| module BSC_Tests { |
| |
| /* Integration Tests for OsmoBSC |
| * (C) 2017-2018 by Harald Welte <laforge@gnumonks.org> |
| * All rights reserved. |
| * |
| * Released under the terms of GNU General Public License, Version 2 or |
| * (at your option) any later version. |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| * |
| * This test suite tests OsmoBSC while emulating both multiple BTS + MS as |
| * well as the MSC. See README for more details. |
| * |
| * There are test cases that run in so-called 'handler mode' and test cases |
| * that run directly on top of the BSSAP and RSL CodecPorts. The "handler mode" |
| * tests abstract the multiplexing/demultiplexing of multiple SCCP connections |
| * and/or RSL channels and are hence suitable for higher-level test cases, while |
| * the "raw" tests directly on top of the CodecPorts are more suitable for lower- |
| * level testing. |
| */ |
| |
| friend module BSC_Tests_VAMOS; |
| friend module BSC_Tests_CBSP; |
| |
| import from Misc_Helpers all; |
| import from General_Types all; |
| import from Osmocom_Types all; |
| import from GSM_Types all; |
| import from IPL4asp_Types all; |
| |
| import from BSSAP_Types all; |
| import from RAN_Adapter all; |
| import from BSSAP_LE_Adapter all; |
| import from BSSAP_LE_CodecPort all; |
| import from BSSAP_LE_Types all; |
| import from BSSLAP_Types all; |
| import from BSSAP_CodecPort all; |
| import from BSSMAP_Templates all; |
| import from IPA_Emulation all; |
| import from IPA_CodecPort all; |
| import from IPA_Types all; |
| import from IPA_Testing all; |
| import from RSL_Types all; |
| import from RSL_Emulation all; |
| import from MGCP_Emulation all; |
| import from MGCP_Templates all; |
| import from MGCP_Types all; |
| import from MGCP_CodecPort all; |
| |
| import from Osmocom_CTRL_Functions all; |
| import from Osmocom_CTRL_Types all; |
| import from Osmocom_CTRL_Adapter all; |
| |
| import from StatsD_Types all; |
| import from StatsD_CodecPort all; |
| import from StatsD_CodecPort_CtrlFunct all; |
| import from StatsD_Checker all; |
| |
| import from Osmocom_VTY_Functions all; |
| import from TELNETasp_PortType all; |
| |
| import from MobileL3_CommonIE_Types all; |
| import from MobileL3_Types all; |
| import from MobileL3_RRM_Types all; |
| import from L3_Templates all; |
| import from GSM_RR_Types all; |
| |
| import from SCCP_Templates all; |
| import from BSSMAP_Templates all; |
| import from BSSMAP_LE_Templates all; |
| |
| import from SCCPasp_Types all; |
| |
| import from GSM_SystemInformation all; |
| import from GSM_RestOctets all; |
| import from TCCConversion_Functions all; |
| |
| const integer NUM_TRX := 4; |
| const integer NUM_BTS := 3; |
| const integer NUM_BTS_CFG := 4; /* we have 4 BTS in the osmo-bsc.cfg (for inter-BSC HO tests) but use only 3 */ |
| const integer NUM_TRX_CFG := 1; /* we support up to 4 TRX per BTS, but have only 1 TRX per BTS in osmo-bsc.cfg */ |
| const integer NUM_MSC := 3; |
| const integer NUM_MGW := 2; |
| const float T3101_MAX := 12.0; |
| |
| /* make sure to sync this with the osmo-bts.cfg you're using */ |
| const integer NUM_TCHH_PER_BTS := 2; |
| const integer NUM_TCHF_PER_BTS := 4; |
| const integer NUM_SDCCH_PER_BTS := 3; |
| |
| friend type record BtsTrxIdx { |
| uint8_t bts, |
| uint8_t trx |
| } |
| |
| private type record BtsParams { |
| integer trx_num, |
| integer tsc |
| } |
| |
| /* Default Training Sequence Code expected for bts[i]: |
| * BTS 0 has BSIC 10 (and no explicit timeslot training_sequence_code config), so expecting TSC = (BSIC & 7) = 2. |
| * BTS 1 has BSIC 11, TSC = (BSIC & 7) = 3. |
| * BTS 2 has BSIC 12, TSC = (BSIC & 7) = 4. |
| * BTS 2 has BSIC 12, TSC = (BSIC & 7) = 4. |
| */ |
| private const BtsParams c_BtsParams[NUM_BTS_CFG] := { |
| /* BTS0 */ { trx_num := 1, tsc := 2 }, |
| /* BTS1 */ { trx_num := 1, tsc := 3 }, |
| /* BTS2 */ { trx_num := 4, tsc := 4 }, |
| /* BTS3 */ { trx_num := 1, tsc := 4 } |
| } |
| |
| private const RSL_IE_Body c_mr_conf_5_90 := |
| valueof(RSL_IE_Body:{multirate_cfg := ts_RSL_MultirateCfg(true, 0, '00000100'B /* 5,90k */)}); |
| |
| /* per-BTS state which we keep */ |
| type record BTS_State { |
| /* component reference to the IPA_Client component used for RSL */ |
| IPA_Client rsl |
| } |
| |
| /* Default list of counters for an 'msc' entity. */ |
| const CounterNameVals counternames_msc_mscpool := { |
| { "mscpool:subscr:new", 0 }, |
| { "mscpool:subscr:known", 0 }, |
| { "mscpool:subscr:reattach", 0 }, |
| { "mscpool:subscr:attach_lost", 0 }, |
| { "mscpool:subscr:paged", 0 } |
| }; |
| |
| /* List of global mscpool counters, not related to a specific 'msc' entity. */ |
| const CounterNameVals counternames_bsc_mscpool := { |
| { "mscpool:subscr:no_msc", 0 } |
| }; |
| |
| /* Default list of counters for 'bsc' and 'bts' entities. */ |
| const CounterNameVals counternames_bsc_bts_handover := { |
| { "assignment:attempted", 0 }, |
| { "assignment:completed", 0 }, |
| { "assignment:stopped", 0 }, |
| { "assignment:no_channel", 0 }, |
| { "assignment:timeout", 0 }, |
| { "assignment:failed", 0 }, |
| { "assignment:error", 0 }, |
| |
| { "handover:attempted", 0 }, |
| { "handover:completed", 0 }, |
| { "handover:stopped", 0 }, |
| { "handover:no_channel", 0 }, |
| { "handover:timeout", 0 }, |
| { "handover:failed", 0 }, |
| { "handover:error", 0 }, |
| |
| { "intra_cell_ho:attempted", 0 }, |
| { "intra_cell_ho:completed", 0 }, |
| { "intra_cell_ho:stopped", 0 }, |
| { "intra_cell_ho:no_channel", 0 }, |
| { "intra_cell_ho:timeout", 0 }, |
| { "intra_cell_ho:failed", 0 }, |
| { "intra_cell_ho:error", 0 }, |
| |
| { "intra_bsc_ho:attempted", 0 }, |
| { "intra_bsc_ho:completed", 0 }, |
| { "intra_bsc_ho:stopped", 0 }, |
| { "intra_bsc_ho:no_channel", 0 }, |
| { "intra_bsc_ho:timeout", 0 }, |
| { "intra_bsc_ho:failed", 0 }, |
| { "intra_bsc_ho:error", 0 }, |
| |
| { "interbsc_ho_out:attempted", 0 }, |
| { "interbsc_ho_out:completed", 0 }, |
| { "interbsc_ho_out:stopped", 0 }, |
| { "interbsc_ho_out:timeout", 0 }, |
| { "interbsc_ho_out:failed", 0 }, |
| { "interbsc_ho_out:error", 0 }, |
| |
| { "interbsc_ho_in:attempted", 0 }, |
| { "interbsc_ho_in:completed", 0 }, |
| { "interbsc_ho_in:stopped", 0 }, |
| { "interbsc_ho_in:no_channel", 0 }, |
| { "interbsc_ho_in:timeout", 0 }, |
| { "interbsc_ho_in:failed", 0 }, |
| { "interbsc_ho_in:error", 0 } |
| }; |
| |
| const CounterNameVals counternames_bts_handover := { |
| { "incoming_intra_bsc_ho:attempted", 0 }, |
| { "incoming_intra_bsc_ho:completed", 0 }, |
| { "incoming_intra_bsc_ho:stopped", 0 }, |
| { "incoming_intra_bsc_ho:no_channel", 0 }, |
| { "incoming_intra_bsc_ho:timeout", 0 }, |
| { "incoming_intra_bsc_ho:failed", 0 }, |
| { "incoming_intra_bsc_ho:error", 0 } |
| }; |
| |
| /* Set of all System Information received during one RSL port's startup. |
| * Note that some System Information may be sent on RSL, but lacking actual SI data, to indicate that the BTS should not |
| * broadcast that SI type. That will be reflected as 'omit' here. |
| */ |
| type record SystemInformationConfig { |
| SystemInformationType1 si1 optional, |
| SystemInformationType2 si2 optional, |
| SystemInformationType2bis si2bis optional, |
| SystemInformationType2ter si2ter optional, |
| SI2quaterRestOctetsList si2quater optional, |
| SystemInformationType3 si3 optional, |
| SystemInformationType4 si4 optional, |
| SystemInformationType13 si13 optional, |
| SystemInformationType5 si5 optional, |
| SystemInformationType5bis si5bis optional, |
| SystemInformationType5ter si5ter optional, |
| SystemInformationType6 si6 optional |
| }; |
| |
| const SystemInformationConfig SystemInformationConfig_omit := { |
| si1 := omit, |
| si2 := omit, |
| si2bis := omit, |
| si2ter := omit, |
| si2quater := omit, |
| si3 := omit, |
| si4 := omit, |
| si13 := omit, |
| si5 := omit, |
| si5bis := omit, |
| si5ter := omit, |
| si6 := omit |
| }; |
| |
| /* tr_EUTRAN_CellDesc with defaults used in BSC_Tests.ttcn */ |
| template EUTRAN_CellDesc tr_EUTRAN_CellDesc_default(template (present) uint16_t e_arfcn := ?, |
| template uint3_t meas_bw := 3) |
| := tr_EUTRAN_CellDesc(e_arfcn := e_arfcn, |
| meas_bw_presence := '1'B, |
| meas_bw := meas_bw); |
| |
| /* tr_EUTRAN_NeighbourCells with defaults used in BSC_Tests.ttcn */ |
| template EUTRAN_NeighbourCells tr_EUTRAN_NeighbourCells_default(template (present) EUTRAN_CellDescs cell_desc_list := { tr_EUTRAN_CellDesc_default }, |
| template uint3_t prio := 3, |
| template (present) uint5_t thresh_high := 20, |
| template uint5_t thresh_low := 10, |
| template uint5_t qrxlevmin := 22) |
| := tr_EUTRAN_NeighbourCells( |
| cell_desc_list := cell_desc_list, |
| prio_presence := '1'B, |
| prio := prio, |
| thresh_high := thresh_high, |
| thresh_low_presence := '1'B, |
| thresh_low := thresh_low, |
| qrxlevmin_presence := '1'B, |
| qrxlevmin := qrxlevmin); |
| |
| template SystemInformationConfig SystemInformationConfig_default := { |
| si1 := { |
| cell_chan_desc := '8FB38000000000000000000000000000'O, |
| rach_control := { |
| max_retrans := RACH_MAX_RETRANS_7, |
| tx_integer := '1001'B, |
| cell_barr_access := false, |
| re_not_allowed := true, |
| acc := '0000010000000000'B |
| }, |
| rest_octets := ? |
| }, |
| si2 := { |
| bcch_freq_list := '00000000000000000000000000000000'O, |
| ncc_permitted := '11111111'B, |
| rach_control := { |
| max_retrans := RACH_MAX_RETRANS_7, |
| tx_integer := '1001'B, |
| cell_barr_access := false, |
| re_not_allowed := true, |
| acc := '0000010000000000'B |
| } |
| }, |
| si2bis := omit, |
| si2ter := { |
| extd_bcch_freq_list := '8E320000000000000000000000000800'O, |
| rest_octets := ? |
| }, |
| si2quater := { |
| tr_SI2quaterRestOctets_EUTRAN( repeated_neigh_cells := { tr_EUTRAN_NeighbourCells_default } ) |
| }, |
| si3 := { |
| cell_id := 0, |
| lai := { |
| mcc_mnc := '001F01'H, |
| lac := 1 |
| }, |
| ctrl_chan_desc := { |
| msc_r99 := true, |
| att := true, |
| bs_ag_blks_res := 1, |
| ccch_conf := CCHAN_DESC_1CCCH_COMBINED, |
| si22ind := false, |
| cbq3 := CBQ3_IU_MODE_NOT_SUPPORTED, |
| spare := '00'B, |
| bs_pa_mfrms := 3, |
| t3212 := 30 |
| }, |
| cell_options := { |
| dn_ind := false, |
| pwrc := false, |
| dtx := MS_SHALL_USE_UL_DTX, |
| radio_link_tout_div4 := 7 |
| }, |
| cell_sel_par := { |
| cell_resel_hyst_2dB := 2, |
| ms_txpwr_max_cch := 7, |
| acs := '0'B, |
| neci := true, |
| rxlev_access_min := 0 |
| }, |
| rach_control := { |
| max_retrans := RACH_MAX_RETRANS_7, |
| tx_integer := '1001'B, |
| cell_barr_access := false, |
| re_not_allowed := true, |
| acc := '0000010000000000'B |
| }, |
| rest_octets := { |
| sel_params := { |
| presence := '0'B, |
| params := omit |
| }, |
| pwr_offset := { |
| presence := '0'B, |
| offset := omit |
| }, |
| si_2ter_ind := '1'B, |
| early_cm_ind := '0'B, |
| sched_where := { |
| presence := '0'B, |
| where := omit |
| }, |
| gprs_ind := { |
| presence := '1'B, |
| ind := { |
| ra_colour := 0, |
| si13_pos := '0'B |
| } |
| }, |
| umts_early_cm_ind := '1'B, |
| si2_quater_ind := { |
| presence := '1'B, |
| ind := '0'B |
| }, |
| iu_mode_ind := omit, |
| si21_ind := { |
| presence := '0'B, |
| pos := omit |
| } |
| } |
| }, |
| si4 := { |
| lai := { |
| mcc_mnc := '001F01'H, |
| lac := 1 |
| }, |
| cell_sel_par := { |
| cell_resel_hyst_2dB := 2, |
| ms_txpwr_max_cch := 7, |
| acs := '0'B, |
| neci := true, |
| rxlev_access_min := 0 |
| }, |
| rach_control := { |
| max_retrans := RACH_MAX_RETRANS_7, |
| tx_integer := '1001'B, |
| cell_barr_access := false, |
| re_not_allowed := true, |
| acc := '0000010000000000'B |
| }, |
| cbch_chan_desc := { |
| iei := '64'O, |
| v := { |
| chan_nr := { |
| u := { |
| sdcch4 := { |
| tag := '001'B, |
| sub_chan := 2 |
| } |
| }, |
| tn := 0 |
| }, |
| tsc := 2, |
| h := false, |
| arfcn := 871, |
| maio_hsn := omit |
| } |
| }, |
| cbch_mobile_alloc := omit, |
| rest_octets := { |
| sel_params := { |
| presence := '0'B, |
| params := omit |
| }, |
| pwr_offset := { |
| presence := '0'B, |
| offset := omit |
| }, |
| gprs_ind := { |
| presence := '1'B, |
| ind := { |
| ra_colour := 0, |
| si13_pos := '0'B |
| } |
| }, |
| s_presence := '0'B, |
| s := omit |
| } |
| }, |
| si13 := { |
| rest_octets := { |
| presence := '1'B, |
| bcch_change_mark := ?, |
| si_change_field := '0000'B, |
| presence2 := '0'B, |
| si13_change_mark := omit, |
| gprs_ma := omit, |
| zero := '0'B, /* PBCCH not present in cell */ |
| rac := 0, |
| spgc_ccch_sup := '0'B, |
| priority_access_thr := '110'B, |
| network_control_order := '00'B, |
| gprs_cell_opts := { |
| nmo := '01'B, |
| t3168 := '011'B, |
| t3192 := '010'B, |
| drx_timer_max := '011'B, |
| access_burst_type := '0'B, |
| control_ack_type := '1'B, |
| bs_cv_max := 15, |
| pan_presence := '1'B, |
| pan_dec := 1, |
| pan_inc := 1, |
| pan_max := '111'B, |
| ext_info_presence := ?, |
| ext_info_length := *, |
| ext_info := * |
| }, |
| gprs_pwr_ctrl_params := { |
| alpha := 0, |
| t_avg_w := '10000'B, |
| t_avg_t := '10000'B, |
| pc_meas_chan := '0'B, |
| n_avg_i := '1000'B |
| } |
| } |
| }, |
| si5 := { |
| bcch_freq_list := '10000000000000000000000000000000'O |
| }, |
| si5bis := omit, |
| si5ter := { |
| extd_bcch_freq_list := '9E050020000000000000000000000000'O |
| }, |
| si6 := { |
| cell_id := 0, |
| lai := { |
| mcc_mnc := '001F01'H, |
| lac := 1 |
| }, |
| cell_options := { |
| dtx_ext := '1'B, |
| pwrc := false, |
| dtx := '01'B, |
| radio_link_timeout := '0111'B |
| }, |
| ncc_permitted := '11111111'B, |
| rest_octets := { |
| pch_nch_info := ?, |
| vbs_vgcs_options := ?, |
| dtm_support := '0'B, |
| rac := omit, |
| max_lapdm := omit, |
| band_ind := '0'B /* C0 ARFCN indicates 1800 band */ |
| } |
| } |
| }; |
| |
| |
| /* List of all the System Information received on all RSL ports */ |
| type record of SystemInformationConfig SystemInformationConfig_list; |
| |
| function f_sysinfo_dec_raw(inout SystemInformationConfig si, RSL_Message rsl) |
| { |
| var RSL_IE_Body sysinfo_type_ie; |
| var RSL_IE_SysinfoType si_type; |
| var octetstring data; |
| |
| if (f_rsl_find_ie(rsl, RSL_IE_SYSINFO_TYPE, sysinfo_type_ie) == false) { |
| setverdict(fail, "Cannot find RSL_IE_SYSINFO_TYPE"); |
| mtc.stop; |
| } |
| si_type := sysinfo_type_ie.sysinfo_type; |
| |
| if (rsl.msg_type == RSL_MT_BCCH_INFO) { |
| var RSL_IE_Body bcch_ie; |
| if (f_rsl_find_ie(rsl, RSL_IE_FULL_BCCH_INFO, bcch_ie)) { |
| data := bcch_ie.other.payload; |
| } |
| } else if (rsl.msg_type == RSL_MT_SACCH_FILL) { |
| var RSL_IE_Body l3_ie; |
| if (f_rsl_find_ie(rsl, RSL_IE_L3_INFO, l3_ie)) { |
| data := l3_ie.l3_info.payload; |
| } |
| } else { |
| setverdict(fail, "Don't understand this System Information message"); |
| mtc.stop; |
| } |
| |
| var boolean handled := false; |
| |
| if (rsl.msg_type == RSL_MT_BCCH_INFO) { |
| handled := true; |
| |
| if (si_type == RSL_SYSTEM_INFO_1) { |
| if (not isbound(data)) { |
| si.si1 := omit; |
| } else { |
| si.si1 := dec_SystemInformation(data).payload.si1; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_2) { |
| if (not isbound(data)) { |
| si.si2 := omit; |
| } else { |
| si.si2 := dec_SystemInformation(data).payload.si2; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_2bis) { |
| if (not isbound(data)) { |
| si.si2bis := omit; |
| } else { |
| si.si2bis := dec_SystemInformation(data).payload.si2bis; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_2ter) { |
| if (not isbound(data)) { |
| si.si2ter := omit; |
| } else { |
| si.si2ter := dec_SystemInformation(data).payload.si2ter; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_2quater) { |
| if (not isbound(data)) { |
| si.si2quater := {}; |
| } else { |
| var SystemInformationType2quater decoded := dec_SystemInformation(data).payload.si2quater; |
| /* this is a *record* of SI2quaterRestOctets! (multiplexed) */ |
| si.si2quater[decoded.rest_octets.si2quater_index] := decoded.rest_octets; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_3) { |
| if (not isbound(data)) { |
| si.si3 := omit; |
| } else { |
| si.si3 := dec_SystemInformation(data).payload.si3; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_4) { |
| if (not isbound(data)) { |
| si.si4 := omit; |
| } else { |
| si.si4 := dec_SystemInformation(data).payload.si4; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_13) { |
| if (not isbound(data)) { |
| si.si13 := omit; |
| } else { |
| si.si13 := dec_SystemInformation(data).payload.si13; |
| } |
| } else { |
| handled := false; |
| } |
| } else if (rsl.msg_type == RSL_MT_SACCH_FILL) { |
| handled := true; |
| |
| if (si_type == RSL_SYSTEM_INFO_5) { |
| if (not isbound(data)) { |
| si.si5 := omit; |
| } else { |
| si.si5 := dec_SystemInformation(data).payload.si5; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_5bis) { |
| if (not isbound(data)) { |
| si.si5bis := omit; |
| } else { |
| si.si5bis := dec_SystemInformation(data).payload.si5bis; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_5ter) { |
| if (not isbound(data)) { |
| si.si5ter := omit; |
| } else { |
| si.si5ter := dec_SystemInformation(data).payload.si5ter; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_6) { |
| if (not isbound(data)) { |
| si.si6 := omit; |
| } else { |
| si.si6 := dec_SystemInformation(data).payload.si6; |
| } |
| } else { |
| handled := false; |
| } |
| } |
| |
| if (not handled) { |
| setverdict(fail, "Unexpected SI type in ", rsl.msg_type, " message: ", si_type); |
| } |
| } |
| |
| type component test_CT extends CTRL_Adapter_CT { |
| /* Array of per-BTS/TRX state */ |
| var BTS_State bts[NUM_BTS][NUM_TRX]; |
| /* RSL common Channel Port (for RSL_Emulation) */ |
| port RSL_CCHAN_PT RSL_CCHAN[NUM_BTS]; |
| /* array of per-BTS/TRX RSL test ports */ |
| port IPA_RSL_PT IPA_RSL[NUM_BTS][NUM_TRX]; |
| port IPA_CODEC_PT IPA; /* Required for compilation of TC_rsl_unknown_unit_id() */ |
| /* CTRL muxed over IPA in SCCPlite conn BSC<->MSC (or BSC-NAT) */ |
| port IPA_CTRL_PT SCCPLITE_IPA_CTRL; |
| /* Configure/manage IPA_Emulation per-BTS/TRX port: */ |
| port IPA_CFG_PT IPA_CFG_PORT[NUM_BTS][NUM_TRX]; |
| |
| var MGCP_Emulation_CT vc_MGCP[NUM_MGW]; |
| var integer g_nr_mgw; /* number of vc_MGCP to initialize */ |
| port TELNETasp_PT BSCVTY; |
| |
| /* StatsD */ |
| var StatsD_Checker_CT vc_STATSD; |
| |
| var RAN_Adapter g_bssap[NUM_MSC]; |
| var BSSAP_LE_Adapter g_bssap_le; |
| /* for old legacy-tests only */ |
| port BSSAP_CODEC_PT BSSAP; |
| port BSSAP_LE_CODEC_PT BSSAP_LE; |
| |
| /* are we initialized yet */ |
| var boolean g_initialized := false; |
| |
| /* Osmux is enabled through VTY */ |
| var boolean g_osmux_enabled_cn := false; |
| var boolean g_osmux_enabled_bts := false; |
| |
| /*Configure T(tias) over VTY, seconds */ |
| var integer g_bsc_sccp_timer_ias := 7 * 60; |
| /*Configure T(tiar) over VTY, seconds */ |
| var integer g_bsc_sccp_timer_iar := 15 * 60; |
| |
| /* global test case guard timer (actual timeout value is set in f_init()) */ |
| timer T_guard := 30.0; |
| |
| var CounterNameValsList g_ctr_msc; |
| var CounterNameValsList g_ctr_bsc; |
| var CounterNameValsList g_ctr_bts; |
| |
| /* System Information bytes as received during RSL startup, for each RSL[idx]. */ |
| var SystemInformationConfig_list g_system_information := {}; |
| } |
| |
| type record of charstring phys_chan_configs; |
| modulepar { |
| /* IP address at which the BSC can be reached */ |
| charstring mp_bsc_ip := "127.0.0.1"; |
| /* port number to which to establish the IPA OML connections */ |
| integer mp_bsc_oml_port := 3002; |
| /* port number to which to establish the IPA RSL connections */ |
| integer mp_bsc_rsl_port := 3003; |
| /* port number to which to establish the IPA CTRL connection */ |
| integer mp_bsc_ctrl_port := 4249; |
| /* port number to which to listen for STATSD metrics */ |
| integer mp_bsc_statsd_port := 8125; |
| /* IP address at which the test binds */ |
| charstring mp_test_ip := "127.0.0.1"; |
| |
| RAN_Configurations mp_bssap_cfg := { |
| { |
| transport := BSSAP_TRANSPORT_AoIP, |
| sccp_service_type := "mtp3_itu", |
| sctp_addr := { 23905, "127.0.0.1", 2905, "127.0.0.1" }, |
| own_pc := 185, /* 0.23.1 first MSC emulation */ |
| own_ssn := 254, |
| peer_pc := 187, /* 0.23.3 osmo-bsc */ |
| peer_ssn := 254, |
| sio := '83'O, |
| rctx := 1 |
| }, |
| { |
| transport := BSSAP_TRANSPORT_AoIP, |
| sccp_service_type := "mtp3_itu", |
| sctp_addr := { 23906, "127.0.0.1", 2905, "127.0.0.1" }, |
| own_pc := 2, /* 0.0.2 second MSC emulation */ |
| own_ssn := 254, |
| peer_pc := 187, /* 0.23.3 osmo-bsc */ |
| peer_ssn := 254, |
| sio := '83'O, |
| rctx := 2 |
| }, |
| { |
| transport := BSSAP_TRANSPORT_AoIP, |
| sccp_service_type := "mtp3_itu", |
| sctp_addr := { 23907, "127.0.0.1", 2905, "127.0.0.1" }, |
| own_pc := 3, /* 0.0.3 third MSC emulation */ |
| own_ssn := 254, |
| peer_pc := 187, /* 0.23.3 osmo-bsc */ |
| peer_ssn := 254, |
| sio := '83'O, |
| rctx := 3 |
| } |
| }; |
| |
| /* Must match per BTS config in osmo-bsc.cfg */ |
| phys_chan_configs phys_chan_config := { |
| "CCCH+SDCCH4+CBCH", |
| "TCH/F", |
| "TCH/F", |
| "TCH/F", |
| "TCH/F", |
| "TCH/H", |
| "PDCH", |
| "PDCH" |
| }; |
| |
| BSSAP_LE_Configuration mp_bssap_le_cfg := { |
| sccp_service_type := "mtp3_itu", |
| sctp_addr := { 23908, "127.0.0.1", 2905, "127.0.0.1" }, |
| own_pc := 190, /* 0.23.6 SMLC emulation */ |
| own_ssn := 252, /* SMLC side SSN */ |
| peer_pc := 187, /* 0.23.3 osmo-bsc */ |
| peer_ssn := 250, /* BSC side SSN */ |
| sio := '83'O, |
| rctx := 6 |
| }; |
| boolean mp_enable_lcs_tests := true; |
| |
| /* Value set in osmo-bsc.cfg "ms max power" */ |
| uint8_t mp_exp_ms_power_level := 7; |
| |
| /* Whether to check for memory leaks */ |
| boolean mp_verify_talloc_count := true; |
| } |
| |
| friend function f_gen_test_hdlr_pars(integer bssap_idx := 0) return TestHdlrParams { |
| |
| var TestHdlrParams pars := valueof(t_def_TestHdlrPars); |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| pars.aoip := true; |
| } else { |
| pars.aoip := false; |
| } |
| pars.exp_ms_power_level := mp_exp_ms_power_level; |
| pars.mscpool.bssap_idx := bssap_idx; |
| pars.expect_tsc := c_BtsParams[0].tsc; |
| pars.imsi := f_rnd_imsi('00101'H); |
| |
| log(testcasename(), ": using IMSI ", pars.imsi); |
| |
| return pars; |
| } |
| |
| /* Convenience functions for rate counters using g_ctr_msc. */ |
| |
| private function f_ctrs_msc_init(integer mscs_count := NUM_MSC, CounterNameVals counternames := counternames_msc_mscpool) runs on test_CT { |
| g_ctr_msc := f_counter_name_vals_get_n(IPA_CTRL, "msc", mscs_count, counternames); |
| log("initial msc rate counters: ", g_ctr_msc); |
| } |
| |
| private function f_ctrs_msc_add(integer msc_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_counter_name_vals_list_add(g_ctr_msc, msc_nr, countername, val); |
| } |
| |
| /* f_ctrs_msc_init(); |
| * f_do_thing(on_msc := 0); |
| * f_do_thing(on_msc := 0); |
| * f_do_other(on_msc := 1); |
| * f_ctrs_msc_add(0, "thing", 2); |
| * f_ctrs_msc_add(1, "other"); |
| * f_ctrs_msc_verify(); |
| */ |
| private function f_ctrs_msc_verify() runs on test_CT { |
| log("verifying msc rate counters: ", g_ctr_msc); |
| f_counter_name_vals_expect_n(IPA_CTRL, "msc", g_ctr_msc); |
| } |
| |
| /* convenience: f_ctrs_msc_add() and f_ctrs_msc_verify() in one call. |
| * f_ctrs_msc_init(); |
| * f_do_thing(on_msc := 0); |
| * f_do_thing(on_msc := 0); |
| * f_do_thing(on_msc := 0); |
| * f_ctrs_msc_expect(0, "thing", 3); |
| */ |
| private function f_ctrs_msc_expect(integer msc_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_ctrs_msc_add(msc_nr, countername, val); |
| f_ctrs_msc_verify(); |
| } |
| |
| /* Convenience functions for rate counters using g_ctr_bts, always also including g_ctr_bsc. */ |
| |
| private function f_ctrs_bts_init(integer bts_count := NUM_BTS, CounterNameVals counternames := counternames_bsc_bts_handover) runs on test_CT { |
| g_ctr_bts := f_counter_name_vals_get_n(IPA_CTRL, "bts", bts_count, counternames); |
| log("initial bts rate counters: ", g_ctr_bts); |
| } |
| |
| function f_ctrs_bsc_and_bts_init(integer bts_count := NUM_BTS, CounterNameVals counternames := counternames_bsc_bts_handover) runs on test_CT { |
| f_ctrs_bts_init(bts_count, counternames); |
| f_ctrs_bsc_init(counternames); |
| } |
| |
| private function f_ctrs_bsc_and_bts_handover_init(integer bts_count := NUM_BTS) runs on test_CT { |
| var CounterNameVals bts_names := counternames_bsc_bts_handover & counternames_bts_handover; |
| f_ctrs_bts_init(bts_count, bts_names); |
| f_ctrs_bsc_init(counternames_bsc_bts_handover); |
| } |
| |
| private function f_ctrs_bts_add(integer bts_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_counter_name_vals_list_add(g_ctr_bts, bts_nr, countername, val); |
| } |
| |
| private function f_ctrs_bsc_and_bts_add(integer bts_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_ctrs_bts_add(bts_nr, countername, val); |
| f_ctrs_bsc_add(countername, val); |
| } |
| |
| function f_ctrs_bts_verify() runs on test_CT { |
| f_counter_name_vals_expect_n(IPA_CTRL, "bts", g_ctr_bts); |
| } |
| |
| /* f_ctrs_bsc_and_bts_init(); |
| * f_do_thing(on_bts := 0); |
| * f_do_thing(on_bts := 0); |
| * f_do_other(on_bts := 1); |
| * f_ctrs_bsc_and_bts_add(0, "thing", 2); |
| * f_ctrs_bsc_and_bts_add(1, "other"); |
| * f_ctrs_bsc_and_bts_verify(); |
| */ |
| private function f_ctrs_bsc_and_bts_verify() runs on test_CT { |
| f_ctrs_bts_verify(); |
| f_ctrs_bsc_verify(); |
| } |
| |
| /* convenience: f_ctrs_bsc_and_bts_add() and f_ctrs_bsc_and_bts_verify() in one call. |
| * f_ctrs_bsc_and_bts_init(); |
| * f_do_thing(on_bts := 0); |
| * f_do_thing(on_bts := 0); |
| * f_do_thing(on_bts := 0); |
| * f_ctrs_bsc_and_bts_expect(0, "thing", 3); |
| */ |
| private function f_ctrs_bsc_and_bts_expect(integer bts_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_ctrs_bsc_and_bts_add(bts_nr, countername, val); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| |
| /* Convenience functions for rate counters using g_ctr_bsc. */ |
| |
| private function f_ctrs_bsc_init(CounterNameVals counternames := counternames_bsc_bts_handover) runs on test_CT { |
| g_ctr_bsc := f_counter_name_vals_get_n(IPA_CTRL, "bsc", 1, counternames); |
| log("initial bsc rate counters: ", g_ctr_bsc); |
| } |
| |
| private function f_ctrs_bsc_add(charstring countername, integer val := 1) runs on test_CT { |
| f_counter_name_vals_list_add(g_ctr_bsc, 0, countername, val); |
| } |
| |
| /* f_ctrs_bsc_init(); |
| * f_do_thing(); |
| * f_do_thing(); |
| * f_do_other(); |
| * f_ctrs_bsc_add("thing", 2); |
| * f_ctrs_bsc_add("other"); |
| * f_ctrs_bsc_verify(); |
| */ |
| private function f_ctrs_bsc_verify() runs on test_CT { |
| f_counter_name_vals_expect_n(IPA_CTRL, "bsc", g_ctr_bsc); |
| } |
| |
| /* convenience: f_ctrs_bsc_add() and f_ctrs_bsc_verify() in one call. |
| * f_ctrs_bsc_init(); |
| * f_do_thing(); |
| * f_ctrs_bsc_expect("thing", 1); |
| */ |
| private function f_ctrs_bsc_expect(charstring countername, integer val := 1) runs on test_CT { |
| f_ctrs_bsc_add(countername, val); |
| f_ctrs_bsc_verify(); |
| } |
| |
| |
| friend function f_shutdown_helper() runs on test_CT { |
| /* Run the subscr and conn leak test only when the VTY is initialized */ |
| if (BSCVTY.checkstate("Mapped") and mp_verify_talloc_count) { |
| f_verify_talloc_count(BSCVTY, {"struct bsc_subscr", "struct gsm_subscriber_connection"}); |
| } |
| |
| all component.stop; |
| setverdict(pass); |
| mtc.stop; |
| } |
| |
| private function f_legacy_bssap_reset(integer bssap_idx := 0) runs on test_CT { |
| var BSSAP_N_UNITDATA_ind ud_ind; |
| var boolean reset_received := false; |
| timer T := 5.0; |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[bssap_idx].sccp_addr_peer, g_bssap[bssap_idx].sccp_addr_own, |
| ts_BSSMAP_Reset(0, g_osmux_enabled_cn))); |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(g_bssap[bssap_idx].sccp_addr_own, g_bssap[bssap_idx].sccp_addr_peer, |
| tr_BSSMAP_ResetAck(g_osmux_enabled_cn))) { |
| log("BSSMAP: Received RESET-ACK in response to RESET, we're ready to go!"); |
| } |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(?, ?, tr_BSSMAP_Reset(g_osmux_enabled_cn))) -> value ud_ind { |
| log("BSSMAP: Respoding to inbound RESET with RESET-ACK"); |
| BSSAP.send(ts_BSSAP_UNITDATA_req(ud_ind.callingAddress, ud_ind.calledAddress, |
| ts_BSSMAP_ResetAck(g_osmux_enabled_cn))); |
| reset_received := true; |
| repeat; |
| } |
| [] BSSAP.receive { repeat; } |
| [] T.timeout { |
| log("BSSMAP: Timeout waiting for RESET-ACK after sending RESET"); |
| /* If we received a RESET after ours was sent, it |
| may be a race condition where the other peer beacame |
| available after we sent it, but we are in a desired |
| state anyway, so go forward. */ |
| if (not reset_received) { |
| setverdict(fail); |
| } |
| } |
| } |
| } |
| |
| type record IPA_Client { |
| /* IPA Emulation component reference */ |
| IPA_Emulation_CT vc_IPA, |
| /* Unit-ID and other CCM parameters to use for IPA client emulation */ |
| IPA_CCM_Parameters ccm_pars, |
| /* String identifier for this IPA Client */ |
| charstring id, |
| /* Associated RSL Emulation Component (if any). Only used in "Handler mode" */ |
| RSL_Emulation_CT vc_RSL optional |
| } |
| |
| /*! Start the IPA/RSL related bits for one IPA_Client. |
| * \param clnt IPA_Client for which to establish |
| * \param bsc_host IP address / hostname of the BSC |
| * \param bsc_port TCP port number of the BSC |
| * \param idx BTS/TRX index values |
| * \param handler_mode Start an RSL_Emulation_CT component (true) or not (false) */ |
| function f_ipa_rsl_start(inout IPA_Client clnt, charstring bsc_host, PortNumber bsc_port, |
| BtsTrxIdx idx := {0, 0}, boolean handler_mode := false) |
| runs on test_CT { |
| timer T := 10.0; |
| |
| clnt.id := "IPA-BTS" & int2str(idx.bts) & "-TRX" & int2str(idx.trx) & "-RSL"; |
| clnt.vc_IPA := IPA_Emulation_CT.create(clnt.id & "-IPA") alive; |
| clnt.ccm_pars := c_IPA_default_ccm_pars; |
| clnt.ccm_pars.name := "Osmocom TTCN-3 BTS Simulator"; |
| clnt.ccm_pars.unit_id := int2str(1234 + idx.bts) & "/0/" & int2str(idx.trx); |
| if (handler_mode) { |
| clnt.vc_RSL := RSL_Emulation_CT.create(clnt.id & "-RSL") alive; |
| connect(clnt.vc_RSL:CCHAN_PT, self:RSL_CCHAN[idx.bts]); |
| } |
| |
| map(clnt.vc_IPA:IPA_PORT, system:IPA_CODEC_PT); |
| connect(clnt.vc_IPA:CFG_PORT, self:IPA_CFG_PORT[idx.bts][idx.trx]); |
| if (handler_mode) { |
| connect(clnt.vc_IPA:IPA_RSL_PORT, clnt.vc_RSL:IPA_PT); |
| } else { |
| connect(clnt.vc_IPA:IPA_RSL_PORT, self:IPA_RSL[idx.bts][idx.trx]); |
| } |
| |
| var integer local_port := 10000 + idx.bts * 1000 + idx.trx; |
| clnt.vc_IPA.start(IPA_Emulation.main_client(bsc_host, bsc_port, "", local_port, clnt.ccm_pars)); |
| if (handler_mode) { |
| clnt.vc_RSL.start(RSL_Emulation.main()); |
| return; |
| } |
| |
| /* wait for IPA RSL link to connect and send ID ACK */ |
| T.start; |
| alt { |
| [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_IPA_EV(ASP_IPA_EVENT_ID_ACK)) { |
| T.stop; |
| } |
| [] IPA_RSL[idx.bts][idx.trx].receive(ASP_IPA_Event:?) { repeat } |
| [] IPA_RSL[idx.bts][idx.trx].receive { repeat } |
| [] T.timeout { |
| setverdict(fail, "Timeout RSL waiting for ASP_IPA_EVENT_ID_ACK"); |
| mtc.stop; |
| } |
| } |
| } |
| |
| function f_ipa_rsl_stop(inout IPA_Client clnt, BtsTrxIdx idx := {0, 0}) runs on test_CT { |
| var IPL4asp_Types.Result res := { |
| errorCode := omit, |
| connId := omit, |
| os_error_code := omit, |
| os_error_text := omit |
| }; |
| |
| if (not isbound(clnt) or not isbound(clnt.vc_IPA)) { |
| return; |
| } |
| |
| /* Alive components don't finish sockets (TCP FIN) when they are |
| * stopped. Hence, we need to manually call close() on them to make sure |
| * the IUT knows about it. */ |
| f_ipa_cfg_disconnect(IPA_CFG_PORT[idx.bts][idx.trx], res); |
| |
| clnt.vc_IPA.stop; |
| if (isbound(clnt.vc_RSL)) { |
| clnt.vc_RSL.stop; |
| } |
| } |
| |
| /* Wait for the OML connection to be brought up by the external osmo-bts-omldummy */ |
| function f_wait_oml(integer bts_nr, charstring status, float secs_max) runs on test_CT { |
| timer T := secs_max; |
| T.start; |
| while (true) { |
| if (f_ctrl_get_bts(IPA_CTRL, bts_nr, "oml-connection-state") == status) { |
| T.stop; |
| /* the 'degraded' state exists from OML connection time, and we have to wait |
| * until all MO's are initialized */ |
| T.start(1.0); |
| T.timeout; |
| return; |
| } |
| f_sleep(0.1); |
| if (not T.running) { |
| setverdict(fail, "Timeout waiting for BTS" & int2str(bts_nr) & " oml-connection-state ", status); |
| mtc.stop; |
| } |
| } |
| } |
| |
| /* global altstep for global guard timer; also takes care of responding RESET witH RESET-ACK */ |
| altstep as_Tguard() runs on test_CT { |
| var BSSAP_N_UNITDATA_ind ud_ind; |
| [] T_guard.timeout { |
| setverdict(fail, "Timeout of T_guard"); |
| mtc.stop; |
| } |
| /* always respond with RESET ACK to RESET */ |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(?, ?, tr_BSSMAP_Reset(g_osmux_enabled_cn))) -> value ud_ind { |
| BSSAP.send(ts_BSSAP_UNITDATA_req(ud_ind.callingAddress, ud_ind.calledAddress, |
| ts_BSSMAP_ResetAck(g_osmux_enabled_cn))); |
| repeat; |
| } |
| } |
| |
| altstep no_bssmap_reset() runs on test_CT { |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(?, ?, tr_BSSMAP_Reset(g_osmux_enabled_cn))) { |
| setverdict(fail, "unexpected BSSMAP Reset"); |
| mtc.stop; |
| } |
| } |
| |
| function f_init_mgcp(integer mgw_nr, charstring id) runs on test_CT { |
| id := id & "-MGCP-" & int2str(mgw_nr); |
| |
| var MGCPOps ops := { |
| create_cb := refers(MGCP_Emulation.ExpectedCreateCallback), |
| unitdata_cb := refers(MGCP_Emulation.DummyUnitdataCallback) |
| }; |
| var MGCP_conn_parameters mgcp_pars := { |
| callagent_ip := mp_bsc_ip, |
| callagent_udp_port := -1, |
| mgw_ip := mp_test_ip, |
| mgw_udp_port := 2427 + mgw_nr, |
| /* Enable it for SCCPlite, since we have 2 MGCP sockets towards MGW (UDP one + |
| the one with MGCP over IPA forwarded from MSC one) */ |
| multi_conn_mode := (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_SCCPlite_SERVER) |
| }; |
| |
| vc_MGCP[mgw_nr] := MGCP_Emulation_CT.create(id) alive; |
| vc_MGCP[mgw_nr].start(MGCP_Emulation.main(ops, mgcp_pars, id)); |
| } |
| |
| /* Enable or disable (current default) Osmux. When enabling, BSSMAP Reset |
| * contains extra IE (OsmuxSupport) and osmo-bsc will handle AssignReq with |
| * OsmuxCID IE. |
| */ |
| private function f_vty_allow_osmux_cn(boolean allow) runs on test_CT { |
| f_vty_enter_cfg_msc(BSCVTY, 0); |
| if (allow) { |
| f_vty_transceive(BSCVTY, "osmux on"); |
| } else { |
| f_vty_transceive(BSCVTY, "osmux off"); |
| } |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| function f_init_vty(charstring id := "foo") runs on test_CT { |
| if (BSCVTY.checkstate("Mapped")) { |
| /* skip initialization if already executed once */ |
| return; |
| } |
| map(self:BSCVTY, system:BSCVTY); |
| f_vty_set_prompts(BSCVTY); |
| f_vty_transceive(BSCVTY, "enable"); |
| f_cs7_inst_0_cfg(BSCVTY, {"sccp-timer ias " & int2str(g_bsc_sccp_timer_ias), |
| "sccp-timer iar " & int2str(g_bsc_sccp_timer_iar)}); |
| } |
| |
| friend function f_logp(TELNETasp_PT pt, charstring log_msg) |
| { |
| // log on TTCN3 log output |
| log(log_msg); |
| // log in stderr log |
| if (pt.checkstate("Mapped")) { |
| f_vty_transceive(pt, "logp lglobal notice TTCN3 f_logp(): " & log_msg); |
| } |
| } |
| |
| private function f_sysinfo_seen(integer rsl_idx, RSL_Message rsl) runs on test_CT |
| { |
| if (rsl_idx >= lengthof(g_system_information)) { |
| g_system_information[rsl_idx] := SystemInformationConfig_omit |
| } |
| f_sysinfo_dec_raw(g_system_information[rsl_idx], rsl); |
| } |
| |
| altstep as_catch_RSL_sysinfo(integer rsl_idx) runs on test_CT { |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| |
| /* For handler_mode := false, receiving the RSL bootstrap messages directly on IPA_RSL */ |
| [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_NO_BCCH_INFO)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_NO_SACCH_FILL)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_SACCH_FILL)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| |
| /* For handler_mode := true, receiving the RSL bootstrap messages via RSL_Emulation */ |
| [] RSL_CCHAN[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_NO_BCCH_INFO)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] RSL_CCHAN[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] RSL_CCHAN[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_NO_SACCH_FILL)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] RSL_CCHAN[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_SACCH_FILL)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| } |
| |
| /* TODO: use BooleanList from COMMON/src/General_Types.ttcn */ |
| private type record of boolean my_BooleanList; |
| |
| private function f_vty_msc_allow_attach(TELNETasp_PT pt, my_BooleanList allow_attach_list) |
| { |
| var charstring config := f_vty_transceive_ret(pt, "show running-config"); |
| |
| for (var integer msc_nr := 0; msc_nr < sizeof(allow_attach_list); msc_nr := msc_nr+1) { |
| if (f_strstr(config, "\nmsc " & int2str(msc_nr) & "\n") < 0) { |
| /* There is no 'msc N' for this msc_nr in the running config, so don't create an empty msc by |
| * stepping into that config node. */ |
| log("msc ", msc_nr, " is not configured, skipping"); |
| continue; |
| } |
| f_vty_enter_cfg_msc(pt, msc_nr); |
| if (allow_attach_list[msc_nr]) { |
| /* strict := false: ignore if osmo-bsc does not support this config option (latest build) */ |
| f_vty_transceive(pt, "allow-attach", strict := false); |
| } else { |
| f_vty_transceive(pt, "no allow-attach", strict := false); |
| } |
| f_vty_transceive(pt, "exit"); |
| f_vty_transceive(pt, "exit"); |
| } |
| } |
| |
| /* global initialization function |
| * \param nr_bts Number of BTSs we should start/bring up |
| * \param handler_mode Start an RSL_Emulation_CT component (true) or not (false). |
| * \param nr_msc Number of virtual MSCs to bring up to connect to osmo-bsc. |
| */ |
| function f_init(integer nr_bts := NUM_BTS, boolean handler_mode := false, |
| integer nr_msc := 1, integer nr_mgw := 1, float guard_timeout := 30.0) runs on test_CT { |
| var integer bssap_idx; |
| |
| if (g_initialized) { |
| return; |
| } |
| g_initialized := true; |
| |
| T_guard.start(guard_timeout); |
| activate(as_Tguard()); |
| |
| f_init_vty("VirtMSC"); |
| f_vty_allow_osmux_cn(g_osmux_enabled_cn); |
| |
| var my_BooleanList allow_attach := { false, false, false }; |
| f_init_statsd("VirtMSC", vc_STATSD, mp_test_ip, mp_bsc_statsd_port); |
| |
| /* Make sure each MSC's internal state is "DISCONNECTED" at first */ |
| for (bssap_idx := 0; bssap_idx < NUM_MSC; bssap_idx := bssap_idx+1) { |
| f_vty_transceive(BSCVTY, "msc " & int2str(bssap_idx) & " bssmap reset", strict := false); |
| } |
| |
| for (bssap_idx := 0; bssap_idx < nr_msc; bssap_idx := bssap_idx+1) { |
| allow_attach[bssap_idx] := true; |
| /* Call a function of our 'parent component' RAN_Adapter_CT to start the |
| * MSC-side BSSAP emulation */ |
| if (handler_mode) { |
| var RanOps ranops := MSC_RanOps; |
| ranops.use_osmux := g_osmux_enabled_cn; |
| f_ran_adapter_init(g_bssap[bssap_idx], mp_bssap_cfg[bssap_idx], "VirtMSC", ranops); |
| connect(self:SCCPLITE_IPA_CTRL, g_bssap[bssap_idx].vc_RAN:CTRL_CLIENT); |
| f_ran_adapter_start(g_bssap[bssap_idx]); |
| } else { |
| f_ran_adapter_init(g_bssap[bssap_idx], mp_bssap_cfg[bssap_idx], "VirtMSC", omit); |
| connect(self:BSSAP, g_bssap[bssap_idx].vc_SCCP:SCCP_SP_PORT); |
| f_ran_adapter_start(g_bssap[bssap_idx]); |
| f_legacy_bssap_reset(); |
| } |
| } |
| |
| if (mp_enable_lcs_tests) { |
| if (handler_mode) { |
| f_bssap_le_adapter_init(g_bssap_le, mp_bssap_le_cfg, "VirtSMLC", SMLC_BssapLeOps); |
| } else { |
| f_bssap_le_adapter_init(g_bssap_le, mp_bssap_le_cfg, "VirtSMLC", omit); |
| connect(self:BSSAP_LE, g_bssap_le.vc_SCCP:SCCP_SP_PORT); |
| } |
| f_bssap_le_adapter_start(g_bssap_le); |
| } |
| |
| /* start the test with exactly all enabled MSCs allowed to attach */ |
| f_vty_msc_allow_attach(BSCVTY, allow_attach); |
| |
| f_ipa_ctrl_start_client(mp_bsc_ip, mp_bsc_ctrl_port); |
| |
| g_nr_mgw := nr_mgw; |
| for (var integer i := 0; i < g_nr_mgw; i := i+1) { |
| f_init_mgcp(i, "VirtMGW"); |
| } |
| |
| for (var integer i := 0; i < nr_bts; i := i+1) { |
| f_init_bts(i, c_BtsParams[i].trx_num, handler_mode); |
| } |
| |
| /* Emit a marker to appear in the SUT's own logging output */ |
| f_logp(BSCVTY, testcasename() & "() start"); |
| } |
| |
| function f_init_bts(integer bts_idx := 0, |
| integer trx_num := NUM_TRX_CFG, |
| boolean handler_mode := false) |
| runs on test_CT { |
| /* wait until osmo-bts-omldummy has respawned */ |
| f_wait_oml(bts_idx, "degraded", 5.0); |
| |
| /* start RSL connection(s) */ |
| for (var integer trx_idx := 0; trx_idx < trx_num; trx_idx := trx_idx + 1) { |
| f_ipa_rsl_start(bts[bts_idx][trx_idx].rsl, |
| mp_bsc_ip, mp_bsc_rsl_port, |
| {bts_idx, trx_idx}, handler_mode); |
| } |
| /* wait until BSC tells us "connected" */ |
| f_wait_oml(bts_idx, "connected", 5.0); |
| |
| /* Set up BTS with VTY commands: */ |
| if (Misc_Helpers.f_osmo_repo_is("nightly")) { |
| f_vty_enter_cfg_bts(BSCVTY, bts_idx); |
| if (g_osmux_enabled_bts) { |
| f_vty_transceive(BSCVTY, "osmux on"); |
| } else { |
| f_vty_transceive(BSCVTY, "osmux off"); |
| } |
| f_vty_transceive(BSCVTY, "end"); |
| } |
| } |
| |
| function f_init_bts_and_check_sysinfo(integer bts_idx := 0, |
| integer trx_num := NUM_TRX_CFG, |
| boolean handler_mode := false, |
| template SystemInformationConfig expect_si) |
| runs on test_CT { |
| var default sysinfo := activate(as_catch_RSL_sysinfo(bts_idx)); |
| |
| f_init_bts(bts_idx, trx_num, handler_mode); |
| |
| /* Give some time to (hopefully/most likely) collect all system informations from RSL startup. |
| * We could stop as soon as all expected SI are received, but then we might miss SI that we don't expect and |
| * that might be sent afterwards. So rather give a generous timeout and be quite sure to catch all SI. |
| */ |
| f_sleep(5.0); |
| log("RSL ", bts_idx, " SYSTEM INFORMATION: ", g_system_information[bts_idx]); |
| |
| deactivate(sysinfo); |
| |
| if (match(g_system_information[bts_idx], expect_si)) { |
| setverdict(pass); |
| } else { |
| log("RSL ", bts_idx, ": EXPECTED SI: ", expect_si); |
| log("RSL ", bts_idx, ": GOT SI: ", g_system_information[bts_idx]); |
| setverdict(fail, "received SI does not match expectations"); |
| return; |
| } |
| } |
| |
| /* expect to receive a RSL message matching a specified template on a given BTS / TRX */ |
| function f_exp_ipa_rx(template (present) RSL_Message t_rx, |
| BtsTrxIdx idx := {0, 0}, |
| float Tval := 2.0) |
| runs on test_CT return RSL_Message { |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| timer T := Tval; |
| |
| T.start; |
| alt { |
| [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(t_rx, ?)) -> value rx_rsl_ud { |
| T.stop; |
| } |
| [] IPA_RSL[idx.bts][idx.trx].receive { repeat; } |
| [] T.timeout { |
| setverdict(fail, "Timeout expecting ", t_rx); |
| mtc.stop; |
| } |
| } |
| return rx_rsl_ud.rsl; |
| } |
| |
| /* helper function to transmit RSL on a given BTS/stream */ |
| function f_ipa_tx(template (value) RSL_Message t_tx, |
| BtsTrxIdx idx := {0, 0}, |
| IpaStreamId sid := IPAC_PROTO_RSL_TRX0) |
| runs on test_CT { |
| IPA_RSL[idx.bts][idx.trx].send(ts_ASP_RSL_UD(t_tx, sid)); |
| } |
| |
| |
| /* verify we get a CHAN_ACT after CHAN RQD */ |
| testcase TC_chan_act_noreply() runs on test_CT { |
| var BSSAP_N_UNITDATA_ind ud_ind; |
| var RSL_Message rsl_unused; |
| |
| f_init(1); |
| |
| f_ipa_tx(ts_RSL_CHAN_RQD('23'O, 23)); |
| rsl_unused := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| f_shutdown_helper(); |
| } |
| |
| const CounterNameVals counternames_bts_chreq := { |
| { "chreq:total", 0 }, |
| { "chreq:attempted_emerg", 0 }, |
| { "chreq:attempted_call", 0 }, |
| { "chreq:attempted_location_upd", 0 }, |
| { "chreq:attempted_pag", 0 }, |
| { "chreq:attempted_pdch", 0 }, |
| { "chreq:attempted_other", 0 }, |
| { "chreq:attempted_unknown", 0 }, |
| { "chreq:successful", 0 }, |
| { "chreq:successful_emerg", 0 }, |
| { "chreq:successful_call", 0 }, |
| { "chreq:successful_location_upd", 0 }, |
| { "chreq:successful_pag", 0 }, |
| { "chreq:successful_pdch", 0 }, |
| { "chreq:successful_other", 0 }, |
| { "chreq:successful_unknown", 0 }, |
| { "chreq:no_channel", 0 }, |
| { "chreq:max_delay_exceeded", 0 } |
| }; |
| |
| /* verify the "chreq:*" counters */ |
| private function f_chan_act_counter(OCT1 ra, charstring chreq_ctr_suffix) runs on test_CT |
| { |
| var GsmFrameNumber fn := 23; |
| |
| f_logp(BSCVTY, "f_chan_act_counter(" & chreq_ctr_suffix & ")"); |
| |
| var RSL_Message rx_rsl; |
| f_ipa_tx(ts_RSL_CHAN_RQD(ra, fn)); |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| var RslChannelNr chan_nr := rx_rsl.ies[0].body.chan_nr; |
| |
| f_ctrs_bts_add(0, "chreq:total"); |
| f_ctrs_bts_add(0, "chreq:attempted_" & chreq_ctr_suffix); |
| f_ctrs_bts_verify(); |
| |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); |
| rx_rsl := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| |
| f_ctrs_bts_add(0, "chreq:successful"); |
| f_ctrs_bts_add(0, "chreq:successful_" & chreq_ctr_suffix); |
| f_ctrs_bts_verify(); |
| |
| /* test is done, release RSL Conn Fail Ind to clean up */ |
| f_ipa_tx(ts_RSL_CONN_FAIL_IND(chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), Tval := 10.0); |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(chan_nr)); |
| f_sleep(1.0); |
| } |
| |
| testcase TC_chan_act_counter() runs on test_CT { |
| var BSSAP_N_UNITDATA_ind ud_ind; |
| var integer chreq_total; |
| var RSL_Message rsl_unused; |
| |
| f_init(1); |
| |
| f_vty_allow_emerg_bts(true, 0); |
| |
| f_ctrs_bts_init(1, counternames_bts_chreq); |
| |
| /* emergency call: RA & 0xe0 == 0xa0 --> CHREQ_T_EMERG_CALL */ |
| f_chan_act_counter('a3'O, "emerg"); |
| |
| /* voice TCH/H: RA & 0xf0 == 0x40 --> CHREQ_T_VOICE_CALL_TCH_H */ |
| f_chan_act_counter('43'O, "call"); |
| |
| /* LU: RA & 0xf0 == 0x00 --> CHREQ_T_LOCATION_UPD */ |
| f_chan_act_counter('03'O, "location_upd"); |
| |
| /* Paging: RA & 0xf0 == 0x20 --> CHREQ_T_PAG_R_TCH_F */ |
| f_chan_act_counter('23'O, "pag"); |
| /* Paging: RA & 0xf0 == 0x30 --> CHREQ_T_PAG_R_TCH_FH */ |
| f_chan_act_counter('33'O, "pag"); |
| |
| /* LU: RA & 0xfc == 0x78 --> CHREQ_T_PDCH_TWO_PHASE */ |
| /* no PCU, so PDCH not allowed. Skip this test for now. */ |
| /* f_chan_act_counter('7b'O, "pdch"); */ |
| |
| /* LU: RA & 0xf0 == 0x10 --> CHREQ_T_SDCCH */ |
| f_chan_act_counter('13'O, "other"); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* CHAN RQD -> CHAN ACT -> CHAN ACT ACK -> RF CHAN REL */ |
| private function f_TC_chan_act_ack_noest(OCT1 ra := '23'O) runs on test_CT { |
| var RSL_Message rx_rsl; |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| var RslChannelNr chan_nr := f_chreq_act_ack(ra); |
| |
| /* expect BSC to disable the channel again if there's no RLL EST IND */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), Tval := T3101_MAX); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Normal variant */ |
| testcase TC_chan_act_ack_noest() runs on test_CT { |
| f_init(1); |
| f_TC_chan_act_ack_noest(); |
| } |
| |
| /* Emergency call variant */ |
| testcase TC_chan_act_ack_noest_emerg() runs on test_CT { |
| /* See also: 3GPP TS 04.08, Table 9.9, ra=101xxxxx */ |
| f_init(1); |
| f_vty_allow_emerg_bts(true, 0); |
| f_TC_chan_act_ack_noest(ra := 'A5'O); |
| } |
| |
| /* Emergency call variant, but emergency calls are not allowed */ |
| testcase TC_chan_rqd_emerg_deny() runs on test_CT { |
| /* See also: 3GPP TS 04.08, Table 9.9, ra=101xxxxx */ |
| |
| var RSL_Message rx_rsl; |
| var GsmRrMessage rr; |
| |
| f_init(1); |
| f_vty_allow_emerg_bts(false, 0); |
| |
| IPA_RSL[0][0].clear; |
| f_ipa_tx(ts_RSL_CHAN_RQD('A5'O, 23)); |
| |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeC(RSL_MT_IMMEDIATE_ASSIGN_CMD)); |
| rr := dec_GsmRrMessage(rx_rsl.ies[1].body.full_imm_ass_info.payload); |
| if (rr.header.message_type == IMMEDIATE_ASSIGNMENT_REJECT) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, "immediate assignment not rejected"); |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior if MSC never answers to CR */ |
| testcase TC_chan_act_ack_est_ind_noreply() runs on test_CT { |
| var RslLinkId main_dcch := valueof(ts_RslLinkID_DCCH(0)); |
| var IpaStreamId sid := IPAC_PROTO_RSL_TRX0; |
| var RSL_Message rx_rsl; |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| |
| f_init(1); |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| var RslChannelNr chan_nr := f_chreq_act_ack(); |
| |
| var octetstring l3 := '00010203040506'O |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))); |
| |
| /* expect BSC to disable the channel again if there's no response from MSC */ |
| /* MS waits 20s (T3210) at LU; 10s (T3230) at CM SERV REQ and 5s (T3220) AT detach */ |
