| module BSC_Tests { |
| |
| /* Integration Tests for OsmoBSC |
| * (C) 2017-2018 by Harald Welte <laforge@gnumonks.org> |
| * All rights reserved. |
| * |
| * Released under the terms of GNU General Public License, Version 2 or |
| * (at your option) any later version. |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| * |
| * This test suite tests OsmoBSC while emulating both multiple BTS + MS as |
| * well as the MSC. See README for more details. |
| * |
| * There are test cases that run in so-called 'handler mode' and test cases |
| * that run directly on top of the BSSAP and RSL CodecPorts. The "handler mode" |
| * tests abstract the multiplexing/demultiplexing of multiple SCCP connections |
| * and/or RSL channels and are hence suitable for higher-level test cases, while |
| * the "raw" tests directly on top of the CodecPorts are more suitable for lower- |
| * level testing. |
| */ |
| |
| import from Misc_Helpers all; |
| import from General_Types all; |
| import from Osmocom_Types all; |
| import from GSM_Types all; |
| import from IPL4asp_Types all; |
| |
| import from BSSAP_Types all; |
| import from RAN_Adapter all; |
| import from BSSAP_CodecPort all; |
| import from BSSMAP_Templates all; |
| import from IPA_Emulation all; |
| import from IPA_CodecPort all; |
| import from IPA_Types all; |
| import from IPA_Testing all; |
| import from RSL_Types all; |
| import from RSL_Emulation all; |
| import from MGCP_Emulation all; |
| import from MGCP_Templates all; |
| import from MGCP_Types all; |
| import from MGCP_CodecPort all; |
| |
| import from Osmocom_CTRL_Functions all; |
| import from Osmocom_CTRL_Types all; |
| import from Osmocom_CTRL_Adapter all; |
| |
| import from StatsD_Types all; |
| import from StatsD_CodecPort all; |
| import from StatsD_CodecPort_CtrlFunct all; |
| import from StatsD_Checker all; |
| |
| import from Osmocom_VTY_Functions all; |
| import from TELNETasp_PortType all; |
| |
| import from MobileL3_CommonIE_Types all; |
| import from MobileL3_Types all; |
| import from MobileL3_RRM_Types all; |
| import from L3_Templates all; |
| import from GSM_RR_Types all; |
| |
| import from SCCP_Templates all; |
| import from BSSMAP_Templates all; |
| |
| import from SCCPasp_Types all; |
| |
| import from GSM_SystemInformation all; |
| import from GSM_RestOctets all; |
| import from TCCConversion_Functions all; |
| |
| const integer NUM_BTS := 3; |
| const integer NUM_MSC := 3; |
| const float T3101_MAX := 12.0; |
| |
| /* make sure to sync this with the osmo-bts.cfg you're using */ |
| const integer NUM_TCHH_PER_BTS := 2; |
| const integer NUM_TCHF_PER_BTS := 4; |
| const integer NUM_SDCCH_PER_BTS := 3; |
| |
| |
| /* per-BTS state which we keep */ |
| type record BTS_State { |
| /* component reference to the IPA_Client component used for RSL */ |
| IPA_Client rsl |
| } |
| |
| /* Default list of counters for an 'msc' entity. */ |
| const CounterNameVals counternames_msc_mscpool := { |
| { "mscpool:subscr:new", 0 }, |
| { "mscpool:subscr:known", 0 }, |
| { "mscpool:subscr:reattach", 0 }, |
| { "mscpool:subscr:attach_lost", 0 }, |
| { "mscpool:subscr:paged", 0 } |
| }; |
| |
| /* Default list of counters for 'bsc' and 'bts' entities. */ |
| const CounterNameVals counternames_bsc_bts_handover := { |
| { "assignment:attempted", 0 }, |
| { "assignment:completed", 0 }, |
| { "assignment:stopped", 0 }, |
| { "assignment:no_channel", 0 }, |
| { "assignment:timeout", 0 }, |
| { "assignment:failed", 0 }, |
| { "assignment:error", 0 }, |
| |
| { "handover:attempted", 0 }, |
| { "handover:completed", 0 }, |
| { "handover:stopped", 0 }, |
| { "handover:no_channel", 0 }, |
| { "handover:timeout", 0 }, |
| { "handover:failed", 0 }, |
| { "handover:error", 0 }, |
| |
| { "intra_cell_ho:attempted", 0 }, |
| { "intra_cell_ho:completed", 0 }, |
| { "intra_cell_ho:stopped", 0 }, |
| { "intra_cell_ho:no_channel", 0 }, |
| { "intra_cell_ho:timeout", 0 }, |
| { "intra_cell_ho:failed", 0 }, |
| { "intra_cell_ho:error", 0 }, |
| |
| { "intra_bsc_ho:attempted", 0 }, |
| { "intra_bsc_ho:completed", 0 }, |
| { "intra_bsc_ho:stopped", 0 }, |
| { "intra_bsc_ho:no_channel", 0 }, |
| { "intra_bsc_ho:timeout", 0 }, |
| { "intra_bsc_ho:failed", 0 }, |
| { "intra_bsc_ho:error", 0 }, |
| |
| { "interbsc_ho_out:attempted", 0 }, |
| { "interbsc_ho_out:completed", 0 }, |
| { "interbsc_ho_out:stopped", 0 }, |
| { "interbsc_ho_out:timeout", 0 }, |
| { "interbsc_ho_out:failed", 0 }, |
| { "interbsc_ho_out:error", 0 }, |
| |
| { "interbsc_ho_in:attempted", 0 }, |
| { "interbsc_ho_in:completed", 0 }, |
| { "interbsc_ho_in:stopped", 0 }, |
| { "interbsc_ho_in:no_channel", 0 }, |
| { "interbsc_ho_in:timeout", 0 }, |
| { "interbsc_ho_in:failed", 0 }, |
| { "interbsc_ho_in:error", 0 } |
| }; |
| |
| /* Set of all System Information received during one RSL port's startup. |
| * Note that some System Information may be sent on RSL, but lacking actual SI data, to indicate that the BTS should not |
| * broadcast that SI type. That will be reflected as 'omit' here. |
| */ |
| type record SystemInformationConfig { |
| SystemInformationType1 si1 optional, |
| SystemInformationType2 si2 optional, |
| SystemInformationType2bis si2bis optional, |
| SystemInformationType2ter si2ter optional, |
| SI2quaterRestOctetsList si2quater optional, |
| SystemInformationType3 si3 optional, |
| SystemInformationType4 si4 optional, |
| /* TODO: replace with proper decoding of SI13, implement SI13 in GSM_SystemInformation.ttcn */ |
| octetstring si13 optional, |
| SystemInformationType5 si5 optional, |
| SystemInformationType5bis si5bis optional, |
| SystemInformationType5ter si5ter optional, |
| SystemInformationType6 si6 optional |
| }; |
| |
| const SystemInformationConfig SystemInformationConfig_omit := { |
| si1 := omit, |
| si2 := omit, |
| si2bis := omit, |
| si2ter := omit, |
| si2quater := omit, |
| si3 := omit, |
| si4 := omit, |
| si13 := omit, |
| si5 := omit, |
| si5bis := omit, |
| si5ter := omit, |
| si6 := omit |
| }; |
| |
| /* tr_EUTRAN_CellDesc with defaults used in BSC_Tests.ttcn */ |
| template EUTRAN_CellDesc tr_EUTRAN_CellDesc_default(template (present) uint16_t e_arfcn := ?, |
| template uint3_t meas_bw := 3) |
| := tr_EUTRAN_CellDesc(e_arfcn := e_arfcn, |
| meas_bw_presence := '1'B, |
| meas_bw := meas_bw); |
| |
| /* tr_EUTRAN_NeighbourCells with defaults used in BSC_Tests.ttcn */ |
| template EUTRAN_NeighbourCells tr_EUTRAN_NeighbourCells_default(template (present) EUTRAN_CellDescs cell_desc_list := { tr_EUTRAN_CellDesc_default }, |
| template uint3_t prio := 3, |
| template (present) uint5_t thresh_high := 20, |
| template uint5_t thresh_low := 10, |
| template uint5_t qrxlevmin := 22) |
| := tr_EUTRAN_NeighbourCells( |
| cell_desc_list := cell_desc_list, |
| prio_presence := '1'B, |
| prio := prio, |
| thresh_high := thresh_high, |
| thresh_low_presence := '1'B, |
| thresh_low := thresh_low, |
| qrxlevmin_presence := '1'B, |
| qrxlevmin := qrxlevmin); |
| |
| template SystemInformationConfig SystemInformationConfig_default := { |
| si1 := { |
| cell_chan_desc := '8FB38000000000000000000000000000'O, |
| rach_control := { |
| max_retrans := RACH_MAX_RETRANS_7, |
| tx_integer := '1001'B, |
| cell_barr_access := false, |
| re_not_allowed := true, |
| acc := '0000010000000000'B |
| }, |
| rest_octets := ? |
| }, |
| si2 := { |
| bcch_freq_list := '00000000000000000000000000000000'O, |
| ncc_permitted := '11111111'B, |
| rach_control := { |
| max_retrans := RACH_MAX_RETRANS_7, |
| tx_integer := '1001'B, |
| cell_barr_access := false, |
| re_not_allowed := true, |
| acc := '0000010000000000'B |
| } |
| }, |
| si2bis := omit, |
| si2ter := { |
| extd_bcch_freq_list := '8E320000000000000000000000000800'O, |
| rest_octets := ? |
| }, |
| si2quater := { |
| tr_SI2quaterRestOctets_EUTRAN( repeated_neigh_cells := { tr_EUTRAN_NeighbourCells_default } ) |
| }, |
| si3 := { |
| cell_id := 0, |
| lai := { |
| mcc_mnc := '001F01'H, |
| lac := 1 |
| }, |
| ctrl_chan_desc := { |
| msc_r99 := true, |
| att := true, |
| bs_ag_blks_res := 1, |
| ccch_conf := CCHAN_DESC_1CCCH_COMBINED, |
| si22ind := false, |
| cbq3 := CBQ3_IU_MODE_NOT_SUPPORTED, |
| spare := '00'B, |
| bs_pa_mfrms := 3, |
| t3212 := 30 |
| }, |
| cell_options := { |
| dn_ind := false, |
| pwrc := false, |
| dtx := MS_SHALL_USE_UL_DTX, |
| radio_link_tout_div4 := 7 |
| }, |
| cell_sel_par := { |
| cell_resel_hyst_2dB := 2, |
| ms_txpwr_max_cch := 7, |
| acs := '0'B, |
| neci := true, |
| rxlev_access_min := 0 |
| }, |
| rach_control := { |
| max_retrans := RACH_MAX_RETRANS_7, |
| tx_integer := '1001'B, |
| cell_barr_access := false, |
| re_not_allowed := true, |
| acc := '0000010000000000'B |
| }, |
| rest_octets := { |
| sel_params := { |
| presence := '0'B, |
| params := omit |
| }, |
| pwr_offset := { |
| presence := '0'B, |
| offset := omit |
| }, |
| si_2ter_ind := '1'B, |
| early_cm_ind := '0'B, |
| sched_where := { |
| presence := '0'B, |
| where := omit |
| }, |
| gprs_ind := { |
| presence := '1'B, |
| ind := { |
| ra_colour := 0, |
| si13_pos := '0'B |
| } |
| }, |
| umts_early_cm_ind := '1'B, |
| si2_quater_ind := { |
| presence := '1'B, |
| ind := '0'B |
| }, |
| iu_mode_ind := omit, |
| si21_ind := { |
| presence := '0'B, |
| pos := omit |
| } |
| } |
| }, |
| si4 := { |
| lai := { |
| mcc_mnc := '001F01'H, |
| lac := 1 |
| }, |
| cell_sel_par := { |
| cell_resel_hyst_2dB := 2, |
| ms_txpwr_max_cch := 7, |
| acs := '0'B, |
| neci := true, |
| rxlev_access_min := 0 |
| }, |
| rach_control := { |
| max_retrans := RACH_MAX_RETRANS_7, |
| tx_integer := '1001'B, |
| cell_barr_access := false, |
| re_not_allowed := true, |
| acc := '0000010000000000'B |
| }, |
| cbch_chan_desc := { |
| iei := '64'O, |
| v := { |
| chan_nr := { |
| u := { |
| sdcch4 := { |
| tag := '001'B, |
| sub_chan := 2 |
| } |
| }, |
| tn := 0 |
| }, |
| tsc := 2, |
| h := false, |
| arfcn := 871, |
| maio_hsn := omit |
| } |
| }, |
| cbch_mobile_alloc := omit, |
| rest_octets := { |
| sel_params := { |
| presence := '0'B, |
| params := omit |
| }, |
| pwr_offset := { |
| presence := '0'B, |
| offset := omit |
| }, |
| gprs_ind := { |
| presence := '1'B, |
| ind := { |
| ra_colour := 0, |
| si13_pos := '0'B |
| } |
| }, |
| s_presence := '0'B, |
| s := omit |
| } |
| }, |
| si13 := '9000185A6FC9E08410AB2B2B2B2B2B2B2B2B2B2B'O, |
| si5 := { |
| bcch_freq_list := '10000000000000000000000000000000'O |
| }, |
| si5bis := omit, |
| si5ter := { |
| extd_bcch_freq_list := '9E050020000000000000000000000000'O |
| }, |
| si6 := { |
| cell_id := 0, |
| lai := { |
| mcc_mnc := '001F01'H, |
| lac := 1 |
| }, |
| cell_options := { |
| dtx_ext := '1'B, |
| pwrc := false, |
| dtx := '01'B, |
| radio_link_timeout := '0111'B |
| }, |
| ncc_permitted := '11111111'B, |
| rest_octets := ? |
| } |
| }; |
| |
| |
| /* List of all the System Information received on all RSL ports */ |
| type record of SystemInformationConfig SystemInformationConfig_list; |
| |
| function f_sysinfo_dec_raw(inout SystemInformationConfig si, RSL_Message rsl) |
| { |
| var RSL_IE_Body sysinfo_type_ie; |
| var RSL_IE_SysinfoType si_type; |
| var octetstring data; |
| |
| if (f_rsl_find_ie(rsl, RSL_IE_SYSINFO_TYPE, sysinfo_type_ie) == false) { |
| setverdict(fail, "Cannot find RSL_IE_SYSINFO_TYPE"); |
| mtc.stop; |
| } |
| si_type := sysinfo_type_ie.sysinfo_type; |
| |
| if (rsl.msg_type == RSL_MT_BCCH_INFO) { |
| var RSL_IE_Body bcch_ie; |
| if (f_rsl_find_ie(rsl, RSL_IE_FULL_BCCH_INFO, bcch_ie)) { |
| data := bcch_ie.other.payload; |
| } |
| } else if (rsl.msg_type == RSL_MT_SACCH_FILL) { |
| var RSL_IE_Body l3_ie; |
| if (f_rsl_find_ie(rsl, RSL_IE_L3_INFO, l3_ie)) { |
| data := l3_ie.l3_info.payload; |
| } |
| } else { |
| setverdict(fail, "Don't understand this System Information message"); |
| mtc.stop; |
| } |
| |
| var boolean handled := false; |
| |
| if (rsl.msg_type == RSL_MT_BCCH_INFO) { |
| handled := true; |
| |
| if (si_type == RSL_SYSTEM_INFO_1) { |
| if (not isbound(data)) { |
| si.si1 := omit; |
| } else { |
| si.si1 := dec_SystemInformation(data).payload.si1; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_2) { |
| if (not isbound(data)) { |
| si.si2 := omit; |
| } else { |
| si.si2 := dec_SystemInformation(data).payload.si2; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_2bis) { |
| if (not isbound(data)) { |
| si.si2bis := omit; |
| } else { |
| si.si2bis := dec_SystemInformation(data).payload.si2bis; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_2ter) { |
| if (not isbound(data)) { |
| si.si2ter := omit; |
| } else { |
| si.si2ter := dec_SystemInformation(data).payload.si2ter; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_2quater) { |
| if (not isbound(data)) { |
| si.si2quater := {}; |
| } else { |
| var SystemInformationType2quater decoded := dec_SystemInformation(data).payload.si2quater; |
| /* this is a *record* of SI2quaterRestOctets! (multiplexed) */ |
| si.si2quater[decoded.rest_octets.si2quater_index] := decoded.rest_octets; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_3) { |
| if (not isbound(data)) { |
| si.si3 := omit; |
| } else { |
| si.si3 := dec_SystemInformation(data).payload.si3; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_4) { |
| if (not isbound(data)) { |
| si.si4 := omit; |
| } else { |
| si.si4 := dec_SystemInformation(data).payload.si4; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_13) { |
| if (not isbound(data)) { |
| si.si13 := omit; |
| } else { |
| si.si13 := dec_SystemInformation(data).payload.other; |
| } |
| } else { |
| handled := false; |
| } |
| } else if (rsl.msg_type == RSL_MT_SACCH_FILL) { |
| handled := true; |
| |
| if (si_type == RSL_SYSTEM_INFO_5) { |
| if (not isbound(data)) { |
| si.si5 := omit; |
| } else { |
| si.si5 := dec_SystemInformation(data).payload.si5; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_5bis) { |
| if (not isbound(data)) { |
| si.si5bis := omit; |
| } else { |
| si.si5bis := dec_SystemInformation(data).payload.si5bis; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_5ter) { |
| if (not isbound(data)) { |
| si.si5ter := omit; |
| } else { |
| si.si5ter := dec_SystemInformation(data).payload.si5ter; |
| } |
| } else if (si_type == RSL_SYSTEM_INFO_6) { |
| if (not isbound(data)) { |
| si.si6 := omit; |
| } else { |
| si.si6 := dec_SystemInformation(data).payload.si6; |
| } |
| } else { |
| handled := false; |
| } |
| } |
| |
| if (not handled) { |
| setverdict(fail, "Unexpected SI type in ", rsl.msg_type, " message: ", si_type); |
| } |
| } |
| |
| type component test_CT extends CTRL_Adapter_CT { |
| /* Array of per-BTS state */ |
| var BTS_State bts[NUM_BTS]; |
| /* RSL common Channel Port (for RSL_Emulation) */ |
| port RSL_CCHAN_PT RSL_CCHAN[NUM_BTS]; |
| /* array of per-BTS RSL test ports */ |
| port IPA_RSL_PT IPA_RSL[NUM_BTS]; |
| port IPA_CODEC_PT IPA; /* Required for compilation of TC_rsl_unknown_unit_id() */ |
| /* CTRL muxed over IPA in SCCPlite conn BSC<->MSC (or BSC-NAT) */ |
| port IPA_CTRL_PT SCCPLITE_IPA_CTRL; |
| |
| var MGCP_Emulation_CT vc_MGCP; |
| port TELNETasp_PT BSCVTY; |
| |
| /* StatsD */ |
| var StatsD_Checker_CT vc_STATSD; |
| |
| var RAN_Adapter g_bssap[NUM_MSC]; |
| /* for old legacy-tests only */ |
| port BSSAP_CODEC_PT BSSAP; |
| |
| /* are we initialized yet */ |
| var boolean g_initialized := false; |
| |
| /* Osmux is enabled through VTY */ |
| var boolean g_osmux_enabled := false; |
| |
| /*Configure T(tias) over VTY, seconds */ |
| var integer g_bsc_sccp_timer_ias := 7 * 60; |
| /*Configure T(tiar) over VTY, seconds */ |
| var integer g_bsc_sccp_timer_iar := 15 * 60; |
| |
| /* global test case guard timer (actual timeout value is set in f_init()) */ |
| timer T_guard := 30.0; |
| |
| var CounterNameValsList g_ctr_msc; |
| var CounterNameValsList g_ctr_bsc; |
| var CounterNameValsList g_ctr_bts; |
| |
| /* System Information bytes as received during RSL startup, for each RSL[idx]. */ |
| var SystemInformationConfig_list g_system_information := {}; |
| } |
| |
| modulepar { |
| /* IP address at which the BSC can be reached */ |
| charstring mp_bsc_ip := "127.0.0.1"; |
| /* port number to which to establish the IPA OML connections */ |
| integer mp_bsc_oml_port := 3002; |
| /* port number to which to establish the IPA RSL connections */ |
| integer mp_bsc_rsl_port := 3003; |
| /* port number to which to establish the IPA CTRL connection */ |
| integer mp_bsc_ctrl_port := 4249; |
| /* port number to which to listen for STATSD metrics */ |
| integer mp_bsc_statsd_port := 8125; |
| /* IP address at which the test binds */ |
| charstring mp_test_ip := "127.0.0.1"; |
| |
| RAN_Configurations mp_bssap_cfg := { |
| { |
| transport := BSSAP_TRANSPORT_AoIP, |
| sccp_service_type := "mtp3_itu", |
| sctp_addr := { 23905, "127.0.0.1", 2905, "127.0.0.1" }, |
| own_pc := 185, /* 0.23.1 first MSC emulation */ |
| own_ssn := 254, |
| peer_pc := 187, /* 0.23.3 osmo-bsc */ |
| peer_ssn := 254, |
| sio := '83'O, |
| rctx := 1 |
| }, |
| { |
| transport := BSSAP_TRANSPORT_AoIP, |
| sccp_service_type := "mtp3_itu", |
| sctp_addr := { 23906, "127.0.0.1", 2905, "127.0.0.1" }, |
| own_pc := 2, /* 0.0.2 second MSC emulation */ |
| own_ssn := 254, |
| peer_pc := 187, /* 0.23.3 osmo-bsc */ |
| peer_ssn := 254, |
| sio := '83'O, |
| rctx := 2 |
| }, |
| { |
| transport := BSSAP_TRANSPORT_AoIP, |
| sccp_service_type := "mtp3_itu", |
| sctp_addr := { 23907, "127.0.0.1", 2905, "127.0.0.1" }, |
| own_pc := 3, /* 0.0.3 third MSC emulation */ |
| own_ssn := 254, |
| peer_pc := 187, /* 0.23.3 osmo-bsc */ |
| peer_ssn := 254, |
| sio := '83'O, |
| rctx := 3 |
| } |
| }; |
| |
| /* Whether to enable osmux tests. Can be dropped completely and enable |
| unconditionally once new version of osmo-bsc is released (current |
| version: 1.4.1) */ |
| boolean mp_enable_osmux_test := true; |
| /* Value set in osmo-bsc.cfg "ms max power" */ |
| uint8_t mp_exp_ms_power_level := 7; |
| } |
| |
| private function f_gen_test_hdlr_pars(integer bssap_idx := 0) return TestHdlrParams { |
| |
| var TestHdlrParams pars := valueof(t_def_TestHdlrPars); |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| pars.aoip := true; |
| } else { |
| pars.aoip := false; |
| } |
| pars.exp_ms_power_level := mp_exp_ms_power_level; |
| pars.mscpool.bssap_idx := bssap_idx; |
| |
| return pars; |
| } |
| |
| /* Convenience functions for rate counters using g_ctr_msc. */ |
| |
| private function f_ctrs_msc_init(integer mscs_count := NUM_MSC, CounterNameVals counternames := counternames_msc_mscpool) runs on test_CT { |
| g_ctr_msc := f_counter_name_vals_get_n(IPA_CTRL, "msc", mscs_count, counternames); |
| log("initial msc rate counters: ", g_ctr_msc); |
| } |
| |
| private function f_ctrs_msc_add(integer msc_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_counter_name_vals_list_add(g_ctr_msc, msc_nr, countername, val); |
| } |
| |
| /* f_ctrs_msc_init(); |
| * f_do_thing(on_msc := 0); |
| * f_do_thing(on_msc := 0); |
| * f_do_other(on_msc := 1); |
| * f_ctrs_msc_add(0, "thing", 2); |
| * f_ctrs_msc_add(1, "other"); |
| * f_ctrs_msc_verify(); |
| */ |
| private function f_ctrs_msc_verify() runs on test_CT { |
| log("verifying msc rate counters: ", g_ctr_msc); |
| f_counter_name_vals_expect_n(IPA_CTRL, "msc", g_ctr_msc); |
| } |
| |
| /* convenience: f_ctrs_msc_add() and f_ctrs_msc_verify() in one call. |
| * f_ctrs_msc_init(); |
| * f_do_thing(on_msc := 0); |
| * f_do_thing(on_msc := 0); |
| * f_do_thing(on_msc := 0); |
| * f_ctrs_msc_expect(0, "thing", 3); |
| */ |
| private function f_ctrs_msc_expect(integer msc_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_ctrs_msc_add(msc_nr, countername, val); |
| f_ctrs_msc_verify(); |
| } |
| |
| /* Convenience functions for rate counters using g_ctr_bts, always also including g_ctr_bsc. */ |
| |
| private function f_ctrs_bsc_and_bts_init(integer bts_count := NUM_BTS, CounterNameVals counternames := counternames_bsc_bts_handover) runs on test_CT { |
| g_ctr_bts := f_counter_name_vals_get_n(IPA_CTRL, "bts", bts_count, counternames); |
| log("initial bts rate counters: ", g_ctr_bts); |
| f_ctrs_bsc_init(counternames); |
| } |
| |
| private function f_ctrs_bsc_and_bts_add(integer bts_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_counter_name_vals_list_add(g_ctr_bts, bts_nr, countername, val); |
| f_ctrs_bsc_add(countername, val); |
| } |
| |
| /* f_ctrs_bsc_and_bts_init(); |
| * f_do_thing(on_bts := 0); |
| * f_do_thing(on_bts := 0); |
| * f_do_other(on_bts := 1); |
| * f_ctrs_bsc_and_bts_add(0, "thing", 2); |
| * f_ctrs_bsc_and_bts_add(1, "other"); |
| * f_ctrs_bsc_and_bts_verify(); |
| */ |
| private function f_ctrs_bsc_and_bts_verify() runs on test_CT { |
| f_counter_name_vals_expect_n(IPA_CTRL, "bts", g_ctr_bts); |
| f_ctrs_bsc_verify(); |
| } |
| |
| /* convenience: f_ctrs_bsc_and_bts_add() and f_ctrs_bsc_and_bts_verify() in one call. |
| * f_ctrs_bsc_and_bts_init(); |
| * f_do_thing(on_bts := 0); |
| * f_do_thing(on_bts := 0); |
| * f_do_thing(on_bts := 0); |
| * f_ctrs_bsc_and_bts_expect(0, "thing", 3); |
| */ |
| private function f_ctrs_bsc_and_bts_expect(integer bts_nr, charstring countername, integer val := 1) runs on test_CT { |
| f_ctrs_bsc_and_bts_add(bts_nr, countername, val); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| |
| /* Convenience functions for rate counters using g_ctr_bsc. */ |
| |
| private function f_ctrs_bsc_init(CounterNameVals counternames := counternames_bsc_bts_handover) runs on test_CT { |
| g_ctr_bsc := f_counter_name_vals_get_n(IPA_CTRL, "bsc", 1, counternames); |
| log("initial bsc rate counters: ", g_ctr_bsc); |
| } |
| |
| private function f_ctrs_bsc_add(charstring countername, integer val := 1) runs on test_CT { |
| f_counter_name_vals_list_add(g_ctr_bsc, 0, countername, val); |
| } |
| |
| /* f_ctrs_bsc_init(); |
| * f_do_thing(); |
| * f_do_thing(); |
| * f_do_other(); |
| * f_ctrs_bsc_add("thing", 2); |
| * f_ctrs_bsc_add("other"); |
| * f_ctrs_bsc_verify(); |
| */ |
| private function f_ctrs_bsc_verify() runs on test_CT { |
| f_counter_name_vals_expect_n(IPA_CTRL, "bsc", g_ctr_bsc); |
| } |
| |
| /* convenience: f_ctrs_bsc_add() and f_ctrs_bsc_verify() in one call. |
| * f_ctrs_bsc_init(); |
| * f_do_thing(); |
| * f_ctrs_bsc_expect("thing", 1); |
| */ |
| private function f_ctrs_bsc_expect(charstring countername, integer val := 1) runs on test_CT { |
| f_ctrs_bsc_add(countername, val); |
| f_ctrs_bsc_verify(); |
| } |
| |
| |
| private function f_shutdown_helper() runs on test_CT { |
| all component.stop; |
| setverdict(pass); |
| mtc.stop; |
| } |
| |
| private function f_legacy_bssap_reset(integer bssap_idx := 0) runs on test_CT { |
| var BSSAP_N_UNITDATA_ind ud_ind; |
| timer T := 5.0; |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[bssap_idx].sccp_addr_peer, g_bssap[bssap_idx].sccp_addr_own, |
| ts_BSSMAP_Reset(0, g_osmux_enabled))); |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(g_bssap[bssap_idx].sccp_addr_own, g_bssap[bssap_idx].sccp_addr_peer, |
| tr_BSSMAP_ResetAck(g_osmux_enabled))) { |
| log("Received RESET-ACK in response to RESET, we're ready to go!"); |
| } |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(?, ?, tr_BSSMAP_Reset(g_osmux_enabled))) -> value ud_ind { |
| log("Respoding to inbound RESET with RESET-ACK"); |
| BSSAP.send(ts_BSSAP_UNITDATA_req(ud_ind.callingAddress, ud_ind.calledAddress, |
| ts_BSSMAP_ResetAck(g_osmux_enabled))); |
| repeat; |
| } |
| [] BSSAP.receive { repeat; } |
| [] T.timeout { setverdict(fail, "Waiting for RESET-ACK after sending RESET"); } |
| } |
| } |
| |
| type record IPA_Client { |
| /* IPA Emulation component reference */ |
| IPA_Emulation_CT vc_IPA, |
| /* Unit-ID and other CCM parameters to use for IPA client emulation */ |
| IPA_CCM_Parameters ccm_pars, |
| /* String identifier for this IPA Client */ |
| charstring id, |
| /* Associated RSL Emulation Component (if any). Only used in "Handler mode" */ |
| RSL_Emulation_CT vc_RSL optional |
| } |
| |
| /*! Start the IPA/RSL related bits for one IPA_Client. |
| * \param clnt IPA_Client for which to establish |
| * \param bsc_host IP address / hostname of the BSC |
| * \param bsc_port TCP port number of the BSC |
| * \param i number identifying this BTS |
| * \param handler_mode Start an RSL_Emulation_CT component (true) or not (false) */ |
| function f_ipa_rsl_start(inout IPA_Client clnt, charstring bsc_host, PortNumber bsc_port, integer i, |
| boolean handler_mode := false) |
| runs on test_CT { |
| timer T := 10.0; |
| |
| clnt.id := "IPA" & int2str(i) & "-RSL"; |
| clnt.vc_IPA := IPA_Emulation_CT.create(clnt.id & "-IPA"); |
| clnt.ccm_pars := c_IPA_default_ccm_pars; |
| clnt.ccm_pars.name := "Osmocom TTCN-3 BTS Simulator"; |
| clnt.ccm_pars.unit_id := int2str(1234+i) & "/0/0"; |
| if (handler_mode) { |
| clnt.vc_RSL := RSL_Emulation_CT.create(clnt.id & "-RSL"); |
| connect(clnt.vc_RSL:CCHAN_PT, self:RSL_CCHAN[i]); |
| } |
| |
| map(clnt.vc_IPA:IPA_PORT, system:IPA_CODEC_PT); |
| if (handler_mode) { |
| connect(clnt.vc_IPA:IPA_RSL_PORT, clnt.vc_RSL:IPA_PT); |
| } else { |
| connect(clnt.vc_IPA:IPA_RSL_PORT, self:IPA_RSL[i]); |
| } |
| |
| clnt.vc_IPA.start(IPA_Emulation.main_client(bsc_host, bsc_port, "", 10000+i, clnt.ccm_pars)); |
| if (handler_mode) { |
| clnt.vc_RSL.start(RSL_Emulation.main()); |
| return; |
| } |
| |
| /* wait for IPA RSL link to connect and send ID ACK */ |
| T.start; |
| alt { |
| [] IPA_RSL[i].receive(tr_ASP_IPA_EV(ASP_IPA_EVENT_ID_ACK)) { |
| T.stop; |
| IPA_RSL[i].send(ts_ASP_RSL_UD(ts_RSL_PAGING_LOAD_IND(23))); |
| } |
| [] IPA_RSL[i].receive(ASP_IPA_Event:?) { repeat } |
| [] IPA_RSL[i].receive { repeat } |
| [] T.timeout { |
| setverdict(fail, "Timeout RSL waiting for ASP_IPA_EVENT_ID_ACK"); |
| mtc.stop; |
| } |
| } |
| } |
| |
| function f_ipa_rsl_stop(inout IPA_Client clnt) runs on test_CT { |
| if (not isbound(clnt) or not isbound(clnt.vc_IPA)) { |
| return; |
| } |
| clnt.vc_IPA.stop; |
| if (isbound(clnt.vc_RSL)) { |
| clnt.vc_RSL.stop; |
| } |
| } |
| |
| /* Wait for the OML connection to be brought up by the external osmo-bts-omldummy */ |
| function f_wait_oml(integer bts_nr, charstring status, float secs_max) runs on test_CT { |
| timer T := secs_max; |
| T.start; |
| while (true) { |
| if (f_ctrl_get_bts(IPA_CTRL, bts_nr, "oml-connection-state") == status) { |
| T.stop; |
| /* the 'degraded' state exists from OML connection time, and we have to wait |
| * until all MO's are initialized */ |
| T.start(1.0); |
| T.timeout; |
| return; |
| } |
| f_sleep(0.1); |
| if (not T.running) { |
| setverdict(fail, "Timeout waiting for BTS" & int2str(bts_nr) & " oml-connection-state ", status); |
| mtc.stop; |
| } |
| } |
| } |
| |
| /* global altstep for global guard timer; also takes care of responding RESET witH RESET-ACK */ |
| altstep as_Tguard() runs on test_CT { |
| var BSSAP_N_UNITDATA_ind ud_ind; |
| [] T_guard.timeout { |
| setverdict(fail, "Timeout of T_guard"); |
| mtc.stop; |
| } |
| /* always respond with RESET ACK to RESET */ |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(?, ?, tr_BSSMAP_Reset(g_osmux_enabled))) -> value ud_ind { |
| BSSAP.send(ts_BSSAP_UNITDATA_req(ud_ind.callingAddress, ud_ind.calledAddress, |
| ts_BSSMAP_ResetAck(g_osmux_enabled))); |
| repeat; |
| } |
| } |
| |
| altstep no_bssmap_reset() runs on test_CT { |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(?, ?, tr_BSSMAP_Reset(g_osmux_enabled))) { |
| setverdict(fail, "unexpected BSSMAP Reset"); |
| mtc.stop; |
| } |
| } |
| |
| function f_init_mgcp(charstring id) runs on test_CT { |
| id := id & "-MGCP"; |
| |
| var MGCPOps ops := { |
| create_cb := refers(MGCP_Emulation.ExpectedCreateCallback), |
| unitdata_cb := refers(MGCP_Emulation.DummyUnitdataCallback) |
| }; |
| var MGCP_conn_parameters mgcp_pars := { |
| callagent_ip := mp_bsc_ip, |
| callagent_udp_port := -1, |
| mgw_ip := mp_test_ip, |
| mgw_udp_port := 2427, |
| /* Enable it for SCCPlite, since we have 2 MGCP sockets towards MGW (UDP one + |
| the on with MGCP over IPA forwarded from MSC one) */ |
| multi_conn_mode := (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_SCCPlite_SERVER) |
| }; |
| |
| vc_MGCP := MGCP_Emulation_CT.create(id); |
| vc_MGCP.start(MGCP_Emulation.main(ops, mgcp_pars, id)); |
| } |
| |
| /* Enable or disable (current default) Osmux. When enabling, BSSMAP Reset |
| * contains extra IE (OsmuxSupport) and osmo-bsc will handle AssignReq with |
| * OsmuxCID IE. |
| */ |
| private function f_vty_allow_osmux(boolean allow) runs on test_CT { |
| f_vty_enter_cfg_msc(BSCVTY, 0); |
| if (allow) { |
| f_vty_transceive(BSCVTY, "osmux on"); |
| } else { |
| f_vty_transceive(BSCVTY, "osmux off"); |
| } |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| g_osmux_enabled := allow; |
| } |
| |
| function f_init_vty(charstring id := "foo") runs on test_CT { |
| if (BSCVTY.checkstate("Mapped")) { |
| /* skip initialization if already executed once */ |
| return; |
| } |
| map(self:BSCVTY, system:BSCVTY); |
| f_vty_set_prompts(BSCVTY); |
| f_vty_transceive(BSCVTY, "enable"); |
| f_cs7_inst_0_cfg(BSCVTY, {"sccp-timer ias " & int2str(g_bsc_sccp_timer_ias), |
| "sccp-timer iar " & int2str(g_bsc_sccp_timer_iar)}); |
| } |
| |
| private function f_logp(charstring log_msg) runs on MSC_ConnHdlr |
| { |
| // log on TTCN3 log output |
| log(log_msg); |
| // log in stderr log |
| f_vty_transceive(BSCVTY, "logp lglobal notice " & log_msg); |
| } |
| |
