['smsp']) |
| if sw != '9000': |
| print("Programming SMSP failed with code %s" % sw) |
| # This SIM doesn't support changing ICCID |
| if p.get('mcc') is not None and p.get('mnc') is not None: |
| sw = self.update_hplmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming MCC/MNC failed with code %s" % sw) |
| if p.get('imsi') is not None: |
| sw = self.update_imsi(p['imsi']) |
| if sw != '9000': |
| print("Programming IMSI failed with code %s" % sw) |
| if p.get('ki') is not None: |
| sw = self.update_ki(p['ki']) |
| if sw != '9000': |
| print("Programming Ki failed with code %s" % sw) |
| if p.get('opc') is not None: |
| sw = self.update_opc(p['opc']) |
| if sw != '9000': |
| print("Programming OPC failed with code %s" % sw) |
| if p.get('acc') is not None: |
| sw = self.update_acc(p['acc']) |
| if sw != '9000': |
| print("Programming ACC failed with code %s" % sw) |
| |
| |
| class OpenCellsSim(SimCard): |
| """ |
| OpenCellsSim |
| |
| """ |
| |
| name = 'OpenCells-SIM' |
| |
| def __init__(self, ssc): |
| super(OpenCellsSim, self).__init__(ssc) |
| self._adm_chv_num = 0x0A |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| # Look for ATR |
| if scc.get_atr() == toBytes("3B 9F 95 80 1F C3 80 31 E0 73 FE 21 13 57 86 81 02 86 98 44 18 A8"): |
| return kls(scc) |
| except: |
| return None |
| return None |
| |
| def program(self, p): |
| if not p['pin_adm']: |
| raise ValueError( |
| "Please provide a PIN-ADM as there is no default one") |
| self._scc.verify_chv(0x0A, h2b(p['pin_adm'])) |
| |
| # select MF |
| r = self._scc.select_path(['3f00']) |
| |
| # write EF.ICCID |
| data, sw = self._scc.update_binary('2fe2', enc_iccid(p['iccid'])) |
| |
| r = self._scc.select_path(['7ff0']) |
| |
| # set Ki in proprietary file |
| data, sw = self._scc.update_binary('FF02', p['ki']) |
| |
| # set OPC in proprietary file |
| data, sw = self._scc.update_binary('FF01', p['opc']) |
| |
| # select DF_GSM |
| r = self._scc.select_path(['7f20']) |
| |
| # write EF.IMSI |
| data, sw = self._scc.update_binary('6f07', enc_imsi(p['imsi'])) |
| |
| |
| class WavemobileSim(UsimCard): |
| """ |
| WavemobileSim |
| |
| """ |
| |
| name = 'Wavemobile-SIM' |
| |
| def __init__(self, ssc): |
| super(WavemobileSim, self).__init__(ssc) |
| self._adm_chv_num = 0x0A |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| # Look for ATR |
| if scc.get_atr() == toBytes("3B 9F 95 80 1F C7 80 31 E0 73 F6 21 13 67 4D 45 16 00 43 01 00 8F"): |
| return kls(scc) |
| except: |
| return None |
| return None |
| |
| def program(self, p): |
| if not p['pin_adm']: |
| raise ValueError( |
| "Please provide a PIN-ADM as there is no default one") |
| self.verify_adm(h2b(p['pin_adm'])) |
| |
| # EF.ICCID |
| # TODO: Add programming of the ICCID |
| if p.get('iccid'): |
| print( |
| "Warning: Programming of the ICCID is not implemented for this type of card.") |
| |
| # KI (Presumably a proprietary file) |
| # TODO: Add programming of KI |
| if p.get('ki'): |
| print( |
| "Warning: Programming of the KI is not implemented for this type of card.") |
| |
| # OPc (Presumably a proprietary file) |
| # TODO: Add programming of OPc |
| if p.get('opc'): |
| print( |
| "Warning: Programming of the OPc is not implemented for this type of card.") |
| |
| # EF.SMSP |
| if p.get('smsp'): |
| sw = self.update_smsp(p['smsp']) |
| if sw != '9000': |
| print("Programming SMSP failed with code %s" % sw) |
| |
| # EF.IMSI |
| if p.get('imsi'): |
| sw = self.update_imsi(p['imsi']) |
| if sw != '9000': |
| print("Programming IMSI failed with code %s" % sw) |
| |
| # EF.ACC |
| if p.get('acc'): |
| sw = self.update_acc(p['acc']) |
| if sw != '9000': |
| print("Programming ACC failed with code %s" % sw) |
| |
| # EF.PLMNsel |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_plmnsel(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming PLMNsel failed with code %s" % sw) |