| f_expect_chan_rel(chan_nr, expect_rll_rel_req := false); |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior if MSC answers with CREF to CR */ |
| testcase TC_chan_act_ack_est_ind_refused() runs on test_CT { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var RSL_Message rx_rsl; |
| |
| f_init(1); |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| var RslChannelNr chan_nr := f_chreq_act_ack(); |
| |
| var octetstring l3 := '00010203040506'O |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| BSSAP.send(ts_BSSAP_DISC_req(rx_c_ind.connectionId, 0)); |
| |
| /* expect BSC to disable the channel */ |
| f_expect_chan_rel(chan_nr, expect_rll_rel_req := false); |
| f_shutdown_helper(); |
| } |
| |
| /* CHAN RQD -> CHAN ACT -> CHAN ACT NACK -> RF CHAN REL */ |
| testcase TC_chan_act_nack() runs on test_CT { |
| var RSL_Message rx_rsl; |
| var integer chact_nack; |
| |
| f_init(1); |
| |
| chact_nack := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chan_act:nack"); |
| |
| f_ipa_tx(ts_RSL_CHAN_RQD('33'O, 33)); |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| var RslChannelNr chan_nr := rx_rsl.ies[0].body.chan_nr; |
| |
| f_ipa_tx(ts_RSL_CHAN_ACT_NACK(chan_nr, RSL_ERR_EQUIPMENT_FAIL)); |
| |
| /* wait for some time to hope the NACK arrives before the CTRL GET below */ |
| f_sleep(0.5); |
| |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chan_act:nack", chact_nack+1); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test for channel exhaustion due to RACH overload */ |
| testcase TC_chan_exhaustion() runs on test_CT { |
| var ASP_RSL_Unitdata rsl_ud; |
| var integer i; |
| var integer chreq_total, chreq_nochan; |
| |
| f_init(1); |
| |
| chreq_total := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total"); |
| chreq_nochan := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:no_channel"); |
| |
| /* GSM 44.018 Table 9.1.8.2: |
| * RA = '33'O -> Establishment cause = 0011xxxx (MS dual rate capable and asks for "TCH/H or TCH/F"). |
| * With current setup, expect 4xSDCCH + 4xTCH/F + 1xTCH/H to succeed */ |
| for (i := 0; i < NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS; i := i+1) { |
| var RslChannelNr chan_nr := f_chreq_act_ack('33'O, i); |
| } |
| |
| IPA_RSL[0][0].clear; |
| |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", |
| chreq_total + NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS); |
| |
| /* now expect additional channel activations to fail */ |
| f_ipa_tx(ts_RSL_CHAN_RQD('42'O, 42)); |
| |
| alt { |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV))) { |
| setverdict(fail, "Received CHAN ACT ACK without resources?!?"); |
| } |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_IMM_ASSIGN(?))) -> value rsl_ud { |
| var GsmRrMessage rr; |
| /* match on IMM ASS REJ */ |
| rr := dec_GsmRrMessage(rsl_ud.rsl.ies[1].body.full_imm_ass_info.payload); |
| if (rr.header.message_type == IMMEDIATE_ASSIGNMENT_REJECT) { |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", |
| chreq_total + NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS+1); |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:no_channel", |
| chreq_nochan+1); |
| setverdict(pass); |
| } else { |
| repeat; |
| } |
| } |
| [] IPA_RSL[0][0].receive { repeat; } |
| } |
| f_shutdown_helper(); |
| } |
| |
| /* Test channel deactivation due to silence from MS */ |
| testcase TC_chan_deact_silence() runs on test_CT { |
| var RslChannelNr chan_nr; |
| |
| f_init(1); |
| |
| /* Request for a dedicated channel */ |
| chan_nr := f_chreq_act_ack('23'O); |
| |
| /* Wait some time until the channel is released */ |
| f_sleep(2.0); |
| |
| /* Expect CHANnel RELease */ |
| alt { |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL))) { |
| log("Received CHANnel RELease"); |
| setverdict(pass); |
| } |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_IMM_ASSIGN(?))) { |
| /* See OS#3709, OsmoBSC should not send Immediate |
| * Assignment Reject since a dedicated channel was |
| * already allocated, and Immediate Assignment was |
| * already sent. */ |
| setverdict(fail, "Unexpected Immediate Assignment!"); |
| } |
| [] IPA_RSL[0][0].receive { |
| setverdict(fail, "Unexpected RSL message!"); |
| } |
| } |
| f_shutdown_helper(); |
| } |
| |
| /*********************************************************************** |
| * Assignment Testing |
| ***********************************************************************/ |
| |
| /* Verify that the BSC refuses any BSSAP connection from the MSC (They are all BSC->MSC direction, |
| * except for the inter-BSC handover, MT side) */ |
| testcase TC_outbound_connect(integer bssap_idx := 0) runs on test_CT { |
| f_init(1); |
| |
| BSSAP.send(ts_BSSAP_CONNECT_req(g_bssap[bssap_idx].sccp_addr_peer, g_bssap[bssap_idx].sccp_addr_own, |
| 2342, ts_BSSMAP_AssignmentReq)); |
| BSSAP.receive(tr_BSSAP_DISC_ind(2342, ?, ?)); |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior if MSC answers with CREF to CR */ |
| testcase TC_assignment_cic_only(integer bssap_idx := 0) runs on test_CT { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00000000'O); |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| /* send assignment without AoIP IEs */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_AssignmentReq(ts_BSSMAP_IE_CIC(0, 1)))); |
| } else { |
| /* Send assignmetn without CIC in IPA case */ |
| var BSSMAP_IE_AoIP_TransportLayerAddress tla := |
| valueof(ts_BSSMAP_IE_AoIP_TLA4('01020304'O, 2342)); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_AssignmentReq(omit, tla))); |
| } |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentComplete)) { |
| setverdict(fail, "AoIP BSC cannot accept ASSIGNMENT without AoIP Transport IE"); |
| } |
| /* TODO: Actually expect GSM0808_CAUSE_REQ_A_IF_TYPE_NOT_SUPP */ |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentFail)) { |
| setverdict(pass); |
| } |
| [] BSSAP.receive { repeat; } |
| } |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| /* generate an assignment request for either AoIP or SCCPlite */ |
| function f_gen_ass_req(boolean osmux_enabled := false, integer bssap_idx := 0, charstring aoip_tla := "1.2.3.4") return PDU_BSSAP { |
| var PDU_BSSAP ass_cmd; |
| var BSSMAP_IE_Osmo_OsmuxCID osmux_cid := valueof(ts_OsmuxCID(0)); |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| var BSSMAP_IE_AoIP_TransportLayerAddress tla := |
| valueof(f_ts_BSSMAP_IE_AoIP_TLA(aoip_tla, 2342)); |
| if (osmux_enabled) { |
| ass_cmd := valueof(ts_BSSMAP_AssignmentReq(omit, tla, osmux_cid)); |
| } else { |
| ass_cmd := valueof(ts_BSSMAP_AssignmentReq(omit, tla)); |
| } |
| } else { |
| var BSSMAP_IE_CircuitIdentityCode cic := valueof(ts_BSSMAP_IE_CIC(0,1)); |
| ass_cmd := valueof(ts_BSSMAP_AssignmentReq(cic, omit)); |
| } |
| return ass_cmd; |
| } |
| |
| function f_gen_handover_req(integer bssap_idx := 0, charstring aoip_tla := "1.2.3.4", |
| template (value) BSSMAP_IE_CellIdentifier cell_id_source := ts_CellID_LAC_CI(1, 1), |
| template (omit) BSSMAP_oldToNewBSSIEs oldToNewBSSIEs := omit, |
| template (omit) TestHdlrEncrParams enc := omit) return PDU_BSSAP { |
| var PDU_BSSAP ho_req; |
| |
| var BSSMAP_IE_EncryptionInformation encryptionInformation := |
| valueof(ts_BSSMAP_IE_EncrInfo('0000000000000000'O,'01'O)); |
| var template (omit) BSSMAP_IE_ChosenEncryptionAlgorithm chosenEncryptionAlgorithm := omit; |
| var template (omit) BSSMAP_IE_KC128 kc128 := omit; |
| if (ispresent(enc)) { |
| var TestHdlrEncrParams v_enc := valueof(enc); |
| encryptionInformation := valueof(ts_BSSMAP_IE_EncrInfo(v_enc.enc_key, v_enc.enc_alg_permitted)); |
| if (ispresent(v_enc.enc_alg_chosen)) { |
| chosenEncryptionAlgorithm := valueof( |
| ts_BSSMAP_IE_ChosenEncryptionAlgorithm(int2oct(enum2int( |
| f_cipher_mode_bssmap_to_rsl(v_enc.enc_alg_chosen)), 1))); |
| } |
| if (ispresent(v_enc.enc_kc128)) { |
| kc128 := ts_BSSMAP_IE_Kc128(v_enc.enc_kc128); |
| } |
| } |
| |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| var BSSMAP_IE_AoIP_TransportLayerAddress tla := |
| valueof(f_ts_BSSMAP_IE_AoIP_TLA(aoip_tla, 2342)); |
| ho_req := valueof(ts_BSSMAP_HandoverRequest(omit, tla, |
| cell_id_source := cell_id_source, |
| oldToNewBSSIEs := oldToNewBSSIEs, |
| encryptionInformation := encryptionInformation, |
| chosenEncryptionAlgorithm := chosenEncryptionAlgorithm, |
| kC128 := kc128, |
| /* on AoIP, allow "all" codecs (until we add more concise |
| * tests) */ |
| codecList := ts_BSSMAP_IE_CodecList( |
| {ts_CodecAMR_F, ts_CodecAMR_H, |
| ts_CodecEFR, ts_CodecFR, ts_CodecHR}))); |
| } else { |
| var BSSMAP_IE_CircuitIdentityCode cic := valueof(ts_BSSMAP_IE_CIC(0,1)); |
| ho_req := valueof(ts_BSSMAP_HandoverRequest(cic, omit, |
| cell_id_source := cell_id_source, |
| oldToNewBSSIEs := oldToNewBSSIEs, |
| encryptionInformation := encryptionInformation, |
| chosenEncryptionAlgorithm := chosenEncryptionAlgorithm, |
| kC128 := kc128)); |
| } |
| return ho_req; |
| } |
| |
| /* generate an assignment complete template for either AoIP or SCCPlite */ |
| function f_gen_exp_compl(integer bssap_idx := 0) |
| runs on MSC_ConnHdlr return template PDU_BSSAP { |
| var template PDU_BSSAP exp_compl; |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| var template BSSMAP_IE_Osmo_OsmuxCID exp_osmux_cid := omit; |
| if (g_pars.use_osmux_cn) { |
| var template (present) INT1 exp_cid := ?; |
| if (isbound(g_media.mgcp_conn[0].local_osmux_cid) and isbound(g_media.mgcp_conn[1].local_osmux_cid)) { |
| exp_cid := (g_media.mgcp_conn[0].local_osmux_cid, g_media.mgcp_conn[1].local_osmux_cid); |
| } else if (isbound(g_media.mgcp_conn[0].local_osmux_cid)) { |
| exp_cid := g_media.mgcp_conn[0].local_osmux_cid; |
| } else if (isbound(g_media.mgcp_conn[1].local_osmux_cid)) { |
| exp_cid := g_media.mgcp_conn[1].local_osmux_cid; |
| } |
| exp_osmux_cid := tr_OsmuxCID(exp_cid); |
| } |
| exp_compl := tr_BSSMAP_AssignmentComplete(omit, ?, exp_osmux_cid); |
| } else { |
| /* CIC is optional "*" as the MSC allocated it */ |
| exp_compl := tr_BSSMAP_AssignmentComplete(*, omit, omit); |
| } |
| return exp_compl; |
| } |
| |
| /* Run everything required up to sending a caller-specified assignment command and expect response */ |
| function f_assignment_exp(PDU_BSSAP ass_cmd, template PDU_BSSAP exp, charstring fail_text) |
| runs on test_CT return DchanTuple { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00000000'O); |
| /* send assignment without AoIP IEs */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ass_cmd)); |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentComplete)) { |
| if (ischosen(exp.pdu.bssmap.assignmentComplete)) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, fail_text); |
| } |
| } |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentFail)) { |
| if (ischosen(exp.pdu.bssmap.assignmentFailure)) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, fail_text); |
| } |
| } |
| [] BSSAP.receive { repeat; } |
| } |
| return dt; |
| } |
| testcase TC_assignment_csd() runs on test_CT { |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeCSD); |
| //exp_fail.pdu.bssmap.assignmentFailure.cause.causeValue := int2bit(enum2int(GSM0808_CAUSE_REQ_CODEC_TYPE_OR_CONFIG_UNAVAIL), 7); |
| var DchanTuple dt := f_assignment_exp(ass_cmd, exp_fail, "BSC accepted Assignment for CSD"); |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_ctm() runs on test_CT { |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeCTM); |
| //exp_fail.pdu.bssmap.assignmentFailure.cause.causeValue := int2bit(enum2int(GSM0808_CAUSE_REQ_CODEC_TYPE_OR_CONFIG_UNAVAIL), 7); |
| var DchanTuple dt := f_assignment_exp(ass_cmd, exp_fail, "BSC accepted Assignment for Speech+CTM"); |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| type record DchanTuple { |
| integer sccp_conn_id, |
| RslChannelNr rsl_chan_nr, |
| BtsTrxIdx idx |
| } |
| |
| type record of DchanTuple DchanTuples; |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| private function f_chreq_act_ack(OCT1 ra := '23'O, |
| GsmFrameNumber fn := 23, |
| BtsTrxIdx idx := {0, 0}) |
| runs on test_CT return RslChannelNr { |
| var RSL_Message rx_rsl; |
| f_ipa_tx(ts_RSL_CHAN_RQD(ra, fn), {idx.bts, 0}); |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV), idx); |
| var RslChannelNr chan_nr := rx_rsl.ies[0].body.chan_nr; |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10), idx); |
| rx_rsl := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0), {idx.bts, 0}); |
| return chan_nr; |
| } |
| |
| /* helper function to establish a dedicated channel via BTS and MSC */ |
| function f_est_dchan(OCT1 ra, GsmFrameNumber fn, octetstring l3, |
| BtsTrxIdx idx := {0, 0}) |
| runs on test_CT return DchanTuple { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var DchanTuple dt; |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| dt.rsl_chan_nr := f_chreq_act_ack(ra, fn, idx); |
| |
| f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3), idx); |
| |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); |
| |
| dt.idx := idx; |
| return dt; |
| } |
| |
| /* Like f_est_dchan(), but for the first lchan of a dynamic timeslot: first ACK the deactivation of PDCH. */ |
| function f_est_dchan_dyn(OCT1 ra, GsmFrameNumber fn, octetstring l3, |
| BtsTrxIdx idx := {0, 0}) |
| runs on test_CT return DchanTuple { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var DchanTuple dt; |
| |
| /* Send CHAN RQD */ |
| var RSL_Message rx_rsl; |
| f_ipa_tx(ts_RSL_CHAN_RQD(ra, fn), {idx.bts, 0}); |
| |
| /* The dyn TS first deactivates PDCH */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), idx, Tval := T3101_MAX); |
| dt.rsl_chan_nr := rx_rsl.ies[0].body.chan_nr; |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr), idx); |
| |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV), idx); |
| dt.rsl_chan_nr := rx_rsl.ies[0].body.chan_nr; |
| |
| /* Now activates the signalling channel */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, fn+10), idx); |
| rx_rsl := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0), {idx.bts, 0}); |
| |
| f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3), idx); |
| |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); |
| |
| dt.idx := idx; |
| return dt; |
| } |
| |
| /* expect RF CAN REL from BTS, acknowledge it and clear the MSC side */ |
| private function f_exp_chan_rel_and_clear(DchanTuple dt) |
| runs on test_CT { |
| var RSL_Message rx_rsl; |
| /* expect BSC to disable the channel */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), dt.idx, Tval := T3101_MAX); |
| /* respond with CHAN REL ACK */ |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr), dt.idx); |
| |
| /* expect Clear Complete from BSC */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)); |
| |
| /* MSC disconnects as instructed. */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| /* Test behavior of channel release after unilateral RLL REL IND (DISC from MS) */ |
| testcase TC_chan_rel_rll_rel_ind() runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* simulate RLL REL IND */ |
| f_ipa_tx(ts_RSL_REL_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); |
| |
| /* expect Clear Request on MSC side */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_di; |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := bit2int(rx_di.userData.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect BSC to disable the channel */ |
| f_exp_chan_rel_and_clear(dt); |
| |
| /* wait for SCCP emulation to do its job */ |
| f_sleep(1.0); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior of channel release after CONN FAIL IND from BTS */ |
| testcase TC_chan_rel_conn_fail() runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* simulate CONN FAIL IND */ |
| f_ipa_tx(ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| /* TODO: different cause values? */ |
| |
| /* expect Clear Request from BSC */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_di; |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := bit2int(rx_di.userData.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect BSC to disable the channel */ |
| f_exp_chan_rel_and_clear(dt); |
| |
| /* wait for SCCP emulation to do its job */ |
| f_sleep(1.0); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior of early CONN FAIL IND from BTS (before EST IND!) */ |
| /* See also https://www.osmocom.org/issues/3182 */ |
| testcase TC_early_conn_fail() runs on test_CT { |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* BTS->BSC: Send CHAN RQD and wait for allocation; acknowledge it */ |
| dt.rsl_chan_nr := f_chreq_act_ack(f_rnd_ra_cs(), 23); |
| |
| /* BTS->BSC: simulate CONN FAIL IND */ |
| f_ipa_tx(ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| |
| /* BTS->BSC: Expect RF channel release from BSC on Abis */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), Tval := 10.0); |
| |
| /* BTS<-BSC: respond with CHAN REL ACK */ |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior of late CONN FAIL IND from BTS (ater REL IND!) */ |
| /* See also https://www.osmocom.org/issues/3182 */ |
| testcase TC_late_conn_fail() runs on test_CT { |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* BSC<-MSC: Instruct BSC to clear connection */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(0))); |
| |
| /* BTS->BSC: expect BSC to deactivate SACCH */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_DEACT_SACCH(dt.rsl_chan_nr)); |
| |
| /* BTS->BSC: simulate a late CONN FAIL IND from BTS */ |
| f_ipa_tx(ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| |
| /* BTS<-BSC: Expect RF channel release from BSC on Abis */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), Tval := 10.0); |
| /* BTS->BSC: respond with CHAN REL ACK */ |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); |
| |
| /* BSC->MSC: expect Clear Complete from BSC */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)); |
| |
| /* BSC<-MSC: MSC disconnects as requested. */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| |
| f_shutdown_helper(); |
| } |
| |
| private function f_TC_stats_conn_fail(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| f_statsd_reset(); |
| |
| /* Establish SDCCH */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeCSD); |
| f_establish_fully(ass_cmd, exp_fail); |
| |
| /* Expect stats to be 0 */ |
| var StatsDExpects expect := { |
| {name := "TTCN3.bts.0.chan.rf_fail", mtype := "c", min := 0, max := 0}, |
| {name := "TTCN3.bts.0.chan.rf_fail_sdcch", mtype := "c", min := 0, max := 0} |
| }; |
| f_statsd_expect(expect); |
| |
| /* Simulate CONN FAIL IND on SDCCH */ |
| RSL.send(ts_ASP_RSL_UD( |
| ts_RSL_CONN_FAIL_IND(g_chan_nr, RSL_ERR_RADIO_LINK_FAIL), |
| IPAC_PROTO_RSL_TRX0)); |
| |
| f_sleep(1.0); |
| |
| /* Expect stats to be 1 */ |
| expect := { |
| {name := "TTCN3.bts.0.chan.rf_fail", mtype := "c", min := 1, max := 1}, |
| {name := "TTCN3.bts.0.chan.rf_fail_sdcch", mtype := "c", min := 1, max := 1} |
| }; |
| f_statsd_expect(expect); |
| BSSAP.receive(tr_BSSMAP_ClearRequest); |
| f_perform_clear(); |
| } |
| testcase TC_stats_conn_fail() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_stats_conn_fail), pars); |
| vc_conn.done; |
| |
| f_shutdown_helper(); |
| } |
| |
| function f_expect_chan_rel(RslChannelNr rsl_chan_nr, |
| BtsTrxIdx idx := {0, 0}, |
| boolean expect_deact_sacch := true, |
| boolean expect_rr_chan_rel := true, |
| boolean expect_rll_rel_req := true, |
| boolean handle_rll_rel := true, |
| template CellSelIndValue expect_cells := omit, |
| template (present) RR_Cause expect_rr_cause := ? |
| ) runs on test_CT { |
| |
| var RslLinkId main_dcch := valueof(ts_RslLinkID_DCCH(0)); |
| var boolean got_deact_sacch := false; |
| var boolean got_rr_chan_rel := false; |
| var boolean got_rll_rel_req := false; |
| var ASP_RSL_Unitdata ud; |
| var RSL_IE_Body l3_ie; |
| var PDU_ML3_NW_MS l3; |
| var RR_Cause got_cause; |
| log("f_expect_chan_rel() expecting: expect_deact_sacch=", expect_deact_sacch, " expect_rr_chan_rel=", expect_rr_chan_rel, |
| " expect_rll_rel_req=", expect_rll_rel_req); |
| alt { |
| [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_DEACT_SACCH(rsl_chan_nr))) { |
| got_deact_sacch := true; |
| repeat; |
| } |
| [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_DATA_REQ(rsl_chan_nr, ?, decmatch tr_RRM_RR_RELEASE))) -> value ud { |
| got_rr_chan_rel := true; |
| |
| if (f_rsl_find_ie(ud.rsl, RSL_IE_L3_INFO, l3_ie) == false) { |
| setverdict(fail, "cannot find L3"); |
| mtc.stop; |
| } |
| l3 := dec_PDU_ML3_NW_MS(l3_ie.l3_info.payload); |
| |
| if (not istemplatekind(expect_cells, "omit")) { |
| var CellSelIndValue cells := dec_CellSelIndValue( |
| l3.msgs.rrm.channelRelease.cellSelectionIndicator.cellSelectionIndicatorValue); |
| |
| log("GOT RR CHANNEL RELEASE WITH CELLS: ", cells); |
| if (match(cells, expect_cells)) { |
| setverdict(pass); |
| } else { |
| log("EXPECTED CELLS: ", expect_cells); |
| setverdict(fail, "Received cells list on RR Channel Release does not match expectations"); |
| } |
| } |
| |
| int2enum(oct2int(l3.msgs.rrm.channelRelease.rRCause.valuePart), got_cause); |
| log("GOT CAUSE CODE: ", l3.msgs.rrm.channelRelease.rRCause.valuePart, " = ", got_cause); |
| if (match(got_cause, expect_rr_cause)) { |
| setverdict(pass); |
| } else { |
| log("EXPECTED CAUSE CODE: ", expect_rr_cause); |
| setverdict(fail, "Received RR Channel Release Cause code does not match expectations"); |
| } |
| repeat; |
| } |
| [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_REL_REQ(rsl_chan_nr, ?))) { |
| got_rll_rel_req := true; |
| /* FIXME: Why are we getting this for LinkID SACCH? */ |
| if (handle_rll_rel) { |
| f_ipa_tx(ts_RSL_REL_CONF(rsl_chan_nr, main_dcch)); |
| } |
| repeat; |
| } |
| [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL))) { |
| /* respond with CHAN REL ACK */ |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(rsl_chan_nr)); |
| } |
| /* ignore any user data */ |
| [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeR(?))) { |
| repeat; |
| } |
| } |
| |
| log("f_expect_chan_rel() summary: got_deact_sacch=", got_deact_sacch, " got_rr_chan_rel=", got_rr_chan_rel, |
| " got_rll_rel_req=", got_rll_rel_req); |
| |
| if (expect_deact_sacch != got_deact_sacch) { |
| setverdict(fail, "f_expect_chan_rel(): expect_deact_sacch=", expect_deact_sacch, " got_deact_sacch=", got_deact_sacch); |
| } |
| if (expect_rr_chan_rel != got_rr_chan_rel) { |
| setverdict(fail, "f_expect_chan_rel(): expect_rr_chan_rel=", expect_rr_chan_rel, " got_rr_chan_rel=", got_rr_chan_rel); |
| } |
| if (expect_rll_rel_req != got_rll_rel_req) { |
| setverdict(fail, "f_expect_chan_rel(): expect_rll_rel_req=", expect_rll_rel_req, " got_rll_rel_req=", got_rll_rel_req); |
| } |
| } |
| |
| /* Test behavior of channel release after hard Clear Command from MSC */ |
| testcase TC_chan_rel_hard_clear() runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect Clear Complete from BSC on A */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| f_shutdown_helper(); |
| } |
| |
| function f_TC_chan_rel_last_eutran_plmn_hard_clear(boolean tx_csfb_ind) runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| /* Send CommonID with some random PLMN (BSC doesn't take it into account |
| /* yet when generating the EUTRAN neigh list in RR CHannel Release) */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_CommonId('001019876543210'H, '323454'O))); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| if (tx_csfb_ind) { |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommandCSFB(cause))); |
| } else { |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| } |
| |
| /* expect Clear Complete from BSC on A */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| /* 1 neighbor is added by default in osmo-bts.cfg and |
| SystemInformationConfig_default, use that: */ |
| var template CellSelIndValue exp_cells := f_tr_rr_chan_rel_earfcns(1); |
| |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false, expect_cells := exp_cells); |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior of RR Channel rRelease after Clear Command without CSFB indicator |
| from MSC, previously receiving any CommonID containing the "Last Used E-UTRAN |
| PLMN Id". According to spec (3GPP TS 48.008 sec 3.1.30) that's the bit requesting |
| EUTRAN neighbor list sent later on by BSC in RR Channel, so receiving CSFB |
| Indicator or not shouldn't matter at all. */ |
| testcase TC_chan_rel_last_eutran_plmn_hard_clear_no_csfb() runs on test_CT { |
| f_TC_chan_rel_last_eutran_plmn_hard_clear(false); |
| } |
| |
| /* Test behavior of RR Channel rRelease after Clear Command with CSFB indicator from |
| MSC, previously receiving any CommonID containing the "Last Used E-UTRAN PLMN |
| Id". According to spec (3GPP TS 48.008 sec 3.1.30) that's the bit requesting |
| EUTRAN neighbor list sent later on by BSC in RR Channel. */ |
| testcase TC_chan_rel_last_eutran_plmn_hard_clear_csfb() runs on test_CT { |
| f_TC_chan_rel_last_eutran_plmn_hard_clear(true); |
| } |
| |
| /* Test behavior of RR Channel Release after Clear Command with CSFB indicator from |
| MSC, without receiving any CommonID containing the "Last Used E-UTRAN PLMN |
| Id". According to spec (TS 48.008 version 16.0.0 Release 16 "3.2.1.21") the |
| CSFB Indicator should not be used anymore, and hence, there should be no |
| EUTRAN neighbor list sent by BSC in RR Channel release since no CommonId with |
| Last Used E-UTRAN PLMN Id" IE was sent for this conn. */ |
| testcase TC_chan_rel_hard_clear_csfb() runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommandCSFB(cause))); |
| |
| /* expect Clear Complete from BSC on A */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior of channel release after hard RLSD from MSC */ |
| testcase TC_chan_rel_hard_rlsd() runs on test_CT { |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior of channel release after hard RLSD from MSC and MS is not responding to RLL REL REQ */ |
| testcase TC_chan_rel_hard_rlsd_ms_dead() runs on test_CT { |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior of channel release after BSSMAP RESET from MSC */ |
| testcase TC_chan_rel_a_reset() runs on test_CT { |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* Clear the queue, it might still contain stuff like IMMEDIATE ASSIGN */ |
| IPA_RSL[0][0].clear; |
| |
| /* perform BSSAP RESET, expect RESET ACK and DISC.ind on connection */ |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[0].sccp_addr_peer, g_bssap[0].sccp_addr_own, ts_BSSMAP_Reset(0, g_osmux_enabled_cn))); |
| interleave { |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(g_bssap[0].sccp_addr_own, g_bssap[0].sccp_addr_peer, tr_BSSMAP_ResetAck(g_osmux_enabled_cn))) { } |
| [] BSSAP.receive(tr_BSSAP_DISC_ind(dt.sccp_conn_id, ?, ?)) { } |
| } |
| |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| f_shutdown_helper(); |
| } |
| |
| /* Verify T(iar) triggers and releases the channel */ |
| testcase TC_chan_rel_sccp_tiar_timeout() runs on test_CT { |
| var DchanTuple dt; |
| |
| /* Set T(iar) in BSC low enough that it will trigger before other side |
| has time to keep alive with a T(ias). Keep recommended ratio of |
| T(iar) >= T(ias)*2 */ |
| g_bsc_sccp_timer_ias := 2; |
| g_bsc_sccp_timer_iar := 5; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_chan_rel_rr_cause(myBSSMAP_Cause clear_cmd_cause, |
| template (present) RR_Cause expect_rr_cause) |
| runs on test_CT |
| { |
| var DchanTuple dt; |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(enum2int(clear_cmd_cause)))); |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false, expect_rr_cause := expect_rr_cause); |
| } |
| |
| /* Test that Clear Command cause codes affect the RR Channel Release cause code */ |
| testcase TC_chan_rel_rr_cause() runs on test_CT { |
| f_init(1); |
| |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_CALL_CONTROL, GSM48_RR_CAUSE_NORMAL); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_HANDOVER_SUCCESSFUL, GSM48_RR_CAUSE_NORMAL); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_PREEMPTION, GSM48_RR_CAUSE_PREMPTIVE_REL); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_RADIO_INTERFACE_MESSAGE_FAILURE, GSM48_RR_CAUSE_PROT_ERROR_UNSPC); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_RADIO_INTERFACE_FAILURE, GSM48_RR_CAUSE_ABNORMAL_UNSPEC); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_EQUIPMENT_FAILURE, GSM48_RR_CAUSE_ABNORMAL_UNSPEC); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior if RSL EST IND for non-active channel */ |
| testcase TC_rll_est_ind_inact_lchan() runs on test_CT { |
| timer T := 2.0; |
| |
| f_init(1); |
| |
| var octetstring l3 := '00010203040506'O; |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(6)); |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) { |
| setverdict(fail, "MSC received COMPL L3 for non-active lchan"); |
| } |
| [] BSSAP.receive {} |
| [] IPA_RSL[0][0].receive {} |
| [] T.timeout {} |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior if RSL EST IND for invalid SAPI */ |
| testcase TC_rll_est_ind_inval_sapi1() runs on test_CT { |
| var RslChannelNr chan_nr; |
| |
| f_init(1); |
| |
| chan_nr := f_chreq_act_ack() |
| |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(1)), l3)); |
| |
| timer T := 2.0; |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) { |
| setverdict(fail, "MSC received COMPL L3 for invalid SAPI 1"); |
| } |
| [] BSSAP.receive { repeat; } |
| [] IPA_RSL[0][0].receive { repeat; } |
| [] T.timeout {} |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior if RSL EST IND for invalid SAPI */ |
| testcase TC_rll_est_ind_inval_sapi3() runs on test_CT { |
| timer T := 2.0; |
| |
| f_init(1); |
| |
| var RslChannelNr chan_nr := f_chreq_act_ack(); |
| |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(3)), l3)); |
| |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) { |
| setverdict(fail, "MSC received COMPL L3 for invalid SAPI 3"); |
| } |
| [] BSSAP.receive { repeat; } |
| [] IPA_RSL[0][0].receive { repeat; } |
| [] T.timeout {} |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test behavior if RSL EST IND for invalid SACCH */ |
| testcase TC_rll_est_ind_inval_sacch() runs on test_CT { |
| timer T := 2.0; |
| |
| f_init(1); |
| |
| var RslChannelNr chan_nr := f_chreq_act_ack(); |
| |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_SACCH(0)), l3)); |
| |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) { |
| setverdict(fail, "MSC received COMPL L3 for invalid Link SACCH"); |
| } |
| [] BSSAP.receive { repeat; } |
| [] IPA_RSL[0][0].receive { repeat; } |
| [] T.timeout {} |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify DLCI / RSL Link ID conversion for MO/MT messages on SAPI0/SAPI3 */ |
| private function f_TC_tch_dlci_link_id_sapi(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| /* SAPI0 has already been established by f_establish_fully(), establish SAPI3 */ |
| RSL.send(ts_RSL_EST_IND(g_chan_nr, ts_RslLinkID_SACCH(3), '0904'O)); |
| /* Expect BSSAP/DTAP on SAPI3 (DLCI IE) */ |
| BSSAP.receive(PDU_BSSAP:{ |
| discriminator := '1'B, |
| spare := '0000000'B, |
| dlci := 'C3'O, |
| lengthIndicator := ?, |
| pdu := { dtap := '0904'O } |
| }); |
| |
| /* Send messages on DCCH/SAPI0 and ACCH/SAPI3 */ |
| for (var integer i := 0; i < 32; i := i + 1) { |
| var octetstring l3 := '09'O & f_rnd_octstring(14); |
| var template (value) RslLinkId link_id; |
| var template (value) OCT1 dlci; |
| |
| if (i mod 2 == 0) { |
| /* SAPI0 on FACCH or SDCCH */ |
| link_id := ts_RslLinkID_DCCH(0); |
| dlci := '80'O; |
| } else { |
| /* SAPI3 on SACCH */ |
| link_id := ts_RslLinkID_SACCH(3); |
| dlci := 'C3'O; |
| } |
| |
| /* Send MO message: RSL -> BSSAP */ |
| f_mo_l3_transceive(RSL, link_id, dlci, l3); |
| /* Send MT message: BSSAP -> RSL */ |
| f_mt_l3_transceive(RSL, link_id, dlci, l3); |
| } |
| f_perform_clear(); |
| } |
| testcase TC_tch_dlci_link_id_sapi() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_tch_dlci_link_id_sapi), pars); |
| vc_conn.done; |
| |
| f_shutdown_helper(); |
| } |
| |
| private function f_exp_sapi_n_reject(template (present) GsmSapi sapi := ?, |
| template (present) myBSSMAP_Cause cause := ?, |
| template (present) BIT2 cc := ?, |
| float T_val := 2.0) |
| runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| timer T; |
| |
| var template (present) BSSMAP_IE_Cause tr_cause := tr_BSSMAP_IE_Cause(cause); |
| var template (present) PDU_BSSAP tr_pdu := tr_BSSMAP_SAPInReject(sapi); |
| |
| T.start(T_val); |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(?, tr_pdu)) -> value rx_di { |
| var BSSMAP_IE_Cause rx_cause := rx_di.userData.pdu.bssmap.sAPInReject.cause; |
| if (not match(rx_cause, tr_cause)) { |
| setverdict(fail, "Rx unexpected Cause IE: ", |
| rx_cause, " vs expected ", tr_cause); |
| } |
| |
| /* Who ever on the earth decided to define this field as two separate bits?!? */ |
| var BIT2 rx_cc := rx_di.userData.pdu.bssmap.sAPInReject.dLCI.c2 |
| & rx_di.userData.pdu.bssmap.sAPInReject.dLCI.c1; |
| if (not match(rx_cc, cc)) { |
| setverdict(fail, "Rx unexpected Control Channel type: ", |
| rx_cc, " vs expected ", cc); |
| } |
| |
| setverdict(pass); |
| } |
| [] BSSAP.receive(BSSAP_N_DATA_ind:?) -> value rx_di { |
| setverdict(fail, "Rx unexpected BSSAP PDU: ", rx_di); |
| } |
| [] T.timeout { |
| setverdict(fail, "Timeout waiting for BSSMAP SAPI N Reject"); |
| } |
| } |
| } |
| |
| /* Check if we get SAPI N Reject on receipt of unexpected RLL RELease INDication */ |
| testcase TC_rll_rel_ind_sapi_n_reject() runs on test_CT { |
| var octetstring rnd_data := f_rnd_octstring(16); |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* MS establishes a SAPI=0 link on DCCH */ |
| dt := f_est_dchan(f_rnd_ra_cs(), 23, rnd_data); |
| |
| /* MSC sends some data on (not yet established) SAPI=3 link */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); |
| /* BSC attempts to establish a SAPI=3 link on DCCH */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); |
| |
| /* MS sends unexpected RELease INDication on SAPI=3 */ |
| f_ipa_tx(ts_RSL_REL_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3))); |
| /* We expect to receive BSSMAP SAPI N Reject message from the BSC */ |
| f_exp_sapi_n_reject(3, GSM0808_CAUSE_MS_NOT_EQUIPPED); |
| |
| /* Clean up the connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Check if we get SAPI N Reject on receipt of unexpected RLL ERROR INDication */ |
| testcase TC_rll_err_ind_sapi_n_reject() runs on test_CT { |
| var octetstring rnd_data := f_rnd_octstring(16); |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* MS establishes a SAPI=0 link on DCCH */ |
| dt := f_est_dchan(f_rnd_ra_cs(), 23, rnd_data); |
| |
| /* MSC sends some data on (not yet established) SAPI=3 link */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); |
| /* BSC attempts to establish a SAPI=3 link on DCCH */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); |
| |
| /* BTS sends unexpected ERROR INDication on SAPI=3 */ |
| f_ipa_tx(ts_RSL_ERROR_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3), ''O)); |
| /* We expect to receive BSSMAP SAPI N Reject message from the BSC */ |
| f_exp_sapi_n_reject(3, GSM0808_CAUSE_BSS_NOT_EQUIPPED); |
| |
| /* Clean up the connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Check if we get SAPI N Reject due to a SAPI=3 link establishment timeout */ |
| testcase TC_rll_timeout_sapi_n_reject() runs on test_CT { |
| var octetstring rnd_data := f_rnd_octstring(16); |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* MS establishes a SAPI=0 link on DCCH */ |
| dt := f_est_dchan(f_rnd_ra_cs(), 23, rnd_data); |
| |
| /* MSC sends some data on (not yet established) SAPI=3 link */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); |
| /* BSC attempts to establish a SAPI=3 link on DCCH */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); |
| |
| /* MS does not respond, so the link establishment timeout triggers SAPI N Reject */ |
| f_exp_sapi_n_reject(3, GSM0808_CAUSE_BSS_NOT_EQUIPPED, T_val := 8.0); |
| |
| /* Clean up the connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Check DLCI CC (Control Channel type) bits in SAPI N Reject */ |
| testcase TC_rll_sapi_n_reject_dlci_cc() runs on test_CT { |
| var octetstring rnd_data := f_rnd_octstring(16); |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* MS establishes a SAPI=0 link on DCCH */ |
| dt := f_est_dchan(f_rnd_ra_cs(), 23, rnd_data); |
| |
| /* MSC sends some data on (not yet established) SAPI=3 link */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); |
| /* BSC attempts to establish a SAPI=3 link on DCCH */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); |
| |
| /* MS sends unexpected ERROR INDication on DCCH/ACCH SAPI=3 */ |
| f_ipa_tx(ts_RSL_ERROR_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3), ''O)); |
| f_exp_sapi_n_reject(3, GSM0808_CAUSE_BSS_NOT_EQUIPPED, '10'B); |
| |
| /* Clean up the connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); |
| |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si_default() runs on test_CT { |
| f_init(0); |
| f_init_bts_and_check_sysinfo(0, expect_si := SystemInformationConfig_default); |
| f_shutdown_helper(); |
| } |
| |
| /* We're testing SI2quater with lists of EARFCNs. Instead of just incrementing EARFCNs, also pick some from the edges of |
| * the entire value range. This function provides the same EARFCN numbers for the same earfcn_index */ |
| private function f_test_si2quater_earfcn_by_idx(integer earfcn_index) return uint16_t |
| { |
| select (earfcn_index) { |
| case (0) { |
| /* E-ARFCN 111 is already added in the osmo-bsc.cfg */ |
| return 111; |
| } |
| case (1) { |
| return 1; |
| } |
| case (2) { |
| return 0; |
| } |
| case (3) { |
| return 65535; |
| } |
| case else { |
| return 23 * (earfcn_index - 3); |
| } |
| } |
| } |
| |
| function f_test_si2quater(integer total_earfcns, template SystemInformationConfig expect_si, |
| template CellSelIndValue expect_cells := omit) runs on test_CT { |
| |
| f_init(0); |
| |
| /* E-ARFCN 111 is already added in the osmo-bsc.cfg, so only add more arfcns if total_earfcns > 1 */ |
| for (var integer i := 1; i < total_earfcns; i := i + 1) { |
| f_bts_0_cfg(BSCVTY, {"si2quater neighbor-list add earfcn " & int2str(f_test_si2quater_earfcn_by_idx(i)) |
| & " thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3"}); |
| } |
| |
| f_init_bts_and_check_sysinfo(0, expect_si := expect_si); |
| |
| if (not istemplatekind(expect_cells, "omit")) { |
| /* Also check that RR Channel Release contains these EARFCNs. |
| * (copied code from TC_chan_rel_hard_clear_csfb) */ |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| /* Send CommonID with some random PLMN (BSC doesn't take it into account |
| * yet when generating the EUTRAN neigh list in RR CHannel Release) */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_CommonId('001019876543210'H, '323454'O))); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommandCSFB(cause))); |
| |
| /* expect Clear Complete from BSC on A */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false, expect_cells := expect_cells); |
| } |
| |
| for (var integer i := 1; i < total_earfcns; i := i + 1) { |
| f_bts_0_cfg(BSCVTY, {"si2quater neighbor-list del earfcn " & int2str(f_test_si2quater_earfcn_by_idx(i))}); |
| } |
| } |
| |
| private function f_tr_si2quater_earfcns(integer count) return template SI2quaterRestOctetsList |
| { |
| var template SI2quaterRestOctetsList si2quater := {}; |
| var integer si2quater_count := (count + 2) / 3; |
| |
| for (var integer i := 0; i < count; i := i + 1) { |
| var integer earfcn := f_test_si2quater_earfcn_by_idx(i); |
| var integer index := i / 3; |
| var integer earfcn_index := i mod 3; |
| if (index >= lengthof(si2quater)) { |
| si2quater[index] := tr_SI2quaterRestOctets_EUTRAN(index := index, count := si2quater_count - 1); |
| } |
| si2quater[index].rel_additions.rel5.rel6.rel7.rel8.prio_eutran_params_desc.desc.eutran_params_desc.desc.repeated_neigh_cells[0].cell_desc_list[earfcn_index] := tr_EUTRAN_CellDesc_default(e_arfcn := earfcn); |
| } |
| |
| return si2quater; |
| } |
| |
| private function f_tr_rr_chan_rel_earfcns(integer count) return template CellSelIndValue |
| { |
| var template CellSelIndValue_EUTRAN_Descrs cells := {}; |
| |
| /* the lte neighbors must match the config & vty to pass this test */ |
| for (var integer i := 0; i < count; i := i + 1) { |
| var integer earfcn := f_test_si2quater_earfcn_by_idx(i); |
| cells[i] := tr_CellSelIndValue_EUTRAN_Descr(earfcn, '1'B, 3); |
| } |
| |
| return tr_CellSelIndValue_EUTRAN(cells); |
| } |
| |
| private function f_tc_si2quater_n_earfcns(integer n) runs on test_CT |
| { |
| var template SystemInformationConfig sic := SystemInformationConfig_default; |
| sic.si2quater := f_tr_si2quater_earfcns(n); |
| var template CellSelIndValue cells := f_tr_rr_chan_rel_earfcns(n); |
| f_test_si2quater(n, sic, cells); |
| } |
| |
| testcase TC_si2quater_2_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(2); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_3_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(3); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_4_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(4); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_5_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(5); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_6_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(6); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_12_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(12); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_23_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(23); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_32_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(32); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_33_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(33); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_42_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(42); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_si2quater_48_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(48); |
| f_shutdown_helper(); |
| } |
| |
| /* verify the VTY error response when adding too many EARFCNs, and showing that osmo-bsc still sends 16 SI2quater with |
| * 48 EARFCNs. */ |
| testcase TC_si2quater_49_earfcns() runs on test_CT { |
| var template SystemInformationConfig sic := SystemInformationConfig_default; |
| sic.si2quater := f_tr_si2quater_earfcns(48); /* 48, not 49! */ |
| f_init(0); |
| |
| for (var integer i := 1; i < 48; i := i + 1) { |
| f_bts_0_cfg(BSCVTY, {"si2quater neighbor-list add earfcn " & int2str(f_test_si2quater_earfcn_by_idx(i)) |
| & " thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3"}); |
| } |
| |
| /* The 49th EARFCN no longer fits, expect VTY error */ |
| f_vty_enter_cfg_bts(BSCVTY, 0); |
| var charstring vty_error; |
| vty_error := f_vty_transceive_ret(BSCVTY, |
| "si2quater neighbor-list add earfcn 70 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3") |
| f_vty_transceive(BSCVTY, "end"); |
| |
| if (f_strstr(vty_error, "Unable to add ARFCN 70") >= 0) { |
| log("Got expected VTY error: ", vty_error); |
| setverdict(pass); |
| } else { |
| setverdict(fail, "Expected the 49th EUTRAN ARFCN to be rejected by vty config, got: ", vty_error); |
| } |
| |
| f_init_bts_and_check_sysinfo(0, expect_si := sic); |
| |
| for (var integer i := 1; i < 48; i := i + 1) { |
| f_bts_0_cfg(BSCVTY, {"si2quater neighbor-list del earfcn " & int2str(f_test_si2quater_earfcn_by_idx(i))}); |
| } |
| f_shutdown_helper(); |
| } |
| |
| private function f_acc09_count_allowed(AccessControlClass acc) return uint8_t |
| { |
| var uint8_t count := 0; |
| for (var integer i := 5; i < 16; i := i + 1) { |
| if (acc[i] == '0'B) { /* the list marks barred, we count allowed */ |
| count := count + 1; |
| } |
| } |
| return count; |
| } |
| |
| private function f_recv_next_si1(integer rsl_idx := 0) runs on test_CT return SystemInformationType1 |
| { |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| var SystemInformationType1 last_si1; |
| |
| timer T := 30.0; |
| T.start; |
| alt { |
| [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD((tr_RSL_NO_BCCH_INFO, |
| tr_RSL_BCCH_INFO, |
| tr_RSL_NO_SACCH_FILL, |
| tr_RSL_SACCH_FILL))) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| if (g_system_information[rsl_idx].si1 == omit) { |
| repeat; |
| } |
| last_si1 := g_system_information[rsl_idx].si1; |
| g_system_information[rsl_idx].si1 := omit; |
| T.stop; |
| } |
| [] IPA_RSL[rsl_idx][0].receive { repeat; } |
| [] T.timeout { setverdict(fail, "Timeout receiving next SI1"); } |
| } |
| return last_si1; |
| } |
| |
| /* verify ACC rotate feature */ |
| testcase TC_si_acc_rotate() runs on test_CT { |
| var template SystemInformationConfig sic := SystemInformationConfig_default; |
| var SystemInformationType1 last_si1; |
| var AccessControlClass acc; |
| var uint8_t count; |
| var integer times_allowed[10] := { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| f_init(0, guard_timeout := 60.0); |
| |
| f_bts_0_cfg(BSCVTY, {"rach access-control-class 5 barred", |
| "access-control-class-rotate 3", |
| "access-control-class-rotate-quantum 1"}); |
| |
| /* Init and get first sysinfo */ |
| f_init_bts_and_check_sysinfo(0, expect_si := ?); |
| |
| for (var integer i:= 0; i < 20; i := i + 1) { |
| last_si1 := f_recv_next_si1(0); |
| acc := last_si1.rach_control.acc; |
| count := f_acc09_count_allowed(acc); |
| log("RSL: GOT SI1 ACC len=", count, ": ", acc); |
| |
| if (count != 3) { |
| log("RSL: EXPECTED SI ACC len=3"); |
| setverdict(fail, "received SI does not match expectations"); |
| break; |
| } |
| |
| for (var integer j := 0; j < 10; j := j + 1) { |
| if (acc[16 - 1 - j] == '0'B) { /* the list marks barred, we count allowed */ |
| times_allowed[j] := times_allowed[j] + 1; |
| } |
| } |
| } |
| |
| for (var integer j := 0; j < 10; j := j + 1) { |
| log("ACC", j, " allowed ", times_allowed[j], " times" ); |
| if (j != 5 and times_allowed[j] < 3) { |
| setverdict(fail, "ACC", j, " ERROR: allowed ", times_allowed[j], " < 1 times"); |
| } else if (j == 5 and times_allowed[j] > 0) { |
| setverdict(fail, "ACC", j, " ERROR: allowed ", times_allowed[j], " > 0 times"); |
| } |
| } |
| |
| f_bts_0_cfg(BSCVTY, {"access-control-class-rotate 10", |
| "rach access-control-class 5 allowed"}); |
| f_shutdown_helper(); |
| } |
| |
| /* verify ACC startup ramp+rotate feature */ |
| testcase TC_si_acc_ramp_rotate() runs on test_CT { |
| var template SystemInformationConfig sic := SystemInformationConfig_default; |
| var SystemInformationType1 last_si1; |
| var AccessControlClass acc; |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| var uint8_t count; |
| var uint8_t prev_count; |
| var integer times_allowed[10] := { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| f_init(0, guard_timeout := 80.0); |
| |
| f_bts_0_cfg(BSCVTY, {"rach access-control-class 4 barred", |
| "access-control-class-rotate 0", |
| "access-control-class-rotate-quantum 1", |
| "access-control-class-ramping", |
| "access-control-class-ramping-step-interval 5", |
| "access-control-class-ramping-step-size 5"}); |
| |
| /* Init and get first sysinfo */ |
| f_init_bts_and_check_sysinfo(0, expect_si := ?); |
| last_si1 := g_system_information[0].si1; |
| acc := last_si1.rach_control.acc; |
| count := f_acc09_count_allowed(acc); |
| /* Adm subset size was set to 0 above, so wait until all ACC are barred */ |
| while (count > 0) { |
| last_si1 := f_recv_next_si1(0); |
| acc := last_si1.rach_control.acc; |
| count := f_acc09_count_allowed(acc); |
| log("RSL: wait len()=0: GOT SI1 ACC len=", count, ": ", acc); |
| } |
| |
| /* Increase adm subset size, we should see ramping start up */ |
| f_bts_0_cfg(BSCVTY, {"access-control-class-rotate 10"}); |
| prev_count := 0; |
| while (true) { |
| last_si1 := f_recv_next_si1(0); |
| acc := last_si1.rach_control.acc; |
| count := f_acc09_count_allowed(acc); |
| log("RSL: GOT SI1 ACC len=", count, ": ", acc); |
| |
| if (prev_count > count) { |
| setverdict(fail, "ACC allowed count dropped while expecting grow: ", prev_count, " -> ", count); |
| break; |
| } |
| |
| if (count == 9) { |
| break; /* Maximum reached (10 - 1 perm barred), done here */ |
| } |
| |
| prev_count := count; |
| } |
| |
| setverdict(pass); |
| |
| f_bts_0_cfg(BSCVTY, {"access-control-class-rotate 10", |
| "rach access-control-class 4 allowed", |
| "no access-control-class-ramping"}); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_ctrl_msc_connection_status() runs on test_CT { |
| var charstring ctrl_resp; |
| |
| f_init(1); |
| |
| /* See https://osmocom.org/issues/2729 */ |
| f_ctrl_get_exp(IPA_CTRL, "msc_connection_status", "connected"); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_ctrl_msc0_connection_status() runs on test_CT { |
| var charstring ctrl_resp; |
| |
| f_init(1); |
| |
