doc/manuals/vty/sgsn_vty_reference.xml

<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
  <node id='0'>
  </node>
  <node id='1'>
    <command id='show version'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='version' doc='Displays program version' />
      </params>
    </command>
    <command id='show online-help'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='online-help' doc='Online help' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='enable'>
      <params>
        <param name='enable' doc='Turn on privileged mode command' />
      </params>
    </command>
    <command id='terminal length &lt;0-512&gt;'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='length' doc='Set number of lines on a screen' />
        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
      </params>
    </command>
    <command id='terminal no length'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='length' doc='Set number of lines on a screen' />
      </params>
    </command>
    <command id='echo .MESSAGE'>
      <params>
        <param name='echo' doc='Echo a message back to the vty' />
        <param name='.MESSAGE' doc='The message to echo' />
      </params>
    </command>
    <command id='who'>
      <params>
        <param name='who' doc='Display who is on vty' />
      </params>
    </command>
    <command id='show history'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='history' doc='Display the session command history' />
      </params>
    </command>
    <command id='logging enable'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='enable' doc='Enables logging to this vty' />
      </params>
    </command>
    <command id='logging disable'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='disable' doc='Disables logging to this vty' />
      </params>
    </command>
    <command id='logging filter all (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='all' doc='Do you want to log all messages?' />
        <param name='0' doc='Only print messages matched by other filters' />
        <param name='1' doc='Bypass filter and print all messages' />
      </params>
    </command>
    <command id='logging color (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='color' doc='Configure color-printing for log messages' />
        <param name='0' doc='Don&apos;t use color for printing messages' />
        <param name='1' doc='Use color for printing messages' />
      </params>
    </command>
    <command id='logging timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp' />
      </params>
    </command>
    <command id='logging print extended-timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='print' doc='Log output settings' />
        <param name='extended-timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
      </params>
    </command>
    <command id='logging print category (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='print' doc='Log output settings' />
        <param name='category' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem name' />
      </params>
    </command>
    <command id='logging set-log-mask MASK'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='set-log-mask' doc='Set the logmask of this logging target' />
        <param name='MASK' doc='The logmask to use' />
      </params>
    </command>
    <command id='logging set log mask MASK'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='set' doc='Decide which categories to output.' />
        <param name='log' doc='Log commands' />
        <param name='mask' doc='Mask commands' />
        <param name='MASK' doc='The logmask to use' />
      </params>
    </command>
    <command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats) (everything|debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='all' doc='Global setting for all subsystems' />
        <param name='mm' doc='Layer3 Mobility Management (MM)' />
        <param name='pag' doc='Paging Subsystem' />
        <param name='meas' doc='Radio Measurement Processing' />
        <param name='ref' doc='Reference Counting' />
        <param name='gprs' doc='GPRS Packet Service' />
        <param name='ns' doc='GPRS Network Service (NS)' />
        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
        <param name='slhc' doc='RFC1144 TCP/IP Header compression (SLHC)' />
        <param name='ranap' doc='RAN Application Part (RANAP)' />
        <param name='sua' doc='SCCP User Adaptation (SUA)' />
        <param name='v42bis' doc='V.42bis data compression (SNDCP)' />
        <param name='lglobal' doc='Library-internal global log family' />
        <param name='llapd' doc='LAPD in libosmogsm' />
        <param name='linp' doc='A-bis Intput Subsystem' />
        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
        <param name='lmi' doc='A-bis Input Driver for Signalling' />
        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
        <param name='lctrl' doc='Control Interface' />
        <param name='lgtp' doc='GPRS GTP library' />
        <param name='lstats' doc='Statistics messages and logging' />
        <param name='everything' doc='Don&apos;t use. It doesn&apos;t log anything' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='show logging vty'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='logging' doc='Show current logging configuration' />
        <param name='vty' doc='Show current logging configuration for this vty' />
      </params>
    </command>
    <command id='show alarms'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='alarms' doc='Show current logging configuration' />
      </params>
    </command>
    <command id='show stats'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='stats' doc='Show statistical values' />
      </params>
    </command>
    <command id='show stats level (global|peer|subscriber)'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='stats' doc='Show statistical values' />
        <param name='level' doc='Set the maximum group level' />
        <param name='global' doc='Show global groups only' />
        <param name='peer' doc='Show global and network peer related groups' />
        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
      </params>