| private function f_sysinfo_seen(integer rsl_idx, RSL_Message rsl) runs on test_CT |
| { |
| if (rsl_idx >= lengthof(g_system_information)) { |
| g_system_information[rsl_idx] := SystemInformationConfig_omit |
| } |
| f_sysinfo_dec_raw(g_system_information[rsl_idx], rsl); |
| } |
| |
| altstep as_catch_RSL_sysinfo(integer rsl_idx) runs on test_CT { |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| |
| /* For handler_mode := false, receiving the RSL bootstrap messages directly on IPA_RSL */ |
| [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_NO_BCCH_INFO)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_NO_SACCH_FILL)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_SACCH_FILL)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| |
| /* For handler_mode := true, receiving the RSL bootstrap messages via RSL_Emulation */ |
| [] RSL_CCHAN[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_NO_BCCH_INFO)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] RSL_CCHAN[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] RSL_CCHAN[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_NO_SACCH_FILL)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| [] RSL_CCHAN[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_SACCH_FILL)) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| repeat; |
| } |
| } |
| |
| /* TODO: use BooleanList from COMMON/src/General_Types.ttcn */ |
| private type record of boolean my_BooleanList; |
| |
| private function f_vty_msc_allow_attach(TELNETasp_PT pt, my_BooleanList allow_attach_list) |
| { |
| var charstring config := f_vty_transceive_ret(pt, "show running-config"); |
| |
| for (var integer msc_nr := 0; msc_nr < sizeof(allow_attach_list); msc_nr := msc_nr+1) { |
| if (f_strstr(config, "\nmsc " & int2str(msc_nr) & "\n") < 0) { |
| /* There is no 'msc N' for this msc_nr in the running config, so don't create an empty msc by |
| * stepping into that config node. */ |
| log("msc ", msc_nr, " is not configured, skipping"); |
| continue; |
| } |
| f_vty_enter_cfg_msc(pt, msc_nr); |
| if (allow_attach_list[msc_nr]) { |
| /* strict := false: ignore if osmo-bsc does not support this config option (latest build) */ |
| f_vty_transceive(pt, "allow-attach", strict := false); |
| } else { |
| f_vty_transceive(pt, "no allow-attach", strict := false); |
| } |
| f_vty_transceive(pt, "exit"); |
| f_vty_transceive(pt, "exit"); |
| } |
| } |
| |
| /* global initialization function |
| * \param nr_bts Number of BTSs we should start/bring up |
| * \param handler_mode Start an RSL_Emulation_CT component (true) or not (false). |
| * \param nr_msc Number of virtual MSCs to bring up to connect to osmo-bsc. |
| */ |
| function f_init(integer nr_bts := NUM_BTS, boolean handler_mode := false, boolean allow_osmux := false, |
| integer nr_msc := 1, float guard_timeout := 30.0) runs on test_CT { |
| var integer bssap_idx; |
| |
| if (g_initialized) { |
| return; |
| } |
| g_initialized := true; |
| |
| T_guard.start(guard_timeout); |
| activate(as_Tguard()); |
| |
| f_init_vty("VirtMSC"); |
| if (mp_enable_osmux_test) { |
| f_vty_allow_osmux(allow_osmux); |
| } |
| |
| var my_BooleanList allow_attach := { false, false, false }; |
| f_init_statsd("VirtMSC", vc_STATSD, mp_test_ip, mp_bsc_statsd_port); |
| |
| for (bssap_idx := 0; bssap_idx < nr_msc; bssap_idx := bssap_idx+1) { |
| allow_attach[bssap_idx] := true; |
| /* Call a function of our 'parent component' RAN_Adapter_CT to start the |
| * MSC-side BSSAP emulation */ |
| if (handler_mode) { |
| var RanOps ranops := MSC_RanOps; |
| ranops.use_osmux := g_osmux_enabled; |
| f_ran_adapter_init(g_bssap[bssap_idx], mp_bssap_cfg[bssap_idx], "VirtMSC", ranops); |
| connect(self:SCCPLITE_IPA_CTRL, g_bssap[bssap_idx].vc_RAN:CTRL_CLIENT); |
| f_ran_adapter_start(g_bssap[bssap_idx]); |
| } else { |
| f_ran_adapter_init(g_bssap[bssap_idx], mp_bssap_cfg[bssap_idx], "VirtMSC", omit); |
| connect(self:BSSAP, g_bssap[bssap_idx].vc_SCCP:SCCP_SP_PORT); |
| f_ran_adapter_start(g_bssap[bssap_idx]); |
| f_legacy_bssap_reset(); |
| } |
| } |
| |
| /* start the test with exactly all enabled MSCs allowed to attach */ |
| f_vty_msc_allow_attach(BSCVTY, allow_attach); |
| |
| f_ipa_ctrl_start(mp_bsc_ip, mp_bsc_ctrl_port); |
| |
| f_init_mgcp("VirtMSC"); |
| |
| for (var integer i := 0; i < nr_bts; i := i+1) { |
| f_init_bts(i, handler_mode); |
| } |
| } |
| |
| function f_init_bts(integer bts_idx := 0, boolean handler_mode := false) |
| runs on test_CT { |
| /* wait until osmo-bts-omldummy has respawned */ |
| f_wait_oml(bts_idx, "degraded", 5.0); |
| |
| /* start RSL connection */ |
| f_ipa_rsl_start(bts[bts_idx].rsl, mp_bsc_ip, mp_bsc_rsl_port, bts_idx, handler_mode); |
| /* wait until BSC tells us "connected" */ |
| f_wait_oml(bts_idx, "connected", 5.0); |
| } |
| |
| function f_init_bts_and_check_sysinfo(integer bts_idx := 0, boolean handler_mode := false, |
| template SystemInformationConfig expect_si) |
| runs on test_CT { |
| var default sysinfo := activate(as_catch_RSL_sysinfo(bts_idx)); |
| |
| f_init_bts(bts_idx, handler_mode); |
| |
| /* Give some time to (hopefully/most likely) collect all system informations from RSL startup. |
| * We could stop as soon as all expected SI are received, but then we might miss SI that we don't expect and |
| * that might be sent afterwards. So rather give a generous timeout and be quite sure to catch all SI. |
| */ |
| f_sleep(5.0); |
| log("RSL ", bts_idx, " SYSTEM INFORMATION: ", g_system_information[bts_idx]); |
| |
| deactivate(sysinfo); |
| |
| if (match(g_system_information[bts_idx], expect_si)) { |
| setverdict(pass); |
| } else { |
| log("RSL ", bts_idx, ": EXPECTED SI: ", expect_si); |
| log("RSL ", bts_idx, ": GOT SI: ", g_system_information[bts_idx]); |
| setverdict(fail, "received SI does not match expectations"); |
| return; |
| } |
| } |
| |
| /* expect to receive a RSL message matching a specified template on a given BTS / stream */ |
| function f_exp_ipa_rx(integer bts_nr, template (present) RSL_Message t_rx, float t_secs := 2.0, IpaStreamId sid := IPAC_PROTO_RSL_TRX0) |
| runs on test_CT return RSL_Message { |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| timer T := t_secs; |
| |
| T.start; |
| alt { |
| [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(t_rx, sid)) -> value rx_rsl_ud { |
| T.stop; |
| } |
| [] IPA_RSL[bts_nr].receive { repeat; } |
| [] T.timeout { |
| setverdict(fail, "Timeout expecting ", t_rx); |
| mtc.stop; |
| } |
| } |
| return rx_rsl_ud.rsl; |
| } |
| |
| /* helper function to transmit RSL on a given BTS/stream */ |
| function f_ipa_tx(integer bts_nr, template (value) RSL_Message t_tx, IpaStreamId sid := IPAC_PROTO_RSL_TRX0) |
| runs on test_CT { |
| IPA_RSL[bts_nr].send(ts_ASP_RSL_UD(t_tx, sid)); |
| } |
| |
| |
| /* verify we get a CHAN_ACT after CHAN RQD */ |
| testcase TC_chan_act_noreply() runs on test_CT { |
| var BSSAP_N_UNITDATA_ind ud_ind; |
| var RSL_Message rsl_unused; |
| |
| f_init(1); |
| |
| IPA_RSL[0].send(ts_ASP_RSL_UD(ts_RSL_CHAN_RQD('23'O, 23))); |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| setverdict(pass); |
| } |
| |
| /* verify if the "chreq:total" counter increments as expected */ |
| testcase TC_chan_act_counter() runs on test_CT { |
| var BSSAP_N_UNITDATA_ind ud_ind; |
| var integer chreq_total; |
| var RSL_Message rsl_unused; |
| |
| f_init(1); |
| |
| chreq_total := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total"); |
| IPA_RSL[0].send(ts_ASP_RSL_UD(ts_RSL_CHAN_RQD('23'O, 23))); |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", chreq_total+1); |
| |
| setverdict(pass); |
| } |
| |
| /* CHAN RQD -> CHAN ACT -> CHAN ACT ACK -> RF CHAN REL */ |
| private function f_TC_chan_act_ack_noest(OCT1 ra := '23'O) runs on test_CT { |
| var RSL_Message rx_rsl; |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| var RslChannelNr chan_nr := f_chreq_act_ack(ra); |
| |
| /* expect BSC to disable the channel again if there's no RLL EST IND */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), T3101_MAX); |
| |
| setverdict(pass); |
| } |
| |
| /* Normal variant */ |
| testcase TC_chan_act_ack_noest() runs on test_CT { |
| f_init(1); |
| f_TC_chan_act_ack_noest(); |
| } |
| |
| /* Emergency call variant */ |
| testcase TC_chan_act_ack_noest_emerg() runs on test_CT { |
| /* See also: 3GPP TS 04.08, Table 9.9, ra=101xxxxx */ |
| f_init(1); |
| f_vty_allow_emerg_bts(true, 0); |
| f_TC_chan_act_ack_noest(ra := 'A5'O); |
| } |
| |
| /* Emergency call variant, but emergency calls are not allowed */ |
| testcase TC_chan_rqd_emerg_deny() runs on test_CT { |
| /* See also: 3GPP TS 04.08, Table 9.9, ra=101xxxxx */ |
| |
| var RSL_Message rx_rsl; |
| var GsmRrMessage rr; |
| |
| f_init(1); |
| f_vty_allow_emerg_bts(false, 0); |
| |
| IPA_RSL[0].clear; |
| f_ipa_tx(0, ts_RSL_CHAN_RQD('A5'O, 23)); |
| |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeC(RSL_MT_IMMEDIATE_ASSIGN_CMD)); |
| rr := dec_GsmRrMessage(rx_rsl.ies[1].body.full_imm_ass_info.payload); |
| if (rr.header.message_type == IMMEDIATE_ASSIGNMENT_REJECT) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, "immediate assignment not rejected"); |
| } |
| } |
| |
| /* Test behavior if MSC never answers to CR */ |
| testcase TC_chan_act_ack_est_ind_noreply() runs on test_CT { |
| var RslLinkId main_dcch := valueof(ts_RslLinkID_DCCH(0)); |
| var IpaStreamId sid := IPAC_PROTO_RSL_TRX0; |
| var RSL_Message rx_rsl; |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| |
| f_init(1); |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| var RslChannelNr chan_nr := f_chreq_act_ack(); |
| |
| var octetstring l3 := '00010203040506'O |
| f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))); |
| |
| /* expect BSC to disable the channel again if there's no response from MSC */ |
| /* MS waits 20s (T3210) at LU; 10s (T3230) at CM SERV REQ and 5s (T3220) AT detach */ |
| f_expect_chan_rel(0, chan_nr, expect_rll_rel_req := false); |
| setverdict(pass); |
| } |
| |
| /* Test behavior if MSC answers with CREF to CR */ |
| testcase TC_chan_act_ack_est_ind_refused() runs on test_CT { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var RSL_Message rx_rsl; |
| |
| f_init(1); |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| var RslChannelNr chan_nr := f_chreq_act_ack(); |
| |
| var octetstring l3 := '00010203040506'O |
| f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| BSSAP.send(ts_BSSAP_DISC_req(rx_c_ind.connectionId, 0)); |
| |
| /* expect BSC to disable the channel */ |
| f_expect_chan_rel(0, chan_nr, expect_rll_rel_req := false); |
| setverdict(pass); |
| } |
| |
| /* CHAN RQD -> CHAN ACT -> CHAN ACT NACK -> RF CHAN REL */ |
| testcase TC_chan_act_nack() runs on test_CT { |
| var RSL_Message rx_rsl; |
| var integer chact_nack; |
| |
| f_init(1); |
| |
| chact_nack := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chan_act:nack"); |
| |
| f_ipa_tx(0, ts_RSL_CHAN_RQD('33'O, 33)); |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| var RslChannelNr chan_nr := rx_rsl.ies[0].body.chan_nr; |
| |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_NACK(chan_nr, RSL_ERR_EQUIPMENT_FAIL)); |
| |
| /* wait for some time to hope the NACK arrives before the CTRL GET below */ |
| f_sleep(0.5); |
| |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chan_act:nack", chact_nack+1); |
| |
| setverdict(pass); |
| } |
| |
| /* Test for channel exhaustion due to RACH overload */ |
| testcase TC_chan_exhaustion() runs on test_CT { |
| var ASP_RSL_Unitdata rsl_ud; |
| var integer i; |
| var integer chreq_total, chreq_nochan; |
| |
| f_init(1); |
| |
| chreq_total := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total"); |
| chreq_nochan := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:no_channel"); |
| |
| /* GSM 04.08 Table 9.9a: |
| * RA = '33'O -> Establishment cause = 0011xxxx (MS dual rate capable and asks for "TCH/H or TCH/F"). |
| * With current setup, expect 4xSDCCH + 4xTCH/F + 1xTCH/H to succeed */ |
| for (i := 0; i < NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS; i := i+1) { |
| var RslChannelNr chan_nr := f_chreq_act_ack('33'O, i); |
| } |
| |
| IPA_RSL[0].clear; |
| |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", |
| chreq_total + NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS); |
| |
| /* now expect additional channel activations to fail */ |
| f_ipa_tx(0, ts_RSL_CHAN_RQD('42'O, 42)); |
| |
| alt { |
| [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV))) { |
| setverdict(fail, "Received CHAN ACT ACK without resources?!?"); |
| } |
| [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_IMM_ASSIGN(?))) -> value rsl_ud { |
| var GsmRrMessage rr; |
| /* match on IMM ASS REJ */ |
| rr := dec_GsmRrMessage(rsl_ud.rsl.ies[1].body.full_imm_ass_info.payload); |
| if (rr.header.message_type == IMMEDIATE_ASSIGNMENT_REJECT) { |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", |
| chreq_total + NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS+1); |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:no_channel", |
| chreq_nochan+1); |
| setverdict(pass); |
| } else { |
| repeat; |
| } |
| } |
| [] IPA_RSL[0].receive { repeat; } |
| } |
| } |
| |
| /* Test channel deactivation due to silence from MS */ |
| testcase TC_chan_deact_silence() runs on test_CT { |
| var RslChannelNr chan_nr; |
| |
| f_init(1); |
| |
| /* Request for a dedicated channel */ |
| chan_nr := f_chreq_act_ack('23'O); |
| |
| /* Wait some time until the channel is released */ |
| f_sleep(2.0); |
| |
| /* Expect CHANnel RELease */ |
| alt { |
| [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL))) { |
| log("Received CHANnel RELease"); |
| setverdict(pass); |
| } |
| [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_IMM_ASSIGN(?))) { |
| /* See OS#3709, OsmoBSC should not send Immediate |
| * Assignment Reject since a dedicated channel was |
| * already allocated, and Immediate Assignment was |
| * already sent. */ |
| setverdict(fail, "Unexpected Immediate Assignment!"); |
| } |
| [] IPA_RSL[0].receive { |
| setverdict(fail, "Unexpected RSL message!"); |
| } |
| } |
| } |
| |
| /*********************************************************************** |
| * Assignment Testing |
| ***********************************************************************/ |
| |
| /* Verify that the BSC refuses any BSSAP connection from the MSC (They are all BSC->MSC direction, |
| * except for the inter-BSC handover, MT side) */ |
| testcase TC_outbound_connect(integer bssap_idx := 0) runs on test_CT { |
| f_init(1); |
| |
| BSSAP.send(ts_BSSAP_CONNECT_req(g_bssap[bssap_idx].sccp_addr_peer, g_bssap[bssap_idx].sccp_addr_own, |
| 2342, ts_BSSMAP_AssignmentReq)); |
| BSSAP.receive(tr_BSSAP_DISC_ind(2342, ?, ?)); |
| setverdict(pass); |
| } |
| |
| /* Test behavior if MSC answers with CREF to CR */ |
| testcase TC_assignment_cic_only(integer bssap_idx := 0) runs on test_CT { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00000000'O); |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| /* send assignment without AoIP IEs */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_AssignmentReq(ts_BSSMAP_IE_CIC(0, 1)))); |
| } else { |
| /* Send assignmetn without CIC in IPA case */ |
| var BSSMAP_IE_AoIP_TransportLayerAddress tla := |
| valueof(ts_BSSMAP_IE_AoIP_TLA4('01020304'O, 2342)); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_AssignmentReq(omit, tla))); |
| } |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentComplete)) { |
| setverdict(fail, "AoIP BSC cannot accept ASSIGNMENT without AoIP Transport IE"); |
| } |
| /* TODO: Actually expect GSM0808_CAUSE_REQ_A_IF_TYPE_NOT_SUPP */ |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentFail)) { |
| setverdict(pass); |
| } |
| [] BSSAP.receive { repeat; } |
| } |
| } |
| |
| /* generate an assignment request for either AoIP or SCCPlite */ |
| function f_gen_ass_req(boolean osmux_enabled := false, integer bssap_idx := 0) return PDU_BSSAP { |
| var PDU_BSSAP ass_cmd; |
| var BSSMAP_IE_Osmo_OsmuxCID osmux_cid := valueof(ts_OsmuxCID(0)); |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| var BSSMAP_IE_AoIP_TransportLayerAddress tla := |
| valueof(ts_BSSMAP_IE_AoIP_TLA4('01020304'O, 2342)); |
| if (osmux_enabled) { |
| ass_cmd := valueof(ts_BSSMAP_AssignmentReq(omit, tla, osmux_cid)); |
| } else { |
| ass_cmd := valueof(ts_BSSMAP_AssignmentReq(omit, tla)); |
| } |
| } else { |
| var BSSMAP_IE_CircuitIdentityCode cic := valueof(ts_BSSMAP_IE_CIC(0,1)); |
| ass_cmd := valueof(ts_BSSMAP_AssignmentReq(cic, omit)); |
| } |
| return ass_cmd; |
| } |
| |
| function f_gen_handover_req(integer bssap_idx := 0) return PDU_BSSAP { |
| var PDU_BSSAP ho_req; |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| var BSSMAP_IE_AoIP_TransportLayerAddress tla := |
| valueof(ts_BSSMAP_IE_AoIP_TLA4('01020304'O, 2342)); |
| ho_req := valueof(ts_BSSMAP_HandoverRequest(omit, tla)); |
| } else { |
| var BSSMAP_IE_CircuitIdentityCode cic := valueof(ts_BSSMAP_IE_CIC(0,1)); |
| ho_req := valueof(ts_BSSMAP_HandoverRequest(cic, omit)); |
| } |
| return ho_req; |
| } |
| |
| /* generate an assignment complete template for either AoIP or SCCPlite */ |
| function f_gen_exp_compl(boolean expect_osmux := false, integer bssap_idx := 0) return template PDU_BSSAP { |
| var template PDU_BSSAP exp_compl; |
| var BSSMAP_IE_Osmo_OsmuxCID osmux_cid := valueof(ts_OsmuxCID(0)); |
| if (mp_bssap_cfg[bssap_idx].transport == BSSAP_TRANSPORT_AoIP) { |
| if (expect_osmux) { |
| exp_compl := tr_BSSMAP_AssignmentComplete(omit, ?, osmux_cid); |
| } else { |
| exp_compl := tr_BSSMAP_AssignmentComplete(omit, ?, omit); |
| } |
| } else { |
| /* CIC is optional "*" as the MSC allocated it */ |
| exp_compl := tr_BSSMAP_AssignmentComplete(*, omit); |
| } |
| return exp_compl; |
| } |
| |
| /* Run everything required up to sending a caller-specified assignment command and expect response */ |
| function f_assignment_exp(PDU_BSSAP ass_cmd, template PDU_BSSAP exp, charstring fail_text) |
| runs on test_CT { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00000000'O); |
| /* send assignment without AoIP IEs */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ass_cmd)); |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentComplete)) { |
| if (ischosen(exp.pdu.bssmap.assignmentComplete)) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, fail_text); |
| } |
| } |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_AssignmentFail)) { |
| if (ischosen(exp.pdu.bssmap.assignmentFailure)) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, fail_text); |
| } |
| } |
| [] BSSAP.receive { repeat; } |
| } |
| } |
| testcase TC_assignment_csd() runs on test_CT { |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeCSD); |
| //exp_fail.pdu.bssmap.assignmentFailure.cause.causeValue := int2bit(enum2int(GSM0808_CAUSE_REQ_CODEC_TYPE_OR_CONFIG_UNAVAIL), 7); |
| f_assignment_exp(ass_cmd, exp_fail, "BSC accepted Assignment for CSD"); |
| } |
| |
| testcase TC_assignment_ctm() runs on test_CT { |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeCTM); |
| //exp_fail.pdu.bssmap.assignmentFailure.cause.causeValue := int2bit(enum2int(GSM0808_CAUSE_REQ_CODEC_TYPE_OR_CONFIG_UNAVAIL), 7); |
| f_assignment_exp(ass_cmd, exp_fail, "BSC accepted Assignment for Speech+CTM"); |
| } |
| |
| type record DchanTuple { |
| integer sccp_conn_id, |
| RslChannelNr rsl_chan_nr |
| } |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| private function f_chreq_act_ack(OCT1 ra := '23'O, GsmFrameNumber fn := 23) |
| runs on test_CT return RslChannelNr { |
| var RSL_Message rx_rsl; |
| f_ipa_tx(0, ts_RSL_CHAN_RQD(ra, fn)); |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| var RslChannelNr chan_nr := rx_rsl.ies[0].body.chan_nr; |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); |
| return chan_nr; |
| } |
| |
| /* helper function to establish a dedicated channel via BTS and MSC */ |
| function f_est_dchan(OCT1 ra, GsmFrameNumber fn, octetstring l3) |
| runs on test_CT return DchanTuple { |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var DchanTuple dt; |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| dt.rsl_chan_nr := f_chreq_act_ack(ra, fn); |
| |
| f_ipa_tx(0, ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; |
| dt.sccp_conn_id := rx_c_ind.connectionId; |
| BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); |
| |
| return dt; |
| } |
| |
| /* expect RF CAN REL from BTS, acknowledge it and clear the MSC side */ |
| private function f_exp_chan_rel_and_clear(DchanTuple dt, integer bts_nr := 0) runs on test_CT { |
| var RSL_Message rx_rsl; |
| /* expect BSC to disable the channel */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), T3101_MAX); |
| /* respond with CHAN REL ACK */ |
| f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); |
| |
| /* expect Clear Complete from BSC */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)); |
| |
| /* MSC disconnects as instructed. */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| /* Test behavior of channel release after unilateral RLL REL IND (DISC from MS) */ |
| testcase TC_chan_rel_rll_rel_ind() runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* simulate RLL REL IND */ |
| f_ipa_tx(0, ts_RSL_REL_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); |
| |
| /* expect Clear Request on MSC side */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_di; |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := bit2int(rx_di.userData.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect BSC to disable the channel */ |
| f_exp_chan_rel_and_clear(dt, 0); |
| |
| /* wait for SCCP emulation to do its job */ |
| f_sleep(1.0); |
| |
| setverdict(pass); |
| } |
| |
| /* Test behavior of channel release after CONN FAIL IND from BTS */ |
| testcase TC_chan_rel_conn_fail() runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* simulate CONN FAIL IND */ |
| f_ipa_tx(0, ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| /* TODO: different cause values? */ |
| |
| /* expect Clear Request from BSC */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_di; |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := bit2int(rx_di.userData.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect BSC to disable the channel */ |
| f_exp_chan_rel_and_clear(dt, 0); |
| |
| /* wait for SCCP emulation to do its job */ |
| f_sleep(1.0); |
| |
| setverdict(pass); |
| } |
| |
| /* Test behavior of early CONN FAIL IND from BTS (before EST IND!) */ |
| /* See also https://www.osmocom.org/issues/3182 */ |
| testcase TC_early_conn_fail() runs on test_CT { |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* BTS->BSC: Send CHAN RQD and wait for allocation; acknowledge it */ |
| dt.rsl_chan_nr := f_chreq_act_ack(f_rnd_octstring(1), 23); |
| |
| /* BTS->BSC: simulate CONN FAIL IND */ |
| f_ipa_tx(0, ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| |
| /* BTS->BSC: Expect RF channel release from BSC on Abis */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), 10.0); |
| |
| /* BTS<-BSC: respond with CHAN REL ACK */ |
| f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); |
| |
| setverdict(pass); |
| } |
| |
| /* Test behavior of late CONN FAIL IND from BTS (ater REL IND!) */ |
| /* See also https://www.osmocom.org/issues/3182 */ |
| testcase TC_late_conn_fail() runs on test_CT { |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* BSC<-MSC: Instruct BSC to clear connection */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(0))); |
| |
| /* BTS->BSC: expect BSC to deactivate SACCH */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_DEACT_SACCH(dt.rsl_chan_nr)); |
| |
| /* BTS->BSC: simulate a late CONN FAIL IND from BTS */ |
| f_ipa_tx(0, ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); |
| |
| /* BTS<-BSC: Expect RF channel release from BSC on Abis */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), 10.0); |
| /* BTS->BSC: respond with CHAN REL ACK */ |
| f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); |
| |
| /* BSC->MSC: expect Clear Complete from BSC */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)); |
| |
| /* BSC<-MSC: MSC disconnects as requested. */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| |
| setverdict(pass); |
| } |
| |
| function f_expect_chan_rel(integer bts_nr, RslChannelNr rsl_chan_nr, |
| boolean expect_deact_sacch := true, |
| boolean expect_rr_chan_rel := true, |
| boolean expect_rll_rel_req := true, |
| boolean handle_rll_rel := true, |
| boolean is_csfb := false, |
| template CellSelIndValue csfb_expect_cells := omit, |
| template RR_Cause expect_rr_cause := ? |
| ) runs on test_CT { |
| |
| var RslLinkId main_dcch := valueof(ts_RslLinkID_DCCH(0)); |
| var boolean got_deact_sacch := false; |
| var boolean got_rr_chan_rel := false; |
| var boolean got_rll_rel_req := false; |
| var ASP_RSL_Unitdata ud; |
| var RSL_IE_Body l3_ie; |
| var PDU_ML3_NW_MS l3; |
| var RR_Cause got_cause; |
| log("f_expect_chan_rel() expecting: expect_deact_sacch=", expect_deact_sacch, " expect_rr_chan_rel=", expect_rr_chan_rel, |
| " expect_rll_rel_req=", expect_rll_rel_req); |
| alt { |
| [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_DEACT_SACCH(rsl_chan_nr))) { |
| got_deact_sacch := true; |
| repeat; |
| } |
| [is_csfb] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_DATA_REQ(rsl_chan_nr, ?, decmatch tr_RRM_RR_RELEASE_CSFB))) -> value ud { |
| got_rr_chan_rel := true; |
| |
| if (f_rsl_find_ie(ud.rsl, RSL_IE_L3_INFO, l3_ie) == false) { |
| setverdict(fail, "cannot find L3"); |
| mtc.stop; |
| } |
| l3 := dec_PDU_ML3_NW_MS(l3_ie.l3_info.payload); |
| |
| if (not istemplatekind(csfb_expect_cells, "omit")) { |
| var CellSelIndValue cells := dec_CellSelIndValue( |
| l3.msgs.rrm.channelRelease.cellSelectionIndicator.cellSelectionIndicatorValue); |
| |
| log("GOT RR CHANNEL RELEASE CSFB CELLS: ", cells); |
| if (match(cells, csfb_expect_cells)) { |
| setverdict(pass); |
| } else { |
| log("EXPECTED CSFB CELLS: ", csfb_expect_cells); |
| setverdict(fail, "Received CSFB cells list on RR Channel Release does not match expectations"); |
| } |
| } |
| |
| if (not istemplatekind(expect_rr_cause, "omit")) { |
| int2enum(oct2int(l3.msgs.rrm.channelRelease.rRCause.valuePart), got_cause); |
| log("GOT CAUSE CODE: ", l3.msgs.rrm.channelRelease.rRCause.valuePart, " = ", got_cause); |
| if (match(got_cause, expect_rr_cause)) { |
| setverdict(pass); |
| } else { |
| log("EXPECTED CAUSE CODE: ", expect_rr_cause); |
| setverdict(fail, "Received RR Channel Release Cause code does not match expectations"); |
| } |
| } |
| repeat; |
| } |
| [not is_csfb] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_DATA_REQ(rsl_chan_nr, ?, decmatch tr_RRM_RR_RELEASE))) -> value ud { |
| got_rr_chan_rel := true; |
| |
| if (not istemplatekind(expect_rr_cause, "omit")) { |
| if (f_rsl_find_ie(ud.rsl, RSL_IE_L3_INFO, l3_ie) == false) { |
| setverdict(fail, "cannot find L3"); |
| mtc.stop; |
| } |
| l3 := dec_PDU_ML3_NW_MS(l3_ie.l3_info.payload); |
| |
| int2enum(oct2int(l3.msgs.rrm.channelRelease.rRCause.valuePart), got_cause); |
| log("GOT CAUSE CODE: ", l3.msgs.rrm.channelRelease.rRCause.valuePart, " = ", got_cause); |
| if (match(got_cause, expect_rr_cause)) { |
| setverdict(pass); |
| } else { |
| log("EXPECTED CAUSE CODE: ", expect_rr_cause); |
| setverdict(fail, "Received RR Channel Release Cause code does not match expectations"); |
| } |
| } |
| repeat; |
| } |
| [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_REL_REQ(rsl_chan_nr, ?))) { |
| got_rll_rel_req := true; |
| /* FIXME: Why are we getting this for LinkID SACCH? */ |
| if (handle_rll_rel) { |
| f_ipa_tx(0, ts_RSL_REL_CONF(rsl_chan_nr, main_dcch)); |
| } |
| repeat; |
| } |
| [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL))) { |
| /* respond with CHAN REL ACK */ |
| f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(rsl_chan_nr)); |
| } |
| /* ignore any user data */ |
| [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeR(?))) { |
| repeat; |
| } |
| } |
| |
| log("f_expect_chan_rel() summary: got_deact_sacch=", got_deact_sacch, " got_rr_chan_rel=", got_rr_chan_rel, |
| " got_rll_rel_req=", got_rll_rel_req); |
| |
| if (expect_deact_sacch != got_deact_sacch) { |
| setverdict(fail, "f_expect_chan_rel(): expect_deact_sacch=", expect_deact_sacch, " got_deact_sacch=", got_deact_sacch); |
| } |
| if (expect_rr_chan_rel != got_rr_chan_rel) { |
| setverdict(fail, "f_expect_chan_rel(): expect_rr_chan_rel=", expect_rr_chan_rel, " got_rr_chan_rel=", got_rr_chan_rel); |
| } |
| if (expect_rll_rel_req != got_rll_rel_req) { |
| setverdict(fail, "f_expect_chan_rel(): expect_rll_rel_req=", expect_rll_rel_req, " got_rll_rel_req=", got_rll_rel_req); |
| } |
| } |
| |
| /* Test behavior of channel release after hard Clear Command from MSC */ |
| testcase TC_chan_rel_hard_clear() runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect Clear Complete from BSC on A */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); |
| setverdict(pass); |
| } |
| |
| /* Test behavior of channel release after Clear Command with CSFB indicator from MSC */ |
| testcase TC_chan_rel_hard_clear_csfb() runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommandCSFB(cause))); |
| |
| /* expect Clear Complete from BSC on A */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false, is_csfb := true); |
| setverdict(pass); |
| } |
| |
