| osmo-trx (1.2.0) unstable; urgency=medium |
| |
| [ Pau Espin Pedrol ] |
| * osmo-trx: log to stderr on signal received |
| * Drop old setPriority related code |
| * Transceiver: fix segfault during init if IP addr binding fails |
| * Transceiver: Check return value when binding IP addr for clock socket |
| * Transceiver: Clean up receival of downlink bursts |
| * Transceiver: Fix idle ul burst indications being dropped |
| * Transceiver: exit process when BTS drops connection |
| * Transceiver: Enable EDGE detection only on PDCH timeslots |
| * lms: Log available antennas if requested antenna fails |
| * device: Use LOGCHAN in set_antennas() |
| * Transceiver: Fix logging TN and version |
| * Transceiver: Use LOGCHAN in logRxBurst to unify log format |
| * Transceiver: Log error condition no burst in pullRadioVector() |
| * Transceiver: pullRadioVector(): Fix use of uninitialized value bi->tn |
| * Transceiver: Don't stop TRX if pulling from OFF timeslot |
| * radioInterface: Rename mRadio to mDevice |
| * radioInterfaceMulti: Check equals zero explicitly |
| * USRPDevice: Fix setRxGain return on error and getRxGain() returning always 0 |
| * USRPDevice: Return previous txGain if setting value failed |
| * LMSDevice: Return previous txGain/rxGain if setting value failed |
| * radioInterface: Remove unusued getRxGain() |
| * radioDevice: Introduce getTxGain() API |
| * radioInterfaceMulti: Override setTxGain() to avoid chan!=0 calls |
| * UHDDevice: Drop unneeded MULTI_ARFCN checks |
| * radioInterface{Multi,Resamp}: Fix successful writeSamples() masking underrun from readSamples() |
| * radioInterface: Mark setRxGain as virtual |
| * Move multi-ARFCN chan amount modification from UHDDevice to parent class |
| * radioInterface: Atomically fetch and change underrun variable |
| * radioInterfaceMulti: write frequency offset direction (rx/tx) in log line |
| * Use new libosmocore logging lock API |
| * Transceiver: Fix wrong response upon CMD HANDOVER failure |
| * uhd: use value already cached in tmp variable |
| * Transceiver.cpp: Introduce and use new logging categories |
| |
| [ Timo Jacobus ] |
| * Transceiver: Fixed copying of history into and from channelizer buffer. |
| |
| [ Alexander Chemeris ] |
| * vty: Don't enable random filler bursts automatically with EDGE. |
| * vty: Simplify filler burst settings and improve help and readability. |
| |
| [ Martin Hauke ] |
| * Fix common misspellings and typos |
| |
| [ Harald Welte ] |
| * trx: exit() on unsupported positional arguments on command line |
| |
| -- Pau Espin Pedrol <pespin@sysmocom.de> Fri, 03 Jan 2020 19:54:00 +0100 |
| |
| osmo-trx (1.1.1) unstable; urgency=medium |
| |
| * UNRELEASED |
| |
| -- Pau Espin Pedrol <pespin@sysmocom.de> Thu, 08 Aug 2019 13:00:05 +0200 |
| |
| osmo-trx (1.1.0) unstable; urgency=medium |
| |
| [ Sylvain Munaut ] |
| * arm/convolve: Fix the vfp4 real convolution for h_len=12 |
| * convolve: Remove support for step, offset parameters |
| * tests: Rework the convolve_test |
| * tests: Re-enable the convolve_test by default |
| * sigProcLib: Add C/I (Carrier-to-Interference ratio) computation |
| |
| [ Vadim Yanitskiy ] |
| * VTY: add extended (11-bit) RACH detection toggle |
| * doc/configuration.adoc: fix incorrect number of physical RF channels for B210 |
| * driveTxPriorityQueue(): cosmetic: use proper type for TDMA TN |
| * driveTxPriorityQueue(): use trxd_hdr_common for message parsing |
| * driveTxPriorityQueue(): check if message header format is supported |
| * driveTxPriorityQueue(): enrich logging message |
| * trxd_fill_common(): fix TRXD header version coding |
| * manuals/configuration.adoc: fix copy-paste error in config example |
| |
| [ Pau Espin Pedrol ] |
| * osmo-trx: Avoid handling signals after shutdown triggered |
| * osmo-trx: Use signalfd to serialize signals in main thread ctx |
