Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
osmo-trx
/
7fec3030d46b2c35c34d90507feab253cddb9c01
/
Transceiver52M
7fec303
EDGE: Combine shared GMSK and 8-PSK demodulator sections
by Tom Tsou
· 8 years ago
af717b2
EDGE: Add random burst generator filler option
by Tom Tsou
· 8 years ago
8ee2f38
sigproc: Add various GSM burst generators
by Tom Tsou
· 8 years ago
4dfd64a
sigproc: Always use 625 sample length bursts with 4 SPS
by Tom Tsou
· 8 years ago
b0aefcb
EDGE: Add interfaces to enable EDGE transceiver
by Tom Tsou
· 8 years ago
d325343
EDGE: Add 8-PSK modulator and demodulator
by Tom Tsou
· 8 years ago
5cd70dc
EDGE: Setup variable sampling on receive path
by Tom Tsou
· 8 years ago
4656940
sigproc: Remove normal burst DFE equalizer
by Tom Tsou
· 8 years ago
2079a3c
sigproc: Remove dynamic SPS configuration
by Tom Tsou
· 8 years ago
99cf930
Transceiver52M: Fix ARM build issues
by Tom Tsou
· 9 years ago
283b22d
uhd: Remove references to USRP B205
by Tom Tsou
· 9 years ago
f147b17
sigproc: Make convolution and convert input buffers immutable
by Tom Tsou
· 9 years ago
d4d3daa
uhd: Use internal UHD tick conversions
by Tom Tsou
· 9 years ago
c312905
uhd: Add version 3.9.0 support
by Tom Tsou
· 9 years ago
c4eab87
uhd: Output Rx/Tx gain limits to log to make it more transparent.
by Alexander Chemeris
· 9 years ago
5a06806
Transceiver: Add support for OsmoBTS style handover.
by Alexander Chemeris
· 9 years ago
3722920
Transceiver: Fix whitespace.
by Alexander Chemeris
· 9 years ago
f3b9af6
uhd: Fix UmTRX tuning broken in commit 90f7a01d.
by Alexander Chemeris
· 9 years ago
e692ce9
transceiver: Add a debug option to dump selected timeslots to disk.
by Alexander Chemeris
· 9 years ago
81c6873
Transceiver: Do not update state->SNRestimate if equalization is disabled.
by Alexander Chemeris
· 9 years ago
c052aa1
uhd: Fix rounding error in timestamp conversion functions.
by Alexander Chemeris
· 9 years ago
130a800
sigProcLib: Abstract out common part of Normal/RACH burst detection.
by Alexander Chemeris
· 9 years ago
2b54210
Transceiver: Update noise level only when the timeslot is marked as IDLE.
by Alexander Chemeris
· 9 years ago
2268c85
transceiver: Remove noise/RSSI gating.
by Alexander Chemeris
· 9 years ago
50747dc
osmo-trx: Add an option to swap channels on UmTRX.
by Alexander Chemeris
· 9 years ago
1e9b4d5
sigProcLib: Check for bogus TOA before using it.
by Alexander Chemeris
· 9 years ago
954b118
Transceiver: Fix clipping detection.
by Alexander Chemeris
· 9 years ago
dbe26ab
Transceiver: Print noise level for each burst in debug mode.
by Alexander Chemeris
· 9 years ago
e8905a0
osmo-trx: Add a command line option for the dBFS to dBm offset.
by Alexander Chemeris
· 9 years ago
351fd76
sigProcLib: Fix burst start phase.
by Alexander Chemeris
· 9 years ago
6a2bf0d
transceiver: Drive clock indication form the receive thread.
by Alexander Chemeris
· 9 years ago
2966048
transceiver: Fix out-of-bounds acces in genRandNormalBurst().
by Alexander Chemeris
· 9 years ago
f5fd578
osmo-trx: Fix random filler command line option.