| |
| # EF.PLMNwAcT |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_plmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming PLMNwAcT failed with code %s" % sw) |
| |
| # EF.OPLMNwAcT |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_oplmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming OPLMNwAcT failed with code %s" % sw) |
| |
| # EF.AD |
| if (p.get('mcc') and p.get('mnc')) or p.get('opmode'): |
| if p.get('mcc') and p.get('mnc'): |
| mnc = p['mnc'] |
| else: |
| mnc = None |
| sw = self.update_ad(mnc=mnc, opmode=p.get('opmode')) |
| if sw != '9000': |
| print("Programming AD failed with code %s" % sw) |
| |
| return None |
| |
| |
| class SysmoISIMSJA2(UsimCard, IsimCard): |
| """ |
| sysmocom sysmoISIM-SJA2 |
| """ |
| |
| name = 'sysmoISIM-SJA2' |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| # Try card model #1 |
| atr = "3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9" |
| if scc.get_atr() == toBytes(atr): |
| return kls(scc) |
| |
| # Try card model #2 |
| atr = "3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 31 33 02 51 B2" |
| if scc.get_atr() == toBytes(atr): |
| return kls(scc) |
| |
| # Try card model #3 |
| atr = "3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 52 75 31 04 51 D5" |
| if scc.get_atr() == toBytes(atr): |
| return kls(scc) |
| except: |
| return None |
| return None |
| |
| def verify_adm(self, key): |
| # authenticate as ADM using default key (written on the card..) |
| if not key: |
| raise ValueError( |
| "Please provide a PIN-ADM as there is no default one") |
| (res, sw) = self._scc.verify_chv(0x0A, key) |
| return sw |
| |
| def program(self, p): |
| self.verify_adm(h2b(p['pin_adm'])) |
| |
| # Populate AIDs |
| self.read_aids() |
| |
| # This type of card does not allow to reprogram the ICCID. |
| # Reprogramming the ICCID would mess up the card os software |
| # license management, so the ICCID must be kept at its factory |
| # setting! |
| if p.get('iccid'): |
| print( |
| "Warning: Programming of the ICCID is not implemented for this type of card.") |
| |
| # select DF_GSM |
| self._scc.select_path(['7f20']) |
| |
| # set Service Provider Name |
| if p.get('name') is not None: |
| self.update_spn(p['name'], True, True) |
| |
| # write EF.IMSI |
| if p.get('imsi'): |
| self._scc.update_binary('6f07', enc_imsi(p['imsi'])) |
| |
| # EF.PLMNsel |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_plmnsel(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming PLMNsel failed with code %s" % sw) |
| |
| # EF.PLMNwAcT |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_plmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming PLMNwAcT failed with code %s" % sw) |
| |
| # EF.OPLMNwAcT |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_oplmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming OPLMNwAcT failed with code %s" % sw) |
| |
| # EF.HPLMNwAcT |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_hplmn_act(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming HPLMNwAcT failed with code %s" % sw) |
| |
| # EF.AD |
| if (p.get('mcc') and p.get('mnc')) or p.get('opmode'): |
| if p.get('mcc') and p.get('mnc'): |
| mnc = p['mnc'] |
| else: |
| mnc = None |
| sw = self.update_ad(mnc=mnc, opmode=p.get('opmode')) |
| if sw != '9000': |
| print("Programming AD failed with code %s" % sw) |
| |
| # EF.SMSP |
| if p.get('smsp'): |
| r = self._scc.select_path(['3f00', '7f10']) |
| data, sw = self._scc.update_record( |
| '6f42', 1, lpad(p['smsp'], 104), force_len=True) |
| |
| # EF.MSISDN |
| # TODO: Alpha Identifier (currently 'ff'O * 20) |
| # TODO: Capability/Configuration1 Record Identifier |
| # TODO: Extension1 Record Identifier |
| if p.get('msisdn') is not None: |
| msisdn = enc_msisdn(p['msisdn']) |