| * osmo-trx: Check return code of osmo_fd_register |
| * lms: flush_recv: alloc buf on stack instead of heap |
| * lms: Improve log during flush recv error |
| * cosmetic: Threads.h: Remove trailing whitespace |
| * Move duplicated thread_enable_cancel to CommonLibs |
| * lms: Log underrun/overrun events |
| * lms: Remove references to ALERT loglevel |
| * lms: Remove unused var m_last_tx_overruns |
| * lms: Catch and log dropped packets by HW during recv |
| * cosmetic: uhd: Move smpl_buf out of UHDDevice, move UHDDevice class definition to .h |
| * uhd: smpl_buf: Drop UHD specifics out back to UHDDevice |
| * uhd: smpl_buf: Use TIMESTAMP type in str_status |
| * cosmetic: uhd: Use loglevel ERROR instead of ERR |
| * uhd: Avoid reallocation of buffers every read |
| * Move smpl_buf out of uhd dir to re-use it in other devices |
| * device: Drop unused numberRead/numberWritten APIs |
| * smpl_buf: Remove unused clk_rt variable |
| * smpl_buf: Remove unused clk_rt variable (fixup) |
| * smpl_buf: Remove dbg log line with duplicated info |
| * Introduce LOGCHAN macro to standarize logging channel info |
| * smpl_buf: Move it to device/common and create libdevice_common.la |
| * lms: Use smpl_buf to recover from timestamp jumps |
| * lms: Fix stream_stats checks with droppedPackets |
| * Add rate_ctr support to store/retrieve SDR errors through VTY |
| * Rename and move STOP signal from Transceiver to main |
| * doc: vty: Update trx_vty_reference.xml |
| * lms: Drop unusued variable masterClockRate |
| * lms: Fix stream_stats checks with overrun/underrun |
| * Add VTY commands to set error ctr thresholds |
| * Remove AUTHORS file |
| * trx_{vty,rate_ctr}: Set proper license AGPLv3+ |
| * Introduce structs to encode TRXD packets |
| * Transceiver: refactor: gather uplink burst parameters in struct |
| * Transceiver: Drop unused rssi_valid struct field |
| * Transceiver: Move nbits burst size calculation to pullRadioVector() |
| * Transceiver: Move calculation of normalized values (rssiOffset) to pullRadioVector() |
| * Transceiver: Move soft bits normalization to pullRadioVector() |
| * Transceiver: Drop use of GSM::Time from trx_ul_burst_ind |
| * Transceiver: Get rid of SoftVector in struct trx_ul_burst_ind |
| * Transceiver: replace UDPSocket with libosmocore socket API |
| * Transceiver: Avoid noise calculation formula in 2 branches in pullRadioVector |
| * Transceiver: Simplify code on early error return when calling detectAnyBurst |
| * Transceiver: pullRadioVector(): Move initialization of var to start of function |
| * Transceiver: Support pulling idle frames in pullRadioVector() |
| * sigProcLib: detectAnyBurst() family: Use struct to gather all out params |
| * sigProcLib: detectAnyBurst(): make TSC used to detect burst available to caller |
| * Logger: global Log mutex is now available from C code |
| * Transceiver: Move out TRXD socket send code to prepare for TRXDv1 |
| * Transceiver: Support SETFORMAT command |
| * Transceiver: Support TRXD v1 |
| * Transceiver: Initialize mExtRACH in constructor |
| * debian/copyright: Remove non existent radioInterfaceDiversity.cpp from list |
| * debian/copyright: Update wrong paths in license list |
| * debian/copyright: Add missing file Utils.* to LGPL-2.1+ list |
| * cosmetic: Fix trailing whitespace in several files |
| * Add SPDX annotation |
| * Bind CTRL port to IP addr specified in VTY config |
| * Transceiver: Store TRXD version per channel |
| * Transceiver: Clean up code passing parameters to threads |
| * Remove empty ChangeLog fnd NEWS files |
| * Remove unused autogen.sh |
| * radioInterface: Clarify how underruns are handled driving a radioDevice |
| * usrp1: don't check for non-null underrun pointer |
| * jenkins.sh: Workaround libusrp build race conditon |
| * lms: Drop rx_underruns rate ctr, add tx_drop_* rate ctr |
| * Move inband-signaling-usb documentation to UserManual |