    </command>
    <command id='show asciidoc counters'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='asciidoc' doc='Asciidoc generation' />
        <param name='counters' doc='Generate table of all registered counters' />
      </params>
    </command>
    <command id='show sgsn'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='sgsn' doc='Display information about the SGSN' />
      </params>
    </command>
    <command id='show mm-context imsi IMSI [pdp]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='mm-context' doc='MM Context' />
        <param name='imsi' doc='Identify by IMSI' />
        <param name='IMSI' doc='IMSI of the MM Context' />
        <param name='[pdp]' doc='Include PDP Context Information' />
      </params>
    </command>
    <command id='show mm-context all [pdp]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='mm-context' doc='MM Context' />
        <param name='all' doc='All MM Contexts' />
        <param name='[pdp]' doc='Include PDP Context Information' />
      </params>
    </command>
    <command id='show pdp-context all'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='pdp-context' doc='Display information on PDP Context' />
        <param name='all' doc='Show everything' />
      </params>
    </command>
    <command id='show subscriber cache'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='subscriber' doc='Show information about subscribers' />
        <param name='cache' doc='Display contents of subscriber cache' />
      </params>
    </command>
    <command id='show ns'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='ns' doc='Display information about the NS protocol' />
      </params>
    </command>
    <command id='show ns stats'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='ns' doc='Display information about the NS protocol' />
        <param name='stats' doc='Include statistics' />
      </params>
    </command>
    <command id='show ns (nsei|nsvc) &lt;0-65535&gt; [stats]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='ns' doc='Display information about the NS protocol' />
        <param name='nsei' doc='Select one NSE by its NSE Identifier' />
        <param name='nsvc' doc='Select one NSE by its NS-VC Identifier' />
        <param name='&lt;0-65535&gt;' doc='The Identifier of selected type' />
        <param name='[stats]' doc='Include Statistics' />
      </params>
    </command>
    <command id='logging filter nsvc (nsei|nsvci) &lt;0-65535&gt;'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='nsvc' doc='Filter based on NS Virtual Connection' />
        <param name='nsei' doc='Identify NS-VC by NSEI' />
        <param name='nsvci' doc='Identify NS-VC by NSVCI' />
        <param name='&lt;0-65535&gt;' doc='Numeric identifier' />
      </params>
    </command>
    <command id='show bssgp'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='bssgp' doc='Show information about the BSSGP protocol' />
      </params>
    </command>
    <command id='show bssgp stats'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='bssgp' doc='Show information about the BSSGP protocol' />
        <param name='stats' doc='Include statistics' />
      </params>
    </command>
    <command id='show bssgp nsei &lt;0-65535&gt; [stats]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='bssgp' doc='Show information about the BSSGP protocol' />
        <param name='nsei' doc='Show all BVCs on one NSE' />
        <param name='&lt;0-65535&gt;' doc='The NSEI' />
        <param name='[stats]' doc='Include Statistics' />
      </params>
    </command>
    <command id='logging filter bvc nsei &lt;0-65535&gt; bvci &lt;0-65535&gt;'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='bvc' doc='Filter based on BSSGP Virtual Connection' />
        <param name='nsei' doc='NSEI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='Network Service Entity Identifier (NSEI)' />
        <param name='bvci' doc='BVCI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='BSSGP Virtual Connection Identifier (BVCI)' />
      </params>
    </command>
    <command id='bssgp bvc nsei &lt;0-65535&gt; bvci &lt;0-65535&gt; reset'>
      <params>
        <param name='bssgp' doc='Initiate BVC RESET procedure for a given NSEI and BVCI' />
        <param name='bvc' doc='Filter based on BSSGP Virtual Connection' />
        <param name='nsei' doc='NSEI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='Network Service Entity Identifier (NSEI)' />
        <param name='bvci' doc='BVCI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='BSSGP Virtual Connection Identifier (BVCI)' />
        <param name='reset' doc='Perform reset procedure' />
      </params>
    </command>
    <command id='show llc'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='llc' doc='Display information about the LLC protocol' />
      </params>
    </command>
    <command id='show sndcp'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='sndcp' doc='Display information about the SNDCP protocol' />
      </params>
    </command>
  </node>
  <node id='2'>
  </node>
  <node id='3'>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='disable'>
      <params>
        <param name='disable' doc='Turn off privileged mode command' />
      </params>
    </command>
    <command id='configure terminal'>
      <params>
        <param name='configure' doc='Configuration from vty interface' />
        <param name='terminal' doc='Configuration terminal' />
      </params>
    </command>
    <command id='copy running-config startup-config'>
      <params>
        <param name='copy' doc='Copy configuration' />
        <param name='running-config' doc='Copy running config to... ' />
        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
      </params>
    </command>
    <command id='show startup-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='startup-config' doc='Contentes of startup configuration' />
      </params>
    </command>
    <command id='show version'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='version' doc='Displays program version' />
      </params>
    </command>
    <command id='show online-help'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='online-help' doc='Online help' />