| f_ctrl_get_exp(IPA_CTRL, "msc.0.connection_status", "connected"); |
| f_shutdown_helper(); |
| } |
| |
| /* Verify correct stats on the number of configured and connected MSCs */ |
| private function f_tc_stat_num_msc_connected_msc_connhdlr(integer expect_num_msc_connected) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var StatsDExpects expect := { |
| { name := "TTCN3.bsc.0.num_msc.connected", mtype := "g", min := expect_num_msc_connected, max := expect_num_msc_connected }, |
| { name := "TTCN3.bsc.0.num_msc.total", mtype := "g", min := NUM_MSC, max := NUM_MSC } |
| }; |
| f_statsd_expect(expect); |
| } |
| |
| private function f_tc_stat_num_msc_connected_test_ct(void_fn tc_fn, integer nr_msc) runs on test_CT |
| { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(nr_bts := 1, handler_mode := true, nr_msc := nr_msc); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(tc_fn); |
| vc_conn.done; |
| |
| /* Also verify stat exposed on CTRL interface */ |
| f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_msc:connected", int2str(nr_msc)); |
| f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_msc:total", int2str(NUM_MSC)); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify that when 1 MSC is active, that num_msc:connected reports 1. */ |
| private function f_tc_stat_num_msc_connected_1(charstring id) runs on MSC_ConnHdlr { |
| f_tc_stat_num_msc_connected_msc_connhdlr(1); |
| } |
| testcase TC_stat_num_msc_connected_1() runs on test_CT { |
| f_tc_stat_num_msc_connected_test_ct(refers(f_tc_stat_num_msc_connected_1), 1); |
| } |
| |
| /* Verify that when 2 MSCs are active, that num_msc:connected reports 2. */ |
| private function f_tc_stat_num_msc_connected_2(charstring id) runs on MSC_ConnHdlr { |
| f_tc_stat_num_msc_connected_msc_connhdlr(2); |
| } |
| testcase TC_stat_num_msc_connected_2() runs on test_CT { |
| f_tc_stat_num_msc_connected_test_ct(refers(f_tc_stat_num_msc_connected_2), 2); |
| } |
| |
| /* Verify that when 3 MSCs are active, that num_msc:connected reports 3. */ |
| private function f_tc_stat_num_msc_connected_3(charstring id) runs on MSC_ConnHdlr { |
| f_tc_stat_num_msc_connected_msc_connhdlr(3); |
| } |
| testcase TC_stat_num_msc_connected_3() runs on test_CT { |
| f_tc_stat_num_msc_connected_test_ct(refers(f_tc_stat_num_msc_connected_3), 3); |
| } |
| |
| /* Verify correct stats on the number of configured and connected MSCs */ |
| private function f_tc_stat_num_bts_connected_msc_connhdlr(integer expect_num_bts_connected) runs on MSC_ConnHdlr { |
| var integer num_trx_connected := 0; |
| var integer num_trx_total := 0; |
| |
| for (var integer i := 0; i < lengthof(c_BtsParams); i := i + 1) { |
| var integer trx_num := c_BtsParams[i].trx_num; |
| num_trx_total := num_trx_total + trx_num; |
| if (i < expect_num_bts_connected) { |
| num_trx_connected := num_trx_connected + trx_num; |
| } |
| } |
| |
| var StatsDExpects expect := { |
| { name := "TTCN3.bsc.0.num_bts.oml_connected", mtype := "g", min := expect_num_bts_connected, max := NUM_BTS_CFG }, |
| { name := "TTCN3.bsc.0.num_bts.all_trx_rsl_connected", mtype := "g", min := expect_num_bts_connected, max := expect_num_bts_connected }, |
| { name := "TTCN3.bsc.0.num_bts.total", mtype := "g", min := NUM_BTS_CFG, max := NUM_BTS_CFG }, |
| { name := "TTCN3.bsc.0.num_trx.rsl_connected", mtype := "g", min := num_trx_connected, max := num_trx_connected }, |
| { name := "TTCN3.bsc.0.num_trx.total", mtype := "g", min := num_trx_total, max := num_trx_total } |
| }; |
| |
| g_pars := f_gen_test_hdlr_pars(); |
| f_statsd_expect(expect); |
| } |
| |
| private function f_tc_stat_num_bts_connected_test_ct(void_fn tc_fn, integer nr_bts) runs on test_CT { |
| var integer num_trx_connected := 0; |
| var integer num_trx_total := 0; |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(nr_bts := nr_bts, handler_mode := true, nr_msc := 1); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(tc_fn); |
| vc_conn.done; |
| |
| for (var integer i := 0; i < lengthof(c_BtsParams); i := i + 1) { |
| var integer trx_num := c_BtsParams[i].trx_num; |
| num_trx_total := num_trx_total + trx_num; |
| if (i < nr_bts) { |
| num_trx_connected := num_trx_connected + trx_num; |
| } |
| } |
| |
| /* Also verify stat exposed on CTRL interface */ |
| f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_bts:all_trx_rsl_connected", int2str(nr_bts)); |
| f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_bts:total", int2str(NUM_BTS_CFG)); |
| f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_trx:rsl_connected", int2str(num_trx_connected)); |
| f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_trx:total", int2str(num_trx_total)); |
| |
| /* Verify rf_states exposed on CTRL interface */ |
| var charstring expect_net_rf_states := ""; |
| for (var integer i := 0; i < NUM_BTS_CFG; i := i + 1) { |
| var charstring expect_bts_rf_states := ""; |
| |
| for (var integer j := 0; j < c_BtsParams[i].trx_num; j := j + 1) { |
| expect_bts_rf_states := expect_bts_rf_states & |
| int2str(i) & "," & int2str(j) & ","; |
| if (i < NUM_BTS) { |
| /* In these tests, OML for the first NUM_BTS are always connected via osmo-bts-omldummy */ |
| expect_bts_rf_states := expect_bts_rf_states & "operational,unlocked,"; |
| } else { |
| /* For remaining i < NUM_BTS_CFG, OML is not connected, i.e. inoperational */ |
| expect_bts_rf_states := expect_bts_rf_states & "inoperational,locked,"; |
| } |
| /* The RF policy is still global in osmo-bsc, i.e. always "on" */ |
| expect_bts_rf_states := expect_bts_rf_states & "on,"; |
| if (i < nr_bts) { |
| /* For BTS where RSL is connected, the RSL state will be "up" */ |
| expect_bts_rf_states := expect_bts_rf_states & "rsl-up;"; |
| } else { |
| expect_bts_rf_states := expect_bts_rf_states & "rsl-down;"; |
| } |
| } |
| |
| f_ctrl_get_exp(IPA_CTRL, "bts." & int2str(i) & ".rf_states", expect_bts_rf_states); |
| expect_net_rf_states := expect_net_rf_states & expect_bts_rf_states; |
| } |
| f_ctrl_get_exp(IPA_CTRL, "rf_states", expect_net_rf_states); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify that when 1 BTS is connected, that num_{bts,trx}:*_connected reports 1. */ |
| private function f_tc_stat_num_bts_connected_1(charstring id) runs on MSC_ConnHdlr { |
| f_tc_stat_num_bts_connected_msc_connhdlr(1); |
| } |
| testcase TC_stat_num_bts_connected_1() runs on test_CT { |
| f_tc_stat_num_bts_connected_test_ct(refers(f_tc_stat_num_bts_connected_1), 1); |
| } |
| |
| /* Verify that when 2 BTS is connected, that num_{bts,trx}:*_connected reports 2. */ |
| private function f_tc_stat_num_bts_connected_2(charstring id) runs on MSC_ConnHdlr { |
| f_tc_stat_num_bts_connected_msc_connhdlr(2); |
| } |
| testcase TC_stat_num_bts_connected_2() runs on test_CT { |
| f_tc_stat_num_bts_connected_test_ct(refers(f_tc_stat_num_bts_connected_2), 2); |
| } |
| |
| /* Verify that when 3 BTS is connected, that num_{bts,trx}:*_connected reports 3. */ |
| private function f_tc_stat_num_bts_connected_3(charstring id) runs on MSC_ConnHdlr { |
| f_tc_stat_num_bts_connected_msc_connhdlr(3); |
| } |
| testcase TC_stat_num_bts_connected_3() runs on test_CT { |
| f_tc_stat_num_bts_connected_test_ct(refers(f_tc_stat_num_bts_connected_3), 3); |
| } |
| |
| testcase TC_ctrl() runs on test_CT { |
| var charstring ctrl_resp; |
| |
| f_init(1); |
| |
| /* all below values must match the osmo-bsc.cfg config file used */ |
| |
| f_ctrl_get_exp(IPA_CTRL, "mcc", "001"); |
| f_ctrl_get_exp(IPA_CTRL, "mnc", "01"); |
| f_ctrl_get_exp(IPA_CTRL, "number-of-bts", "4"); |
| |
| var integer bts_nr := 0; |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "location-area-code", "1"); |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "cell-identity", "0"); |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "oml-connection-state", "connected"); |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "gprs-mode", "gprs"); |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "rf_state", "operational,unlocked,on"); |
| f_ctrl_get_exp_trx(IPA_CTRL, bts_nr, 0, "arfcn", "871"); |
| f_ctrl_get_exp_trx(IPA_CTRL, bts_nr, 0, "max-power-reduction", "20"); |
| |
| var integer uptime := str2int(f_ctrl_get_bts(IPA_CTRL, bts_nr, "oml-uptime")); |
| f_sleep(2.0); |
| if (str2int(f_ctrl_get_bts(IPA_CTRL, bts_nr, "oml-uptime")) < uptime+1) { |
| setverdict(fail, "oml-uptime not incrementing as expected"); |
| } |
| /* TODO: Disconnect RSL, imply that OML is disconnected and check for uptime zero? */ |
| |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bsc", 0, "paging:attempted", 0); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify that Upon receival of SET "location", BSC forwards a TRAP |
| "location-state" over the SCCPlite IPA conn */ |
| testcase TC_ctrl_location() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var integer bts_nr := 0; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrl_set_bts(IPA_CTRL, bts_nr, "location", "1234567,fix3d,0.340000,0.560000,0.780000"); |
| f_ctrl_exp_trap(SCCPLITE_IPA_CTRL, "bts." & int2str(bts_nr) & ".location-state", |
| "1234567,fix3d,0.340000,0.560000,0.780000,operational,unlocked,on,001,01"); |
| |
| f_ctrl_set(SCCPLITE_IPA_CTRL, "rf_locked", "1"); |
| f_sleep(2.0); |
| |
| f_ctrl_set_bts(IPA_CTRL, bts_nr, "location", "1234888,fix3d,0.350000,0.570000,0.790000"); |
| f_ctrl_exp_trap(SCCPLITE_IPA_CTRL, "bts." & int2str(bts_nr) & ".location-state", |
| "1234888,fix3d,0.350000,0.570000,0.790000,operational,locked,off,001,01"); |
| |
| /* should match the one from config */ |
| f_ctrl_set(SCCPLITE_IPA_CTRL, "rf_locked", "0"); |
| |
| f_shutdown_helper(); |
| } |
| |
| |
| /*********************************************************************** |
| * Paging Testing |
| ***********************************************************************/ |
| |
| type record Cell_Identity { |
| GsmMcc mcc, |
| GsmMnc mnc, |
| GsmLac lac, |
| GsmCellId ci |
| }; |
| private const Cell_Identity cid := { '001'H, '01'H, 1, 0 }; |
| private const Cell_Identity unknown_cid := { '678'H, 'f90'H, 1, 0 }; |
| |
| type set of integer BtsIdList; |
| |
| private function f_bts_in_list(integer bts_id, BtsIdList bts_ids) return boolean { |
| for (var integer j := 0; j < sizeof(bts_ids); j := j + 1) { |
| if (bts_id == bts_ids[j]) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /* core paging test helper function; used by most paging test cases */ |
| private function f_pageing_helper(hexstring imsi, |
| template BSSMAP_FIELD_CellIdentificationList cid_list, |
| BtsIdList bts_ids := { 0 }, |
| template RSL_ChanNeeded rsl_chneed := omit, |
| template (omit) OCT4 tmsi := omit) runs on test_CT |
| { |
| var template BSSMAP_IE_ChannelNeeded bssmap_chneed; |
| var template MobileIdentityV mi; |
| var RSL_Message rx_rsl; |
| var integer paging_group := hex2int(imsi[lengthof(imsi)-1]); |
| var integer i; |
| |
| f_init(); |
| |
| /* Clear the queue, it might still contain stuff like BCCH FILLING */ |
| for (i := 0; i < NUM_BTS; i := i + 1) { |
| IPA_RSL[i][0].clear; |
| } |
| |
| if (isvalue(rsl_chneed)) { |
| /* The values of 08.08 3.2.2.36 and 08.58 9.3.40 are luckily identical */ |
| bssmap_chneed := ts_BSSMAP_IE_ChanNeeded(int2bit(enum2int(valueof(rsl_chneed)),2)); |
| } else { |
| bssmap_chneed := omit; |
| } |
| |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[0].sccp_addr_peer, g_bssap[0].sccp_addr_own, |
| ts_BSSMAP_Paging(imsi, cid_list, tmsi, bssmap_chneed))); |
| |
| if (not istemplatekind(tmsi, "omit")) { |
| mi := t_MI_TMSI(tmsi); |
| } else { |
| mi := tr_MI_IMSI(imsi); |
| } |
| |
| for (i := 0; i < sizeof(bts_ids); i := i + 1) { |
| rx_rsl := f_exp_ipa_rx(tr_RSL_PAGING_CMD(mi), idx := {bts_ids[i], 0}); |
| /* check channel type, paging group */ |
| if (rx_rsl.ies[1].body.paging_group != paging_group) { |
| setverdict(fail, "Paging for wrong paging group"); |
| } |
| if (ispresent(rsl_chneed) and |
| rx_rsl.ies[3].body.chan_needed.chan_needed != valueof(rsl_chneed)) { |
| setverdict(fail, "RSL Channel Needed != BSSMAP Channel Needed"); |
| } |
| } |
| f_sleep(2.0); |
| /* do a quick check on all not-included BTSs if they received paging */ |
| for (i := 0; i < NUM_BTS; i := i + 1) { |
| timer T := 0.1; |
| if (f_bts_in_list(i, bts_ids)) { |
| continue; |
| } |
| T.start; |
| alt { |
| [] IPA_RSL[i][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(mi))) { |
| setverdict(fail, "Paging on BTS ", i, " which is not part of ", bts_ids); |
| } |
| [] IPA_RSL[i][0].receive { repeat; } |
| [] T.timeout { } |
| } |
| } |
| |
| setverdict(pass); |
| } |
| |
| const BtsIdList c_BtsId_all := { 0, 1, 2 }; |
| const BtsIdList c_BtsId_none := { }; |
| const BtsIdList c_BtsId_LAC1 := { 0, 1 }; |
| const BtsIdList c_BtsId_LAC2 := { 2 }; |
| |
| /* PAGING by IMSI + TMSI */ |
| testcase TC_paging_imsi_nochan() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010100000001'H, cid_list, c_BtsId_all, omit, omit); |
| f_shutdown_helper(); |
| } |
| |
| /* PAGING by IMSI + TMSI */ |
| testcase TC_paging_tmsi_nochan() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010100000001'H, cid_list, c_BtsId_all, omit, 'A1B2C301'O); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging with different "channel needed' values */ |
| testcase TC_paging_tmsi_any() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010100000002'H, cid_list, c_BtsId_all, RSL_CHANNEED_ANY, 'A1B2C302'O); |
| f_shutdown_helper(); |
| } |
| testcase TC_paging_tmsi_sdcch() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010100000003'H, cid_list, c_BtsId_all, RSL_CHANNEED_SDCCH, 'A1B2C303'O); |
| f_shutdown_helper(); |
| } |
| testcase TC_paging_tmsi_tch_f() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010000000004'H, cid_list, c_BtsId_all, RSL_CHANNEED_TCH_F, 'A1B2C304'O); |
| f_shutdown_helper(); |
| } |
| testcase TC_paging_tmsi_tch_hf() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010000000005'H, cid_list, c_BtsId_all, RSL_CHANNEED_TCH_ForH, 'A1B2C305'O); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by CGI */ |
| testcase TC_paging_imsi_nochan_cgi() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_CGI := { ts_BSSMAP_CI_CGI(cid.mcc, cid.mnc, cid.lac, cid.ci) } }; |
| f_pageing_helper('001010000000006'H, cid_list, { 0 }); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by LAC+CI */ |
| testcase TC_paging_imsi_nochan_lac_ci() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC_CI := { ts_BSSMAP_CI_LAC_CI(cid.lac, cid.ci) } }; |
| f_pageing_helper('001010000000007'H, cid_list, { 0 }); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by CI */ |
| testcase TC_paging_imsi_nochan_ci() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_CI := { ts_BSSMAP_CI_CI(cid.ci) } }; |
| f_pageing_helper('001010000000008'H, cid_list, { 0 }); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by LAI */ |
| testcase TC_paging_imsi_nochan_lai() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAI := { ts_BSSMAP_CI_LAI(cid.mcc, cid.mnc, cid.lac) } }; |
| f_pageing_helper('001010000000009'H, cid_list, c_BtsId_LAC1); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by LAC */ |
| testcase TC_paging_imsi_nochan_lac() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC := { ts_BSSMAP_CI_LAC(cid.lac) } }; |
| f_pageing_helper('001010000000010'H, cid_list, c_BtsId_LAC1); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by "all in BSS" */ |
| testcase TC_paging_imsi_nochan_all() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_allInBSS := ''O }; |
| f_pageing_helper('001010000000011'H, cid_list, c_BtsId_all); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by PLMN+LAC+RNC; We do not implement this; Verify nothing is paged */ |
| testcase TC_paging_imsi_nochan_plmn_lac_rnc() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_PLMN_LAC_RNC := { ts_BSSMAP_CI_PLMN_LAC_RNC(cid.mcc, cid.mnc, cid.lac, 12) } }; |
| f_pageing_helper('001010000000012'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by RNC; We do not implement this; Verify nothing is paged */ |
| testcase TC_paging_imsi_nochan_rnc() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_RNC := { int2oct(13, 2) } }; |
| f_pageing_helper('001010000000013'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by LAC+RNC; We do not implement; Verify nothing is paged */ |
| testcase TC_paging_imsi_nochan_lac_rnc() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC_RNC := { ts_BSSMAP_CI_LAC_RNC(cid.lac, 14) } }; |
| f_pageing_helper('001010000000014'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging on multiple cells (multiple entries in list): Verify all of them page */ |
| testcase TC_paging_imsi_nochan_lacs() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC := { ts_BSSMAP_CI_LAC(1), ts_BSSMAP_CI_LAC(2) } }; |
| f_pageing_helper('001010000000015'H, cid_list, c_BtsId_all); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging on empty list: Verify none of them page */ |
| testcase TC_paging_imsi_nochan_lacs_empty() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC := { } }; |
| f_pageing_helper('001010000000016'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by CGI with unknown MCC/MNC: Verify nothing is paged. */ |
| testcase TC_paging_imsi_nochan_cgi_unknown_cid() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_CGI := { ts_BSSMAP_CI_CGI(unknown_cid.mcc, unknown_cid.mnc, unknown_cid.lac, unknown_cid.ci) } }; |
| f_pageing_helper('001010000000006'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Verify paging retransmission interval + count */ |
| /* Verify paging stops after channel establishment */ |
| /* Test behavior under paging overload */ |
| |
| /* Verify PCH load */ |
| testcase TC_paging_imsi_load() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| timer T := 4.0; |
| timer T_retrans := 1.0; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010123456789'H, cid_list, c_BtsId_all); |
| |
| /* tell BSC there is no paging space anymore */ |
| f_ipa_tx(ts_RSL_PAGING_LOAD_IND(0)); |
| f_sleep(0.2); |
| IPA_RSL[0][0].clear; |
| |
| /* Wait for 4 seconds if any more PAGING CMD are received on RSL. Normally, |
| * there would be 8 retransmissions during 4 seconds */ |
| T.start; |
| T_retrans.start; |
| alt { |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { |
| setverdict(fail, "Received PAGING after LOAD_IND(0)"); |
| mtc.stop; |
| } |
| [] T_retrans.timeout { |
| /* re-trnsmit the zero-space LOAD IND to avoid BSC 'auto credit' */ |
| f_ipa_tx(ts_RSL_PAGING_LOAD_IND(0)); |
| T_retrans.start; |
| repeat; |
| } |
| [] T.timeout { |
| setverdict(pass); |
| } |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify Paging Counter */ |
| testcase TC_paging_counter() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| timer T := 4.0; |
| var integer i; |
| var integer paging_attempted_bsc; |
| var integer paging_attempted_bts[NUM_BTS]; |
| var integer paging_expired_bsc; |
| var integer paging_expired_bts[NUM_BTS]; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| |
| f_init(); |
| |
| /* read counters before paging */ |
| paging_attempted_bsc := f_ctrl_get_ratectr_abs(IPA_CTRL, "bsc", 0, "paging:attempted"); |
| if (Misc_Helpers.f_osmo_repo_is("nightly")) { /* osmo-bsc > 1.8.0 */ |
| paging_expired_bsc := f_ctrl_get_ratectr_abs(IPA_CTRL, "bsc", 0, "paging:expired"); |
| } |
| for (i := 0; i < NUM_BTS; i := i+1) { |
| paging_attempted_bts[i] := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", i, "paging:attempted"); |
| paging_expired_bts[i] := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", i, "paging:expired"); |
| } |
| |
| f_pageing_helper('001230000000001'H, cid_list, c_BtsId_all); |
| |
| /* expect the attempted pages on BSC and each BTSs to have incremented by one */ |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bsc", 0, "paging:attempted", paging_attempted_bsc+1); |
| for (i := 0; i < NUM_BTS; i := i+1) { |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", i, "paging:attempted", |
| paging_attempted_bts[i]+1); |
| } |
| |
| /* assume that 12s later the paging on all BTSs have expired and hence incremented by 1 */ |
| f_sleep(12.0); |
| if (Misc_Helpers.f_osmo_repo_is("nightly")) { /* osmo-bsc > 1.8.0 */ |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bsc", 0, "paging:expired", paging_expired_bsc+1); |
| } |
| for (i := 0; i < NUM_BTS; i := i+1) { |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", i, "paging:expired", |
| paging_expired_bts[i]+1); |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| |
| /* Verify paging stops after A-RESET */ |
| testcase TC_paging_imsi_a_reset() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| timer T := 3.0; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010123456789'H, cid_list, c_BtsId_all); |
| |
| /* Perform a BSSMAP Reset and wait for ACK */ |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[0].sccp_addr_peer, g_bssap[0].sccp_addr_own, ts_BSSMAP_Reset(0, g_osmux_enabled_cn))); |
| alt { |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(g_bssap[0].sccp_addr_own, g_bssap[0].sccp_addr_peer, tr_BSSMAP_ResetAck(g_osmux_enabled_cn))) { } |
| [] BSSAP.receive { repeat; } |
| } |
| |
| /* Wait to avoid a possible race condition if a paging message is |
| * received right before the reset ACK. */ |
| f_sleep(0.2); |
| |
| /* Clear the queue, it might still contain stuff like BCCH FILLING */ |
| for (var integer i := 0; i < sizeof(IPA_RSL); i := i+1) { |
| IPA_RSL[i][0].clear; |
| } |
| |
| /* Wait for 3 seconds if any more PAGING CMD are received on RSL */ |
| T.start; |
| alt { |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { |
| setverdict(fail, "Received PAGING after A-RESET"); |
| mtc.stop; |
| } |
| [] IPA_RSL[1][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { |
| setverdict(fail, "Received PAGING after A-RESET"); |
| mtc.stop; |
| } |
| [] IPA_RSL[2][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { |
| setverdict(fail, "Received PAGING after A-RESET"); |
| mtc.stop; |
| } |
| [] T.timeout { |
| setverdict(pass); |
| } |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify how we handle unsolicited Paging Response. In case of an unsolicit |
| * paging response we can not know which MSC is in charge, so we will blindly |
| * pick the first configured MSC. This behavior is required in order to make |
| * MT-CSFB calls working because in those cases the BSC can not know that the |
| * MSC has already paged the subscriver via SGs. So any MT-CSFB call will look |
| * like an unsolicited Paging Response to the MSC. |
| */ |
| testcase TC_paging_resp_unsol() runs on test_CT { |
| |
| f_init(1); |
| timer T := 5.0; |
| |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var DchanTuple dt; |
| var PDU_ML3_MS_NW l3 := valueof(ts_PAG_RESP(valueof(ts_MI_IMSI_LV('001010008880018'H)))); |
| var octetstring rr_pag_resp := enc_PDU_ML3_MS_NW(l3); |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| dt.rsl_chan_nr := f_chreq_act_ack(); |
| dt.idx := {0, 0}; |
| |
| /* Send unsolicited Paging response (no matching Paging CMD stored in BSC) */ |
| f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), enc_PDU_ML3_MS_NW(l3))); |
| |
| |
| /* Expevct a CR with a matching Paging response on the A-Interface */ |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(rr_pag_resp))) -> value rx_c_ind { |
| setverdict(pass); |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); |
| } |
| [] BSSAP.receive { |
| setverdict(fail, "Received unexpected message on A-Interface!"); |
| } |
| [] T.timeout { |
| setverdict(fail, "Received nothing on A-Interface!"); |
| } |
| } |
| |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| /* Verify BSC can schedule N paging requests under one minute if BTS buffer is good enough */ |
| function f_TC_paging_Nreq(integer num_subscribers, boolean send_pag_load_ind) runs on test_CT { |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| var Hexstrings imsis := {}; |
| var Booleans rx_paging_done := {}; |
| var integer rx_paging_num := 0; |
| var integer i; |
| timer T_rx := 60.0; |
| timer T_load_ind := 1.0; |
| |
| for (i := 0; i < num_subscribers; i := i + 1) { |
| imsis := imsis & {f_gen_imsi(i)}; |
| rx_paging_done := rx_paging_done & { false }; |
| } |
| |
| f_init(1, guard_timeout := 100.0); |
| |
| /* Clear the queue, it might still contain stuff like BCCH FILLING */ |
| IPA_RSL[0][0].clear; |
| if (send_pag_load_ind) { |
| /* Tell there's plenty of space at the BTS (UINT16_MAX): */ |
| f_ipa_tx(ts_RSL_PAGING_LOAD_IND(65535)); |
| } |
| |
| for (i := 0; i < num_subscribers; i := i + 1) { |
| /* Page on LAC-CI of BTS0: */ |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[0].sccp_addr_peer, g_bssap[0].sccp_addr_own, |
| ts_BSSMAP_Paging(imsis[i], valueof(ts_BSSMAP_CIL_LAC_CI({ts_BSSMAP_CI_LAC_CI(1, 0)})), |
| omit, omit))); |
| } |
| |
| T_rx.start; |
| T_load_ind.start; |
| alt { |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?), IPAC_PROTO_RSL_TRX0)) -> value rx_rsl_ud { |
| var hexstring imsi := rx_rsl_ud.rsl.ies[2].body.ms_identity.mobileIdentityV.oddEvenInd_identity.imsi.digits; |
| var hexstring imsi_suffix := substr(imsi, lengthof(imsi)-6, 6); |
| var charstring imsi_str := hex2str(imsi_suffix); |
| var integer imsi_idx := str2int(imsi_str); |
| if (rx_paging_done[imsi_idx] == false) { |
| rx_paging_done[imsi_idx] := true; |
| rx_paging_num := rx_paging_num + 1; |
| } else { |
| setverdict(fail, "Retrans of ", imsi_str, " happened before Rx initial trans for all reqs. rx_paging_num=", rx_paging_num); |
| mtc.stop; |
| } |
| if (rx_paging_num < num_subscribers) { |
| repeat; |
| } |
| } |
| [] IPA_RSL[0][0].receive { repeat; } |
| [] T_load_ind.timeout { |
| log("[CCH Load Ind timer] received paging requests so far: ", rx_paging_num); |
| if (send_pag_load_ind) { |
| f_ipa_tx(ts_RSL_PAGING_LOAD_IND(40)); |
| } |
| T_load_ind.start; |
| repeat; |
| } |
| [] T_rx.timeout { |
| setverdict(fail, "Timeout expecting paging requests, so far ", rx_paging_num); |
| mtc.stop; |
| } |
| } |
| |
| /* Drop OML connection to have all paging requests flushed: */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_shutdown_helper(); |
| } |
| /* Verify BSC can schedule 500 paging requests under one minute if BTS buffer is good enough */ |
| testcase TC_paging_500req() runs on test_CT { |
| f_TC_paging_Nreq(500, true); |
| } |
| /* Same as TC_paging_500req, but without sending CCCH Load Indication, which |
| * means BTS is always under CCH Load Threshold, aka capable of sending tons of requests. |
| * Since No CCCH Load Ind, BSC uses a conservative estimation of BTS load, which |
| * for current config yields ~8req/sec, so 480req/min maximum. */ |
| testcase TC_paging_450req_no_paging_load_ind() runs on test_CT { |
| f_TC_paging_Nreq(450, false); |
| } |
| |
| /* Test RSL link drop causes counter increment */ |
| testcase TC_rsl_drop_counter() runs on test_CT { |
| var integer rsl_fail; |
| |
| f_init(1); |
| |
| rsl_fail := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "rsl_fail"); |
| |
| f_ipa_rsl_stop(bts[0][0].rsl); |
| |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "rsl_fail", rsl_fail+1); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* TODO: Test OML link drop causes counter increment */ |
| |
| /* The body of TC_rsl_unknown_unit_id() and TC_oml_unknown_unit_id() tests. */ |
| function f_ipa_unknown_unit_id(integer mp_bsc_ipa_port) runs on test_CT return boolean { |
| var IPA_Client client; |
| timer T := 10.0; |
| |
| client.id := "IPA-BTS0-TRX0-RSL"; |
| client.vc_IPA := IPA_Emulation_CT.create(client.id & "-IPA") alive; |
| client.ccm_pars := c_IPA_default_ccm_pars; |
| client.ccm_pars.name := "Osmocom TTCN-3 BTS Simulator"; |
| client.ccm_pars.unit_id := "99/0/0"; /* value which is unknown at BTS */ |
| |
| f_ipa_ctrl_start_client(mp_bsc_ip, mp_bsc_ctrl_port); |
| |
| f_init_mgcp(0, "VirtMGW"); |
| |
| /* start RSL/OML connection (XXX re-uses RSL port/protocol definitions for OML) */ |
| map(client.vc_IPA:IPA_PORT, system:IPA); |
| connect(client.vc_IPA:IPA_RSL_PORT, self:IPA_RSL[0][0]); |
| client.vc_IPA.start(IPA_Emulation.main_client(mp_bsc_ip, mp_bsc_ipa_port, "", 10000, client.ccm_pars)); |
| |
| /* wait for IPA OML link to connect and then disconnect */ |
| T.start; |
| alt { |
| [] IPA_RSL[0][0].receive(tr_ASP_IPA_EV(ASP_IPA_EVENT_DOWN)) { |
| T.stop; |
| return true; |
| } |
| [] IPA_RSL[0][0].receive { repeat } |
| [] T.timeout { |
| return false; |
| } |
| } |
| return false; |
| } |
| |
| /* BSC should close an RSL connection from a BTS with unknown unit ID (OS#2714). */ |
| testcase TC_rsl_unknown_unit_id() runs on test_CT { |
| if (f_ipa_unknown_unit_id(mp_bsc_rsl_port)) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, "Timeout RSL waiting for connection to close"); |
| } |
| f_shutdown_helper(); |
| } |
| |
| |
| /* BSC should close an RSL connection from a BTS with unknown unit ID (OS#2714). */ |
| testcase TC_oml_unknown_unit_id() runs on test_CT { |
| if (f_ipa_unknown_unit_id(mp_bsc_oml_port)) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, "Timeout OML waiting for connection to close"); |
| } |
| f_shutdown_helper(); |
| } |
| |
| |
| /*********************************************************************** |
| * "New world" test cases using RSL_Emulation + RAN_Emulation |
| ***********************************************************************/ |
| |
| import from RAN_Emulation all; |
| import from BSSAP_LE_Emulation all; |
| import from RSL_Emulation all; |
| import from MSC_ConnectionHandler all; |
| |
| type function void_fn(charstring id) runs on MSC_ConnHdlr; |
| |
| /* helper function to create and connect a MSC_ConnHdlr component |
| * TODO: allow connecting to TRX1..N, not only TRX0 */ |
| private function f_connect_handler(inout MSC_ConnHdlr vc_conn, integer bssap_idx := 0, integer mgwpool_idx := 0) runs on test_CT { |
| connect(vc_conn:RAN, g_bssap[bssap_idx].vc_RAN:PROC); |
| connect(vc_conn:RSL, bts[0][0].rsl.vc_RSL:CLIENT_PT); |
| connect(vc_conn:RSL_PROC, bts[0][0].rsl.vc_RSL:RSL_PROC); |
| if (isvalue(bts[1][0])) { |
| connect(vc_conn:RSL1, bts[1][0].rsl.vc_RSL:CLIENT_PT); |
| connect(vc_conn:RSL1_PROC, bts[1][0].rsl.vc_RSL:RSL_PROC); |
| } |
| if (isvalue(bts[2][0])) { |
| connect(vc_conn:RSL2, bts[2][0].rsl.vc_RSL:CLIENT_PT); |
| connect(vc_conn:RSL2_PROC, bts[2][0].rsl.vc_RSL:RSL_PROC); |
| } |
| connect(vc_conn:BSSAP, g_bssap[bssap_idx].vc_RAN:CLIENT); |
| if (mp_enable_lcs_tests) { |
| connect(vc_conn:BSSAP_LE, g_bssap_le.vc_BSSAP_LE:CLIENT); |
| connect(vc_conn:BSSAP_LE_PROC, g_bssap_le.vc_BSSAP_LE:PROC); |
| } |
| connect(vc_conn:STATSD_PROC, vc_STATSD:STATSD_PROC); |
| connect(vc_conn:MGCP_PROC, vc_MGCP[mgwpool_idx]:MGCP_PROC); |
| connect(vc_conn:MGCP, vc_MGCP[mgwpool_idx]:MGCP_CLIENT); |
| connect(vc_conn:MGCP_MULTI, vc_MGCP[mgwpool_idx]:MGCP_CLIENT_MULTI); |
| } |
| |
| function f_start_handler_create(template (omit) TestHdlrParams pars := omit) |
| runs on test_CT return MSC_ConnHdlr { |
| var charstring id := testcasename(); |
| var MSC_ConnHdlr vc_conn; |
| var integer bssap_idx := 0; |
| var integer mgwpool_idx := 0; |
| if (isvalue(pars)) { |
| var TestHdlrParams pars_val := valueof(pars); |
| bssap_idx := pars_val.mscpool.bssap_idx; |
| mgwpool_idx := pars_val.mgwpool_idx; |
| } |
| vc_conn := MSC_ConnHdlr.create(id); |
| f_connect_handler(vc_conn, bssap_idx, mgwpool_idx); |
| return vc_conn; |
| } |
| |
| function f_start_handler_run(MSC_ConnHdlr vc_conn, void_fn fn, template (omit) TestHdlrParams pars := omit) |
| runs on test_CT return MSC_ConnHdlr { |
| var charstring id := testcasename(); |
| vc_conn.start(f_handler_init(fn, id, pars)); |
| return vc_conn; |
| } |
| |
| function f_start_handler(void_fn fn, template (omit) TestHdlrParams pars := omit) |
| runs on test_CT return MSC_ConnHdlr { |
| return f_start_handler_run(f_start_handler_create(pars), fn, pars); |
| } |
| |
| /* first function inside ConnHdlr component; sets g_pars + starts function */ |
| private function f_handler_init(void_fn fn, charstring id, template (omit) TestHdlrParams pars := omit) |
| runs on MSC_ConnHdlr { |
| if (isvalue(pars)) { |
| g_pars := valueof(pars); |
| } |
| fn.apply(id); |
| } |
| |
| private function f_vty_encryption_a5(charstring options) runs on test_CT { |
| f_vty_transceive(BSCVTY, "configure terminal"); |
| f_vty_transceive(BSCVTY, "network"); |
| f_vty_transceive(BSCVTY, "encryption a5 " & options); |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| const charstring VTY_A5_DEFAULT := "0 1 3"; |
| |
| private function f_vty_encryption_a5_reset() runs on test_CT { |
| /* keep in sync with docker-playground.git ttcn3-bsc-test/osmo-bsc.cfg */ |
| f_vty_encryption_a5(VTY_A5_DEFAULT); |
| } |
| |
| /* Establish signalling channel (non-assignment case) followed by cipher mode */ |
| private function f_tc_ciph_mode_a5(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeSIGNAL); |
| ass_cmd.pdu.bssmap.assignmentRequest.circuitIdentityCode := omit; |
| ass_cmd.pdu.bssmap.assignmentRequest.aoIPTransportLayer := omit; |
| exp_compl.pdu.bssmap.assignmentComplete.circuitIdentityCode := omit; |
| exp_compl.pdu.bssmap.assignmentComplete.aoIPTransportLayer := omit; |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| testcase TC_ciph_mode_a5_0() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('01'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| testcase TC_ciph_mode_a5_1() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('02'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| /* OS#4975: verify that A5/2 is preferred over A5/0 */ |
| testcase TC_ciph_mode_a5_2_0() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| pars.encr := f_encr_params('05'O, '04'O); /* A5/0 and A5/2 (0x01|0x04)*/ |
| |
| f_init(1, true); |
| f_vty_encryption_a5("0 1 2 3"); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| f_vty_encryption_a5_reset(); |
| f_shutdown_helper(); |
| } |
| /* OS#4975: verify that A5/1 is preferred over A5/2 */ |
| testcase TC_ciph_mode_a5_2_1() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| pars.encr := f_encr_params('06'O, '02'O); /* A5/1 and A5/2 (0x02|0x04)*/ |
| |
| f_init(1, true); |
| f_vty_encryption_a5("1 2"); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| f_vty_encryption_a5_reset(); |
| f_shutdown_helper(); |
| } |
| testcase TC_ciph_mode_a5_3() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('08'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| /* Establish a Signalling channel with A5/4 encryption. */ |
| testcase TC_ciph_mode_a5_4() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('10'O, f_rnd_octstring(8), f_rnd_octstring(16))); |
| |
| f_init(1, true); |
| f_vty_encryption_a5("0 1 3 4"); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| f_vty_encryption_a5_reset(); |
| f_shutdown_helper(); |
| } |
| /* establish initial channel, enable ciphering followed by assignment to ciphered channel */ |
| private function f_tc_assignment_aoip_tla_v6(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(aoip_tla := "::3"); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| testcase TC_assignment_aoip_tla_v6() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_aoip_tla_v6), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| |
| /* establish initial channel, enable ciphering followed by assignment to ciphered channel */ |
| private function f_tc_assignment_fr_a5(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| testcase TC_assignment_fr_a5_0() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('01'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| testcase TC_assignment_fr_a5_1() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('02'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| testcase TC_assignment_fr_a5_3() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('08'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| /* Establish a Signalling channel and re-assign to TCH/F with A5/4 encryption. */ |
| testcase TC_assignment_fr_a5_4() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('10'O, f_rnd_octstring(8), f_rnd_octstring(16))); |
| |
| f_init(1, true); |
| f_vty_encryption_a5("0 1 3 4"); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| f_vty_encryption_a5_reset(); |
| f_shutdown_helper(); |
| } |
| |
| /* Allow only A5/4, but omit the Kc128 IE from MSC's msg. Expect Cipher Mode Reject. */ |
| testcase TC_assignment_fr_a5_4_fail() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.encr := valueof(t_EncrParams('10'O, f_rnd_octstring(8))); // A5/4 support, but Kc128 missing! |
| vc_conn := f_start_handler(refers(f_TC_assignment_a5_not_sup), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* Expect ASSIGNMENT FAIL if mandatory IE is missing */ |
| private function f_tc_assignment_fr_a5_1_codec_missing(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| /* Omit: ass_cmd.pdu.bssmap.assignmentRequest.codecList */ |
| |
| f_establish_fully(ass_cmd, exp_fail); |
| f_perform_clear(); |
| } |
| testcase TC_assignment_fr_a5_1_codec_missing() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5_1_codec_missing)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| private function f_TC_assignment_a5_not_sup(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_ass_cpl := f_gen_exp_compl(); |
| var PDU_BSSAP exp_ass_req := f_gen_ass_req(); |
| |
| exp_ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| exp_ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| /* this is like the beginning of f_establish_fully(), but only up to ciphering reject */ |
| |
| var BSSMAP_FIELD_CodecType codecType; |
| |
| codecType := exp_ass_req.pdu.bssmap.assignmentRequest.codecList.codecElements[0].codecType; |
| f_MscConnHdlr_init(g_pars.media_nr, host_bts, host_mgw_mgcp, codecType); |
| |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| |
| /* Start ciphering, expect Cipher Mode Reject */ |
| f_cipher_mode(g_pars.encr, exp_fail := true); |
| f_perform_clear(); |
| } |
| testcase TC_assignment_fr_a5_not_sup() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.encr := valueof(t_EncrParams('20'O, f_rnd_octstring(8), f_rnd_octstring(16))); |
| vc_conn := f_start_handler(refers(f_TC_assignment_a5_not_sup), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| |
| private function f_tc_assignment_sign(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_compl := tr_BSSMAP_AssignmentComplete(omit, omit); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeSIGNAL); |
| |
| f_statsd_reset(); |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| var StatsDExpects expect := { |
| { name := "TTCN3.bts.0.chreq.total", mtype := "c", min := 1, max := 1}, |
| { name := "TTCN3.bts.0.chreq.successful", mtype := "c", min := 1, max := 1}, |
| { name := "TTCN3.bsc.0.assignment.attempted", mtype := "c", min := 1, max := 1}, |
| { name := "TTCN3.bsc.0.assignment.completed", mtype := "c", min := 1, max := 1} |
| }; |
| f_statsd_expect(expect); |
| f_perform_clear(); |
| } |
| |
| testcase TC_assignment_sign() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_tc_assignment_sign)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /*********************************************************************** |
| * Codec (list) testing |
| ***********************************************************************/ |
| |
| /* check if the given rsl_mode is compatible with the a_elem */ |
| private function f_match_codec(BSSMAP_FIELD_CodecElement a_elem, RSL_IE_ChannelMode rsl_mode) |
| return boolean { |
| select (a_elem.codecType) { |
| case (GSM_FR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_F, RSL_CMOD_SP_GSM1))) { |
| return true; |
| } |
| } |
| case (GSM_HR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_H, RSL_CMOD_SP_GSM1))) { |
| return true; |
| } |
| } |
| case (GSM_EFR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_F, RSL_CMOD_SP_GSM2))) { |
| return true; |
| } |
| } |
| case (FR_AMR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_F, RSL_CMOD_SP_GSM3))) { |
| return true; |
| } |
| } |
| case (HR_AMR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_H, RSL_CMOD_SP_GSM3))) { |
| return true; |
| } |
| } |
| case else { } |
| } |
| return false; |
| } |
| |
| /* check if the given rsl_mode is compatible with the a_list */ |
| private function f_match_codecs(BSSMAP_IE_SpeechCodecList a_list, RSL_IE_ChannelMode rsl_mode) |
| return boolean { |
| for (var integer i := 0; i < sizeof(a_list); i := i+1) { |
| if (f_match_codec(a_list.codecElements[i], rsl_mode)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /* determine BSSMAP_IE_ChannelType from *first* element of BSSMAP_FIELD_CodecElement */ |
| function f_BSSMAP_chtype_from_codec(BSSMAP_FIELD_CodecElement a_elem) |
| return BSSMAP_IE_ChannelType { |
| /* FIXME: actually look at all elements of BSSMAP_IE_SpeechCodecList */ |
| var BSSMAP_IE_ChannelType ret := valueof(ts_BSSMAP_IE_ChannelType); |
| select (a_elem.codecType) { |
| case (GSM_FR) { |
| ret.channelRateAndType := ChRate_TCHF; |
| ret.speechId_DataIndicator := Spdi_TCHF_FR; |
| } |
| case (GSM_HR) { |
| ret.channelRateAndType := ChRate_TCHH; |
| ret.speechId_DataIndicator := Spdi_TCHH_HR; |
| } |
| case (GSM_EFR) { |
| ret.channelRateAndType := ChRate_TCHF; |
| ret.speechId_DataIndicator := Spdi_TCHF_EFR; |
| } |
| case (FR_AMR) { |
| ret.channelRateAndType := ChRate_TCHF; |
| ret.speechId_DataIndicator := Spdi_TCHF_AMR; |
| } |
| case (HR_AMR) { |
| ret.channelRateAndType := ChRate_TCHH; |
| ret.speechId_DataIndicator := Spdi_TCHH_AMR; |
| } |
| case else { |
| setverdict(fail, "Unsupported codec ", a_elem); |
| mtc.stop; |
| } |
| } |
| return ret; |
| } |
| |
| private function f_rsl_chmod_tmpl_from_codec(BSSMAP_FIELD_CodecElement a_elem) |
| return template RSL_IE_Body { |
| var template RSL_IE_Body mode_ie := { |
| chan_mode := { |
| len := ?, |
| reserved := ?, |
| dtx_d := ?, |
| dtx_u := ?, |
| spd_ind := RSL_SPDI_SPEECH, |
| ch_rate_type := -, |
| coding_alg_rate := - |
| } |
| } |
| |
| select (a_elem.codecType) { |
| case (GSM_FR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_F; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM1; |
| } |
| case (GSM_HR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_H; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM1; |
| } |
| case (GSM_EFR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_F; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM2; |
| } |
| case (FR_AMR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_F; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM3; |
| } |
| case (HR_AMR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_H; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM3; |
| } |
| } |
| return mode_ie; |
| } |
| |
| type record CodecListTest { |
| BSSMAP_IE_SpeechCodecList codec_list, |
| charstring id |
| } |
| type record of CodecListTest CodecListTests |
| |
| private function f_TC_assignment_codec(charstring id) runs on MSC_ConnHdlr { |
| f_assignment_codec(id); |
| } |
| |
| private function f_assignment_codec(charstring id, boolean do_perform_clear := true) runs on MSC_ConnHdlr { |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(g_pars.use_osmux_cn); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| |
| /* puzzle together the ASSIGNMENT REQ for given codec[s] */ |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := g_pars.ass_codec_list; |
| exp_compl.pdu.bssmap.assignmentComplete.speechCodec.codecElements[0] := |
| g_pars.ass_codec_list.codecElements[0]; |
| if (isvalue(g_pars.expect_mr_s0_s7)) { |
| exp_compl.pdu.bssmap.assignmentComplete.speechCodec.codecElements[0].s0_7 := |
| g_pars.expect_mr_s0_s7; |
| } |
| } |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := |
| f_BSSMAP_chtype_from_codec(g_pars.ass_codec_list.codecElements[0]); |
| log("expecting ASS COMPL like this: ", exp_compl); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| if (not g_pars.expect_channel_mode_modify) { |
| /* Verify that the RSL-side activation actually matches our expectations */ |
| var RSL_Message rsl := f_rslem_get_last_act(RSL_PROC, 0, g_chan_nr); |
| |
| var RSL_IE_Body mode_ie; |
| if (f_rsl_find_ie(rsl, RSL_IE_CHAN_MODE, mode_ie) == false) { |
| setverdict(fail, "Couldn't find CHAN_MODE IE"); |
| mtc.stop; |
| } |
| var template RSL_IE_Body t_mode_ie := f_rsl_chmod_tmpl_from_codec(g_pars.ass_codec_list.codecElements[0]); |
| if (not match(mode_ie, t_mode_ie)) { |
| log("mode_ie ", mode_ie, " != t_mode_ie ", t_mode_ie); |
| setverdict(fail, "RSL Channel Mode IE doesn't match expectation"); |
| } |
| |
| var RSL_IE_Body mr_conf; |
| if (g_pars.expect_mr_conf_ie != omit) { |
| if (f_rsl_find_ie(rsl, RSL_IE_MR_CONFIG, mr_conf) == false) { |
| setverdict(fail, "Missing MR CONFIG IE in RSL Chan Activ"); |
| mtc.stop; |
| } |
| log("found RSL MR CONFIG IE: ", mr_conf); |
| |
| if (not match(mr_conf, g_pars.expect_mr_conf_ie)) { |
| setverdict(fail, "RSL MR CONFIG IE does not match expectation. ", |
| "Expected: ", g_pars.expect_mr_conf_ie, ", got: ", mr_conf); |
| } |
| } else { |
| if (f_rsl_find_ie(rsl, RSL_IE_MR_CONFIG, mr_conf) == true) { |
| log("found RSL MR CONFIG IE: ", mr_conf); |
| setverdict(fail, "Found MR CONFIG IE in RSL Chan Activ, expecting omit"); |
| mtc.stop; |
| } |
| } |
| } |
| |
| if (do_perform_clear) { |
| f_perform_clear(); |
| } |
| } |
| |
| private function f_TC_assignment_codec_fail(charstring id) runs on MSC_ConnHdlr { |
| |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| |
| /* puzzle together the ASSIGNMENT REQ for given codec[s] */ |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := g_pars.ass_codec_list; |
| } |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := |
| f_BSSMAP_chtype_from_codec(g_pars.ass_codec_list.codecElements[0]); |
| log("expecting ASS FAIL like this: ", exp_fail); |
| |
| f_establish_fully(ass_cmd, exp_fail); |
| f_perform_clear(); |
| } |
| |
| const CounterNameVals counternames_bsc_bts_assignment := { |
| { "assignment:attempted", 0 }, |
| { "assignment:completed", 0 }, |
| { "assignment:stopped", 0 }, |
| { "assignment:no_channel", 0 }, |
| { "assignment:timeout", 0 }, |
| { "assignment:failed", 0 }, |
| { "assignment:error", 0 } |
| }; |
| |
| const CounterNameVals counternames_bts_assignment := { |
| { "assignment:attempted_sign", 0 }, |
| { "assignment:attempted_speech", 0 }, |
| { "assignment:completed_sign", 0 }, |
| { "assignment:completed_speech", 0 }, |
| { "assignment:stopped_sign", 0 }, |
| { "assignment:stopped_speech", 0 }, |
| { "assignment:no_channel_sign", 0 }, |
| { "assignment:no_channel_speech", 0 }, |
| { "assignment:timeout_sign", 0 }, |
| { "assignment:timeout_speech", 0 }, |
| { "assignment:failed_sign", 0 }, |
| { "assignment:failed_speech", 0 }, |
| { "assignment:error_sign", 0 }, |
| { "assignment:error_speech", 0 } |
| }; |
| |
| function f_ctrs_bsc_and_bts_assignment_init(integer bts_count := NUM_BTS) runs on test_CT { |
| var CounterNameVals bts_names := counternames_bsc_bts_assignment & counternames_bts_assignment; |
| f_ctrs_bts_init(bts_count, bts_names); |
| f_ctrs_bsc_init(counternames_bsc_bts_assignment); |
| } |
| |
| testcase TC_assignment_codec_fr() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_assignment_init(1); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted", 1); |
| f_ctrs_bts_add(0, "assignment:attempted_speech", 1); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed", 1); |
| f_ctrs_bts_add(0, "assignment:completed_speech", 1); |
| f_ctrs_bts_verify(); |
| |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_hr() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_assignment_init(1); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR})); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted", 1); |
| f_ctrs_bts_add(0, "assignment:attempted_speech", 1); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed", 1); |
| f_ctrs_bts_add(0, "assignment:completed_speech", 1); |
| f_ctrs_bts_verify(); |
| |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_efr() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecEFR})); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* Allow 5,90k only (current default config) */ |
| private function f_allow_amr_rate_5_90k() runs on test_CT { |
| f_vty_cfg_msc(BSCVTY, 0, { |
| "amr-config 12_2k forbidden", |
| "amr-config 10_2k forbidden", |
| "amr-config 7_95k forbidden", |
| "amr-config 7_40k forbidden", |
| "amr-config 6_70k forbidden", |
| "amr-config 5_90k allowed", |
| "amr-config 5_15k forbidden", |
| "amr-config 4_75k forbidden" |
| }); |
| } |
| |
| /* Allow 4,75k, 5,90k, 4,70k and 12,2k, which are the most common rates |
| * ("Config-NB-Code = 1") */ |
| private function f_allow_amr_rate_4_75k_5_90k_7_40k_12_20k() runs on test_CT { |
| f_vty_cfg_msc(BSCVTY, 0, { |
| "amr-config 12_2k allowed", |
| "amr-config 10_2k forbidden", |
| "amr-config 7_95k forbidden", |
| "amr-config 7_40k allowed", |
| "amr-config 6_70k forbidden", |
| "amr-config 5_90k allowed", |
| "amr-config 5_15k forbidden", |