| * Move matlab files under utils/matlab |
| * Move Transceiver52/README to UserManual |
| * Move README.DFEsymbolspaced to utils/matlab |
| * Move std_inband.rbf under device/usrp1/ dir |
| * Drop old README information, provide new updated README |
| * Transceiver: Add missing include netinet/in.h |
| * Require newer version of libosmocore to avoid build failure |
| |
| [ Tom Tsou ] |
| * multi-ARFCN: fix maximum number of carriers limitation |
| |
| [ Harald Welte ] |
| * use BSC_FD_READ and not OSMO_FD_READ |
| * proto_trxd.c: Use bit-wise AND, not boolean AND |
| * Timeval: Restore output stream flags after changing them |
| * ChannelizerBase: fix initialization of class members |
| * CorrelationSequence: fix initialization of class members |
| * radioInterface.cpp: Fix missing member initialization of RadioInterface() |
| |
| [ Joachim Steiger ] |
| * lms: Remove wrong unused code copied from -uhd |
| * lms: move LMS_EnableChannel from Start/Stop to Open/Close device |
| * lms: move LMS_GetLPFBWRange and LMS_Calibrate calls from open to start |
| * lms: add device type detection and device specific gains |
| * lms: properly call close if set_antennas() fails, add some comments |
| |
| [ Oliver Smith ] |
| * debian: create -doc subpackage with pdf manuals |
| * contrib/jenkins.sh: run "make maintainer-clean" |
| |
| [ Eric Wild ] |
| * Add option to set stack size in config file, default == 0 == OS default |
| |
| [ Ruben Undheim ] |
| * Fix spelling discovered by lintian |
| |
| -- Pau Espin Pedrol <pespin@sysmocom.de> Wed, 07 Aug 2019 21:12:56 +0200 |
| |
| osmo-trx (1.0.0) unstable; urgency=medium |
| |
| [ Pau Espin Pedrol ] |
| * doc: examples: Add umtrx sample config |
| * UHDDevice: Fix setup failure with LimeSuite > 18.04.1 |
| * examples: Set rt-prio 18 and print file basename |
| * lms: Several improvements and compilation/runtime fixes |
| * build: Add support for LimeSuite device backend |
| * LMSDevice: Set correct values for Max{Tx,Rx}Gain |
| * LMSDevice: Fix setup failure with LimeSuite > 18.04.1 |
| * lms: Makefile.am: Reorder params to fix link issue |
| * lms: Check LPBFW to set is within supported range |
| * debian: Add package osmo-trx-lms |
| * contrib: Add systemd services for all backends |
| * debian: Add cfg file examples for osmo-trx-{lms,uhd} |
| * Add -V param to print version |
| * lms: Allow values diff than 34dB to be set by setRxGain() |
| * Use correct paths when installing example files |
| * debian: Enable build of osmo-trx-lms |
| * debian: Explicitly enable osmo-trx-uhd build |
| * configure.ac: Fix typo in with-lms help string |
| * vty: Fix typo in gpsdo clock reference type |
| * configure.ac: Add --enable-werror option |
| * Logger: Disable pthread cancel point inside Logger destructor |
| * cosmetic: Fix trailing whitespace |
| * radioInterface: forward errors from RadioDevice to Transceiver in recv path |
| * lms: Return error on device read timeout |
| * osmo-trx: Add osmo_signal to stop whole transceiver chain correctly on error |
| * radioInterface: Fix variable storing integer return value |
| * configure.ac: Specify default language as C++ |
| * UHHDDevice: Replace deprecated header uhd/utils/thread_priority.hpp |
| * SigProcLib: Use available copyTo Vector API instead of memcopy |
| * cosmetic: Fix trailing whitespace in several files |
| * radioInterfaceMulti:pullBuffer: Sanely convert float array to complex array |
| * Vector: Copy arrays in a sane way for non-trivially copyable types |
| * jenkins.sh: Add --enable-werror flag to osmo-trx configure step |
| * Install systemd services with autotools |
| * Install sample cfg file to /etc/osmocom |
| * cosmetic: Use proper whitespace in several for loops |
| * Use pthread_setname_np to name threads |
| * CommonLibs/Makefile.am: Specify libcommon_la_LIBADD |
| * Transciever: Log values causing Tx underrun |