| /* Test behavior of channel release after hard RLSD from MSC */ |
| testcase TC_chan_rel_hard_rlsd() runs on test_CT { |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); |
| setverdict(pass); |
| } |
| |
| /* Test behavior of channel release after hard RLSD from MSC and MS is not responding to RLL REL REQ */ |
| testcase TC_chan_rel_hard_rlsd_ms_dead() runs on test_CT { |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); |
| setverdict(pass); |
| } |
| |
| /* Test behavior of channel release after BSSMAP RESET from MSC */ |
| testcase TC_chan_rel_a_reset() runs on test_CT { |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* Clear the queue, it might still contain stuff like IMMEDIATE ASSIGN */ |
| IPA_RSL[0].clear; |
| |
| /* perform BSSAP RESET, expect RESET ACK and DISC.ind on connection */ |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[0].sccp_addr_peer, g_bssap[0].sccp_addr_own, ts_BSSMAP_Reset(0, g_osmux_enabled))); |
| interleave { |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(g_bssap[0].sccp_addr_own, g_bssap[0].sccp_addr_peer, tr_BSSMAP_ResetAck(g_osmux_enabled))) { } |
| [] BSSAP.receive(tr_BSSAP_DISC_ind(dt.sccp_conn_id, ?, ?)) { } |
| } |
| |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); |
| setverdict(pass); |
| } |
| |
| /* Verify T(iar) triggers and releases the channel */ |
| testcase TC_chan_rel_sccp_tiar_timeout() runs on test_CT { |
| var DchanTuple dt; |
| |
| /* Set T(iar) in BSC low enough that it will trigger before other side |
| has time to keep alive with a T(ias). Keep recommended ratio of |
| T(iar) >= T(ias)*2 */ |
| g_bsc_sccp_timer_ias := 2; |
| g_bsc_sccp_timer_iar := 5; |
| |
| f_init(1); |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); |
| setverdict(pass); |
| } |
| |
| private function f_tc_chan_rel_rr_cause(myBSSMAP_Cause clear_cmd_cause, template RR_Cause expect_rr_cause) |
| runs on test_CT |
| { |
| var DchanTuple dt; |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(enum2int(clear_cmd_cause)))); |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false, expect_rr_cause := expect_rr_cause); |
| setverdict(pass); |
| } |
| |
| /* Test that Clear Command cause codes affect the RR Channel Release cause code */ |
| testcase TC_chan_rel_rr_cause() runs on test_CT { |
| f_init(1); |
| |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_CALL_CONTROL, GSM48_RR_CAUSE_NORMAL); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_HANDOVER_SUCCESSFUL, GSM48_RR_CAUSE_NORMAL); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_PREEMPTION, GSM48_RR_CAUSE_PREMPTIVE_REL); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_RADIO_INTERFACE_MESSAGE_FAILURE, GSM48_RR_CAUSE_PROT_ERROR_UNSPC); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_RADIO_INTERFACE_FAILURE, GSM48_RR_CAUSE_ABNORMAL_UNSPEC); |
| f_tc_chan_rel_rr_cause(GSM0808_CAUSE_EQUIPMENT_FAILURE, GSM48_RR_CAUSE_ABNORMAL_UNSPEC); |
| } |
| |
| /* Test behavior if RSL EST IND for non-active channel */ |
| testcase TC_rll_est_ind_inact_lchan() runs on test_CT { |
| timer T := 2.0; |
| |
| f_init(1); |
| |
| var octetstring l3 := '00010203040506'O; |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(6)); |
| f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) { |
| setverdict(fail, "MSC received COMPL L3 for non-active lchan"); |
| } |
| [] BSSAP.receive {} |
| [] IPA_RSL[0].receive {} |
| [] T.timeout {} |
| } |
| |
| setverdict(pass); |
| } |
| |
| /* Test behavior if RSL EST IND for invalid SAPI */ |
| testcase TC_rll_est_ind_inval_sapi1() runs on test_CT { |
| var RslChannelNr chan_nr; |
| |
| f_init(1); |
| |
| chan_nr := f_chreq_act_ack() |
| |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(1)), l3)); |
| |
| timer T := 2.0; |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) { |
| setverdict(fail, "MSC received COMPL L3 for invalid SAPI 1"); |
| } |
| [] BSSAP.receive { repeat; } |
| [] IPA_RSL[0].receive { repeat; } |
| [] T.timeout {} |
| } |
| |
| setverdict(pass); |
| } |
| |
| /* Test behavior if RSL EST IND for invalid SAPI */ |
| testcase TC_rll_est_ind_inval_sapi3() runs on test_CT { |
| timer T := 2.0; |
| |
| f_init(1); |
| |
| var RslChannelNr chan_nr := f_chreq_act_ack(); |
| |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(3)), l3)); |
| |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) { |
| setverdict(fail, "MSC received COMPL L3 for invalid SAPI 3"); |
| } |
| [] BSSAP.receive { repeat; } |
| [] IPA_RSL[0].receive { repeat; } |
| [] T.timeout {} |
| } |
| |
| setverdict(pass); |
| } |
| |
| /* Test behavior if RSL EST IND for invalid SACCH */ |
| testcase TC_rll_est_ind_inval_sacch() runs on test_CT { |
| timer T := 2.0; |
| |
| f_init(1); |
| |
| var RslChannelNr chan_nr := f_chreq_act_ack(); |
| |
| var octetstring l3 := '00010203040506'O; |
| f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_SACCH(0)), l3)); |
| |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) { |
| setverdict(fail, "MSC received COMPL L3 for invalid Link SACCH"); |
| } |
| [] BSSAP.receive { repeat; } |
| [] IPA_RSL[0].receive { repeat; } |
| [] T.timeout {} |
| } |
| |
| setverdict(pass); |
| } |
| |
| private function f_exp_sapi_n_reject(template (present) GsmSapi sapi := ?, |
| template myBSSMAP_Cause cause := ?, |
| float T_val := 2.0) |
| runs on test_CT { |
| var BSSAP_N_DATA_ind rx_di; |
| timer T; |
| |
| var template BSSMAP_IE_Cause tr_cause := tr_BSSMAP_IE_Cause(cause); |
| var template PDU_BSSAP tr_pdu := tr_BSSMAP_SAPInReject(sapi); |
| |
| T.start(T_val); |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DATA_ind(?, tr_pdu)) -> value rx_di { |
| var BSSMAP_IE_Cause rx_cause := rx_di.userData.pdu.bssmap.sAPInReject.cause; |
| if (not match(rx_cause, tr_cause)) { |
| setverdict(fail, "Rx unexpected Cause IE: ", |
| rx_cause, " vs expected ", tr_cause); |
| } |
| setverdict(pass); |
| } |
| [] BSSAP.receive(BSSAP_N_DATA_ind:?) -> value rx_di { |
| setverdict(fail, "Rx unexpected BSSAP PDU: ", rx_di); |
| } |
| [] T.timeout { |
| setverdict(fail, "Timeout waiting for BSSMAP SAPI N Reject"); |
| } |
| } |
| } |
| |
| /* Check if we get SAPI N Reject on receipt of unexpected RLL RELease INDication */ |
| testcase TC_rll_rel_ind_sapi_n_reject() runs on test_CT { |
| var octetstring rnd_data := f_rnd_octstring(16); |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* MS establishes a SAPI=0 link on DCCH */ |
| dt := f_est_dchan(f_rnd_ra_cs(), 23, rnd_data); |
| |
| /* MSC sends some data on (not yet established) SAPI=3 link */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); |
| /* BSC attempts to establish a SAPI=3 link on DCCH */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); |
| |
| /* MS sends unexpected RELease INDication on SAPI=3 */ |
| f_ipa_tx(0, ts_RSL_REL_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3))); |
| /* We expect to receive BSSMAP SAPI N Reject message from the BSC */ |
| f_exp_sapi_n_reject(3, GSM0808_CAUSE_MS_NOT_EQUIPPED); |
| |
| /* Clean up the connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); |
| |
| setverdict(pass); |
| } |
| |
| /* Check if we get SAPI N Reject on receipt of unexpected RLL ERROR INDication */ |
| testcase TC_rll_err_ind_sapi_n_reject() runs on test_CT { |
| var octetstring rnd_data := f_rnd_octstring(16); |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* MS establishes a SAPI=0 link on DCCH */ |
| dt := f_est_dchan(f_rnd_ra_cs(), 23, rnd_data); |
| |
| /* MSC sends some data on (not yet established) SAPI=3 link */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); |
| /* BSC attempts to establish a SAPI=3 link on DCCH */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); |
| |
| /* BTS sends unexpected ERROR INDication on SAPI=3 */ |
| f_ipa_tx(0, ts_RSL_ERROR_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3), ''O)); |
| /* We expect to receive BSSMAP SAPI N Reject message from the BSC */ |
| f_exp_sapi_n_reject(3, GSM0808_CAUSE_BSS_NOT_EQUIPPED); |
| |
| /* Clean up the connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); |
| |
| setverdict(pass); |
| } |
| |
| /* Check if we get SAPI N Reject due to a SAPI=3 link establishment timeout */ |
| testcase TC_rll_timeout_sapi_n_reject() runs on test_CT { |
| var octetstring rnd_data := f_rnd_octstring(16); |
| var RSL_Message rx_rsl; |
| var DchanTuple dt; |
| |
| f_init(1); |
| |
| /* MS establishes a SAPI=0 link on DCCH */ |
| dt := f_est_dchan(f_rnd_ra_cs(), 23, rnd_data); |
| |
| /* MSC sends some data on (not yet established) SAPI=3 link */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); |
| /* BSC attempts to establish a SAPI=3 link on DCCH */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); |
| |
| /* MS does not respond, so the link establishment timeout triggers SAPI N Reject */ |
| f_exp_sapi_n_reject(3, GSM0808_CAUSE_BSS_NOT_EQUIPPED, T_val := 8.0); |
| |
| /* Clean up the connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); |
| |
| setverdict(pass); |
| } |
| |
| testcase TC_si_default() runs on test_CT { |
| f_init(0); |
| f_init_bts_and_check_sysinfo(0, expect_si := SystemInformationConfig_default); |
| } |
| |
| /* We're testing SI2quater with lists of EARFCNs. Instead of just incrementing EARFCNs, also pick some from the edges of |
| * the entire value range. This function provides the same EARFCN numbers for the same earfcn_index */ |
| private function f_test_si2quater_earfcn_by_idx(integer earfcn_index) return uint16_t |
| { |
| select (earfcn_index) { |
| case (0) { |
| /* E-ARFCN 111 is already added in the osmo-bsc.cfg */ |
| return 111; |
| } |
| case (1) { |
| return 1; |
| } |
| case (2) { |
| return 0; |
| } |
| case (3) { |
| return 65535; |
| } |
| case else { |
| return 23 * (earfcn_index - 3); |
| } |
| } |
| } |
| |
| function f_test_si2quater(integer total_earfcns, template SystemInformationConfig expect_si, |
| template CellSelIndValue expect_cells := omit) runs on test_CT { |
| |
| f_init(0); |
| |
| /* E-ARFCN 111 is already added in the osmo-bsc.cfg, so only add more arfcns if total_earfcns > 1 */ |
| for (var integer i := 1; i < total_earfcns; i := i + 1) { |
| f_bts_0_cfg(BSCVTY, {"si2quater neighbor-list add earfcn " & int2str(f_test_si2quater_earfcn_by_idx(i)) |
| & " thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3"}); |
| } |
| |
| f_init_bts_and_check_sysinfo(0, expect_si := expect_si); |
| |
| f_init(1); |
| |
| if (not istemplatekind(expect_cells, "omit")) { |
| /* Also check that RR Channel Release contains these EARFCNs. |
| * (copied code from TC_chan_rel_hard_clear_csfb) */ |
| var BSSAP_N_DATA_ind rx_di; |
| var DchanTuple dt; |
| |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := 0; |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommandCSFB(cause))); |
| |
| /* expect Clear Complete from BSC on A */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)) { |
| /* release the SCCP connection */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false, is_csfb := true, |
| csfb_expect_cells := expect_cells); |
| } |
| |
| for (var integer i := 1; i < total_earfcns; i := i + 1) { |
| f_bts_0_cfg(BSCVTY, {"si2quater neighbor-list del earfcn " & int2str(f_test_si2quater_earfcn_by_idx(i))}); |
| } |
| } |
| |
| private function f_tr_si2quater_earfcns(integer count) return template SI2quaterRestOctetsList |
| { |
| var template SI2quaterRestOctetsList si2quater := {}; |
| var integer si2quater_count := (count + 2) / 3; |
| |
| for (var integer i := 0; i < count; i := i + 1) { |
| var integer earfcn := f_test_si2quater_earfcn_by_idx(i); |
| var integer index := i / 3; |
| var integer earfcn_index := i mod 3; |
| if (index >= lengthof(si2quater)) { |
| si2quater[index] := tr_SI2quaterRestOctets_EUTRAN(index := index, count := si2quater_count - 1); |
| } |
| si2quater[index].rel_additions.rel5.rel6.rel7.rel8.prio_eutran_params_desc.desc.eutran_params_desc.desc.repeated_neigh_cells[0].cell_desc_list[earfcn_index] := tr_EUTRAN_CellDesc_default(e_arfcn := earfcn); |
| } |
| |
| return si2quater; |
| } |
| |
| private function f_tr_rr_chan_rel_earfcns(integer count) return template CellSelIndValue |
| { |
| var template CellSelIndValue_EUTRAN_Descrs cells := {}; |
| |
| for (var integer i := 0; i < count; i := i + 1) { |
| var integer earfcn := f_test_si2quater_earfcn_by_idx(i); |
| cells[i] := tr_CellSelIndValue_EUTRAN_Descr(earfcn, meas_bw_presence := '0'B, meas_bw := omit); |
| } |
| |
| return tr_CellSelIndValue_EUTRAN(cells); |
| } |
| |
| private function f_tc_si2quater_n_earfcns(integer n) runs on test_CT |
| { |
| var template SystemInformationConfig sic := SystemInformationConfig_default; |
| sic.si2quater := f_tr_si2quater_earfcns(n); |
| var template CellSelIndValue cells := f_tr_rr_chan_rel_earfcns(n); |
| f_test_si2quater(n, sic, cells); |
| } |
| |
| testcase TC_si2quater_2_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(2); |
| } |
| |
| testcase TC_si2quater_3_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(3); |
| } |
| |
| testcase TC_si2quater_4_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(4); |
| } |
| |
| testcase TC_si2quater_5_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(5); |
| } |
| |
| testcase TC_si2quater_6_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(6); |
| } |
| |
| testcase TC_si2quater_12_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(12); |
| } |
| |
| testcase TC_si2quater_23_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(23); |
| } |
| |
| testcase TC_si2quater_32_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(32); |
| } |
| |
| testcase TC_si2quater_33_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(33); |
| } |
| |
| testcase TC_si2quater_42_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(42); |
| } |
| |
| testcase TC_si2quater_48_earfcns() runs on test_CT { |
| f_tc_si2quater_n_earfcns(48); |
| } |
| |
| /* verify the VTY error response when adding too many EARFCNs, and showing that osmo-bsc still sends 16 SI2quater with |
| * 48 EARFCNs. */ |
| testcase TC_si2quater_49_earfcns() runs on test_CT { |
| var template SystemInformationConfig sic := SystemInformationConfig_default; |
| sic.si2quater := f_tr_si2quater_earfcns(48); /* 48, not 49! */ |
| f_init(0); |
| |
| for (var integer i := 1; i < 48; i := i + 1) { |
| f_bts_0_cfg(BSCVTY, {"si2quater neighbor-list add earfcn " & int2str(f_test_si2quater_earfcn_by_idx(i)) |
| & " thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3"}); |
| } |
| |
| /* The 49th EARFCN no longer fits, expect VTY error */ |
| f_vty_enter_cfg_bts(BSCVTY, 0); |
| var charstring vty_error; |
| vty_error := f_vty_transceive_ret(BSCVTY, |
| "si2quater neighbor-list add earfcn 70 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3") |
| f_vty_transceive(BSCVTY, "end"); |
| |
| if (f_strstr(vty_error, "Unable to add ARFCN 70") >= 0) { |
| log("Got expected VTY error: ", vty_error); |
| setverdict(pass); |
| } else { |
| setverdict(fail, "Expected the 49th EUTRAN ARFCN to be rejected by vty config, got: ", vty_error); |
| } |
| |
| f_init_bts_and_check_sysinfo(0, expect_si := sic); |
| |
| for (var integer i := 1; i < 48; i := i + 1) { |
| f_bts_0_cfg(BSCVTY, {"si2quater neighbor-list del earfcn " & int2str(f_test_si2quater_earfcn_by_idx(i))}); |
| } |
| } |
| |
| private function f_acc09_count_allowed(AccessControlClass acc) return uint8_t |
| { |
| var uint8_t count := 0; |
| for (var integer i := 5; i < 16; i := i + 1) { |
| if (acc[i] == '0'B) { /* the list marks barred, we count allowed */ |
| count := count + 1; |
| } |
| } |
| return count; |
| } |
| |
| private function f_recv_next_si1(integer rsl_idx := 0) runs on test_CT return SystemInformationType1 |
| { |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| var SystemInformationType1 last_si1; |
| |
| timer T := 30.0; |
| T.start; |
| alt { |
| [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD((tr_RSL_NO_BCCH_INFO, |
| tr_RSL_BCCH_INFO, |
| tr_RSL_NO_SACCH_FILL, |
| tr_RSL_SACCH_FILL)) |
| ) -> value rx_rsl_ud { |
| f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); |
| if (g_system_information[rsl_idx].si1 == omit) { |
| repeat; |
| } |
| last_si1 := g_system_information[rsl_idx].si1; |
| g_system_information[rsl_idx].si1 := omit; |
| T.stop; |
| } |
| [] T.timeout { setverdict(fail, "Timeout receiving next SI1"); } |
| } |
| return last_si1; |
| } |
| |
| /* verify ACC rotate feature */ |
| testcase TC_si_acc_rotate() runs on test_CT { |
| var template SystemInformationConfig sic := SystemInformationConfig_default; |
| var SystemInformationType1 last_si1; |
| var AccessControlClass acc; |
| var uint8_t count; |
| var integer times_allowed[10] := { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| f_init(0, guard_timeout := 60.0); |
| |
| f_bts_0_cfg(BSCVTY, {"rach access-control-class 5 barred", |
| "access-control-class-rotate 3", |
| "access-control-class-rotate-quantum 1"}); |
| |
| /* Init and get first sysinfo */ |
| f_init_bts_and_check_sysinfo(0, expect_si := ?); |
| |
| for (var integer i:= 0; i < 20; i := i + 1) { |
| last_si1 := f_recv_next_si1(0); |
| acc := last_si1.rach_control.acc; |
| count := f_acc09_count_allowed(acc); |
| log("RSL: GOT SI1 ACC len=", count, ": ", acc); |
| |
| if (count != 3) { |
| log("RSL: EXPECTED SI ACC len=3"); |
| setverdict(fail, "received SI does not match expectations"); |
| break; |
| } |
| |
| for (var integer j := 0; j < 10; j := j + 1) { |
| if (acc[16 - 1 - j] == '0'B) { /* the list marks barred, we count allowed */ |
| times_allowed[j] := times_allowed[j] + 1; |
| } |
| } |
| } |
| |
| for (var integer j := 0; j < 10; j := j + 1) { |
| log("ACC", j, " allowed ", times_allowed[j], " times" ); |
| if (j != 5 and times_allowed[j] < 3) { |
| setverdict(fail, "ACC", j, " ERROR: allowed ", times_allowed[j], " < 1 times"); |
| } else if (j == 5 and times_allowed[j] > 0) { |
| setverdict(fail, "ACC", j, " ERROR: allowed ", times_allowed[j], " > 0 times"); |
| } |
| } |
| |
| f_bts_0_cfg(BSCVTY, {"access-control-class-rotate 10", |
| "rach access-control-class 5 allowed"}); |
| } |
| |
| /* verify ACC startup ramp+rotate feature */ |
| testcase TC_si_acc_ramp_rotate() runs on test_CT { |
| var template SystemInformationConfig sic := SystemInformationConfig_default; |
| var SystemInformationType1 last_si1; |
| var AccessControlClass acc; |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| var uint8_t count; |
| var uint8_t prev_count; |
| var integer times_allowed[10] := { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }; |
| |
| f_init(0, guard_timeout := 80.0); |
| |
| f_bts_0_cfg(BSCVTY, {"rach access-control-class 4 barred", |
| "access-control-class-rotate 0", |
| "access-control-class-rotate-quantum 1", |
| "access-control-class-ramping", |
| "access-control-class-ramping-step-interval 5", |
| "access-control-class-ramping-step-size 5"}); |
| |
| /* Init and get first sysinfo */ |
| f_init_bts_and_check_sysinfo(0, expect_si := ?); |
| last_si1 := g_system_information[0].si1; |
| acc := last_si1.rach_control.acc; |
| count := f_acc09_count_allowed(acc); |
| /* Adm subset size was set to 0 above, so wait until all ACC are barred */ |
| while (count > 0) { |
| last_si1 := f_recv_next_si1(0); |
| acc := last_si1.rach_control.acc; |
| count := f_acc09_count_allowed(acc); |
| log("RSL: wait len()=0: GOT SI1 ACC len=", count, ": ", acc); |
| } |
| |
| /* Increase adm subset size, we should see ramping start up */ |
| f_bts_0_cfg(BSCVTY, {"access-control-class-rotate 10"}); |
| prev_count := 0; |
| while (true) { |
| last_si1 := f_recv_next_si1(0); |
| acc := last_si1.rach_control.acc; |
| count := f_acc09_count_allowed(acc); |
| log("RSL: GOT SI1 ACC len=", count, ": ", acc); |
| |
| if (prev_count > count) { |
| setverdict(fail, "ACC allowed count dropped while expecting grow: ", prev_count, " -> ", count); |
| break; |
| } |
| |
| if (count == 9) { |
| break; /* Maximum reached (10 - 1 perm barred), done here */ |
| } |
| |
| prev_count := count; |
| } |
| |
| setverdict(pass); |
| |
| f_bts_0_cfg(BSCVTY, {"access-control-class-rotate 10", |
| "rach access-control-class 4 allowed", |
| "no access-control-class-ramping"}); |
| } |
| |
| testcase TC_ctrl_msc_connection_status() runs on test_CT { |
| var charstring ctrl_resp; |
| |
| f_init(1); |
| |
| /* See https://osmocom.org/issues/2729 */ |
| f_ctrl_get_exp(IPA_CTRL, "msc_connection_status", "connected"); |
| setverdict(pass); |
| } |
| |
| testcase TC_ctrl_msc0_connection_status() runs on test_CT { |
| var charstring ctrl_resp; |
| |
| f_init(1); |
| |
| f_ctrl_get_exp(IPA_CTRL, "msc.0.connection_status", "connected"); |
| setverdict(pass); |
| } |
| |
| testcase TC_ctrl() runs on test_CT { |
| var charstring ctrl_resp; |
| |
| f_init(1); |
| |
| /* all below values must match the osmo-bsc.cfg config file used */ |
| |
| f_ctrl_get_exp(IPA_CTRL, "mcc", "001"); |
| f_ctrl_get_exp(IPA_CTRL, "mnc", "01"); |
| f_ctrl_get_exp(IPA_CTRL, "number-of-bts", "4"); |
| |
| var integer bts_nr := 0; |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "location-area-code", "1"); |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "cell-identity", "0"); |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "oml-connection-state", "connected"); |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "gprs-mode", "gprs"); |
| f_ctrl_get_exp_bts(IPA_CTRL, bts_nr, "rf_state", "operational,unlocked,on"); |
| f_ctrl_get_exp_trx(IPA_CTRL, bts_nr, 0, "arfcn", "871"); |
| f_ctrl_get_exp_trx(IPA_CTRL, bts_nr, 0, "max-power-reduction", "20"); |
| |
| var integer uptime := str2int(f_ctrl_get_bts(IPA_CTRL, bts_nr, "oml-uptime")); |
| f_sleep(2.0); |
| if (str2int(f_ctrl_get_bts(IPA_CTRL, bts_nr, "oml-uptime")) < uptime+1) { |
| setverdict(fail, "oml-uptime not incrementing as expected"); |
| } |
| /* TODO: Disconnect RSL, imply that OML is disconnected and check for uptime zero? */ |
| |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bsc", 0, "paging:attempted", 0); |
| |
| setverdict(pass); |
| } |
| |
| /* Verify that Upon receival of SET "location", BSC forwards a TRAP |
| "location-state" over the SCCPlite IPA conn */ |
| testcase TC_ctrl_location() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var integer bts_nr := 0; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrl_set_bts(IPA_CTRL, bts_nr, "location", "1234567,fix3d,0.340000,0.560000,0.780000"); |
| f_ctrl_exp_trap(SCCPLITE_IPA_CTRL, "bts." & int2str(bts_nr) & ".location-state", |
| "1234567,fix3d,0.340000,0.560000,0.780000,operational,unlocked,on,001,01"); |
| |
| f_ctrl_set(SCCPLITE_IPA_CTRL, "rf_locked", "1"); |
| f_sleep(2.0); |
| |
| f_ctrl_set_bts(IPA_CTRL, bts_nr, "location", "1234888,fix3d,0.350000,0.570000,0.790000"); |
| f_ctrl_exp_trap(SCCPLITE_IPA_CTRL, "bts." & int2str(bts_nr) & ".location-state", |
| "1234888,fix3d,0.350000,0.570000,0.790000,operational,locked,off,001,01"); |
| |
| /* should match the one from config */ |
| f_ctrl_set(SCCPLITE_IPA_CTRL, "rf_locked", "0"); |
| |
| setverdict(pass); |
| } |
| |
| |
| /*********************************************************************** |
| * Paging Testing |
| ***********************************************************************/ |
| |
| type record Cell_Identity { |
| GsmMcc mcc, |
| GsmMnc mnc, |
| GsmLac lac, |
| GsmCellId ci |
| }; |
| private const Cell_Identity cid := { '001'H, '01'H, 1, 0 }; |
| private const Cell_Identity unknown_cid := { '678'H, 'f90'H, 1, 0 }; |
| |
| type set of integer BtsIdList; |
| |
| private function f_bts_in_list(integer bts_id, BtsIdList bts_ids) return boolean { |
| for (var integer j := 0; j < sizeof(bts_ids); j := j + 1) { |
| if (bts_id == bts_ids[j]) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /* core paging test helper function; used by most paging test cases */ |
| private function f_pageing_helper(hexstring imsi, |
| template BSSMAP_FIELD_CellIdentificationList cid_list, |
| BtsIdList bts_ids := { 0 }, |
| template RSL_ChanNeeded rsl_chneed := omit, |
| template (omit) OCT4 tmsi := omit) runs on test_CT |
| { |
| var template BSSMAP_IE_ChannelNeeded bssmap_chneed; |
| var template MobileIdentityV mi; |
| var RSL_Message rx_rsl; |
| var integer paging_group := hex2int(imsi[lengthof(imsi)-1]); |
| var integer i; |
| |
| f_init(); |
| |
| /* Clear the queue, it might still contain stuff like BCCH FILLING */ |
| for (i := 0; i < NUM_BTS; i := i + 1) { |
| IPA_RSL[i].clear; |
| } |
| |
| if (isvalue(rsl_chneed)) { |
| /* The values of 08.08 3.2.2.36 and 08.58 9.3.40 are luckily identical */ |
| bssmap_chneed := ts_BSSMAP_IE_ChanNeeded(int2bit(enum2int(valueof(rsl_chneed)),2)); |
| } else { |
| bssmap_chneed := omit; |
| } |
| |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[0].sccp_addr_peer, g_bssap[0].sccp_addr_own, |
| ts_BSSMAP_Paging(imsi, cid_list, tmsi, bssmap_chneed))); |
| |
| if (not istemplatekind(tmsi, "omit")) { |
| mi := t_MI_TMSI(tmsi); |
| } else { |
| mi := tr_MI_IMSI(imsi); |
| } |
| |
| for (i := 0; i < sizeof(bts_ids); i := i + 1) { |
| rx_rsl := f_exp_ipa_rx(bts_ids[i], tr_RSL_PAGING_CMD(mi)); |
| /* check channel type, paging group */ |
| if (rx_rsl.ies[1].body.paging_group != paging_group) { |
| setverdict(fail, "Paging for wrong paging group"); |
| } |
| if (ispresent(rsl_chneed) and |
| rx_rsl.ies[3].body.chan_needed.chan_needed != valueof(rsl_chneed)) { |
| setverdict(fail, "RSL Channel Needed != BSSMAP Channel Needed"); |
| } |
| } |
| f_sleep(2.0); |
| /* do a quick check on all not-included BTSs if they received paging */ |
| for (i := 0; i < NUM_BTS; i := i + 1) { |
| timer T := 0.1; |
| if (f_bts_in_list(i, bts_ids)) { |
| continue; |
| } |
| T.start; |
| alt { |
| [] IPA_RSL[i].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(mi))) { |
| setverdict(fail, "Paging on BTS ", i, " which is not part of ", bts_ids); |
| } |
| [] IPA_RSL[i].receive { repeat; } |
| [] T.timeout { } |
| } |
| } |
| |
| setverdict(pass); |
| } |
| |
| const BtsIdList c_BtsId_all := { 0, 1, 2 }; |
| const BtsIdList c_BtsId_none := { }; |
| const BtsIdList c_BtsId_LAC1 := { 0, 1 }; |
| const BtsIdList c_BtsId_LAC2 := { 2 }; |
| |
| /* PAGING by IMSI + TMSI */ |
| testcase TC_paging_imsi_nochan() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010100000001'H, cid_list, c_BtsId_all, omit, omit); |
| f_shutdown_helper(); |
| } |
| |
| /* PAGING by IMSI + TMSI */ |
| testcase TC_paging_tmsi_nochan() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010100000001'H, cid_list, c_BtsId_all, omit, 'A1B2C301'O); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging with different "channel needed' values */ |
| testcase TC_paging_tmsi_any() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010100000002'H, cid_list, c_BtsId_all, RSL_CHANNEED_ANY, 'A1B2C302'O); |
| f_shutdown_helper(); |
| } |
| testcase TC_paging_tmsi_sdcch() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010100000003'H, cid_list, c_BtsId_all, RSL_CHANNEED_SDCCH, 'A1B2C303'O); |
| f_shutdown_helper(); |
| } |
| testcase TC_paging_tmsi_tch_f() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010000000004'H, cid_list, c_BtsId_all, RSL_CHANNEED_TCH_F, 'A1B2C304'O); |
| f_shutdown_helper(); |
| } |
| testcase TC_paging_tmsi_tch_hf() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010000000005'H, cid_list, c_BtsId_all, RSL_CHANNEED_TCH_ForH, 'A1B2C305'O); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by CGI */ |
| testcase TC_paging_imsi_nochan_cgi() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_CGI := { ts_BSSMAP_CI_CGI(cid.mcc, cid.mnc, cid.lac, cid.ci) } }; |
| f_pageing_helper('001010000000006'H, cid_list, { 0 }); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by LAC+CI */ |
| testcase TC_paging_imsi_nochan_lac_ci() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC_CI := { ts_BSSMAP_CI_LAC_CI(cid.lac, cid.ci) } }; |
| f_pageing_helper('001010000000007'H, cid_list, { 0 }); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by CI */ |
| testcase TC_paging_imsi_nochan_ci() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_CI := { ts_BSSMAP_CI_CI(cid.ci) } }; |
| f_pageing_helper('001010000000008'H, cid_list, { 0 }); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by LAI */ |
| testcase TC_paging_imsi_nochan_lai() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAI := { ts_BSSMAP_CI_LAI(cid.mcc, cid.mnc, cid.lac) } }; |
| f_pageing_helper('001010000000009'H, cid_list, c_BtsId_LAC1); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by LAC */ |
| testcase TC_paging_imsi_nochan_lac() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC := { ts_BSSMAP_CI_LAC(cid.lac) } }; |
| f_pageing_helper('001010000000010'H, cid_list, c_BtsId_LAC1); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by "all in BSS" */ |
| testcase TC_paging_imsi_nochan_all() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_allInBSS := ''O }; |
| f_pageing_helper('001010000000011'H, cid_list, c_BtsId_all); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by PLMN+LAC+RNC; We do not implement this; Verify nothing is paged */ |
| testcase TC_paging_imsi_nochan_plmn_lac_rnc() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_PLMN_LAC_RNC := { ts_BSSMAP_CI_PLMN_LAC_RNC(cid.mcc, cid.mnc, cid.lac, 12) } }; |
| f_pageing_helper('001010000000012'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by RNC; We do not implement this; Verify nothing is paged */ |