      </params>
    </command>
    <command id='terminal length &lt;0-512&gt;'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='length' doc='Set number of lines on a screen' />
        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
      </params>
    </command>
    <command id='terminal no length'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='length' doc='Set number of lines on a screen' />
      </params>
    </command>
    <command id='echo .MESSAGE'>
      <params>
        <param name='echo' doc='Echo a message back to the vty' />
        <param name='.MESSAGE' doc='The message to echo' />
      </params>
    </command>
    <command id='who'>
      <params>
        <param name='who' doc='Display who is on vty' />
      </params>
    </command>
    <command id='show history'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='history' doc='Display the session command history' />
      </params>
    </command>
    <command id='terminal monitor'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='monitor' doc='Copy debug output to the current terminal line' />
      </params>
    </command>
    <command id='terminal no monitor'>
      <params>
        <param name='terminal' doc='Set terminal line parameters' />
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='monitor' doc='Copy debug output to the current terminal line' />
      </params>
    </command>
    <command id='logging enable'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='enable' doc='Enables logging to this vty' />
      </params>
    </command>
    <command id='logging disable'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='disable' doc='Disables logging to this vty' />
      </params>
    </command>
    <command id='logging filter all (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='all' doc='Do you want to log all messages?' />
        <param name='0' doc='Only print messages matched by other filters' />
        <param name='1' doc='Bypass filter and print all messages' />
      </params>
    </command>
    <command id='logging color (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='color' doc='Configure color-printing for log messages' />
        <param name='0' doc='Don&apos;t use color for printing messages' />
        <param name='1' doc='Use color for printing messages' />
      </params>
    </command>
    <command id='logging timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp' />
      </params>
    </command>
    <command id='logging print extended-timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='print' doc='Log output settings' />
        <param name='extended-timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
      </params>
    </command>
    <command id='logging print category (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='print' doc='Log output settings' />
        <param name='category' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem name' />
      </params>
    </command>
    <command id='logging set-log-mask MASK'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='set-log-mask' doc='Set the logmask of this logging target' />
        <param name='MASK' doc='The logmask to use' />
      </params>
    </command>
    <command id='logging set log mask MASK'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='set' doc='Decide which categories to output.' />
        <param name='log' doc='Log commands' />
        <param name='mask' doc='Mask commands' />
        <param name='MASK' doc='The logmask to use' />
      </params>
    </command>
    <command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats) (everything|debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='all' doc='Global setting for all subsystems' />
        <param name='mm' doc='Layer3 Mobility Management (MM)' />
        <param name='pag' doc='Paging Subsystem' />
        <param name='meas' doc='Radio Measurement Processing' />
        <param name='ref' doc='Reference Counting' />
        <param name='gprs' doc='GPRS Packet Service' />
        <param name='ns' doc='GPRS Network Service (NS)' />
        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
        <param name='slhc' doc='RFC1144 TCP/IP Header compression (SLHC)' />
        <param name='ranap' doc='RAN Application Part (RANAP)' />
        <param name='sua' doc='SCCP User Adaptation (SUA)' />
        <param name='v42bis' doc='V.42bis data compression (SNDCP)' />
        <param name='lglobal' doc='Library-internal global log family' />
        <param name='llapd' doc='LAPD in libosmogsm' />
        <param name='linp' doc='A-bis Intput Subsystem' />
        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
        <param name='lmi' doc='A-bis Input Driver for Signalling' />
        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
        <param name='lctrl' doc='Control Interface' />
        <param name='lgtp' doc='GPRS GTP library' />
        <param name='lstats' doc='Statistics messages and logging' />
        <param name='everything' doc='Don&apos;t use. It doesn&apos;t log anything' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='show logging vty'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='logging' doc='Show current logging configuration' />
        <param name='vty' doc='Show current logging configuration for this vty' />
      </params>
    </command>
    <command id='show alarms'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='alarms' doc='Show current logging configuration' />
      </params>
    </command>
    <command id='show stats'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='stats' doc='Show statistical values' />
      </params>
    </command>
    <command id='show stats level (global|peer|subscriber)'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='stats' doc='Show statistical values' />
        <param name='level' doc='Set the maximum group level' />
        <param name='global' doc='Show global groups only' />
        <param name='peer' doc='Show global and network peer related groups' />
        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
      </params>
    </command>
    <command id='show asciidoc counters'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='asciidoc' doc='Asciidoc generation' />