| * examples: Use logging level 'set-all' instead of 'all' |
| * jenkins.sh: Enable build of osmo-trx-lms |
| * ChannelizerBase: Fix ASan alloc-dealloc-mismatch |
| * UHDDevice: setRxGain on chan 0 when using multi-arfcn |
| * lms: Use LimeSuite.h log level defines instead of hardcoded values |
| * lms: Apply LMS->OSMO log level conversion |
| * Introduce OsmoTRX manual |
| * Introduce chapter trx_if.adoc and add it to OsmoTRX and OsmoBTS |
| * trx: Add reference to project wiki page in overfiew section |
| * trx: Add Hardware architecture support section |
| * trx: Add Hardware device support section |
| * osmotrx: Split Device specific section from backend one |
| * osmotrx: Write initial documentation for several supported devices |
| * osmotrx: configuration: Add section to document multi-arfcn feature |
| * osmotrx: Create a common chapter for section documenting backends |
| * osmotrx: Introduce code architecture chapter |
| * lms: Fix start after stop of device |
| * lms: Destroy streams on device stop |
| * radioInterface: Fix memleak during close() |
| * PointerFIFO: Fix memleak of ListNode |
| * lms: Make sure LMS_Close is called when Device is torn down |
| * osmo-trx: Change some lines to use libosmocore logging instead of cout |
| * lms: Close device on LMS_Init failure |
| * SigProcLib: Improve Vector buffer allocation mess |
| * lms: Allow setting Tx/RxGain for chan!=0 |
| * lms: Allow setting Tx/RxFreq for lchan!=0 |
| * lms: Improve Set{Rx,Tx}{Gain,Freq} logging |
| * transceiver: log chan on CTRL command received |
| * Add TRXCTRL log category |
| * transceiver: Log TRXCTRL iface responses towards osmo-bts-trx |
| * lms: Move {under,over}run checks into separate method |
| * lms: Do {under,over}run checks even if LMS_RecvStream fails |
| * Timeval: passed() returns true if time is equal |
| * Timeval: Move implementation to use clock_gettime and timespec |
| * Timeval: Move to osmo_clock_gettime |
| * TimevalTest: Make test deterministic with fake time |
| * lms: Fix build against LimeSuite > 18.10 |
| * configure.ac: check boost only if USRP1 support is enabled |
| |
| [ Vadim Yanitskiy ] |
| * trx_vty.c: fix: use CONFIG_NODE as parent by default |
| * device/lms/LMSDevice.cpp: fix compilation warning |
| * sigProcLib: introduce both TS1 and TS2 RACH synch. sequences |
| * sigProcLib: add a CorrType for extended (11-bit) RACH |
| |
| [ Harald Welte ] |
| * Initial work towards direct LimeSuite support in OsmoTRX |
| * update .gitignore to include osmo-trx-lms |
| * LMSDevice: Call LMS_Init() before setting sample rate |
| * LMSDevice: Print sample rate range + actual sample rate after setting it |
| * LMSDevice: Typo fix: s/Internal/External |
| * LMSDevice: Set low-pass filters to smallest possible option |
| * LMSDevice: Fix initial timestamp offset of 2500 |
| * LMS_Device: Set ts_offset to 0. |
| * LMSDevice: Reduce Rx logging verbosity: Only log unexpected timestamps |
| * move set_antennas() from UHD to generic radioDevice base class |
| * lms: Fix support for rx_paths / tx_paths |
| * lms: Call set_antennas() during open() method |
| * radioDevice: Move tx_sps from derived into base class |
| * radioDevice: better encapsulation in base class |
| * lms: Fix coding style |
| * lms: Fail in case of unsupported configuration |
| * usrp1: Fail in case of unsupported configuration |
| * Fix config file saving of {tx,rx}-path VTY config strings |
| * logging: Introduce new "DDEV" category for device-specific code |
| * update git-version-gen to generate proper version numbers |
| * ensure well-formed example config files |
| * SocketsTest.testReaderIP(): Zero terminate received buffer |
| * trx_validate_config(): Fix validation of rx_sps |
| * vty-ref: Update URI of docbook 5.0 schema |
| * lms: User correct scale factor for transmit samples |
| * lms: Set Rx gain to midpoint, as comment suggests. |