| "amr-config 4_75k allowed" |
| }); |
| } |
| |
| private function f_vty_amr_start_mode_set(boolean fr, charstring startmode) runs on test_CT { |
| var charstring tch; |
| if (fr) { |
| tch := "tch-f"; |
| } else { |
| tch := "tch-h"; |
| } |
| f_vty_cfg_bts(BSCVTY, 0, { "amr " & tch & " start-mode " & startmode }); |
| } |
| |
| /* Set the AMR start-mode for this TCH back to the default configuration. */ |
| private function f_vty_amr_start_mode_restore(boolean fr) runs on test_CT { |
| f_vty_amr_start_mode_set(fr, "auto"); |
| } |
| |
| testcase TC_assignment_codec_amr_f() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| /* Note: This setups the codec configuration. The parameter payload in |
| * mr_conf must be consistant with the parameter codecElements in pars |
| * and also must match the amr-config in osmo-bsc.cfg! */ |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_F})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '01010111'B; |
| pars.expect_mr_conf_ie := c_mr_conf_5_90; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_amr_start_mode_set(true, "1"); |
| f_ctrs_bsc_and_bts_assignment_init(1); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted", 1); |
| f_ctrs_bts_add(0, "assignment:attempted_speech", 1); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed", 1); |
| f_ctrs_bts_add(0, "assignment:completed_speech", 1); |
| f_ctrs_bts_verify(); |
| |
| f_vty_amr_start_mode_restore(true); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_h() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| /* See note above */ |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| pars.expect_mr_conf_ie := c_mr_conf_5_90; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_amr_start_mode_set(false, "1"); |
| f_ctrs_bsc_and_bts_assignment_init(1); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted", 1); |
| f_ctrs_bts_add(0, "assignment:attempted_speech", 1); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed", 1); |
| f_ctrs_bts_add(0, "assignment:completed_speech", 1); |
| f_ctrs_bts_verify(); |
| |
| f_vty_amr_start_mode_restore(false); |
| f_shutdown_helper(); |
| } |
| |
| /* Establish signalling on a TCH/F lchan, and then switch to speech mode without a new Assignment. */ |
| testcase TC_assignment_codec_fr_by_mode_modify() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| /* By disabling all SDCCH, the MS should be given a TCH/F for signalling. Then activating an FR codec should |
| * merely do a Channel Mode Modify, and not assign to a new lchan. f_establish_fully() already accounts for |
| * expecting a Channel Mode Modify if the channel type is compatible. */ |
| f_disable_all_sdcch(); |
| f_disable_all_tch_h(); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| pars.expect_channel_mode_modify := true; |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_enable_all_sdcch(); |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* 'amr start-mode auto' should not keep the (unused) 'smod' bits from previous configuration */ |
| testcase TC_assignment_codec_amr_startmode_cruft() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_F})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '01010111'B; |
| pars.expect_mr_conf_ie := c_mr_conf_5_90; |
| pars.expect_mr_conf_ie.multirate_cfg.icmi := false; /* expect ICMI=0, smod=00: */ |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| /* First set nonzero start mode bits */ |
| f_vty_amr_start_mode_set(true, "4"); |
| /* Now set to auto, and expect the startmode bits to be zero in the message, i.e. ensure that osmo-bsc does not |
| * let the startmode bits stick around and has deterministic MultiRate config for 'start-mode auto'; that is |
| * ensured by above '2004'O, where 'x0xx'O indicates ICMI = 0, spare = 0, smod = 00. */ |
| f_vty_amr_start_mode_set(true, "auto"); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| /* Clear the startmode bits to not affect subsequent tests, in case the bits should indeed stick around. */ |
| f_vty_amr_start_mode_set(true, "1"); |
| f_vty_amr_start_mode_restore(true); |
| f_shutdown_helper(); |
| } |
| |
| function f_TC_assignment_codec_amr(boolean fr, RSL_IE_MultirateCfg mr_cfg, |
| bitstring s8_s0, bitstring exp_s8_s0, |
| charstring start_mode := "1") |
| runs on test_CT { |
| |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| if (fr) { |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_F})); |
| } else { |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| } |
| pars.ass_codec_list.codecElements[0].s0_7 := s8_s0; |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| pars.expect_mr_conf_ie := { multirate_cfg := mr_cfg }; |
| pars.expect_mr_s0_s7 := exp_s8_s0; |
| |
| f_init(1, true); |
| f_allow_amr_rate_4_75k_5_90k_7_40k_12_20k(); |
| f_vty_amr_start_mode_set(fr, start_mode); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| f_allow_amr_rate_5_90k(); |
| f_vty_amr_start_mode_restore(fr); |
| } |
| |
| function f_TC_assignment_codec_amr_fail(boolean fr, bitstring s8_s0) |
| runs on test_CT { |
| |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| if (fr) { |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_F})); |
| } else { |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| } |
| pars.ass_codec_list.codecElements[0].s0_7 := s8_s0; |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| |
| f_init(1, true); |
| f_allow_amr_rate_4_75k_5_90k_7_40k_12_20k(); |
| f_vty_amr_start_mode_set(fr, "1"); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_fail), pars); |
| vc_conn.done; |
| f_allow_amr_rate_5_90k(); |
| f_vty_amr_start_mode_restore(fr); |
| } |
| |
| /* Set S1, we expect an AMR multirate configuration IE with all four rates |
| * set. */ |
| testcase TC_assignment_codec_amr_f_S1() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '10010101'B, |
| params := '20882208'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '00000011'B, '00000010'B); |
| f_shutdown_helper(); |
| } |
| |
| /* Set S1, we expect an AMR multirate configuration IE with the lower three |
| * rates set. */ |
| testcase TC_assignment_codec_amr_h_S1() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00010101'B, |
| params := '208820'O)); |
| f_TC_assignment_codec_amr(false, mr_cfg, '00000010'B, '00000010'B); |
| f_shutdown_helper(); |
| } |
| |
| /* Set S1 and two other rates, we expect an AMR MULTIRATE CONFIGURATION IE with |
| * all four rates (and only S1 set in the ASSIGNMENT COMPLETE) */ |
| testcase TC_assignment_codec_amr_f_S124() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '10010101'B, |
| params := '20882208'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '00010110'B, '00000010'B); |
| f_shutdown_helper(); |
| } |
| |
| /* Set S1 and two other rates, we expect an AMR MULTIRATE CONFIGURATION IE with |
| * all four rates (and only S1 set in the ASSIGNMENT COMPLETE) */ |
| testcase TC_assignment_codec_amr_h_S124() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00010101'B, |
| params := '208820'O)); |
| f_TC_assignment_codec_amr(false, mr_cfg, '00010110'B, '00000010'B); |
| f_shutdown_helper(); |
| } |
| |
| /* The following block of tests selects more and more rates until all four |
| * possible rates are in the active set (full rate) */ |
| testcase TC_assignment_codec_amr_f_S0() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00000001'B)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '00000001'B, '00000001'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S02() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00000101'B, |
| params := '2080'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '00000101'B, '00000101'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S024() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00010101'B, |
| params := '208820'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '00010101'B, '00010101'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S0247() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '10010101'B, |
| params := '20882208'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '10010101'B, '10010101'B); |
| f_shutdown_helper(); |
| } |
| |
| /* The following block of tests selects more and more rates until all three |
| * possible rates are in the active set (half rate) */ |
| testcase TC_assignment_codec_amr_h_S0() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00000001'B)); |
| f_TC_assignment_codec_amr(false, mr_cfg, '00000001'B, '00000001'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_h_S02() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00000101'B, |
| params := '2080'O)); |
| f_TC_assignment_codec_amr(false, mr_cfg, '00000101'B, '00000101'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_h_S024() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00010101'B, |
| params := '208820'O)); |
| f_TC_assignment_codec_amr(false, mr_cfg, '00010101'B, '00010101'B); |
| f_shutdown_helper(); |
| } |
| |
| /* The following block tests what happens when the MSC does offer rate |
| * configurations that are not supported by the BSC. Normally such situations |
| * should not happen because the MSC gets informed by the BSC in advance via |
| * the L3 COMPLETE message which rates are applicable. The MSC should not try |
| * to offer rates that are not applicable anyway. */ |
| |
| testcase TC_assignment_codec_amr_h_S0247() runs on test_CT { |
| /* Try to include 12,2k in into the active set even though the channel |
| * is half rate only. The BSC is expected to remove the 12,0k */ |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '00010101'B, |
| params := '208820'O)); |
| f_TC_assignment_codec_amr(false, mr_cfg, '10010101'B, '00010101'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S01234567() runs on test_CT { |
| /* See what happens when all rates are selected at once. Since then |
| * Also S1 is selected, this setting will be prefered and we should |
| * get 12.2k, 7,40k, 5,90k, and 4,75k in the active set. */ |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '10010101'B, |
| params := '20882208'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '11111111'B, '00000010'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S0234567() runs on test_CT { |
| /* Same as above, but with S1 missing, the MSC is then expected to |
| * select the currently supported rates, which are also 12.2k, 7,40k, |
| * 5,90k, and 4,75k, into the active set. */ |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(codec_modes := '10010101'B, |
| params := '20882208'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '11111101'B, '10010101'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_zero() runs on test_CT { |
| /* Try to select no rates at all */ |
| f_TC_assignment_codec_amr_fail(true, '00000000'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_unsupp() runs on test_CT { |
| /* Try to select only unsupported rates */ |
| f_TC_assignment_codec_amr_fail(true, '01101000'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_h_S7() runs on test_CT { |
| /* Try to select 12,2k for half rate */ |
| f_TC_assignment_codec_amr_fail(false, '10000000'B); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_start_mode_auto() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(icmi := false, |
| codec_modes := '10010101'B, |
| params := '20882208'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '11111111'B, '00000010'B, start_mode := "auto"); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_h_start_mode_auto() runs on test_CT { |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(icmi := false, |
| codec_modes := '00010101'B, |
| params := '208820'O)); |
| f_TC_assignment_codec_amr(false, mr_cfg, '10010101'B, '00010101'B, |
| start_mode := "auto"); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_f_start_mode_4() runs on test_CT { |
| /* "amr tch-f modes 0 2 4 7" => total 4 modes and start mode 4 => '11'B on the wire */ |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(start_mode := 3, |
| codec_modes := '10010101'B, |
| params := '20882208'O)); |
| f_TC_assignment_codec_amr(true, mr_cfg, '11111111'B, '00000010'B, start_mode := "4"); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_assignment_codec_amr_h_start_mode_4() runs on test_CT { |
| /* "amr tch-h modes 0 2 4" => total 3 modes and start mode 4 => '10'B on the wire */ |
| var RSL_IE_MultirateCfg mr_cfg := valueof(ts_RSL_MultirateCfg(start_mode := 2, |
| codec_modes := '00010101'B, |
| params := '208820'O)); |
| f_TC_assignment_codec_amr(false, mr_cfg, '10010101'B, '00010101'B, start_mode := "4"); |
| f_shutdown_helper(); |
| } |
| |
| private function f_disable_all_tch_f() runs on test_CT { |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 1 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 2 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 3 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 4 sub-slot 0 borken"); |
| } |
| |
| private function f_disable_all_tch_h() runs on test_CT { |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 5 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 5 sub-slot 1 borken"); |
| } |
| |
| private function f_enable_all_tch() runs on test_CT { |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 1 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 2 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 3 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 4 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 5 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 5 sub-slot 1 unused"); |
| } |
| |
| private function f_disable_all_sdcch() runs on test_CT { |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 0 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 0 sub-slot 1 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 0 sub-slot 2 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 0 sub-slot 3 borken"); |
| } |
| |
| private function f_enable_all_sdcch() runs on test_CT { |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 0 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 0 sub-slot 1 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 0 sub-slot 2 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 0 sub-slot 3 unused"); |
| } |
| |
| /* Allow HR only */ |
| private function f_TC_assignment_codec_xr_exhausted_req_hr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '09'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '05'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR})); |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| |
| /* Allow FR only */ |
| private function f_TC_assignment_codec_xr_exhausted_req_fr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '08'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '01'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| |
| /* Allow HR only (expect assignment failure) */ |
| private function f_TC_assignment_codec_xr_exhausted_req_hr_fail(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '09'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '05'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR})); |
| f_establish_fully(ass_cmd, exp_fail); |
| f_perform_clear(); |
| } |
| |
| /* Allow FR only (expect assignment failure) */ |
| private function f_TC_assignment_codec_xr_exhausted_req_fr_fail(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '08'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '01'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| f_establish_fully(ass_cmd, exp_fail); |
| f_perform_clear(); |
| } |
| |
| /* Allow FR and HR, but prefer FR */ |
| private function f_TC_assignment_codec_fr_exhausted_req_fr_hr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0A'O; /* Prefer FR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8105'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR, ts_CodecHR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000101'B; /* Expect HR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| |
| /* Allow FR and HR, but prefer HR */ |
| private function f_TC_assignment_codec_fr_exhausted_req_hr_fr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0B'O; /* Prefer HR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8501'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR, ts_CodecFR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000101'B; /* Expect HR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| |
| /* Allow FR and HR, but prefer FR */ |
| private function f_TC_assignment_codec_hr_exhausted_req_fr_hr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0A'O; /* Prefer FR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8105'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR, ts_CodecHR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000001'B; /* Expect FR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| |
| /* Allow FR and HR, but prefer HR */ |
| private function f_TC_assignment_codec_hr_exhausted_req_hr_fr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0B'O; /* Prefer HR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8501'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR, ts_CodecFR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000001'B; /* Expect FR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| |
| /* Request a HR channel while all FR channels are exhausted, this is expected |
| * to work without conflicts */ |
| testcase TC_assignment_codec_fr_exhausted_req_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_f(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_xr_exhausted_req_hr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a FR channel while all FR channels are exhausted, this is expected |
| * to fail. */ |
| testcase TC_assignment_codec_fr_exhausted_req_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_f(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_xr_exhausted_req_fr_fail)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a FR (prefered) or alternatively a HR channel while all FR channels |
| * are exhausted, this is expected to be resolved by selecting a HR channel. */ |
| testcase TC_assignment_codec_fr_exhausted_req_fr_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_f(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_fr_exhausted_req_fr_hr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a HR (prefered) or alternatively a FR channel while all FR channels |
| * are exhausted, this is expected to work without conflicts. */ |
| testcase TC_assignment_codec_fr_exhausted_req_hr_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_f(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_fr_exhausted_req_hr_fr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a FR channel while all HR channels are exhausted, this is expected |
| * to work without conflicts */ |
| testcase TC_assignment_codec_hr_exhausted_req_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_h(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_xr_exhausted_req_fr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a HR channel while all HR channels are exhausted, this is expected |
| * to fail. */ |
| testcase TC_assignment_codec_hr_exhausted_req_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_h(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_xr_exhausted_req_hr_fail)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a HR (prefered) or alternatively a FR channel while all HR channels |
| * are exhausted, this is expected to be resolved by selecting a FR channel. */ |
| testcase TC_assignment_codec_hr_exhausted_req_hr_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_h(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_hr_exhausted_req_hr_fr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a FR (prefered) or alternatively a HR channel while all HR channels |
| * are exhausted, this is expected to work without conflicts. */ |
| testcase TC_assignment_codec_hr_exhausted_req_fr_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_h(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_hr_exhausted_req_fr_hr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Allow FR and HR, but prefer HR */ |
| private function f_TC_assignment_codec_req_hr_fr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0B'O; /* Prefer HR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8501'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR, ts_CodecFR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000101'B; /* Expect HR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| |
| /* Allow FR and HR, but prefer FR */ |
| private function f_TC_assignment_codec_req_fr_hr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0A'O; /* Prefer FR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8105'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR, ts_CodecHR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000001'B; /* Expect FR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| f_perform_clear(); |
| } |
| |
| /* Request a HR (prefered) or alternatively a FR channel, it is expected that |
| * HR, which is the prefered type, is selected. */ |
| testcase TC_assignment_codec_req_hr_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_req_hr_fr)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* Request a FR (prefered) or alternatively a HR channel, it is expected that |
| * FR, which is the prefered type, is selected. */ |
| testcase TC_assignment_codec_req_fr_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_req_fr_hr)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* request a signalling channel with all SDCCH exhausted, it is expected that a TCH will be selected */ |
| private function f_TC_assignment_sdcch_exhausted_req_signalling(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| g_pars.ra := '02'O; /* RA containing reason=LU */ |
| |
| var MobileIdentityLV mi := valueof(ts_MI_IMSI_LV(g_pars.imsi)); |
| var PDU_ML3_MS_NW l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, mi)); |
| var octetstring l3_enc := enc_PDU_ML3_MS_NW(l3_info); |
| var template uint3_t tsc := ?; |
| |
| f_MscConnHdlr_init(g_pars.media_nr, host_bts, host_mgw_mgcp, FR_AMR); |
| f_create_bssmap_exp(l3_enc); |
| /* call helper function for CHAN_RQD -> IMM ASS ->EST_IND */ |
| RSL_Emulation.f_chan_est(g_pars.ra, l3_enc, g_pars.link_id, g_pars.fn, tsc); |
| |
| /* we should now have a COMPL_L3 at the MSC */ |
| timer T := 10.0; |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSMAP_ComplL3); |
| [] T.timeout { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, "Timeout waiting for COMPLETE LAYER 3 INFORMATION"); |
| } |
| } |
| |
| f_perform_clear(); |
| } |
| testcase TC_assignment_sdcch_exhausted_req_signalling() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_disable_all_sdcch(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_sdcch_exhausted_req_signalling)); |
| vc_conn.done; |
| f_enable_all_sdcch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a signalling channel with all SDCCH exhausted, it is |
| expected that no TCH will be selected for signalling and assigment will fail |
| because it's dictated by VTY config */ |
| testcase TC_assignment_sdcch_exhausted_req_signalling_tch_forbidden() runs on test_CT { |
| var RSL_Message rsl_unused, rsl_msg; |
| var GsmRrMessage rr; |
| f_init(1, false); |
| f_sleep(1.0); |
| f_vty_allow_tch_for_signalling(false, 0); |
| f_disable_all_sdcch(); |
| |
| /* RA containing reason=LU */ |
| f_ipa_tx(ts_RSL_CHAN_RQD('02'O, 2342)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| rr := dec_GsmRrMessage(rsl_msg.ies[1].body.full_imm_ass_info.payload); |
| if (rr.header.message_type != IMMEDIATE_ASSIGNMENT_REJECT) { |
| setverdict(fail, "Expected reject"); |
| } |
| |
| f_vty_allow_tch_for_signalling(true, 0); |
| f_enable_all_sdcch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Request a voice channel with all SDCCH exhausted, it is |
| * expected that TCH channel will be allocated since the VTY option is only |
| * aimed at signalling requests */ |
| private function f_TC_assignment_sdcch_exhausted_req_voice_tch_forbidden(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| g_pars.ra := '43'O; /* RA containing reason=originating speech call*/ |
| |
| var MobileIdentityLV mi := valueof(ts_MI_IMSI_LV(g_pars.imsi)); |
| var PDU_ML3_MS_NW l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, mi)); |
| var octetstring l3_enc := enc_PDU_ML3_MS_NW(l3_info); |
| var template uint3_t tsc := ?; |
| |
| f_MscConnHdlr_init(g_pars.media_nr, host_bts, host_mgw_mgcp, FR_AMR); |
| f_create_bssmap_exp(l3_enc); |
| /* call helper function for CHAN_RQD -> IMM ASS ->EST_IND */ |
| RSL_Emulation.f_chan_est(g_pars.ra, l3_enc, g_pars.link_id, g_pars.fn, tsc); |
| |
| /* we should now have a COMPL_L3 at the MSC */ |
| timer T := 10.0; |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSMAP_ComplL3); |
| [] T.timeout { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, "Timeout waiting for COMPLETE LAYER 3 INFORMATION"); |
| } |
| } |
| f_perform_clear(); |
| } |
| testcase TC_assignment_sdcch_exhausted_req_voice_tch_forbidden() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_allow_tch_for_signalling(false, 0); |
| f_disable_all_sdcch(); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_sdcch_exhausted_req_voice_tch_forbidden)); |
| vc_conn.done; |
| |
| f_vty_allow_tch_for_signalling(true, 0); |
| f_enable_all_sdcch(); |
| f_shutdown_helper(); |
| } |
| |
| /* Test Osmux setup BSC<->MSC */ |
| testcase TC_assignment_osmux_cn() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| pars.expect_mr_conf_ie := c_mr_conf_5_90; |
| pars.use_osmux_cn := true; |
| |
| g_osmux_enabled_cn := true; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_amr_start_mode_set(false, "1"); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_vty_amr_start_mode_restore(false); |
| f_shutdown_helper(); |
| } |
| |
| /* Test Osmux setup BTS<->BSC */ |
| testcase TC_assignment_osmux_bts() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| pars.expect_mr_conf_ie := c_mr_conf_5_90; |
| pars.use_osmux_bts := true; |
| |
| g_osmux_enabled_bts := true; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_amr_start_mode_set(false, "1"); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_vty_amr_start_mode_restore(false); |
| f_shutdown_helper(); |
| } |
| |
| /* Test non-AMR codecs still work fine as RTP when Osmux is enabled BTS<->BSC<->MSC */ |
| testcase TC_assignment_codec_hr_osmux_on() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| g_osmux_enabled_cn := true; |
| g_osmux_enabled_bts := true; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_assignment_init(1); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR})); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted", 1); |
| f_ctrs_bts_add(0, "assignment:attempted_speech", 1); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed", 1); |
| f_ctrs_bts_add(0, "assignment:completed_speech", 1); |
| f_ctrs_bts_verify(); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test Osmux setup BTS<->BSC<->MSC */ |
| testcase TC_assignment_osmux() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| pars.expect_mr_conf_ie := c_mr_conf_5_90; |
| pars.use_osmux_cn := true; |
| pars.use_osmux_bts := true; |
| |
| g_osmux_enabled_cn := true; |
| g_osmux_enabled_bts := true; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_amr_start_mode_set(false, "1"); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| |
| f_vty_amr_start_mode_restore(false); |
| f_shutdown_helper(); |
| } |
| |
| /* test the procedure of the MSC requesting a Classmark Update: |
| * a) BSSMAP Classmark Request should result in RR CLASSMARK ENQUIRY, |
| * b) L3 RR CLASSMARK CHANGE should result in BSSMAP CLASSMARK UPDATE */ |
| private function f_tc_classmark(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| |
| BSSAP.send(ts_BSSMAP_ClassmarkRequest); |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_CM_ENQUIRY)); |
| |
| f_rsl_send_l3(ts_RRM_CM_CHG(valueof(ts_CM2))); |
| BSSAP.receive(tr_BSSMAP_ClassmarkUpd(?, omit)); |
| setverdict(pass); |
| |
| f_perform_clear(); |
| } |
| testcase TC_classmark() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_classmark)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* Send a CommonID from the simulated MSC and verify that the information is used to |
| * fill BSC-internal data structures (specifically, bsc_subscr associated with subscr_conn) */ |
| private function f_tc_common_id(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| f_MscConnHdlr_init_vty(); |
| |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| |
| /* Send CommonID */ |
| BSSAP.send(ts_BSSMAP_CommonId(g_pars.imsi)); |
| |
| /* Use VTY to verify that the IMSI of the subscr_conn is set */ |
| var charstring regex := "*(IMSI: " & hex2str(g_pars.imsi) & ")*"; |
| f_vty_transceive_match_regexp_retry(BSCVTY, "show conns", regex, 0, 4, 1.0); |
| |
| setverdict(pass); |
| |
| f_perform_clear(); |
| } |
| testcase TC_common_id() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_common_id)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| private function f_est_single_l3(template PDU_ML3_MS_NW l3) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| |
| /* send the single message we want to send */ |
| f_rsl_send_l3(l3); |
| } |
| |
| private function f_bssap_expect_nothing(float sec := 5.00) runs on MSC_ConnHdlr { |
| timer T := sec; |
| var PDU_BSSAP bssap; |
| T.start; |
| alt { |
| [] BSSAP.receive(PDU_BSSAP:?) -> value bssap { |
| setverdict(fail, "Unexpected BSSMAP ", bssap); |
| mtc.stop; |
| } |
| [] T.timeout { |
| setverdict(pass); |
| } |
| } |
| } |
| |
| /* unsolicited ASSIGNMENT FAIL (without ASSIGN) from MS shouldn't bring BSC down */ |
| private function f_tc_unsol_ass_fail(charstring id) runs on MSC_ConnHdlr { |
| f_est_single_l3(ts_RRM_AssignmentFailure('00'O)); |
| f_bssap_expect_nothing(); |
| f_perform_clear(); |
| } |
| testcase TC_unsol_ass_fail() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_unsol_ass_fail)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| |
| /* unsolicited ASSIGNMENT COMPLETE (without ASSIGN) from MS shouldn't bring BSC down */ |
| private function f_tc_unsol_ass_compl(charstring id) runs on MSC_ConnHdlr { |
| f_est_single_l3(ts_RRM_AssignmentComplete('00'O)); |
| f_bssap_expect_nothing(); |
| f_perform_clear(); |
| } |
| testcase TC_unsol_ass_compl() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_unsol_ass_compl)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| |
| /* unsolicited HANDOVER FAIL (without ASSIGN) from MS shouldn't bring BSC down */ |
| private function f_tc_unsol_ho_fail(charstring id) runs on MSC_ConnHdlr { |
| f_est_single_l3(ts_RRM_HandoverFailure('00'O)); |
| f_bssap_expect_nothing(); |
| f_perform_clear(); |
| } |
| testcase TC_unsol_ho_fail() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_unsol_ho_fail)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| |
| /* short message from MS should be ignored */ |
| private function f_tc_err_82_short_msg(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| |
| /* send short message */ |
| RSL.send(ts_RSL_DATA_IND(g_chan_nr, valueof(ts_RslLinkID_DCCH(0)), ''O)); |
| f_bssap_expect_nothing(); |
| f_perform_clear(); |
| } |
| testcase TC_err_82_short_msg() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_err_82_short_msg)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| |
| /* 24.008 8.4 Unknown message must trigger RR STATUS */ |
| private function f_tc_err_84_unknown_msg(charstring id) runs on MSC_ConnHdlr { |
| f_est_single_l3(ts_RRM_UL_REL('00'O)); |
| timer T := 3.0 |
| alt { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_STATUS)) { |
| setverdict(pass); |
| } |
| [] BSSAP.receive { setverdict(fail, "unexpected BSSAP"); } |
| [] T.timeout { setverdict(fail, "Timeout waiting for RR STATUS"); } |
| } |
| f_perform_clear(); |
| } |
| testcase TC_err_84_unknown_msg() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_err_84_unknown_msg)); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /*********************************************************************** |
| * Handover |
| ***********************************************************************/ |
| |
| /* execute a "bts <0-255> trx <0-255> timeslot <0-7> " command on given Dchan */ |
| private function f_vty_ts_action(charstring suffix, integer bts_nr, integer trx_nr, integer ts_nr) |
| runs on test_CT { |
| var charstring cmd := "bts "&int2str(bts_nr)&" trx "&int2str(trx_nr)& |
| " timeslot "&int2str(ts_nr)&" "; |
| f_vty_transceive(BSCVTY, cmd & suffix); |
| } |
| |
| /* execute a "bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7>" command on given Dchan */ |
| private function f_vty_ss_action(TELNETasp_PT pt, charstring suffix, |
| uint8_t bts_nr, uint8_t trx_nr, |
| in RslChannelNr chan_nr) |
| { |
| /* FIXME: resolve those from component-global state */ |
| var integer ts_nr := chan_nr.tn; |
| var integer ss_nr; |
| if (ischosen(chan_nr.u.ch0)) { |
| ss_nr := 0; |
| } else if (ischosen(chan_nr.u.lm)) { |
| ss_nr := chan_nr.u.lm.sub_chan; |
| } else if (ischosen(chan_nr.u.sdcch4)) { |
| ss_nr := chan_nr.u.sdcch4.sub_chan; |
| } else if (ischosen(chan_nr.u.sdcch8)) { |
| ss_nr := chan_nr.u.sdcch8.sub_chan; |
| } else { |
| setverdict(fail, "Invalid ChanNr ", chan_nr); |
| mtc.stop; |
| } |
| |
| var charstring cmd := "bts "&int2str(bts_nr)&" trx "&int2str(trx_nr)& |
| " timeslot "&int2str(ts_nr)&" sub-slot "&int2str(ss_nr)&" "; |
| f_vty_transceive(pt, cmd & suffix); |
| } |
| |
| /* Even though the VTY command to trigger handover takes a new BTS number as argument, behind the scenes osmo-bsc always |
| * translates that to a target ARFCN+BSIC first. See bsc_vty.c trigger_ho_or_as(), which puts the selected BTS' neighbor |
| * ident key (ARFCN + BSIC) in the struct passed on to handover_request(). handover_start() then resolves that to a |
| * viable actual neighbor cell. So from the internal osmo-bsc perspective, we always request handover to an ARFCN + BSIC |
| * pair, not really to a specific BTS number. */ |
| private function f_vty_handover(TELNETasp_PT pt, uint8_t bts_nr, uint8_t trx_nr, |
| in RslChannelNr chan_nr, uint8_t new_bts_nr) |
| { |
| f_vty_ss_action(pt, "handover " & int2str(new_bts_nr), bts_nr, trx_nr, chan_nr); |
| } |
| |
| /* intra-BSC hand-over between BTS0 and BTS1 */ |
| private function f_tc_ho_int(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| f_bts_0_cfg(BSCVTY, {"neighbor bts 1"}); |
| |
| var HandoverState hs := { |
| rr_ho_cmpl_seen := false, |
| handover_done := false, |
| old_chan_nr := -, |
| expect_target_tsc := c_BtsParams[1].tsc |
| }; |
| /* issue hand-over command on VTY, from BTS 0 to BTS 1 */ |
| f_vty_handover(BSCVTY, 0, 0, g_chan_nr, 1); |
| /* temporarily suspend DChan processing on BTS1 to avoid race with RSLEM_register */ |
| f_rslem_suspend(RSL1_PROC); |
| |
| /* From the MGW perspective, a handover is is characterized by |
| * performing one MDCX operation with the MGW. So we expect to see |
| * one more MDCX during handover. */ |
| g_media.mgcp_conn[0].mdcx_seen_exp := g_media.mgcp_conn[0].crcx_seen_exp + 1; |
| |
| alt { |
| [] as_handover(hs); |
| } |
| |
| /* Since this is an internal handover we expect the BSC to inform the |
| * MSC about the event */ |
| BSSAP.receive(tr_BSSMAP_HandoverPerformed); |
| |
| /* Check the amount of MGCP transactions is still consistant with the |
| * test expectation */ |
| f_check_mgcp_expectations() |
| |
| var RSL_Message chan_act := f_rslem_get_last_act(RSL1_PROC, 0, g_chan_nr); |
| |
| /* Ensure the Channel Activation for the new channel contained the right encryption params. as_handover() set |
| * g_chan_nr to the new lchan that was handed over to. It lives in bts 1, so look it up at RSL1_PROC. */ |
| f_verify_encr_info(chan_act); |
| |
| f_chan_act_verify_tsc(chan_act, c_BtsParams[1].tsc); |
| |
| f_perform_clear(RSL1, RSL1_PROC); |
| |
| f_sleep(0.5); |
| } |
| |
| testcase TC_ho_int() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| f_init(2, true); |
| f_sleep(1.0); |
| |
| pars.expect_tsc := c_BtsParams[0].tsc; |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_int), pars); |
| vc_conn.done; |
| |
| /* from f_establish_fully() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| /* from handover */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:completed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:completed"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:attempted"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| function f_tc_ho_int_a5(OCT1 encr_alg, charstring enc_a5 := "0 1 3") runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams(encr_alg, f_rnd_octstring(8), f_rnd_octstring(16))); |
| |
| f_init(2, true); |
| f_vty_encryption_a5(enc_a5); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_int), pars); |
| vc_conn.done; |
| |
| /* from f_establish_fully() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| /* from handover */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:completed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:completed"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:attempted"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_vty_encryption_a5_reset(); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_ho_int_a5_0() runs on test_CT { |
| f_tc_ho_int_a5('01'O); |
| } |
| |
| testcase TC_ho_int_a5_1() runs on test_CT { |
| f_tc_ho_int_a5('02'O); |
| } |
| |
| testcase TC_ho_int_a5_3() runs on test_CT { |
| f_tc_ho_int_a5('08'O); |
| } |
| |
| testcase TC_ho_int_a5_4() runs on test_CT { |
| f_tc_ho_int_a5('10'O, "0 1 3 4"); |
| } |
| |
| /* intra-BSC hand-over with CONNection FAILure and cause Radio Link Failure: check RR release cause */ |
| private function f_tc_ho_int_radio_link_failure(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| f_bts_0_cfg(BSCVTY, {"neighbor bts 1"}); |
| |
| var HandoverState hs := { |
| rr_ho_cmpl_seen := false, |
| handover_done := false, |
| old_chan_nr := -, |
| expect_target_tsc := c_BtsParams[1].tsc |
| }; |
| /* issue hand-over command on VTY */ |
| f_vty_handover(BSCVTY, 0, 0, g_chan_nr, 1); |
| /* temporarily suspend DChan processing on BTS1 to avoid race with RSLEM_register */ |
| f_rslem_suspend(RSL1_PROC); |
| |
| /* From the MGW perspective, a handover is is characterized by |
| * performing one MDCX operation with the MGW. So we expect to see |
| * one more MDCX during handover. */ |
| g_media.mgcp_conn[0].mdcx_seen_exp := g_media.mgcp_conn[0].crcx_seen_exp + 1; |
| |
| var RSL_Message rsl; |
| var PDU_ML3_NW_MS l3; |
| var RslChannelNr new_chan_nr; |
| var GsmArfcn arfcn; |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr)) -> value rsl { |
| l3 := dec_PDU_ML3_NW_MS(rsl.ies[2].body.l3_info.payload); |
| if (not ischosen(l3.msgs.rrm.handoverCommand)) { |
| setverdict(fail, "Expected handoverCommand"); |
| mtc.stop; |
| } |
| } |
| f_ChDesc2RslChanNr(l3.msgs.rrm.handoverCommand.channelDescription2, |
| new_chan_nr, arfcn); |
| |
| f_rslem_register(0, new_chan_nr, RSL1_PROC); |
| |
| /* resume processing of RSL DChan messages, which was temporarily suspended |
| * before performing a hand-over */ |
| f_rslem_resume(RSL1_PROC); |
| RSL1.receive(tr_RSL_IPA_CRCX(new_chan_nr)); |
| |
| f_sleep(1.0); |
| |
| /* Handover fails because no HANDO DET appears on the new lchan, |
| * and the old lchan reports a Radio Link Failure. */ |
| RSL.send(ts_RSL_CONN_FAIL_IND(g_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| |
| var PDU_BSSAP rx_clear_request; |
| BSSAP.receive(tr_BSSMAP_ClearRequest) -> value rx_clear_request; |
| var BssmapCause cause := bit2int(rx_clear_request.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| var RR_Cause rr_cause := GSM48_RR_CAUSE_ABNORMAL_UNSPEC; |
| |
| var MgcpCommand mgcp; |
| interleave { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE(int2oct(enum2int(rr_cause), 1)))) {} |
| [] RSL.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) {} |
| [] RSL.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)) { |
| RSL.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| f_rslem_unregister(0, g_chan_nr); |
| } |
| [] RSL1.receive(tr_RSL_DEACT_SACCH(new_chan_nr)) {} |
| [] RSL1.receive(tr_RSL_RF_CHAN_REL(new_chan_nr)) { |
| RSL1.send(ts_RSL_RF_CHAN_REL_ACK(new_chan_nr)); |
| f_rslem_unregister(0, g_chan_nr, PT := RSL1_PROC); |
| } |
| [] BSSAP.receive(tr_BSSMAP_ClearComplete) { |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| } |
| } |
| |
| f_sleep(0.5); |
| setverdict(pass); |
| } |
| testcase TC_ho_int_radio_link_failure() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(2, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_int_radio_link_failure)); |
| vc_conn.done; |
| |
| /* from f_establish_fully() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| /* from handover */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:stopped"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:stopped"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:attempted"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:stopped"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* Expecting MGCP to DLCX the endpoint's two connections: towards BTS and towards MSC */ |
| private function f_expect_dlcx_conns() runs on MSC_ConnHdlr { |
| var MgcpCommand mgcp; |
| var template MgcpResponse mgcp_resp; |
| var MGCP_RecvFrom mrf; |
| var template MgcpMessage msg_resp; |
| var template MgcpMessage msg_dlcx := { |
| command := tr_DLCX() |
| } |
| |
| if (g_pars.aoip) { |
| MGCP.receive(tr_DLCX()) -> value mgcp { |
| log("Got first DLCX: ", mgcp); |
| MGCP.send(ts_DLCX_ACK2(mgcp.line.trans_id)); |
| }; |
| |
| MGCP.receive(tr_DLCX()) -> value mgcp { |
| log("Got second DLCX: ", mgcp); |
| MGCP.send(ts_DLCX_ACK2(mgcp.line.trans_id)); |
| }; |
| } else { |
| /* For SCCPLite, BSC doesn't handle the MSC-side */ |
| MGCP_MULTI.receive(tr_MGCP_RecvFrom_any(msg_dlcx)) -> value mrf { |
| log("Got first DLCX: ", mrf.msg.command); |
| msg_resp := { |
| response := ts_DLCX_ACK2(mrf.msg.command.line.trans_id) |
| } |
| MGCP_MULTI.send(t_MGCP_SendToMrf(mrf, msg_resp)); |
| }; |
| } |
| } |
| |
| private function f_ho_out_of_this_bsc(template (omit) BSSMAP_oldToNewBSSIEs exp_oldToNewBSSIEs := omit) runs on MSC_ConnHdlr { |
| |
| var NcellReports neighbor_rep := { |
| { rxlev := 20, bcch_freq := 0, bsic := 11 } |
| }; |
| var octetstring l3_mr := enc_GsmRrL3Message(valueof(ts_MEAS_REP(true, 8, 8, reps := neighbor_rep))); |
| RSL.send(ts_RSL_MEAS_RES(g_chan_nr, 0, ts_RSL_IE_UplinkMeas, ts_RSL_IE_BS_Power(0), ts_RSL_IE_L1Info, |
| l3_mr, 0)); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequired(exp_oldToNewBSSIEs)); |
| |
| f_sleep(0.5); |
| /* The MSC negotiates Handover Request and Handover Request Ack with |
| * the other BSS and comes back with a BSSMAP Handover Command |
| * containing an RR Handover Command coming from the target BSS... */ |
| |
| var PDU_ML3_NW_MS rr_ho_cmd := valueof(ts_RR_HandoverCommand); |
| log("Remote cell's RR Handover Command passed through as L3 Info: ", rr_ho_cmd); |
| var octetstring rr_ho_cmd_enc := enc_PDU_ML3_NW_MS(rr_ho_cmd); |
| log("Remote cell's RR Handover Command passed through as L3 Info, encoded: ", rr_ho_cmd_enc); |
| BSSAP.send(ts_BSSMAP_HandoverCommand(rr_ho_cmd_enc)); |
| |
| /* expect the Handover Command to go out on RR */ |
| var RSL_Message rsl_ho_cmd |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, ?)) -> value rsl_ho_cmd; |
| log("RSL Data Req went out to first BTS: ", rsl_ho_cmd); |
| var RSL_IE_Body rsl_ho_cmd_l3; |
| if (not f_rsl_find_ie(rsl_ho_cmd, RSL_IE_L3_INFO, rsl_ho_cmd_l3)) { |
| log("RSL message contains no L3 Info IE, expected RR Handover Command"); |
| setverdict(fail); |
| } else { |
| log("Found L3 Info: ", rsl_ho_cmd_l3); |
| if (rsl_ho_cmd_l3.l3_info.payload != rr_ho_cmd_enc) { |
| log("FAIL: the BSC sent out a different L3 Info, not matching the RR Handover Command the other BSS forwarded."); |
| setverdict(fail); |
| } else { |
| log("Success: the BSC sent out the same RR Handover Command the other BSS forwarded."); |
| setverdict(pass); |
| } |
| } |
| |
| /* When the other BSS has reported a completed handover, this side is |
| * torn down. */ |
| |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_HANDOVER_SUCCESSFUL; |
| var BssmapCause cause := enum2int(cause_val); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| f_expect_dlcx_conns(); |
| |
| interleave { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE)); |
| [] RSL.receive(tr_RSL_DEACT_SACCH(g_chan_nr)); |
| [] RSL.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)); |
| [] BSSAP.receive(tr_BSSMAP_ClearComplete) { |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| } |
| } |
| setverdict(pass); |
| } |
| |
| private function f_tc_ho_out_of_this_bsc(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_req := f_gen_ass_req(); |
| ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| f_establish_fully(ass_req, exp_compl); |
| |
| f_ho_out_of_this_bsc(); |
| } |
| testcase TC_ho_out_of_this_bsc() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init_vty(); |
| f_bts_0_cfg(BSCVTY, |
| {"neighbor-list mode automatic", |
| "handover 1", |
| "handover algorithm 2", |
| "handover2 window rxlev averaging 1", |
| "no neighbors", |
| "neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_out_of_this_bsc)); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:completed"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_mo_l3_transceive(RSL_DCHAN_PT rsl := RSL, |
| template (value) RslLinkId link_id := ts_RslLinkID_DCCH(0), |
| template (present) OCT1 dlci := ?, |
| octetstring l3 := '0123456789'O) |
| runs on MSC_ConnHdlr { |
| /* The old lchan and conn should still be active. See that arbitrary L3 |
| * is still going through. */ |
| rsl.send(ts_RSL_DATA_IND(g_chan_nr, link_id, l3)); |
| var template PDU_BSSAP exp_data := { |
| discriminator := '1'B, |
| spare := '0000000'B, |
| dlci := dlci, |
| lengthIndicator := lengthof(l3), |
| pdu := { |
| dtap := l3 |
| } |
| }; |
| BSSAP.receive(exp_data); |
| setverdict(pass); |
| } |
| |
| private function f_mt_l3_transceive(RSL_DCHAN_PT rsl := RSL, |
| template (present) RslLinkId link_id := tr_RslLinkID_DCCH(0), |
| template (value) OCT1 dlci := '00'O, |
| octetstring l3 := '0123456789'O) |
| runs on MSC_ConnHdlr { |
| BSSAP.send(PDU_BSSAP:{ |
| discriminator := '1'B, |
| spare := '0000000'B, |
| dlci := dlci, |
| lengthIndicator := lengthof(l3), |
| pdu := { |
| dtap := l3 |
| } |
| }); |
| rsl.receive(tr_RSL_DATA_REQ(g_chan_nr, link_id, l3)); |
| setverdict(pass); |
| } |
| |
| /* BSC asks for inter-BSC HO, but the MSC decides that it won't happen and |
| * simply never sends a BSSMAP Handover Command. */ |
| private function f_tc_ho_out_fail_no_msc_response(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| var PDU_BSSAP ass_req := f_gen_ass_req(); |
| ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| f_establish_fully(ass_req, exp_compl); |
| |
| f_bts_0_cfg(BSCVTY, {"no neighbor lac 99", "neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "handover any to arfcn 123 bsic any"); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequired); |
| |
| /* osmo-bsc should time out 10 seconds after the handover started. |
| * Let's give it a bit extra. */ |
| f_sleep(15.0); |
| |
| f_mo_l3_transceive(); |
| f_sleep(1.0); |
| f_perform_clear(); |
| } |
| testcase TC_ho_out_fail_no_msc_response() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_out_fail_no_msc_response)); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* BSC asks for inter-BSC HO, receives BSSMAP Handover Command, but MS reports |
| * RR Handover Failure. */ |
| private function f_tc_ho_out_fail_rr_ho_failure(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| var PDU_BSSAP ass_req := f_gen_ass_req(); |
| ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| f_establish_fully(ass_req, exp_compl); |
| |
| f_bts_0_cfg(BSCVTY, {"no neighbor lac 99", "neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "handover any to arfcn 123 bsic any"); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequired); |
| |
| f_sleep(0.5); |
| /* The MSC negotiates Handover Request and Handover Request Ack with |
| * the other BSS and comes back with a BSSMAP Handover Command |
| * containing an RR Handover Command coming from the target BSS... */ |
| |
| var PDU_ML3_NW_MS rr_ho_cmd := valueof(ts_RR_HandoverCommand); |
| log("Remote cell's RR Handover Command passed through as L3 Info: ", rr_ho_cmd); |
| var octetstring rr_ho_cmd_enc := enc_PDU_ML3_NW_MS(rr_ho_cmd); |
| log("Remote cell's RR Handover Command passed through as L3 Info, encoded: ", rr_ho_cmd_enc); |
| BSSAP.send(ts_BSSMAP_HandoverCommand(rr_ho_cmd_enc)); |
| |
| /* expect the Handover Command to go out on RR */ |
| var RSL_Message rsl_ho_cmd |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, ?)) -> value rsl_ho_cmd; |