        <param name='counters' doc='Generate table of all registered counters' />
      </params>
    </command>
    <command id='show sgsn'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='sgsn' doc='Display information about the SGSN' />
      </params>
    </command>
    <command id='show mm-context imsi IMSI [pdp]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='mm-context' doc='MM Context' />
        <param name='imsi' doc='Identify by IMSI' />
        <param name='IMSI' doc='IMSI of the MM Context' />
        <param name='[pdp]' doc='Include PDP Context Information' />
      </params>
    </command>
    <command id='show mm-context all [pdp]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='mm-context' doc='MM Context' />
        <param name='all' doc='All MM Contexts' />
        <param name='[pdp]' doc='Include PDP Context Information' />
      </params>
    </command>
    <command id='show pdp-context all'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='pdp-context' doc='Display information on PDP Context' />
        <param name='all' doc='Show everything' />
      </params>
    </command>
    <command id='show subscriber cache'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='subscriber' doc='Show information about subscribers' />
        <param name='cache' doc='Display contents of subscriber cache' />
      </params>
    </command>
    <command id='update-subscriber imsi IMSI insert auth-triplet &lt;1-5&gt; sres SRES rand RAND kc KC'>
      <params>
        <param name='update-subscriber' doc='Update subscriber list' />
        <param name='imsi' doc='Use the IMSI to select the subscriber' />
        <param name='IMSI' doc='The IMSI' />
        <param name='insert' doc='Insert data into the subscriber record' />
        <param name='auth-triplet' doc='Update authentication triplet' />
        <param name='&lt;1-5&gt;' doc='Triplet index' />
        <param name='sres' doc='Set SRES value' />
        <param name='SRES' doc='SRES value (4 byte) in hex' />
        <param name='rand' doc='Set RAND value' />
        <param name='RAND' doc='RAND value (16 byte) in hex' />
        <param name='kc' doc='Set Kc value' />
        <param name='KC' doc='Kc value (8 byte) in hex' />
      </params>
    </command>
    <command id='update-subscriber imsi IMSI create'>
      <params>
        <param name='update-subscriber' doc='Update subscriber list' />
        <param name='imsi' doc='Use the IMSI to select the subscriber' />
        <param name='IMSI' doc='The IMSI' />
        <param name='create' doc='Create a subscriber entry' />
      </params>
    </command>
    <command id='update-subscriber imsi IMSI destroy'>
      <params>
        <param name='update-subscriber' doc='Update subscriber list' />
        <param name='imsi' doc='Use the IMSI to select the subscriber' />
        <param name='IMSI' doc='The IMSI' />
        <param name='destroy' doc='Destroy a subscriber entry' />
      </params>
    </command>
    <command id='update-subscriber imsi IMSI cancel (update-procedure|subscription-withdraw)'>
      <params>
        <param name='update-subscriber' doc='Update subscriber list' />
        <param name='imsi' doc='Use the IMSI to select the subscriber' />
        <param name='IMSI' doc='The IMSI' />
        <param name='cancel' doc='Cancel (remove) subscriber record' />
        <param name='update-procedure' doc='The MS moved to another SGSN' />
        <param name='subscription-withdraw' doc='The subscription is no longer valid' />
      </params>
    </command>
    <command id='update-subscriber imsi IMSI update-location-result (ok|system-failure|data-missing|unexpected-data-value|unknown-subscriber|roaming-not-allowed)'>
      <params>
        <param name='update-subscriber' doc='Update subscriber list' />
        <param name='imsi' doc='Use the IMSI to select the subscriber' />
        <param name='IMSI' doc='The IMSI' />
        <param name='update-location-result' doc='Complete the update location procedure' />
        <param name='ok' doc='The update location request succeeded' />
        <param name='system-failure' doc='Force error code SystemFailure' />
        <param name='data-missing' doc='Force error code DataMissing' />
        <param name='unexpected-data-value' doc='Force error code UnexpectedDataValue' />
        <param name='unknown-subscriber' doc='Force error code UnknownSubscriber' />
        <param name='roaming-not-allowed' doc='Force error code RoamingNotAllowed' />
      </params>
    </command>
    <command id='update-subscriber imsi IMSI update-auth-info'>
      <params>
        <param name='update-subscriber' doc='Update subscriber list' />
        <param name='imsi' doc='Use the IMSI to select the subscriber' />
        <param name='IMSI' doc='The IMSI' />
        <param name='update-auth-info' doc='Complete the send authentication info procedure' />
      </params>
    </command>
    <command id='show ns'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='ns' doc='Display information about the NS protocol' />
      </params>
    </command>
    <command id='show ns stats'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='ns' doc='Display information about the NS protocol' />
        <param name='stats' doc='Include statistics' />
      </params>
    </command>
    <command id='show ns (nsei|nsvc) &lt;0-65535&gt; [stats]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='ns' doc='Display information about the NS protocol' />
        <param name='nsei' doc='Select one NSE by its NSE Identifier' />
        <param name='nsvc' doc='Select one NSE by its NS-VC Identifier' />
        <param name='&lt;0-65535&gt;' doc='The Identifier of selected type' />
        <param name='[stats]' doc='Include Statistics' />
      </params>
    </command>
    <command id='logging filter nsvc (nsei|nsvci) &lt;0-65535&gt;'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='nsvc' doc='Filter based on NS Virtual Connection' />
        <param name='nsei' doc='Identify NS-VC by NSEI' />
        <param name='nsvci' doc='Identify NS-VC by NSVCI' />
        <param name='&lt;0-65535&gt;' doc='Numeric identifier' />
      </params>