| testcase TC_paging_imsi_nochan_rnc() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_RNC := { int2oct(13, 2) } }; |
| f_pageing_helper('001010000000013'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by LAC+RNC; We do not implement; Verify nothing is paged */ |
| testcase TC_paging_imsi_nochan_lac_rnc() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC_RNC := { ts_BSSMAP_CI_LAC_RNC(cid.lac, 14) } }; |
| f_pageing_helper('001010000000014'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging on multiple cells (multiple entries in list): Verify all of them page */ |
| testcase TC_paging_imsi_nochan_lacs() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC := { ts_BSSMAP_CI_LAC(1), ts_BSSMAP_CI_LAC(2) } }; |
| f_pageing_helper('001010000000015'H, cid_list, c_BtsId_all); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging on empty list: Verify none of them page */ |
| testcase TC_paging_imsi_nochan_lacs_empty() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_LAC := { } }; |
| f_pageing_helper('001010000000016'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Paging by CGI with unknown MCC/MNC: Verify nothing is paged. */ |
| testcase TC_paging_imsi_nochan_cgi_unknown_cid() runs on test_CT { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list; |
| cid_list := { cIl_CGI := { ts_BSSMAP_CI_CGI(unknown_cid.mcc, unknown_cid.mnc, unknown_cid.lac, unknown_cid.ci) } }; |
| f_pageing_helper('001010000000006'H, cid_list, c_BtsId_none); |
| f_shutdown_helper(); |
| } |
| |
| /* Verify paging retransmission interval + count */ |
| /* Verify paging stops after channel establishment */ |
| /* Test behavior under paging overload */ |
| |
| /* Verify PCH load */ |
| testcase TC_paging_imsi_load() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| timer T := 4.0; |
| timer T_retrans := 1.0; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010123456789'H, cid_list, c_BtsId_all); |
| |
| /* tell BSC there is no paging space anymore */ |
| f_ipa_tx(0, ts_RSL_PAGING_LOAD_IND(0)); |
| f_sleep(0.2); |
| IPA_RSL[0].clear; |
| |
| /* Wait for 4 seconds if any more PAGING CMD are received on RSL. Normally, |
| * there would be 8 retransmissions during 4 seconds */ |
| T.start; |
| T_retrans.start; |
| alt { |
| [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { |
| setverdict(fail, "Received PAGING after LOAD_IND(0)"); |
| mtc.stop; |
| } |
| [] T_retrans.timeout { |
| /* re-trnsmit the zero-space LOAD IND to avoid BSC 'auto credit' */ |
| f_ipa_tx(0, ts_RSL_PAGING_LOAD_IND(0)); |
| T_retrans.start; |
| repeat; |
| } |
| [] T.timeout { |
| setverdict(pass); |
| } |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify Paging Counter */ |
| testcase TC_paging_counter() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| timer T := 4.0; |
| var integer i; |
| var integer paging_attempted_bsc; |
| var integer paging_attempted_bts[NUM_BTS]; |
| var integer paging_expired_bts[NUM_BTS]; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| |
| f_init(); |
| |
| /* read counters before paging */ |
| paging_attempted_bsc := f_ctrl_get_ratectr_abs(IPA_CTRL, "bsc", 0, "paging:attempted"); |
| for (i := 0; i < NUM_BTS; i := i+1) { |
| paging_attempted_bts[i] := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", i, "paging:attempted"); |
| paging_expired_bts[i] := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", i, "paging:expired"); |
| } |
| |
| f_pageing_helper('001230000000001'H, cid_list, c_BtsId_all); |
| |
| /* expect the attempted pages on BSC and each BTSs to have incremented by one */ |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bsc", 0, "paging:attempted", paging_attempted_bsc+1); |
| for (i := 0; i < NUM_BTS; i := i+1) { |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", i, "paging:attempted", |
| paging_attempted_bts[i]+1); |
| } |
| |
| /* assume that 12s later the paging on all BTSs have expired and hence incremented by 1 */ |
| f_sleep(12.0); |
| for (i := 0; i < NUM_BTS; i := i+1) { |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", i, "paging:expired", |
| paging_expired_bts[i]+1); |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| |
| /* Verify paging stops after A-RESET */ |
| testcase TC_paging_imsi_a_reset() runs on test_CT { |
| var BSSMAP_FIELD_CellIdentificationList cid_list; |
| timer T := 3.0; |
| cid_list := valueof(ts_BSSMAP_CIL_noCell); |
| f_pageing_helper('001010123456789'H, cid_list, c_BtsId_all); |
| |
| /* Perform a BSSMAP Reset and wait for ACK */ |
| BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[0].sccp_addr_peer, g_bssap[0].sccp_addr_own, ts_BSSMAP_Reset(0, g_osmux_enabled))); |
| alt { |
| [] BSSAP.receive(tr_BSSAP_UNITDATA_ind(g_bssap[0].sccp_addr_own, g_bssap[0].sccp_addr_peer, tr_BSSMAP_ResetAck(g_osmux_enabled))) { } |
| [] BSSAP.receive { repeat; } |
| } |
| |
| /* Wait to avoid a possible race condition if a paging message is |
| * received right before the reset ACK. */ |
| f_sleep(0.2); |
| |
| /* Clear the queue, it might still contain stuff like BCCH FILLING */ |
| for (var integer i := 0; i < sizeof(IPA_RSL); i := i+1) { |
| IPA_RSL[i].clear; |
| } |
| |
| /* Wait for 3 seconds if any more PAGING CMD are received on RSL */ |
| T.start; |
| alt { |
| [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { |
| setverdict(fail, "Received PAGING after A-RESET"); |
| mtc.stop; |
| } |
| [] IPA_RSL[1].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { |
| setverdict(fail, "Received PAGING after A-RESET"); |
| mtc.stop; |
| } |
| [] IPA_RSL[2].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { |
| setverdict(fail, "Received PAGING after A-RESET"); |
| mtc.stop; |
| } |
| [] T.timeout { |
| setverdict(pass); |
| } |
| } |
| |
| f_shutdown_helper(); |
| } |
| |
| /* Verify how we handle unsolicited Paging Response. In case of an unsolicit |
| * paging response we can not know which MSC is in charge, so we will blindly |
| * pick the first configured MSC. This behavior is required in order to make |
| * MT-CSFB calls working because in those cases the BSC can not know that the |
| * MSC has already paged the subscriver via SGs. So any MT-CSFB call will look |
| * like an unsolicited Paging Response to the MSC. |
| */ |
| testcase TC_paging_resp_unsol() runs on test_CT { |
| |
| f_init(1); |
| timer T := 5.0; |
| |
| var BSSAP_N_CONNECT_ind rx_c_ind; |
| var DchanTuple dt; |
| var PDU_ML3_MS_NW l3 := valueof(ts_PAG_RESP(valueof(ts_MI_IMSI_LV('001010008880018'H)))); |
| var octetstring rr_pag_resp := enc_PDU_ML3_MS_NW(l3); |
| |
| /* Send CHAN RQD and wait for allocation; acknowledge it */ |
| dt.rsl_chan_nr := f_chreq_act_ack(); |
| |
| /* Send unsolicited Paging response (no matching Paging CMD stored in BSC) */ |
| f_ipa_tx(0, ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), enc_PDU_ML3_MS_NW(l3))); |
| |
| |
| /* Expevct a CR with a matching Paging response on the A-Interface */ |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(rr_pag_resp))) { |
| setverdict(pass); |
| } |
| [] BSSAP.receive { |
| setverdict(fail, "Received unexpected message on A-Interface!"); |
| } |
| [] T.timeout { |
| setverdict(fail, "Received nothing on A-Interface!"); |
| } |
| } |
| |
| setverdict(pass); |
| } |
| |
| /* Test RSL link drop causes counter increment */ |
| testcase TC_rsl_drop_counter() runs on test_CT { |
| var integer rsl_fail; |
| |
| f_init(1); |
| |
| rsl_fail := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "rsl_fail"); |
| |
| bts[0].rsl.vc_IPA.stop; |
| |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "rsl_fail", rsl_fail+1); |
| |
| setverdict(pass); |
| } |
| |
| /* TODO: Test OML link drop causes counter increment */ |
| |
| /* The body of TC_rsl_unknown_unit_id() and TC_oml_unknown_unit_id() tests. */ |
| function f_ipa_unknown_unit_id(integer mp_bsc_ipa_port) runs on test_CT return boolean { |
| timer T := 10.0; |
| |
| bts[0].rsl.id := "IPA-0-RSL"; |
| bts[0].rsl.vc_IPA := IPA_Emulation_CT.create(bts[0].rsl.id & "-IPA"); |
| bts[0].rsl.ccm_pars := c_IPA_default_ccm_pars; |
| bts[0].rsl.ccm_pars.name := "Osmocom TTCN-3 BTS Simulator"; |
| bts[0].rsl.ccm_pars.unit_id := "99/0/0"; /* value which is unknown at BTS */ |
| |
| f_ipa_ctrl_start(mp_bsc_ip, mp_bsc_ctrl_port); |
| |
| f_init_mgcp("VirtMSC"); |
| |
| /* start RSL/OML connection (XXX re-uses RSL port/protocol definitions for OML) */ |
| map(bts[0].rsl.vc_IPA:IPA_PORT, system:IPA); |
| connect(bts[0].rsl.vc_IPA:IPA_RSL_PORT, self:IPA_RSL[0]); |
| bts[0].rsl.vc_IPA.start(IPA_Emulation.main_client(mp_bsc_ip, mp_bsc_ipa_port, "", 10000, bts[0].rsl.ccm_pars)); |
| |
| /* wait for IPA OML link to connect and then disconnect */ |
| T.start; |
| alt { |
| [] IPA_RSL[0].receive(tr_ASP_IPA_EV(ASP_IPA_EVENT_DOWN)) { |
| T.stop; |
| return true; |
| } |
| [] IPA_RSL[0].receive { repeat } |
| [] T.timeout { |
| return false; |
| } |
| } |
| return false; |
| } |
| |
| /* BSC should close an RSL connection from a BTS with unknown unit ID (OS#2714). */ |
| testcase TC_rsl_unknown_unit_id() runs on test_CT { |
| if (f_ipa_unknown_unit_id(mp_bsc_rsl_port)) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, "Timeout RSL waiting for connection to close"); |
| } |
| } |
| |
| |
| /* BSC should close an RSL connection from a BTS with unknown unit ID (OS#2714). */ |
| testcase TC_oml_unknown_unit_id() runs on test_CT { |
| if (f_ipa_unknown_unit_id(mp_bsc_oml_port)) { |
| setverdict(pass); |
| } else { |
| setverdict(fail, "Timeout OML waiting for connection to close"); |
| } |
| } |
| |
| |
| /*********************************************************************** |
| * "New world" test cases using RSL_Emulation + RAN_Emulation |
| ***********************************************************************/ |
| |
| import from RAN_Emulation all; |
| import from RSL_Emulation all; |
| import from MSC_ConnectionHandler all; |
| |
| type function void_fn(charstring id) runs on MSC_ConnHdlr; |
| |
| /* helper function to create and connect a MSC_ConnHdlr component */ |
| private function f_connect_handler(inout MSC_ConnHdlr vc_conn, integer bssap_idx := 0) runs on test_CT { |
| connect(vc_conn:RAN, g_bssap[bssap_idx].vc_RAN:PROC); |
| connect(vc_conn:MGCP_PROC, vc_MGCP:MGCP_PROC); |
| connect(vc_conn:RSL, bts[0].rsl.vc_RSL:CLIENT_PT); |
| connect(vc_conn:RSL_PROC, bts[0].rsl.vc_RSL:RSL_PROC); |
| if (isvalue(bts[1])) { |
| connect(vc_conn:RSL1, bts[1].rsl.vc_RSL:CLIENT_PT); |
| connect(vc_conn:RSL1_PROC, bts[1].rsl.vc_RSL:RSL_PROC); |
| } |
| if (isvalue(bts[2])) { |
| connect(vc_conn:RSL2, bts[2].rsl.vc_RSL:CLIENT_PT); |
| connect(vc_conn:RSL2_PROC, bts[2].rsl.vc_RSL:RSL_PROC); |
| } |
| connect(vc_conn:BSSAP, g_bssap[bssap_idx].vc_RAN:CLIENT); |
| connect(vc_conn:MGCP, vc_MGCP:MGCP_CLIENT); |
| connect(vc_conn:MGCP_MULTI, vc_MGCP:MGCP_CLIENT_MULTI); |
| connect(vc_conn:STATSD_PROC, vc_STATSD:STATSD_PROC); |
| } |
| |
| function f_start_handler(void_fn fn, template (omit) TestHdlrParams pars := omit) |
| runs on test_CT return MSC_ConnHdlr { |
| var charstring id := testcasename(); |
| var MSC_ConnHdlr vc_conn; |
| var integer bssap_idx := 0; |
| if (isvalue(pars)) { |
| bssap_idx := valueof(pars).mscpool.bssap_idx; |
| } |
| vc_conn := MSC_ConnHdlr.create(id); |
| f_connect_handler(vc_conn, bssap_idx); |
| vc_conn.start(f_handler_init(fn, id, pars)); |
| return vc_conn; |
| } |
| |
| /* first function inside ConnHdlr component; sets g_pars + starts function */ |
| private function f_handler_init(void_fn fn, charstring id, template (omit) TestHdlrParams pars := omit) |
| runs on MSC_ConnHdlr { |
| if (isvalue(pars)) { |
| g_pars := valueof(pars); |
| } |
| fn.apply(id); |
| } |
| |
| /* Establish signalling channel (non-assignment case) followed by cipher mode */ |
| private function f_tc_ciph_mode_a5(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeSIGNAL); |
| ass_cmd.pdu.bssmap.assignmentRequest.circuitIdentityCode := omit; |
| ass_cmd.pdu.bssmap.assignmentRequest.aoIPTransportLayer := omit; |
| exp_compl.pdu.bssmap.assignmentComplete.circuitIdentityCode := omit; |
| exp_compl.pdu.bssmap.assignmentComplete.aoIPTransportLayer := omit; |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| testcase TC_ciph_mode_a5_0() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('01'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| } |
| testcase TC_ciph_mode_a5_1() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('02'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| } |
| testcase TC_ciph_mode_a5_3() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('08'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_ciph_mode_a5), pars); |
| vc_conn.done; |
| } |
| |
| |
| /* establish initial channel, enable ciphering followed by assignment to ciphered channel */ |
| private function f_tc_assignment_fr_a5(charstring id) runs on MSC_ConnHdlr { |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| testcase TC_assignment_fr_a5_0() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('01'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| } |
| testcase TC_assignment_fr_a5_1() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('02'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| } |
| testcase TC_assignment_fr_a5_3() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| pars.encr := valueof(t_EncrParams('08'O, f_rnd_octstring(8))); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| } |
| |
| /* Expect ASSIGNMENT FAIL if mandatory IE is missing */ |
| private function f_tc_assignment_fr_a5_1_codec_missing(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| const OCT8 kc := '0001020304050607'O; |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| /* Omit: ass_cmd.pdu.bssmap.assignmentRequest.codecList */ |
| |
| f_establish_fully(ass_cmd, exp_fail); |
| } |
| testcase TC_assignment_fr_a5_1_codec_missing() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5_1_codec_missing)); |
| vc_conn.done; |
| } |
| |
| private function f_tc_assignment_fr_a5_4(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| const OCT8 kc := '0001020304050607'O; |
| const OCT16 kc128 := kc & kc; |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| f_establish_fully(ass_cmd, exp_compl); |
| f_cipher_mode('10'O, kc, kc128, true); |
| /* TODO: expect GSM0808_CAUSE_CIPHERING_ALGORITHM_NOT_SUPPORTED cause value */ |
| } |
| testcase TC_assignment_fr_a5_4() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5_4)); |
| vc_conn.done; |
| } |
| |
| |
| private function f_tc_assignment_sign(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_compl := tr_BSSMAP_AssignmentComplete(omit, omit); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelTypeSIGNAL); |
| |
| f_statsd_reset(); |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| var StatsDExpects expect := { |
| { name := "TTCN3.bsc.0.assignment.attempted", mtype := "c", min := 1, max := 1}, |
| { name := "TTCN3.bsc.0.assignment.completed", mtype := "c", min := 1, max := 1} |
| }; |
| f_statsd_expect(expect); |
| } |
| |
| testcase TC_assignment_sign() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_tc_assignment_sign)); |
| vc_conn.done; |
| } |
| |
| /*********************************************************************** |
| * Codec (list) testing |
| ***********************************************************************/ |
| |
| /* check if the given rsl_mode is compatible with the a_elem */ |
| private function f_match_codec(BSSMAP_FIELD_CodecElement a_elem, RSL_IE_ChannelMode rsl_mode) |
| return boolean { |
| select (a_elem.codecType) { |
| case (GSM_FR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_F, RSL_CMOD_SP_GSM1))) { |
| return true; |
| } |
| } |
| case (GSM_HR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_H, RSL_CMOD_SP_GSM1))) { |
| return true; |
| } |
| } |
| case (GSM_EFR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_F, RSL_CMOD_SP_GSM2))) { |
| return true; |
| } |
| } |
| case (FR_AMR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_F, RSL_CMOD_SP_GSM3))) { |
| return true; |
| } |
| } |
| case (HR_AMR) { |
| if (match(rsl_mode, tr_RSL_ChanMode(RSL_CHRT_TCH_H, RSL_CMOD_SP_GSM3))) { |
| return true; |
| } |
| } |
| case else { } |
| } |
| return false; |
| } |
| |
| /* check if the given rsl_mode is compatible with the a_list */ |
| private function f_match_codecs(BSSMAP_IE_SpeechCodecList a_list, RSL_IE_ChannelMode rsl_mode) |
| return boolean { |
| for (var integer i := 0; i < sizeof(a_list); i := i+1) { |
| if (f_match_codec(a_list.codecElements[i], rsl_mode)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| /* determine BSSMAP_IE_ChannelType from *first* element of BSSMAP_FIELD_CodecElement */ |
| function f_BSSMAP_chtype_from_codec(BSSMAP_FIELD_CodecElement a_elem) |
| return BSSMAP_IE_ChannelType { |
| /* FIXME: actually look at all elements of BSSMAP_IE_SpeechCodecList */ |
| var BSSMAP_IE_ChannelType ret := valueof(ts_BSSMAP_IE_ChannelType); |
| select (a_elem.codecType) { |
| case (GSM_FR) { |
| ret.channelRateAndType := ChRate_TCHF; |
| ret.speechId_DataIndicator := Spdi_TCHF_FR; |
| } |
| case (GSM_HR) { |
| ret.channelRateAndType := ChRate_TCHH; |
| ret.speechId_DataIndicator := Spdi_TCHH_HR; |
| } |
| case (GSM_EFR) { |
| ret.channelRateAndType := ChRate_TCHF; |
| ret.speechId_DataIndicator := Spdi_TCHF_EFR; |
| } |
| case (FR_AMR) { |
| ret.channelRateAndType := ChRate_TCHF; |
| ret.speechId_DataIndicator := Spdi_TCHF_AMR; |
| } |
| case (HR_AMR) { |
| ret.channelRateAndType := ChRate_TCHH; |
| ret.speechId_DataIndicator := Spdi_TCHH_AMR; |
| } |
| case else { |
| setverdict(fail, "Unsupported codec ", a_elem); |
| mtc.stop; |
| } |
| } |
| return ret; |
| } |
| |
| private function f_rsl_chmod_tmpl_from_codec(BSSMAP_FIELD_CodecElement a_elem) |
| return template RSL_IE_Body { |
| var template RSL_IE_Body mode_ie := { |
| chan_mode := { |
| len := ?, |
| reserved := ?, |
| dtx_d := ?, |
| dtx_u := ?, |
| spd_ind := RSL_SPDI_SPEECH, |
| ch_rate_type := -, |
| coding_alg_rate := - |
| } |
| } |
| |
| select (a_elem.codecType) { |
| case (GSM_FR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_F; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM1; |
| } |
| case (GSM_HR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_H; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM1; |
| } |
| case (GSM_EFR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_F; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM2; |
| } |
| case (FR_AMR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_F; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM3; |
| } |
| case (HR_AMR) { |
| mode_ie.chan_mode.ch_rate_type := RSL_CHRT_TCH_H; |
| mode_ie.chan_mode.coding_alg_rate := RSL_CMOD_SP_GSM3; |
| } |
| } |
| return mode_ie; |
| } |
| |
| type record CodecListTest { |
| BSSMAP_IE_SpeechCodecList codec_list, |
| charstring id |
| } |
| type record of CodecListTest CodecListTests |
| |
| private function f_TC_assignment_codec(charstring id) runs on MSC_ConnHdlr { |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(g_pars.use_osmux); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(g_pars.use_osmux); |
| |
| /* puzzle together the ASSIGNMENT REQ for given codec[s] */ |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := g_pars.ass_codec_list; |
| exp_compl.pdu.bssmap.assignmentComplete.speechCodec.codecElements[0] := |
| g_pars.ass_codec_list.codecElements[0]; |
| if (isvalue(g_pars.expect_mr_s0_s7)) { |
| exp_compl.pdu.bssmap.assignmentComplete.speechCodec.codecElements[0].s0_7 := |
| g_pars.expect_mr_s0_s7; |
| } |
| } |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := |
| f_BSSMAP_chtype_from_codec(g_pars.ass_codec_list.codecElements[0]); |
| log("expecting ASS COMPL like this: ", exp_compl); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| /* Verify that the RSL-side activation actually matches our expectations */ |
| var RSL_Message rsl := f_rslem_get_last_act(RSL_PROC, 0, g_chan_nr); |
| |
| var RSL_IE_Body mode_ie; |
| if (f_rsl_find_ie(rsl, RSL_IE_CHAN_MODE, mode_ie) == false) { |
| setverdict(fail, "Couldn't find CHAN_MODE IE"); |
| mtc.stop; |
| } |
| var template RSL_IE_Body t_mode_ie := f_rsl_chmod_tmpl_from_codec(g_pars.ass_codec_list.codecElements[0]); |
| if (not match(mode_ie, t_mode_ie)) { |
| setverdict(fail, "RSL Channel Mode IE doesn't match expectation"); |
| } |
| |
| var RSL_IE_Body mr_conf; |
| if (g_pars.expect_mr_conf_ie != omit) { |
| if (f_rsl_find_ie(rsl, RSL_IE_MR_CONFIG, mr_conf) == false) { |
| setverdict(fail, "Missing MR CONFIG IE in RSL Chan Activ"); |
| mtc.stop; |
| } |
| log("found RSL MR CONFIG IE: ", mr_conf); |
| |
| if (not match(mr_conf, g_pars.expect_mr_conf_ie)) { |
| setverdict(fail, "RSL MR CONFIG IE does not match expectation. Expected: ", |
| g_pars.expect_mr_conf_ie); |
| } |
| } else { |
| if (f_rsl_find_ie(rsl, RSL_IE_MR_CONFIG, mr_conf) == true) { |
| log("found RSL MR CONFIG IE: ", mr_conf); |
| setverdict(fail, "Found MR CONFIG IE in RSL Chan Activ, expecting omit"); |
| mtc.stop; |
| } |
| } |
| } |
| |
| private function f_TC_assignment_codec_fail(charstring id) runs on MSC_ConnHdlr { |
| |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| |
| /* puzzle together the ASSIGNMENT REQ for given codec[s] */ |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := g_pars.ass_codec_list; |
| } |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := |
| f_BSSMAP_chtype_from_codec(g_pars.ass_codec_list.codecElements[0]); |
| log("expecting ASS FAIL like this: ", exp_fail); |
| |
| f_establish_fully(ass_cmd, exp_fail); |
| } |
| |
| testcase TC_assignment_codec_fr() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| } |
| |
| testcase TC_assignment_codec_hr() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR})); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| } |
| |
| testcase TC_assignment_codec_efr() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecEFR})); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| } |
| |
| /* Allow 5,90k only (current default config) */ |
| private function f_allow_amr_rate_5_90k() runs on test_CT { |
| f_vty_enter_cfg_msc(BSCVTY, 0); |
| f_vty_transceive(BSCVTY, "amr-config 12_2k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 10_2k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 7_95k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 7_40k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 6_70k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 5_90k allowed"); |
| f_vty_transceive(BSCVTY, "amr-config 5_15k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 4_75k forbidden"); |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| /* Allow 4,75k, 5,90k, 4,70k and 12,2k, which are the most common rates |
| * ("Config-NB-Code = 1") */ |
| private function f_allow_amr_rate_4_75k_5_90k_7_40k_12_20k() runs on test_CT { |
| f_vty_enter_cfg_msc(BSCVTY, 0); |
| f_vty_transceive(BSCVTY, "amr-config 12_2k allowed"); |
| f_vty_transceive(BSCVTY, "amr-config 10_2k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 7_95k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 7_40k allowed"); |
| f_vty_transceive(BSCVTY, "amr-config 6_70k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 5_90k allowed"); |
| f_vty_transceive(BSCVTY, "amr-config 5_15k forbidden"); |
| f_vty_transceive(BSCVTY, "amr-config 4_75k allowed"); |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| testcase TC_assignment_codec_amr_f() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| /* Note: This setups the codec configuration. The parameter payload in |
| * mr_conf must be consistant with the parameter codecElements in pars |
| * and also must match the amr-config in osmo-bsc.cfg! */ |
| var RSL_IE_Body mr_conf := { |
| other := { |
| len := 2, |
| payload := '2804'O |
| } |
| }; |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_F})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '01010111'B; |
| pars.expect_mr_conf_ie := mr_conf; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| } |
| |
| testcase TC_assignment_codec_amr_h() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| /* See note above */ |
| var RSL_IE_Body mr_conf := { |
| other := { |
| len := 2, |
| payload := '2804'O |
| } |
| }; |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| pars.expect_mr_conf_ie := mr_conf; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| } |
| |
| function f_TC_assignment_codec_amr(boolean fr, octetstring mrconf, bitstring s8_s0, bitstring exp_s8_s0) |
| runs on test_CT { |
| |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| /* See note above */ |
| var RSL_IE_Body mr_conf := { |
| other := { |
| len := lengthof(mrconf), |
| payload := mrconf |
| } |
| }; |
| |
| if (fr) { |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_F})); |
| } else { |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| } |
| pars.ass_codec_list.codecElements[0].s0_7 := s8_s0; |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| pars.expect_mr_conf_ie := mr_conf; |
| pars.expect_mr_s0_s7 := exp_s8_s0; |
| |
| f_init(1, true); |
| f_allow_amr_rate_4_75k_5_90k_7_40k_12_20k(); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| f_allow_amr_rate_5_90k(); |
| } |
| |
| function f_TC_assignment_codec_amr_fail(boolean fr, bitstring s8_s0) |
| runs on test_CT { |
| |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| if (fr) { |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_F})); |
| } else { |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| } |
| pars.ass_codec_list.codecElements[0].s0_7 := s8_s0; |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| |
| f_init(1, true); |
| f_allow_amr_rate_4_75k_5_90k_7_40k_12_20k(); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_fail), pars); |
| vc_conn.done; |
| f_allow_amr_rate_5_90k(); |
| } |
| |
| |
| /* Set S1, we expect an AMR multirate configuration IE with all four rates |
| * set. */ |
| testcase TC_assignment_codec_amr_f_S1() runs on test_CT { |
| f_TC_assignment_codec_amr(true, '289520882208'O, '00000010'B, '00000010'B); |
| } |
| |
| /* Set S1, we expect an AMR multirate configuration IE with the lower three |
| * rates set. */ |
| testcase TC_assignment_codec_amr_h_S1() runs on test_CT { |
| f_TC_assignment_codec_amr(false, '2815208820'O, '00000010'B, '00000010'B); |
| } |
| |
| /* Set S1 and two other rates, we expect an AMR MULTIRATE CONFIGURATION IE with |
| * all four rates (and only S1 set in the ASSIGNMENT COMPLETE) */ |
| testcase TC_assignment_codec_amr_f_S124() runs on test_CT { |
| f_TC_assignment_codec_amr(true, '289520882208'O, '00010110'B, '00000010'B); |
| } |
| |
| /* Set S1 and two other rates, we expect an AMR MULTIRATE CONFIGURATION IE with |
| * all four rates (and only S1 set in the ASSIGNMENT COMPLETE) */ |
| testcase TC_assignment_codec_amr_h_S124() runs on test_CT { |
| f_TC_assignment_codec_amr(false, '2815208820'O, '00010110'B, '00000010'B); |
| } |
| |
| /* The following block of tests selects more and more rates until all four |
| * possible rates are in the active set (full rate) */ |
| testcase TC_assignment_codec_amr_f_S0() runs on test_CT { |
| f_TC_assignment_codec_amr(true, '2801'O, '00000001'B, '00000001'B); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S02() runs on test_CT { |
| f_TC_assignment_codec_amr(true, '28052080'O, '00000101'B, '00000101'B); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S024() runs on test_CT { |
| f_TC_assignment_codec_amr(true, '2815208820'O, '00010101'B, '00010101'B); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S0247() runs on test_CT { |
| f_TC_assignment_codec_amr(true, '289520882208'O, '10010101'B, '10010101'B); |
| } |
| |
| /* The following block of tests selects more and more rates until all three |
| * possible rates are in the active set (half rate) */ |
| testcase TC_assignment_codec_amr_h_S0() runs on test_CT { |
| f_TC_assignment_codec_amr(false, '2801'O, '00000001'B, '00000001'B); |
| } |
| |
| testcase TC_assignment_codec_amr_h_S02() runs on test_CT { |
| f_TC_assignment_codec_amr(false, '28052080'O, '00000101'B, '00000101'B); |
| } |
| |
| testcase TC_assignment_codec_amr_h_S024() runs on test_CT { |
| f_TC_assignment_codec_amr(false, '2815208820'O, '00010101'B, '00010101'B); |
| } |
| |
| /* The following block tests what happens when the MSC does offer rate |
| * configurations that are not supported by the BSC. Normally such situations |
| * should not happen because the MSC gets informed by the BSC in advance via |
| * the L3 COMPLETE message which rates are applicable. The MSC should not try |
| * to offer rates that are not applicable anyway. */ |
| |
| testcase TC_assignment_codec_amr_h_S0247() runs on test_CT { |
| /* Try to include 12,2k in into the active set even though the channel |
| * is half rate only. The BSC is expected to remove the 12,0k */ |
| f_TC_assignment_codec_amr(false, '2815208820'O, '10010101'B, '00010101'B); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S01234567() runs on test_CT { |
| /* See what happens when all rates are selected at once. Since then |
| * Also S1 is selected, this setting will be prefered and we should |
| * get 12.2k, 7,40k, 5,90k, and 4,75k in the active set. */ |
| f_TC_assignment_codec_amr(true, '289520882208'O, '11111111'B, '00000010'B); |
| } |
| |
| testcase TC_assignment_codec_amr_f_S0234567() runs on test_CT { |
| /* Same as above, but with S1 missing, the MSC is then expected to |