| * usrp1: Remove uninitialized skipRx logic |
| * usrp1: Fix formatting of log message (missing space) |
| * cosmetic: Don't call the SDR "USRP" in error message |
| |
| [ Zydrunas Tamosevicius ] |
| * lms: Use same timestamp offset like when using LimeSDR via UHD |
| * lms: Reduce log level of "send buffer of len ..." |
| * lms: fix LMS_StartStream() handling for multiple channels |
| * lms: Reduce Rx gain from 47 to 34 dB |
| |
| [ Alexander Couzens ] |
| * debian: add patches for debian8 |
| |
| [ Oliver Smith ] |
| * Add long parameters (--help, --version, ...) |
| * build manuals moved here from osmo-gsm-manuals.git |
| * Fix DISTCHECK_CONFIGURE_FLAGS override |
| * contrib/jenkins.sh: build and publish manuals |
| * jenkins.sh: run "make distcheck" |
| * contrib: fix makedistcheck with disabled systemd |
| * osmo-trx.cpp: move comma_delimited_to_vector() to Utils.cpp |
| * LMSDevice: make use of dev-args in osmo-trx.cfg |
| * LMSDeviceTest: fix link errors on OBS |
| |
| [ Neels Hofmeyr ] |
| * Importing history from osmo-gsm-manuals.git |
| |
| [ d0gtail ] |
| * UHDDevice: log exception information on device open failure |
| |
| -- Harald Welte <laforge@gnumonks.org> Sun, 20 Jan 2019 19:35:04 +0100 |
| |
| osmo-trx (0.4.0) unstable; urgency=medium |
| |
| [ Neels Hofmeyr ] |
| * jenkins: use osmo-clean-workspace.sh before and after build |
| |
| [ Harald Welte ] |
| * SocketsTest: Fix printing of non-nul-terminated string |
| * Revert "debian: Remove osmo-trx-usrp1 until we can build libusrp1.deb" |
| * debian/control: Remove "Maintainer" from binary package section |
| * debian/rules: Make sure we always require libusrp |
| * debian: Ensure USRP1 firmware is part of osmo-trx-usrp1 |
| * debian/control: Add build dependency to libusrp-dev |
| * update .gitignore for new executable names |
| * osmo-trx: s/GSM Core Address/GSM BTS Address/ |
| |
| [ Piotr Krysik ] |
| * UHDDevice.cpp: add USRP B205mini support |
| |
| [ Max ] |
| * Mark release target as virtual |
| * Remove outdated references to OpenBTS |
| * Remove unused headers |
| * Update installation instructions |
| * Update legal disclaimer |
| * Update license notes |
| * tests: null-terminate buffer |
| |
| [ Pau Espin Pedrol ] |
| * cosmetic: Remove trailing whitespace |
| * Logger: Stop using Log.Alarms.Max from config |
| * Logger: Stop using Log.File and Log.Level from config |
| * Drop use of ConfigurationTable gConfig |
| * Remove Configuration module and libsqlite dependency |
| * cosmetic: AUTHORS: fix trailing whitespace |
| * Set up GNU Autotest infrastructure |
| * tests: InterThread: adapt to have reproducible output and enable autotest |
| * tests: Timeval: adapt to have reproducible output and enable autotest |
| * tests: Log: adapt to have reproducible output and enable autotest |
| * Sockets.cpp: Fix initialization of UDD socket |
| * tests: Sockets: adapt to have reproducible output and enable autotest |
| * utils/convolvtest: Remove uneeded libosmocore dependency |
| * Move ARCH_LA to Makefile.common |
| * tests: Migrate convtest util to autotest infrastructure |
| * arm/convert.c: Fix compilation error |
| * arm/convert.c: Add missing convert_init implementation |
| * .gitignore: Add missing test related files |
| * Remove UDDSocket class |
| * tests: SocketTests: Pick OS-assigned instead of setting one manually |
| * tests: SocketsTest: Avoid hang forever if test fails |
| * tests: SocketsTest: Fail test on write fail |
| * tests: TimevalTest: refactor and avoid double comparison |
| * contrib/jenkins.sh: Use qemu+proot+debootstrap to run tests with ARM instruction set |
| * tests: convolve: Disable due to difference in output in different archs |
| * Remove unneeded libdl dependency |
| * Fix whitespace |
| * Add support to set Rx/TxAntenna |
| * UHDDevice: Initialize async_event_thrd in constructor |