    </command>
    <command id='nsvc (nsei|nsvci) &lt;0-65535&gt; (block|unblock|reset)'>
      <params>
        <param name='nsvc' doc='Perform an operation on a NSVC' />
        <param name='nsei' doc='NSEI to identify NS-VC Identifier (NS-VCI)' />
        <param name='nsvci' doc='NS-VC Identifier (NS-VCI)' />
        <param name='&lt;0-65535&gt;' doc='The NSEI' />
        <param name='block' doc='Initiate BLOCK procedure' />
        <param name='unblock' doc='Initiate UNBLOCK procedure' />
        <param name='reset' doc='Initiate RESET procedure' />
      </params>
    </command>
    <command id='show bssgp'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='bssgp' doc='Show information about the BSSGP protocol' />
      </params>
    </command>
    <command id='show bssgp stats'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='bssgp' doc='Show information about the BSSGP protocol' />
        <param name='stats' doc='Include statistics' />
      </params>
    </command>
    <command id='show bssgp nsei &lt;0-65535&gt; [stats]'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='bssgp' doc='Show information about the BSSGP protocol' />
        <param name='nsei' doc='Show all BVCs on one NSE' />
        <param name='&lt;0-65535&gt;' doc='The NSEI' />
        <param name='[stats]' doc='Include Statistics' />
      </params>
    </command>
    <command id='logging filter bvc nsei &lt;0-65535&gt; bvci &lt;0-65535&gt;'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='bvc' doc='Filter based on BSSGP Virtual Connection' />
        <param name='nsei' doc='NSEI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='Network Service Entity Identifier (NSEI)' />
        <param name='bvci' doc='BVCI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='BSSGP Virtual Connection Identifier (BVCI)' />
      </params>
    </command>
    <command id='bssgp bvc nsei &lt;0-65535&gt; bvci &lt;0-65535&gt; reset'>
      <params>
        <param name='bssgp' doc='Initiate BVC RESET procedure for a given NSEI and BVCI' />
        <param name='bvc' doc='Filter based on BSSGP Virtual Connection' />
        <param name='nsei' doc='NSEI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='Network Service Entity Identifier (NSEI)' />
        <param name='bvci' doc='BVCI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='BSSGP Virtual Connection Identifier (BVCI)' />
        <param name='reset' doc='Perform reset procedure' />
      </params>
    </command>
    <command id='show llc'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='llc' doc='Display information about the LLC protocol' />
      </params>
    </command>
    <command id='show sndcp'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='sndcp' doc='Display information about the SNDCP protocol' />
      </params>
    </command>
  </node>
  <node id='4'>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='end'>
      <params>
        <param name='end' doc='End current mode and change to enable mode.' />
      </params>
    </command>
    <command id='hostname WORD'>
      <params>
        <param name='hostname' doc='Set system&apos;s network name' />
        <param name='WORD' doc='This system&apos;s network name' />
      </params>
    </command>
    <command id='no hostname [HOSTNAME]'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='hostname' doc='Reset system&apos;s network name' />
        <param name='[HOSTNAME]' doc='Host name of this router' />
      </params>
    </command>
    <command id='password (8|) WORD'>
      <params>
        <param name='password' doc='Assign the terminal connection password' />
        <param name='8' doc='Specifies a HIDDEN password will follow' />
        <param name='' doc='dummy string ' />
        <param name='WORD' doc='The HIDDEN line password string' />
      </params>
    </command>
    <command id='password LINE'>
      <params>
        <param name='password' doc='Assign the terminal connection password' />
        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
      </params>
    </command>
    <command id='enable password (8|) WORD'>
      <params>
        <param name='enable' doc='Modify enable password parameters' />
        <param name='password' doc='Assign the privileged level password' />
        <param name='8' doc='Specifies a HIDDEN password will follow' />
        <param name='' doc='dummy string ' />
        <param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
      </params>
    </command>
    <command id='enable password LINE'>
      <params>
        <param name='enable' doc='Modify enable password parameters' />
        <param name='password' doc='Assign the privileged level password' />
        <param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
      </params>
    </command>
    <command id='no enable password'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='enable' doc='Modify enable password parameters' />
        <param name='password' doc='Assign the privileged level password' />
      </params>
    </command>
    <command id='banner motd default'>
      <params>
        <param name='banner' doc='Set banner string' />
        <param name='motd' doc='Strings for motd' />
        <param name='default' doc='Default string' />
      </params>
    </command>
    <command id='banner motd file [FILE]'>
      <params>
        <param name='banner' doc='Set banner' />
        <param name='motd' doc='Banner for motd' />
        <param name='file' doc='Banner from a file' />
        <param name='[FILE]' doc='Filename' />
      </params>
    </command>
    <command id='no banner motd'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='banner' doc='Set banner string' />
        <param name='motd' doc='Strings for motd' />
      </params>
    </command>
    <command id='service terminal-length &lt;0-512&gt;'>
      <params>
        <param name='service' doc='Set up miscellaneous service' />
        <param name='terminal-length' doc='System wide terminal length configuration' />
        <param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
      </params>
    </command>
    <command id='no service terminal-length [&lt;0-512&gt;]'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='service' doc='Set up miscellaneous service' />