| content = 'ff' * 20 + msisdn |
| |
| r = self._scc.select_path(['3f00', '7f10']) |
| data, sw = self._scc.update_record( |
| '6F40', 1, content, force_len=True) |
| |
| # EF.ACC |
| if p.get('acc'): |
| sw = self.update_acc(p['acc']) |
| if sw != '9000': |
| print("Programming ACC failed with code %s" % sw) |
| |
| # update EF-SIM_AUTH_KEY (and EF-USIM_AUTH_KEY_2G, which is |
| # hard linked to EF-USIM_AUTH_KEY) |
| self._scc.select_path(['3f00']) |
| self._scc.select_path(['a515']) |
| if p.get('ki'): |
| self._scc.update_binary('6f20', p['ki'], 1) |
| if p.get('opc'): |
| self._scc.update_binary('6f20', p['opc'], 17) |
| |
| # update EF-USIM_AUTH_KEY in ADF.ISIM |
| if self.adf_present("isim"): |
| self.select_adf_by_aid(adf="isim") |
| |
| if p.get('ki'): |
| self._scc.update_binary('af20', p['ki'], 1) |
| if p.get('opc'): |
| self._scc.update_binary('af20', p['opc'], 17) |
| |
| # update EF.P-CSCF in ADF.ISIM |
| if self.file_exists(EF_ISIM_ADF_map['PCSCF']): |
| if p.get('pcscf'): |
| sw = self.update_pcscf(p['pcscf']) |
| else: |
| sw = self.update_pcscf("") |
| if sw != '9000': |
| print("Programming P-CSCF failed with code %s" % sw) |
| |
| # update EF.DOMAIN in ADF.ISIM |
| if self.file_exists(EF_ISIM_ADF_map['DOMAIN']): |
| if p.get('ims_hdomain'): |
| sw = self.update_domain(domain=p['ims_hdomain']) |
| else: |
| sw = self.update_domain() |
| |
| if sw != '9000': |
| print( |
| "Programming Home Network Domain Name failed with code %s" % sw) |
| |
| # update EF.IMPI in ADF.ISIM |
| # TODO: Validate IMPI input |
| if self.file_exists(EF_ISIM_ADF_map['IMPI']): |
| if p.get('impi'): |
| sw = self.update_impi(p['impi']) |
| else: |
| sw = self.update_impi() |
| if sw != '9000': |
| print("Programming IMPI failed with code %s" % sw) |
| |
| # update EF.IMPU in ADF.ISIM |
| # TODO: Validate IMPU input |
| # Support multiple IMPU if there is enough space |
| if self.file_exists(EF_ISIM_ADF_map['IMPU']): |
| if p.get('impu'): |
| sw = self.update_impu(p['impu']) |
| else: |
| sw = self.update_impu() |
| if sw != '9000': |
| print("Programming IMPU failed with code %s" % sw) |
| |
| if self.adf_present("usim"): |
| self.select_adf_by_aid(adf="usim") |
| |
| # EF.AD in ADF.USIM |
| if (p.get('mcc') and p.get('mnc')) or p.get('opmode'): |
| if p.get('mcc') and p.get('mnc'): |
| mnc = p['mnc'] |
| else: |
| mnc = None |
| sw = self.update_ad(mnc=mnc, opmode=p.get('opmode'), |
| path=EF_USIM_ADF_map['AD']) |
| if sw != '9000': |
| print("Programming AD failed with code %s" % sw) |
| |
| # update EF-USIM_AUTH_KEY in ADF.USIM |
| if p.get('ki'): |
| self._scc.update_binary('af20', p['ki'], 1) |
| if p.get('opc'): |
| self._scc.update_binary('af20', p['opc'], 17) |
| |
| # update EF.EHPLMN in ADF.USIM |
| if self.file_exists(EF_USIM_ADF_map['EHPLMN']): |
| if p.get('mcc') and p.get('mnc'): |
| sw = self.update_ehplmn(p['mcc'], p['mnc']) |
| if sw != '9000': |
| print("Programming EHPLMN failed with code %s" % sw) |
| |
| # update EF.ePDGId in ADF.USIM |
| if self.file_exists(EF_USIM_ADF_map['ePDGId']): |
| if p.get('epdgid'): |
| sw = self.update_epdgid(p['epdgid']) |
| else: |
| sw = self.update_epdgid("") |
| if sw != '9000': |
| print("Programming ePDGId failed with code %s" % sw) |
| |
| # update EF.ePDGSelection in ADF.USIM |
| if self.file_exists(EF_USIM_ADF_map['ePDGSelection']): |
| if p.get('epdgSelection'): |
| epdg_plmn = p['epdgSelection'] |
| sw = self.update_ePDGSelection( |
| epdg_plmn[:3], epdg_plmn[3:]) |
| else: |
| sw = self.update_ePDGSelection("", "") |
| if sw != '9000': |
| print("Programming ePDGSelection failed with code %s" % sw) |
| |
| # After successfully programming EF.ePDGId and EF.ePDGSelection, |
| # Set service 106 and 107 as available in EF.UST |
| # Disable service 95, 99, 115 if ISIM application is present |