| * Logger: Drop unused gLogEarly |
| * Logger: Remove unused logging macros |
| * Logger: get rid of alarm APIs |
| * Logger: Drop syslog support |
| * Logger: Drop support to log into file |
| * Logger: Remove unused includes |
| * Logger: Remove gLogToConsole flag |
| * configure.ac: Check for pkg-config |
| * Depend on libosmocore |
| * osmo-trx: set up signals using libosmocore helpers |
| * osmo-trx: Set up talloc ctx |
| * debian: Depend on libtalloc and libosmocore |
| * Add initial support for logging, vty, ctrl |
| * Logger: Use libosmocore logging system |
| * osmo-trx.cpp: Move trx start and stop to helper functions |
| * Move enums required by VTY to a separate header |
| * vty: Implement VTY cfg parsing for current parameters |
| * doc: Add sample cfg file for LimeSDR |
| * osmo-trx: Use VTY cfg structures while still allowing cmd line options |
| * osmo-trx: Re-introduce -l cmd line parameter |
| * Makefile.am: Avoid using subdir if arch is not required |
| * Build Transceiver52M/common as an .la lib |
| * use osmo_init_logging2() |
| * tests: Makefile.am: Fix typo in include path |
| * configure.ac: Add --enable-sanitize option |
| * Move arch specific fiels to arch subdir |
| * Move device specific files to device subdir |
| * Change configure define USRP1 to DEVICE_USRP1 |
| * Move device specific code out of radioInterface |
| * Transceiver: Move device specific code to radioDevice class |
| * Build one osmo-trx binary for each device support enabled |
| * Logger: Print correct source file and line number |
| * Transceiver: log timing info of stale bursts |
| * build: Fix make distcheck |
| * build: More OBS build failure fixes |
| * jenkins.sh: Enable build of osmo-trx-usrp1 |
| * debian: Remove osmo-trx-usrp1 until we can build libusrp1.deb |
| * debian: Fix OBS build |
| * build: Fix OBS build for ARM |
| * git-version-gen: Take into account tags not in master |
| |
| [ Alexander Huemer ] |
| * Unbreak `./configure --with-usrp1` build |
| * Fix USRP1 build with support for setting Rx/TxAntenna |
| |
| [ Alexander Couzens ] |
| * jenkins.sh: fix the download url if the qemu image wasn't setup |
| * jenkins.sh: cleanup always the workspace |
| * jenkins.sh: change qemu-img default location to $HOME/qemu-img instead of /opt/qemu-img |
| |
| [ Vadim Yanitskiy ] |
| * Transceiver.cpp: use a define for the MAX_PACKET_LENGTH |
| * Transceiver.cpp: properly zero-terminate received commands |
| * Transceiver.cpp: use pointer arithmetics for CMD parsing |
| * Transceiver.cpp: fix incorrect format string for SETTSC |
| * Transceiver.cpp: prevent out-of-range array access |
| |
| [ Martin Hauke ] |
| * configure.ac: Fix typo |
| |
| [ Philipp Maier ] |
| * doc: add example config for usrp B200 series |
| |
| -- Pau Espin Pedrol <pespin@sysmocom.de> Thu, 03 May 2018 16:23:29 +0200 |
| |
| osmo-trx (0.2.0) unstable; urgency=medium |
| |
| [ Alexander Chemeris ] |
| * EDGE: Add support for UmTRX. |
| * Common: Get rid of a compilation warning. |
| * Common: Make sure gLogEarly() log to the same facilities as the normal log. |
| * transceiver: Properly handle MAXDLY. |
| * transceiver: Add an option to generate random Access Bursts. |
| * osmo-trx: Output Rx SPS as a part of configuration output. |
| * transceiver: Do not pass transceiver state struct to function where it's not used. |
| * makefile: Fix build from an external path. |
| * radioDevice: GSMRATE macro must have parentheses around its definition. |
| * uhd: Fix comment. |
| * radioInterface: Initialize power scale with a meaningful default. |
| * transceiver: Log channel number in DEBUG output of demoded bursts. |
| * transceiver: Add an option to emulate a RACH delay in random filler mode. |
| * UHD: Initial LimeSDR support. |
| * CommonLibs: Remove unused files. |
| * sigProcLib: Typo sybols -> symbols |
| * radioBuffer: Remove extra ; at the end of inline function definitions. |