        <param name='terminal-length' doc='System wide terminal length configuration' />
        <param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
      </params>
    </command>
    <command id='line vty'>
      <params>
        <param name='line' doc='Configure a terminal line' />
        <param name='vty' doc='Virtual terminal' />
      </params>
    </command>
    <command id='service advanced-vty'>
      <params>
        <param name='service' doc='Set up miscellaneous service' />
        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
      </params>
    </command>
    <command id='no service advanced-vty'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='service' doc='Set up miscellaneous service' />
        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
      </params>
    </command>
    <command id='show history'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='history' doc='Display the session command history' />
      </params>
    </command>
    <command id='log stderr'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='stderr' doc='Logging via STDERR of the process' />
      </params>
    </command>
    <command id='no log stderr'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='log' doc='Configure logging sub-system' />
        <param name='stderr' doc='Logging via STDERR of the process' />
      </params>
    </command>
    <command id='log file .FILENAME'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='file' doc='Logging to text file' />
        <param name='.FILENAME' doc='Filename' />
      </params>
    </command>
    <command id='no log file .FILENAME'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='log' doc='Configure logging sub-system' />
        <param name='file' doc='Logging to text file' />
        <param name='.FILENAME' doc='Filename' />
      </params>
    </command>
    <command id='log alarms &lt;2-32700&gt;'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='alarms' doc='Logging alarms to osmo_strrb' />
        <param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
      </params>
    </command>
    <command id='no log alarms'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='log' doc='Configure logging sub-system' />
        <param name='alarms' doc='Logging alarms to osmo_strrb' />
      </params>
    </command>
    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='syslog' doc='Logging via syslog' />
        <param name='authpriv' doc='Security/authorization messages facility' />
        <param name='cron' doc='Clock daemon (cron/at) facility' />
        <param name='daemon' doc='General system daemon facility' />
        <param name='ftp' doc='Ftp daemon facility' />
        <param name='lpr' doc='Line printer facility' />
        <param name='mail' doc='Mail facility' />
        <param name='news' doc='News facility' />
        <param name='user' doc='Generic facility' />
        <param name='uucp' doc='UUCP facility' />
      </params>
    </command>
    <command id='log syslog local &lt;0-7&gt;'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='syslog' doc='Logging via syslog' />
        <param name='local' doc='Syslog LOCAL facility' />
        <param name='&lt;0-7&gt;' doc='Local facility number' />
      </params>
    </command>
    <command id='no log syslog'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='log' doc='Configure logging sub-system' />
        <param name='syslog' doc='Logging via syslog' />
      </params>
    </command>
    <command id='log gsmtap [HOSTNAME]'>
      <params>
        <param name='log' doc='Configure logging sub-system' />
        <param name='gsmtap' doc='Logging via GSMTAP' />
        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
      </params>
    </command>
    <command id='stats reporter statsd'>
      <params>
        <param name='stats' doc='Configure stats sub-system' />
        <param name='reporter' doc='Configure a stats reporter' />
        <param name='statsd' doc='Report to a STATSD server' />
      </params>
    </command>
    <command id='no stats reporter statsd'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='stats' doc='Configure stats sub-system' />
        <param name='reporter' doc='Configure a stats reporter' />
        <param name='statsd' doc='Report to a STATSD server' />
      </params>
    </command>
    <command id='stats reporter log'>
      <params>
        <param name='stats' doc='Configure stats sub-system' />
        <param name='reporter' doc='Configure a stats reporter' />
        <param name='log' doc='Report to the logger' />
      </params>
    </command>
    <command id='no stats reporter log'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='stats' doc='Configure stats sub-system' />
        <param name='reporter' doc='Configure a stats reporter' />
        <param name='log' doc='Report to the logger' />
      </params>
    </command>
    <command id='stats interval &lt;1-65535&gt;'>
      <params>
        <param name='stats' doc='Configure stats sub-system' />
        <param name='interval' doc='Set the reporting interval' />
        <param name='&lt;1-65535&gt;' doc='Interval in seconds' />
      </params>
    </command>
    <command id='sgsn'>
      <params>
        <param name='sgsn' doc='Configure the SGSN' />
      </params>
    </command>
    <command id='ctrl'>
      <params>
        <param name='ctrl' doc='Configure the Control Interface' />
      </params>
    </command>
    <command id='ns'>
      <params>
        <param name='ns' doc='Configure the GPRS Network Service' />
      </params>
    </command>
    <command id='bssgp'>
      <params>
        <param name='bssgp' doc='Configure the GPRS BSS Gateway Protocol' />
      </params>
    </command>
  </node>
  <node id='7'>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='end'>
      <params>
        <param name='end' doc='End current mode and change to enable mode.' />
      </params>
    </command>
    <command id='logging filter all (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='all' doc='Do you want to log all messages?' />
        <param name='0' doc='Only print messages matched by other filters' />