by Alexander Chemeris
· 9 years ago
194a9b1
Transceiver52M: Change POWERON behavior to return success if the transceiver is already running, and only return fail on device
by Ivan Kluchnikov
· 9 years ago
1fe5282
Transceiver: Check TSC values to be in [0..7] range.
by Alexander Chemeris
· 9 years ago
4438a9f
Transceiver: Make error response to an unknown command on UDP command interface more understandable.
by Alexander Chemeris
· 11 years ago
64ad712
test: Add command line random normal burst option
by Tom Tsou
· 9 years ago
5c7c178
uhd: Pass UHD command line arguments to constructor
by Tom Tsou
· 9 years ago
90f7a01
umtrx: Don't use DSP tuning, because LMS6002D PLL steps are small enough.
by Alexander Chemeris
· 9 years ago
e171425
uhd: Set RF frontend bandwidth for UmTRX to improve signal quality.
by Alexander Chemeris
· 9 years ago
4d029d8
UmTRX: Manually set Tx gain stages for the best signal quality.
by Alexander Chemeris
· 10 years ago
577cd02
sigproc: Add clipping detection on RACH and TSC input
by Tom Tsou
· 9 years ago
88bbf1a
uhd: Use full DAC scale with UmTRX to improve signal quality.
by Alexander Chemeris
· 9 years ago
d7610cf
radioInterface: Reset sample buffer cursors on each start
by Tom Tsou
· 9 years ago
722d4f7
usrp1: Update device API for frequency offset tuning
by Tom Tsou
· 10 years ago
93b7f37
b210: Lock dual-channel tuning access
by Tom Tsou
· 10 years ago
4ad9ea6
Transceiver52M: Add X300/X310 and E310 USRP support
by Tom Tsou
· 10 years ago
eb54bdd
Transceiver52M: Implement POWEROFF command
by Tom Tsou
· 10 years ago
a4d1a41
Transceiver52M: Allow setting gain before POWERON
by Tom Tsou
· 10 years ago
1ae2556
uhd: Display current timestamp with buffer status errors
by Tom Tsou
· 10 years ago
187225c
Transceiver52M: Fix SSE convolution shuffle register
by Thomas Tsou
· 10 years ago
ccb73e1
Transceiver52M: Fix retransmissions when filler table is enabled
by Thomas Tsou
· 10 years ago
a5c83ae
Transceiver52M: Add E1XX USRP device id and timings
by Thomas Tsou
· 10 years ago
c283916
Transceiver52M: Allow startup delay for stream alignment
by Thomas Tsou
· 10 years ago
cecfb2e
Transceiver52M: Set UHD rates before creating streamers
by Thomas Tsou
· 10 years ago
8e17df7
Transceivert52M: Add option for baseband frequency offset
by Thomas Tsou
· 10 years ago
3ebc772
Transceiver52M: Enable B210 dual channel support
by Thomas Tsou
· 11 years ago
18d3b83
Transceiver52M: Disable initial device time reset
by Thomas Tsou
· 11 years ago
e788239
Transceiver52M: Split B200 and B210 identifiers
by Thomas Tsou
· 11 years ago
635f1bf
Transceiver52M: Set B2XX clock frequency to 26 MHz
by Thomas Tsou
· 11 years ago
15d743e
Transceiver52M: Disable filler table retransmissions by default
by Thomas Tsou
· 11 years ago
af50644
Transceiver52M: Add missing scaling vector resize
by Thomas Tsou
· 11 years ago
4de70be
Transceiver52M: Remove database configuration file requirement
by Thomas Tsou
· 11 years ago
fb827d0
Transceiver52M: Ignore channel estimation if we are not equalizing
by Thomas Tsou
· 11 years ago
2c79110
Transceiver52M: UHD: Check running status before stopping stream
by Thomas Tsou
· 11 years ago
85b179d
Transceiver52M: Create new osmo-trx executable
by Thomas Tsou
· 11 years ago