| * sigProcLib: Fix documentation, sync argument names in .cpp and .h files. |
| * sigProcLib: make energyDetect() simpler by returning actual energy. |
| * sigProcLib: Rename demodulateBurst() to demodGmskBurst() for clarity. |
| * sigProcLib: Slice SoftVector instead of signalVector for GMSK demod. |
| * Call vectorSlicer() right before packing bits for transmission to osmo-bts. |
| * CommonLibs: Print soft bits with less confidence to console when printing a soft vector. |
| * BitVector: Remove convolutional codec - we don't use it in osmo-trx. |
| * BitVector: Convert SoftVector from 0..1 to -1..+1 soft bits. |
| * signalVector: Implement segment(). |
| * vector: Introduce segmentMove() method to move data inside of a vector. |
| * vector: Introduce shrink() function to shrink vector size without loosing data. |
| * Move CorrType type from Transceiver to sigProcLib. |
| * sigProcLib: rename signalError type to SignalError. |
| * Move Transceiver::detectBurst() to sigProcLib to make it reusable. |
| * Move BURST_THRESH from Transceiver.cpp to sigProcLib.h to make it reusable. |
| * sigProcLib: Add operator<< to print CorrType to a string. |
| * sigProcLib.h: Fix whitespaces. No non-whitespace changes. |
| * Move Transceiver::demodulate() to sigProcLib to make it reusable. |
| * sigProcLib: constify signalVector arguments for detectBurst() functions. |
| * sigProcLib: Constify demodulation functions burst argument. |
| * sigProcLib: Fix number of tail bits in random Normal Bursts and zero Stealing Bits. |
| * Configuration: Variables allocated with 'new' must be freed with 'delete'. |
| * BitVector: Remove Generator class. |
| * PRBS: a Pseudo-random binary sequence (PRBS) generator class. |
| |
| [ Tom Tsou ] |
| * EDGE: Fix USRP B210 device support |
| * uhd: Correct timing alignment in 8-PSK and GMSK downlink bursts |
| * EDGE: Fix demodulation slicer input |
| * common: Restrict UDP binding to localhost only |
| * common: Add mandatory length field to UDP receive calls |
| * uhd: Update default E3XX settings |
| * uhd: Set default Tx sampling to 4 sps |
| * uhd: Make device offset check a private method |
| * uhd: Set minimum UHD version requirement for E3XX |
| * sigproc: Expand RACH, TSC, and EDGE correlation windows |
| * transceiver: Do not report error on SETTSC when radio is on |
| * transceiver: Add Rx samples-per-symbol option |
| * radioInterface: Convert diversity argument to general type |
| * iface: Add inner ring-buffer implementation |
| * mcbts: Add multi-ARFCN channelizing filters |
| * mcbts: Add multi-ARFCN radio support |
| * sigproc: Adjust burst detection threshold criteria |
| * egprs: Enable 8-PSK length vectors on the Tx interface |
| * egprs: Enable 8-PSK burst detection when EDGE is enabled |
| * transceiver: Remove HANDOVER warnings |
| * mcbts: Allow out of order channel setup |
| * radioInterface: Fix multi-channel buffer index bug |
| * uhd: Add command line option for GPS reference |
| * transceiver: Fix mixed GSMK / 8-PSK transmission |
| * transceiver: Fix 4 SPS receive TOA value |
| * sigproc: Fix missing 8-PSK tail symbols |
| * uhd: Update USRP2/N200/N210 for 4 SPS Rx |
| * sigproc: Match differential GMSK start/end bits to tail bits |
| * uhd: Add missing B200 sample timing for 4 SPS receive |
| * transceiver: Fix command build warning |
| * uhd: Set minimum supported version to 3.9.0 |
| * uhd: Add X300 sample timing for 4 SPS |
| * Revert "uhd: Set minimum supported version to 3.9.0" |
| * uhd: Add support for UHD-3.11 logging control |
| * uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz |
| * Resampler: Fix initialization return checking |
| * sigProcLib: Remove unreachable code and no-effect checks |
| * sigProcLib: Check return status on downsampling |
| * sigProcLib: Fix negative value check on unsigned value |