        <param name='1' doc='Bypass filter and print all messages' />
      </params>
    </command>
    <command id='logging color (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='color' doc='Configure color-printing for log messages' />
        <param name='0' doc='Don&apos;t use color for printing messages' />
        <param name='1' doc='Use color for printing messages' />
      </params>
    </command>
    <command id='logging timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp' />
      </params>
    </command>
    <command id='logging print extended-timestamp (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='print' doc='Log output settings' />
        <param name='extended-timestamp' doc='Configure log message timestamping' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
      </params>
    </command>
    <command id='logging print category (0|1)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='print' doc='Log output settings' />
        <param name='category' doc='Configure log message' />
        <param name='0' doc='Don&apos;t prefix each log message' />
        <param name='1' doc='Prefix each log message with category/subsystem name' />
      </params>
    </command>
    <command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats) (everything|debug|info|notice|error|fatal)'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='level' doc='Set the log level for a specified category' />
        <param name='all' doc='Global setting for all subsystems' />
        <param name='mm' doc='Layer3 Mobility Management (MM)' />
        <param name='pag' doc='Paging Subsystem' />
        <param name='meas' doc='Radio Measurement Processing' />
        <param name='ref' doc='Reference Counting' />
        <param name='gprs' doc='GPRS Packet Service' />
        <param name='ns' doc='GPRS Network Service (NS)' />
        <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
        <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
        <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
        <param name='slhc' doc='RFC1144 TCP/IP Header compression (SLHC)' />
        <param name='ranap' doc='RAN Application Part (RANAP)' />
        <param name='sua' doc='SCCP User Adaptation (SUA)' />
        <param name='v42bis' doc='V.42bis data compression (SNDCP)' />
        <param name='lglobal' doc='Library-internal global log family' />
        <param name='llapd' doc='LAPD in libosmogsm' />
        <param name='linp' doc='A-bis Intput Subsystem' />
        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
        <param name='lmi' doc='A-bis Input Driver for Signalling' />
        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
        <param name='lctrl' doc='Control Interface' />
        <param name='lgtp' doc='GPRS GTP library' />
        <param name='lstats' doc='Statistics messages and logging' />
        <param name='everything' doc='Don&apos;t use. It doesn&apos;t log anything' />
        <param name='debug' doc='Log debug messages and higher levels' />
        <param name='info' doc='Log informational messages and higher levels' />
        <param name='notice' doc='Log noticeable messages and higher levels' />
        <param name='error' doc='Log error messages and higher levels' />
        <param name='fatal' doc='Log only fatal messages' />
      </params>
    </command>
    <command id='logging filter nsvc (nsei|nsvci) &lt;0-65535&gt;'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='nsvc' doc='Filter based on NS Virtual Connection' />
        <param name='nsei' doc='Identify NS-VC by NSEI' />
        <param name='nsvci' doc='Identify NS-VC by NSVCI' />
        <param name='&lt;0-65535&gt;' doc='Numeric identifier' />
      </params>
    </command>
    <command id='logging filter bvc nsei &lt;0-65535&gt; bvci &lt;0-65535&gt;'>
      <params>
        <param name='logging' doc='Configure log message to this terminal' />
        <param name='filter' doc='Filter log messages' />
        <param name='bvc' doc='Filter based on BSSGP Virtual Connection' />
        <param name='nsei' doc='NSEI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='Network Service Entity Identifier (NSEI)' />
        <param name='bvci' doc='BVCI of the BVC to be filtered' />
        <param name='&lt;0-65535&gt;' doc='BSSGP Virtual Connection Identifier (BVCI)' />
      </params>
    </command>
  </node>
  <node id='8'>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='end'>
      <params>
        <param name='end' doc='End current mode and change to enable mode.' />
      </params>
    </command>
    <command id='local-ip ADDR'>
      <params>
        <param name='local-ip' doc='Set the IP address to which we bind locally' />
        <param name='ADDR' doc='IP Address' />
      </params>
    </command>
    <command id='no local-ip'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='local-ip' doc='Set the IP address to which we bind locally' />
      </params>
    </command>
    <command id='remote-ip ADDR'>
      <params>
        <param name='remote-ip' doc='Set the remote IP address to which we connect' />
        <param name='ADDR' doc='IP Address' />
      </params>
    </command>
    <command id='remote-port &lt;1-65535&gt;'>
      <params>
        <param name='remote-port' doc='Set the remote port to which we connect' />
        <param name='&lt;1-65535&gt;' doc='Remote port number' />
      </params>
    </command>
    <command id='mtu &lt;100-65535&gt;'>
      <params>
        <param name='mtu' doc='Set the maximum packet size' />
        <param name='&lt;100-65535&gt;' doc='Size in byte' />
      </params>
    </command>
    <command id='no mtu'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='mtu' doc='Set the maximum packet size' />
      </params>
    </command>
    <command id='prefix PREFIX'>
      <params>
        <param name='prefix' doc='Set the item name prefix' />
        <param name='PREFIX' doc='The prefix string' />
      </params>
    </command>
    <command id='no prefix'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='prefix' doc='Set the item name prefix' />
      </params>
    </command>
    <command id='level (global|peer|subscriber)'>
      <params>