2e622ff
Transceiver52M: Output device and operating mode to stdout
by Thomas Tsou
· 11 years ago
3f32ab5
Transceiver52M: Enable all warnings and resolve
by Thomas Tsou
· 11 years ago
8c33679
Transceiver52M: Add virtual destructor for radio device
by Thomas Tsou
· 11 years ago
477b77c
Transceiver52M: Remove unused code
by Thomas Tsou
· 11 years ago
d3fccea
Transceiver52M: Allow only channel zero to set TSC value
by Thomas Tsou
· 11 years ago
cb269a3
Transceiver52M: Use independent power scaling varables for each channel
by Thomas Tsou
· 11 years ago
1882099
Transceiver52M: Set const qualifier on appropriate radio vector methods
by Thomas Tsou
· 11 years ago
a0179e3
Transceiver52M: Use independent noise vectors for each channel
by Thomas Tsou
· 11 years ago
ef25dba
Transceiver52M: Ignore detected bursts at the noise floor
by Thomas Tsou
· 11 years ago
2d0c00b
Transceiver52M: Check time slot validity of incoming bursts
by Thomas Tsou
· 11 years ago
e90a42b
Transceiver52M: Add dual channel diversity receiver option
by Thomas Tsou
· 11 years ago
30421a7
Transceiver52M: Refactor receive path outer burst handling
by Thomas Tsou
· 11 years ago
34bbef7
Transceiver52M: sigproc: Wrap internal phase on frequency shift
by Thomas Tsou
· 11 years ago
2c1f85a
Transceiver52M: UHD: Add string descriptors to device-offset pairs
by Thomas Tsou
· 11 years ago
a2fe91a
Transceiver52M: Add vectorized radio burst capability
by Thomas Tsou
· 11 years ago
e1ce925
Transceiver52M: Rearrange socket port assignemnts
by Thomas Tsou
· 11 years ago
b075dd2
Transceiver52M: Dynamically allocate correlation vectors
by Thomas Tsou
· 11 years ago
94edaae
Transceiver52M: Allow separate in/out vectors for delay and decimation
by Thomas Tsou
· 11 years ago
0e0e1f4
Transceiver52M: Setup sinc() call directly with table lookup
by Thomas Tsou
· 11 years ago
d0f3ca3
Transceiver52M: Preallocate head room for burst correlation
by Thomas Tsou
· 11 years ago
f8bc7c3
Transceiver52M: UHD: Continue on receive and send timeouts
by Thomas Tsou
· 11 years ago
a4cf48c
Transceiver52M: Set priority on downlink socket thread
by Thomas Tsou
· 11 years ago
7940335
Transceiver52M: Default to 1 sample-per-symbol low powered devices
by Thomas Tsou
· 11 years ago
f79c4d0
Transceiver52M: Precompute fractional delay filters
by Thomas Tsou
· 11 years ago
20eb6d6
Transceiver52M: Separate signalVector into it's own file
by Thomas Tsou
· 11 years ago
e0fa2bf
Transceiver52M: Remove extra copy in receive drive path
by Thomas Tsou
· 11 years ago
6f4906e
Transceiver52M: Dynamically allocate convolution input vectors
by Thomas Tsou
· 11 years ago
0a3dc4c
Transceiver52M: Add NEON complex-complex multiply
by Thomas Tsou
· 11 years ago
acc22fa
Transceiver52M: Use USRP1 type window for B2xx devices
by Thomas Tsou
· 11 years ago
7553aa9
Transceiver52M: Set variable thread priority levels
by Thomas Tsou
· 11 years ago
7e4e536
Transceiver52M: Add ARM NEON support
by Thomas Tsou
· 11 years ago
204a9f1
Transceiver52M: Add multi channel transceiver support
by Thomas Tsou
· 11 years ago
0169b31
Transceiver52M: Remove unnecessary UHD clock setting call
by Thomas Tsou
· 11 years ago
66e2dd2
Transceiver52M: Remove unused files and utilities
by Thomas Tsou
· 11 years ago
Next »