| * select the currently supported rates, which are also 12.2k, 7,40k, |
| * 5,90k, and 4,75k, into the active set. */ |
| f_TC_assignment_codec_amr(true, '289520882208'O, '11111101'B, '10010101'B); |
| } |
| |
| testcase TC_assignment_codec_amr_f_zero() runs on test_CT { |
| /* Try to select no rates at all */ |
| f_TC_assignment_codec_amr_fail(true, '00000000'B); |
| } |
| |
| testcase TC_assignment_codec_amr_f_unsupp() runs on test_CT { |
| /* Try to select only unsupported rates */ |
| f_TC_assignment_codec_amr_fail(true, '01101000'B); |
| } |
| |
| testcase TC_assignment_codec_amr_h_S7() runs on test_CT { |
| /* Try to select 12,2k for half rate */ |
| f_TC_assignment_codec_amr_fail(false, '10000000'B); |
| } |
| |
| private function f_disable_all_tch_f() runs on test_CT { |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 1 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 2 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 3 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 4 sub-slot 0 borken"); |
| } |
| |
| private function f_disable_all_tch_h() runs on test_CT { |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 5 sub-slot 0 borken"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 5 sub-slot 1 borken"); |
| } |
| |
| private function f_enable_all_tch() runs on test_CT { |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 1 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 2 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 3 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 4 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 5 sub-slot 0 unused"); |
| f_vty_transceive(BSCVTY, "bts 0 trx 0 timeslot 5 sub-slot 1 unused"); |
| } |
| |
| /* Allow HR only */ |
| private function f_TC_assignment_codec_xr_exhausted_req_hr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '09'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '05'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR})); |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| |
| /* Allow FR only */ |
| private function f_TC_assignment_codec_xr_exhausted_req_fr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '08'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '01'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| |
| /* Allow HR only (expect assignment failure) */ |
| private function f_TC_assignment_codec_xr_exhausted_req_hr_fail(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '09'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '05'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR})); |
| f_establish_fully(ass_cmd, exp_fail); |
| } |
| |
| /* Allow FR only (expect assignment failure) */ |
| private function f_TC_assignment_codec_xr_exhausted_req_fr_fail(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_fail := tr_BSSMAP_AssignmentFail; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '08'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '01'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| f_establish_fully(ass_cmd, exp_fail); |
| } |
| |
| /* Allow FR and HR, but prefer FR */ |
| private function f_TC_assignment_codec_fr_exhausted_req_fr_hr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0A'O; /* Prefer FR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8105'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR, ts_CodecHR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000101'B; /* Expect HR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| |
| /* Allow FR and HR, but prefer HR */ |
| private function f_TC_assignment_codec_fr_exhausted_req_hr_fr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0B'O; /* Prefer HR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8501'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR, ts_CodecFR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000101'B; /* Expect HR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| |
| /* Allow FR and HR, but prefer FR */ |
| private function f_TC_assignment_codec_hr_exhausted_req_fr_hr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0A'O; /* Prefer FR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8105'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR, ts_CodecHR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000001'B; /* Expect FR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| |
| /* Allow FR and HR, but prefer HR */ |
| private function f_TC_assignment_codec_hr_exhausted_req_hr_fr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0B'O; /* Prefer HR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8501'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR, ts_CodecFR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000001'B; /* Expect FR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| |
| /* Request a HR channel while all FR channels are exhausted, this is expected |
| * to work without conflicts */ |
| testcase TC_assignment_codec_fr_exhausted_req_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_f(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_xr_exhausted_req_hr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| setverdict(pass); |
| } |
| |
| /* Request a FR channel while all FR channels are exhausted, this is expected |
| * to fail. */ |
| testcase TC_assignment_codec_fr_exhausted_req_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_f(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_xr_exhausted_req_fr_fail)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| setverdict(pass); |
| } |
| |
| /* Request a FR (prefered) or alternatively a HR channel while all FR channels |
| * are exhausted, this is expected to be resolved by selecting a HR channel. */ |
| testcase TC_assignment_codec_fr_exhausted_req_fr_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_f(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_fr_exhausted_req_fr_hr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| setverdict(pass); |
| } |
| |
| /* Request a HR (prefered) or alternatively a FR channel while all FR channels |
| * are exhausted, this is expected to work without conflicts. */ |
| testcase TC_assignment_codec_fr_exhausted_req_hr_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_f(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_fr_exhausted_req_hr_fr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| setverdict(pass); |
| } |
| |
| /* Request a FR channel while all HR channels are exhausted, this is expected |
| * to work without conflicts */ |
| testcase TC_assignment_codec_hr_exhausted_req_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_h(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_xr_exhausted_req_fr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| setverdict(pass); |
| } |
| |
| /* Request a HR channel while all HR channels are exhausted, this is expected |
| * to fail. */ |
| testcase TC_assignment_codec_hr_exhausted_req_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_h(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_xr_exhausted_req_hr_fail)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| setverdict(pass); |
| } |
| |
| /* Request a HR (prefered) or alternatively a FR channel while all HR channels |
| * are exhausted, this is expected to be resolved by selecting a FR channel. */ |
| testcase TC_assignment_codec_hr_exhausted_req_hr_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_h(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_hr_exhausted_req_hr_fr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| setverdict(pass); |
| } |
| |
| /* Request a FR (prefered) or alternatively a HR channel while all HR channels |
| * are exhausted, this is expected to work without conflicts. */ |
| testcase TC_assignment_codec_hr_exhausted_req_fr_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| f_disable_all_tch_h(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_hr_exhausted_req_fr_hr)); |
| vc_conn.done; |
| f_enable_all_tch(); |
| setverdict(pass); |
| } |
| |
| /* Allow FR and HR, but prefer HR */ |
| private function f_TC_assignment_codec_req_hr_fr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0B'O; /* Prefer HR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8501'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecHR, ts_CodecFR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000101'B; /* Expect HR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| |
| /* Allow FR and HR, but prefer FR */ |
| private function f_TC_assignment_codec_req_fr_hr(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.channelRateAndType := '0A'O; /* Prefer FR */ |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType.speechId_DataIndicator := '8105'O; |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR, ts_CodecHR})); |
| exp_compl.pdu.bssmap.assignmentComplete.speechVersion.speechVersionIdentifier := '0000001'B; /* Expect FR */ |
| f_establish_fully(ass_cmd, exp_compl); |
| } |
| |
| /* Request a HR (prefered) or alternatively a FR channel, it is expected that |
| * HR, which is the prefered type, is selected. */ |
| testcase TC_assignment_codec_req_hr_fr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_req_hr_fr)); |
| vc_conn.done; |
| setverdict(pass); |
| } |
| |
| /* Request a FR (prefered) or alternatively a HR channel, it is expected that |
| * FR, which is the prefered type, is selected. */ |
| testcase TC_assignment_codec_req_fr_hr() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| f_enable_all_tch(); |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec_req_fr_hr)); |
| vc_conn.done; |
| setverdict(pass); |
| } |
| |
| testcase TC_assignment_osmux() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| /* See note above */ |
| var RSL_IE_Body mr_conf := { |
| other := { |
| len := 2, |
| payload := '2804'O |
| } |
| }; |
| |
| pars.ass_codec_list := valueof(ts_BSSMAP_IE_CodecList({ts_CodecAMR_H})); |
| pars.ass_codec_list.codecElements[0].s0_7 := '00000100'B; /* 5,90k */ |
| pars.ass_codec_list.codecElements[0].s8_15 := '00000111'B; |
| pars.expect_mr_conf_ie := mr_conf; |
| pars.use_osmux := true; |
| |
| f_init(1, true, true); |
| f_sleep(1.0); |
| |
| vc_conn := f_start_handler(refers(f_TC_assignment_codec), pars); |
| vc_conn.done; |
| } |
| |
| /* test the procedure of the MSC requesting a Classmark Update: |
| * a) BSSMAP Classmark Request should result in RR CLASSMARK ENQUIRY, |
| * b) L3 RR CLASSMARK CHANGE should result in BSSMAP CLASSMARK UPDATE */ |
| private function f_tc_classmark(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| BSSAP.receive(tr_BSSMAP_ComplL3); |
| |
| BSSAP.send(ts_BSSMAP_ClassmarkRequest); |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_CM_ENQUIRY)); |
| |
| f_rsl_send_l3(ts_RRM_CM_CHG(valueof(ts_CM2))); |
| BSSAP.receive(tr_BSSMAP_ClassmarkUpd(?, omit)); |
| setverdict(pass); |
| } |
| testcase TC_classmark() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_classmark)); |
| vc_conn.done; |
| } |
| |
| /* Send a CommonID from the simulated MSC and verify that the information is used to |
| * fill BSC-internal data structures (specifically, bsc_subscr associated with subscr_conn) */ |
| private function f_tc_common_id(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| f_MscConnHdlr_init_vty(); |
| |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| BSSAP.receive(tr_BSSMAP_ComplL3); |
| |
| /* Send CommonID */ |
| BSSAP.send(ts_BSSMAP_CommonId(g_pars.imsi)); |
| |
| /* Use VTY to verify that the IMSI of the subscr_conn is set */ |
| var charstring regex := "*(IMSI: " & hex2str(g_pars.imsi) & ")*"; |
| f_vty_transceive_match_regexp_retry(BSCVTY, "show conns", regex, 0, 4, 1.0); |
| |
| setverdict(pass); |
| } |
| testcase TC_common_id() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_common_id)); |
| vc_conn.done; |
| } |
| |
| private function f_est_single_l3(template PDU_ML3_MS_NW l3) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| BSSAP.receive(tr_BSSMAP_ComplL3); |
| |
| /* send the single message we want to send */ |
| f_rsl_send_l3(l3); |
| } |
| |
| private function f_bssap_expect_nothing(float sec := 5.00) runs on MSC_ConnHdlr { |
| timer T := sec; |
| var PDU_BSSAP bssap; |
| T.start; |
| alt { |
| [] BSSAP.receive(PDU_BSSAP:?) -> value bssap { |
| setverdict(fail, "Unexpected BSSMAP ", bssap); |
| mtc.stop; |
| } |
| [] T.timeout { |
| setverdict(pass); |
| } |
| } |
| } |
| |
| /* unsolicited ASSIGNMENT FAIL (without ASSIGN) from MS shouldn't bring BSC down */ |
| private function f_tc_unsol_ass_fail(charstring id) runs on MSC_ConnHdlr { |
| f_est_single_l3(ts_RRM_AssignmentFailure('00'O)); |
| f_bssap_expect_nothing(); |
| } |
| testcase TC_unsol_ass_fail() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_unsol_ass_fail)); |
| vc_conn.done; |
| } |
| |
| |
| /* unsolicited ASSIGNMENT COMPLETE (without ASSIGN) from MS shouldn't bring BSC down */ |
| private function f_tc_unsol_ass_compl(charstring id) runs on MSC_ConnHdlr { |
| f_est_single_l3(ts_RRM_AssignmentComplete('00'O)); |
| f_bssap_expect_nothing(); |
| } |
| testcase TC_unsol_ass_compl() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_unsol_ass_compl)); |
| vc_conn.done; |
| } |
| |
| |
| /* unsolicited HANDOVER FAIL (without ASSIGN) from MS shouldn't bring BSC down */ |
| private function f_tc_unsol_ho_fail(charstring id) runs on MSC_ConnHdlr { |
| f_est_single_l3(ts_RRM_HandoverFailure('00'O)); |
| f_bssap_expect_nothing(); |
| } |
| testcase TC_unsol_ho_fail() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_unsol_ho_fail)); |
| vc_conn.done; |
| } |
| |
| |
| /* short message from MS should be ignored */ |
| private function f_tc_err_82_short_msg(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| f_create_chan_and_exp(); |
| /* we should now have a COMPL_L3 at the MSC */ |
| BSSAP.receive(tr_BSSMAP_ComplL3); |
| |
| /* send short message */ |
| RSL.send(ts_RSL_DATA_IND(g_chan_nr, valueof(ts_RslLinkID_DCCH(0)), ''O)); |
| f_bssap_expect_nothing(); |
| } |
| testcase TC_err_82_short_msg() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_err_82_short_msg)); |
| vc_conn.done; |
| } |
| |
| |
| /* 24.008 8.4 Unknown message must trigger RR STATUS */ |
| private function f_tc_err_84_unknown_msg(charstring id) runs on MSC_ConnHdlr { |
| f_est_single_l3(ts_RRM_UL_REL('00'O)); |
| timer T := 3.0 |
| alt { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_STATUS)) { |
| setverdict(pass); |
| } |
| [] BSSAP.receive { setverdict(fail, "unexpected BSSAP"); } |
| [] T.timeout { setverdict(fail, "Timeout waiting for RR STATUS"); } |
| } |
| } |
| testcase TC_err_84_unknown_msg() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_err_84_unknown_msg)); |
| vc_conn.done; |
| } |
| |
| /*********************************************************************** |
| * Handover |
| ***********************************************************************/ |
| |
| /* execute a "bts <0-255> trx <0-255> timeslot <0-7> " command on given Dchan */ |
| private function f_vty_ts_action(charstring suffix, integer bts_nr, integer trx_nr, integer ts_nr) |
| runs on test_CT { |
| var charstring cmd := "bts "&int2str(bts_nr)&" trx "&int2str(trx_nr)& |
| " timeslot "&int2str(ts_nr)&" "; |
| f_vty_transceive(BSCVTY, cmd & suffix); |
| } |
| |
| /* execute a "bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7>" command on given Dchan */ |
| private function f_vty_ss_action(TELNETasp_PT pt, charstring suffix, |
| uint8_t bts_nr, uint8_t trx_nr, |
| in RslChannelNr chan_nr) |
| { |
| /* FIXME: resolve those from component-global state */ |
| var integer ts_nr := chan_nr.tn; |
| var integer ss_nr; |
| if (ischosen(chan_nr.u.ch0)) { |
| ss_nr := 0; |
| } else if (ischosen(chan_nr.u.lm)) { |
| ss_nr := chan_nr.u.lm.sub_chan; |
| } else if (ischosen(chan_nr.u.sdcch4)) { |
| ss_nr := chan_nr.u.sdcch4.sub_chan; |
| } else if (ischosen(chan_nr.u.sdcch8)) { |
| ss_nr := chan_nr.u.sdcch8.sub_chan; |
| } else { |
| setverdict(fail, "Invalid ChanNr ", chan_nr); |
| mtc.stop; |
| } |
| |
| var charstring cmd := "bts "&int2str(bts_nr)&" trx "&int2str(trx_nr)& |
| " timeslot "&int2str(ts_nr)&" sub-slot "&int2str(ss_nr)&" "; |
| f_vty_transceive(pt, cmd & suffix); |
| } |
| |
| /* Even though the VTY command to trigger handover takes a new BTS number as argument, behind the scenes osmo-bsc always |
| * translates that to a target ARFCN+BSIC first. See bsc_vty.c trigger_ho_or_as(), which puts the selected BTS' neighbor |
| * ident key (ARFCN + BSIC) in the struct passed on to handover_request(). handover_start() then resolves that to a |
| * viable actual neighbor cell. So from the internal osmo-bsc perspective, we always request handover to an ARFCN + BSIC |
| * pair, not really to a specific BTS number. */ |
| private function f_vty_handover(TELNETasp_PT pt, uint8_t bts_nr, uint8_t trx_nr, |
| in RslChannelNr chan_nr, uint8_t new_bts_nr) |
| { |
| f_vty_ss_action(pt, "handover " & int2str(new_bts_nr), bts_nr, trx_nr, chan_nr); |
| } |
| |
| /* intra-BSC hand-over between BTS0 and BTS1 */ |
| private function f_tc_ho_int(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| const OCT8 kc := '0001020304050607'O; |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| f_establish_fully(ass_cmd, exp_compl); |
| f_bts_0_cfg(BSCVTY, {"neighbor bts 1"}); |
| |
| var HandoverState hs := { |
| rr_ho_cmpl_seen := false, |
| handover_done := false, |
| old_chan_nr := - |
| }; |
| /* issue hand-over command on VTY */ |
| f_vty_handover(BSCVTY, 0, 0, g_chan_nr, 1); |
| /* temporarily suspend DChan processing on BTS1 to avoid race with RSLEM_register */ |
| f_rslem_suspend(RSL1_PROC); |
| |
| /* From the MGW perspective, a handover is is characterized by |
| * performing one MDCX operation with the MGW. So we expect to see |
| * one more MDCX during handover. */ |
| g_media.mgcp_conn[0].mdcx_seen_exp := g_media.mgcp_conn[0].crcx_seen_exp + 1; |
| |
| alt { |
| [] as_handover(hs); |
| } |
| |
| /* Since this is an internal handover we expect the BSC to inform the |
| * MSC about the event */ |
| BSSAP.receive(tr_BSSMAP_HandoverPerformed); |
| |
| /* Check the amount of MGCP transactions is still consistant with the |
| * test expectation */ |
| f_check_mgcp_expectations() |
| f_sleep(0.5); |
| } |
| |
| testcase TC_ho_int() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(2, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_int)); |
| vc_conn.done; |
| |
| /* from f_establish_fully() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| /* from handover */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:completed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| /* Expecting MGCP to DLCX the endpoint's two connections: towards BTS and towards MSC */ |
| private function f_expect_dlcx_conns() runs on MSC_ConnHdlr { |
| var MgcpCommand mgcp; |
| var template MgcpResponse mgcp_resp; |
| var MGCP_RecvFrom mrf; |
| var template MgcpMessage msg_resp; |
| var template MgcpMessage msg_dlcx := { |
| command := tr_DLCX() |
| } |
| |
| if (g_pars.aoip) { |
| MGCP.receive(tr_DLCX()) -> value mgcp { |
| log("Got first DLCX: ", mgcp); |
| MGCP.send(ts_DLCX_ACK2(mgcp.line.trans_id)); |
| }; |
| |
| MGCP.receive(tr_DLCX()) -> value mgcp { |
| log("Got second DLCX: ", mgcp); |
| MGCP.send(ts_DLCX_ACK2(mgcp.line.trans_id)); |
| }; |
| } else { |
| /* For SCCPLite, BSC doesn't handle the MSC-side */ |
| MGCP_MULTI.receive(tr_MGCP_RecvFrom_any(msg_dlcx)) -> value mrf { |
| log("Got first DLCX: ", mrf.msg.command); |
| msg_resp := { |
| response := ts_DLCX_ACK2(mrf.msg.command.line.trans_id) |
| } |
| MGCP_MULTI.send(t_MGCP_SendToMrf(mrf, msg_resp)); |
| }; |
| } |
| |
| BSSAP.receive(tr_BSSMAP_ClearComplete); |
| } |
| |
| private function f_tc_ho_out_of_this_bsc(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| var PDU_BSSAP ass_req := f_gen_ass_req(); |
| ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| f_establish_fully(ass_req, exp_compl); |
| |
| f_bts_0_cfg(BSCVTY, {"neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "handover any to arfcn 123 bsic any"); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequired); |
| |
| f_sleep(0.5); |
| /* The MSC negotiates Handover Request and Handover Request Ack with |
| * the other BSS and comes back with a BSSMAP Handover Command |
| * containing an RR Handover Command coming from the target BSS... */ |
| |
| var PDU_ML3_NW_MS rr_ho_cmd := valueof(ts_RR_HandoverCommand); |
| log("Remote cell's RR Handover Command passed through as L3 Info: ", rr_ho_cmd); |
| var octetstring rr_ho_cmd_enc := enc_PDU_ML3_NW_MS(rr_ho_cmd); |
| log("Remote cell's RR Handover Command passed through as L3 Info, encoded: ", rr_ho_cmd_enc); |
| BSSAP.send(ts_BSSMAP_HandoverCommand(rr_ho_cmd_enc)); |
| |
| /* expect the Handover Command to go out on RR */ |
| var RSL_Message rsl_ho_cmd |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, ?)) -> value rsl_ho_cmd; |
| log("RSL Data Req went out to first BTS: ", rsl_ho_cmd); |
| var RSL_IE_Body rsl_ho_cmd_l3; |
| if (not f_rsl_find_ie(rsl_ho_cmd, RSL_IE_L3_INFO, rsl_ho_cmd_l3)) { |
| log("RSL message contains no L3 Info IE, expected RR Handover Command"); |
| setverdict(fail); |
| } else { |
| log("Found L3 Info: ", rsl_ho_cmd_l3); |
| if (rsl_ho_cmd_l3.l3_info.payload != rr_ho_cmd_enc) { |
| log("FAIL: the BSC sent out a different L3 Info, not matching the RR Handover Command the other BSS forwarded."); |
| setverdict(fail); |
| } else { |
| log("Success: the BSC sent out the same RR Handover Command the other BSS forwarded."); |
| setverdict(pass); |
| } |
| } |
| |
| /* When the other BSS has reported a completed handover, this side is |
| * torn down. */ |
| |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_HANDOVER_SUCCESSFUL; |
| var BssmapCause cause := enum2int(cause_val); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| f_expect_dlcx_conns(); |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_ho_out_of_this_bsc() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_out_of_this_bsc)); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:completed"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| /* BSC asks for inter-BSC HO, but the MSC decides that it won't happen and |
| * simply never sends a BSSMAP Handover Command. */ |
| private function f_tc_ho_out_fail_no_msc_response(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| var PDU_BSSAP ass_req := f_gen_ass_req(); |
| ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| f_establish_fully(ass_req, exp_compl); |
| |
| f_bts_0_cfg(BSCVTY, {"neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "handover any to arfcn 123 bsic any"); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequired); |
| |
| /* osmo-bsc should time out 10 seconds after the handover started. |
| * Let's give it a bit extra. */ |
| f_sleep(15.0); |
| |
| /* The old lchan and conn should still be active. See that arbitrary L3 |
| * is still going through. */ |
| var octetstring l3 := '0123456789'O; |
| RSL.send(ts_RSL_DATA_IND(g_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| var template PDU_BSSAP exp_data := { |
| discriminator := '1'B, |
| spare := '0000000'B, |
| dlci := '00'O, |
| lengthIndicator := 5, |
| pdu := { |
| dtap := l3 |
| } |
| }; |
| BSSAP.receive(exp_data); |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_ho_out_fail_no_msc_response() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_out_fail_no_msc_response)); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| /* BSC asks for inter-BSC HO, receives BSSMAP Handover Command, but MS reports |
| * RR Handover Failure. */ |
| private function f_tc_ho_out_fail_rr_ho_failure(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| var PDU_BSSAP ass_req := f_gen_ass_req(); |
| ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| f_establish_fully(ass_req, exp_compl); |
| |
| f_bts_0_cfg(BSCVTY, {"neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "handover any to arfcn 123 bsic any"); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequired); |
| |
| f_sleep(0.5); |
| /* The MSC negotiates Handover Request and Handover Request Ack with |
| * the other BSS and comes back with a BSSMAP Handover Command |
| * containing an RR Handover Command coming from the target BSS... */ |
| |
| var PDU_ML3_NW_MS rr_ho_cmd := valueof(ts_RR_HandoverCommand); |
| log("Remote cell's RR Handover Command passed through as L3 Info: ", rr_ho_cmd); |
| var octetstring rr_ho_cmd_enc := enc_PDU_ML3_NW_MS(rr_ho_cmd); |
| log("Remote cell's RR Handover Command passed through as L3 Info, encoded: ", rr_ho_cmd_enc); |
| BSSAP.send(ts_BSSMAP_HandoverCommand(rr_ho_cmd_enc)); |
| |
| /* expect the Handover Command to go out on RR */ |
| var RSL_Message rsl_ho_cmd |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, ?)) -> value rsl_ho_cmd; |
| log("RSL Data Req went out to first BTS: ", rsl_ho_cmd); |
| var RSL_IE_Body rsl_ho_cmd_l3; |
| if (not f_rsl_find_ie(rsl_ho_cmd, RSL_IE_L3_INFO, rsl_ho_cmd_l3)) { |
| log("RSL message contains no L3 Info IE, expected RR Handover Command"); |
| setverdict(fail); |
| } else { |
| log("Found L3 Info: ", rsl_ho_cmd_l3); |
| if (rsl_ho_cmd_l3.l3_info.payload != rr_ho_cmd_enc) { |
| log("FAIL: the BSC sent out a different L3 Info, not matching the RR Handover Command the other BSS forwarded."); |
| setverdict(fail); |
| } else { |
| log("Success: the BSC sent out the same RR Handover Command the other BSS forwarded."); |
| setverdict(pass); |
| } |
| } |
| |
| f_sleep(0.2); |
| f_rsl_send_l3(ts_RRM_HandoverFailure('00'O)); |
| |
| /* Should tell the MSC about the failure */ |
| BSSAP.receive(tr_BSSMAP_HandoverFailure); |
| |
| f_sleep(1.0); |
| |
| /* The old lchan and conn should still be active. See that arbitrary L3 |
| * is still going through. */ |
| var octetstring l3 := '0123456789'O; |
| RSL.send(ts_RSL_DATA_IND(g_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); |
| var template PDU_BSSAP exp_data := { |
| discriminator := '1'B, |
| spare := '0000000'B, |
| dlci := '00'O, |
| lengthIndicator := 5, |
| pdu := { |
| dtap := l3 |
| } |
| }; |
| BSSAP.receive(exp_data); |
| setverdict(pass); |
| f_sleep(1.0); |
| |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_ho_out_fail_rr_ho_failure() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_out_fail_rr_ho_failure)); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:failed"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| /* BSC asks for inter-BSC-out HO, receives BSSMAP Handover Command, but then no reply is received about HO outcome |
| * (neither BSSMAP Clear Command for success nor RR Handover Failure). 48.008 3.1.5.3.3 "Abnormal Conditions" applies |
| * and the lchan is released. */ |
| private function f_tc_ho_out_fail_no_result_after_ho_cmd(charstring id) runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| |
| var PDU_BSSAP ass_req := f_gen_ass_req(); |
| ass_req.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_req.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| f_establish_fully(ass_req, exp_compl); |
| |
| f_bts_0_cfg(BSCVTY, {"neighbor lac 99 arfcn 123 bsic any"}); |
| f_vty_transceive(BSCVTY, "handover any to arfcn 123 bsic any"); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequired); |
| |
| f_sleep(0.5); |
| /* The MSC negotiates Handover Request and Handover Request Ack with |
| * the other BSS and comes back with a BSSMAP Handover Command |
| * containing an RR Handover Command coming from the target BSS... */ |
| |
| var PDU_ML3_NW_MS rr_ho_cmd := valueof(ts_RR_HandoverCommand); |
| log("Remote cell's RR Handover Command passed through as L3 Info: ", rr_ho_cmd); |
| var octetstring rr_ho_cmd_enc := enc_PDU_ML3_NW_MS(rr_ho_cmd); |
| log("Remote cell's RR Handover Command passed through as L3 Info, encoded: ", rr_ho_cmd_enc); |
| BSSAP.send(ts_BSSMAP_HandoverCommand(rr_ho_cmd_enc)); |
| |
| /* expect the Handover Command to go out on RR */ |
| var RSL_Message rsl_ho_cmd |
| RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, ?)) -> value rsl_ho_cmd; |
| log("RSL Data Req went out to first BTS: ", rsl_ho_cmd); |
| var RSL_IE_Body rsl_ho_cmd_l3; |
| if (not f_rsl_find_ie(rsl_ho_cmd, RSL_IE_L3_INFO, rsl_ho_cmd_l3)) { |
| log("RSL message contains no L3 Info IE, expected RR Handover Command"); |
| setverdict(fail); |
| } else { |
| log("Found L3 Info: ", rsl_ho_cmd_l3); |
| if (rsl_ho_cmd_l3.l3_info.payload != rr_ho_cmd_enc) { |
| log("FAIL: the BSC sent out a different L3 Info, not matching the RR Handover Command the other BSS forwarded."); |
| setverdict(fail); |
| } else { |
| log("Success: the BSC sent out the same RR Handover Command the other BSS forwarded."); |
| setverdict(pass); |
| } |
| } |
| |
| /* We get neither success nor failure report from the remote BSS. Eventually T8 times out and we run into 3GPP |
| * TS 48.008 3.1.5.3.3 "Abnormal Conditions": Clear Request should go to the MSC, and RR should be released |
| * after Clear Command */ |
| |
| var PDU_BSSAP rx_clear_request; |
| BSSAP.receive(tr_BSSMAP_ClearRequest) -> value rx_clear_request; |
| log("Got BSSMAP Clear Request"); |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := bit2int(rx_clear_request.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| var MgcpCommand mgcp; |
| interleave { |
| [] RSL.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) { |
| log("Got Deact SACCH"); |