| log("RSL Data Req went out to first BTS: ", rsl_ho_cmd); |
| var RSL_IE_Body rsl_ho_cmd_l3; |
| if (not f_rsl_find_ie(rsl_ho_cmd, RSL_IE_L3_INFO, rsl_ho_cmd_l3)) { |
| log("RSL message contains no L3 Info IE, expected RR Handover Command"); |
| setverdict(fail); |
| } else { |
| log("Found L3 Info: ", rsl_ho_cmd_l3); |
| if (rsl_ho_cmd_l3.l3_info.payload != rr_ho_cmd_enc) { |
| log("FAIL: the BSC sent out a different L3 Info, not matching the RR Handover Command the other BSS forwarded."); |
| setverdict(fail); |
| } else { |
| log("Success: the BSC sent out the same RR Handover Command the other BSS forwarded."); |
| setverdict(pass); |
| } |
| } |
| |
| f_sleep(0.2); |
| f_rsl_send_l3(ts_RRM_HandoverFailure('00'O)); |
| |
| /* Should tell the MSC about the failure */ |
| BSSAP.receive(tr_BSSMAP_HandoverFailure); |
| |
| f_sleep(1.0); |
| |
| f_mo_l3_transceive(); |
| f_sleep(1.0); |
| |
| setverdict(pass); |
| f_sleep(1.0); |
| f_perform_clear(); |
| } |
| testcase TC_ho_out_fail_rr_ho_failure() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_out_fail_rr_ho_failure)); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:failed"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* BSC asks for inter-BSC-out HO, receives BSSMAP Handover Command, but then no reply is received about HO outcome |
| * (neither BSSMAP Clear Command for success nor RR Handover Failure). 48.008 3.1.5.3.3 "Abnormal Conditions" applies |
| * and the lchan is released. */ |
| private function f_tc_ho_out_fail_no_result_after_ho_cmd(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| var PDU_BSSAP ass_req := f_gen_ass_req(); |
| ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| f_establish_fully(ass_req, exp_compl); |
| |
| f_bts_0_cfg(BSCVTY, {"no neighbor lac 99", "neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "handover any to arfcn 123 bsic any"); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequired); |
| |
| f_sleep(0.5); |
| /* The MSC negotiates Handover Request and Handover Request Ack with |
| * the other BSS and comes back with a BSSMAP Handover Command |
| * containing an RR Handover Command coming from the target BSS... */ |
| |
| var PDU_ML3_NW_MS rr_ho_cmd := valueof(ts_RR_HandoverCommand); |
| log("Remote cell's RR Handover Command passed through as L3 Info: ", rr_ho_cmd); |
| var octetstring rr_ho_cmd_enc := enc_PDU_ML3_NW_MS(rr_ho_cmd); |
| log("Remote cell's RR Handover Command passed through as L3 Info, encoded: ", rr_ho_cmd_enc); |
| BSSAP.send(ts_BSSMAP_HandoverCommand(rr_ho_cmd_enc)); |
| |
| /* expect the Handover Command to go out on RR */ |
| var RSL_Message rsl_ho_cmd |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, ?)) -> value rsl_ho_cmd; |
| log("RSL Data Req went out to first BTS: ", rsl_ho_cmd); |
| var RSL_IE_Body rsl_ho_cmd_l3; |
| if (not f_rsl_find_ie(rsl_ho_cmd, RSL_IE_L3_INFO, rsl_ho_cmd_l3)) { |
| log("RSL message contains no L3 Info IE, expected RR Handover Command"); |
| setverdict(fail); |
| } else { |
| log("Found L3 Info: ", rsl_ho_cmd_l3); |
| if (rsl_ho_cmd_l3.l3_info.payload != rr_ho_cmd_enc) { |
| log("FAIL: the BSC sent out a different L3 Info, not matching the RR Handover Command the other BSS forwarded."); |
| setverdict(fail); |
| } else { |
| log("Success: the BSC sent out the same RR Handover Command the other BSS forwarded."); |
| setverdict(pass); |
| } |
| } |
| |
| /* We get neither success nor failure report from the remote BSS. Eventually T8 times out and we run into 3GPP |
| * TS 48.008 3.1.5.3.3 "Abnormal Conditions": Clear Request should go to the MSC, and RR should be released |
| * after Clear Command */ |
| |
| var PDU_BSSAP rx_clear_request; |
| BSSAP.receive(tr_BSSMAP_ClearRequest) -> value rx_clear_request; |
| log("Got BSSMAP Clear Request"); |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := bit2int(rx_clear_request.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| var MgcpCommand mgcp; |
| interleave { |
| [] RSL.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) { |
| log("Got Deact SACCH"); |
| } |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE)) { |
| log("Got RR Release"); |
| } |
| [] RSL.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)) { |
| log("Got RF Chan Rel"); |
| RSL.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| f_rslem_unregister(0, g_chan_nr); |
| } |
| } |
| |
| f_expect_dlcx_conns(); |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_ho_out_fail_no_result_after_ho_cmd() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_out_fail_no_result_after_ho_cmd)); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_ho_into_this_bsc(charstring id, template (omit) BSSMAP_oldToNewBSSIEs oldToNewBSSIEs := omit) runs on MSC_ConnHdlr { |
| var PDU_BSSAP rx_bssap; |
| /* Hack: the proper way would be to wait for the BSSMAP Handover Request ACK and extract the |
| * actual assigned chan_nr from its L3 (RR Handover Command) message. But osmo-bsc starts acting |
| * on the lchan even before we get a chance to evaluate the BSSMAP Handover Request ACK. So we |
| * need to assume that osmo-bsc will activate TS 1 and already set up this lchan's RSL emulation |
| * before we get started. */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| var uint3_t expect_target_tsc := c_BtsParams[0].tsc; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| var default as_media := activate(as_Media()); |
| |
| var PDU_BSSAP ho_req := f_gen_handover_req(aoip_tla := g_pars.host_aoip_tla, |
| cell_id_source := g_pars.cell_id_source, |
| oldToNewBSSIEs := oldToNewBSSIEs, |
| enc := g_pars.encr); |
| if (g_pars.inter_bsc_ho_in__ho_req_in_initial_sccp_cr) { |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, ho_req)); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| } else { |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, omit)); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| BSSAP.send(ho_req); |
| } |
| |
| alt { |
| [] BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap { |
| if (g_pars.expect_ho_fail) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, |
| "Expected Handover Request to fail, but got Handover Request Ack") |
| } |
| } |
| [] BSSAP.receive(tr_BSSMAP_HandoverFailure) -> value rx_bssap { |
| if (not g_pars.expect_ho_fail) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, |
| "Expected Handover Request to succeed, but got Handover Failure") |
| } |
| // TODO: evaluate correct cause value. But osmo-bsc doesn't seem to send meaningful causes yet! |
| // For now just accept any cause. |
| BSSAP.receive(tr_BSSMAP_ClearRequest); |
| setverdict(pass); |
| return; |
| } |
| } |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| /* we're sure that the channel activation is done now, verify the parameters in it */ |
| var RSL_Message chan_act := f_rslem_get_last_act(RSL_PROC, 0, g_chan_nr); |
| f_verify_encr_info(chan_act); |
| f_chan_act_verify_tsc(chan_act, expect_target_tsc); |
| |
| if (ispresent(rx_bssap.pdu.bssmap.handoverRequestAck.codecList)) { |
| if (not g_pars.aoip) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, |
| "handoverRequestAck: Expected no Speech Codec List (BSS Supported), because this is not AoIP"); |
| } |
| /* TODO: check actual codecs? */ |
| } else { |
| if (g_pars.aoip) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, |
| "handoverRequestAck: Expected Speech Codec List (BSS Supported), but none found"); |
| } |
| } |
| |
| if (ispresent(rx_bssap.pdu.bssmap.handoverRequestAck.speechCodec)) { |
| if (not g_pars.aoip) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, |
| "handoverRequestAck: Expected no Speech Codec (Chosen), because this is not AoIP"); |
| } |
| /* TODO: check actual codec? */ |
| } else { |
| if (g_pars.aoip) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, |
| "handoverRequestAck: Expected Speech Codec (Chosen), but none found"); |
| } |
| } |
| |
| var octetstring ho_command_str; |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| var uint3_t got_tsc := rr_chan_desc_tsc(ho_command.msgs.rrm.handoverCommand.channelDescription2); |
| if (not match(got_tsc, expect_target_tsc)) { |
| setverdict(fail, "RR Handover Command: unexpected TSC in Channel Description: expected ", |
| expect_target_tsc, " got ", got_tsc); |
| mtc.stop; |
| } else { |
| log("handoverCommand: verified TSC = ", got_tsc); |
| } |
| |
| /* Check the Cipher Mode Setting IE (shall be present during inter-RAT handover) */ |
| if (ispresent(ho_command.msgs.rrm.handoverCommand.cipherModeSetting)) { |
| var CipherModeSetting_TV cms := ho_command.msgs.rrm.handoverCommand.cipherModeSetting; |
| var template (present) CipherModeSetting_TV tr_cms := { |
| sC := '0'B, /* no ciphering by default */ |
| algorithmIdentifier := '000'B, |
| elementIdentifier := ? |
| }; |
| if (ispresent(g_pars.encr) and g_pars.encr.enc_alg_expect != '01'O) { /* A5/N */ |
| tr_cms.algorithmIdentifier := f_cipher_mode_bssmap_to_rr(g_pars.encr.enc_alg_expect); |
| tr_cms.sC := '1'B; |
| } |
| if (not match(cms, tr_cms)) { |
| setverdict(fail, "RR Handover Command: unexpected Cipher Mode Setting IE: ", |
| cms, ", expected: ", tr_cms); |
| } |
| } else { |
| setverdict(fail, "RR Handover Command: Cipher Mode Setting IE is not present"); |
| } |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. Here comes the new MS on |
| * the new lchan with a Handover RACH: */ |
| |
| /* send handover detect */ |
| |
| RSL.send(ts_RSL_HANDO_DET(new_chan_nr)); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverDetect); |
| |
| /* send handover complete over the new channel */ |
| |
| var PDU_ML3_MS_NW l3_tx := valueof(ts_RRM_HandoverComplete('00'O)); |
| RSL.send(ts_RSL_EST_IND(new_chan_nr, valueof(ts_RslLinkID_DCCH(0)), |
| enc_PDU_ML3_MS_NW(l3_tx))); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverComplete); |
| deactivate(as_media); |
| setverdict(pass); |
| } |
| |
| private function f_tc_ho_into_this_bsc(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_ML3_NW_MS exp_rr_rel_tmpl; |
| var template (omit) BSSMAP_oldToNewBSSIEs oldToNewBSSIEs := omit; |
| if (not istemplatekind(g_pars.last_used_eutran_plmn, "omit")) { |
| oldToNewBSSIEs := f_ts_BSSMAP_oldToNewBSSIEs(ts_BSSMAP_LastUsedEUTRANPLMNId(g_pars.last_used_eutran_plmn)); |
| } |
| if (g_pars.exp_fast_return) { |
| exp_rr_rel_tmpl := tr_RRM_RR_RELEASE_CellSelectInd; |
| } else { |
| exp_rr_rel_tmpl := tr_RRM_RR_RELEASE; |
| } |
| f_ho_into_this_bsc(id, oldToNewBSSIEs); |
| if (g_pars.expect_ho_fail) { |
| f_perform_clear_no_lchan(); |
| } else { |
| f_perform_clear(exp_rr_rel_tmpl := exp_rr_rel_tmpl); |
| } |
| setverdict(pass); |
| } |
| function f_tc_ho_into_this_bsc_main(TestHdlrParams pars, charstring vty_a5_cfg := VTY_A5_DEFAULT) runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_vty_encryption_a5(vty_a5_cfg); |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_into_this_bsc), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| if (pars.expect_ho_fail) { |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:failed"); |
| } else { |
| f_ctrs_bsc_and_bts_add(0, "handover:completed"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:completed"); |
| } |
| f_ctrs_bsc_and_bts_verify(); |
| |
| f_vty_encryption_a5_reset(); |
| } |
| |
| testcase TC_ho_into_this_bsc() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| f_tc_ho_into_this_bsc_main(pars); |
| f_shutdown_helper(); |
| } |
| |
| function f_tc_ho_into_this_bsc_a5(TestHdlrEncrParams encr, charstring vty_a5_cfg := VTY_A5_DEFAULT, |
| boolean expect_fail := false) runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := encr; |
| pars.expect_ho_fail := expect_fail; |
| f_tc_ho_into_this_bsc_main(pars, vty_a5_cfg); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_ho_into_this_bsc_a5_0() runs on test_CT { |
| f_tc_ho_into_this_bsc_a5(f_encr_params('01'O)); |
| } |
| |
| testcase TC_ho_into_this_bsc_a5_1() runs on test_CT { |
| f_tc_ho_into_this_bsc_a5(f_encr_params('02'O)); |
| } |
| |
| testcase TC_ho_into_this_bsc_a5_3() runs on test_CT { |
| f_tc_ho_into_this_bsc_a5(f_encr_params('08'O)); |
| } |
| |
| testcase TC_ho_into_this_bsc_a5_4() runs on test_CT { |
| f_tc_ho_into_this_bsc_a5(f_encr_params('10'O, kc128 := true), "3 4"); |
| } |
| |
| /* Report: in inter-BSC incoming handover, when the MSC omits the Chosen Encryption Algorithm IE in the Handover Request |
| * message, then osmo-bsc starts an unencrypted lchan even if A5/0 is not permitted. |
| * |
| * This test verifies that the Encryption Information is present in the Channel Activation when the Chosen Enc Alg is |
| * omitted. |
| * |
| * Related: SYS#5839 |
| */ |
| testcase TC_ho_into_this_bsc_a5_1_3_no_chosen_enc_alg() runs on test_CT { |
| f_tc_ho_into_this_bsc_a5(f_encr_params(alg_permitted := '0a'O, alg_expect := '08'O, alg_chosen := omit)); |
| } |
| |
| testcase TC_ho_into_this_bsc_a5_1_3() runs on test_CT { |
| f_tc_ho_into_this_bsc_a5(f_encr_params(alg_permitted := '0a'O, alg_expect := '08'O)); |
| } |
| |
| /* Send a permitted algo mask that does not intersect with osmo-bsc.cfg */ |
| testcase TC_ho_into_this_bsc_a5_mismatch() runs on test_CT { |
| f_tc_ho_into_this_bsc_a5(f_encr_params(alg_permitted := '18'O, alg_expect := '10'O), "0 1", |
| expect_fail := true); // 0x18 = A5/3 and A5/4 |
| } |
| |
| testcase TC_ho_into_this_bsc_tla_v6() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.host_aoip_tla := "::6"; |
| f_tc_ho_into_this_bsc_main(pars); |
| f_shutdown_helper(); |
| } |
| |
| /* Similar to TC_ho_into_this_bsc, but when in SRVCC, HO Req contains "Old BSS |
| to New BSS Information" IE with "Last Used E-UTRAN PLMN Id", which, when the |
| channel is later released (RR CHannel Release), should trigger inclusion of |
| IE "Cell Selection Indicator after Release of all TCH and SDCCH" with E-UTRAN |
| neighbors. */ |
| testcase TC_srvcc_eutran_to_geran() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.last_used_eutran_plmn := '323454'O; |
| pars.exp_fast_return := true; |
| f_tc_ho_into_this_bsc_main(pars); |
| |
| f_ctrs_bsc_and_bts_add(0, "srvcc:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "srvcc:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* Same as TC_srvcc_eutran_to_geran, but enables ciphering on the target channel. */ |
| testcase TC_srvcc_eutran_to_geran_a5_3() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := f_encr_params('08'O); /* only A5/3 */ |
| pars.last_used_eutran_plmn := '323454'O; |
| pars.exp_fast_return := true; |
| f_tc_ho_into_this_bsc_main(pars); |
| |
| f_ctrs_bsc_and_bts_add(0, "srvcc:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "srvcc:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* Same as TC_srvcc_eutran_to_geran, but test explicitly forbiding fast return |
| on the BTS. As a result, RR Release shouldn't contain the EUTRAN neighbor |
| list when the channel is released. */ |
| testcase TC_srvcc_eutran_to_geran_forbid_fast_return() runs on test_CT { |
| f_init_vty(); |
| f_vty_allow_srvcc_fast_return(true, 0) |
| |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.last_used_eutran_plmn := '323454'O; |
| pars.exp_fast_return := false; |
| f_tc_ho_into_this_bsc_main(pars); |
| f_vty_allow_srvcc_fast_return(false, 0); |
| f_shutdown_helper(); |
| } |
| |
| /* Same as TC_srvcc_eutran_to_geran, but using SAI as serving Cell Identifier. SYS#5838 */ |
| testcase TC_srvcc_eutran_to_geran_src_sai() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.last_used_eutran_plmn := '323454'O; |
| pars.cell_id_source := valueof(ts_CellID_SAI('123456'O, 300, 444)); |
| f_tc_ho_into_this_bsc_main(pars); |
| |
| f_ctrs_bsc_and_bts_add(0, "srvcc:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "srvcc:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_srvcc_eutran_to_geran_ho_out(charstring id) runs on MSC_ConnHdlr { |
| var template (omit) BSSMAP_oldToNewBSSIEs oldToNewBSSIEs; |
| oldToNewBSSIEs := f_ts_BSSMAP_oldToNewBSSIEs(ts_BSSMAP_LastUsedEUTRANPLMNId(g_pars.last_used_eutran_plmn)); |
| f_ho_into_this_bsc(id, oldToNewBSSIEs); |
| f_ho_out_of_this_bsc(oldToNewBSSIEs); |
| setverdict(pass); |
| } |
| |
| private function f_tc_srvcc_eutran_to_geran_ho_out_main(boolean disable_fast_return) |
| runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init_vty(); |
| f_bts_0_cfg(BSCVTY, |
| {"neighbor-list mode automatic", |
| "handover 1", |
| "handover algorithm 2", |
| "handover2 window rxlev averaging 1", |
| "no neighbors", |
| "neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, true); |
| if (disable_fast_return) { |
| f_vty_allow_srvcc_fast_return(true, 0); |
| } |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| pars.last_used_eutran_plmn := '323454'O; |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_srvcc_eutran_to_geran_ho_out), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted", 2); |
| f_ctrs_bsc_and_bts_add(0, "handover:completed", 2); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted", 1); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:completed", 1); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted", 1); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:completed", 1); |
| |
| f_ctrs_bsc_and_bts_add(0, "srvcc:attempted", 1); |
| f_ctrs_bsc_and_bts_add(0, "srvcc:completed", 1); |
| f_ctrs_bsc_and_bts_verify(); |
| |
| if (disable_fast_return) { |
| f_vty_allow_srvcc_fast_return(false, 0); |
| } |
| f_shutdown_helper(); |
| } |
| |
| /* First, HO into BSC from EUTRAN (SRVCC): HO Request contains "Old BSS to New |
| BSS Information" IE with "Last Used E-UTRAN PLMN Id". |
| Second, HO to another BSC: HO Required contains "Old BSS to New BSS Information" |
| IE with "Last Used E-UTRAN PLMN Id" from first step. */ |
| testcase TC_srvcc_eutran_to_geran_ho_out() runs on test_CT { |
| f_tc_srvcc_eutran_to_geran_ho_out_main(false); |
| } |
| /* Validate subsequent intra-GSM-HO works the same (with OldBSSToNewBSSInfo IE) |
| * independently of fast-reture allowed/forbidden in local BTS */ |
| testcase TC_srvcc_eutran_to_geran_ho_out_forbid_fast_return() runs on test_CT { |
| f_tc_srvcc_eutran_to_geran_ho_out_main(true); |
| } |
| |
| private function f_tc_ho_in_fail_msc_clears(charstring id) runs on MSC_ConnHdlr { |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media()); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* For deterministic test results, give some time for the MGW endpoint to be configured */ |
| f_sleep(1.0); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. In this case, the MS |
| * reports a Handover Failure to the old BSS, which forwards a BSSMAP |
| * Handover Failure to the MSC. The procedure according to 3GPP TS |
| * 48.008 3.1.5.3.2 "Handover Failure" is then that the MSC sends a |
| * BSSMAP Clear Command: */ |
| |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_RADIO_INTERFACE_FAILURE_REVERSION; |
| var BssmapCause cause := enum2int(cause_val); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| f_expect_dlcx_conns(); |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| |
| setverdict(pass); |
| f_sleep(1.0); |
| |
| setverdict(pass); |
| } |
| testcase TC_ho_in_fail_msc_clears() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_in_fail_msc_clears), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:stopped"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:stopped"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_ho_in_fail_msc_clears_after_ho_detect(charstring id) runs on MSC_ConnHdlr { |
| /* Hack: the proper way would be to wait for the BSSMAP Handover Request ACK and extract the |
| * actual assigned chan_nr from its L3 (RR Handover Command) message. But osmo-bsc starts acting |
| * on the lchan even before we get a chance to evaluate the BSSMAP Handover Request ACK. So we |
| * need to assume that osmo-bsc will activate TS 1 and already set up this lchan's RSL emulation |
| * before we get started. */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media()); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. Here comes the new MS on |
| * the new lchan with a Handover RACH: */ |
| |
| /* send handover detect */ |
| |
| RSL.send(ts_RSL_HANDO_DET(new_chan_nr)); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverDetect); |
| |
| /* The MSC chooses to clear the connection now, maybe we got the |
| * Handover RACH on the new cell but the MS still signaled Handover |
| * Failure to the old BSS? */ |
| |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_RADIO_INTERFACE_FAILURE_REVERSION; |
| var BssmapCause cause := enum2int(cause_val); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| f_expect_dlcx_conns(); |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| |
| f_sleep(1.0); |
| } |
| testcase TC_ho_in_fail_msc_clears_after_ho_detect() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_in_fail_msc_clears_after_ho_detect), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:stopped"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:stopped"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* The new BSS's lchan times out before the MSC decides that handover failed. */ |
| private function f_tc_ho_in_fail_no_detect(charstring id) runs on MSC_ConnHdlr { |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media(fail_on_dlcx := false)); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. But the MS never shows up |
| * on the new lchan. */ |
| |
| BSSAP.receive(tr_BSSMAP_HandoverFailure); |
| |
| /* Did osmo-bsc also send a Clear Request? */ |
| timer T := 0.5; |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSMAP_ClearRequest); |
| [] T.timeout { } |
| } |
| |
| /* MSC plays along with a Clear Command (no matter whether osmo-bsc |
| * asked for it, this is a Handover Failure after all). */ |
| |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_RADIO_INTERFACE_FAILURE_REVERSION; |
| var BssmapCause cause := enum2int(cause_val); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| f_expect_dlcx_conns(); |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| |
| f_sleep(1.0); |
| } |
| testcase TC_ho_in_fail_no_detect() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_in_fail_no_detect), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:error"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* Same as f_tc_ho_in_fail_no_detect, but MSC fails to send a Clear Command */ |
| private function f_tc_ho_in_fail_no_detect2(charstring id) runs on MSC_ConnHdlr { |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media(fail_on_dlcx := false)); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. But the MS never shows up |
| * on the new lchan. */ |
| |
| BSSAP.receive(tr_BSSMAP_HandoverFailure); |
| |
| /* MSC plays dumb and sends no Clear Command */ |
| var PDU_BSSAP rx_clear_request; |
| |
| BSSAP.receive(tr_BSSMAP_ClearRequest) -> value rx_clear_request { |
| var BssmapCause cause := bit2int(rx_clear_request.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| }; |
| f_expect_dlcx_conns(); |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| |
| f_sleep(1.0); |
| } |
| testcase TC_ho_in_fail_no_detect2() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_in_fail_no_detect2), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:error"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* An incoming inter-BSC HO can either issue the Handover Request message attached to the initial SCCP N-Connect (as in |
| * the other tests we have so far), or the first CR can be "empty" with the BSSAP request following later. Test the |
| * empty N-Connect case. */ |
| testcase TC_ho_into_this_bsc_sccp_cr_without_bssap() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.inter_bsc_ho_in__ho_req_in_initial_sccp_cr := false; |
| f_tc_ho_into_this_bsc_main(pars); |
| f_shutdown_helper(); |
| } |
| |
| type record of charstring Commands; |
| |
| private function f_bts_0_cfg(TELNETasp_PT pt, Commands cmds := {}) |
| { |
| f_vty_enter_cfg_bts(pt, 0); |
| for (var integer i := 0; i < sizeof(cmds); i := i+1) { |
| f_vty_transceive(pt, cmds[i]); |
| } |
| f_vty_transceive(pt, "end"); |
| } |
| |
| private function f_cs7_inst_0_cfg(TELNETasp_PT pt, Commands cmds := {}) |
| { |
| f_vty_enter_cfg_cs7_inst(pt, 0); |
| for (var integer i := 0; i < sizeof(cmds); i := i+1) { |
| f_vty_transceive(pt, cmds[i]); |
| } |
| f_vty_transceive(pt, "end"); |
| } |
| |
| private function f_probe_for_handover(charstring log_label, |
| charstring log_descr, |
| charstring handover_vty_cmd, |
| boolean expect_handover, |
| boolean is_inter_bsc_handover := false, |
| template uint3_t expect_target_tsc := ?) |
| runs on MSC_ConnHdlr |
| { |
| /* We're going to thwart any and all handover attempts, just be ready to handle (and ignore) handover target |
| * lchans to be established on bts 1 or bts 2. */ |
| f_rslem_suspend(RSL1_PROC); |
| f_rslem_suspend(RSL2_PROC); |
| |
| var RSL_Message rsl; |
| |
| var charstring log_msg := " (expecting handover)" |
| if (not expect_handover) { |
| log_msg := " (expecting NO handover)"; |
| } |
| log("f_probe_for_handover starting: " & log_label & ": " & log_descr & log_msg); |
| f_vty_transceive(BSCVTY, handover_vty_cmd); |
| |
| timer T := 2.0; |
| T.start; |
| |
| alt { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr)) -> value rsl { |
| var PDU_ML3_NW_MS l3 := dec_PDU_ML3_NW_MS(rsl.ies[2].body.l3_info.payload); |
| log("Rx L3 from net: ", l3); |
| if (ischosen(l3.msgs.rrm.handoverCommand)) { |
| var RslChannelNr new_chan_nr; |
| var GsmArfcn arfcn; |
| f_ChDesc2RslChanNr(l3.msgs.rrm.handoverCommand.channelDescription2, |
| new_chan_nr, arfcn); |
| log("Handover to new chan ", new_chan_nr, " on ARFCN ", arfcn); |
| log(l3.msgs.rrm.handoverCommand); |
| |
| /* Verify correct TSC in handoverCommand */ |
| var uint3_t got_tsc := rr_chan_desc_tsc(l3.msgs.rrm.handoverCommand.channelDescription2); |
| if (not match(got_tsc, expect_target_tsc)) { |
| setverdict(fail, "RR Handover Command: unexpected TSC in Channel Description: expected ", |
| expect_target_tsc, " got ", got_tsc); |
| mtc.stop; |
| } else { |
| log("handoverCommand: verified TSC = ", got_tsc, " (matches ", |
| expect_target_tsc, ")"); |
| } |
| |
| /* Need to register for new lchan on new BTS -- it's either bts 1 or bts 2. It doesn't really |
| * matter on which BTS it really is, we're not going to follow through an entire handover |
| * anyway. */ |
| f_rslem_register(0, new_chan_nr, RSL1_PROC); |
| f_rslem_resume(RSL1_PROC); |
| f_rslem_register(0, new_chan_nr, RSL2_PROC); |
| f_rslem_resume(RSL2_PROC); |
| |
| if (expect_handover and not is_inter_bsc_handover) { |
| setverdict(pass); |
| log("f_probe_for_handover(" & log_label & "): Got RSL Handover Command as expected."); |
| } else { |
| setverdict(fail, "f_probe_for_handover(" & log_label & "): Expected none, but got RSL Handover Command. " |
| & log_label & ": " & log_descr); |
| } |
| |
| log("f_probe_for_handover(" & log_label & "): Ending the test: Handover Failure stops the procedure."); |
| /* osmo-bsc has triggered Handover. That's all we need to know for this test, reply with |
| * Handover Failure. */ |
| f_rsl_send_l3(ts_RRM_HandoverFailure('00'O)); |
| |
| /* target BTS is told to release lchan again; don't care which BTS nor what messages. */ |
| f_sleep(0.5); |
| RSL1.clear; |
| RSL2.clear; |
| log("f_probe_for_handover(" & log_label & "): done (got RSL Handover Command)"); |
| break; |
| } else { |
| repeat; |
| } |
| } |
| [] BSSAP.receive(tr_BSSMAP_HandoverRequired) { |
| if (expect_handover and is_inter_bsc_handover) { |
| setverdict(pass); |
| log("f_probe_for_handover(" & log_label & "): Got BSSMAP Handover Required as expected."); |
| } else { |
| setverdict(fail, "f_probe_for_handover(" & log_label & "): Expected none, but got BSSMAP Handover Required. " |
| & log_label & ": " & log_descr); |
| } |
| |
| log("f_probe_for_handover(" & log_label & "): done (got BSSMAP Handover Required)"); |
| |
| /* Note: f_tc_ho_neighbor_config_start() sets T7, the timeout for BSSMAP Handover Required, to |
| * 1 second. There is no legal way to quickly abort a handover after a BSSMAP Handover Required, |
| * setting a short timeout and waiting is the only way. */ |
| log("f_probe_for_handover(" & log_label & "): waiting for inter-BSC HO to time out..."); |
| f_sleep(1.5); |
| log("f_probe_for_handover(" & log_label & "): ...done"); |
| |
| break; |
| } |
| [] T.timeout { |
| if (expect_handover) { |
| setverdict(fail, "f_probe_for_handover(" & log_label & "): Expected Handover, but got none. " |
| & log_label & ": " & log_descr); |
| } else { |
| setverdict(pass); |
| log("f_probe_for_handover(" & log_label & "): Got no Handover, as expected."); |
| } |
| log("f_probe_for_handover(" & log_label & "): done (got no Handover)"); |
| break; |
| } |
| } |
| |
| f_rslem_resume(RSL1_PROC); |
| f_rslem_resume(RSL2_PROC); |
| f_sleep(3.0); |
| RSL.clear; |
| |
| log("f_probe_for_handover(" & log_label & "): done clearing"); |
| } |
| |
| /* Test the effect of various neighbor configuration scenarios: |
| * |
| * To avoid complexity, block off any actual handover operation, and always remain on the lchan at bts 0. |
| * Reconfigure the neighbors for bts 0, trigger a Handover, and probe whether osmo-bsc does or doesn't start HO. |
| */ |
| private function f_tc_ho_neighbor_config_start() runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| /* Establish lchan at bts 0 */ |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| /* Shorten the inter-BSC Handover timeout, to not wait so long for inter-BSC Handovers */ |
| f_vty_enter_cfg_network(BSCVTY); |
| f_vty_transceive(BSCVTY, "timer T7 1"); |
| f_vty_transceive(BSCVTY, "end"); |
| } |
| |
| private function f_tc_ho_neighbor_config_1(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 1. No 'neighbor' config"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors"}); |
| f_probe_for_handover("1.a", "HO to bts 1 works, implicitly listed as neighbor (legacy behavior when none are configured)", |
| "handover any to arfcn 871 bsic 11", |
| true, expect_target_tsc := c_BtsParams[1].tsc); |
| |
| f_probe_for_handover("1.b", "HO to unknown cell does not start", |
| "handover any to arfcn 13 bsic 39", |
| false); |
| |
| f_probe_for_handover("1.c", "HO to 871-12 is ambiguous = error", |
| "handover any to arfcn 871 bsic 12", |
| false); |
| |
| f_probe_for_handover("1.d", "HO to 871-11 still works (verify that this test properly cleans up)", |
| "handover any to arfcn 871 bsic 11", |
| true, expect_target_tsc := c_BtsParams[1].tsc); |
| |
| f_perform_clear(); |
| } |
| testcase TC_ho_neighbor_config_1() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 60.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_handover_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_1)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 1.a */ |
| /* "failed" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by sending a Handover Failure message. */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:attempted"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:failed"); |
| |
| /* 1.b */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 1.c */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 1.d */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:attempted"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:failed"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_ho_neighbor_config_2(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 2. explicit local neighbor: 'neighbor bts 1'"); |
| f_bts_0_cfg(BSCVTY, {"neighbor bts 1"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("2.a", "HO to bts 1 works, explicitly listed as neighbor", |
| "handover any to arfcn 871 bsic 11", |
| true, expect_target_tsc := c_BtsParams[1].tsc); |
| |
| f_probe_for_handover("2.b", "HO to bts 2 doesn't work, not listed as neighbor", |
| "handover any to arfcn 871 bsic 12", |
| false); |
| f_perform_clear(); |
| } |
| testcase TC_ho_neighbor_config_2() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 50.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_handover_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_2)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 2.a */ |
| /* "failed" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by sending a Handover Failure message. */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:attempted"); |
| f_ctrs_bts_add(1, "incoming_intra_bsc_ho:failed"); |
| |
| /* 2.b */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_ho_neighbor_config_3(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 3. explicit local neighbor: 'neighbor bts 2'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor bts 2"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("3.a", "HO to bts 1 doesn't work, not listed as neighbor", |
| "handover any to arfcn 871 bsic 11", |
| false); |
| f_probe_for_handover("3.b", "HO to bts 2 works, explicitly listed as neighbor; no ambiguity because bts 3 is not listed as neighbor", |
| "handover any to arfcn 871 bsic 12", |
| true, expect_target_tsc := c_BtsParams[2].tsc); |
| f_perform_clear(); |
| } |
| testcase TC_ho_neighbor_config_3() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 50.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_handover_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_3)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 3.a */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 3.b */ |
| /* "failed" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by sending a Handover Failure message. */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| f_ctrs_bts_add(2, "incoming_intra_bsc_ho:attempted"); |
| f_ctrs_bts_add(2, "incoming_intra_bsc_ho:failed"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_ho_neighbor_config_4(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 4. explicit remote neighbor: 'neighbor lac 99 arfcn 123 bsic 45'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor lac 99 arfcn 123 bsic 45"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("4.a", "HO to bts 1 doesn't work, not listed as neighbor", |
| "handover any to arfcn 871 bsic 11", |
| false); |
| f_probe_for_handover("4.b", "HO to bts 2 doesn't work, not listed as neighbor", |
| "handover any to arfcn 871 bsic 12", |
| false); |
| f_probe_for_handover("4.c", "HO to 123-45 triggers inter-BSC HO", |
| "handover any to arfcn 123 bsic 45", |
| true, true); |
| f_perform_clear(); |
| } |
| testcase TC_ho_neighbor_config_4() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 50.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_handover_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_4)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 4.a */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 4.b */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 4.c */ |
| /* "timeout" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by timing out after the Handover Required message */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_ho_neighbor_config_5(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 5. explicit remote neighbor re-using ARFCN+BSIC: 'neighbor lac 99 arfcn 871 bsic 12'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor lac 99 arfcn 871 bsic 12"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("5.a", "HO to 871-12 triggers inter-BSC HO (ignoring local cells with same ARFCN+BSIC)", |
| "handover any to arfcn 871 bsic 12", |
| true, true); |
| f_perform_clear(); |
| } |
| testcase TC_ho_neighbor_config_5() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_handover_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_5)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 5 */ |
| /* "timeout" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by timing out after the Handover Required message */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_ho_neighbor_config_6(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 6. config error: explicit local and remote neighbors with ambiguous ARFCN+BSIC:" |
| & " 'neighbor bts 2; neighbor lac 99 arfcn 871 bsic 12'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor bts 2", "neighbor lac 99 arfcn 871 bsic 12"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("6.a", "HO to 871-12 is ambiguous = error", |
| "handover any to arfcn 871 bsic 12", |
| false); |
| f_perform_clear(); |
| } |
| testcase TC_ho_neighbor_config_6() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_handover_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_6)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 6.a */ |
| /* "timeout" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by timing out after the Handover Required message */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_ho_neighbor_config_7(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 7. explicit local and remote neighbors:" |
| & " 'neighbor bts 2; neighbor lac 99 arfcn 123 bsic 45'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor bts 2", "neighbor lac 99 arfcn 123 bsic 45"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("7.a", "HO to 871-12 does HO to bts 2", |
| "handover any to arfcn 871 bsic 12", |
| true, expect_target_tsc := c_BtsParams[2].tsc); |
| f_probe_for_handover("7.b", "HO to 123-45 triggers inter-BSC HO", |
| "handover any to arfcn 123 bsic 45", |
| true, true); |
| f_perform_clear(); |
| } |
| testcase TC_ho_neighbor_config_7() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 50.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_handover_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_7)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 7.a */ |
| /* "failed" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by sending a Handover Failure message. */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| f_ctrs_bts_add(2, "incoming_intra_bsc_ho:attempted"); |
| f_ctrs_bts_add(2, "incoming_intra_bsc_ho:failed"); |
| |
| /* 7.b */ |
| /* "timeout" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by timing out after the Handover Required message */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* OS#3041: Open and close N connections in a normal fashion, and expect no |
| * BSSMAP Reset just because of that. */ |
| testcase TC_bssap_rlsd_does_not_cause_bssmap_reset() runs on test_CT { |
| var default d; |
| var integer i; |
| var DchanTuple dt; |
| |
| f_init(); |
| |
| /* Wait for initial BSSMAP Reset to pass */ |
| f_sleep(4.0); |
| |
| d := activate(no_bssmap_reset()); |
| |
| /* Setup up a number of connections and RLSD them again from the MSC |
| * side. In the buggy behavior, the fourth one triggers BSSMAP Reset. |
| * Let's do it some more times for good measure. */ |
| for (i := 0; i < 4; i := i+1) { |
| /* Since we're doing a lot of runs, give each one a fresh |
| * T_guard from the top. */ |
| T_guard.start; |
| |
| /* Setup a BSSAP connection and clear it right away. This is |
| * the MSC telling the BSC about a planned release, it's not an |
| * erratic loss of a connection. */ |
| dt := f_est_dchan(int2oct(i,1), 23+i, '00010203040506'O); |
| |
| /* MSC disconnects (RLSD). */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| /* In the buggy behavior, a timeout of 2 seconds happens between above |
| * trigger (logs "SIGTRAN connection down, reconnecting...") and the |
| * actual BSSMAP Reset. Wait a bit longer just to make sure. */ |
| f_sleep(4.0); |
| |
| deactivate(d); |
| f_shutdown_helper(); |
| } |
| |
| /* OS#3041: Open and close N connections in a normal fashion, and expect no |
| * BSSMAP Reset just because of that. Invoke the release by a BSSMAP Clear from |
| * the MSC. */ |
| testcase TC_bssmap_clear_does_not_cause_bssmap_reset() runs on test_CT { |
| var default d; |
| var integer i; |
| var DchanTuple dt; |
| var BSSAP_N_DATA_ind rx_di; |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_CALL_CONTROL; |
| var BssmapCause cause := enum2int(cause_val); |
| |
| f_init(); |
| |
| /* Wait for initial BSSMAP Reset to pass */ |
| f_sleep(4.0); |
| |
| d := activate(no_bssmap_reset()); |
| |
| /* Setup up a number of connections and RLSD them again from the MSC |
| * side. In the buggy behavior, the fourth one triggers BSSMAP Reset. |
| * Let's do it some more times for good measure. */ |
| for (i := 0; i < 8; i := i+1) { |
| /* Since we're doing a lot of runs, give each one a fresh |
| * T_guard from the top. */ |
| T_guard.start; |
| |
| /* Setup a BSSAP connection and clear it right away. This is |
| * the MSC telling the BSC about a planned release, it's not an |
| * erratic loss of a connection. */ |
| dt := f_est_dchan(int2oct(i,1), 23+i, '00010203040506'O); |
| |
| /* Instruct BSC to clear channel */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect BSC to disable the channel */ |
| f_exp_chan_rel_and_clear(dt); |
| } |
| |
| /* In the buggy behavior, a timeout of 2 seconds happens between above |
| * trigger (logs "SIGTRAN connection down, reconnecting...") and the |
| * actual BSSMAP Reset. Wait a bit longer just to make sure. */ |
| f_sleep(4.0); |
| |
| deactivate(d); |
| f_shutdown_helper(); |
| } |
| |
| /* OS#3041: Open and close N connections in a normal fashion, and expect no |
| * BSSMAP Reset just because of that. Close connections from the MS side with a |
| * Release Ind on RSL. */ |
| testcase TC_ms_rel_ind_does_not_cause_bssmap_reset() runs on test_CT { |
| var default d; |
| var integer i; |
| var DchanTuple dt; |
| var BSSAP_N_DATA_ind rx_di; |
| var integer j; |
| |
| f_init(); |
| |
| /* Wait for initial BSSMAP Reset to pass */ |
| f_sleep(4.0); |
| |
| d := activate(no_bssmap_reset()); |
| |
| /* Setup up a number of connections and RLSD them again from the MSC |
| * side. In the buggy behavior, the fourth one triggers BSSMAP Reset. |
| * Let's do it some more times for good measure. */ |
| for (i := 0; i < 8; i := i+1) { |
| /* Since we're doing a lot of runs, give each one a fresh |
| * T_guard from the top. */ |
| T_guard.start; |
| |
| /* Setup a BSSAP connection and clear it right away. This is |
| * the MSC telling the BSC about a planned release, it's not an |
| * erratic loss of a connection. */ |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* simulate RLL REL IND */ |
| f_ipa_tx(ts_RSL_REL_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); |
| |
| /* expect Clear Request on MSC side */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_di; |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := bit2int(rx_di.userData.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect BSC to disable the channel */ |
| f_exp_chan_rel_and_clear(dt); |
| } |
| |
| /* In the buggy behavior, a timeout of 2 seconds happens between above |
| * trigger (logs "SIGTRAN connection down, reconnecting...") and the |
| * actual BSSMAP Reset. Wait a bit longer just to make sure. */ |
| f_sleep(4.0); |
| |
| deactivate(d); |
| f_shutdown_helper(); |
| } |
| |
| /*********************************************************************** |
| * IPA style dynamic PDCH |
| ***********************************************************************/ |
| |
| private function f_dyn_ipa_pdch_act(integer bts_nr, integer trx_nr, integer ts_nr, |
| template (omit) RSL_Cause nack := omit) |
| runs on test_CT { |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(ts_nr)); |
| var RSL_Message rsl_unused; |
| /* ask BSC via VTY to activate a given IPA style chan as PDCH */ |
| f_vty_ts_action("pdch activate", bts_nr, trx_nr, ts_nr); |
| /* expect the BSC to issue the related RSL command */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_IPA_PDCH_ACT(chan_nr)); |
| if (istemplatekind(nack, "omit")) { |
| /* respond with a related acknowledgement */ |
| f_ipa_tx(ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); |
| } else { |
| f_ipa_tx(ts_RSL_IPA_PDCH_ACT_NACK(chan_nr, valueof(nack))); |
| } |
| } |
| |
| private function f_dyn_ipa_pdch_deact(integer bts_nr, integer trx_nr, integer ts_nr, |
| template (omit) RSL_Cause nack := omit) |
| runs on test_CT { |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(ts_nr)); |
| var RSL_Message rsl_unused; |
| /* ask BSC via VTY to activate a given IPA style chan as PDCH */ |
| f_vty_ts_action("pdch deactivate", bts_nr, trx_nr, ts_nr); |
| /* expect the BSC to issue the related RSL command */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_IPA_PDCH_DEACT(chan_nr)); |
| if (istemplatekind(nack, "omit")) { |
| /* respond with a related acknowledgement */ |
| f_ipa_tx(ts_RSL_IPA_PDCH_DEACT_ACK(chan_nr)); |
| } else { |
| f_ipa_tx(ts_RSL_IPA_PDCH_DEACT_NACK(chan_nr, valueof(nack))); |
| } |
| } |
| |
| private function f_ts_dyn_mode_get(integer bts_nr, integer trx_nr, integer ts_nr) |
| runs on test_CT return charstring { |
| var charstring cmd, resp; |
| cmd := "show timeslot "&int2str(bts_nr)&" "&int2str(trx_nr)&" "&int2str(ts_nr); |
| return f_vty_transceive_match_regexp_retry(BSCVTY, cmd, "*\((*)\)*", 0, 4, 1.0); |
| } |
| |
| private function f_ts_dyn_mode_assert(integer bts_nr, integer trx_nr, integer ts_nr, |
| template charstring exp) |
| runs on test_CT { |
| var charstring mode := f_ts_dyn_mode_get(bts_nr, trx_nr, ts_nr); |
| if (not match(mode, exp)) { |
| setverdict(fail, "Unexpected TS Mode: ", mode); |
| mtc.stop; |
| } |
| } |
| |
| private function f_ts_set_chcomb(integer bts_nr, integer trx_nr, integer ts_nr, charstring chcomb) |
| runs on test_CT { |
| f_vty_enter_cfg_ts(BSCVTY, bts_nr, trx_nr, ts_nr); |
| f_vty_transceive(BSCVTY, "phys_chan_config " & chcomb); |
| f_vty_transceive(BSCVTY, "end"); |
| } |
| |
| |
| private function f_ts_reset_chcomb(integer bts_nr) runs on test_CT { |
| var integer i; |
| for (i := 0; i < 8; i := i + 1) { |
| f_ts_set_chcomb(bts_nr, 0, i, phys_chan_config[i]); |
| } |
| } |
| |
| private const charstring TCHF_MODE := "TCH/F mode"; |
| private const charstring TCHH_MODE := "TCH/H mode"; |
| private const charstring PDCH_MODE := "PDCH mode"; |
| private const charstring NONE_MODE := "NONE mode"; |
| private const charstring SDCCH8_MODE := "SDCCH8 mode"; |
| |
| /* Test IPA PDCH activation / deactivation triggered by VTY */ |
| testcase TC_dyn_pdch_ipa_act_deact() runs on test_CT { |
| var RSL_Message rsl_unused; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(6)); |
| |
| log("TCH/F_PDCH pchan starts out in TCH/F mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_IPA_PDCH_ACT(chan_nr)); |
| f_ipa_tx(ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); |
| f_sleep(1.0); |
| log("TCH/F_PDCH pchan, PDCH ACT was ACKed, so now in PDCH mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); |
| |
| /* De-activate it via VTY */ |
| f_dyn_ipa_pdch_deact(0, 0, chan_nr.tn); |
| f_sleep(1.0); |
| log("TCH/F_PDCH pchan, PDCH DEACT via VTY, so now back in TCH/F mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| |
| /* re-activate it via VTY */ |
| f_dyn_ipa_pdch_act(0, 0, chan_nr.tn); |
| f_sleep(1.0); |
| log("TCH/F_PDCH pchan, PDCH ACT via VTY, so now in PDCH mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); |
| |
| /* and finally de-activate it again */ |
| f_dyn_ipa_pdch_deact(0, 0, chan_nr.tn); |
| f_sleep(1.0); |
| log("TCH/F_PDCH pchan, PDCH DEACT via VTY, so now back in TCH/F mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test IPA PDCH activation NACK */ |
| testcase TC_dyn_pdch_ipa_act_nack() runs on test_CT { |
| var RSL_Message rsl_unused; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(6)); |
| |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_IPA_PDCH_ACT(chan_nr)); |
| f_ipa_tx(ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); |
| |
| /* De-activate it via VTY */ |
| f_dyn_ipa_pdch_deact(0, 0, chan_nr.tn); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| |
| /* re-activate it via VTY, but fail that; check BSC still assumes TCH/F mode */ |
| f_dyn_ipa_pdch_act(0, 0, chan_nr.tn, RSL_ERR_EQUIPMENT_FAIL); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| f_shutdown_helper(); |
| } |
| |
| |
| /*********************************************************************** |
| * Osmocom style dynamic PDCH |
| ***********************************************************************/ |
| |
| private function f_dyn_osmo_pdch_act(integer bts_nr, integer trx_nr, integer ts_nr, |
| template (omit) RSL_Cause nack := omit) |
| runs on test_CT { |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(ts_nr)); |
| var RSL_Message rsl_unused; |
| /* ask BSC via VTY to activate a given OSMO style chan as PDCH */ |
| /* FIXME: no VTY command to activate Osmocom PDCH !! */ |
| /* expect the BSC to issue the related RSL command */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT(chan_nr, ?)); |
| if (istemplatekind(nack, "omit")) { |
| /* respond with a related acknowledgement */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); |
| } else { |
| f_ipa_tx(ts_RSL_CHAN_ACT_NACK(chan_nr, valueof(nack))); |
| } |
| } |
| |
| private function f_dyn_osmo_pdch_deact(integer bts_nr, integer trx_nr, integer ts_nr, |