| if self.file_exists(EF_USIM_ADF_map['UST']): |
| if p.get('epdgSelection') and p.get('epdgid'): |
| sw = self.update_ust(106, 1) |
| if sw != '9000': |
| print("Programming UST failed with code %s" % sw) |
| sw = self.update_ust(107, 1) |
| if sw != '9000': |
| print("Programming UST failed with code %s" % sw) |
| |
| sw = self.update_ust(95, 0) |
| if sw != '9000': |
| print("Programming UST failed with code %s" % sw) |
| sw = self.update_ust(99, 0) |
| if sw != '9000': |
| print("Programming UST failed with code %s" % sw) |
| sw = self.update_ust(115, 0) |
| if sw != '9000': |
| print("Programming UST failed with code %s" % sw) |
| |
| return |
| |
| class SysmoISIMSJA5(SysmoISIMSJA2): |
| """ |
| sysmocom sysmoISIM-SJA5 |
| """ |
| |
| name = 'sysmoISIM-SJA5' |
| |
| @classmethod |
| def autodetect(kls, scc): |
| try: |
| # Try card model #1 (9FJ) |
| atr = "3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 35 75 30 35 02 51 CC" |
| if scc.get_atr() == toBytes(atr): |
| return kls(scc) |
| # Try card model #2 (SLM17) |
| atr = "3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 35 75 30 35 02 65 F8" |
| if scc.get_atr() == toBytes(atr): |
| return kls(scc) |
| # Try card model #3 (9FV) |
| atr = "3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 35 75 30 35 02 59 C4" |
| if scc.get_atr() == toBytes(atr): |
| return kls(scc) |
| except: |
| return None |
| return None |
| |
| |
| class GialerSim(UsimCard): |
| """ |
| Gialer sim cards (www.gialer.com). |
| """ |
| name = 'gialersim' |
| |
| def __init__(self, ssc): |
| super().__init__(ssc) |
| self._program_handlers = { |
| 'iccid': self.update_iccid, |
| 'imsi': self.update_imsi, |
| 'acc': self.update_acc, |
| 'smsp': self.update_smsp, |
| 'ki': self.update_ki, |
| 'opc': self.update_opc, |
| 'fplmn': self.update_fplmn, |
| } |
| |
| @classmethod |
| def autodetect(cls, scc): |
| try: |
| # Look for ATR |
| if scc.get_atr() == toBytes('3B 9F 95 80 1F C7 80 31 A0 73 B6 A1 00 67 CF 32 15 CA 9C D7 09 20'): |
| return cls(scc) |
| except: |
| return None |
| return None |
| |
| def program(self, p): |
| self.set_apdu_parameter('00', '0004') |
| # Authenticate |
| self._scc.verify_chv(0xc, h2b('3834373936313533')) |
| for handler in self._program_handlers: |
| if p.get(handler) is not None: |
| self._program_handlers[handler](p[handler]) |
| |
| mcc = p.get('mcc') |
| mnc = p.get('mnc') |
| has_plmn = mcc is not None and mnc is not None |
| # EF.HPLMN |
| if has_plmn: |
| self.update_hplmn_act(mcc, mnc) |
| |
| # EF.AD |
| if has_plmn or (p.get('opmode') is not None): |
| self.update_ad(mnc=mnc, opmode=p.get('opmode')) |
| |
| def update_smsp(self, smsp): |
| data, sw = self._scc.update_record(EF['SMSP'], 1, rpad(smsp, 80)) |
| return sw |
| |
| def update_ki(self, ki): |
| self._scc.select_path(['3f00', '0001']) |
| self._scc.update_binary('0001', ki) |
| |
| def update_opc(self, opc): |
| self._scc.select_path(['3f00', '6002']) |
| # No idea why the '01' is required |
| self._scc.update_binary('6002', '01' + opc) |
| |
| |
| # In order for autodetection ... |
| _cards_classes = [FakeMagicSim, SuperSim, MagicSim, GrcardSim, |
| SysmoSIMgr1, SysmoSIMgr2, SysmoUSIMgr1, SysmoUSIMSJS1, |
| FairwavesSIM, OpenCellsSim, WavemobileSim, SysmoISIMSJA2, |
| SysmoISIMSJA5, GialerSim] |
| |
| |
| def card_detect(ctype, scc): |
| # Detect type if needed |
| card = None |
| ctypes = dict([(kls.name, kls) for kls in _cards_classes]) |
| |
| if ctype == "auto": |
| for kls in _cards_classes: |
| card = kls.autodetect(scc) |
| if card: |
| print("Autodetected card type: %s" % card.name) |
| card.reset() |
| break |
| |
| if card is None: |
| print("Autodetection failed") |
| return None |
| |
| elif ctype in ctypes: |
| card = ctypes[ctype](scc) |
| |
| else: |
| raise ValueError("Unknown card type: %s" % ctype) |
| |
| return card |