| } |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE)) { |
| log("Got RR Release"); |
| } |
| [] RSL.receive(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL)) { |
| log("Got RF Chan Rel"); |
| RSL.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| } |
| } |
| |
| f_expect_dlcx_conns(); |
| |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_ho_out_fail_no_result_after_ho_cmd() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_out_fail_no_result_after_ho_cmd)); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_into_this_bsc(charstring id) runs on MSC_ConnHdlr { |
| /* Hack: the proper way would be to wait for the BSSMAP Handover Request ACK and extract the |
| * actual assigned chan_nr from its L3 (RR Handover Command) message. But osmo-bsc starts acting |
| * on the lchan even before we get a chance to evaluate the BSSMAP Handover Request ACK. So we |
| * need to assume that osmo-bsc will activate TS 1 and already set up this lchan's RSL emulation |
| * before we get started. */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media()); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. Here comes the new MS on |
| * the new lchan with a Handover RACH: */ |
| |
| /* send handover detect */ |
| |
| RSL.send(ts_RSL_HANDO_DET(new_chan_nr)); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverDetect); |
| |
| /* send handover complete over the new channel */ |
| |
| var PDU_ML3_MS_NW l3_tx := valueof(ts_RRM_HandoverComplete('00'O)); |
| RSL.send(ts_RSL_EST_IND(new_chan_nr, valueof(ts_RslLinkID_DCCH(0)), |
| enc_PDU_ML3_MS_NW(l3_tx))); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverComplete); |
| setverdict(pass); |
| } |
| testcase TC_ho_into_this_bsc() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_into_this_bsc), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:completed"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:completed"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_in_fail_msc_clears(charstring id) runs on MSC_ConnHdlr { |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media()); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* For deterministic test results, give some time for the MGW endpoint to be configured */ |
| f_sleep(1.0); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. In this case, the MS |
| * reports a Handover Failure to the old BSS, which forwards a BSSMAP |
| * Handover Failure to the MSC. The procedure according to 3GPP TS |
| * 48.008 3.1.5.3.2 "Handover Failure" is then that the MSC sends a |
| * BSSMAP Clear Command: */ |
| |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_RADIO_INTERFACE_FAILURE_REVERSION; |
| var BssmapCause cause := enum2int(cause_val); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| f_expect_dlcx_conns(); |
| setverdict(pass); |
| f_sleep(1.0); |
| |
| setverdict(pass); |
| } |
| testcase TC_ho_in_fail_msc_clears() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_in_fail_msc_clears), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:stopped"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:stopped"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_in_fail_msc_clears_after_ho_detect(charstring id) runs on MSC_ConnHdlr { |
| /* Hack: the proper way would be to wait for the BSSMAP Handover Request ACK and extract the |
| * actual assigned chan_nr from its L3 (RR Handover Command) message. But osmo-bsc starts acting |
| * on the lchan even before we get a chance to evaluate the BSSMAP Handover Request ACK. So we |
| * need to assume that osmo-bsc will activate TS 1 and already set up this lchan's RSL emulation |
| * before we get started. */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media()); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. Here comes the new MS on |
| * the new lchan with a Handover RACH: */ |
| |
| /* send handover detect */ |
| |
| RSL.send(ts_RSL_HANDO_DET(new_chan_nr)); |
| |
| BSSAP.receive(tr_BSSMAP_HandoverDetect); |
| |
| /* The MSC chooses to clear the connection now, maybe we got the |
| * Handover RACH on the new cell but the MS still signaled Handover |
| * Failure to the old BSS? */ |
| |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_RADIO_INTERFACE_FAILURE_REVERSION; |
| var BssmapCause cause := enum2int(cause_val); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| f_expect_dlcx_conns(); |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_ho_in_fail_msc_clears_after_ho_detect() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_in_fail_msc_clears_after_ho_detect), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:stopped"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:stopped"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| /* The new BSS's lchan times out before the MSC decides that handover failed. */ |
| private function f_tc_ho_in_fail_no_detect(charstring id) runs on MSC_ConnHdlr { |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media()); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. But the MS never shows up |
| * on the new lchan. */ |
| |
| BSSAP.receive(tr_BSSMAP_HandoverFailure); |
| |
| /* Did osmo-bsc also send a Clear Request? */ |
| timer T := 0.5; |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSMAP_ClearRequest); |
| [] T.timeout { } |
| } |
| |
| /* MSC plays along with a Clear Command (no matter whether osmo-bsc |
| * asked for it, this is a Handover Failure after all). */ |
| |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_RADIO_INTERFACE_FAILURE_REVERSION; |
| var BssmapCause cause := enum2int(cause_val); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| |
| f_expect_dlcx_conns(); |
| setverdict(pass); |
| f_sleep(1.0); |
| |
| setverdict(pass); |
| } |
| testcase TC_ho_in_fail_no_detect() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_in_fail_no_detect), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:error"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| /* Same as f_tc_ho_in_fail_no_detect, but MSC fails to send a Clear Command */ |
| private function f_tc_ho_in_fail_no_detect2(charstring id) runs on MSC_ConnHdlr { |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); |
| f_rslem_register(0, new_chan_nr); |
| g_chan_nr := new_chan_nr; |
| f_sleep(1.0); |
| |
| f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| activate(as_Media()); |
| |
| BSSAP.send(ts_BSSAP_Conn_Req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| f_gen_handover_req())); |
| BSSAP.receive(RAN_Conn_Prim:MSC_CONN_PRIM_CONF_IND); |
| |
| /* The RSL Emulation magically accepts the Chan Activ behind the scenes. */ |
| |
| var PDU_BSSAP rx_bssap; |
| var octetstring ho_command_str; |
| |
| BSSAP.receive(tr_BSSMAP_HandoverRequestAcknowledge(?)) -> value rx_bssap; |
| |
| ho_command_str := rx_bssap.pdu.bssmap.handoverRequestAck.layer3Information.layer3info; |
| log("Received L3 Info in HO Request Ack: ", ho_command_str); |
| var PDU_ML3_NW_MS ho_command := dec_PDU_ML3_NW_MS(ho_command_str); |
| log("L3 Info in HO Request Ack is ", ho_command); |
| |
| var GsmArfcn arfcn; |
| var RslChannelNr actual_new_chan_nr; |
| f_ChDesc2RslChanNr(ho_command.msgs.rrm.handoverCommand.channelDescription2, |
| actual_new_chan_nr, arfcn); |
| |
| if (actual_new_chan_nr != new_chan_nr) { |
| log("ERROR: osmo-bsc assigned a different lchan than we assumed above -- this test will fail now.", |
| " Assumed: ", new_chan_nr, " Assigned: ", actual_new_chan_nr); |
| setverdict(fail); |
| return; |
| } |
| log("Handover Command chan_nr is", actual_new_chan_nr); |
| |
| /* Now the MSC forwards the RR Handover Command to the other BSC, which |
| * tells the MS to handover to the new lchan. But the MS never shows up |
| * on the new lchan. */ |
| |
| BSSAP.receive(tr_BSSMAP_HandoverFailure); |
| |
| /* MSC plays dumb and sends no Clear Command */ |
| var PDU_BSSAP rx_clear_request; |
| |
| BSSAP.receive(tr_BSSMAP_ClearRequest) -> value rx_clear_request { |
| var BssmapCause cause := bit2int(rx_clear_request.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSMAP_ClearCommand(cause)); |
| }; |
| f_expect_dlcx_conns(); |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_ho_in_fail_no_detect2() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_ctrs_bsc_and_bts_init(); |
| |
| pars.sccp_addr_msc := g_bssap[0].sccp_addr_own; |
| pars.sccp_addr_bsc := g_bssap[0].sccp_addr_peer; |
| |
| vc_conn := f_start_handler(refers(f_tc_ho_in_fail_no_detect2), pars); |
| vc_conn.done; |
| |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_in:error"); |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| type record of charstring Commands; |
| |
| private function f_bts_0_cfg(TELNETasp_PT pt, Commands cmds := {}) |
| { |
| f_vty_enter_cfg_bts(pt, 0); |
| for (var integer i := 0; i < sizeof(cmds); i := i+1) { |
| f_vty_transceive(pt, cmds[i]); |
| } |
| f_vty_transceive(pt, "end"); |
| } |
| |
| private function f_cs7_inst_0_cfg(TELNETasp_PT pt, Commands cmds := {}) |
| { |
| f_vty_enter_cfg_cs7_inst(pt, 0); |
| for (var integer i := 0; i < sizeof(cmds); i := i+1) { |
| f_vty_transceive(pt, cmds[i]); |
| } |
| f_vty_transceive(pt, "end"); |
| } |
| |
| private function f_probe_for_handover(charstring log_label, |
| charstring log_descr, |
| charstring handover_vty_cmd, |
| boolean expect_handover, |
| boolean is_inter_bsc_handover := false) |
| runs on MSC_ConnHdlr |
| { |
| /* We're going to thwart any and all handover attempts, just be ready to handle (and ignore) handover target |
| * lchans to be established on bts 1 or bts 2. */ |
| f_rslem_suspend(RSL1_PROC); |
| f_rslem_suspend(RSL2_PROC); |
| |
| var RSL_Message rsl; |
| |
| var charstring log_msg := " (expecting handover)" |
| if (not expect_handover) { |
| log_msg := " (expecting NO handover)"; |
| } |
| log("f_probe_for_handover starting: " & log_label & ": " & log_descr & log_msg); |
| f_vty_transceive(BSCVTY, handover_vty_cmd); |
| |
| timer T := 2.0; |
| T.start; |
| |
| alt { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr)) -> value rsl { |
| var PDU_ML3_NW_MS l3 := dec_PDU_ML3_NW_MS(rsl.ies[2].body.l3_info.payload); |
| log("Rx L3 from net: ", l3); |
| if (ischosen(l3.msgs.rrm.handoverCommand)) { |
| var RslChannelNr new_chan_nr; |
| var GsmArfcn arfcn; |
| f_ChDesc2RslChanNr(l3.msgs.rrm.handoverCommand.channelDescription2, |
| new_chan_nr, arfcn); |
| log("Handover to new chan ", new_chan_nr, " on ARFCN ", arfcn); |
| log(l3.msgs.rrm.handoverCommand); |
| |
| /* Need to register for new lchan on new BTS -- it's either bts 1 or bts 2. It doesn't really |
| * matter on which BTS it really is, we're not going to follow through an entire handover |
| * anyway. */ |
| f_rslem_register(0, new_chan_nr, RSL1_PROC); |
| f_rslem_resume(RSL1_PROC); |
| f_rslem_register(0, new_chan_nr, RSL2_PROC); |
| f_rslem_resume(RSL2_PROC); |
| |
| if (expect_handover and not is_inter_bsc_handover) { |
| setverdict(pass); |
| log("f_probe_for_handover(" & log_label & "): Got RSL Handover Command as expected."); |
| } else { |
| setverdict(fail, "f_probe_for_handover(" & log_label & "): Expected none, but got RSL Handover Command. " |
| & log_label & ": " & log_descr); |
| } |
| |
| log("f_probe_for_handover(" & log_label & "): Ending the test: Handover Failure stops the procedure."); |
| /* osmo-bsc has triggered Handover. That's all we need to know for this test, reply with |
| * Handover Failure. */ |
| f_rsl_send_l3(ts_RRM_HandoverFailure('00'O)); |
| |
| /* target BTS is told to release lchan again; don't care which BTS nor what messages. */ |
| f_sleep(0.5); |
| RSL1.clear; |
| RSL2.clear; |
| log("f_probe_for_handover(" & log_label & "): done (got RSL Handover Command)"); |
| break; |
| } else { |
| repeat; |
| } |
| } |
| [] BSSAP.receive(tr_BSSMAP_HandoverRequired) { |
| if (expect_handover and is_inter_bsc_handover) { |
| setverdict(pass); |
| log("f_probe_for_handover(" & log_label & "): Got BSSMAP Handover Required as expected."); |
| } else { |
| setverdict(fail, "f_probe_for_handover(" & log_label & "): Expected none, but got BSSMAP Handover Required. " |
| & log_label & ": " & log_descr); |
| } |
| |
| log("f_probe_for_handover(" & log_label & "): done (got BSSMAP Handover Required)"); |
| |
| /* Note: f_tc_ho_neighbor_config_start() sets T7, the timeout for BSSMAP Handover Required, to |
| * 1 second. There is no legal way to quickly abort a handover after a BSSMAP Handover Required, |
| * setting a short timeout and waiting is the only way. */ |
| log("f_probe_for_handover(" & log_label & "): waiting for inter-BSC HO to time out..."); |
| f_sleep(1.5); |
| log("f_probe_for_handover(" & log_label & "): ...done"); |
| |
| break; |
| } |
| [] T.timeout { |
| if (expect_handover) { |
| setverdict(fail, "f_probe_for_handover(" & log_label & "): Expected Handover, but got none. " |
| & log_label & ": " & log_descr); |
| } else { |
| setverdict(pass); |
| log("f_probe_for_handover(" & log_label & "): Got no Handover, as expected."); |
| } |
| log("f_probe_for_handover(" & log_label & "): done (got no Handover)"); |
| break; |
| } |
| } |
| |
| f_rslem_resume(RSL1_PROC); |
| f_rslem_resume(RSL2_PROC); |
| f_sleep(3.0); |
| RSL.clear; |
| |
| log("f_probe_for_handover(" & log_label & "): done clearing"); |
| } |
| |
| /* Test the effect of various neighbor configuration scenarios: |
| * |
| * To avoid complexity, block off any actual handover operation, and always remain on the lchan at bts 0. |
| * Reconfigure the neighbors for bts 0, trigger a Handover, and probe whether osmo-bsc does or doesn't start HO. |
| */ |
| private function f_tc_ho_neighbor_config_start() runs on MSC_ConnHdlr { |
| g_pars := f_gen_test_hdlr_pars(); |
| var template PDU_BSSAP exp_compl := f_gen_exp_compl(); |
| var PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| const OCT8 kc := '0001020304050607'O; |
| |
| ass_cmd.pdu.bssmap.assignmentRequest.channelType := valueof(ts_BSSMAP_IE_ChannelType); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := valueof(ts_BSSMAP_IE_CodecList({ts_CodecFR})); |
| |
| /* Establish lchan at bts 0 */ |
| f_establish_fully(ass_cmd, exp_compl); |
| |
| /* Shorten the inter-BSC Handover timeout, to not wait so long for inter-BSC Handovers */ |
| f_vty_enter_cfg_network(BSCVTY); |
| f_vty_transceive(BSCVTY, "timer T7 1"); |
| f_vty_transceive(BSCVTY, "end"); |
| } |
| |
| private function f_tc_ho_neighbor_config_1(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 1. No 'neighbor' config"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors"}); |
| f_probe_for_handover("1.a", "HO to bts 1 works, implicitly listed as neighbor (legacy behavior when none are configured)", |
| "handover any to arfcn 871 bsic 11", |
| true); |
| |
| f_probe_for_handover("1.b", "HO to unknown cell does not start", |
| "handover any to arfcn 13 bsic 39", |
| false); |
| |
| f_probe_for_handover("1.c", "HO to 871-12 is ambiguous = error", |
| "handover any to arfcn 871 bsic 12", |
| false); |
| |
| f_probe_for_handover("1.d", "HO to 871-11 still works (verify that this test properly cleans up)", |
| "handover any to arfcn 871 bsic 11", |
| true); |
| } |
| testcase TC_ho_neighbor_config_1() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 60.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_1)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 1.a */ |
| /* "failed" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by sending a Handover Failure message. */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| |
| /* 1.b */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 1.c */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 1.d */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_neighbor_config_2(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 2. explicit local neighbor: 'neighbor bts 1'"); |
| f_bts_0_cfg(BSCVTY, {"neighbor bts 1"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("2.a", "HO to bts 1 works, explicitly listed as neighbor", |
| "handover any to arfcn 871 bsic 11", |
| true); |
| |
| f_probe_for_handover("2.b", "HO to bts 2 doesn't work, not listed as neighbor", |
| "handover any to arfcn 871 bsic 12", |
| false); |
| } |
| testcase TC_ho_neighbor_config_2() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 50.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_2)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 2.a */ |
| /* "failed" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by sending a Handover Failure message. */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| |
| /* 2.b */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_neighbor_config_3(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 3. explicit local neighbor: 'neighbor bts 2'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor bts 2"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("3.a", "HO to bts 1 doesn't work, not listed as neighbor", |
| "handover any to arfcn 871 bsic 11", |
| false); |
| f_probe_for_handover("3.b", "HO to bts 2 works, explicitly listed as neighbor; no ambiguity because bts 3 is not listed as neighbor", |
| "handover any to arfcn 871 bsic 12", |
| true); |
| } |
| testcase TC_ho_neighbor_config_3() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 50.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_3)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 3.a */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 3.b */ |
| /* "failed" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by sending a Handover Failure message. */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_neighbor_config_4(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 4. explicit remote neighbor: 'neighbor lac 99 arfcn 123 bsic 45'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor lac 99 arfcn 123 bsic 45"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("4.a", "HO to bts 1 doesn't work, not listed as neighbor", |
| "handover any to arfcn 871 bsic 11", |
| false); |
| f_probe_for_handover("4.b", "HO to bts 2 doesn't work, not listed as neighbor", |
| "handover any to arfcn 871 bsic 12", |
| false); |
| f_probe_for_handover("4.c", "HO to 123-45 triggers inter-BSC HO", |
| "handover any to arfcn 123 bsic 45", |
| true, true); |
| } |
| testcase TC_ho_neighbor_config_4() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 50.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_4)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 4.a */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 4.b */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| /* 4.c */ |
| /* "timeout" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by timing out after the Handover Required message */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_neighbor_config_5(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 5. explicit remote neighbor re-using ARFCN+BSIC: 'neighbor lac 99 arfcn 871 bsic 12'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor lac 99 arfcn 871 bsic 12"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("5.a", "HO to 871-12 triggers inter-BSC HO (ignoring local cells with same ARFCN+BSIC)", |
| "handover any to arfcn 871 bsic 12", |
| true, true); |
| } |
| testcase TC_ho_neighbor_config_5() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_5)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 5 */ |
| /* "timeout" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by timing out after the Handover Required message */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_neighbor_config_6(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 6. config error: explicit local and remote neighbors with ambiguous ARFCN+BSIC:" |
| & " 'neighbor bts 2; neighbor lac 99 arfcn 871 bsic 12'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor bts 2", "neighbor lac 99 arfcn 871 bsic 12"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("6.a", "HO to 871-12 is ambiguous = error", |
| "handover any to arfcn 871 bsic 12", |
| false); |
| } |
| testcase TC_ho_neighbor_config_6() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_6)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 6.a */ |
| /* "timeout" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by timing out after the Handover Required message */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:error"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| private function f_tc_ho_neighbor_config_7(charstring id) runs on MSC_ConnHdlr { |
| f_tc_ho_neighbor_config_start(); |
| |
| /* |
| * bts 0 ARFCN 871 BSIC 10 |
| * bts 1 ARFCN 871 BSIC 11 |
| * bts 2 ARFCN 871 BSIC 12 |
| * bts 3 ARFCN 871 BSIC 12 serves as ambiguity for bts 2, re-using the ARFCN+BSIC |
| */ |
| |
| log("f_tc_ho_neighbor_config: 7. explicit local and remote neighbors:" |
| & " 'neighbor bts 2; neighbor lac 99 arfcn 123 bsic 45'"); |
| f_bts_0_cfg(BSCVTY, {"no neighbors", "neighbor bts 2", "neighbor lac 99 arfcn 123 bsic 45"}); |
| f_sleep(0.5); |
| |
| f_probe_for_handover("7.a", "HO to 871-12 does HO to bts 2", |
| "handover any to arfcn 871 bsic 12", |
| true); |
| f_probe_for_handover("7.b", "HO to 123-45 triggers inter-BSC HO", |
| "handover any to arfcn 123 bsic 45", |
| true, true); |
| } |
| testcase TC_ho_neighbor_config_7() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| f_init(3, true, guard_timeout := 50.0); |
| f_sleep(1.0); |
| f_ctrs_bsc_and_bts_init(); |
| vc_conn := f_start_handler(refers(f_tc_ho_neighbor_config_7)); |
| vc_conn.done; |
| |
| /* f_tc_ho_neighbor_config_start() */ |
| f_ctrs_bsc_and_bts_add(0, "assignment:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "assignment:completed"); |
| |
| /* 7.a */ |
| /* "failed" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by sending a Handover Failure message. */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:failed"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "intra_bsc_ho:failed"); |
| |
| /* 7.b */ |
| /* "timeout" means a handover was triggered and started (which is all this test aims for) and the test ended the |
| * handover quickly by timing out after the Handover Required message */ |
| f_ctrs_bsc_and_bts_add(0, "handover:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "handover:timeout"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:attempted"); |
| f_ctrs_bsc_and_bts_add(0, "interbsc_ho_out:timeout"); |
| |
| f_ctrs_bsc_and_bts_verify(); |
| } |
| |
| /* OS#3041: Open and close N connections in a normal fashion, and expect no |
| * BSSMAP Reset just because of that. */ |
| testcase TC_bssap_rlsd_does_not_cause_bssmap_reset() runs on test_CT { |
| var default d; |
| var integer i; |
| var DchanTuple dt; |
| |
| f_init(); |
| |
| /* Wait for initial BSSMAP Reset to pass */ |
| f_sleep(4.0); |
| |
| d := activate(no_bssmap_reset()); |
| |
| /* Setup up a number of connections and RLSD them again from the MSC |
| * side. In the buggy behavior, the fourth one triggers BSSMAP Reset. |
| * Let's do it some more times for good measure. */ |
| for (i := 0; i < 4; i := i+1) { |
| /* Since we're doing a lot of runs, give each one a fresh |
| * T_guard from the top. */ |
| T_guard.start; |
| |
| /* Setup a BSSAP connection and clear it right away. This is |
| * the MSC telling the BSC about a planned release, it's not an |
| * erratic loss of a connection. */ |
| dt := f_est_dchan(int2oct(i,1), 23+i, '00010203040506'O); |
| |
| /* MSC disconnects (RLSD). */ |
| BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); |
| } |
| |
| /* In the buggy behavior, a timeout of 2 seconds happens between above |
| * trigger (logs "SIGTRAN connection down, reconnecting...") and the |
| * actual BSSMAP Reset. Wait a bit longer just to make sure. */ |
| f_sleep(4.0); |
| |
| deactivate(d); |
| f_shutdown_helper(); |
| } |
| |
| /* OS#3041: Open and close N connections in a normal fashion, and expect no |
| * BSSMAP Reset just because of that. Invoke the release by a BSSMAP Clear from |
| * the MSC. */ |
| testcase TC_bssmap_clear_does_not_cause_bssmap_reset() runs on test_CT { |
| var default d; |
| var integer i; |
| var DchanTuple dt; |
| var BSSAP_N_DATA_ind rx_di; |
| var myBSSMAP_Cause cause_val := GSM0808_CAUSE_CALL_CONTROL; |
| var BssmapCause cause := enum2int(cause_val); |
| |
| f_init(); |
| |
| /* Wait for initial BSSMAP Reset to pass */ |
| f_sleep(4.0); |
| |
| d := activate(no_bssmap_reset()); |
| |
| /* Setup up a number of connections and RLSD them again from the MSC |
| * side. In the buggy behavior, the fourth one triggers BSSMAP Reset. |
| * Let's do it some more times for good measure. */ |
| for (i := 0; i < 8; i := i+1) { |
| /* Since we're doing a lot of runs, give each one a fresh |
| * T_guard from the top. */ |
| T_guard.start; |
| |
| /* Setup a BSSAP connection and clear it right away. This is |
| * the MSC telling the BSC about a planned release, it's not an |
| * erratic loss of a connection. */ |
| dt := f_est_dchan(int2oct(i,1), 23+i, '00010203040506'O); |
| |
| /* Instruct BSC to clear channel */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect BSC to disable the channel */ |
| f_exp_chan_rel_and_clear(dt, 0); |
| } |
| |
| /* In the buggy behavior, a timeout of 2 seconds happens between above |
| * trigger (logs "SIGTRAN connection down, reconnecting...") and the |
| * actual BSSMAP Reset. Wait a bit longer just to make sure. */ |
| f_sleep(4.0); |
| |
| deactivate(d); |
| f_shutdown_helper(); |
| } |
| |
| /* OS#3041: Open and close N connections in a normal fashion, and expect no |
| * BSSMAP Reset just because of that. Close connections from the MS side with a |
| * Release Ind on RSL. */ |
| testcase TC_ms_rel_ind_does_not_cause_bssmap_reset() runs on test_CT { |
| var default d; |
| var integer i; |
| var DchanTuple dt; |
| var BSSAP_N_DATA_ind rx_di; |
| var integer j; |
| |
| f_init(); |
| |
| /* Wait for initial BSSMAP Reset to pass */ |
| f_sleep(4.0); |
| |
| d := activate(no_bssmap_reset()); |
| |
| /* Setup up a number of connections and RLSD them again from the MSC |
| * side. In the buggy behavior, the fourth one triggers BSSMAP Reset. |
| * Let's do it some more times for good measure. */ |
| for (i := 0; i < 8; i := i+1) { |
| /* Since we're doing a lot of runs, give each one a fresh |
| * T_guard from the top. */ |
| T_guard.start; |
| |
| /* Setup a BSSAP connection and clear it right away. This is |
| * the MSC telling the BSC about a planned release, it's not an |
| * erratic loss of a connection. */ |
| dt := f_est_dchan('23'O, 23, '00010203040506'O); |
| |
| /* simulate RLL REL IND */ |
| f_ipa_tx(0, ts_RSL_REL_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); |
| |
| /* expect Clear Request on MSC side */ |
| BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_di; |
| |
| /* Instruct BSC to clear channel */ |
| var BssmapCause cause := bit2int(rx_di.userData.pdu.bssmap.clearRequest.cause.causeValue); |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); |
| |
| /* expect BSC to disable the channel */ |
| f_exp_chan_rel_and_clear(dt, 0); |
| } |
| |
| /* In the buggy behavior, a timeout of 2 seconds happens between above |
| * trigger (logs "SIGTRAN connection down, reconnecting...") and the |
| * actual BSSMAP Reset. Wait a bit longer just to make sure. */ |
| f_sleep(4.0); |
| |
| deactivate(d); |
| f_shutdown_helper(); |
| } |
| |
| /*********************************************************************** |
| * IPA style dynamic PDCH |
| ***********************************************************************/ |
| |
| private function f_dyn_ipa_pdch_act(integer bts_nr, integer trx_nr, integer ts_nr, |
| template (omit) RSL_Cause nack := omit) |
| runs on test_CT { |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(ts_nr)); |
| var RSL_Message rsl_unused; |
| /* ask BSC via VTY to activate a given IPA style chan as PDCH */ |
| f_vty_ts_action("pdch activate", bts_nr, trx_nr, ts_nr); |
| /* expect the BSC to issue the related RSL command */ |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_IPA_PDCH_ACT(chan_nr)); |
| if (istemplatekind(nack, "omit")) { |
| /* respond with a related acknowledgement */ |
| f_ipa_tx(0, ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); |
| } else { |
| f_ipa_tx(0, ts_RSL_IPA_PDCH_ACT_NACK(chan_nr, valueof(nack))); |
| } |
| } |
| |
| private function f_dyn_ipa_pdch_deact(integer bts_nr, integer trx_nr, integer ts_nr, |
| template (omit) RSL_Cause nack := omit) |
| runs on test_CT { |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(ts_nr)); |
| var RSL_Message rsl_unused; |
| /* ask BSC via VTY to activate a given IPA style chan as PDCH */ |
| f_vty_ts_action("pdch deactivate", bts_nr, trx_nr, ts_nr); |
| /* expect the BSC to issue the related RSL command */ |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_IPA_PDCH_DEACT(chan_nr)); |
| if (istemplatekind(nack, "omit")) { |
| /* respond with a related acknowledgement */ |
| f_ipa_tx(0, ts_RSL_IPA_PDCH_DEACT_ACK(chan_nr)); |
| } else { |
| f_ipa_tx(0, ts_RSL_IPA_PDCH_DEACT_NACK(chan_nr, valueof(nack))); |
| } |
| } |
| |
| private function f_ts_dyn_mode_get(integer bts_nr, integer trx_nr, integer ts_nr) |
| runs on test_CT return charstring { |
| var charstring cmd, resp; |
| cmd := "show timeslot "&int2str(bts_nr)&" "&int2str(trx_nr)&" "&int2str(ts_nr); |
| return f_vty_transceive_match_regexp_retry(BSCVTY, cmd, "*\((*)\)*", 0, 4, 1.0); |
| } |
| |
| private function f_ts_dyn_mode_assert(integer bts_nr, integer trx_nr, integer ts_nr, |