| template (omit) RSL_Cause nack := omit) |
| runs on test_CT { |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(ts_nr)); |
| var RSL_Message rsl_unused; |
| /* ask BSC via VTY to activate a given OSMO style chan as PDCH */ |
| /* FIXME: no VTY command to activate Osmocom PDCH !! */ |
| /* expect the BSC to issue the related RSL command */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(chan_nr)); |
| if (istemplatekind(nack, "omit")) { |
| /* respond with a related acknowledgement */ |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(chan_nr)); |
| } else { |
| //f_ipa_tx(ts_RSL_RF_CHAN_REL_NACK(chan_nr, valueof(nack))); |
| } |
| } |
| |
| /* Test Osmocom dyn PDCH activation / deactivation triggered by VTY */ |
| testcase TC_dyn_pdch_osmo_act_deact() runs on test_CT { |
| var RSL_Message rsl_unused; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_TCH/H_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| |
| log("TCH/F_TCH/H_PDCH pchan starts out in disabled mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); |
| |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); |
| f_sleep(1.0); |
| log("TCH/F_TCH/H_PDCH requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test Osmocom dyn PDCH activation NACK behavior */ |
| testcase TC_dyn_pdch_osmo_act_nack() runs on test_CT { |
| var RSL_Message rsl_unused; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_TCH/H_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); |
| |
| /* NACK this activation and expect the "show timeslot" mode still to be NONE */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_NACK(chan_nr, RSL_ERR_EQUIPMENT_FAIL)); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test Osmocom dyn TS SDCCH8 activation / deactivation */ |
| testcase TC_dyn_ts_sdcch8_act_deact() runs on test_CT { |
| var RSL_Message rsl_unused, rsl_msg; |
| var DchanTuple dt; |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_TCH/H_SDCCH8_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr pdch_chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| |
| log("TCH/F_TCH/H_SDCCH8_PDCH pchan starts out in disabled mode:"); |
| f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, NONE_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); |
| |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); |
| f_sleep(1.0); |
| log("TCH/F_TCH/H_SDCCH8_PDC requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); |
| f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); |
| |
| /* Fill TS0 SDCCH channels (NOTE: only 3 SDCCH/4 channels are available |
| * on CCCH+SDCCH4+CBCH) */ |
| var DchanTuples sdcch_cleanup := {}; |
| var integer i; |
| for (i := 0; i < NUM_SDCCH_PER_BTS; i := i + 1) { |
| dt := f_est_dchan('23'O, i, '00010203040506'O); |
| sdcch_cleanup := sdcch_cleanup & { dt }; |
| } |
| |
| /* Now the dyn ts is selected. First PDCH is released, then sdcch chan is activated */ |
| f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(oct2int('23'O) + i, 1), 2342)); |
| rsl_unused := f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(pdch_chan_nr)); |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); |
| |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| dt.rsl_chan_nr := rsl_msg.ies[0].body.chan_nr; |
| dt.idx := {0, 0}; |
| |
| f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, SDCCH8_MODE); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, 2342)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, SDCCH8_MODE); |
| |
| f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), '1234'O)); |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3('1234'O))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| f_exp_chan_rel_and_clear(dt); |
| |
| /* The BSC will switch the TS back to PDCH once the only lchan using it is released: */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); |
| |
| /* Clean up SDCCH lchans */ |
| for (i := 0; i < lengthof(sdcch_cleanup); i := i + 1) { |
| f_perform_clear_test_ct(sdcch_cleanup[i]); |
| } |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Validate all 8 subslots of a dynamics TS configured as SDCCH8 are used */ |
| testcase TC_dyn_ts_sdcch8_all_subslots_used() runs on test_CT { |
| var ASP_RSL_Unitdata rsl_ud; |
| var integer i; |
| var integer chreq_total, chreq_nochan; |
| |
| f_init_vty(); |
| for (i := 1; i < 8; i := i + 1) { |
| if (i == 2) { |
| f_ts_set_chcomb(0, 0, i, "TCH/F_TCH/H_SDCCH8_PDCH"); |
| } else { |
| f_ts_set_chcomb(0, 0, i, "PDCH"); |
| } |
| } |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, guard_timeout := 60.0); |
| |
| /* The dyn TS want to activate PDCH mode, ACK that. */ |
| var RslChannelNr chan_nr; |
| chan_nr := valueof(t_RslChanNr_PDCH(2)); |
| f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); |
| |
| f_sleep(1.0); |
| |
| /* Exhaust all dedicated SDCCH lchans. |
| /* GSM 44.018 Table 9.1.8.2: |
| * RA = '13'O -> Establishment cause = 0001xxxx (MS dual rate capable and asks for "SDCCH"). |
| */ |
| var DchanTuples chan_cleanup := {}; |
| for (i := 0; i < NUM_SDCCH_PER_BTS; i := i+1) { |
| chan_cleanup := chan_cleanup & { f_est_dchan('13'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| } |
| |
| /* Only the dyn TS is still available. Its first lchan gets converted to SDCCH8 */ |
| chan_cleanup := chan_cleanup & { f_est_dchan_dyn('33'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| /* Also occupy the seven other SDCCH of the dyn TS */ |
| for (i := 0; i < 7; i := i+1) { |
| chan_cleanup := chan_cleanup & { f_est_dchan('33'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| } |
| |
| /* Clean up SDCCH lchans */ |
| for (i := 0; i < lengthof(chan_cleanup); i := i + 1) { |
| f_perform_clear_test_ct(chan_cleanup[i]); |
| } |
| |
| /* clean up config */ |
| f_ts_reset_chcomb(0); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test Osmocom dyn TS SDCCH8 activation / deactivation: If activating dyn TS as |
| SDCCH8 would end up in having no free TCH, then BSC should decide to activate |
| it as TCH directly instead. SYS#5309. */ |
| testcase TC_dyn_ts_sdcch8_tch_call_act_deact() runs on test_CT { |
| var RSL_Message rsl_unused, rsl_msg; |
| var DchanTuple dt; |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var integer i; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| for (i := 1; i < 8; i := i + 1) { |
| if (i == 6) { |
| f_ts_set_chcomb(0, 0, i, "TCH/F_TCH/H_SDCCH8_PDCH"); |
| } else { |
| f_ts_set_chcomb(0, 0, i, "PDCH"); |
| } |
| } |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr pdch_chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| |
| log("TCH/F_TCH/H_SDCCH8_PDCH pchan starts out in disabled mode:"); |
| f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, NONE_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); |
| |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); |
| f_sleep(1.0); |
| log("TCH/F_TCH/H_SDCCH8_PDC requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); |
| f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); |
| |
| /* Fill TS0 SDCCH channels (NOTE: only 3 SDCCH/4 channels are available |
| * on CCCH+SDCCH4+CBCH) */ |
| var DchanTuples chan_cleanup := {}; |
| var OCT1 ra := '43'O; /* RA containing reason=originating speech call*/ |
| for (i := 0; i < NUM_SDCCH_PER_BTS; i := i + 1) { |
| dt := f_est_dchan(ra, i, '00010203040506'O); |
| chan_cleanup := chan_cleanup & { dt }; |
| } |
| |
| /* Now the dyn ts is selected. First PDCH is released, then TCH chan is activated */ |
| f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(oct2int(ra) + i, 1), 2342)); |
| rsl_unused := f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(pdch_chan_nr)); |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); |
| |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| dt.rsl_chan_nr := rsl_msg.ies[0].body.chan_nr; |
| dt.idx := {0, 0}; |
| |
| f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, TCHH_MODE); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, 2342)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, TCHH_MODE); |
| |
| f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), '1234'O)); |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3('1234'O))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| f_exp_chan_rel_and_clear(dt); |
| |
| /* The BSC will switch the TS back to PDCH once the only lchan using it is released: */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); |
| |
| /* Clean up SDCCH lchans */ |
| for (i := 0; i < lengthof(chan_cleanup); i := i + 1) { |
| f_perform_clear_test_ct(chan_cleanup[i]); |
| } |
| |
| /* clean up config */ |
| f_ts_reset_chcomb(0); |
| /* TODO: clean up other channels? */ |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Test Osmocom dyn TS SDCCH8 activation / deactivation when SDCCH fails at BTS */ |
| testcase TC_dyn_ts_sdcch8_act_nack() runs on test_CT { |
| var RSL_Message rsl_unused, rsl_msg; |
| var DchanTuple dt; |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var GsmRrMessage rr; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_TCH/H_SDCCH8_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr pdch_chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| |
| log("TCH/F_TCH/H_SDCCH8_PDCH pchan starts out in disabled mode:"); |
| f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, NONE_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); |
| |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); |
| f_sleep(1.0); |
| log("TCH/F_TCH/H_SDCCH8_PDC requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); |
| f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); |
| |
| /* Fill TS0 SDCCH channels (NOTE: only 3 SDCCH/4 channels are available |
| * on CCCH+SDCCH4+CBCH) */ |
| var DchanTuples chan_cleanup := {}; |
| var integer i; |
| for (i := 0; i < NUM_SDCCH_PER_BTS; i := i + 1) { |
| dt := f_est_dchan('23'O, i, '00010203040506'O); |
| chan_cleanup := chan_cleanup & { dt }; |
| } |
| |
| /* Now the dyn ts is selected. First PDCH is released, then sdcch chan is activated */ |
| f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(oct2int('23'O) + i, 1), 2342)); |
| rsl_unused := f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(pdch_chan_nr)); |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); |
| |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| dt.rsl_chan_nr := rsl_msg.ies[0].body.chan_nr; |
| dt.idx := {0, 0}; |
| |
| f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, SDCCH8_MODE); |
| f_ipa_tx(ts_RSL_CHAN_ACT_NACK(dt.rsl_chan_nr, RSL_ERR_EQUIPMENT_FAIL)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| rr := dec_GsmRrMessage(rsl_msg.ies[1].body.full_imm_ass_info.payload); |
| if (rr.header.message_type != IMMEDIATE_ASSIGNMENT_REJECT) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, "Expected reject"); |
| } |
| |
| /* FIXME? Currently the TS stays in state BORKEN: */ |
| |
| /* The BSC will switch the TS back to PDCH once the only lchan using it is released: */ |
| /* rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); |
| * f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); |
| * f_sleep(1.0); |
| * f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE) |
| */ |
| |
| /* Clean up SDCCH lchans */ |
| for (i := 0; i < lengthof(chan_cleanup); i := i + 1) { |
| f_perform_clear_test_ct(chan_cleanup[i]); |
| } |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_chopped_ipa_ping() runs on test_CT { |
| const Integers bsc_ipa_ports := {mp_bsc_rsl_port, mp_bsc_oml_port, mp_bsc_ctrl_port}; |
| for (var integer i := 0; i < lengthof(bsc_ipa_ports); i := i + 1) { |
| IPA_Testing.f_run_TC_chopped_ipa_ping(mp_bsc_ip, bsc_ipa_ports[i], CONNECT_TO_SERVER); |
| } |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_chopped_ipa_payload() runs on test_CT { |
| const Integers bsc_ipa_ports := {mp_bsc_rsl_port, mp_bsc_oml_port |
| /* TODO: mp_bsc_ctrl_port does not work yet */}; |
| for (var integer i := 0; i < lengthof(bsc_ipa_ports); i := i + 1) { |
| IPA_Testing.f_run_TC_chopped_ipa_payload(mp_bsc_ip, bsc_ipa_ports[i], CONNECT_TO_SERVER); |
| } |
| f_shutdown_helper(); |
| } |
| |
| /* Verify the BSC sends the MS Power Parameters IE during CHAN ACT to make sure |
| the BTS does autonomous MS power control loop */ |
| testcase TC_assignment_verify_ms_power_params_ie() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| //pars.encr := valueof(t_EncrParams('01'O, f_rnd_octstring(8))); |
| pars.exp_ms_power_params := true; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* Verify activation and deactivation of the BCCH carrier power reduction mode */ |
| testcase TC_c0_power_red_mode() runs on test_CT { |
| f_init(1); |
| |
| for (var integer red := 6; red >= 0; red := red - 2) { |
| /* Configure BCCH carrier power reduction mode via the VTY */ |
| f_vty_transceive(BSCVTY, "bts 0 c0-power-reduction " & int2str(red)); |
| |
| /* Expect Osmocom specific BS Power Control message on the RSL */ |
| var template (present) RSL_Message tr_rsl_pdu := tr_RSL_BS_PWR_CTRL( |
| chan_nr := t_RslChanNr_BCCH(0), |
| bs_power := tr_RSL_IE_BS_Power(red / 2)); |
| tr_rsl_pdu.msg_disc := tr_RSL_MsgDisc(RSL_MDISC_CCHAN, false); |
| var RSL_Message unused := f_exp_ipa_rx(tr_rsl_pdu); |
| |
| /* Additionally verify the applied value over the CTRL interface */ |
| var CtrlValue cred := f_ctrl_get_bts(IPA_CTRL, 0, "c0-power-reduction"); |
| if (cred != int2str(red)) { |
| setverdict(fail, "Unexpected BCCH carrier power reduction value ", |
| cred, " (expected ", red, ")"); |
| } |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /*********************************************************************** |
| * MSC Pooling |
| ***********************************************************************/ |
| |
| template MobileIdentityLV ts_MI_TMSI_NRI_LV(integer nri_v, integer nri_bitlen := 10) := |
| ts_MI_TMSI_LV(tmsi := f_gen_tmsi(suffix := 0, nri_v := nri_v, nri_bitlen := nri_bitlen)); |
| |
| private function f_expect_lchan_rel(RSL_DCHAN_PT rsl_pt, RSLEM_PROC_PT rsl_proc_pt, template PDU_ML3_NW_MS exp_rr_rel_tmpl := tr_RRM_RR_RELEASE) |
| runs on MSC_ConnHdlr { |
| interleave { |
| [] rsl_pt.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch exp_rr_rel_tmpl)) { |
| f_logp(BSCVTY, "Got RSL RR Release"); |
| } |
| [] rsl_pt.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) { |
| f_logp(BSCVTY, "Got RSL Deact SACCH"); |
| } |
| [] rsl_pt.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)) { |
| f_logp(BSCVTY, "Got RSL RF Chan Rel, sending Rel Ack"); |
| rsl_pt.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| f_rslem_unregister(0, g_chan_nr, PT := rsl_proc_pt); |
| break; |
| } |
| } |
| } |
| |
| private altstep as_mgcp_ack_all_dlcx() runs on MSC_ConnHdlr { |
| var MgcpCommand mgcp_cmd; |
| [] MGCP.receive(tr_DLCX(?)) -> value mgcp_cmd { |
| MGCP.send(ts_DLCX_ACK2(mgcp_cmd.line.trans_id)); |
| repeat; |
| } |
| } |
| |
| private altstep as_rsl_ack_all_rel_req() runs on MSC_ConnHdlr { |
| var RslLinkId main_dcch := valueof(ts_RslLinkID_DCCH(0)); |
| [] RSL.receive(tr_RSL_REL_REQ(g_chan_nr, ?)) { |
| RSL.send(ts_RSL_REL_CONF(g_chan_nr, main_dcch)); |
| repeat; |
| } |
| } |
| |
| friend function f_perform_clear(RSL_DCHAN_PT rsl_pt := RSL, RSLEM_PROC_PT rsl_proc_pt := RSL_PROC, |
| template PDU_ML3_NW_MS exp_rr_rel_tmpl := tr_RRM_RR_RELEASE) |
| runs on MSC_ConnHdlr { |
| var default ack_dlcx := activate(as_mgcp_ack_all_dlcx()); |
| var default ack_rel_req := activate(as_rsl_ack_all_rel_req()); |
| f_logp(BSCVTY, "MSC instructs BSC to clear channel"); |
| BSSAP.send(ts_BSSMAP_ClearCommand(0)); |
| interleave { |
| [] rsl_pt.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch exp_rr_rel_tmpl)) { |
| f_logp(BSCVTY, "Got RSL RR Release"); |
| } |
| [] rsl_pt.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) { |
| f_logp(BSCVTY, "Got RSL Deact SACCH"); |
| } |
| [] BSSAP.receive(tr_BSSMAP_ClearComplete) { |
| f_logp(BSCVTY, "Got BSSMAP Clear Complete"); |
| /* Also drop the SCCP connection */ |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| } |
| [] rsl_pt.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)) { |
| f_logp(BSCVTY, "Got RSL RF Chan Rel, sending Rel Ack"); |
| rsl_pt.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| f_rslem_unregister(0, g_chan_nr, PT := rsl_proc_pt); |
| } |
| } |
| deactivate(ack_dlcx); |
| deactivate(ack_rel_req); |
| } |
| |
| friend function f_perform_clear_no_rr_rel(RSL_DCHAN_PT rsl_pt := RSL, RSLEM_PROC_PT rsl_proc_pt := RSL_PROC) |
| runs on MSC_ConnHdlr { |
| var default ack_dlcx := activate(as_mgcp_ack_all_dlcx()); |
| var default ack_rel_req := activate(as_rsl_ack_all_rel_req()); |
| f_logp(BSCVTY, "MSC instructs BSC to clear channel"); |
| BSSAP.send(ts_BSSMAP_ClearCommand(0)); |
| interleave { |
| [] rsl_pt.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) { |
| f_logp(BSCVTY, "Got RSL Deact SACCH"); |
| } |
| [] BSSAP.receive(tr_BSSMAP_ClearComplete) { |
| f_logp(BSCVTY, "Got BSSMAP Clear Complete"); |
| /* Also drop the SCCP connection */ |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| } |
| [] rsl_pt.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)) { |
| f_logp(BSCVTY, "Got RSL RF Chan Rel, sending Rel Ack"); |
| rsl_pt.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| f_rslem_unregister(0, g_chan_nr, PT := rsl_proc_pt); |
| } |
| } |
| deactivate(ack_dlcx); |
| deactivate(ack_rel_req); |
| } |
| |
| friend function f_perform_clear_no_lchan() |
| runs on MSC_ConnHdlr { |
| f_logp(BSCVTY, "MSC instructs BSC to clear channel"); |
| BSSAP.send(ts_BSSMAP_ClearCommand(0)); |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| f_logp(BSCVTY, "Got BSSMAP Clear Complete"); |
| /* Also drop the SCCP connection */ |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| } |
| |
| friend function f_perform_clear_test_ct(DchanTuple dt) |
| runs on test_CT |
| { |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| f_exp_chan_rel_and_clear(dt); |
| } |
| |
| private function f_perform_compl_l3(RSL_DCHAN_PT rsl_pt, RSLEM_PROC_PT rsl_proc_pt, |
| template PDU_ML3_MS_NW l3_info, boolean do_clear := true, boolean expect_bssmap_l3 := true) |
| runs on MSC_ConnHdlr { |
| timer T := 10.0; |
| var octetstring l3_enc := enc_PDU_ML3_MS_NW(valueof(l3_info)); |
| |
| f_logp(BSCVTY, "establish channel, send Complete Layer 3 Info"); |
| f_create_bssmap_exp(l3_enc); |
| |
| /* RSL_Emulation.f_chan_est() on rsl_pt: |
| * This is basically code dup with s/RSL/rsl_pt from: |
| * RSL_Emulation.f_chan_est(g_pars.ra, l3_enc, g_pars.link_id, g_pars.fn); |
| */ |
| var RSL_Message rx_rsl; |
| var GsmRrMessage rr; |
| |
| /* request a channel to be established */ |
| rsl_pt.send(ts_RSLDC_ChanRqd(g_pars.ra, g_pars.fn)); |
| /* expect immediate assignment. |
| * Code dup with s/RSL/rsl_pt from: |
| * rx_rsl := f_rx_or_fail(tr_RSL_IMM_ASSIGN); |
| */ |
| timer Tt := 10.0; |
| |
| /* request a channel to be established */ |
| Tt.start; |
| alt { |
| [] rsl_pt.receive(tr_RSL_IMM_ASSIGN) -> value rx_rsl { |
| Tt.stop; |
| } |
| [] rsl_pt.receive { |
| setverdict(fail, "Unexpected RSL message on DCHAN"); |
| mtc.stop; |
| } |
| [] Tt.timeout { |
| setverdict(fail, "Timeout waiting for RSL on DCHAN"); |
| mtc.stop; |
| } |
| } |
| rr := dec_GsmRrMessage(rx_rsl.ies[1].body.full_imm_ass_info.payload); |
| g_chan_nr := rr.payload.imm_ass.chan_desc.chan_nr; |
| rsl_pt.send(ts_RSL_EST_IND(g_chan_nr, valueof(g_pars.link_id), l3_enc)); |
| |
| |
| if (expect_bssmap_l3) { |
| f_logp(BSCVTY, "expect BSSAP Complete Layer 3 Info at MSC"); |
| var template PDU_BSSAP exp_l3_compl; |
| exp_l3_compl := tr_BSSMAP_ComplL3() |
| if (g_pars.aoip == false) { |
| exp_l3_compl.pdu.bssmap.completeLayer3Information.codecList := omit; |
| } else { |
| exp_l3_compl.pdu.bssmap.completeLayer3Information.codecList := ?; |
| } |
| |
| var PDU_BSSAP bssap; |
| T.start; |
| alt { |
| [] BSSAP.receive(exp_l3_compl) -> value bssap { |
| f_logp(BSCVTY, "received expected Complete Layer 3 Info at MSC"); |
| log("rx exp_l3_compl = ", bssap); |
| } |
| [] BSSAP.receive(tr_BSSMAP_ComplL3) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, "Received non-matching COMPLETE LAYER 3 INFORMATION"); |
| } |
| [] T.timeout { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, "Timeout waiting for COMPLETE LAYER 3 INFORMATION"); |
| } |
| } |
| |
| /* start ciphering, if requested */ |
| if (ispresent(g_pars.encr)) { |
| f_logp(BSCVTY, "start ciphering"); |
| f_cipher_mode(g_pars.encr, rsl_pt := rsl_pt, rsl_proc_pt := rsl_proc_pt); |
| } |
| } |
| |
| if (do_clear) { |
| f_perform_clear(rsl_pt, rsl_proc_pt); |
| } |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| |
| private function f_tc_mscpool_compl_l3(charstring id) runs on MSC_ConnHdlr { |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| if (g_pars.mscpool.rsl_idx == 0) { |
| f_perform_compl_l3(RSL, RSL_PROC, g_pars.mscpool.l3_info); |
| } else if (g_pars.mscpool.rsl_idx == 1) { |
| f_perform_compl_l3(RSL1, RSL1_PROC, g_pars.mscpool.l3_info); |
| } else if (g_pars.mscpool.rsl_idx == 2) { |
| f_perform_compl_l3(RSL2, RSL2_PROC, g_pars.mscpool.l3_info); |
| } |
| } |
| |
| /* Various Complete Layer 3 by IMSI all end up with the first MSC, because the other MSCs are not connected. */ |
| private function f_tc_mscpool_L3Compl_on_1_msc(charstring id) runs on MSC_ConnHdlr { |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| f_perform_compl_l3(RSL, RSL_PROC, ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000000001'H)), '00F110'O) ); |
| f_perform_compl_l3(RSL, RSL_PROC, ts_CM_SERV_REQ(CM_TYPE_MO_SMS, valueof(ts_MI_IMSI_LV('001010000000002'H))) ); |
| f_perform_compl_l3(RSL, RSL_PROC, ts_PAG_RESP(valueof(ts_MI_IMSI_LV('001010000000003'H))) ); |
| f_perform_compl_l3(RSL, RSL_PROC, ts_ML3_MO_MM_IMSI_DET_Ind(valueof(ts_MI_IMSI_LV('001010000000004'H))) ); |
| } |
| testcase TC_mscpool_L3Compl_on_1_msc() runs on test_CT { |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_ctrs_msc_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_mscpool_L3Compl_on_1_msc), pars); |
| vc_conn.done; |
| |
| f_ctrs_msc_expect(0, "mscpool:subscr:new", 4); |
| f_shutdown_helper(); |
| } |
| |
| /* Three Layer 3 Complete by IMSI are round-robin'ed across two connected MSCs */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_imsi_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000000001'H)), '00F110'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV('001010000000002'H)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:new"); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_IMSI_LV('001010000000003'H)))); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| f_shutdown_helper(); |
| } |
| |
| /* Three LU by TMSI are round-robin'ed across two connected MSCs, because they contain the NULL-NRI 0 |
| * (configured in osmo-bsc.cfg). */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_LU_by_tmsi_null_nri_0_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(0)), '00F110'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:reattach"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(0)), '00F110'O)); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:reattach"); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(0)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:reattach"); |
| f_shutdown_helper(); |
| } |
| |
| /* Three LU by TMSI are round-robin'ed across two connected MSCs, because they contain the NULL-NRI 1 |
| * (configured in osmo-bsc.cfg). In this case, one of the MSC also has the NULL-NRI as part of its owned NRIs, but the |
| * NULL-NRI setting is stronger than that. */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_LU_by_tmsi_null_nri_1_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(1)), '00F110'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:reattach"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(1)), '00F110'O)); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:reattach"); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(1)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:reattach"); |
| f_shutdown_helper(); |
| } |
| |
| /* Three Layer 3 Complete by TMSI are round-robin'ed across two connected MSCs, because they contain an NRI not |
| * assigned to any MSC (configured in osmo-bsc.cfg). */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_tmsi_unassigned_nri_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI that is not assigned to any MSC */ |
| pars1.mscpool.l3_info := valueof(ts_ML3_MO_MM_IMSI_DET_Ind(valueof(ts_MI_TMSI_NRI_LV(1023)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| /* An NRI that is not assigned to any MSC */ |
| pars2.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(768)), '00F110'O)); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:new"); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| /* An NRI that is not assigned to any MSC */ |
| pars3.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_SS_ACT, valueof(ts_MI_TMSI_NRI_LV(819)))); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| f_shutdown_helper(); |
| } |
| |
| /* Three Layer 3 Complete by TMSI are round-robin'ed across two connected MSCs, because they contain an NRI |
| * assigned to an MSC that is currently not connected (configured in osmo-bsc.cfg). */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_tmsi_valid_nri_msc_not_connected_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI that is assigned to an unconnected MSC */ |
| pars1.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_TMSI_NRI_LV(512)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_add(2, "mscpool:subscr:attach_lost"); |
| f_ctrs_msc_add(0, "mscpool:subscr:new"); |
| f_ctrs_msc_verify(); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| /* An NRI that is assigned to an unconnected MSC */ |
| pars2.mscpool.l3_info := valueof(ts_ML3_MO_MM_IMSI_DET_Ind(valueof(ts_MI_TMSI_NRI_LV(767)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_add(2, "mscpool:subscr:attach_lost"); |
| f_ctrs_msc_add(1, "mscpool:subscr:new"); |
| f_ctrs_msc_verify(); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| /* An NRI that is assigned to an unconnected MSC */ |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(750)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_add(2, "mscpool:subscr:attach_lost"); |
| f_ctrs_msc_add(0, "mscpool:subscr:new"); |
| f_ctrs_msc_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* Three Layer 3 Complete by TMSI with valid NRI for the second MSC are all directed to the second MSC (configured in |
| * osmo-bsc.cfg). */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_tmsi_valid_nri_1() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* All TMSIs in this test point at the second MSC, set the round robin to point at the first MSC to make sure |
| * this is not using round-robin. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI of the second MSC's range (256-511) */ |
| pars1.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_SMS, valueof(ts_MI_TMSI_NRI_LV(256)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:known"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| /* An NRI of the second MSC's range (256-511) */ |
| pars2.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_TMSI_NRI_LV(260)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:known"); |
| |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars3.mscpool.rsl_idx := 2; |
| /* An NRI of the second MSC's range (256-511) */ |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(511)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:known"); |
| f_shutdown_helper(); |
| } |
| |
| /* Layer 3 Complete by TMSI with valid NRI for the third MSC are directed to the third MSC (configured in osmo-bsc.cfg), |
| * while a round-robin remains unaffected by that. */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_tmsi_valid_nri_2() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* All TMSIs in this test point at the third MSC, set the round robin to point at the second MSC to make sure |
| * this is not using round-robin. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 1"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI of the third MSC's range (512-767) */ |
| pars1.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_SMS, valueof(ts_MI_TMSI_NRI_LV(512)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:known"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars2.mscpool.rsl_idx := 1; |
| /* An NRI of the third MSC's range (512-767) */ |
| pars2.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_TMSI_NRI_LV(678)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:known"); |
| |
| /* The above forwardings to third MSC have not affected the round robin, which still points at the second MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000000013'H)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:new"); |
| f_shutdown_helper(); |
| } |
| |
| /* LU with a TMSI but indicating a different PLMN in its previous LAI: ignore the NRI. */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_LU_by_tmsi_from_other_PLMN() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* The TMSIs in this test points at the second MSC, but since it is from a different PLMN, round-robin is used |
| * instead, and hits msc 0. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| /* An NRI of the second MSC's range (256-511), but a PLMN that doesn't match with osmo-bsc.cfg */ |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(260)), '99F999'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| /* An NRI of the third MSC's range (512-767) and a matching PLMN gets directed by NRI. */ |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(555)), '00F110'O)); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:known"); |
| f_shutdown_helper(); |
| } |
| |
| /* Make sure that whichever MSC paged a subscriber will also get the Paging Response. Page by IMSI, which would be |
| * round-robined to another MSC, to make sure the Paging->Response relation is stronger than the NRI->MSC mapping. */ |
| private function f_tc_mscpool_paging_imsi(charstring id) runs on MSC_ConnHdlr { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list := { cIl_CI := { ts_BSSMAP_CI_CI(0) } }; |
| //cid_list := { cIl_allInBSS := ''O }; |
| var RSL_ChanNeeded rsl_chneed := RSL_CHANNEED_SDCCH; |
| var template BSSMAP_IE_ChannelNeeded bssmap_chneed := ts_BSSMAP_IE_ChanNeeded(int2bit(enum2int(valueof(rsl_chneed)),2)); |
| var BSSAP_N_UNITDATA_req paging; |
| var hexstring imsi := '001010000000123'H; |
| |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| |
| paging := valueof(ts_BSSAP_UNITDATA_req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| valueof(ts_BSSMAP_Paging(imsi, cid_list, omit, bssmap_chneed)))); |
| BSSAP.send(paging); |
| |
| /* Register any RSL conn so that the Paging Command gets received here. With the current RSL_Emulation's main() |
| * handling of '[bts_role] IPA_PT.receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD()))' it doesn't matter at all which |
| * channel number is picked here. */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(0, RSL_CHAN_NR_INVALID)); |
| f_rslem_register(0, new_chan_nr); |
| RSL.receive(tr_RSL_PAGING_CMD(tr_MI_IMSI(imsi))); |
| f_rslem_unregister(0, new_chan_nr); |
| |
| /* Despite the round robin pointing at the second MSC ('roundrobin next 1'), the earlier Paging for the same IMSI |
| * causes this Paging Response to go to the first MSC (bssap_idx := 0). */ |
| f_perform_compl_l3(RSL, RSL_PROC, ts_PAG_RESP(valueof(ts_MI_IMSI_LV(imsi))) ); |
| f_sleep(1.0); |
| } |
| testcase TC_mscpool_paging_and_response_imsi() runs on test_CT { |
| f_init(nr_bts := 1, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* Testing a Paging on the first MSC to get a Paging Response back to the first MSC. Set round robin to the |
| * second MSC to make sure we're getting the Paging logic, not a coincidental round robin match. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 1"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.sccp_addr_bsc := g_bssap[pars1.mscpool.bssap_idx].sccp_addr_peer; |
| pars1.sccp_addr_msc := g_bssap[pars1.mscpool.bssap_idx].sccp_addr_own; |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_paging_imsi), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:paged"); |
| f_shutdown_helper(); |
| } |
| |
| /* Make sure that whichever MSC paged a subscriber will also get the Paging Response. Page by TMSI with an NRI value |
| * that matches a different MSC, to make sure the Paging->Response relation is stronger than the NRI->MSC mapping. */ |
| private function f_tc_mscpool_paging_tmsi(charstring id) runs on MSC_ConnHdlr { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list := { cIl_CI := { ts_BSSMAP_CI_CI(0) } }; |
| //cid_list := { cIl_allInBSS := ''O }; |
| var RSL_ChanNeeded rsl_chneed := RSL_CHANNEED_SDCCH; |
| var template BSSMAP_IE_ChannelNeeded bssmap_chneed := ts_BSSMAP_IE_ChanNeeded(int2bit(enum2int(valueof(rsl_chneed)),2)); |
| var integer nri_v := 300; /* <-- second MSC's NRI */ |
| var octetstring tmsi := f_gen_tmsi(suffix := 0, nri_v := nri_v); |
| var BSSAP_N_UNITDATA_req paging; |
| |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| |
| paging := valueof(ts_BSSAP_UNITDATA_req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| valueof(ts_BSSMAP_Paging('001010000000011'H, cid_list, tmsi, bssmap_chneed)))); |
| BSSAP.send(paging); |
| |
| /* Register any RSL conn so that the Paging Command gets received here. With the current RSL_Emulation's main() |
| * handling of '[bts_role] IPA_PT.receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD()))' it doesn't matter at all which |
| * channel number is picked here. */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(0, RSL_CHAN_NR_INVALID)); |
| f_rslem_register(0, new_chan_nr); |
| RSL.receive(tr_RSL_PAGING_CMD(t_MI_TMSI(tmsi))); |
| f_rslem_unregister(0, new_chan_nr); |
| |
| /* Despite the NRI matching the second MSC (NRI from 'msc 1' in osmo-bsc.cfg) and round robin pointing at the |
| * third MSC ('roundrobin next 2'), the earlier Paging for the same TMSI causes this Paging Response to go to |
| * the first MSC (bssap_idx := 0). */ |
| f_perform_compl_l3(RSL, RSL_PROC, ts_PAG_RESP(valueof(ts_MI_TMSI_NRI_LV(nri_v))) ); |
| f_sleep(1.0); |
| } |
| testcase TC_mscpool_paging_and_response_tmsi() runs on test_CT { |
| f_init(nr_bts := 1, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* Testing a Paging on the first MSC to get a Paging Response back to the first MSC. Set round robin to the |
| * third MSC to make sure we're getting the Paging logic, not a coincidental round robin match. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 2"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.sccp_addr_bsc := g_bssap[pars1.mscpool.bssap_idx].sccp_addr_peer; |
| pars1.sccp_addr_msc := g_bssap[pars1.mscpool.bssap_idx].sccp_addr_own; |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_paging_tmsi), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:paged"); |
| f_shutdown_helper(); |
| } |
| |
| /* For round-robin, skip an MSC that has 'no allow-attach' set. */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_no_allow_attach_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| /* Mark the second MSC as offloading, round-robin should skip this MSC now. */ |
| f_vty_msc_allow_attach(BSCVTY, {true, false, true}); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000000001'H)), '00F110'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV('001010000000002'H)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_IMSI_LV('001010000000003'H)))); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| f_shutdown_helper(); |
| } |
| |
| /* An MSC that has 'no allow-attach' set should still serve subscribers that are already attached according to their |
| * TMSI NRI. */ |
| testcase TC_mscpool_no_allow_attach_valid_nri() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* Mark the second MSC as offloading, round-robin should skip this MSC now. */ |
| f_vty_msc_allow_attach(BSCVTY, {true, false, true}); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| /* Round robin points at msc 0, but the valid NRI directs to msc 1, even though msc 1 has 'no allow-attach'. */ |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI of the second MSC's range (256-511) */ |
| pars1.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_TMSI_NRI_LV(260)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:known"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV('001010000000002'H)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV('001010000000003'H)))); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:new"); |
| f_shutdown_helper(); |
| } |
| |
| /* Allow/Deny emergency calls globally via VTY */ |
| private function f_vty_allow_emerg_msc(boolean allow) runs on test_CT { |
| f_vty_enter_cfg_msc(BSCVTY, 0); |
| if (allow) { |
| f_vty_transceive(BSCVTY, "allow-emergency allow"); |
| } else { |
| f_vty_transceive(BSCVTY, "allow-emergency deny"); |
| } |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| /* Allow/Deny emergency calls per BTS via VTY */ |
| private function f_vty_allow_emerg_bts(boolean allow, integer bts_nr) runs on test_CT { |
| f_vty_enter_cfg_bts(BSCVTY, bts_nr); |
| if (allow) { |
| f_vty_transceive(BSCVTY, "rach emergency call allowed 1"); |
| } else { |
| f_vty_transceive(BSCVTY, "rach emergency call allowed 0"); |
| } |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| /* Allow/Forbid Fast Return after SRVCC on a given BTS via VTY */ |
| private function f_vty_allow_srvcc_fast_return(boolean allow, integer bts_nr) runs on test_CT { |
| f_vty_enter_cfg_bts(BSCVTY, bts_nr); |
| if (allow) { |
| f_vty_transceive(BSCVTY, "srvcc fast-return allow"); |
| } else { |
| f_vty_transceive(BSCVTY, "srvcc fast-return forbid"); |
| } |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| /* Allow/Forbid TCH for signalling if SDCCH exhausted on a given BTS via VTY */ |
| private function f_vty_allow_tch_for_signalling(boolean allow, integer bts_nr) runs on test_CT { |
| f_vty_enter_cfg_bts(BSCVTY, bts_nr); |
| if (allow) { |
| f_vty_transceive(BSCVTY, "channel allocator allow-tch-for-signalling 1"); |
| } else { |
| f_vty_transceive(BSCVTY, "channel allocator allow-tch-for-signalling 0"); |
| } |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| /* Begin assignmet procedure and send an EMERGENCY SETUP (RR) */ |
| private function f_assignment_emerg_setup() runs on MSC_ConnHdlr { |
| var PDU_ML3_MS_NW emerg_setup; |
| var octetstring emerg_setup_enc; |
| var RSL_Message emerg_setup_data_ind; |
| |
| f_establish_fully(omit, omit); |
| |
| emerg_setup := valueof(ts_ML3_MO_CC_EMERG_SETUP(1, valueof(ts_Bcap_voice))); |
| emerg_setup_enc := enc_PDU_ML3_MS_NW(emerg_setup); |
| emerg_setup_data_ind := valueof(ts_RSL_DATA_IND(g_chan_nr, valueof(ts_RslLinkID_DCCH(0)), emerg_setup_enc)); |
| |
| RSL.send(emerg_setup_data_ind); |
| } |
| |
| /* Test if the EMERGENCY SETUP gets passed on to the MSC via A when EMERGENCY |
| * CALLS are permitted by the BSC config. */ |
| private function f_TC_assignment_emerg_setup_allow(charstring id) runs on MSC_ConnHdlr { |
| var PDU_BSSAP emerg_setup_data_ind_bssap; |
| var PDU_ML3_MS_NW emerg_setup; |
| timer T := 3.0; |
| |
| f_assignment_emerg_setup() |
| |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DTAP) -> value emerg_setup_data_ind_bssap { |
| emerg_setup := dec_PDU_ML3_MS_NW(emerg_setup_data_ind_bssap.pdu.dtap); |
| if (not isbound(emerg_setup.msgs.cc.emergencySetup)) { |
| setverdict(fail, "no emergency setup"); |
| } |
| } |
| [] BSSAP.receive { |
| setverdict(fail, "unexpected BSSAP message!"); |
| } |
| [] T.timeout { |
| setverdict(fail, "timout waiting for EMERGENCY SETUP!"); |
| } |
| } |
| |
| setverdict(pass); |
| f_perform_clear(); |
| } |
| |
| /* Test if the EMERGENCY SETUP gets blocked by the BSC if EMERGENCY CALLS are |
| * forbidden by the BSC config. */ |
| private function f_TC_assignment_emerg_setup_deny(charstring id) runs on MSC_ConnHdlr { |
| var PDU_BSSAP emerg_setup_data_ind_bssap; |
| timer T := 3.0; |
| |
| f_assignment_emerg_setup() |
| |
| T.start; |
| alt { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE)) { |
| setverdict(pass); |
| } |
| [] RSL.receive { |
| setverdict(fail, "unexpected RSL message!"); |
| } |
| [] T.timeout { |
| setverdict(fail, "timout waiting for RR CHANNEL RELEASE!"); |
| } |
| } |
| BSSAP.receive(tr_BSSMAP_ClearRequest); |
| f_perform_clear_no_rr_rel(); |
| } |
| |
| /* EMERGENCY CALL situation #1, allowed globally and by BTS */ |
| testcase TC_assignment_emerg_setup_allow() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(true, 0); |
| vc_conn := f_start_handler(refers(f_TC_assignment_emerg_setup_allow), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* EMERGENCY CALL situation #2, forbidden globally but allowed by BTS */ |
| testcase TC_assignment_emerg_setup_deny_msc() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_vty_allow_emerg_msc(false); |
| f_vty_allow_emerg_bts(true, 0); |
| vc_conn := f_start_handler(refers(f_TC_assignment_emerg_setup_deny), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* EMERGENCY CALL situation #3, allowed globally but forbidden by BTS */ |
| testcase TC_assignment_emerg_setup_deny_bts() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| /* Note: This simulates a spec violation by the MS, correct MS |
| * implementations would not try to establish an emergency call because |
| * the system information tells in advance that emergency calls are |
| * not forbidden */ |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(false, 0); |
| vc_conn := f_start_handler(refers(f_TC_assignment_emerg_setup_deny), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* Test what happens when an emergency call arrives while all TCH channels are |
| * busy, the BSC is expected to terminate one call in favor of the incoming |
| * emergency call */ |
| testcase TC_emerg_premption() runs on test_CT { |
| var ASP_RSL_Unitdata rsl_ud; |
| var integer i; |
| var integer chreq_total, chreq_nochan; |
| var RSL_Message rx_rsl; |
| |
| f_init(1); |
| f_sleep(1.0); |
| |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(true, 0); |
| |
| /* Fill up all channels on the BTS */ |
| chreq_total := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total"); |
| chreq_nochan := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:no_channel"); |
| for (i := 0; i < NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS; i := i+1) { |
| f_chreq_act_ack('33'O, i); |
| } |
| IPA_RSL[0][0].clear; |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", |
| chreq_total + NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS); |
| |
| /* Send EST IND for the first TCH, so we get to test the RR release cause */ |
| var RslChannelNr first_tch := valueof(t_RslChanNr_Bm(1)); |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(first_tch, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| /* Accept BSSAP conn, so we get to test the Clear Request cause */ |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| var integer sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(rx_c_ind.connectionId)); |
| |
| /* Send Channel request for emegergency call */ |
| f_ipa_tx(ts_RSL_CHAN_RQD('A5'O, 23)); |
| |
| /* Expect the BSC to release one (the first) TCH/F on the BTS */ |
| f_expect_chan_rel(first_tch, expect_rr_chan_rel := true, expect_rll_rel_req := false, |
| expect_rr_cause := GSM48_RR_CAUSE_PREMPTIVE_REL); |
| |
| /* Also expect a BSSMAP Clear Request with PREEMPTION */ |
| var BSSAP_N_DATA_ind rx_clear_req; |
| const myBSSMAP_Cause preemption := GSM0808_CAUSE_PREEMPTION; |
| BSSAP.receive(tr_BSSAP_DATA_ind(sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_clear_req; |
| log("XXX ", rx_clear_req); |
| if (rx_clear_req.userData.pdu.bssmap.clearRequest.cause.causeValue != int2bit(enum2int(preemption), 7)) { |
| setverdict(fail, "BSSMAP Clear Request: expected cause PREEMPTION"); |
| } |
| |
| /* Expect the BSC to send activate/assign the channel for the emergency call */ |
| rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| if (first_tch != rx_rsl.ies[0].body.chan_nr) { |
| setverdict(fail, "different TCH lchan activated than expected"); |
| } |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(first_tch, 33)); |
| rx_rsl := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| |
| /* complete the BSSMAP Clear to satisfy the conn leak check */ |
| BSSAP.send(ts_BSSAP_DATA_req(sccp_conn_id, ts_BSSMAP_ClearCommand(enum2int(preemption)))); |
| BSSAP.receive(tr_BSSAP_DATA_ind(sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| BSSAP.send(ts_BSSAP_DISC_req(sccp_conn_id, 0)); |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Hopping parameters per a timeslot */ |
| private type record length(0..64) of GsmArfcn ArfcnList; |
| private type record FHParamsTs { |
| boolean enabled, |
| uint6_t hsn, |
| uint6_t maio, |
| ArfcnList ma |
| }; |
| |
| /* Hopping parameters per a transceiver */ |
| private type record FHParamsTrx { |
| GsmBandArfcn arfcn, |
| FHParamsTs ts[8] |
| }; |
| |
| /* Randomly generate the hopping parameters for the given timeslot numbers */ |
| private function f_TC_fh_params_gen(template integer tr_tn := (1, 3, 5)) |
| runs on test_CT return FHParamsTrx { |
| var FHParamsTrx fhp; |
| |
| /* Generate a random ARFCN in the range of 0 - 3. This ARFCN will |
| * fall in the GSM900 band. */ |
| fhp.arfcn.arfcn := f_rnd_int(3); |
| fhp.arfcn.pcs := false; |
| |
| for (var integer tn := 0; tn < 8; tn := tn + 1) { |
| if (not match(tn, tr_tn)) { |
| fhp.ts[tn].enabled := false; |
| fhp.ts[tn].ma := { }; |
| continue; |
| } |
| |
| /* Random HSN / MAIO values: 0..63 */ |
| fhp.ts[tn].hsn := f_rnd_int(64); |
| fhp.ts[tn].maio := f_rnd_int(64); |
| fhp.ts[tn].ma := { }; |
| |
| /* Random Mobile Allocation (hopping channels) */ |
| var integer ma_len := 2 + f_rnd_int(9); /* 2..10 channels */ |
| var integer step := 3 + f_rnd_int(4); /* 3..6 stepping */ |
| for (var integer i := 1; i <= ma_len; i := i + 1) { |
| fhp.ts[tn].ma := fhp.ts[tn].ma & { i * step }; |
| } |
| |
| fhp.ts[tn].enabled := true; |
| } |
| |
| log("f_TC_fh_params_gen(): ", fhp); |
| return fhp; |
| } |
| |
| /* Make sure that the given Channel Description IE matches the hopping configuration */ |
| private function f_TC_fh_params_match_chan_desc(in FHParamsTrx fhp, in ChannelDescription cd) |
| { |
| var template (present) ChannelDescription tr_cd; |
| var template (present) MaioHsn tr_maio_hsn; |
| var uint3_t tn := cd.chan_nr.tn; |
| |
| if (fhp.ts[tn].enabled) { |
| tr_maio_hsn := tr_HsnMaio(fhp.ts[tn].hsn, fhp.ts[tn].maio); |
| tr_cd := tr_ChanDescH1(cd.chan_nr, tr_maio_hsn); |
| } else { |
| tr_cd := tr_ChanDescH0(cd.chan_nr, fhp.arfcn.arfcn); |
| } |
| |
| if (not match(cd, tr_cd)) { |
| setverdict(fail, "Channel Description IE does not match: ", |
| cd, " vs expected ", tr_cd); |
| } |
| } |
| |
| /* Make sure that the given Mobile Allocation IE matches the hopping configuration */ |
| private function f_TC_fh_params_match_ma(in FHParamsTrx fhp, uint3_t tn, |
| in MobileAllocationLV ma) |
| { |
| var template MobileAllocationLV tr_ma := f_TC_fh_params_gen_tr_ma(fhp, tn, ma); |
| |
| if (not match(ma, tr_ma)) { |
| setverdict(fail, "Mobile Allocation IE does not match (tn := ", |
| tn, "): ", ma, " vs expected: ", tr_ma); |
| } else { |
| setverdict(pass); |
| } |
| } |
| |
| private function f_TC_fh_params_gen_tr_ma(in FHParamsTrx fhp, uint3_t tn, |
| in MobileAllocationLV ma) |
| return template MobileAllocationLV { |
| /* Mobile Allocation IE is expected to be empty if hopping is not enabled */ |
| if (not fhp.ts[tn].enabled) { |
| return { len := 0, ma := ''B }; |
| } |
| |
| var bitstring full_mask := f_pad_bit(''B, 1024, '0'B); |
| var bitstring slot_mask := f_pad_bit(''B, 1024, '0'B); |
| var bitstring ma_mask := ''B; |
| |
| /* Compose the full bit-mask (all channels, up to 1024 entries) */ |
| for (var integer i := 0; i < lengthof(fhp.ts); i := i + 1) { |
| for (var integer j := 0; j < lengthof(fhp.ts[i].ma); j := j + 1) { |
| if (full_mask[fhp.ts[i].ma[j]] == '1'B) |
| { continue; } |
| full_mask[fhp.ts[i].ma[j]] := '1'B; |
| } |
| } |
| |
| /* Take ARFCN of the TRX itself into account */ |
| full_mask[fhp.arfcn.arfcn] := '1'B; |
| |
| /* Compose a bit-mask for the given timeslot number */ |
| for (var integer i := 0; i < lengthof(fhp.ts[tn].ma); i := i + 1) { |
| slot_mask[fhp.ts[tn].ma[i]] := '1'B; |
| } |
| |
| /* Finally, compose the Mobile Allocation bit-mask */ |
| for (var integer i := 1; i < lengthof(full_mask); i := i + 1) { |
| if (full_mask[i] != '1'B) |
| { continue; } |
| |
| /* FIXME: ma_mask := ma_mask & slot_mask[i]; // triggers a bug in TITAN */ |
| if (slot_mask[i] == '1'B) { |
| ma_mask := ma_mask & '1'B; |
| } else { |
| ma_mask := ma_mask & '0'B; |
| } |
| } |
| |