| * Resampler: Fix non-array delete for filter taps |
| * Transceiver: Remove unsigned negative compares |
| * Configuration: Fix const and signedness compile warnings |
| * config: Remove OpenBTS style sqlite configuration |
| * radioInterface: Remove UmTRX 'diversity' option |
| * build: Require and check for gcc C++11 support |
| * uhd: Use map container for for device parameter access |
| * sigProcLib: Remove unused functions from public interface |
| * uhd: Add non-UmTRX channel swap support |
| * uhd: Fix Tx-RX timing offset setting |
| * uhd: Fix USRP2/N200/N210 device detection |
| * transceiver: Fix POWEROFF crash on USRP2/N200/X300 devices |
| * sigProcLib: Fix complex/real vector flag in Laurent modulator |
| * sigProcLib: Remove heap based signal vector allocations |
| * common: Declare explicit Vector move constructor |
| * sigProcLib: Remove trigonometric tables |
| * sigProcLib: Use explicit NaN check in sinc table generation |
| * sigProcLib: Replace dynamically allocated resampling buffers |
| * sigProcLib: Specify standard namespace for isnan() |
| * uhd: Always specify samples-per-symbol for device lookup |
| * LimeSDR: set approximate tx offset value to make GSM work |
| |
| [ Neels Hofmeyr ] |
| * add basic .gitignore |
| * configure.ac: check for boost/config.hpp header |
| * The INSTALL file is being overwritten by autoreconf, but it is committed as empty file. As a result, the INSTALL file always shows as modified. Instead, remove INSTALL from git and ignore it. |
| * add contrib/jenkins.sh, for gerrit build bot |
| |
| [ pierre.baudry ] |
| * transceiver: Fix mismatched allocations and deallocations |
| |
| [ Holger Hans Peter Freyther ] |
| * debian: Require fftw3 header files for osmo-trx |
| |
| [ Max ] |
| * Add gerrit settings |
| * Integrate Debian packaging changes |
| * Remove embedded sqlite3 |
| * Fix building against sqlite3 |
| * Add autoconf-archive to dependencies |
| * debian: remove obsolete dependency |
| * deb: remove unused dependency |
| * Remove redundant explicit dependency |
| * Use release helper from libosmocore |
| |
| [ Ruben Undheim ] |
| * Do not embed sqlite3 when building |
| |
| [ Philipp Maier ] |
| * buildenv: Turn off native architecture builds |
| * cosmetic: Make parameter lists uniform |
| * Add test program to verify convolution implementation |
| * ssedetect: Add runtime CPU detection |
| * cosmetic: remove code duplication |
| * buildenv: Make build CPU invariant |
| * buildenv: Split up SSE3 and SSE4.1 code |
| * cosmetic: Add info about SSE support |
| |
| [ Vadim Yanitskiy ] |
| * buildenv: correct the ax_sse macro description |
| * buildenv: actually strip unused cpuid functionality |
| * buildenv: fix build on systems without SIMD support |
| * buildenv: cosmetic changes |
| * buildenv: check for __builtin_cpu_supports call support |
| * ssedetect: call __builtin_cpu_supports() only if supported |
| |
| [ Pau Espin Pedrol ] |
| * cosmetic: transciever: Remove trailing whitespaces |
| * transceiver: Avoid sending clock indications when trx is not powered on |
| * Add -j option to bind to specific address |
| |
| [ ignasj ] |
| * LimeSDR: Change device detection to work with USB and PCIe versions |
| * LimeSDR: change tx window type to TX_WINDOW_FIXED |
| * LimeSDR: Fix sample value range |
| |
| [ Harald Welte ] |
| * Add '-t' command line option to enable SCHED_RR |
| * Import git-version-gen and update AC_INIT() |
| |
| -- Harald Welte <laforge@gnumonks.org> Sat, 28 Oct 2017 17:52:32 +0200 |
| |
| osmo-trx (0.1.9) trusty; urgency=medium |
| |
| * Ask Ivan, really |
| |
| -- Kirill Zakharenko <earwin@gmail.com> Thu, 16 Jul 2015 12:13:46 +0000 |
| |
| osmo-trx (0.1.8) precise; urgency=low |
| |
| * Initial release (Closes: #nnnn) <nnnn is the bug number of your ITP |
| |
| -- Ivan Klyuchnikov <Ivan.Kluchnikov@fairwaves.ru> Sun, 9 Mar 2014 14:10:10 +0400 |