| template charstring exp) |
| runs on test_CT { |
| var charstring mode := f_ts_dyn_mode_get(bts_nr, trx_nr, ts_nr); |
| if (not match(mode, exp)) { |
| setverdict(fail, "Unexpected TS Mode: ", mode); |
| mtc.stop; |
| } |
| } |
| |
| private function f_ts_set_chcomb(integer bts_nr, integer trx_nr, integer ts_nr, charstring chcomb) |
| runs on test_CT { |
| f_vty_enter_cfg_ts(BSCVTY, bts_nr, trx_nr, ts_nr); |
| f_vty_transceive(BSCVTY, "phys_chan_config " & chcomb); |
| f_vty_transceive(BSCVTY, "end"); |
| } |
| |
| private const charstring TCHF_MODE := "TCH/F mode"; |
| private const charstring TCHH_MODE := "TCH/H mode"; |
| private const charstring PDCH_MODE := "PDCH mode"; |
| private const charstring NONE_MODE := "NONE mode"; |
| |
| /* Test IPA PDCH activation / deactivation triggered by VTY */ |
| testcase TC_dyn_pdch_ipa_act_deact() runs on test_CT { |
| var RSL_Message rsl_unused; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(6)); |
| |
| log("TCH/F_PDCH pchan starts out in TCH/F mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_IPA_PDCH_ACT(chan_nr)); |
| f_ipa_tx(0, ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); |
| f_sleep(1.0); |
| log("TCH/F_PDCH pchan, PDCH ACT was ACKed, so now in PDCH mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); |
| |
| /* De-activate it via VTY */ |
| f_dyn_ipa_pdch_deact(0, 0, chan_nr.tn); |
| f_sleep(1.0); |
| log("TCH/F_PDCH pchan, PDCH DEACT via VTY, so now back in TCH/F mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| |
| /* re-activate it via VTY */ |
| f_dyn_ipa_pdch_act(0, 0, chan_nr.tn); |
| f_sleep(1.0); |
| log("TCH/F_PDCH pchan, PDCH ACT via VTY, so now in PDCH mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); |
| |
| /* and finally de-activate it again */ |
| f_dyn_ipa_pdch_deact(0, 0, chan_nr.tn); |
| f_sleep(1.0); |
| log("TCH/F_PDCH pchan, PDCH DEACT via VTY, so now back in TCH/F mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| setverdict(pass); |
| } |
| |
| /* Test IPA PDCH activation NACK */ |
| testcase TC_dyn_pdch_ipa_act_nack() runs on test_CT { |
| var RSL_Message rsl_unused; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(6)); |
| |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_IPA_PDCH_ACT(chan_nr)); |
| f_ipa_tx(0, ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); |
| |
| /* De-activate it via VTY */ |
| f_dyn_ipa_pdch_deact(0, 0, chan_nr.tn); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| |
| /* re-activate it via VTY, but fail that; check BSC still assumes TCH/F mode */ |
| f_dyn_ipa_pdch_act(0, 0, chan_nr.tn, RSL_ERR_EQUIPMENT_FAIL); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| setverdict(pass); |
| } |
| |
| |
| /*********************************************************************** |
| * Osmocom style dynamic PDCH |
| ***********************************************************************/ |
| |
| private function f_dyn_osmo_pdch_act(integer bts_nr, integer trx_nr, integer ts_nr, |
| template (omit) RSL_Cause nack := omit) |
| runs on test_CT { |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(ts_nr)); |
| var RSL_Message rsl_unused; |
| /* ask BSC via VTY to activate a given IPA style chan as PDCH */ |
| /* FIXME: no VTY command to activate Osmocom PDCH !! */ |
| /* expect the BSC to issue the related RSL command */ |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT(chan_nr, ?)); |
| if (istemplatekind(nack, "omit")) { |
| /* respond with a related acknowledgement */ |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); |
| } else { |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_NACK(chan_nr, valueof(nack))); |
| } |
| } |
| |
| private function f_dyn_osmo_pdch_deact(integer bts_nr, integer trx_nr, integer ts_nr, |
| template (omit) RSL_Cause nack := omit) |
| runs on test_CT { |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(ts_nr)); |
| var RSL_Message rsl_unused; |
| /* ask BSC via VTY to activate a given IPA style chan as PDCH */ |
| /* FIXME: no VTY command to activate Osmocom PDCH !! */ |
| /* expect the BSC to issue the related RSL command */ |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_RF_CHAN_REL(chan_nr)); |
| if (istemplatekind(nack, "omit")) { |
| /* respond with a related acknowledgement */ |
| f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(chan_nr)); |
| } else { |
| //f_ipa_tx(0, ts_RSL_RF_CHAN_REL_NACK(chan_nr, valueof(nack))); |
| } |
| } |
| |
| /* Test Osmocom dyn PDCH activation / deactivation triggered by VTY */ |
| testcase TC_dyn_pdch_osmo_act_deact() runs on test_CT { |
| var RSL_Message rsl_unused; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_TCH/H_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| |
| log("TCH/F_TCH/H_PDCH pchan starts out in disabled mode:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr, ?)); |
| |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); |
| f_sleep(1.0); |
| log("TCH/F_TCH/H_PDCH requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| setverdict(pass); |
| } |
| |
| /* Test Osmocom dyn PDCH activation NACK behavior */ |
| testcase TC_dyn_pdch_osmo_act_nack() runs on test_CT { |
| var RSL_Message rsl_unused; |
| |
| /* change Timeslot 6 before f_init() starts RSL */ |
| f_init_vty(); |
| f_ts_set_chcomb(0, 0, 6, "TCH/F_TCH/H_PDCH"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1, false); |
| f_sleep(1.0); |
| |
| var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(6)); |
| |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); |
| /* The BSC will activate the dynamic PDCH by default, so confirm that */ |
| rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr, ?)); |
| |
| /* NACK this activation and expect the "show timeslot" mode still to be NONE */ |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_NACK(chan_nr, RSL_ERR_EQUIPMENT_FAIL)); |
| f_sleep(1.0); |
| f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); |
| |
| /* clean up config */ |
| f_ts_set_chcomb(0, 0, 6, "PDCH"); |
| |
| setverdict(pass); |
| } |
| |
| testcase TC_chopped_ipa_ping() runs on test_CT { |
| const Integers bsc_ipa_ports := {mp_bsc_rsl_port, mp_bsc_oml_port, mp_bsc_ctrl_port}; |
| for (var integer i := 0; i < lengthof(bsc_ipa_ports); i := i + 1) { |
| IPA_Testing.f_run_TC_chopped_ipa_ping(mp_bsc_ip, bsc_ipa_ports[i], CONNECT_TO_SERVER); |
| } |
| } |
| |
| testcase TC_chopped_ipa_payload() runs on test_CT { |
| const Integers bsc_ipa_ports := {mp_bsc_rsl_port, mp_bsc_oml_port |
| /* TODO: mp_bsc_ctrl_port does not work yet */}; |
| for (var integer i := 0; i < lengthof(bsc_ipa_ports); i := i + 1) { |
| IPA_Testing.f_run_TC_chopped_ipa_payload(mp_bsc_ip, bsc_ipa_ports[i], CONNECT_TO_SERVER); |
| } |
| } |
| |
| /* Verify the BSC sends the MS Power Parameters IE during CHAN ACT to make sure |
| the BTS does autonomous MS power control loop */ |
| testcase TC_assignment_verify_ms_power_params_ie() runs on test_CT { |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| //pars.encr := valueof(t_EncrParams('01'O, f_rnd_octstring(8))); |
| pars.exp_ms_power_params := true; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| vc_conn := f_start_handler(refers(f_tc_assignment_fr_a5), pars); |
| vc_conn.done; |
| } |
| |
| /*********************************************************************** |
| * MSC Pooling |
| ***********************************************************************/ |
| |
| function f_tmsi_nri(integer nri_v, octetstring base_tmsi := '42000023'O, integer nri_bitlen := 10) return octetstring |
| { |
| return int2oct( oct2int(base_tmsi) + bit2int( (int2bit(nri_v, 32) << ( 24 - nri_bitlen)) ), |
| 4); |
| } |
| |
| template MobileIdentityLV ts_MI_TMSI_NRI_LV(integer nri_v, integer nri_bitlen := 10) := |
| ts_MI_TMSI_LV(tmsi := f_tmsi_nri(nri_v, nri_bitlen := nri_bitlen)); |
| |
| private function f_perform_clear(RSL_DCHAN_PT rsl) runs on MSC_ConnHdlr { |
| f_logp("MSC instructs BSC to clear channel"); |
| BSSAP.send(ts_BSSMAP_ClearCommand(0)); |
| interleave { |
| [] rsl.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE)) { |
| f_logp("Got RSL RR Release"); |
| } |
| [] rsl.receive(tr_RSL_DEACT_SACCH(g_chan_nr)) { |
| f_logp("Got RSL Deact SACCH"); |
| } |
| [] BSSAP.receive(tr_BSSMAP_ClearComplete) { |
| f_logp("Got BSSMAP Clear Complete"); |
| /* Also drop the SCCP connection */ |
| BSSAP.send(RAN_Conn_Prim:MSC_CONN_PRIM_DISC_REQ); |
| } |
| [] rsl.receive(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL)) { |
| f_logp("Got RSL RF Chan Rel, sending Rel Ack"); |
| rsl.send(ts_RSL_RF_CHAN_REL_ACK(g_chan_nr)); |
| } |
| } |
| } |
| |
| private function f_perform_compl_l3(RSL_DCHAN_PT rsl, template PDU_ML3_MS_NW l3_info, boolean do_clear := true) |
| runs on MSC_ConnHdlr { |
| timer T := 10.0; |
| var octetstring l3_enc := enc_PDU_ML3_MS_NW(valueof(l3_info)); |
| |
| f_logp("establish channel, send Complete Layer 3 Info"); |
| f_create_bssmap_exp(l3_enc); |
| |
| /* RSL_Emulation.f_chan_est() on rsl: |
| * This is basically code dup with s/RSL/rsl from: |
| * RSL_Emulation.f_chan_est(g_pars.ra, l3_enc, g_pars.link_id, g_pars.fn); |
| */ |
| var RSL_Message rx_rsl; |
| var GsmRrMessage rr; |
| |
| /* request a channel to be established */ |
| rsl.send(ts_RSLDC_ChanRqd(g_pars.ra, g_pars.fn)); |
| /* expect immediate assignment. |
| * Code dup with s/RSL/rsl from: |
| * rx_rsl := f_rx_or_fail(tr_RSL_IMM_ASSIGN); |
| */ |
| timer Tt := 10.0; |
| |
| /* request a channel to be established */ |
| Tt.start; |
| alt { |
| [] rsl.receive(tr_RSL_IMM_ASSIGN) -> value rx_rsl { |
| Tt.stop; |
| } |
| [] rsl.receive { |
| setverdict(fail, "Unexpected RSL message on DCHAN"); |
| mtc.stop; |
| } |
| [] Tt.timeout { |
| setverdict(fail, "Timeout waiting for RSL on DCHAN"); |
| mtc.stop; |
| } |
| } |
| rr := dec_GsmRrMessage(rx_rsl.ies[1].body.full_imm_ass_info.payload); |
| g_chan_nr := rr.payload.imm_ass.chan_desc.chan_nr; |
| rsl.send(ts_RSL_EST_IND(g_chan_nr, valueof(g_pars.link_id), l3_enc)); |
| |
| |
| f_logp("expect BSSAP Complete Layer 3 Info at MSC"); |
| var template PDU_BSSAP exp_l3_compl; |
| exp_l3_compl := tr_BSSMAP_ComplL3() |
| if (g_pars.aoip == false) { |
| exp_l3_compl.pdu.bssmap.completeLayer3Information.codecList := omit; |
| } else { |
| exp_l3_compl.pdu.bssmap.completeLayer3Information.codecList := ?; |
| } |
| |
| var PDU_BSSAP bssap; |
| T.start; |
| alt { |
| [] BSSAP.receive(exp_l3_compl) -> value bssap { |
| f_logp("received expected Complete Layer 3 Info at MSC"); |
| log("rx exp_l3_compl = ", bssap); |
| } |
| [] BSSAP.receive(tr_BSSMAP_ComplL3) { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, "Received non-matching COMPLETE LAYER 3 INFORMATION"); |
| } |
| [] T.timeout { |
| Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, "Timeout waiting for COMPLETE LAYER 3 INFORMATION"); |
| } |
| } |
| |
| /* start ciphering, if requested */ |
| if (ispresent(g_pars.encr)) { |
| f_logp("start ciphering"); |
| f_cipher_mode(g_pars.encr.enc_alg, g_pars.encr.enc_key); |
| } |
| |
| if (do_clear) { |
| f_perform_clear(rsl); |
| } |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| |
| private function f_tc_mscpool_compl_l3(charstring id) runs on MSC_ConnHdlr { |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| if (g_pars.mscpool.rsl_idx == 0) { |
| f_perform_compl_l3(RSL, g_pars.mscpool.l3_info); |
| } else if (g_pars.mscpool.rsl_idx == 1) { |
| f_perform_compl_l3(RSL1, g_pars.mscpool.l3_info); |
| } else if (g_pars.mscpool.rsl_idx == 2) { |
| f_perform_compl_l3(RSL2, g_pars.mscpool.l3_info); |
| } |
| } |
| |
| /* Various Complete Layer 3 by IMSI all end up with the first MSC, because the other MSCs are not connected. */ |
| private function f_tc_mscpool_L3Compl_on_1_msc(charstring id) runs on MSC_ConnHdlr { |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| f_perform_compl_l3(RSL, ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000000001'H)), '00F110'O) ); |
| f_perform_compl_l3(RSL, ts_CM_SERV_REQ(CM_TYPE_MO_SMS, valueof(ts_MI_IMSI_LV('001010000000002'H))) ); |
| f_perform_compl_l3(RSL, ts_PAG_RESP(valueof(ts_MI_IMSI_LV('001010000000003'H))) ); |
| f_perform_compl_l3(RSL, ts_ML3_MO_MM_IMSI_DET_Ind(valueof(ts_MI_IMSI_LV('001010000000004'H))) ); |
| } |
| testcase TC_mscpool_L3Compl_on_1_msc() runs on test_CT { |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| var MSC_ConnHdlr vc_conn; |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| |
| f_ctrs_msc_init(); |
| |
| vc_conn := f_start_handler(refers(f_tc_mscpool_L3Compl_on_1_msc), pars); |
| vc_conn.done; |
| |
| f_ctrs_msc_expect(0, "mscpool:subscr:new", 4); |
| } |
| |
| /* Three Layer 3 Complete by IMSI are round-robin'ed across two connected MSCs */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_imsi_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000000001'H)), '00F110'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV('001010000000002'H)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:new"); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_IMSI_LV('001010000000003'H)))); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| } |
| |
| /* Three LU by TMSI are round-robin'ed across two connected MSCs, because they contain the NULL-NRI 0 |
| * (configured in osmo-bsc.cfg). */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_LU_by_tmsi_null_nri_0_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(0)), '00F110'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:reattach"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(0)), '00F110'O)); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:reattach"); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(0)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:reattach"); |
| } |
| |
| /* Three LU by TMSI are round-robin'ed across two connected MSCs, because they contain the NULL-NRI 1 |
| * (configured in osmo-bsc.cfg). In this case, one of the MSC also has the NULL-NRI as part of its owned NRIs, but the |
| * NULL-NRI setting is stronger than that. */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_LU_by_tmsi_null_nri_1_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(1)), '00F110'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:reattach"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(1)), '00F110'O)); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:reattach"); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(1)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:reattach"); |
| } |
| |
| /* Three Layer 3 Complete by TMSI are round-robin'ed across two connected MSCs, because they contain an NRI not |
| * assigned to any MSC (configured in osmo-bsc.cfg). */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_tmsi_unassigned_nri_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI that is not assigned to any MSC */ |
| pars1.mscpool.l3_info := valueof(ts_ML3_MO_MM_IMSI_DET_Ind(valueof(ts_MI_TMSI_NRI_LV(1023)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| /* An NRI that is not assigned to any MSC */ |
| pars2.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(768)), '00F110'O)); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:new"); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| /* An NRI that is not assigned to any MSC */ |
| pars3.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_SS_ACT, valueof(ts_MI_TMSI_NRI_LV(819)))); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| } |
| |
| /* Three Layer 3 Complete by TMSI are round-robin'ed across two connected MSCs, because they contain an NRI |
| * assigned to an MSC that is currently not connected (configured in osmo-bsc.cfg). */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_tmsi_valid_nri_msc_not_connected_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI that is assigned to an unconnected MSC */ |
| pars1.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_TMSI_NRI_LV(512)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_add(2, "mscpool:subscr:attach_lost"); |
| f_ctrs_msc_add(0, "mscpool:subscr:new"); |
| f_ctrs_msc_verify(); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| /* An NRI that is assigned to an unconnected MSC */ |
| pars2.mscpool.l3_info := valueof(ts_ML3_MO_MM_IMSI_DET_Ind(valueof(ts_MI_TMSI_NRI_LV(767)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_add(2, "mscpool:subscr:attach_lost"); |
| f_ctrs_msc_add(1, "mscpool:subscr:new"); |
| f_ctrs_msc_verify(); |
| |
| /* Test round-robin wrap to the first MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| /* An NRI that is assigned to an unconnected MSC */ |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(750)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_add(2, "mscpool:subscr:attach_lost"); |
| f_ctrs_msc_add(0, "mscpool:subscr:new"); |
| f_ctrs_msc_verify(); |
| } |
| |
| /* Three Layer 3 Complete by TMSI with valid NRI for the second MSC are all directed to the second MSC (configured in |
| * osmo-bsc.cfg). */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_tmsi_valid_nri_1() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 2); |
| f_sleep(1.0); |
| |
| /* All TMSIs in this test point at the second MSC, set the round robin to point at the first MSC to make sure |
| * this is not using round-robin. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI of the second MSC's range (256-511) */ |
| pars1.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_SMS, valueof(ts_MI_TMSI_NRI_LV(256)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:known"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars2.mscpool.rsl_idx := 1; |
| /* An NRI of the second MSC's range (256-511) */ |
| pars2.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_TMSI_NRI_LV(260)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:known"); |
| |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars3.mscpool.rsl_idx := 2; |
| /* An NRI of the second MSC's range (256-511) */ |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(511)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:known"); |
| } |
| |
| /* Layer 3 Complete by TMSI with valid NRI for the third MSC are directed to the third MSC (configured in osmo-bsc.cfg), |
| * while a round-robin remains unaffected by that. */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_L3Complete_by_tmsi_valid_nri_2() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* All TMSIs in this test point at the third MSC, set the round robin to point at the second MSC to make sure |
| * this is not using round-robin. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 1"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI of the third MSC's range (512-767) */ |
| pars1.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_SMS, valueof(ts_MI_TMSI_NRI_LV(512)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:known"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars2.mscpool.rsl_idx := 1; |
| /* An NRI of the third MSC's range (512-767) */ |
| pars2.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_TMSI_NRI_LV(678)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:known"); |
| |
| /* The above forwardings to third MSC have not affected the round robin, which still points at the second MSC */ |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000000013'H)), '00F110'O)); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:new"); |
| } |
| |
| /* LU with a TMSI but indicating a different PLMN in its previous LAI: ignore the NRI. */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_LU_by_tmsi_from_other_PLMN() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* The TMSIs in this test points at the second MSC, but since it is from a different PLMN, round-robin is used |
| * instead, and hits msc 0. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| /* An NRI of the second MSC's range (256-511), but a PLMN that doesn't match with osmo-bsc.cfg */ |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(260)), '99F999'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| /* An NRI of the third MSC's range (512-767) and a matching PLMN gets directed by NRI. */ |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_TMSI_NRI_LV(555)), '00F110'O)); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:known"); |
| } |
| |
| /* Make sure that whichever MSC paged a subscriber will also get the Paging Response. Page by IMSI, which would be |
| * round-robined to another MSC, to make sure the Paging->Response relation is stronger than the NRI->MSC mapping. */ |
| private function f_tc_mscpool_paging_imsi(charstring id) runs on MSC_ConnHdlr { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list := { cIl_CI := { ts_BSSMAP_CI_CI(0) } }; |
| //cid_list := { cIl_allInBSS := ''O }; |
| var RSL_ChanNeeded rsl_chneed := RSL_CHANNEED_SDCCH; |
| var template BSSMAP_IE_ChannelNeeded bssmap_chneed := ts_BSSMAP_IE_ChanNeeded(int2bit(enum2int(valueof(rsl_chneed)),2)); |
| var BSSAP_N_UNITDATA_req paging; |
| var hexstring imsi := '001010000000123'H; |
| |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| |
| paging := valueof(ts_BSSAP_UNITDATA_req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| valueof(ts_BSSMAP_Paging(imsi, cid_list, omit, bssmap_chneed)))); |
| BSSAP.send(paging); |
| |
| /* Register any RSL conn so that the Paging Command gets received here. With the current RSL_Emulation's main() |
| * handling of '[bts_role] IPA_PT.receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD()))' it doesn't matter at all which |
| * channel number is picked here. */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(0, RSL_CHAN_NR_INVALID)); |
| f_rslem_register(0, new_chan_nr); |
| RSL.receive(tr_RSL_PAGING_CMD(tr_MI_IMSI(imsi))); |
| f_rslem_unregister(0, new_chan_nr); |
| |
| /* Despite the round robin pointing at the second MSC ('roundrobin next 1'), the earlier Paging for the same IMSI |
| * causes this Paging Response to go to the first MSC (bssap_idx := 0). */ |
| f_perform_compl_l3(RSL, ts_PAG_RESP(valueof(ts_MI_IMSI_LV(imsi))) ); |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_mscpool_paging_and_response_imsi() runs on test_CT { |
| f_init(nr_bts := 1, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* Testing a Paging on the first MSC to get a Paging Response back to the first MSC. Set round robin to the |
| * second MSC to make sure we're getting the Paging logic, not a coincidental round robin match. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 1"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.sccp_addr_bsc := g_bssap[pars1.mscpool.bssap_idx].sccp_addr_peer; |
| pars1.sccp_addr_msc := g_bssap[pars1.mscpool.bssap_idx].sccp_addr_own; |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_paging_imsi), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:paged"); |
| } |
| |
| /* Make sure that whichever MSC paged a subscriber will also get the Paging Response. Page by TMSI with an NRI value |
| * that matches a different MSC, to make sure the Paging->Response relation is stronger than the NRI->MSC mapping. */ |
| private function f_tc_mscpool_paging_tmsi(charstring id) runs on MSC_ConnHdlr { |
| var template BSSMAP_FIELD_CellIdentificationList cid_list := { cIl_CI := { ts_BSSMAP_CI_CI(0) } }; |
| //cid_list := { cIl_allInBSS := ''O }; |
| var RSL_ChanNeeded rsl_chneed := RSL_CHANNEED_SDCCH; |
| var template BSSMAP_IE_ChannelNeeded bssmap_chneed := ts_BSSMAP_IE_ChanNeeded(int2bit(enum2int(valueof(rsl_chneed)),2)); |
| var integer nri_v := 300; /* <-- second MSC's NRI */ |
| var octetstring tmsi := f_tmsi_nri(nri_v); |
| var BSSAP_N_UNITDATA_req paging; |
| |
| f_MscConnHdlr_init(g_pars.media_nr, "127.0.0.2", "127.0.0.3", FR_AMR); |
| |
| paging := valueof(ts_BSSAP_UNITDATA_req(g_pars.sccp_addr_bsc, g_pars.sccp_addr_msc, |
| valueof(ts_BSSMAP_Paging('001010000000011'H, cid_list, tmsi, bssmap_chneed)))); |
| BSSAP.send(paging); |
| |
| /* Register any RSL conn so that the Paging Command gets received here. With the current RSL_Emulation's main() |
| * handling of '[bts_role] IPA_PT.receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD()))' it doesn't matter at all which |
| * channel number is picked here. */ |
| var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(0, RSL_CHAN_NR_INVALID)); |
| f_rslem_register(0, new_chan_nr); |
| RSL.receive(tr_RSL_PAGING_CMD(t_MI_TMSI(tmsi))); |
| f_rslem_unregister(0, new_chan_nr); |
| |
| /* Despite the NRI matching the second MSC (NRI from 'msc 1' in osmo-bsc.cfg) and round robin pointing at the |
| * third MSC ('roundrobin next 2'), the earlier Paging for the same TMSI causes this Paging Response to go to |
| * the first MSC (bssap_idx := 0). */ |
| f_perform_compl_l3(RSL, ts_PAG_RESP(valueof(ts_MI_TMSI_NRI_LV(nri_v))) ); |
| setverdict(pass); |
| f_sleep(1.0); |
| } |
| testcase TC_mscpool_paging_and_response_tmsi() runs on test_CT { |
| f_init(nr_bts := 1, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* Testing a Paging on the first MSC to get a Paging Response back to the first MSC. Set round robin to the |
| * third MSC to make sure we're getting the Paging logic, not a coincidental round robin match. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 2"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.sccp_addr_bsc := g_bssap[pars1.mscpool.bssap_idx].sccp_addr_peer; |
| pars1.sccp_addr_msc := g_bssap[pars1.mscpool.bssap_idx].sccp_addr_own; |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_paging_tmsi), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:paged"); |
| } |
| |
| /* For round-robin, skip an MSC that has 'no allow-attach' set. */ |
| /* FIXME: each run is using a separate RSLem: RSL, RSL1, RSL2. It should work |
| * just as well using only RSL. */ |
| testcase TC_mscpool_no_allow_attach_round_robin() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| /* Mark the second MSC as offloading, round-robin should skip this MSC now. */ |
| f_vty_msc_allow_attach(BSCVTY, {true, false, true}); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars1.mscpool.rsl_idx := 0; |
| pars1.mscpool.l3_info := valueof(ts_LU_REQ(LU_Type_IMSI_Attach, valueof(ts_MI_IMSI_LV('001010000000001'H)), '00F110'O)); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV('001010000000002'H)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_PAG_RESP(valueof(ts_MI_IMSI_LV('001010000000003'H)))); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| } |
| |
| /* An MSC that has 'no allow-attach' set should still serve subscribers that are already attached according to their |
| * TMSI NRI. */ |
| testcase TC_mscpool_no_allow_attach_valid_nri() runs on test_CT { |
| |
| f_init(nr_bts := 3, handler_mode := true, nr_msc := 3); |
| f_sleep(1.0); |
| |
| /* Mark the second MSC as offloading, round-robin should skip this MSC now. */ |
| f_vty_msc_allow_attach(BSCVTY, {true, false, true}); |
| |
| /* Control which MSC gets chosen next by the round-robin, otherwise |
| * would be randomly affected by which other tests ran before this. */ |
| f_vty_transceive(BSCVTY, "mscpool roundrobin next 0"); |
| |
| f_ctrs_msc_init(); |
| |
| /* Round robin points at msc 0, but the valid NRI directs to msc 1, even though msc 1 has 'no allow-attach'. */ |
| var MSC_ConnHdlr vc_conn1; |
| var TestHdlrParams pars1 := f_gen_test_hdlr_pars(bssap_idx := 1); |
| pars1.mscpool.rsl_idx := 0; |
| /* An NRI of the second MSC's range (256-511) */ |
| pars1.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_TMSI_NRI_LV(260)))); |
| vc_conn1 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars1); |
| vc_conn1.done; |
| f_ctrs_msc_expect(1, "mscpool:subscr:known"); |
| |
| var MSC_ConnHdlr vc_conn2; |
| var TestHdlrParams pars2 := f_gen_test_hdlr_pars(bssap_idx := 0); |
| pars2.mscpool.rsl_idx := 1; |
| pars2.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV('001010000000002'H)))); |
| vc_conn2 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars2); |
| vc_conn2.done; |
| f_ctrs_msc_expect(0, "mscpool:subscr:new"); |
| |
| var MSC_ConnHdlr vc_conn3; |
| var TestHdlrParams pars3 := f_gen_test_hdlr_pars(bssap_idx := 2); |
| pars3.mscpool.rsl_idx := 2; |
| pars3.mscpool.l3_info := valueof(ts_CM_SERV_REQ(CM_TYPE_MO_CALL, valueof(ts_MI_IMSI_LV('001010000000003'H)))); |
| vc_conn3 := f_start_handler(refers(f_tc_mscpool_compl_l3), pars3); |
| vc_conn3.done; |
| f_ctrs_msc_expect(2, "mscpool:subscr:new"); |
| } |
| |
| /* Allow/Deny emergency calls globally via VTY */ |
| private function f_vty_allow_emerg_msc(boolean allow) runs on test_CT { |
| f_vty_enter_cfg_msc(BSCVTY, 0); |
| if (allow) { |
| f_vty_transceive(BSCVTY, "allow-emergency allow"); |
| } else { |
| f_vty_transceive(BSCVTY, "allow-emergency deny"); |
| } |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| /* Allow/Deny emergency calls per BTS via VTY */ |
| private function f_vty_allow_emerg_bts(boolean allow, integer bts_nr) runs on test_CT { |
| f_vty_enter_cfg_bts(BSCVTY, bts_nr); |
| if (allow) { |
| f_vty_transceive(BSCVTY, "rach emergency call allowed 1"); |
| } else { |
| f_vty_transceive(BSCVTY, "rach emergency call allowed 0"); |
| } |
| f_vty_transceive(BSCVTY, "exit"); |
| f_vty_transceive(BSCVTY, "exit"); |
| } |
| |
| /* Begin assignmet procedure and send an EMERGENCY SETUP (RR) */ |
| private function f_assignment_emerg_setup() runs on MSC_ConnHdlr { |
| var PDU_ML3_MS_NW emerg_setup; |
| var octetstring emerg_setup_enc; |
| var RSL_Message emerg_setup_data_ind; |