| /* ARFCN 0 (if present) goes to the last position of the bit-mask */ |
| if (full_mask[0] == '1'B) { |
| /* FIXME: ma_mask := ma_mask & slot_mask[0]; // triggers a bug in TITAN */ |
| if (slot_mask[0] == '1'B) { |
| ma_mask := ma_mask & '1'B; |
| } else { |
| ma_mask := ma_mask & '0'B; |
| } |
| } |
| |
| /* Ensure that ma_mask is octet-aligned */ |
| var integer ma_mask_len := (lengthof(ma_mask) + 8 - 1) / 8; |
| ma_mask := f_pad_bit(ma_mask, ma_mask_len * 8, '0'B); |
| |
| return { len := ma_mask_len, ma := ma_mask }; |
| } |
| |
| /* Configure the appropriate band for a given arfcn, exc */ |
| private function f_TC_set_band_by_arfcn(integer bts_nr, GsmBandArfcn arfcn) runs on test_CT |
| { |
| var charstring band; |
| var GsmBandArfcn arfcn_ := valueof(ts_GsmBandArfcn(arfcn.arfcn, arfcn.pcs, false)); |
| |
| select (arfcn_) { |
| case (tr_GsmBandArfcn((259..293), false, ?)) { band := "GSM450"; } |
| case (tr_GsmBandArfcn((306..340), false, ?)) { band := "GSM480"; } |
| case (tr_GsmBandArfcn((438..511), false, ?)) { band := "GSM750"; } |
| case (tr_GsmBandArfcn((128..251), false, ?)) { band := "GSM850"; } |
| case (tr_GsmBandArfcn((0..124), false, ?)) { band := "GSM900"; } |
| case (tr_GsmBandArfcn((955..1023), false, ?)) { band := "GSM900"; } |
| case (tr_GsmBandArfcn((512..885), false, ?)) { band := "DCS1800"; } |
| case (tr_GsmBandArfcn((512..810), true, ?)) { band := "PCS1900"; } |
| case else { return; } |
| } |
| |
| f_vty_enter_cfg_bts(BSCVTY, bts_nr); |
| f_vty_transceive(BSCVTY, "band " & band); |
| f_vty_transceive(BSCVTY, "end"); |
| } |
| |
| /* Configure the hopping parameters in accordance with the given record */ |
| private function f_TC_fh_params_set(in FHParamsTrx fhp, |
| uint8_t bts_nr := 0, |
| uint8_t trx_nr := 0) |
| runs on test_CT { |
| |
| f_TC_set_band_by_arfcn(bts_nr, fhp.arfcn); |
| |
| /* Enter the configuration node for the given BTS/TRX numbers */ |
| f_vty_enter_cfg_trx(BSCVTY, bts_nr, trx_nr); |
| |
| f_vty_transceive(BSCVTY, "arfcn " & int2str(fhp.arfcn.arfcn)); |
| |
| for (var integer tn := 0; tn < lengthof(fhp.ts); tn := tn + 1) { |
| f_vty_transceive(BSCVTY, "timeslot " & int2str(tn)); |
| |
| if (not fhp.ts[tn].enabled) { |
| f_vty_transceive(BSCVTY, "hopping enabled 0"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| continue; |
| } |
| |
| /* Configure HSN / MAIO values */ |
| f_vty_transceive(BSCVTY, "hopping sequence-number " & int2str(fhp.ts[tn].hsn)); |
| f_vty_transceive(BSCVTY, "hopping maio " & int2str(fhp.ts[tn].maio)); |
| |
| /* Configure the Mobile Allocation (hopping channels) */ |
| for (var integer i := 0; i < lengthof(fhp.ts[tn].ma); i := i + 1) { |
| f_vty_transceive(BSCVTY, "hopping arfcn add " & int2str(fhp.ts[tn].ma[i])); |
| } |
| |
| f_vty_transceive(BSCVTY, "hopping enabled 1"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| } |
| |
| f_vty_transceive(BSCVTY, "end"); |
| } |
| |
| /* Disable frequency hopping on all timeslots */ |
| private function f_TC_fh_params_unset(in FHParamsTrx fhp, |
| uint8_t bts_nr := 0, |
| uint8_t trx_nr := 0, |
| GsmBandArfcn arfcn := {pcs := false, arfcn := 871}) |
| runs on test_CT { |
| |
| f_TC_set_band_by_arfcn(bts_nr, arfcn); |
| |
| /* Enter the configuration node for the given BTS/TRX numbers */ |
| f_vty_enter_cfg_trx(BSCVTY, bts_nr, trx_nr); |
| |
| f_vty_transceive(BSCVTY, "arfcn " & int2str(arfcn.arfcn)); |
| |
| for (var integer tn := 0; tn < lengthof(fhp.ts); tn := tn + 1) { |
| f_vty_transceive(BSCVTY, "timeslot " & int2str(tn)); |
| |
| /* Delete all ARFCNs from the Mobile Allocation (if any) */ |
| for (var integer i := 0; i < lengthof(fhp.ts[tn].ma); i := i + 1) { |
| f_vty_transceive(BSCVTY, "hopping arfcn del " & int2str(fhp.ts[tn].ma[i])); |
| } |
| |
| f_vty_transceive(BSCVTY, "hopping enabled 0"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| } |
| |
| f_vty_transceive(BSCVTY, "end"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| } |
| |
| /* Verify presence and correctness of the hopping parameters (HSN, MAIO) |
| * in the Channel Identification IE of the RSL CHANnel ACTIVation message. */ |
| testcase TC_fh_params_chan_activ() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(); |
| var RSL_Message rsl_msg; |
| var RSL_IE_Body ie; |
| |
| f_init_vty(); |
| |
| f_TC_fh_params_set(fhp); /* Enable frequency hopping */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1); |
| |
| /* CS domain: 3 (SDCCH/4+CBCH) + 4 (TCH/F) + 2 (TCH/H) channels available */ |
| for (var integer i := 0; i < 9; i := i + 1) { |
| f_ipa_tx(ts_RSL_CHAN_RQD(f_rnd_ra_cs(), 23)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| |
| /* Make sure that Channel Identification IE is present */ |
| if (not f_rsl_find_ie(rsl_msg, RSL_IE_CHAN_IDENT, ie)) { |
| setverdict(fail, "RSL Channel Identification IE is absent"); |
| continue; |
| } |
| |
| /* Make sure that hopping parameters (HSN/MAIO) match */ |
| f_TC_fh_params_match_chan_desc(fhp, ie.chan_ident.ch_desc.v); |
| |
| /* "Mobile Allocation shall be included but empty" - let's check this */ |
| if (ie.chan_ident.ma.v.len != 0) { |
| setverdict(fail, "Mobile Allocation IE is not empty: ", |
| ie.chan_ident.ma, ", despite it shall be"); |
| continue; |
| } |
| } |
| |
| /* Disable frequency hopping */ |
| f_TC_fh_params_unset(fhp); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify the hopping parameters (HSN, MAIO, MA) in (RR) Immediate Assignment */ |
| testcase TC_fh_params_imm_ass() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(); |
| var RSL_Message rsl_msg; |
| var RSL_IE_Body ie; |
| |
| f_init_vty(); |
| |
| f_TC_fh_params_set(fhp); /* Enable frequency hopping */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1); |
| |
| /* CS domain: 3 (SDCCH/4+CBCH) + 4 (TCH/F) + 2 (TCH/H) channels available */ |
| for (var integer i := 0; i < 9; i := i + 1) { |
| f_ipa_tx(ts_RSL_CHAN_RQD(f_rnd_ra_cs(), 23)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeC(RSL_MT_IMMEDIATE_ASSIGN_CMD)); |
| |
| /* Make sure that Full Immediate Assign Info IE is present */ |
| if (not f_rsl_find_ie(rsl_msg, RSL_IE_FULL_IMM_ASS_INFO, ie)) { |
| setverdict(fail, "RSL Full Immediate Assign Info IE is absent"); |
| continue; |
| } |
| |
| /* Decode the actual Immediate Assignment message */ |
| var GsmRrMessage rr_msg := dec_GsmRrMessage(ie.full_imm_ass_info.payload); |
| if (not match(rr_msg.header, t_RrHeader(IMMEDIATE_ASSIGNMENT, ?))) { |
| setverdict(fail, "Failed to match Immediate Assignment: ", rr_msg); |
| continue; |
| } |
| |
| /* Make sure that hopping parameters (HSN/MAIO) match */ |
| f_TC_fh_params_match_chan_desc(fhp, rr_msg.payload.imm_ass.chan_desc); |
| |
| /* Make sure that the Mobile Allocation IE matches */ |
| f_TC_fh_params_match_ma(fhp, rr_msg.payload.imm_ass.chan_desc.chan_nr.tn, |
| rr_msg.payload.imm_ass.mobile_allocation); |
| } |
| |
| /* Disable frequency hopping */ |
| f_TC_fh_params_unset(fhp); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify the hopping parameters (HSN, MAIO, MA) in (RR) Assignment Command */ |
| testcase TC_fh_params_assignment_cmd() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(); |
| var RSL_Message rsl_msg; |
| var RSL_IE_Body ie; |
| |
| f_init_vty(); |
| |
| f_TC_fh_params_set(fhp); /* Enable frequency hopping */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1); |
| |
| /* HACK: work around "Couldn't find Expect for CRCX" */ |
| vc_MGCP[0].stop; |
| |
| var template PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := ts_BSSMAP_IE_CodecList({ts_CodecFR}); |
| |
| /* CS domain (TCH): 4 (TCH/F) + 2 (TCH/H) channels available |
| * NOTE: only 3 SDCCH/4 channels are available on CCCH+SDCCH4+CBCH */ |
| for (var integer i := 0; i < 3; i := i + 1) { |
| /* Establish a dedicated channel, so we can trigger (late) TCH assignment */ |
| var DchanTuple dt := f_est_dchan(f_rnd_ra_cs(), 23, f_rnd_octstring(16)); |
| |
| /* Send a BSSMAP Assignment Command, expect CHANnel ACTIVation */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ass_cmd)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| |
| /* ACKnowledge CHANnel ACTIVation, expect RSL DATA REQuest */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeR(RSL_MT_DATA_REQ)); |
| |
| /* Make sure that L3 Information IE is present */ |
| if (not f_rsl_find_ie(rsl_msg, RSL_IE_L3_INFO, ie)) { |
| setverdict(fail, "RSL L3 Information IE is absent"); |
| continue; |
| } |
| |
| /* Decode the L3 message and make sure it is (RR) Assignment Command */ |
| var GsmRrL3Message l3_msg := dec_GsmRrL3Message(ie.l3_info.payload); |
| if (not match(l3_msg.header, t_RrL3Header(ASSIGNMENT_COMMAND))) { |
| setverdict(fail, "Failed to match Assignment Command: ", l3_msg); |
| continue; |
| } |
| |
| /* Make sure that hopping parameters (HSN/MAIO) match */ |
| var ChannelDescription chan_desc := l3_msg.payload.ass_cmd.chan_desc; |
| f_TC_fh_params_match_chan_desc(fhp, chan_desc); |
| |
| /* Make sure that Cell Channel Description IE is present if FH is enabled */ |
| if (chan_desc.h and not ispresent(l3_msg.payload.ass_cmd.cell_chan_desc)) { |
| setverdict(fail, "FH enabled, but Cell Channel Description IE is absent"); |
| continue; |
| } |
| |
| /* Make sure that the Mobile Allocation IE matches (if present) */ |
| var boolean ma_present := ispresent(l3_msg.payload.ass_cmd.mobile_allocation); |
| if (chan_desc.h and ma_present) { |
| f_TC_fh_params_match_ma(fhp, chan_desc.chan_nr.tn, |
| l3_msg.payload.ass_cmd.mobile_allocation.v); |
| } else if (chan_desc.h and not ma_present) { |
| setverdict(fail, "FH enabled, but Mobile Allocation IE is absent"); |
| continue; |
| } else if (not chan_desc.h and ma_present) { |
| setverdict(fail, "FH disabled, but Mobile Allocation IE is present"); |
| continue; |
| } |
| |
| f_perform_clear_test_ct(dt); |
| } |
| |
| /* Give the IUT some time to release all channels */ |
| f_sleep(3.0); |
| |
| /* Disable frequency hopping */ |
| f_TC_fh_params_unset(fhp); |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify the hopping parameters (HSN, MAIO, MA) in (RR) Handover Command */ |
| private function f_TC_fh_params_handover_cmd(in FHParamsTrx fhp) |
| runs on test_CT { |
| var RSL_Message rsl_msg; |
| var RSL_IE_Body ie; |
| var DchanTuple dt; |
| |
| /* Establish a dedicated channel, so we can trigger handover */ |
| dt := f_est_dchan(f_rnd_ra_cs(), 23, f_rnd_octstring(16)); |
| f_sleep(0.5); |
| |
| /* Trigger handover from BTS0 to BTS1 */ |
| f_bts_0_cfg(BSCVTY, { "neighbor bts 1" }); |
| f_vty_handover(BSCVTY, 0, 0, dt.rsl_chan_nr, 1); |
| |
| /* Expect RSL CHANnel ACTIVation on BTS1/TRX0/TS1 */ |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV), idx := {1, 0}); |
| |
| /* ACKnowledge channel activation and expect (RR) Handover Command */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33), idx := {1, 0}); |
| rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeR(RSL_MT_DATA_REQ)); |
| |
| /* Make sure that L3 Information IE is present */ |
| if (not f_rsl_find_ie(rsl_msg, RSL_IE_L3_INFO, ie)) { |
| setverdict(fail, "RSL L3 Information IE is absent"); |
| return; |
| } |
| |
| /* Decode the L3 message and make sure it is (RR) Handover Command */ |
| var GsmRrL3Message l3_msg := dec_GsmRrL3Message(ie.l3_info.payload); |
| if (not match(l3_msg.header, t_RrL3Header(HANDOVER_COMMAND))) { |
| setverdict(fail, "Failed to match Handover Command: ", l3_msg); |
| return; |
| } |
| |
| /* Make sure that we've got SDCCH/8 on TS1 (expected to be hopping) */ |
| var ChannelDescription chan_desc := l3_msg.payload.ho_cmd.chan_desc; |
| if (not match(chan_desc.chan_nr, t_RslChanNr_SDCCH8(1, ?))) { |
| setverdict(fail, "Unexpected channel number: ", chan_desc.chan_nr); |
| return; |
| } |
| |
| /* Make sure that hopping parameters (HSN/MAIO) match */ |
| f_TC_fh_params_match_chan_desc(fhp, chan_desc); |
| |
| /* Make sure that Cell Channel Description IE is present */ |
| if (not ispresent(l3_msg.payload.ho_cmd.cell_chan_desc)) { |
| setverdict(fail, "FH enabled, but Cell Channel Description IE is absent"); |
| return; |
| } |
| |
| /* Make sure that the Mobile Allocation (after time) IE is present and matches */ |
| var boolean ma_present := ispresent(l3_msg.payload.ho_cmd.mobile_allocation); |
| if (ma_present) { |
| f_TC_fh_params_match_ma(fhp, chan_desc.chan_nr.tn, |
| l3_msg.payload.ho_cmd.mobile_allocation.v); |
| } else { |
| setverdict(fail, "FH enabled, but Mobile Allocation IE is absent"); |
| return; |
| } |
| |
| f_perform_clear_test_ct(dt); |
| } |
| testcase TC_fh_params_handover_cmd() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(); |
| |
| f_init_vty(); |
| |
| /* (Re)configure TS0 as BCCH and TS1 as SDCCH8 on BTS1/TRX0 */ |
| f_vty_enter_cfg_trx(BSCVTY, bts := 1, trx := 0); |
| |
| f_vty_transceive(BSCVTY, "timeslot 0"); |
| f_vty_transceive(BSCVTY, "phys_chan_config ccch"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| |
| f_vty_transceive(BSCVTY, "timeslot 1"); |
| f_vty_transceive(BSCVTY, "phys_chan_config sdcch8"); |
| f_vty_transceive(BSCVTY, "end"); /* we're done */ |
| |
| f_TC_fh_params_set(fhp, 1); /* Enable frequency hopping on BTS1 */ |
| f_vty_transceive(BSCVTY, "drop bts connection 1 oml"); |
| |
| f_init(2); |
| |
| f_TC_fh_params_handover_cmd(fhp); |
| |
| /* Disable frequency hopping on BTS1 */ |
| f_TC_fh_params_unset(fhp, 1); |
| |
| /* (Re)configure TS0 as CCCH+SDCCH4+CBCH and TS1 as TCH/F */ |
| f_vty_enter_cfg_trx(BSCVTY, bts := 1, trx := 0); |
| |
| f_vty_transceive(BSCVTY, "timeslot 0"); |
| f_vty_transceive(BSCVTY, "phys_chan_config ccch+sdcch4+cbch"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| |
| f_vty_transceive(BSCVTY, "timeslot 1"); |
| f_vty_transceive(BSCVTY, "phys_chan_config tch/f"); |
| f_vty_transceive(BSCVTY, "end"); /* we're done */ |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify the hopping parameters in System Information Type 4 */ |
| testcase TC_fh_params_si4_cbch() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(tr_tn := 1); |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| timer T := 5.0; |
| |
| f_init_vty(); |
| |
| /* (Re)configure TS0 as BCCH and TS1 as SDCCH8+CBCH */ |
| f_vty_enter_cfg_trx(BSCVTY, trx := 0); |
| |
| f_vty_transceive(BSCVTY, "timeslot 0"); |
| f_vty_transceive(BSCVTY, "phys_chan_config ccch"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| |
| f_vty_transceive(BSCVTY, "timeslot 1"); |
| f_vty_transceive(BSCVTY, "phys_chan_config sdcch8+cbch"); |
| f_vty_transceive(BSCVTY, "end"); /* we're done */ |
| |
| f_TC_fh_params_set(fhp); /* Enable frequency hopping */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1); |
| |
| T.start; |
| alt { |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO(RSL_SYSTEM_INFO_4))) -> value rx_rsl_ud { |
| var RSL_IE_Body ie := rx_rsl_ud.rsl.ies[2].body; /* FULL BCCH Information IE */ |
| var SystemInformation si := dec_SystemInformation(ie.other.payload); |
| |
| /* Make sure that what we decoded is System Information Type 4 */ |
| if (si.header.message_type != SYSTEM_INFORMATION_TYPE_4) { |
| setverdict(fail, "RSL FULL BCCH Information IE contains: ", si); |
| repeat; |
| } |
| |
| /* Make sure that CBCH Channel Description IE is present */ |
| if (not ispresent(si.payload.si4.cbch_chan_desc)) { |
| setverdict(fail, "CBCH Channel Description IE is absent"); |
| break; |
| } |
| |
| /* Finally, check the hopping parameters (HSN, MAIO) */ |
| var ChannelDescription chan_desc := si.payload.si4.cbch_chan_desc.v; |
| f_TC_fh_params_match_chan_desc(fhp, chan_desc); |
| |
| /* 3GPP TS 44.018, section 9.1.36.2 "CBCH Mobile Allocation": |
| * The CBCH Mobile Allocation IE *shall* be present if FH is enabled. */ |
| if (chan_desc.h and not ispresent(si.payload.si4.cbch_mobile_alloc)) { |
| setverdict(fail, "FH enabled, but Mobile Allocation IE is absent"); |
| break; |
| } else if (chan_desc.h and ispresent(si.payload.si4.cbch_mobile_alloc)) { |
| f_TC_fh_params_match_ma(fhp, chan_desc.chan_nr.tn, |
| si.payload.si4.cbch_mobile_alloc.v); |
| } |
| } |
| [] IPA_RSL[0][0].receive { repeat; } |
| [] T.timeout { |
| setverdict(fail, "Timeout waiting for RSL BCCH INFOrmation (SI4)"); |
| } |
| } |
| |
| /* Disable frequency hopping */ |
| f_TC_fh_params_unset(fhp); |
| |
| /* (Re)configure TS0 as CCCH+SDCCH4+CBCH and TS1 as TCH/F */ |
| f_vty_enter_cfg_trx(BSCVTY, trx := 0); |
| |
| f_vty_transceive(BSCVTY, "timeslot 0"); |
| f_vty_transceive(BSCVTY, "phys_chan_config ccch+sdcch4+cbch"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| |
| f_vty_transceive(BSCVTY, "timeslot 1"); |
| f_vty_transceive(BSCVTY, "phys_chan_config tch/f"); |
| f_vty_transceive(BSCVTY, "end"); /* we're done */ |
| |
| f_shutdown_helper(); |
| } |
| |
| template (value) PDU_BSSAP_LE ts_BSSMAP_LE_BSSLAP(template (value) BSSLAP_PDU bsslap) |
| := ts_BSSMAP_LE_ConnInfo(BSSMAP_LE_PROT_BSSLAP, data := enc_BSSLAP_PDU(valueof(bsslap))); |
| |
| private function f_match_bsslap(PDU_BSSAP_LE got_bsslap_msg, |
| template (present) BSSLAP_PDU expect_bsslap) |
| { |
| var BSSLAP_PDU bsslap := dec_BSSLAP_PDU(got_bsslap_msg.pdu.bssmap.co_info.bsslap_apdu.data); |
| if (not match(bsslap, expect_bsslap)) { |
| log("EXPECTING BSSLAP: ", expect_bsslap); |
| log("GOT BSSLAP: ", bsslap); |
| setverdict(fail, "BSSLAP is not as expected"); |
| mtc.stop; |
| } |
| setverdict(pass); |
| } |
| |
| /* GAD: this is an Ellipsoid point with uncertainty circle, encoded as in 3GPP TS 23.032 §7.3.2. */ |
| const octetstring gad_ell_point_unc_circle := '10b0646d0d5f6627'O; |
| |
| private function f_expect_bsslap(template (present) BSSLAP_PDU expect_rx_bsslap) runs on MSC_ConnHdlr { |
| var PDU_BSSAP_LE rx_bsslap; |
| BSSAP_LE.receive(tr_BSSMAP_LE_ConnInfo(BSSMAP_LE_PROT_BSSLAP, ?)) -> value(rx_bsslap); |
| f_match_bsslap(rx_bsslap, expect_rx_bsslap); |
| } |
| |
| /* With an active lchan, start BSSMAP Perform Location Request on A interface, starting BSSMAP-LE Perform Location |
| * Request on Lb interface. Either with or without the SMLC doing a BSSLAP TA Request. */ |
| private function f_lcs_loc_req_for_active_ms(boolean do_ta_request := false) runs on MSC_ConnHdlr { |
| f_sleep(1.0); |
| |
| f_establish_fully(omit, omit); |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| |
| BSSAP.send(valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('262'H, '42'H, 23, 42)))); |
| |
| var PDU_BSSAP_LE plr; |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)) -> value(plr); |
| |
| if (not do_ta_request) { |
| /* verify TA Layer 3 in APDU. First the APDU type (BSSLAP), then the BSSLAP data contents. */ |
| var template BSSMAP_LE_IE_APDU expect_apdu := tr_BSSMAP_LE_APDU(BSSMAP_LE_PROT_BSSLAP, ?); |
| if (not match(plr.pdu.bssmap.perf_loc_req.bsslap_apdu, expect_apdu)) { |
| log("EXPECTING BSSMAP-LE APDU IE ", expect_apdu); |
| log("GOT BSSMAP-LE APDU IE ", plr.pdu.bssmap.perf_loc_req.bsslap_apdu); |
| setverdict(fail, "BSSMAP-LE APDU IE is not as expected"); |
| mtc.stop; |
| } |
| var template BSSLAP_PDU expect_ta_layer3 := tr_BSSLAP_TA_Layer3(tr_BSSLAP_IE_TA(0)); |
| var BSSLAP_PDU bsslap := dec_BSSLAP_PDU(plr.pdu.bssmap.perf_loc_req.bsslap_apdu.data); |
| if (not match(bsslap, expect_ta_layer3)) { |
| log("EXPECTING BSSLAP TA Layer 3: ", expect_ta_layer3); |
| log("GOT BSSLAP: ", bsslap); |
| setverdict(fail, "BSSLAP is not as expected"); |
| mtc.stop; |
| } |
| /* OsmoBSC directly sent the TA as BSSLAP APDU in the BSSMAP-LE Perform Location Request to the SMLC. The SMLC |
| * has no need to request the TA from the BSC and directly responds. */ |
| } else { |
| /* SMLC wants to ask the TA from the BSC explicitly in a BSSLAP TA Request message */ |
| BSSAP_LE.send(ts_BSSMAP_LE_BSSLAP(ts_BSSLAP_TA_Req)); |
| f_expect_bsslap(tr_BSSLAP_TA_Resp(?, ?)); |
| } |
| |
| /* SMLC got the TA from the BSC, now responds with geo information data. */ |
| BSSAP_LE.send(ts_BSSMAP_LE_PerfLocResp(gad_ell_point_unc_circle, omit)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response(tr_BSSMAP_IE_LocationEstimate(gad_ell_point_unc_circle))); |
| |
| /* The LCS was using an active A-interface conn. It should still remain active after this. */ |
| f_mo_l3_transceive(); |
| |
| f_perform_clear(); |
| |
| f_sleep(2.0); |
| setverdict(pass); |
| } |
| |
| /* With an active lchan, start BSSMAP Perform Location Request on A interface, starting BSSMAP-LE Perform Location |
| * Request on Lb interface. Without the SMLC doing a BSSLAP TA Request. */ |
| private function f_tc_lcs_loc_req_for_active_ms(charstring id) runs on MSC_ConnHdlr { |
| f_lcs_loc_req_for_active_ms(false); |
| } |
| testcase TC_lcs_loc_req_for_active_ms() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_lcs_loc_req_for_active_ms), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* With an active lchan, start BSSMAP Perform Location Request on A interface, starting BSSMAP-LE Perform Location |
| * Request on Lb interface. With the SMLC doing a BSSLAP TA Request. */ |
| private function f_tc_lcs_loc_req_for_active_ms_ta_req(charstring id) runs on MSC_ConnHdlr { |
| f_lcs_loc_req_for_active_ms(true); |
| } |
| testcase TC_lcs_loc_req_for_active_ms_ta_req() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_lcs_loc_req_for_active_ms_ta_req), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* Clear the A-interface conn only, without doing anything on Abis. Useful for LCS, for cases where there is only an A |
| * conn without an active lchan. */ |
| private function f_clear_A_conn() runs on MSC_ConnHdlr |
| { |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| |
| timer no_more_bssap := 5.0; |
| no_more_bssap.start; |
| alt { |
| [] no_more_bssap.timeout { break; } |
| [] BSSAP.receive(tr_BSSAP_BSSMAP) { |
| setverdict(fail, "Expected no more BSSAP after Clear Complete"); |
| mtc.stop; |
| } |
| } |
| setverdict(pass); |
| } |
| |
| /* Verify that the A-interface connection is still working, and then clear it, without doing anything on Abis. Useful |
| * for LCS, for cases where there is only an A conn without an active lchan. */ |
| private function f_verify_active_A_conn_and_clear() runs on MSC_ConnHdlr |
| { |
| f_logp(BSCVTY, "f_verify_active_A_conn_and_clear: test A link, then clear"); |
| |
| /* When an lchan is active, we can send some L3 data from the BTS side and verify that it shows up on the other |
| * side towards the MSC. When there is no lchan, this is not possible. To probe whether the A-interface |
| * connection is still up, we need something that echos back on the A-interface. Another LCS request! */ |
| BSSAP.send(valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('262'H, '42'H, 23, 42)))); |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)); |
| |
| /* Right, the Perform Location Request showed up on Lb, now we can clear the A conn. */ |
| f_clear_A_conn(); |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocAbort(BSSMAP_LE_LCS_CAUSE_REQUEST_ABORTED)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| } |
| |
| /* With *no* active lchan, start BSSMAP Perform Location Request on A interface, starting BSSMAP-LE Perform Location |
| * Request on Lb interface. BSC will Page for the subscriber as soon as we (virtual SMLC) request the TA via BSSLAP. |
| */ |
| private function f_tc_lcs_loc_req_for_idle_ms(charstring id) runs on MSC_ConnHdlr { |
| f_sleep(1.0); |
| |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| |
| /* Register to receive the Paging Command */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| g_chan_nr := new_chan_nr; |
| f_rslem_register(0, g_chan_nr); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('001'H, '01'H, 1, 0))))); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| var PDU_BSSAP_LE plr; |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)) -> value(plr); |
| |
| /* SMLC wants to ask the TA from the BSC explicitly in a BSSLAP TA Request message */ |
| BSSAP_LE.send(ts_BSSMAP_LE_BSSLAP(ts_BSSLAP_TA_Req)); |
| |
| /* OsmoBSC needs to Page */ |
| RSL.receive(tr_RSL_PAGING_CMD(tr_MI_IMSI(g_pars.imsi))); |
| f_logp(BSCVTY, "got Paging Command"); |
| |
| /* MS requests channel. Since the Paging was for LCS, the Paging Response does not trigger a Complete Layer 3 to |
| * the MSC, and releases the lchan directly. */ |
| f_perform_compl_l3(RSL, RSL_PROC, ts_PAG_RESP(valueof(ts_MI_IMSI_LV(g_pars.imsi))), do_clear := false, expect_bssmap_l3 := false); |
| f_expect_lchan_rel(RSL, RSL_PROC); |
| |
| /* From the Paging Response, the TA is now known to the BSC, and it responds to the SMLC. */ |
| |
| f_expect_bsslap(tr_BSSLAP_TA_Resp(?, ?)); |
| |
| /* SMLC got the TA from the BSC, now responds with geo information data. */ |
| BSSAP_LE.send(ts_BSSMAP_LE_PerfLocResp(gad_ell_point_unc_circle, omit)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response(tr_BSSMAP_IE_LocationEstimate(gad_ell_point_unc_circle))); |
| |
| /* The lchan is gone, the A-interface conn was created for the LCS only. |
| * Still it is clearly the MSC's job to decide whether to tear down the conn or not. */ |
| f_verify_active_A_conn_and_clear(); |
| |
| f_sleep(2.0); |
| setverdict(pass); |
| } |
| testcase TC_lcs_loc_req_for_idle_ms() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_lcs_loc_req_for_idle_ms), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* With no active lchan, start BSSMAP Perform Location Request on A interface, but omit IMSI; expect failure response. |
| */ |
| private function f_tc_lcs_loc_req_no_subscriber(charstring id) runs on MSC_ConnHdlr { |
| f_sleep(1.0); |
| |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| |
| /* provoke an abort by omitting both IMSI and IMEI */ |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| valueof(ts_BSSMAP_Perform_Location_Request(omit, |
| ts_CellId_CGI('262'H, '42'H, 23, 42))))); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* BSC tells MSC about failure */ |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response( |
| locationEstimate := omit, positioningData := omit, |
| lCS_Cause := tr_BSSMAP_LcsCause(BSSMAP_LCS_CAUSE_DATA_MISSING_IN_REQ))); |
| |
| /* There is no lchan. Still the MSC's job to decide whether to tear down the conn or not. */ |
| f_verify_active_A_conn_and_clear(); |
| |
| f_sleep(2.0); |
| setverdict(pass); |
| } |
| testcase TC_lcs_loc_req_no_subscriber() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_lcs_loc_req_no_subscriber), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* With an active lchan, start a Perform Location Request on the A-interface, but virtual SMLC does not answer with |
| * BSSMAP-LE Perform Location Response (before or after sending a BSSLAP TA Request) */ |
| private function f_lcs_loc_req_for_active_ms_le_timeout(boolean do_ta) runs on MSC_ConnHdlr { |
| f_sleep(1.0); |
| |
| f_establish_fully(omit, omit); |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| |
| BSSAP.send(valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('262'H, '42'H, 23, 42)))); |
| |
| var PDU_BSSAP_LE plr; |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)) -> value(plr); |
| |
| if (do_ta) { |
| /* SMLC wants to ask the TA from the BSC explicitly in a BSSLAP TA Request message */ |
| BSSAP_LE.send(ts_BSSMAP_LE_BSSLAP(ts_BSSLAP_TA_Req)); |
| f_expect_bsslap(tr_BSSLAP_TA_Resp(?, ?)); |
| } |
| |
| /* SMLC fails to respond, BSC runs into timeout */ |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocAbort(BSSMAP_LE_LCS_CAUSE_SYSTEM_FAILURE)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response( |
| locationEstimate := omit, positioningData := omit, |
| lCS_Cause := tr_BSSMAP_LcsCause(BSSMAP_LCS_CAUSE_SYSTEM_FAILURE))); |
| |
| /* There is no lchan. Still the MSC's job to decide whether to tear down the conn or not. */ |
| f_verify_active_A_conn_and_clear(); |
| |
| f_sleep(2.0); |
| setverdict(pass); |
| } |
| |
| /* With an active lchan, start a Perform Location Request on the A-interface, but virtual SMLC does not answer with |
| * BSSMAP-LE Perform Location Response, without sending a BSSLAP TA Request. */ |
| private function f_tc_lcs_loc_req_for_active_ms_le_timeout(charstring id) runs on MSC_ConnHdlr { |
| f_lcs_loc_req_for_active_ms_le_timeout(false); |
| } |
| |
| testcase TC_lcs_loc_req_for_active_ms_le_timeout() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_lcs_loc_req_for_active_ms_le_timeout), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* With an active lchan, start a Perform Location Request on the A-interface, but virtual SMLC does not answer with |
| * BSSMAP-LE Perform Location Response, after sending a BSSLAP TA Request. */ |
| private function f_tc_lcs_loc_req_for_active_ms_le_timeout2(charstring id) runs on MSC_ConnHdlr { |
| f_lcs_loc_req_for_active_ms_le_timeout(true); |
| } |
| |
| testcase TC_lcs_loc_req_for_active_ms_le_timeout2() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_lcs_loc_req_for_active_ms_le_timeout2), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* With *no* active lchan, start a Perform Location Request, expecting that the MS will be Paged. */ |
| private function f_tc_lcs_loc_req_for_idle_ms_no_pag_resp(charstring id) runs on MSC_ConnHdlr { |
| f_sleep(1.0); |
| |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| |
| /* Register to receive the Paging Command */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| g_chan_nr := new_chan_nr; |
| f_rslem_register(0, g_chan_nr); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('001'H, '01'H, 1, 0))))); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| var PDU_BSSAP_LE plr; |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)) -> value(plr); |
| |
| /* SMLC wants to ask the TA from the BSC explicitly in a BSSLAP TA Request message */ |
| BSSAP_LE.send(ts_BSSMAP_LE_BSSLAP(ts_BSSLAP_TA_Req)); |
| |
| /* OsmoBSC needs to Page */ |
| var PDU_BSSAP_LE rx_bsslap; |
| alt { |
| [] RSL.receive(tr_RSL_PAGING_CMD(tr_MI_IMSI(g_pars.imsi))) { |
| f_logp(BSCVTY, "got Paging Command"); |
| repeat; |
| } |
| [] BSSAP_LE.receive(tr_BSSMAP_LE_ConnInfo(BSSMAP_LE_PROT_BSSLAP, ?)) -> value(rx_bsslap) { |
| /* MS does not respond to Paging, TA Req runs into timeout. */ |
| f_match_bsslap(rx_bsslap, tr_BSSLAP_Abort(?)); |
| } |
| } |
| |
| /* SMLC responds with failure */ |
| BSSAP_LE.send(ts_BSSMAP_LE_PerfLocResp(omit, BSSMAP_LE_LCS_CAUSE_REQUEST_ABORTED)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| |
| /* BSC tells MSC about failure */ |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response( |
| locationEstimate := omit, positioningData := omit, |
| lCS_Cause := tr_BSSMAP_LcsCause(BSSMAP_LCS_CAUSE_REQUEST_ABORTED))); |
| |
| /* There is no lchan. Still the MSC's job to decide whether to tear down the conn or not. */ |
| f_verify_active_A_conn_and_clear(); |
| |
| f_sleep(2.0); |
| setverdict(pass); |
| } |
| testcase TC_lcs_loc_req_for_idle_ms_no_pag_resp() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_lcs_loc_req_for_idle_ms_no_pag_resp), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* During an ongoing Location Request, the MS sends a CM Service Request. Expect the same A-conn to be re-used / taken |
| * over. */ |
| private function f_tc_cm_service_during_lcs_loc_req(charstring id) runs on MSC_ConnHdlr { |
| f_sleep(1.0); |
| |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| |
| /* Register to receive the Paging Command */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| g_chan_nr := new_chan_nr; |
| f_rslem_register(0, g_chan_nr); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('001'H, '01'H, 1, 0))))); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| var PDU_BSSAP_LE plr; |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)) -> value(plr); |
| |
| /* As the A-interface conn was established for LCS, the MS coincidentally decides to issue a CM Service Request |
| * and establish Layer 3. It should use the existing A-interface conn. */ |
| f_perform_compl_l3(RSL, RSL_PROC, valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV(g_pars.imsi)))), |
| do_clear := false, expect_bssmap_l3 := true); |
| |
| /* SMLC wants to ask the TA from the BSC explicitly in a BSSLAP TA Request message */ |
| BSSAP_LE.send(ts_BSSMAP_LE_BSSLAP(ts_BSSLAP_TA_Req)); |
| |
| /* OsmoBSC already has an lchan, no need to Page, just returns the TA */ |
| f_expect_bsslap(tr_BSSLAP_TA_Resp(?, ?)); |
| |
| /* SMLC got the TA from the BSC, now responds with geo information data. */ |
| BSSAP_LE.send(ts_BSSMAP_LE_PerfLocResp(gad_ell_point_unc_circle, omit)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response(tr_BSSMAP_IE_LocationEstimate(gad_ell_point_unc_circle))); |
| |
| /* The lchan should still exist, it was from a CM Service Request. */ |
| f_mo_l3_transceive(); |
| |
| f_perform_clear(); |
| |
| f_sleep(2.0); |
| setverdict(pass); |
| } |
| testcase TC_cm_service_during_lcs_loc_req() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_cm_service_during_lcs_loc_req), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* During an ongoing Perform Location Request, do a Handover, an expect a BSSLAP Reset message from the BSC to indicate |
| * the new lchan after handover. */ |
| private function f_tc_ho_during_lcs_loc_req(charstring id) runs on MSC_ConnHdlr { |
| f_sleep(1.0); |
| |
| f_establish_fully(omit, omit); |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| |
| BSSAP.send(valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('262'H, '42'H, 23, 42)))); |
| |
| var PDU_BSSAP_LE plr; |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)) -> value(plr); |
| |
| /* SMLC ponders the Location Request, in the meantime the BSC decides to handover */ |
| f_bts_0_cfg(BSCVTY, {"neighbor bts 1"}); |
| |
| var HandoverState hs := { |
| rr_ho_cmpl_seen := false, |
| handover_done := false, |
| old_chan_nr := -, |
| expect_target_tsc := c_BtsParams[1].tsc |
| }; |
| /* issue hand-over command on VTY */ |
| f_vty_handover(BSCVTY, 0, 0, g_chan_nr, 1); |
| /* temporarily suspend DChan processing on BTS1 to avoid race with RSLEM_register */ |
| f_rslem_suspend(RSL1_PROC); |
| |
| /* From the MGW perspective, a handover is is characterized by |
| * performing one MDCX operation with the MGW. So we expect to see |
| * one more MDCX during handover. */ |
| g_media.mgcp_conn[0].mdcx_seen_exp := g_media.mgcp_conn[0].crcx_seen_exp + 1; |
| |
| alt { |
| [] as_handover(hs); |
| } |
| |
| var PDU_BSSAP_LE rx_bsslap; |
| |
| interleave { |
| /* Expect the BSC to inform the MSC about the handover */ |
| [] BSSAP.receive(tr_BSSMAP_HandoverPerformed); |
| |
| /* Expect the BSC to inform the SMLC about the handover */ |
| [] BSSAP_LE.receive(tr_BSSMAP_LE_ConnInfo(BSSMAP_LE_PROT_BSSLAP, ?)) -> value(rx_bsslap) { |
| f_match_bsslap(rx_bsslap, tr_BSSLAP_Reset(BSSLAP_CAUSE_INTRA_BSS_HO)); |
| } |
| } |
| |
| /* SMLC now responds with geo information data. */ |
| BSSAP_LE.send(ts_BSSMAP_LE_PerfLocResp(gad_ell_point_unc_circle, omit)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response(tr_BSSMAP_IE_LocationEstimate(gad_ell_point_unc_circle))); |
| |
| /* lchan still active */ |
| f_mo_l3_transceive(RSL1); |
| |
| /* MSC decides it is done now. */ |
| f_perform_clear(RSL1, RSL1_PROC); |
| |
| f_sleep(2.0); |
| setverdict(pass); |
| } |
| testcase TC_ho_during_lcs_loc_req() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(2, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ho_during_lcs_loc_req), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_emerg_call_and_lcs_loc_req(charstring id) runs on MSC_ConnHdlr |
| { |
| /* Make sure the CHAN RQD indicates an emergency call (0b101xxxxx). The difference is that osmo-bsc directly |
| * assigns a TCH lchan and establishing voice for the emergency call will use Mode Modify, not reassignment to |
| * another lchan. */ |
| g_pars.ra := 'b7'O; |
| f_assignment_emerg_setup(); |
| |
| var PDU_BSSAP emerg_setup_data_ind_bssap; |
| timer T := 3.0; |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DTAP) -> value emerg_setup_data_ind_bssap { |
| var PDU_ML3_MS_NW verify_emerg_setup; |
| verify_emerg_setup := dec_PDU_ML3_MS_NW(emerg_setup_data_ind_bssap.pdu.dtap); |
| if (not isbound(verify_emerg_setup.msgs.cc.emergencySetup)) { |
| setverdict(fail, "no emergency setup"); |
| } |
| } |
| [] BSSAP.receive { |
| setverdict(fail, "unexpected BSSAP message!"); |
| } |
| [] T.timeout { |
| setverdict(fail, "timeout waiting for EMERGENCY SETUP!"); |
| } |
| } |
| |
| /* Here would usually be a CC Call Proceeding from the MSC, but what does the BSC care about DTAP. */ |
| |
| /* Do a Location Request in-between the CC call setup */ |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| BSSAP.send(valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('262'H, '42'H, 23, 42)))); |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)); |
| /* SMLC got the TA from the BSC, now responds with geo information data. */ |
| BSSAP_LE.send(ts_BSSMAP_LE_PerfLocResp(gad_ell_point_unc_circle, omit)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response(tr_BSSMAP_IE_LocationEstimate(gad_ell_point_unc_circle))); |
| |
| /* Go on with voice call assignment */ |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| /* Below speechOrDataIndicator and codecList are copied from an emergency call captured during tests. |
| * They seem a bit weird (AMR-WB, and the order differ between speechId_DataIndicator and the codecList), but |
| * seems a good idea to see how osmo-bsc reacts to this. */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := { |
| elementIdentifier := '0B'O, /* overwritten */ |
| lengthIndicator := 0, /* overwritten */ |
| speechOrDataIndicator := '0001'B, /* speech */ |
| spare1_4 := '0000'B, |
| channelRateAndType := ChRate_TCHForH_Fpref, |
| speechId_DataIndicator := 'c2918105'O |
| }; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ |
| ts_CodecHR, ts_CodecAMR_WB, ts_CodecEFR, ts_CodecFR})); |
| |
| f_rslem_dchan_queue_enable(); |
| |
| var ExpectCriteria mgcpcrit := { |
| connid := omit, |
| endpoint := omit, |
| transid := omit |
| }; |
| f_create_mgcp_expect(mgcpcrit); |
| |
| BSSAP.send(ass_cmd); |
| |
| var AssignmentState st := valueof(ts_AssignmentStateInit); |
| st.voice_call := true; |
| st.is_assignment := false; |
| alt { |
| [] as_modify(st); |
| [] as_Media(); |
| [st.modify_done] BSSAP.receive(exp_compl) { |
| setverdict(pass); |
| } |
| } |
| |
| /* Voice call carries on ... */ |
| f_sleep(2.0); |
| |
| setverdict(pass); |
| f_perform_clear(); |
| } |
| |
| testcase TC_emerg_call_and_lcs_loc_req() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(true, 0); |
| vc_conn := f_start_handler(refers(f_tc_emerg_call_and_lcs_loc_req), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| private altstep no_bssmap_clear_req() runs on MSC_ConnHdlr { |
| [] BSSAP.receive(tr_BSSMAP_ClearRequest) { |
| setverdict(fail, "unexpected BSSMAP Clear Request"); |
| mtc.stop; |
| } |
| } |
| |
| private type enumerated RslRel { |
| RSLREL_REL_IND, |
| RSLREL_CONN_FAIL |
| }; |
| |
| private function f_emerg_call_and_lcs_loc_req_early_lchan_release(RslRel rsl_rel) runs on MSC_ConnHdlr |
| { |
| g_pars.ra := f_rnd_ra_emerg(); |
| f_assignment_emerg_setup(); |
| |
| var PDU_BSSAP emerg_setup_data_ind_bssap; |
| timer T := 3.0; |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DTAP) -> value emerg_setup_data_ind_bssap { |
| var PDU_ML3_MS_NW verify_emerg_setup; |
| verify_emerg_setup := dec_PDU_ML3_MS_NW(emerg_setup_data_ind_bssap.pdu.dtap); |
| if (not ischosen(verify_emerg_setup.msgs.cc.emergencySetup)) { |
| setverdict(fail, "no emergency setup"); |
| } |
| } |
| [] BSSAP.receive { |
| setverdict(fail, "unexpected BSSAP message!"); |
| } |
| [] T.timeout { |
| setverdict(fail, "timeout waiting for EMERGENCY SETUP!"); |
| } |
| } |
| |
| /* Start a Location Request to locate the emergency */ |
| f_bssap_le_register_imsi(g_pars.imsi, omit); |
| BSSAP.send(valueof(ts_BSSMAP_Perform_Location_Request(ts_BSSMAP_Imsi(g_pars.imsi), |
| ts_CellId_CGI('262'H, '42'H, 23, 42)))); |
| BSSAP_LE.receive(tr_BSSMAP_LE_PerfLocReq(BSSMAP_LE_LOC_INFO_CURRENT_GEOGRAPHIC_LOC, ?, ?)); |
| |
| /* As long as this LCS is going on, the BSC should not send any Clear Request. Later on, it is up to the MSC to |
| * do a Clear Command when the Location Response arrives. */ |
| activate(no_bssmap_clear_req()); |
| |
| /* the lchan gets interrupted while the Location Request has no response */ |
| select (rsl_rel) { |
| case (RSLREL_REL_IND) { |
| RSL.send(ts_RSL_REL_IND(g_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); |
| f_expect_lchan_rel(RSL, RSL_PROC); |
| } |
| case (RSLREL_CONN_FAIL) { |
| RSL.send(ts_RSL_CONN_FAIL_IND(g_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| } |
| case else { |
| setverdict(fail, "Unknown RslRel type"); |
| mtc.stop; |
| } |
| } |
| |
| /* Still expect the Location Response to find its way to the MSC. */ |
| BSSAP_LE.send(ts_BSSMAP_LE_PerfLocResp(gad_ell_point_unc_circle, omit)); |
| BSSAP_LE.receive(BSSAP_LE_Conn_Prim:CONN_PRIM_DISC_IND); |
| BSSAP.receive(tr_BSSMAP_Perform_Location_Response(tr_BSSMAP_IE_LocationEstimate(gad_ell_point_unc_circle))); |
| |
| setverdict(pass); |
| |
| select (rsl_rel) { |
| case (RSLREL_REL_IND) { |
| f_perform_clear_no_lchan(); |
| } |
| case (RSLREL_CONN_FAIL) { |
| f_perform_clear(); |
| } |
| } |
| } |
| |
| private function f_tc_emerg_call_and_lcs_loc_req_early_lchan_rel_ind(charstring id) runs on MSC_ConnHdlr |
| { |
| f_emerg_call_and_lcs_loc_req_early_lchan_release(RSLREL_REL_IND); |
| } |
| |
| testcase TC_emerg_call_and_lcs_loc_req_early_lchan_rel_ind() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(true, 0); |
| vc_conn := f_start_handler(refers(f_tc_emerg_call_and_lcs_loc_req_early_lchan_rel_ind), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| private function f_tc_emerg_call_and_lcs_loc_req_early_lchan_conn_fail(charstring id) runs on MSC_ConnHdlr |
| { |
| f_emerg_call_and_lcs_loc_req_early_lchan_release(RSLREL_CONN_FAIL); |
| } |
| |
| testcase TC_emerg_call_and_lcs_loc_req_early_lchan_conn_fail() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(true, 0); |
| vc_conn := f_start_handler(refers(f_tc_emerg_call_and_lcs_loc_req_early_lchan_conn_fail), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* Attempt Complete Layer 3 without any MSC available (OS#4832) */ |
| private function f_tc_no_msc(charstring id) runs on MSC_ConnHdlr { |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| |
| /* Also disable attach for the single connected MSC */ |
| f_vty_msc_allow_attach(BSCVTY, { false }); |
| |
| var octetstring l3_enc := enc_PDU_ML3_MS_NW(valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000100001'H)), '00F110'O) )); |
| f_chan_est(g_pars.ra, l3_enc, g_pars.link_id, g_pars.fn); |
| |
| /* No MSC is found, expecting a proper release on RSL */ |
| interleave { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE)) { |
| f_logp(BSCVTY, "Got RSL RR Release"); |
| } |
| [] RSL.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) { |
| f_logp(BSCVTY, "Got RSL Deact SACCH"); |
| } |
| [] RSL.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)) { |
| f_logp(BSCVTY, "Got RSL RF Chan Rel, sending Rel Ack"); |
| RSL.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| f_rslem_unregister(0, g_chan_nr); |
| } |
| } |
| setverdict(pass); |
| } |
| testcase TC_no_msc() runs on test_CT { |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_ctrs_bsc_init(counternames_bsc_mscpool); |
| |
| vc_conn := f_start_handler(refers(f_tc_no_msc), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_add("mscpool:subscr:no_msc"); |
| f_ctrs_bsc_verify(); |
| f_shutdown_helper(); |
| } |
| |
| /* Dyn PDCH todo: |
| * activate OSMO as TCH/F |
| * activate OSMO as TCH/H |
| * does the BSC-located PCU socket get the updated INFO? |
| * what if no PCU is connected at the time? |
| * is the info correct on delayed PCU (re)connect? |
| */ |
| |
| private function f_TC_refuse_mode_modif_to_vamos(charstring id) runs on MSC_ConnHdlr { |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(g_pars.use_osmux_cn); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| |
| /* puzzle together the ASSIGNMENT REQ for given codec[s] */ |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := g_pars.ass_codec_list; |
| exp_compl.pdu.bssmap.assignmentComplete.speechCodec.codecElements[0] := |
| g_pars.ass_codec_list.codecElements[0]; |
| if (isvalue(g_pars.expect_mr_s0_s7)) { |
| exp_compl.pdu.bssmap.assignmentComplete.speechCodec.codecElements[0].s0_7 := |
| g_pars.expect_mr_s0_s7; |
| } |
| } |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := |
| f_BSSMAP_chtype_from_codec(g_pars.ass_codec_list.codecElements[0]); |
| log("expecting ASS COMPL like this: ", exp_compl); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 1 sub-slot 0 modify vamos tsc 2 3"); |
| |
| var RSL_Message rsl; |
| |
| timer T := 5.0; |
| T.start; |
| alt { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr)) -> value rsl { |
| var PDU_ML3_NW_MS l3 := dec_PDU_ML3_NW_MS(rsl.ies[2].body.l3_info.payload); |
| log("Rx L3 from net: ", l3); |
| if (ischosen(l3.msgs.rrm.channelModeModify)) { |
| setverdict(fail, "Mode Modify to VAMOS succeeded even though BTS does not support VAMOS"); |
| mtc.stop; |
| } |
| } |
| [] RSL.receive(tr_RSL_MODE_MODIFY_REQ(g_chan_nr, ?)) -> value rsl { |
| setverdict(fail, "Mode Modify to VAMOS succeeded even though BTS does not support VAMOS"); |
| mtc.stop; |
| } |
| [] T.timeout { |
| /* The BTS does not exhibit BTS_FEAT_VAMOS, so no VAMOS related Mode Modify should happen. */ |
| setverdict(pass); |
| } |
| } |
| T.stop; |
| |
| f_perform_clear(); |
| } |
| |
| /* The BSC does *not* indicate BTS_FEAT_VAMOS; make sure that a channel Mode Modify to VAMOS mode is refused by |
| * osmo-bsc. */ |
| testcase TC_refuse_mode_modif_to_vamos() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| vc_conn := f_start_handler(refers(f_TC_refuse_mode_modif_to_vamos), pars); |
| vc_conn.done; |
| f_shutdown_helper(); |
| } |
| |
| /* The BSC does *not* indicate BTS_FEAT_VAMOS; make sure that a channel activation to VAMOS mode is refused by osmo-bsc. |
| */ |
| testcase TC_refuse_chan_act_to_vamos() runs on test_CT { |
| f_init_vty(); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 1 sub-slot 0 activate-vamos fr"); |
| |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| timer T := 5.0; |
| |
| T.start; |
| alt { |
| [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(?, IPAC_PROTO_RSL_TRX0)) -> value rx_rsl_ud { |
| if (rx_rsl_ud.rsl.msg_type == RSL_MT_CHAN_ACTIV) { |
| T.stop; |
| setverdict(fail, "CHANnel ACTivate in VAMOS mode succeeded even though BTS does not support VAMOS"); |
| mtc.stop; |
| } |
| repeat; |
| } |
| [] T.timeout { |
| /* The BTS does not exhibit BTS_FEAT_VAMOS, so no VAMOS related CHANnel ACTivate should happen. */ |
| setverdict(pass); |
| } |
| } |
| } |
| |
| private function f_TC_reassignment_codec(charstring id) runs on MSC_ConnHdlr { |
| /* First fully set up a speech lchan */ |
| f_assignment_codec(id, do_perform_clear := false); |
| |
| /* Trigger re-assignment to another lchan */ |
| var AssignmentState assignment_st := valueof(ts_AssignmentStateInit); |
| |
| /* Re-Assignment should tell the MGW endpoint the new lchan's RTP address and port, so expecting to see exactly |
| * one MDCX on MGCP. */ |
| g_media.mgcp_conn[0].mdcx_seen_exp := g_media.mgcp_conn[0].mdcx_seen_exp + 1; |
| |
| /* The new lchan will see all-new IPAC_CRCX and IPAC_MDCX messages telling the BTS the same RTP address and port |
| * as the old lchan used. */ |
| g_media.bts.ipa_crcx_seen := false; |
| g_media.bts.ipa_mdcx_seen := false; |
| |
| /* Send different BTS side RTP port number for the new lchan */ |
| g_media.bts.bts.port_nr := 4223; |
| |
| f_rslem_register(0, valueof(ts_RslChanNr_Bm(2))); /* <-- FIXME: can we somehow infer the timeslot that will be used? */ |
| |
| /* Trigger re-assignment. */ |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot " & int2str(g_chan_nr.tn) & " sub-slot 0 assignment"); |
| |
| timer T := 5.0; |
| T.start; |
| alt { |
| [] as_assignment(assignment_st); |
| [] as_Media(); |
| [] T.timeout { |
| break; |
| } |
| } |
| |
| if (not assignment_st.assignment_done) { |
| setverdict(fail, "Assignment did not complete"); |
| mtc.stop; |
| } |
| |
| f_check_mgcp_expectations() |
| setverdict(pass); |
| |
| f_sleep(2.0); |
| log("show lchan summary: ", f_vty_transceive_ret(BSCVTY, "show lchan summary")); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| interleave { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE)) {} |
| [] RSL.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) {} |
| [] RSL.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)) { |
| RSL.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| f_rslem_unregister(0, g_chan_nr); |
| } |
| [] BSSAP.receive(tr_BSSMAP_ClearComplete) { |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| } |
| } |
| f_expect_dlcx_conns(); |
| |
| f_sleep(0.5); |
| } |
| |
| testcase TC_reassignment_fr() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_handover_init(); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| vc_conn := f_start_handler(refers(f_TC_reassignment_codec), pars); |
| vc_conn.done; |
| |
| /* from f_establish_fully() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| /* from re-assignment */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| f_shutdown_helper(); |
| } |
| |
| const charstring REEST_LOST_CONNECTION := "REEST_LOST_CONNECTION"; |
| const charstring REEST_CLEAR := "REEST_CLEAR"; |
| const charstring REEST_CLEAR_DONE := "REEST_CLEAR_DONE"; |
| |
| /* CM Re-Establishment, 3GPP TS 24.008 4.5.1.6. |
| * The MS <-> BTS loses radio connection, MS shows up on second BTS and asks for CM Re-Establishment. |
| * BSC should establish a separate A conn for the same MS, the original A conn is then cleared by |
| * the MSC as the CM Re-Establishment is handled. |
| * |
| * MS bts0 bts1 bsc msc test-component |
| * |<----->|<----------------->|<-0-->| _1 Establish channel on bts 0 |
| * | | _1 wait a bit, to settle down |
| * |<-x x--| | _1 "lose connection" |
| * | | REEST_LOST_CONNECTION |
| * |----------------->|------->|--1-->| _2 new A-conn: Chan Rqd, Imm Ass, Compl L3 with CM Re-Establishment Req |
| * | | REEST_CLEAR |
| * | |<-0---| _1 Clear Command on first A-conn |
| * | |--0-->| _1 Clear Complete |
| * | |<----------------->| | _1 Release first channel |
| * | | REEST_CLEAR_DONE |
| * |<-----------------|<-------|<-1---| _2 Chan Activ, Assignment Command |
| * |<-----------------|<-------|<-1---| _2 Clear Command, Release |
| * |
| */ |
| private function f_tc_cm_reestablishment_1(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| /* The original channel loses connection, MS attemts CM Re-Establishment on another cell, see |
| * f_tc_cm_reestablishment_2(). This established channel stays active until MSC sends a Clear Command. The time |
| * when exactly that happens is determined by f_tc_cm_reestablishment_2(). */ |
| f_sleep(2.0); |
| COORD.send(REEST_LOST_CONNECTION); |
| |
| alt { |
| [] COORD.receive(REEST_CLEAR); |
| [] RSL.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) { |
| setverdict(fail, "Unexpected channel release"); |
| mtc.stop; |
| } |
| [] RSL.receive(tr_RSL_RF_CHAN_REL(g_chan_nr)) { |
| setverdict(fail, "Unexpected channel release"); |
| mtc.stop; |
| } |
| } |
| f_perform_clear() |
| f_create_mgcp_delete_ep(g_media.mgcp_ep); |
| COORD.send(REEST_CLEAR_DONE); |
| } |
| |
| private function f_tc_cm_reestablishment_2(charstring id) runs on MSC_ConnHdlr { |
| f_MscConnHdlr_init(g_pars.media_nr, host_bts, host_mgw_mgcp, FR_AMR); |
| |
| /* The MS lost the connection on the first channel, now establishes another one */ |
| COORD.receive(REEST_LOST_CONNECTION); |
| |
| var MobileIdentityLV mi := valueof(ts_MI_IMSI_LV(g_pars.imsi)); |
| var PDU_ML3_MS_NW l3_info := valueof(ts_CM_REESTABL_REQ(mi)); |
| var octetstring l3_enc := enc_PDU_ML3_MS_NW(l3_info); |
| |
| f_create_bssmap_exp(l3_enc); |
| RSL_Emulation.f_chan_est(g_pars.ra, l3_enc, g_pars.link_id, g_pars.fn, rsl_pt := RSL1, rsl_proc_pt := RSL1_PROC); |
| BSSAP.receive(tr_BSSMAP_ComplL3(l3_enc)); |
| |
| /* MSC got the CM Re-Establishment request and first off clears the previous conn. */ |
| COORD.send(REEST_CLEAR); |
| COORD.receive(REEST_CLEAR_DONE); |
| |
| f_sleep(2.0); |
| |
| /* Answer the CM Re-Establishment with an Assignment Command. */ |
| var template PDU_BSSAP expect_assignment_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| var AssignmentState st := valueof(ts_AssignmentStateInit); |
| st.voice_call := true; |
| st.is_assignment := true; |
| |
| var ExpectCriteria mgcpcrit := { |
| connid := omit, |
| endpoint := omit, |
| transid := omit |
| }; |
| f_create_mgcp_expect(mgcpcrit); |
| |
| f_rslem_dchan_queue_enable(RSL1_PROC); |
| |
| BSSAP.send(ass_cmd); |
| |
| var PDU_BSSAP bssap; |
| |
| alt { |
| [] as_assignment(st, rsl_pt := RSL1, rsl_proc_pt := RSL1_PROC); |
| [] as_Media_ipacc(RSL1, RSL2); |
| [] as_Media_mgw(); |
| [st.assignment_done] BSSAP.receive(expect_assignment_compl) { |
| break; |
| } |
| } |
| |
| f_sleep(3.0); |
| |
| f_logp(BSCVTY, "f_tc_cm_reestablishment_2 clearing"); |
| f_perform_clear(RSL1, RSL1_PROC); |
| } |
| |
| testcase TC_cm_reestablishment() runs on test_CT { |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn1; |
| |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn2; |
| pars2.imsi := pars1.imsi; |
| pars2.media_nr := 2; |
| pars2.expect_tsc := c_BtsParams[1].tsc; |
| |
| f_init(2, true, guard_timeout := 40.0); |
| f_sleep(1.0); |
| |
| vc_conn1 := f_start_handler_create(pars1); |
| vc_conn2 := f_start_handler_create(pars2); |
| connect(vc_conn1:COORD, vc_conn2:COORD); |
| f_start_handler_run(vc_conn1, refers(f_tc_cm_reestablishment_1), pars1); |
| f_start_handler_run(vc_conn2, refers(f_tc_cm_reestablishment_2), pars2); |
| vc_conn1.done; |
| vc_conn2.done; |
| |
| f_shutdown_helper(); |
| } |
| |
| function f_exp_ipa_rx_nonfatal(template (present) RSL_Message t_rx, |
| boolean ignore_other_rx := true, |
| BtsTrxIdx idx := {0, 0}, |
| float Tval := 2.0) |
| runs on test_CT return template (omit) RSL_Message { |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| timer T := Tval; |
| |
| T.start; |
| alt { |
| [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(t_rx, ?)) -> value rx_rsl_ud { |
| T.stop; |
| } |
| [ignore_other_rx] IPA_RSL[idx.bts][idx.trx].receive { repeat; } |
| [not ignore_other_rx] IPA_RSL[idx.bts][idx.trx].receive { |
| log("f_exp_ipa_rx_nonfatal(): Got different message than ", t_rx); |
| T.stop; |
| return omit; |
| } |
| [] T.timeout { |
| return omit; |
| } |
| } |
| return rx_rsl_ud.rsl; |
| } |
| |
| private function f_vty_set_imm_ass(TELNETasp_PT pt, BtsNr bts_nr := 0, charstring imm_ass_setting := "post-chan-ack") { |
| f_vty_enter_cfg_bts(pt, bts_nr); |
| f_vty_transceive(pt, "immediate-assignment " & imm_ass_setting); |
| f_vty_transceive(pt, "exit"); |
| f_vty_transceive(pt, "exit"); |
| f_vty_transceive(pt, "exit"); |
| } |
| |
| private function f_verify_imm_ass(RSL_Message imm_ass, template uint8_t ra := ?, template GsmFrameNumber fn := ?, |
| template (present) RslChannelNr chan_nr := ?, |
| template (present) uint12_t arfcn := ?, |
| template (present) uint3_t tsc := ?) |
| { |
| var RSL_IE_Body full_imm_ass_info; |
| if (not f_rsl_find_ie(imm_ass, RSL_IE_FULL_IMM_ASS_INFO, full_imm_ass_info)) { |
| setverdict(fail, "RSL Full Immediate Assign Info IE is absent"); |
| mtc.stop; |
| } |
| |
| var GsmRrMessage rr_imm_ass := dec_GsmRrMessage(full_imm_ass_info.full_imm_ass_info.payload); |
| var template GsmRrMessage expect_imm_ass := tr_IMM_ASS(ra := ra, |
| fn := fn, |
| ch_desc := tr_ChanDescH0(chan_nr, arfcn, tsc), |
| page_mode := ?); |
| if (not match(rr_imm_ass, expect_imm_ass)) { |
| log("Error: expected ", expect_imm_ass, " got ", rr_imm_ass); |
| setverdict(fail, "Failed to match Immediate Assignment"); |
| mtc.stop; |
| } |
| } |
| |
| testcase TC_imm_ass_post_chan_ack() runs on test_CT { |
| var RSL_Message chan_act; |
| var RSL_Message imm_ass; |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| /* (should be the default anyway, just to make things clear) */ |
| f_vty_set_imm_ass(BSCVTY, 0, "post-chan-ack"); |
| |
| /* RA containing reason=LU */ |
| var GsmFrameNumber fn := 2342; |
| var uint8_t ra := 2; |
| f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); |
| |
| chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| |
| /* First send the Chan Act ACK */ |
| var RslChannelNr chan_nr := chan_act.ies[0].body.chan_nr; |
| var DchanTuple dt := {-, chan_nr, {0, 0}}; |
| var RSL_IE_Body chan_ident_ie; |
| if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { |
| setverdict(fail, "RSL Channel Identification IE is absent"); |
| mtc.stop; |
| } |
| |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn + 10)); |
| |
| /* Then expect the Immediate Assignment, after we ACKed the chan act */ |
| imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| |
| f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, |
| chan_ident_ie.chan_ident.ch_desc.v.tsc); |
| |
| /* Check that the lchan is working */ |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(rx_c_ind.connectionId)); |
| |
| f_sleep(1.0); |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_imm_ass_pre_chan_ack() runs on test_CT { |
| var RSL_Message chan_act; |
| var RSL_Message imm_ass; |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| f_vty_set_imm_ass(BSCVTY, 0, "pre-chan-ack"); |
| |
| /* RA containing reason=LU */ |
| var GsmFrameNumber fn := 2342; |
| var uint8_t ra := 2; |
| f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); |
| |
| chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| var RslChannelNr chan_nr := chan_act.ies[0].body.chan_nr; |
| var DchanTuple dt := {-, chan_nr, {0, 0}}; |
| var RSL_IE_Body chan_ident_ie; |
| if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { |
| setverdict(fail, "RSL Channel Identification IE is absent"); |
| mtc.stop; |
| } |
| |
| /* (set bts 0 cfg back to default) */ |
| f_vty_set_imm_ass(BSCVTY); |
| |
| /* *FIRST* expect the Immediate Assignment, before we ACK the chan act */ |
| imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, |
| chan_ident_ie.chan_ident.ch_desc.v.tsc); |
| |
| /* Only now send the Chan Act ACK */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); |
| |
| /* Check that the lchan is working */ |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(rx_c_ind.connectionId)); |
| |
| f_sleep(1.0); |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_imm_ass_pre_ts_ack() runs on test_CT { |
| var RSL_Message chan_act; |
| var RSL_Message imm_ass; |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| f_vty_set_imm_ass(BSCVTY, 0, "pre-ts-ack"); |
| |
| /* RA containing reason=LU */ |
| var GsmFrameNumber fn := 2342; |
| var uint8_t ra := 2; |
| f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); |
| |
| chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| var RslChannelNr chan_nr := chan_act.ies[0].body.chan_nr; |
| var DchanTuple dt := {-, chan_nr, {0, 0}}; |
| var RSL_IE_Body chan_ident_ie; |
| if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { |
| setverdict(fail, "RSL Channel Identification IE is absent"); |
| mtc.stop; |
| } |
| |
| /* (set bts 0 cfg back to default) */ |
| f_vty_set_imm_ass(BSCVTY); |
| |
| /* *FIRST* expect the Immediate Assignment, before we ACK the chan act */ |
| imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, |
| chan_ident_ie.chan_ident.ch_desc.v.tsc); |
| |
| /* Only now send the Chan Act ACK */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); |
| |
| /* Check that the lchan is working */ |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(rx_c_ind.connectionId)); |
| |
| f_sleep(1.0); |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_imm_ass_pre_chan_ack_dyn_ts() runs on test_CT { |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_TCH/H_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2323)); |
| |
| /* clean up timeslot 6 config, will only take effect when the OML drops the next time */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| /* block all static timeslots so that the dyn TS will be used */ |
| f_disable_all_tch_f(); |
| f_disable_all_tch_h(); |
| f_disable_all_sdcch(); |
| |
| var RSL_Message chan_act; |
| var RSL_Message imm_ass; |
| |
| f_vty_set_imm_ass(BSCVTY, 0, "pre-chan-ack"); |
| |
| /* RA containing reason=LU */ |
| var GsmFrameNumber fn := 2342; |
| var uint8_t ra := 2; |
| f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); |
| |
| /* Expect the dyn TS to deactivate PDCH first */ |
| f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(chan_nr)); |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(chan_nr)); |
| |
| /* Now activation as SDCCH8 */ |
| chan_nr := valueof(t_RslChanNr_SDCCH8(tn := 6, sub_slot := 0)); |
| var DchanTuple dt := {-, chan_nr, {0, 0}}; |
| |
| chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| var RSL_IE_Body chan_ident_ie; |
| if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { |
| setverdict(fail, "RSL Channel Identification IE is absent"); |
| mtc.stop; |
| } |
| |
| /* *FIRST* expect the Immediate Assignment, before we ACK the chan act */ |
| imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, |
| chan_ident_ie.chan_ident.ch_desc.v.tsc); |
| |
| /* Only now send the Chan Act ACK */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); |
| |
| /* Check that the lchan is working */ |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(rx_c_ind.connectionId)); |
| |
| /* (set bts 0 cfg back to default) */ |
| f_vty_set_imm_ass(BSCVTY); |
| |
| f_sleep(1.0); |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_imm_ass_pre_ts_ack_dyn_ts() runs on test_CT { |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_TCH/H_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2323)); |
| |
| /* clean up timeslot 6 config, will only take effect when the OML drops the next time */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| /* block all static timeslots so that the dyn TS will be used */ |
| f_disable_all_tch_f(); |
| f_disable_all_tch_h(); |
| f_disable_all_sdcch(); |
| |
| var RSL_Message chan_act; |
| var RSL_Message imm_ass; |
| |
| f_vty_set_imm_ass(BSCVTY, 0, "pre-ts-ack"); |
| |
| /* RA containing reason=LU */ |
| var GsmFrameNumber fn := 2342; |
| var uint8_t ra := 2; |
| f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); |
| |
| /* Expect the dyn TS to deactivate PDCH first */ |
| f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(chan_nr)); |
| |
| /* And already the Immediate Assignment even before the PDCH Deact ACK */ |
| imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); |
| |
| /* continue the Osmo style PDCH Deact (usual chan rel) */ |
| f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(chan_nr)); |
| |
| /* Now activation as SDCCH8 */ |
| chan_nr := valueof(t_RslChanNr_SDCCH8(tn := 6, sub_slot := 0)); |
| var DchanTuple dt := {-, chan_nr, {0, 0}}; |
| |
| chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| var RSL_IE_Body chan_ident_ie; |
| if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { |
| setverdict(fail, "RSL Channel Identification IE is absent"); |
| mtc.stop; |
| } |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); |
| |
| f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, |
| chan_ident_ie.chan_ident.ch_desc.v.tsc); |
| |
| /* Check that the lchan is working */ |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(rx_c_ind.connectionId)); |
| |
| /* (set bts 0 cfg back to default) */ |
| f_vty_set_imm_ass(BSCVTY); |
| |
| f_sleep(1.0); |
| f_perform_clear_test_ct(dt); |
| f_shutdown_helper(); |
| } |
| |
| /* GET and SET the bts.N.trx.M.rf_locked CTRL variable */ |
| testcase TC_ctrl_trx_rf_locked() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(nr_bts := 2, handler_mode := true, nr_msc := 1); |
| f_sleep(1.0); |
| |
| /* BTS 0, 1, 2 are OML unlocked, only BTS 0, 1 are actually connected to RSL. */ |
| f_ctrl_get_exp(IPA_CTRL, "rf_states", |
| "0,0,operational,unlocked,on,rsl-up;" & |
| "1,0,operational,unlocked,on,rsl-up;" & |
| "2,0,operational,unlocked,on,rsl-down;" & |
| "2,1,operational,unlocked,on,rsl-down;" & |
| "2,2,operational,unlocked,on,rsl-down;" & |
| "2,3,operational,unlocked,on,rsl-down;" & |
| "3,0,inoperational,locked,on,rsl-down;"); |
| |
| f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: lock BTS 1 TRX 0"); |
| f_ctrl_set(IPA_CTRL, "bts.1.trx.0.rf_locked", "1"); |
| /* give it a moment to settle the FSM status */ |
| f_sleep(1.0); |
| |
| /* Now BTS 1 TRX 0 should reflect "locked". Note the RF policy stays "on", because this is still handled |
| * globally in osmo-bsc. Probably after sending "rf_locked 1" for a TRX, that TRX should reflect an RF policy |
| * of "off"? But that's for a future patch if at all. */ |
| f_ctrl_get_exp(IPA_CTRL, "rf_states", |
| "0,0,operational,unlocked,on,rsl-up;" & |
| "1,0,operational,locked,on,rsl-up;" & |
| "2,0,operational,unlocked,on,rsl-down;" & |
| "2,1,operational,unlocked,on,rsl-down;" & |
| "2,2,operational,unlocked,on,rsl-down;" & |
| "2,3,operational,unlocked,on,rsl-down;" & |
| "3,0,inoperational,locked,on,rsl-down;"); |
| |
| f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: lock the already locked TRX, nothing should change"); |
| f_ctrl_set(IPA_CTRL, "bts.1.trx.0.rf_locked", "1"); |
| f_sleep(1.0); |
| f_ctrl_get_exp(IPA_CTRL, "rf_states", |
| "0,0,operational,unlocked,on,rsl-up;" & |
| "1,0,operational,locked,on,rsl-up;" & |
| "2,0,operational,unlocked,on,rsl-down;" & |
| "2,1,operational,unlocked,on,rsl-down;" & |
| "2,2,operational,unlocked,on,rsl-down;" & |
| "2,3,operational,unlocked,on,rsl-down;" & |
| "3,0,inoperational,locked,on,rsl-down;"); |
| |
| f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: unlock BTS 1 TRX 0"); |
| f_ctrl_set(IPA_CTRL, "bts.1.trx.0.rf_locked", "0"); |
| f_sleep(1.0); |
| f_ctrl_get_exp(IPA_CTRL, "rf_states", |
| "0,0,operational,unlocked,on,rsl-up;" & |
| "1,0,operational,unlocked,on,rsl-up;" & |
| "2,0,operational,unlocked,on,rsl-down;" & |
| "2,1,operational,unlocked,on,rsl-down;" & |
| "2,2,operational,unlocked,on,rsl-down;" & |
| "2,3,operational,unlocked,on,rsl-down;" & |
| "3,0,inoperational,locked,on,rsl-down;"); |
| |
| f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: unlock an already unlocked TRX, nothing should change"); |
| f_ctrl_set(IPA_CTRL, "bts.0.trx.0.rf_locked", "0"); |
| f_sleep(1.0); |
| f_ctrl_get_exp(IPA_CTRL, "rf_states", |
| "0,0,operational,unlocked,on,rsl-up;" & |
| "1,0,operational,unlocked,on,rsl-up;" & |
| "2,0,operational,unlocked,on,rsl-down;" & |
| "2,1,operational,unlocked,on,rsl-down;" & |
| "2,2,operational,unlocked,on,rsl-down;" & |
| "2,3,operational,unlocked,on,rsl-down;" & |
| "3,0,inoperational,locked,on,rsl-down;"); |
| |
| f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: unlock an inoperational TRX"); |
| f_ctrl_set(IPA_CTRL, "bts.3.trx.0.rf_locked", "0"); |
| f_sleep(1.0); |
| f_ctrl_get_exp(IPA_CTRL, "rf_states", |
| "0,0,operational,unlocked,on,rsl-up;" & |
| "1,0,operational,unlocked,on,rsl-up;" & |
| "2,0,operational,unlocked,on,rsl-down;" & |
| "2,1,operational,unlocked,on,rsl-down;" & |
| "2,2,operational,unlocked,on,rsl-down;" & |
| "2,3,operational,unlocked,on,rsl-down;" & |
| "3,0,inoperational,locked,on,rsl-down;"); |
| |
| f_shutdown_helper(); |
| } |
| |
| const CounterNameVals counternames_cm_serv_rej := { |
| { "cm_serv_rej", 0 }, |
| { "cm_serv_rej:imsi_unknown_in_hlr", 0 }, |
| { "cm_serv_rej:illegal_ms", 0 }, |
| { "cm_serv_rej:imsi_unknown_in_vlr", 0 }, |
| { "cm_serv_rej:imei_not_accepted", 0 }, |
| { "cm_serv_rej:illegal_me", 0 }, |
| { "cm_serv_rej:plmn_not_allowed", 0 }, |
| { "cm_serv_rej:loc_not_allowed", 0 }, |
| { "cm_serv_rej:roaming_not_allowed", 0 }, |
| { "cm_serv_rej:network_failure", 0 }, |
| { "cm_serv_rej:synch_failure", 0 }, |
| { "cm_serv_rej:congestion", 0 }, |
| { "cm_serv_rej:srv_opt_not_supported", 0 }, |
| { "cm_serv_rej:rqd_srv_opt_not_supported", 0 }, |
| { "cm_serv_rej:srv_opt_tmp_out_of_order", 0 }, |
| { "cm_serv_rej:call_can_not_be_identified", 0 }, |
| { "cm_serv_rej:incorrect_message", 0 }, |
| { "cm_serv_rej:invalid_mandantory_inf", 0 }, |
| { "cm_serv_rej:msg_type_not_implemented", 0 }, |
| { "cm_serv_rej:msg_type_not_compatible", 0 }, |
| { "cm_serv_rej:inf_eleme_not_implemented", 0 }, |
| { "cm_serv_rej:condtional_ie_error", 0 }, |
| { "cm_serv_rej:msg_not_compatible", 0 }, |
| { "cm_serv_rej:protocol_error", 0 }, |
| { "cm_serv_rej:retry_in_new_cell", 0 } |
| }; |
| |
| private function f_TC_cm_serv_rej(charstring id) runs on MSC_ConnHdlr |
| { |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| BSSAP.send(ts_PDU_DTAP_MT(ts_CM_SERV_REJ('02'O), '00'O)); |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_CM_SERV_REJ)); |
| f_perform_clear(); |
| f_sleep(1.0); |
| } |
| testcase TC_cm_serv_rej() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bts_init(1, counternames_cm_serv_rej); |
| |
| vc_conn := f_start_handler(refers(f_TC_cm_serv_rej), pars); |
| vc_conn.done; |
| |
| f_ctrs_bts_add(0, "cm_serv_rej", 1); |
| f_ctrs_bts_add(0, "cm_serv_rej:imsi_unknown_in_hlr", 1); |
| f_ctrs_bts_verify(); |
| |
| f_sleep(1.0); |
| f_shutdown_helper(); |
| } |
| |
| /* Reproduce a segfault happening when the SDCCH (primary) lchan is lost in-between a TCH Channel Activ and its Channel |
| * Activ Ack (SYS#5627). */ |
| private function f_TC_lost_sdcch_during_assignment(charstring id) runs on MSC_ConnHdlr { |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| var BSSMAP_FIELD_CodecType codecType; |
| codecType := valueof(ass_cmd.pdu.bssmap.assignmentRequest.codecList.codecElements[0].codecType); |
| |
| f_MscConnHdlr_init(g_pars.media_nr, host_bts, host_mgw_mgcp, codecType); |
| |
| /* First establish a signalling lchan */ |
| f_create_chan_and_exp(); |
| f_rslem_dchan_queue_enable(); |
| |
| /* we should now have a COMPL_L3 at the MSC */ |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| activate(as_Media_mgw(fail_on_dlcx := false)); |
| |
| var RslChannelNr chan_nr := { u := { ch0 := RSL_CHAN_NR_Bm_ACCH }, tn := 1 }; |
| f_rslem_register(0, chan_nr); |
| |
| f_rslem_set_auto_chan_act_ack(RSL_PROC, false); |
| BSSAP.send(ass_cmd); |
| |
| |
| /* Wait for the Channel Activ for the TCH channel */ |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| RSL.receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV), sid := ?)) -> value rx_rsl_ud; |
| |
| /* make the original SDCCH disappear */ |
| RSL.send(ts_RSL_REL_IND(g_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); |
| |
| /* and ACK the TCH channel activation. This caused a segfault up to OsmoBSC 1.7.0 (SYS#5627) */ |
| RSL.send(ts_ASP_RSL_UD(ts_RSL_CHAN_ACT_ACK(chan_nr, 23), rx_rsl_ud.streamId)); |
| |
| interleave { |
| [] BSSAP.receive(tr_BSSMAP_AssignmentFail); |
| [] BSSAP.receive(tr_BSSMAP_ClearRequest); |
| } |
| |
| BSSAP.send(ts_BSSMAP_ClearCommand(0)); |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| |
| var MgcpCommand mgcp; |
| var MGCP_RecvFrom mrf; |
| var template MgcpMessage msg_dlcx := { command := tr_DLCX }; |
| alt { |
| [g_pars.aoip] MGCP.receive(tr_DLCX) -> value mgcp { |
| MGCP.send(ts_DLCX_ACK2(mgcp.line.trans_id)); |
| } |
| [not g_pars.aoip] MGCP_MULTI.receive(tr_MGCP_RecvFrom_any(msg_dlcx)) -> value mrf { |
| MGCP_MULTI.send(t_MGCP_SendToMrf(mrf, MgcpMessage:{ |
| response := ts_DLCX_ACK2(mrf.msg.command.line.trans_id) |
| })); |
| } |
| } |
| |
| f_sleep(0.5); |
| } |
| testcase TC_lost_sdcch_during_assignment() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_lost_sdcch_during_assignment), pars); |
| vc_conn.done; |
| |
| f_shutdown_helper(); |
| } |
| |
| const CounterNameVals counternames_bsc_bts_all_available_allocated := { |
| { "all_allocated:sdcch", 0 }, |
| { "all_allocated:static_sdcch", 0 }, |
| { "all_allocated:tch", 0 }, |
| { "all_allocated:static_tch", 0 } |
| } |
| |
| private function f_all_allocated_expect_counter_change(charstring_list expect_changed) runs on test_CT |
| { |
| /* Make sure counters settle first */ |
| f_sleep(1.0); |
| |
| /* Take a baseline of counters */ |
| f_ctrs_bsc_and_bts_init(1, counternames_bsc_bts_all_available_allocated); |
| |
| /* Elapse some time so that we see changes in counters, hopefully where expected */ |
| f_sleep(2.0); |
| |
| /* Get new counters */ |
| var charstring_list all_changed := {}; |
| all_changed := all_changed & f_counter_name_vals_get_changed_n(IPA_CTRL, "bsc", g_ctr_bsc); |
| all_changed := all_changed & f_counter_name_vals_get_changed_n(IPA_CTRL, "bts", g_ctr_bts); |
| |
| /* Compare with expectations */ |
| var charstring_list all_expect_changed := {}; |
| for (var integer i := 0; i < lengthof(expect_changed); i := i + 1) { |
| all_expect_changed := all_expect_changed & { "bsc.0." & expect_changed[i], "bts.0." & expect_changed[i] }; |
| } |
| f_counter_name_vals_expect_changed_list(all_changed, all_expect_changed); |
| } |
| |
| testcase TC_ratectr_all_available_allocated() runs on test_CT { |
| var ASP_RSL_Unitdata rsl_ud; |
| var integer i; |
| var integer chreq_total, chreq_nochan; |
| |
| f_init(1, guard_timeout := 60.0); |
| f_sleep(1.0); |
| |
| /* Exhaust all dedicated SDCCH lchans. |
| /* GSM 44.018 Table 9.1.8.2: |
| * RA = '13'O -> Establishment cause = 0001xxxx (MS dual rate capable and asks for "SDCCH"). |
| */ |
| var DchanTuples chan_cleanup := {}; |
| for (i := 0; i < NUM_SDCCH_PER_BTS; i := i+1) { |
| chan_cleanup := chan_cleanup & { f_est_dchan('13'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| } |
| |
| /* Since only bts 0 is connected, expecting all_allocated to become true for both bts 0 and the "global" bsc |
| * level. |
| * All SDCCH are now occupied. */ |
| f_all_allocated_expect_counter_change({"all_allocated:sdcch", "all_allocated:static_sdcch"}); |
| |
| /* Also fill up all remaining (TCH) channels */ |
| for (i := 0; i < NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS; i := i+1) { |
| chan_cleanup := chan_cleanup & { f_est_dchan('33'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| } |
| |
| /* All TCH are now also occupied */ |
| f_all_allocated_expect_counter_change({"all_allocated:sdcch", "all_allocated:static_sdcch", |
| "all_allocated:tch", "all_allocated:static_tch"}); |
| |
| /* Clean up SDCCH lchans */ |
| for (i := 0; i < lengthof(chan_cleanup); i := i + 1) { |
| f_perform_clear_test_ct(chan_cleanup[i]); |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_ratectr_all_available_allocated_dyn() runs on test_CT { |
| var ASP_RSL_Unitdata rsl_ud; |
| var integer i; |
| var integer chreq_total, chreq_nochan; |
| |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 2, "TCH/F_TCH/H_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| /* Now we have 3 TCH/F, 1 OSMO_DYN, 1 TCH/H */ |
| |
| f_init(1, guard_timeout := 60.0); |
| f_sleep(1.0); |
| |
| /* The dyn TS wants to activate PDCH mode, ACK that. */ |
| var RslChannelNr chan_nr; |
| chan_nr := valueof(t_RslChanNr_PDCH(2)); |
| f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); |
| |
| /* Exhaust all dedicated SDCCH lchans. |
| /* GSM 44.018 Table 9.1.8.2: |
| * RA = '13'O -> Establishment cause = 0001xxxx (MS dual rate capable and asks for "SDCCH"). |
| */ |
| var DchanTuples chan_cleanup := {}; |
| for (i := 0; i < NUM_SDCCH_PER_BTS; i := i+1) { |
| chan_cleanup := chan_cleanup & { f_est_dchan('13'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| } |
| |
| /* The static SDCCH should now be occupied, while still 3x8 dynamic SDCCH potentially remain. So only |
| * all_allocated:static_sdcch is counted, all_allocated:sdcch remains zero. */ |
| f_all_allocated_expect_counter_change({"all_allocated:static_sdcch"}); |
| |
| /* Request more SDCCH, hence convert the first dyn TS to SDCCH8. |
| * Will release them later, so remember all the DchanTuples. */ |
| var DchanTuples dyn_sddch := {}; |
| dyn_sddch := dyn_sddch & { f_est_dchan_dyn('33'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| |
| /* Also occupy the seven other SDCCH of the dyn TS */ |
| for (i := 0; i < 7; i := i+1) { |
| dyn_sddch := dyn_sddch & { f_est_dchan('33'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| } |
| |
| /* Now all dynamic SDCCH are also occupied, so for the first time all_allocated:sdcch will trigger... */ |
| f_all_allocated_expect_counter_change({"all_allocated:sdcch", "all_allocated:static_sdcch"}); |
| |
| /* occupy the remaining TCH, three TCH/F and two TCH/H lchans */ |
| for (i := 0; i < 5; i := i+1) { |
| chan_cleanup := chan_cleanup & { f_est_dchan('33'O, NUM_SDCCH_PER_BTS + i, '00010203040506'O) }; |
| } |
| |
| /* All TCH lchans are now also occupied, both static and dynamic */ |
| f_all_allocated_expect_counter_change({"all_allocated:sdcch", "all_allocated:static_sdcch", |
| "all_allocated:tch", "all_allocated:static_tch"}); |
| |
| /* Starting to release the dyn TS: as soon as the first SDCCH gets released, all_allocated:sdcch stops |
| * incrementing. */ |
| var BssmapCause cause := 0; |
| var DchanTuple dt := dyn_sddch[0]; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| f_exp_chan_rel_and_clear(dt); |
| |
| /* one dyn TS SDCCH is free again, so only the static_sdcch should increment. For tch, both static and dynamic |
| * count as occupied, so those still both increment. */ |
| f_all_allocated_expect_counter_change({"all_allocated:static_sdcch", |
| "all_allocated:tch", "all_allocated:static_tch"}); |
| |
| /* Release the remaining SDCCH of the dyn TS, so it becomes available as TCH again */ |
| for (i := 1; i < lengthof(dyn_sddch); i := i+1) { |
| dt := dyn_sddch[i]; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| f_exp_chan_rel_and_clear(dt); |
| } |
| |
| /* All SDCCH on the dyn TS are released, the dyn TS wants to activate PDCH again */ |
| chan_nr := valueof(t_RslChanNr_PDCH(2)); |
| f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); |
| f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); |
| |
| /* Now all channels are occupied except the dyn TS, so expecting only the static counters to increment */ |
| f_all_allocated_expect_counter_change({"all_allocated:static_sdcch", "all_allocated:static_tch"}); |
| |
| /* Clean up SDCCH lchans */ |
| for (i := 0; i < lengthof(chan_cleanup); i := i + 1) { |
| f_perform_clear_test_ct(chan_cleanup[i]); |
| } |
| |
| /* clean up config */ |
| f_ts_reset_chcomb(0); |
| |
| f_shutdown_helper(); |
| } |
| |
| private function f_TC_chan_alloc_algo(DchanTuple dt, BtsTrxIdx idx) |
| runs on test_CT { |
| /* MSC sends an Assignment Request */ |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ass_cmd)); |
| |
| /* Expect the BSC to allocate a TCH channel on the given BTS/TRX */ |
| var RSL_Message rsl_chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV), idx); |
| /* Send CHAN ACT NACK, so that the requested TCH channel becomes BORKEN */ |
| f_ipa_tx(ts_RSL_CHAN_ACT_NACK(rsl_chan_act.ies[0].body.chan_nr, RSL_ERR_EQUIPMENT_FAIL), idx); |
| /* Expect to receive an Assignment Failure */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentFail)); |
| } |
| |
| testcase TC_chan_alloc_algo_ascending() runs on test_CT { |
| /* We need to access BTS2, which has 4 TRXs */ |
| f_init(nr_bts := 3); |
| |
| /* HACK: work around "Couldn't find Expect for CRCX" */ |
| vc_MGCP[0].stop; |
| |
| f_vty_enter_cfg_bts(BSCVTY, 2); |
| f_vty_transceive(BSCVTY, "channel allocator ascending"); |
| f_vty_transceive(BSCVTY, "end"); |
| |
| /* Expect the BSC to allocate 4 x TCH/F channels on BTS2/TRX0 */ |
| for (var integer i := 0; i < 4; i := i + 1) { |
| var DchanTuple dt := f_est_dchan('23'O, 23, '00000000'O, {2, 0}); |
| f_TC_chan_alloc_algo(dt, {2, 0}); |
| f_perform_clear_test_ct(dt); |
| } |
| |
| /* At this point all 4 x TCH/F channels are BORKEN, but they will be |
| * resurrected upon the A-bis/OML link re-establishment. */ |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_chan_alloc_algo_descending() runs on test_CT { |
| /* We need to access BTS2, which has 4 TRXs */ |
| f_init(nr_bts := 3); |
| |
| /* HACK: work around "Couldn't find Expect for CRCX" */ |
| vc_MGCP[0].stop; |
| |
| f_vty_enter_cfg_bts(BSCVTY, 2); |
| f_vty_transceive(BSCVTY, "channel allocator descending"); |
| f_vty_transceive(BSCVTY, "end"); |
| |
| /* Expect the BSC to allocate 5 x TCH/F channels on BTS2/TRX3 */ |
| for (var integer i := 0; i < 5; i := i + 1) { |
| var DchanTuple dt := f_est_dchan('23'O, 23, '00000000'O, {2, 0}); |
| f_TC_chan_alloc_algo(dt, {2, 3}); |
| f_perform_clear_test_ct(dt); |
| } |
| |
| /* At this point all 5 x TCH/F channels are BORKEN, but they will be |
| * resurrected upon the A-bis/OML link re-establishment. */ |
| f_shutdown_helper(); |
| } |
| |
| testcase TC_chan_alloc_algo_ass_dynamic() runs on test_CT { |
| const BtsTrxIdx TRX0 := {2, 0}; |
| const BtsTrxIdx TRX3 := {2, 3}; |
| |
| /* We need to access BTS2, which has 4 TRXs */ |
| f_init(nr_bts := 3); |
| |
| /* HACK: work around "Couldn't find Expect for CRCX" */ |
| vc_MGCP[0].stop; |
| |
| f_vty_enter_cfg_bts(BSCVTY, 2); |
| f_vty_transceive(BSCVTY, "channel allocator mode assignment dynamic"); |
| f_vty_transceive(BSCVTY, "channel allocator dynamic-param ul-rxlev thresh 50 avg-num 2"); |
| f_vty_transceive(BSCVTY, "channel allocator dynamic-param c0-chan-load thresh 0"); |
| f_vty_transceive(BSCVTY, "end"); |
| |
| var DchanTuple dt; |
| |
| f_logp(BSCVTY, "Case a) Unknown Uplink RxLev, fall-back to ascending"); |
| dt := f_est_dchan('23'O, 23, '00000000'O, TRX0); |
| f_TC_chan_alloc_algo(dt, TRX0); |
| f_perform_clear_test_ct(dt); |
| |
| f_logp(BSCVTY, "Case b) Not enough RxLev samples, use ascending"); |
| dt := f_est_dchan('23'O, 23, '00000000'O, TRX0); |
| f_ipa_tx(ts_RSL_MEAS_RES_EMPTY(dt.rsl_chan_nr, 0, |
| ts_RSL_IE_UplinkMeas(30, 0), |
| ts_RSL_IE_BS_Power(0)), TRX0); |
| f_sleep(0.3); /* give the IUT some time to process sent MRs */ |
| f_TC_chan_alloc_algo(dt, TRX0); |
| f_perform_clear_test_ct(dt); |
| |
| f_logp(BSCVTY, "Case c) Uplink RxLev below the threshold, use ascending"); |
| dt := f_est_dchan('23'O, 23, '00000000'O, TRX0); |
| f_ipa_tx(ts_RSL_MEAS_RES_EMPTY(dt.rsl_chan_nr, 0, |
| ts_RSL_IE_UplinkMeas(45, 0), |
| ts_RSL_IE_BS_Power(0)), TRX0); |
| f_ipa_tx(ts_RSL_MEAS_RES_EMPTY(dt.rsl_chan_nr, 1, |
| ts_RSL_IE_UplinkMeas(48, 0), |
| ts_RSL_IE_BS_Power(0)), TRX0); |
| f_sleep(0.3); /* give the IUT some time to process sent MRs */ |
| f_TC_chan_alloc_algo(dt, TRX0); |
| f_perform_clear_test_ct(dt); |
| |
| f_logp(BSCVTY, "Case d) Uplink RxLev above the threshold, use descending"); |
| dt := f_est_dchan('23'O, 23, '00000000'O, TRX0); |
| f_ipa_tx(ts_RSL_MEAS_RES_EMPTY(dt.rsl_chan_nr, 0, |
| ts_RSL_IE_UplinkMeas(50, 0), |
| ts_RSL_IE_BS_Power(0)), TRX0); |
| f_ipa_tx(ts_RSL_MEAS_RES_EMPTY(dt.rsl_chan_nr, 1, |
| ts_RSL_IE_UplinkMeas(58, 0), |
| ts_RSL_IE_BS_Power(0)), TRX0); |
| f_sleep(0.3); /* give the IUT some time to process sent MRs */ |
| f_TC_chan_alloc_algo(dt, TRX3); |
| f_perform_clear_test_ct(dt); |
| |
| f_vty_enter_cfg_bts(BSCVTY, 2); |
| f_vty_transceive(BSCVTY, "channel allocator dynamic-param c0-chan-load thresh 90"); |
| f_vty_transceive(BSCVTY, "end"); |
| |
| f_logp(BSCVTY, "Case e) Uplink RxLev above the threshold, but C0 load is not"); |
| dt := f_est_dchan('23'O, 23, '00000000'O, TRX0); |
| f_ipa_tx(ts_RSL_MEAS_RES_EMPTY(dt.rsl_chan_nr, 0, |
| ts_RSL_IE_UplinkMeas(50, 0), |
| ts_RSL_IE_BS_Power(0)), TRX0); |
| f_ipa_tx(ts_RSL_MEAS_RES_EMPTY(dt.rsl_chan_nr, 1, |
| ts_RSL_IE_UplinkMeas(58, 0), |
| ts_RSL_IE_BS_Power(0)), TRX0); |
| f_sleep(0.3); /* give the IUT some time to process sent MRs */ |
| f_TC_chan_alloc_algo(dt, TRX0); |
| f_perform_clear_test_ct(dt); |
| |
| f_vty_enter_cfg_bts(BSCVTY, 2); |
| f_vty_transceive(BSCVTY, "channel allocator ascending"); |
| f_vty_transceive(BSCVTY, "end"); |
| |
| /* At this point some TCH/F channels are BORKEN, but they will be |
| * resurrected upon the A-bis/OML link re-establishment. */ |
| f_shutdown_helper(); |
| } |
| |
| control { |
| /* CTRL interface testing */ |
| execute( TC_ctrl_msc_connection_status() ); |
| execute( TC_ctrl_msc0_connection_status() ); |
| /* In SCCPlite tests, only one MSC is configured. These tests assume that three MSCs are configured, so only run |
| * these in the AoIP test suite. */ |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_stat_num_msc_connected_1() ); |
| execute( TC_stat_num_msc_connected_2() ); |
| execute( TC_stat_num_msc_connected_3() ); |
| } |
| execute( TC_stat_num_bts_connected_1() ); |
| execute( TC_stat_num_bts_connected_2() ); |
| execute( TC_stat_num_bts_connected_3() ); |
| execute( TC_ctrl() ); |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_SCCPlite_SERVER) { |
| execute( TC_ctrl_location() ); |
| } |
| |
| execute( TC_si_default() ); |
| execute( TC_si2quater_2_earfcns() ); |
| execute( TC_si2quater_3_earfcns() ); |
| execute( TC_si2quater_4_earfcns() ); |
| execute( TC_si2quater_5_earfcns() ); |
| execute( TC_si2quater_6_earfcns() ); |
| execute( TC_si2quater_12_earfcns() ); |
| execute( TC_si2quater_23_earfcns() ); |
| execute( TC_si2quater_32_earfcns() ); |
| execute( TC_si2quater_33_earfcns() ); |
| execute( TC_si2quater_42_earfcns() ); |
| execute( TC_si2quater_48_earfcns() ); |
| execute( TC_si2quater_49_earfcns() ); |
| execute( TC_si_acc_rotate() ); |
| execute( TC_si_acc_ramp_rotate() ); |
| |
| /* RSL DCHAN Channel ACtivation / Deactivation */ |
| execute( TC_chan_act_noreply() ); |
| execute( TC_chan_act_counter() ); |
| execute( TC_chan_act_ack_noest() ); |
| execute( TC_chan_act_ack_noest_emerg() ); |
| execute( TC_chan_rqd_emerg_deny() ); |
| execute( TC_chan_act_ack_est_ind_noreply() ); |
| execute( TC_chan_act_ack_est_ind_refused() ); |
| execute( TC_chan_act_nack() ); |
| execute( TC_chan_exhaustion() ); |
| execute( TC_chan_deact_silence() ); |
| execute( TC_chan_rel_rll_rel_ind() ); |
| execute( TC_chan_rel_conn_fail() ); |
| execute( TC_chan_rel_hard_clear() ); |
| execute( TC_chan_rel_last_eutran_plmn_hard_clear_no_csfb() ); |
| execute( TC_chan_rel_last_eutran_plmn_hard_clear_csfb() ); |
| execute( TC_chan_rel_hard_clear_csfb() ); |
| execute( TC_chan_rel_hard_rlsd() ); |
| execute( TC_chan_rel_hard_rlsd_ms_dead() ); |
| execute( TC_chan_rel_a_reset() ); |
| execute( TC_chan_rel_sccp_tiar_timeout() ); |
| execute( TC_chan_rel_rr_cause() ); |
| |
| execute( TC_outbound_connect() ); |
| |
| /* Assignment related */ |
| execute( TC_assignment_cic_only() ); |
| execute( TC_assignment_csd() ); |
| execute( TC_assignment_ctm() ); |
| execute( TC_assignment_sign() ); |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_assignment_aoip_tla_v6() ); |
| } |
| execute( TC_assignment_fr_a5_0() ); |
| execute( TC_assignment_fr_a5_1() ); |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_assignment_fr_a5_1_codec_missing() ); |
| } |
| execute( TC_assignment_fr_a5_3() ); |
| execute( TC_assignment_fr_a5_4() ); |
| execute( TC_assignment_fr_a5_4_fail() ); |
| execute( TC_assignment_fr_a5_not_sup() ); |
| execute( TC_ciph_mode_a5_0() ); |
| execute( TC_ciph_mode_a5_1() ); |
| execute( TC_ciph_mode_a5_2_0() ); |
| execute( TC_ciph_mode_a5_2_1() ); |
| execute( TC_ciph_mode_a5_3() ); |
| execute( TC_ciph_mode_a5_4() ); |
| |
| execute( TC_assignment_codec_fr() ); |
| execute( TC_assignment_codec_fr_by_mode_modify() ); |
| execute( TC_assignment_codec_hr() ); |
| execute( TC_assignment_codec_efr() ); |
| execute( TC_assignment_codec_amr_f() ); |
| execute( TC_assignment_codec_amr_h() ); |
| |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_assignment_codec_amr_f_S1() ); |
| execute( TC_assignment_codec_amr_h_S1() ); |
| execute( TC_assignment_codec_amr_f_S124() ); |
| execute( TC_assignment_codec_amr_h_S124() ); |
| execute( TC_assignment_codec_amr_f_S0() ); |
| execute( TC_assignment_codec_amr_f_S02() ); |
| execute( TC_assignment_codec_amr_f_S024() ); |
| execute( TC_assignment_codec_amr_f_S0247() ); |
| execute( TC_assignment_codec_amr_h_S0() ); |
| execute( TC_assignment_codec_amr_h_S02() ); |
| execute( TC_assignment_codec_amr_h_S024() ); |
| execute( TC_assignment_codec_amr_h_S0247() ); |
| execute( TC_assignment_codec_amr_f_S01234567() ); |
| execute( TC_assignment_codec_amr_f_S0234567() ); |
| execute( TC_assignment_codec_amr_f_zero() ); |
| execute( TC_assignment_codec_amr_f_unsupp() ); |
| execute( TC_assignment_codec_amr_h_S7() ); |
| execute( TC_assignment_codec_amr_f_start_mode_auto() ); |
| execute( TC_assignment_codec_amr_h_start_mode_auto() ); |
| execute( TC_assignment_codec_amr_f_start_mode_4() ); |
| execute( TC_assignment_codec_amr_h_start_mode_4() ); |
| execute( TC_assignment_codec_amr_startmode_cruft() ); |
| } |
| |
| execute( TC_assignment_codec_fr_exhausted_req_hr() ); |
| execute( TC_assignment_codec_fr_exhausted_req_fr() ); |
| execute( TC_assignment_codec_fr_exhausted_req_fr_hr() ); |
| execute( TC_assignment_codec_fr_exhausted_req_hr_fr() ); |
| execute( TC_assignment_codec_hr_exhausted_req_fr() ); |
| execute( TC_assignment_codec_hr_exhausted_req_hr() ); |
| execute( TC_assignment_codec_hr_exhausted_req_hr_fr() ); |
| execute( TC_assignment_codec_hr_exhausted_req_fr_hr() ); |
| execute( TC_assignment_codec_req_hr_fr() ); |
| execute( TC_assignment_codec_req_fr_hr() ); |
| execute( TC_assignment_sdcch_exhausted_req_signalling() ); |
| execute( TC_assignment_sdcch_exhausted_req_signalling_tch_forbidden() ); |
| execute( TC_assignment_sdcch_exhausted_req_voice_tch_forbidden() ); |
| |
| execute( TC_assignment_codec_hr_osmux_on() ); |
| execute( TC_assignment_osmux() ); |
| execute( TC_assignment_osmux_cn() ); |
| execute( TC_assignment_osmux_bts() ); |
| |
| /* RLL Establish Indication on inactive DCHAN / SAPI */ |
| execute( TC_rll_est_ind_inact_lchan() ); |
| execute( TC_rll_est_ind_inval_sapi1() ); |
| execute( TC_rll_est_ind_inval_sapi3() ); |
| execute( TC_rll_est_ind_inval_sacch() ); |
| |
| /* DLCI / RSL Link ID conversion for MO/MT messages on SAPI0/SAPI3 */ |
| execute( TC_tch_dlci_link_id_sapi() ); |
| |
| /* SAPI N Reject triggered by RLL establishment failures */ |
| execute( TC_rll_rel_ind_sapi_n_reject() ); |
| execute( TC_rll_err_ind_sapi_n_reject() ); |
| execute( TC_rll_timeout_sapi_n_reject() ); |
| execute( TC_rll_sapi_n_reject_dlci_cc() ); |
| |
| /* Paging related tests */ |
| execute( TC_paging_imsi_nochan() ); |
| execute( TC_paging_tmsi_nochan() ); |
| execute( TC_paging_tmsi_any() ); |
| execute( TC_paging_tmsi_sdcch() ); |
| execute( TC_paging_tmsi_tch_f() ); |
| execute( TC_paging_tmsi_tch_hf() ); |
| execute( TC_paging_imsi_nochan_cgi() ); |
| execute( TC_paging_imsi_nochan_lac_ci() ); |
| execute( TC_paging_imsi_nochan_ci() ); |
| execute( TC_paging_imsi_nochan_lai() ); |
| execute( TC_paging_imsi_nochan_lac() ); |
| execute( TC_paging_imsi_nochan_all() ); |
| execute( TC_paging_imsi_nochan_plmn_lac_rnc() ); |
| execute( TC_paging_imsi_nochan_rnc() ); |
| execute( TC_paging_imsi_nochan_lac_rnc() ); |
| execute( TC_paging_imsi_nochan_lacs() ); |
| execute( TC_paging_imsi_nochan_lacs_empty() ); |
| execute( TC_paging_imsi_nochan_cgi_unknown_cid() ); |
| execute( TC_paging_imsi_a_reset() ); |
| execute( TC_paging_imsi_load() ); |
| execute( TC_paging_counter() ); |
| execute( TC_paging_resp_unsol() ); |
| execute( TC_paging_500req() ); |
| execute( TC_paging_450req_no_paging_load_ind() ); |
| |
| execute( TC_rsl_drop_counter() ); |
| execute( TC_rsl_unknown_unit_id() ); |
| |
| execute( TC_oml_unknown_unit_id() ); |
| |
| execute( TC_classmark() ); |
| execute( TC_common_id() ); |
| execute( TC_unsol_ass_fail() ); |
| execute( TC_unsol_ass_compl() ); |
| execute( TC_unsol_ho_fail() ); |
| execute( TC_err_82_short_msg() ); |
| execute( TC_err_84_unknown_msg() ); |
| |
| execute( TC_ho_int() ); |
| execute( TC_ho_int_a5_0() ); |
| execute( TC_ho_int_a5_1() ); |
| execute( TC_ho_int_a5_3() ); |
| execute( TC_ho_int_a5_4() ); |
| execute( TC_ho_int_radio_link_failure() ); |
| |
| /* TC_ho_out_of_this_bsc is run last, see comment below */ |
| execute( TC_ho_out_fail_no_msc_response() ); |
| execute( TC_ho_out_fail_rr_ho_failure() ); |
| execute( TC_ho_out_fail_no_result_after_ho_cmd() ); |
| |
| execute( TC_ho_into_this_bsc() ); |
| execute( TC_ho_into_this_bsc_a5_0() ); |
| execute( TC_ho_into_this_bsc_a5_1() ); |
| execute( TC_ho_into_this_bsc_a5_3() ); |
| execute( TC_ho_into_this_bsc_a5_4() ); |
| execute( TC_ho_into_this_bsc_a5_1_3_no_chosen_enc_alg() ); |
| execute( TC_ho_into_this_bsc_a5_1_3() ); |
| execute( TC_ho_into_this_bsc_a5_mismatch() ); |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_ho_into_this_bsc_tla_v6() ); |
| } |
| execute( TC_srvcc_eutran_to_geran() ); |
| execute( TC_srvcc_eutran_to_geran_a5_3() ); |
| execute( TC_srvcc_eutran_to_geran_src_sai() ); |
| execute( TC_srvcc_eutran_to_geran_ho_out() ); |
| execute( TC_srvcc_eutran_to_geran_forbid_fast_return() ); |
| execute( TC_srvcc_eutran_to_geran_ho_out_forbid_fast_return() ); |
| execute( TC_ho_in_fail_msc_clears() ); |
| execute( TC_ho_in_fail_msc_clears_after_ho_detect() ); |
| execute( TC_ho_in_fail_no_detect() ); |
| execute( TC_ho_in_fail_no_detect2() ); |
| execute( TC_ho_into_this_bsc_sccp_cr_without_bssap() ); |
| |
| execute( TC_ho_neighbor_config_1() ); |
| execute( TC_ho_neighbor_config_2() ); |
| execute( TC_ho_neighbor_config_3() ); |
| execute( TC_ho_neighbor_config_4() ); |
| execute( TC_ho_neighbor_config_5() ); |
| execute( TC_ho_neighbor_config_6() ); |
| execute( TC_ho_neighbor_config_7() ); |
| |
| execute( TC_bssap_rlsd_does_not_cause_bssmap_reset() ); |
| execute( TC_bssmap_clear_does_not_cause_bssmap_reset() ); |
| execute( TC_ms_rel_ind_does_not_cause_bssmap_reset() ); |
| |
| execute( TC_dyn_pdch_ipa_act_deact() ); |
| execute( TC_dyn_pdch_ipa_act_nack() ); |
| execute( TC_dyn_pdch_osmo_act_deact() ); |
| execute( TC_dyn_pdch_osmo_act_nack() ); |
| execute( TC_dyn_ts_sdcch8_act_deact() ); |
| execute( TC_dyn_ts_sdcch8_all_subslots_used() ); |
| execute( TC_dyn_ts_sdcch8_tch_call_act_deact() ); |
| execute( TC_dyn_ts_sdcch8_act_nack() ); |
| |
| execute( TC_chopped_ipa_ping() ); |
| execute( TC_chopped_ipa_payload() ); |
| |
| /* Power control related */ |
| execute( TC_assignment_verify_ms_power_params_ie() ); |
| execute( TC_c0_power_red_mode() ); |
| |
| /* MSC pooling */ |
| /* FIXME: in SCCPlite, indicating how many MSCs should be connected does currently not work. Since |
| * RESET->RESET-ACK is unconditionally negotiated for all configured MSCs, they always all appear as connected |
| * to osmo-bsc. The MSC pooling tests however require disconnecting selected MSCs, and hence don't work out as |
| * intended on SCCPlite. So for now, run these only for SCCP/M3UA. */ |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_mscpool_L3Compl_on_1_msc() ); |
| execute( TC_mscpool_L3Complete_by_imsi_round_robin() ); |
| execute( TC_mscpool_LU_by_tmsi_null_nri_0_round_robin() ); |
| execute( TC_mscpool_LU_by_tmsi_null_nri_1_round_robin() ); |
| execute( TC_mscpool_L3Complete_by_tmsi_unassigned_nri_round_robin() ); |
| execute( TC_mscpool_L3Complete_by_tmsi_valid_nri_msc_not_connected_round_robin() ); |
| execute( TC_mscpool_L3Complete_by_tmsi_valid_nri_1() ); |
| execute( TC_mscpool_L3Complete_by_tmsi_valid_nri_2() ); |
| execute( TC_mscpool_LU_by_tmsi_from_other_PLMN() ); |
| execute( TC_mscpool_paging_and_response_imsi() ); |
| execute( TC_mscpool_paging_and_response_tmsi() ); |
| execute( TC_mscpool_no_allow_attach_round_robin() ); |
| execute( TC_mscpool_no_allow_attach_valid_nri() ); |
| } |
| |
| execute( TC_early_conn_fail() ); |
| execute( TC_late_conn_fail() ); |
| execute( TC_stats_conn_fail() ); |
| |
| /* Emergency call handling (deny / allow) */ |
| execute( TC_assignment_emerg_setup_allow() ); |
| execute( TC_assignment_emerg_setup_deny_msc() ); |
| execute( TC_assignment_emerg_setup_deny_bts() ); |
| execute( TC_emerg_premption() ); |
| |
| /* Frequency hopping parameters handling */ |
| execute( TC_fh_params_chan_activ() ); |
| execute( TC_fh_params_imm_ass() ); |
| execute( TC_fh_params_assignment_cmd() ); |
| execute( TC_fh_params_handover_cmd() ); |
| execute( TC_fh_params_si4_cbch() ); |
| |
| if (mp_enable_lcs_tests) { |
| execute( TC_lcs_loc_req_for_active_ms() ); |
| execute( TC_lcs_loc_req_for_active_ms_ta_req() ); |
| execute( TC_lcs_loc_req_for_idle_ms() ); |
| execute( TC_lcs_loc_req_no_subscriber() ); |
| execute( TC_lcs_loc_req_for_active_ms_le_timeout() ); |
| execute( TC_lcs_loc_req_for_active_ms_le_timeout2() ); |
| execute( TC_lcs_loc_req_for_idle_ms_no_pag_resp() ); |
| execute( TC_cm_service_during_lcs_loc_req() ); |
| execute( TC_ho_during_lcs_loc_req() ); |
| execute( TC_emerg_call_and_lcs_loc_req() ); |
| execute( TC_emerg_call_and_lcs_loc_req_early_lchan_rel_ind() ); |
| execute( TC_emerg_call_and_lcs_loc_req_early_lchan_conn_fail() ); |
| } |
| |
| execute( TC_no_msc() ); |
| |
| execute( TC_refuse_chan_act_to_vamos() ); |
| execute( TC_refuse_mode_modif_to_vamos() ); |
| |
| execute( TC_reassignment_fr() ); |
| |
| execute( TC_cm_reestablishment() ); |
| |
| execute( TC_imm_ass_post_chan_ack() ); |
| execute( TC_imm_ass_pre_chan_ack() ); |
| execute( TC_imm_ass_pre_ts_ack() ); |
| execute( TC_imm_ass_pre_chan_ack_dyn_ts() ); |
| execute( TC_imm_ass_pre_ts_ack_dyn_ts() ); |
| |
| execute( TC_ctrl_trx_rf_locked() ); |
| |
| execute( TC_ratectr_all_available_allocated() ); |
| execute( TC_ratectr_all_available_allocated_dyn() ); |
| |
| execute( TC_cm_serv_rej() ); |
| |
| execute( TC_lost_sdcch_during_assignment() ); |
| |
| /* Channel allocator */ |
| execute( TC_chan_alloc_algo_ascending() ); |
| execute( TC_chan_alloc_algo_descending() ); |
| execute( TC_chan_alloc_algo_ass_dynamic() ); |
| |
| /* Run TC_ho_out_of_this_bsc last, because it may trigger a segfault before osmo-bsc's patch |
| * with change-id I5a3345ab0005a73597f5c27207480912a2f5aae6 */ |
| execute( TC_ho_out_of_this_bsc() ); |
| } |
| |
| } |