| |
| f_establish_fully(omit, omit); |
| |
| emerg_setup := valueof(ts_ML3_MO_CC_EMERG_SETUP(1, valueof(ts_Bcap_voice))); |
| emerg_setup_enc := enc_PDU_ML3_MS_NW(emerg_setup); |
| emerg_setup_data_ind := valueof(ts_RSL_DATA_IND(g_chan_nr, valueof(ts_RslLinkID_DCCH(0)), emerg_setup_enc)); |
| |
| RSL.send(emerg_setup_data_ind); |
| } |
| |
| /* Test if the EMERGENCY SETUP gets passed on to the MSC via A when EMERGENCY |
| * CALLS are permitted by the BSC config. */ |
| private function f_TC_assignment_emerg_setup_allow(charstring id) runs on MSC_ConnHdlr { |
| var PDU_BSSAP emerg_setup_data_ind_bssap; |
| var PDU_ML3_MS_NW emerg_setup; |
| timer T := 3.0; |
| |
| f_assignment_emerg_setup() |
| |
| T.start; |
| alt { |
| [] BSSAP.receive(tr_BSSAP_DTAP) -> value emerg_setup_data_ind_bssap { |
| emerg_setup := dec_PDU_ML3_MS_NW(emerg_setup_data_ind_bssap.pdu.dtap); |
| if (not isbound(emerg_setup.msgs.cc.emergencySetup)) { |
| setverdict(fail, "no emergency setup"); |
| } |
| } |
| [] BSSAP.receive { |
| setverdict(fail, "unexpected BSSAP message!"); |
| } |
| [] T.timeout { |
| setverdict(fail, "timout waiting for EMERGENCY SETUP!"); |
| } |
| } |
| |
| setverdict(pass); |
| } |
| |
| /* Test if the EMERGENCY SETUP gets blocked by the BSC if EMERGENCY CALLS are |
| * forbidden by the BSC config. */ |
| private function f_TC_assignment_emerg_setup_deny(charstring id) runs on MSC_ConnHdlr { |
| var PDU_BSSAP emerg_setup_data_ind_bssap; |
| timer T := 3.0; |
| |
| f_assignment_emerg_setup() |
| |
| T.start; |
| alt { |
| [] RSL.receive(tr_RSL_DATA_REQ(g_chan_nr, ?, decmatch tr_RRM_RR_RELEASE)) { |
| setverdict(pass); |
| } |
| [] RSL.receive { |
| setverdict(fail, "unexpected RSL message!"); |
| } |
| [] T.timeout { |
| setverdict(fail, "timout waiting for RR CHANNEL RELEASE!"); |
| } |
| } |
| } |
| |
| /* EMERGENCY CALL situation #1, allowed globally and by BTS */ |
| testcase TC_assignment_emerg_setup_allow() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(true, 0); |
| vc_conn := f_start_handler(refers(f_TC_assignment_emerg_setup_allow), pars); |
| vc_conn.done; |
| } |
| |
| /* EMERGENCY CALL situation #2, forbidden globally but allowed by BTS */ |
| testcase TC_assignment_emerg_setup_deny_msc() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_vty_allow_emerg_msc(false); |
| f_vty_allow_emerg_bts(true, 0); |
| vc_conn := f_start_handler(refers(f_TC_assignment_emerg_setup_deny), pars); |
| vc_conn.done; |
| } |
| |
| /* EMERGENCY CALL situation #3, allowed globally but forbidden by BTS */ |
| testcase TC_assignment_emerg_setup_deny_bts() runs on test_CT { |
| var TestHdlrParams pars := f_gen_test_hdlr_pars(); |
| var MSC_ConnHdlr vc_conn; |
| |
| /* Note: This simulates a spec violation by the MS, correct MS |
| * implementations would not try to establish an emergency call because |
| * the system information tells in advance that emergency calls are |
| * not forbidden */ |
| |
| f_init(1, true); |
| f_sleep(1.0); |
| |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(false, 0); |
| vc_conn := f_start_handler(refers(f_TC_assignment_emerg_setup_deny), pars); |
| vc_conn.done; |
| } |
| |
| /* Test what happens when an emergency call arrives while all TCH channels are |
| * busy, the BSC is expected to terminate one call in favor of the incoming |
| * emergency call */ |
| testcase TC_emerg_premption() runs on test_CT { |
| var ASP_RSL_Unitdata rsl_ud; |
| var integer i; |
| var integer chreq_total, chreq_nochan; |
| var RSL_Message rx_rsl; |
| var RslChannelNr chan_nr; |
| |
| f_init(1); |
| f_sleep(1.0); |
| |
| f_vty_allow_emerg_msc(true); |
| f_vty_allow_emerg_bts(true, 0); |
| |
| /* Fill up all channels on the BTS */ |
| chreq_total := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total"); |
| chreq_nochan := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:no_channel"); |
| for (i := 0; i < NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS; i := i+1) { |
| chan_nr := f_chreq_act_ack('33'O, i); |
| } |
| IPA_RSL[0].clear; |
| f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", |
| chreq_total + NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS); |
| |
| /* Send Channel request for emegergency call */ |
| f_ipa_tx(0, ts_RSL_CHAN_RQD('A5'O, 23)); |
| |
| /* Expect the BSC to release one (the first) TCH/F on the BTS */ |
| chan_nr := valueof(t_RslChanNr_Bm(1)); |
| f_expect_chan_rel(0, chan_nr, expect_rr_chan_rel := false, expect_rll_rel_req := false); |
| |
| /* Expect the BSC to send activate/assign the a channel for the emergency call */ |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| chan_nr := rx_rsl.ies[0].body.chan_nr; |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 33)); |
| rx_rsl := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); |
| } |
| |
| /* Hopping parameters per a timeslot */ |
| private type record length(0..64) of integer ArfcnList; |
| private type record FHParamsTs { |
| boolean enabled, |
| uint6_t hsn, |
| uint6_t maio, |
| ArfcnList ma |
| }; |
| |
| /* Hopping parameters per a transceiver */ |
| private type record length(8) of FHParamsTs FHParamsTrx; |
| |
| /* Randomly generate the hopping parameters for the given timeslot numbers */ |
| private function f_TC_fh_params_gen(template integer tr_tn := (1, 3, 5)) |
| runs on test_CT return FHParamsTrx { |
| var FHParamsTrx fhp; |
| |
| for (var integer tn := 0; tn < 8; tn := tn + 1) { |
| if (not match(tn, tr_tn)) { |
| fhp[tn].enabled := false; |
| fhp[tn].ma := { }; |
| continue; |
| } |
| |
| /* Random HSN / MAIO values: 0..63 */ |
| fhp[tn].hsn := f_rnd_int(64); |
| fhp[tn].maio := f_rnd_int(64); |
| fhp[tn].ma := { }; |
| |
| /* Random Mobile Allocation (hopping channels) */ |
| var integer ma_len := 2 + f_rnd_int(9); /* 2..10 channels */ |
| var integer step := 3 + f_rnd_int(4); /* 3..6 stepping */ |
| for (var integer i := 1; i <= ma_len; i := i + 1) { |
| fhp[tn].ma := fhp[tn].ma & { i * step }; |
| } |
| |
| fhp[tn].enabled := true; |
| } |
| |
| log("f_TC_fh_params_gen(): ", fhp); |
| return fhp; |
| } |
| |
| /* Make sure that the given Channel Description IE matches the hopping configuration */ |
| private function f_TC_fh_params_match_chan_desc(in FHParamsTrx fhp, in ChannelDescription cd) |
| { |
| var template (present) ChannelDescription tr_cd; |
| var template (present) MaioHsn tr_maio_hsn; |
| var uint3_t tn := cd.chan_nr.tn; |
| |
| if (fhp[tn].enabled) { |
| tr_maio_hsn := tr_HsnMaio(fhp[tn].hsn, fhp[tn].maio); |
| tr_cd := tr_ChanDescH1(cd.chan_nr, tr_maio_hsn); |
| } else { |
| tr_cd := tr_ChanDescH0(cd.chan_nr); |
| } |
| |
| if (not match(cd, tr_cd)) { |
| setverdict(fail, "Channel Description IE does not match: ", |
| cd, " vs expected ", tr_cd); |
| } |
| } |
| |
| /* Make sure that the given Mobile Allocation IE matches the hopping configuration */ |
| private function f_TC_fh_params_match_ma(in FHParamsTrx fhp, uint3_t tn, |
| in MobileAllocationLV ma) |
| { |
| var template MobileAllocationLV tr_ma := f_TC_fh_params_gen_tr_ma(fhp, tn, ma); |
| |
| if (not match(ma, tr_ma)) { |
| setverdict(fail, "Mobile Allocation IE does not match (tn := ", |
| tn, "): ", ma, " vs expected: ", tr_ma); |
| } else { |
| setverdict(pass); |
| } |
| } |
| |
| private function f_TC_fh_params_gen_tr_ma(in FHParamsTrx fhp, uint3_t tn, |
| in MobileAllocationLV ma) |
| return template MobileAllocationLV { |
| /* Mobile Allocation IE is expected to be empty if hopping is not enabled */ |
| if (not fhp[tn].enabled) { |
| return { len := 0, ma := ''B }; |
| } |
| |
| var bitstring full_mask := f_pad_bit(''B, 1024, '0'B); |
| var bitstring slot_mask := f_pad_bit(''B, 1024, '0'B); |
| var bitstring ma_mask := ''B; |
| var integer ma_mask_len := 0; |
| |
| /* Compose the full bit-mask (all channels, up to 1024 entries) */ |
| for (var integer i := 0; i < lengthof(fhp); i := i + 1) { |
| for (var integer j := 0; j < lengthof(fhp[i].ma); j := j + 1) { |
| if (full_mask[fhp[i].ma[j]] == '1'B) |
| { continue; } |
| full_mask[fhp[i].ma[j]] := '1'B; |
| } |
| } |
| |
| /* Compose a bit-mask for the given timeslot number */ |
| for (var integer i := 0; i < lengthof(fhp[tn].ma); i := i + 1) { |
| slot_mask[fhp[tn].ma[i]] := '1'B; |
| } |
| |
| /* Finally, compose the Mobile Allocation bit-mask */ |
| for (var integer i := 0; i < lengthof(full_mask); i := i + 1) { |
| if (full_mask[i] != '1'B) |
| { continue; } |
| |
| /* FIXME: ma_mask := ma_mask & slot_mask[i]; // triggers a bug in TITAN */ |
| if (slot_mask[i] == '1'B) { |
| ma_mask := ma_mask & '1'B; |
| ma_mask_len := lengthof(ma_mask); |
| } else { |
| ma_mask := ma_mask & '0'B; |
| } |
| } |
| |
| /* Ensure that ma_mask is octet-aligned */ |
| ma_mask := substr(ma_mask, 0, ma_mask_len); |
| ma_mask_len := (ma_mask_len + 8 - 1) / 8; |
| ma_mask := f_pad_bit(ma_mask, ma_mask_len * 8, '0'B); |
| |
| return { len := ma_mask_len, ma := ma_mask }; |
| } |
| |
| /* Configure the hopping parameters in accordance with the given record */ |
| private function f_TC_fh_params_set(in FHParamsTrx fhp, |
| uint8_t bts_nr := 0, |
| uint8_t trx_nr := 0) |
| runs on test_CT { |
| /* Enter the configuration node for the given BTS/TRX numbers */ |
| f_vty_enter_cfg_trx(BSCVTY, bts_nr, trx_nr); |
| |
| for (var integer tn := 0; tn < lengthof(fhp); tn := tn + 1) { |
| f_vty_transceive(BSCVTY, "timeslot " & int2str(tn)); |
| |
| if (not fhp[tn].enabled) { |
| f_vty_transceive(BSCVTY, "hopping enabled 0"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| continue; |
| } |
| |
| /* Configure HSN / MAIO values */ |
| f_vty_transceive(BSCVTY, "hopping sequence-number " & int2str(fhp[tn].hsn)); |
| f_vty_transceive(BSCVTY, "hopping maio " & int2str(fhp[tn].maio)); |
| |
| /* Configure the Mobile Allocation (hopping channels) */ |
| for (var integer i := 0; i < lengthof(fhp[tn].ma); i := i + 1) { |
| f_vty_transceive(BSCVTY, "hopping arfcn add " & int2str(fhp[tn].ma[i])); |
| } |
| |
| f_vty_transceive(BSCVTY, "hopping enabled 1"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| } |
| |
| f_vty_transceive(BSCVTY, "end"); |
| } |
| |
| /* Disable frequency hopping on all timeslots */ |
| private function f_TC_fh_params_unset(in FHParamsTrx fhp, |
| uint8_t bts_nr := 0, |
| uint8_t trx_nr := 0) |
| runs on test_CT { |
| /* Enter the configuration node for the given BTS/TRX numbers */ |
| f_vty_enter_cfg_trx(BSCVTY, bts_nr, trx_nr); |
| |
| for (var integer tn := 0; tn < lengthof(fhp); tn := tn + 1) { |
| f_vty_transceive(BSCVTY, "timeslot " & int2str(tn)); |
| |
| /* Delete all ARFCNs from the Mobile Allocation (if any) */ |
| for (var integer i := 0; i < lengthof(fhp[tn].ma); i := i + 1) { |
| f_vty_transceive(BSCVTY, "hopping arfcn del " & int2str(fhp[tn].ma[i])); |
| } |
| |
| f_vty_transceive(BSCVTY, "hopping enabled 0"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| } |
| |
| f_vty_transceive(BSCVTY, "end"); |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| } |
| |
| /* Verify presence and correctness of the hopping parameters (HSN, MAIO) |
| * in the Channel Identification IE of the RSL CHANnel ACTIVation message. */ |
| testcase TC_fh_params_chan_activ() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(); |
| var RSL_Message rsl_msg; |
| var RSL_IE_Body ie; |
| |
| f_init_vty(); |
| |
| f_TC_fh_params_set(fhp); /* Enable frequency hopping */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1); |
| |
| /* CS domain: 3 (SDCCH/4+CBCH) + 4 (TCH/F) + 2 (TCH/H) channels available */ |
| for (var integer i := 0; i < 9; i := i + 1) { |
| f_ipa_tx(0, ts_RSL_CHAN_RQD(f_rnd_ra_cs(), 23)); |
| rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| |
| /* Make sure that Channel Identification IE is present */ |
| if (not f_rsl_find_ie(rsl_msg, RSL_IE_CHAN_IDENT, ie)) { |
| setverdict(fail, "RSL Channel Identification IE is absent"); |
| continue; |
| } |
| |
| /* Make sure that hopping parameters (HSN/MAIO) match */ |
| f_TC_fh_params_match_chan_desc(fhp, ie.chan_ident.ch_desc.v); |
| |
| /* "Mobile Allocation shall be included but empty" - let's check this */ |
| if (ie.chan_ident.ma.v.len != 0) { |
| setverdict(fail, "Mobile Allocation IE is not empty: ", |
| ie.chan_ident.ma, ", despite it shall be"); |
| continue; |
| } |
| } |
| |
| /* Disable frequency hopping */ |
| f_TC_fh_params_unset(fhp); |
| |
| setverdict(pass); |
| } |
| |
| /* Verify the hopping parameters (HSN, MAIO, MA) in (RR) Immediate Assignment */ |
| testcase TC_fh_params_imm_ass() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(); |
| var RSL_Message rsl_msg; |
| var RSL_IE_Body ie; |
| |
| f_init_vty(); |
| |
| f_TC_fh_params_set(fhp); /* Enable frequency hopping */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1); |
| |
| /* CS domain: 3 (SDCCH/4+CBCH) + 4 (TCH/F) + 2 (TCH/H) channels available */ |
| for (var integer i := 0; i < 9; i := i + 1) { |
| f_ipa_tx(0, ts_RSL_CHAN_RQD(f_rnd_ra_cs(), 23)); |
| rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); |
| rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeC(RSL_MT_IMMEDIATE_ASSIGN_CMD)); |
| |
| /* Make sure that Full Immediate Assign Info IE is present */ |
| if (not f_rsl_find_ie(rsl_msg, RSL_IE_FULL_IMM_ASS_INFO, ie)) { |
| setverdict(fail, "RSL Full Immediate Assign Info IE is absent"); |
| continue; |
| } |
| |
| /* Decode the actual Immediate Assignment message */ |
| var GsmRrMessage rr_msg := dec_GsmRrMessage(ie.full_imm_ass_info.payload); |
| if (not match(rr_msg.header, t_RrHeader(IMMEDIATE_ASSIGNMENT, ?))) { |
| setverdict(fail, "Failed to match Immediate Assignment: ", rr_msg); |
| continue; |
| } |
| |
| /* Make sure that hopping parameters (HSN/MAIO) match */ |
| f_TC_fh_params_match_chan_desc(fhp, rr_msg.payload.imm_ass.chan_desc); |
| |
| /* Make sure that the Mobile Allocation IE matches */ |
| f_TC_fh_params_match_ma(fhp, rr_msg.payload.imm_ass.chan_desc.chan_nr.tn, |
| rr_msg.payload.imm_ass.mobile_allocation); |
| } |
| |
| /* Disable frequency hopping */ |
| f_TC_fh_params_unset(fhp); |
| |
| setverdict(pass); |
| } |
| |
| /* Verify the hopping parameters (HSN, MAIO, MA) in (RR) Assignment Command */ |
| testcase TC_fh_params_assignment_cmd() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(); |
| var RSL_Message rsl_msg; |
| var RSL_IE_Body ie; |
| |
| f_init_vty(); |
| |
| f_TC_fh_params_set(fhp); /* Enable frequency hopping */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1); |
| |
| /* HACK: work around "Couldn't find Expect for CRCX" */ |
| vc_MGCP.stop; |
| |
| var template PDU_BSSAP ass_cmd := f_gen_ass_req(); |
| ass_cmd.pdu.bssmap.assignmentRequest.codecList := ts_BSSMAP_IE_CodecList({ts_CodecFR}); |
| |
| /* CS domain (TCH): 4 (TCH/F) + 2 (TCH/H) channels available |
| * NOTE: only 3 SDCCH/4 channels are available on CCCH+SDCCH4+CBCH */ |
| for (var integer i := 0; i < 3; i := i + 1) { |
| /* Establish a dedicated channel, so we can trigger (late) TCH assignment */ |
| var DchanTuple dt := f_est_dchan(f_rnd_ra_cs(), 23, f_rnd_octstring(16)); |
| |
| /* Send a BSSMAP Assignment Command, expect CHANnel ACTIVation */ |
| BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ass_cmd)); |
| rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); |
| |
| /* ACKnowledge CHANnel ACTIVation, expect RSL DATA REQuest */ |
| f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); |
| rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeR(RSL_MT_DATA_REQ)); |
| |
| /* Make sure that L3 Information IE is present */ |
| if (not f_rsl_find_ie(rsl_msg, RSL_IE_L3_INFO, ie)) { |
| setverdict(fail, "RSL L3 Information IE is absent"); |
| continue; |
| } |
| |
| /* Decode the L3 message and make sure it is (RR) Assignment Command */ |
| var GsmRrL3Message l3_msg := dec_GsmRrL3Message(ie.l3_info.payload); |
| if (not match(l3_msg.header, t_RrL3Header(ASSIGNMENT_COMMAND))) { |
| setverdict(fail, "Failed to match Assignment Command: ", l3_msg); |
| continue; |
| } |
| |
| /* Make sure that hopping parameters (HSN/MAIO) match */ |
| var ChannelDescription chan_desc := l3_msg.payload.ass_cmd.chan_desc; |
| f_TC_fh_params_match_chan_desc(fhp, chan_desc); |
| |
| /* Make sure that Cell Channel Description IE is present if FH is enabled */ |
| if (chan_desc.h and not ispresent(l3_msg.payload.ass_cmd.cell_chan_desc)) { |
| setverdict(fail, "FH enabled, but Cell Channel Description IE is absent"); |
| continue; |
| } |
| |
| /* Make sure that the Mobile Allocation IE matches (if present) */ |
| var boolean ma_present := ispresent(l3_msg.payload.ass_cmd.mobile_allocation); |
| if (chan_desc.h and ma_present) { |
| f_TC_fh_params_match_ma(fhp, chan_desc.chan_nr.tn, |
| l3_msg.payload.ass_cmd.mobile_allocation.v); |
| } else if (chan_desc.h and not ma_present) { |
| setverdict(fail, "FH enabled, but Mobile Allocation IE is absent"); |
| continue; |
| } else if (not chan_desc.h and ma_present) { |
| setverdict(fail, "FH disabled, but Mobile Allocation IE is present"); |
| continue; |
| } |
| } |
| |
| /* Give the IUT some time to release all channels */ |
| f_sleep(3.0); |
| |
| /* Disable frequency hopping */ |
| f_TC_fh_params_unset(fhp); |
| |
| setverdict(pass); |
| } |
| |
| /* Verify the hopping parameters in System Information Type 4 */ |
| testcase TC_fh_params_si4_cbch() runs on test_CT { |
| var FHParamsTrx fhp := f_TC_fh_params_gen(tr_tn := 1); |
| var ASP_RSL_Unitdata rx_rsl_ud; |
| timer T := 5.0; |
| |
| f_init_vty(); |
| |
| /* (Re)configure TS0 as BCCH and TS1 as SDCCH8+CBCH */ |
| f_vty_enter_cfg_trx(BSCVTY, trx := 0); |
| |
| f_vty_transceive(BSCVTY, "timeslot 0"); |
| f_vty_transceive(BSCVTY, "phys_chan_config ccch"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| |
| f_vty_transceive(BSCVTY, "timeslot 1"); |
| f_vty_transceive(BSCVTY, "phys_chan_config sdcch8+cbch"); |
| f_vty_transceive(BSCVTY, "end"); /* we're done */ |
| |
| f_TC_fh_params_set(fhp); /* Enable frequency hopping */ |
| f_vty_transceive(BSCVTY, "drop bts connection 0 oml"); |
| |
| f_init(1); |
| |
| T.start; |
| alt { |
| [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO(RSL_SYSTEM_INFO_4))) -> value rx_rsl_ud { |
| var RSL_IE_Body ie := rx_rsl_ud.rsl.ies[2].body; /* FULL BCCH Information IE */ |
| var SystemInformation si := dec_SystemInformation(ie.other.payload); |
| |
| /* Make sure that what we decoded is System Information Type 4 */ |
| if (si.header.message_type != SYSTEM_INFORMATION_TYPE_4) { |
| setverdict(fail, "RSL FULL BCCH Information IE contains: ", si); |
| repeat; |
| } |
| |
| /* Make sure that CBCH Channel Description IE is present */ |
| if (not ispresent(si.payload.si4.cbch_chan_desc)) { |
| setverdict(fail, "CBCH Channel Description IE is absent"); |
| break; |
| } |
| |
| /* Finally, check the hopping parameters (HSN, MAIO) */ |
| var ChannelDescription chan_desc := si.payload.si4.cbch_chan_desc.v; |
| f_TC_fh_params_match_chan_desc(fhp, chan_desc); |
| |
| /* 3GPP TS 44.018, section 9.1.36.2 "CBCH Mobile Allocation": |
| * The CBCH Mobile Allocation IE *shall* be present if FH is enabled. */ |
| if (chan_desc.h and not ispresent(si.payload.si4.cbch_mobile_alloc)) { |
| setverdict(fail, "FH enabled, but Mobile Allocation IE is absent"); |
| break; |
| } else if (chan_desc.h and ispresent(si.payload.si4.cbch_mobile_alloc)) { |
| f_TC_fh_params_match_ma(fhp, chan_desc.chan_nr.tn, |
| si.payload.si4.cbch_mobile_alloc.v); |
| } |
| } |
| [] IPA_RSL[0].receive { repeat; } |
| [] T.timeout { |
| setverdict(fail, "Timeout waiting for RSL BCCH INFOrmation (SI4)"); |
| } |
| } |
| |
| /* Disable frequency hopping */ |
| f_TC_fh_params_unset(fhp); |
| |
| /* (Re)configure TS0 as CCCH+SDCCH4 and TS1 as TCH/F */ |
| f_vty_enter_cfg_trx(BSCVTY, trx := 0); |
| |
| f_vty_transceive(BSCVTY, "timeslot 0"); |
| f_vty_transceive(BSCVTY, "phys_chan_config ccch+sdcch4"); |
| f_vty_transceive(BSCVTY, "exit"); /* go back */ |
| |
| f_vty_transceive(BSCVTY, "timeslot 1"); |
| f_vty_transceive(BSCVTY, "phys_chan_config tch/f"); |
| f_vty_transceive(BSCVTY, "end"); /* we're done */ |
| |
| setverdict(pass); |
| } |
| |
| /* Dyn PDCH todo: |
| * activate OSMO as TCH/F |
| * activate OSMO as TCH/H |
| * does the BSC-located PCU socket get the updated INFO? |
| * what if no PCU is connected at the time? |
| * is the info correct on delayed PCU (re)connect? |
| */ |
| |
| control { |
| /* CTRL interface testing */ |
| execute( TC_ctrl_msc_connection_status() ); |
| execute( TC_ctrl_msc0_connection_status() ); |
| execute( TC_ctrl() ); |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_SCCPlite_SERVER) { |
| execute( TC_ctrl_location() ); |
| } |
| |
| execute( TC_si_default() ); |
| execute( TC_si2quater_2_earfcns() ); |
| execute( TC_si2quater_3_earfcns() ); |
| execute( TC_si2quater_4_earfcns() ); |
| execute( TC_si2quater_5_earfcns() ); |
| execute( TC_si2quater_6_earfcns() ); |
| execute( TC_si2quater_12_earfcns() ); |
| execute( TC_si2quater_23_earfcns() ); |
| execute( TC_si2quater_32_earfcns() ); |
| execute( TC_si2quater_33_earfcns() ); |
| execute( TC_si2quater_42_earfcns() ); |
| execute( TC_si2quater_48_earfcns() ); |
| execute( TC_si2quater_49_earfcns() ); |
| execute( TC_si_acc_rotate() ); |
| execute (TC_si_acc_ramp_rotate() ); |
| |
| /* RSL DCHAN Channel ACtivation / Deactivation */ |
| execute( TC_chan_act_noreply() ); |
| execute( TC_chan_act_counter() ); |
| execute( TC_chan_act_ack_noest() ); |
| execute( TC_chan_act_ack_noest_emerg() ); |
| execute( TC_chan_rqd_emerg_deny() ); |
| execute( TC_chan_act_ack_est_ind_noreply() ); |
| execute( TC_chan_act_ack_est_ind_refused() ); |
| execute( TC_chan_act_nack() ); |
| execute( TC_chan_exhaustion() ); |
| execute( TC_chan_deact_silence() ); |
| execute( TC_chan_rel_rll_rel_ind() ); |
| execute( TC_chan_rel_conn_fail() ); |
| execute( TC_chan_rel_hard_clear() ); |
| execute( TC_chan_rel_hard_clear_csfb() ); |
| execute( TC_chan_rel_hard_rlsd() ); |
| execute( TC_chan_rel_hard_rlsd_ms_dead() ); |
| execute( TC_chan_rel_a_reset() ); |
| execute( TC_chan_rel_sccp_tiar_timeout() ); |
| execute( TC_chan_rel_rr_cause() ); |
| |
| execute( TC_outbound_connect() ); |
| |
| /* Assignment related */ |
| execute( TC_assignment_cic_only() ); |
| execute( TC_assignment_csd() ); |
| execute( TC_assignment_ctm() ); |
| execute( TC_assignment_sign() ); |
| execute( TC_assignment_fr_a5_0() ); |
| execute( TC_assignment_fr_a5_1() ); |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_assignment_fr_a5_1_codec_missing() ); |
| } |
| execute( TC_assignment_fr_a5_3() ); |
| execute( TC_assignment_fr_a5_4() ); |
| execute( TC_ciph_mode_a5_0() ); |
| execute( TC_ciph_mode_a5_1() ); |
| execute( TC_ciph_mode_a5_3() ); |
| |
| execute( TC_assignment_codec_fr() ); |
| execute( TC_assignment_codec_hr() ); |
| execute( TC_assignment_codec_efr() ); |
| execute( TC_assignment_codec_amr_f() ); |
| execute( TC_assignment_codec_amr_h() ); |
| |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_assignment_codec_amr_f_S1() ); |
| execute( TC_assignment_codec_amr_h_S1() ); |
| execute( TC_assignment_codec_amr_f_S124() ); |
| execute( TC_assignment_codec_amr_h_S124() ); |
| execute( TC_assignment_codec_amr_f_S0() ); |
| execute( TC_assignment_codec_amr_f_S02() ); |
| execute( TC_assignment_codec_amr_f_S024() ); |
| execute( TC_assignment_codec_amr_f_S0247() ); |
| execute( TC_assignment_codec_amr_h_S0() ); |
| execute( TC_assignment_codec_amr_h_S02() ); |
| execute( TC_assignment_codec_amr_h_S024() ); |
| execute( TC_assignment_codec_amr_h_S0247() ); |
| execute( TC_assignment_codec_amr_f_S01234567() ); |
| execute( TC_assignment_codec_amr_f_S0234567() ); |
| execute( TC_assignment_codec_amr_f_zero() ); |
| execute( TC_assignment_codec_amr_f_unsupp() ); |
| execute( TC_assignment_codec_amr_h_S7() ); |
| } |
| |
| execute( TC_assignment_codec_fr_exhausted_req_hr() ); |
| execute( TC_assignment_codec_fr_exhausted_req_fr() ); |
| execute( TC_assignment_codec_fr_exhausted_req_fr_hr() ); |
| execute( TC_assignment_codec_fr_exhausted_req_hr_fr() ); |
| execute( TC_assignment_codec_hr_exhausted_req_fr() ); |
| execute( TC_assignment_codec_hr_exhausted_req_hr() ); |
| execute( TC_assignment_codec_hr_exhausted_req_hr_fr() ); |
| execute( TC_assignment_codec_hr_exhausted_req_fr_hr() ); |
| execute( TC_assignment_codec_req_hr_fr() ); |
| execute( TC_assignment_codec_req_fr_hr() ); |
| |
| if (mp_enable_osmux_test) { |
| execute( TC_assignment_osmux() ); |
| } |
| |
| /* RLL Establish Indication on inactive DCHAN / SAPI */ |
| execute( TC_rll_est_ind_inact_lchan() ); |
| execute( TC_rll_est_ind_inval_sapi1() ); |
| execute( TC_rll_est_ind_inval_sapi3() ); |
| execute( TC_rll_est_ind_inval_sacch() ); |
| |
| /* SAPI N Reject triggered by RLL establishment failures */ |
| execute( TC_rll_rel_ind_sapi_n_reject() ); |
| execute( TC_rll_err_ind_sapi_n_reject() ); |
| execute( TC_rll_timeout_sapi_n_reject() ); |
| |
| /* Paging related tests */ |
| execute( TC_paging_imsi_nochan() ); |
| execute( TC_paging_tmsi_nochan() ); |
| execute( TC_paging_tmsi_any() ); |
| execute( TC_paging_tmsi_sdcch() ); |
| execute( TC_paging_tmsi_tch_f() ); |
| execute( TC_paging_tmsi_tch_hf() ); |
| execute( TC_paging_imsi_nochan_cgi() ); |
| execute( TC_paging_imsi_nochan_lac_ci() ); |
| execute( TC_paging_imsi_nochan_ci() ); |
| execute( TC_paging_imsi_nochan_lai() ); |
| execute( TC_paging_imsi_nochan_lac() ); |
| execute( TC_paging_imsi_nochan_all() ); |
| execute( TC_paging_imsi_nochan_plmn_lac_rnc() ); |
| execute( TC_paging_imsi_nochan_rnc() ); |
| execute( TC_paging_imsi_nochan_lac_rnc() ); |
| execute( TC_paging_imsi_nochan_lacs() ); |
| execute( TC_paging_imsi_nochan_lacs_empty() ); |
| execute( TC_paging_imsi_nochan_cgi_unknown_cid() ); |
| execute( TC_paging_imsi_a_reset() ); |
| execute( TC_paging_imsi_load() ); |
| execute( TC_paging_counter() ); |
| execute( TC_paging_resp_unsol() ); |
| |
| execute( TC_rsl_drop_counter() ); |
| execute( TC_rsl_unknown_unit_id() ); |
| |
| execute( TC_oml_unknown_unit_id() ); |
| |
| execute( TC_classmark() ); |
| execute( TC_common_id() ); |
| execute( TC_unsol_ass_fail() ); |
| execute( TC_unsol_ass_compl() ); |
| execute( TC_unsol_ho_fail() ); |
| execute( TC_err_82_short_msg() ); |
| execute( TC_err_84_unknown_msg() ); |
| |
| execute( TC_ho_int() ); |
| |
| execute( TC_ho_out_of_this_bsc() ); |
| execute( TC_ho_out_fail_no_msc_response() ); |
| execute( TC_ho_out_fail_rr_ho_failure() ); |
| execute( TC_ho_out_fail_no_result_after_ho_cmd() ); |
| |
| execute( TC_ho_into_this_bsc() ); |
| execute( TC_ho_in_fail_msc_clears() ); |
| execute( TC_ho_in_fail_msc_clears_after_ho_detect() ); |
| execute( TC_ho_in_fail_no_detect() ); |
| execute( TC_ho_in_fail_no_detect2() ); |
| |
| execute( TC_ho_neighbor_config_1() ); |
| execute( TC_ho_neighbor_config_2() ); |
| execute( TC_ho_neighbor_config_3() ); |
| execute( TC_ho_neighbor_config_4() ); |
| execute( TC_ho_neighbor_config_5() ); |
| execute( TC_ho_neighbor_config_6() ); |
| execute( TC_ho_neighbor_config_7() ); |
| |
| execute( TC_bssap_rlsd_does_not_cause_bssmap_reset() ); |
| execute( TC_bssmap_clear_does_not_cause_bssmap_reset() ); |
| execute( TC_ms_rel_ind_does_not_cause_bssmap_reset() ); |
| |
| execute( TC_dyn_pdch_ipa_act_deact() ); |
| execute( TC_dyn_pdch_ipa_act_nack() ); |
| execute( TC_dyn_pdch_osmo_act_deact() ); |
| execute( TC_dyn_pdch_osmo_act_nack() ); |
| |
| execute( TC_chopped_ipa_ping() ); |
| execute( TC_chopped_ipa_payload() ); |
| |
| /* Power control related */ |
| execute( TC_assignment_verify_ms_power_params_ie() ); |
| |
| /* MSC pooling */ |
| /* FIXME: in SCCPlite, indicating how many MSCs should be connected does currently not work. Since |
| * RESET->RESET-ACK is unconditionally negotiated for all configured MSCs, they always all appear as connected |
| * to osmo-bsc. The MSC pooling tests however require disconnecting selected MSCs, and hence don't work out as |
| * intended on SCCPlite. So for now, run these only for SCCP/M3UA. */ |
| if (mp_bssap_cfg[0].transport == BSSAP_TRANSPORT_AoIP) { |
| execute( TC_mscpool_L3Compl_on_1_msc() ); |
| execute( TC_mscpool_L3Complete_by_imsi_round_robin() ); |
| execute( TC_mscpool_LU_by_tmsi_null_nri_0_round_robin() ); |
| execute( TC_mscpool_LU_by_tmsi_null_nri_1_round_robin() ); |
| execute( TC_mscpool_L3Complete_by_tmsi_unassigned_nri_round_robin() ); |
| execute( TC_mscpool_L3Complete_by_tmsi_valid_nri_msc_not_connected_round_robin() ); |
| execute( TC_mscpool_L3Complete_by_tmsi_valid_nri_1() ); |
| execute( TC_mscpool_L3Complete_by_tmsi_valid_nri_2() ); |
| execute( TC_mscpool_LU_by_tmsi_from_other_PLMN() ); |
| execute( TC_mscpool_paging_and_response_imsi() ); |
| execute( TC_mscpool_paging_and_response_tmsi() ); |
| execute( TC_mscpool_no_allow_attach_round_robin() ); |
| execute( TC_mscpool_no_allow_attach_valid_nri() ); |
| } |
| |
| /* at bottom as they might crash OsmoBSC before OS#3182 is fixed */ |
| execute( TC_early_conn_fail() ); |
| execute( TC_late_conn_fail() ); |
| |
| /* Emergency call handling (deny / allow) */ |
| execute( TC_assignment_emerg_setup_allow() ); |
| execute( TC_assignment_emerg_setup_deny_msc() ); |
| execute( TC_assignment_emerg_setup_deny_bts() ); |
| execute( TC_emerg_premption() ); |
| |
| /* Frequency hopping parameters handling */ |
| execute( TC_fh_params_chan_activ() ); |
| execute( TC_fh_params_imm_ass() ); |
| execute( TC_fh_params_assignment_cmd() ); |
| execute( TC_fh_params_si4_cbch() ); |
| } |
| |
| } |