        <param name='level' doc='Set the maximum group level' />
        <param name='global' doc='Report global groups only' />
        <param name='peer' doc='Report global and network peer related groups' />
        <param name='subscriber' doc='Report global, peer, and subscriber groups' />
      </params>
    </command>
    <command id='enable'>
      <params>
        <param name='enable' doc='Enable the reporter' />
      </params>
    </command>
    <command id='disable'>
      <params>
        <param name='disable' doc='Disable the reporter' />
      </params>
    </command>
  </node>
  <node id='9'>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='end'>
      <params>
        <param name='end' doc='End current mode and change to enable mode.' />
      </params>
    </command>
    <command id='login'>
      <params>
        <param name='login' doc='Enable password checking' />
      </params>
    </command>
    <command id='no login'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='login' doc='Enable password checking' />
      </params>
    </command>
    <command id='bind A.B.C.D'>
      <params>
        <param name='bind' doc='Accept VTY telnet connections on local interface' />
        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
      </params>
    </command>
  </node>
  <node id='12'>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='end'>
      <params>
        <param name='end' doc='End current mode and change to enable mode.' />
      </params>
    </command>
    <command id='nse &lt;0-65535&gt; nsvci &lt;0-65534&gt;'>
      <params>
        <param name='nse' doc='Persistent NS Entity' />
        <param name='&lt;0-65535&gt;' doc='NS Entity ID (NSEI)' />
        <param name='nsvci' doc='NS Virtual Connection' />
        <param name='&lt;0-65534&gt;' doc='NS Virtual Connection ID (NSVCI)' />
      </params>
    </command>
    <command id='nse &lt;0-65535&gt; remote-ip A.B.C.D'>
      <params>
        <param name='nse' doc='Persistent NS Entity' />
        <param name='&lt;0-65535&gt;' doc='NS Entity ID (NSEI)' />
        <param name='remote-ip' doc='Remote IP Address' />
        <param name='A.B.C.D' doc='Remote IP Address' />
      </params>
    </command>
    <command id='nse &lt;0-65535&gt; remote-port &lt;0-65535&gt;'>
      <params>
        <param name='nse' doc='Persistent NS Entity' />
        <param name='&lt;0-65535&gt;' doc='NS Entity ID (NSEI)' />
        <param name='remote-port' doc='Remote UDP Port' />
        <param name='&lt;0-65535&gt;' doc='Remote UDP Port Number' />
      </params>
    </command>
    <command id='nse &lt;0-65535&gt; fr-dlci &lt;16-1007&gt;'>
      <params>
        <param name='nse' doc='Persistent NS Entity' />
        <param name='&lt;0-65535&gt;' doc='NS Entity ID (NSEI)' />
        <param name='fr-dlci' doc='Frame Relay DLCI' />
        <param name='&lt;16-1007&gt;' doc='Frame Relay DLCI Number' />
      </params>
    </command>
    <command id='nse &lt;0-65535&gt; encapsulation (udp|framerelay-gre)'>
      <params>
        <param name='nse' doc='Persistent NS Entity' />
        <param name='&lt;0-65535&gt;' doc='NS Entity ID (NSEI)' />
        <param name='encapsulation' doc='Encapsulation for NS' />
        <param name='udp' doc='UDP/IP Encapsulation' />
        <param name='framerelay-gre' doc='Frame-Relay/GRE/IP Encapsulation' />
      </params>
    </command>
    <command id='nse &lt;0-65535&gt; remote-role (sgsn|bss)'>
      <params>
        <param name='nse' doc='Persistent NS Entity' />
        <param name='&lt;0-65535&gt;' doc='NS Entity ID (NSEI)' />
        <param name='remote-role' doc='Remote NSE Role' />
        <param name='sgsn' doc='Remote Peer is SGSN' />
        <param name='bss' doc='Remote Peer is BSS' />
      </params>
    </command>
    <command id='no nse &lt;0-65535&gt;'>
      <params>
        <param name='no' doc='Delete Persistent NS Entity' />
        <param name='nse' doc='Delete Persistent NS Entity' />
        <param name='&lt;0-65535&gt;' doc='NS Entity ID (NSEI)' />
      </params>
    </command>
    <command id='timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Network Service Timer' />
        <param name='tns-block' doc='(un)blocking Timer (Tns-block) timeout' />
        <param name='tns-block-retries' doc='(un)blocking Timer (Tns-block) number of retries' />
        <param name='tns-reset' doc='Reset Timer (Tns-reset) timeout' />
        <param name='tns-reset-retries' doc='Reset Timer (Tns-reset) number of retries' />
        <param name='tns-test' doc='Test Timer (Tns-test) timeout' />
        <param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' />
        <param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' />
        <param name='&lt;0-65535&gt;' doc='Timer Value' />
      </params>
    </command>
    <command id='encapsulation udp local-ip A.B.C.D'>
      <params>
        <param name='encapsulation' doc='NS encapsulation options' />
        <param name='udp' doc='NS over UDP Encapsulation' />
        <param name='local-ip' doc='Set the IP address on which we listen for NS/UDP' />
        <param name='A.B.C.D' doc='IP Address' />
      </params>
    </command>
    <command id='encapsulation udp local-port &lt;0-65535&gt;'>
      <params>
        <param name='encapsulation' doc='NS encapsulation options' />
        <param name='udp' doc='NS over UDP Encapsulation' />
        <param name='local-port' doc='Set the UDP port on which we listen for NS/UDP' />
        <param name='&lt;0-65535&gt;' doc='UDP port number' />
      </params>
    </command>
    <command id='encapsulation udp dscp &lt;0-255&gt;'>
      <params>
        <param name='encapsulation' doc='NS encapsulation options' />
        <param name='udp' doc='NS over UDP Encapsulation' />
        <param name='dscp' doc='Set DSCP/TOS on the UDP socket' />
        <param name='&lt;0-255&gt;' doc='DSCP Value' />
      </params>
    </command>
    <command id='encapsulation framerelay-gre enabled (1|0)'>
      <params>
        <param name='encapsulation' doc='NS encapsulation options' />
        <param name='framerelay-gre' doc='NS over Frame Relay over GRE Encapsulation' />
        <param name='enabled' doc='Enable or disable Frame Relay over GRE' />
        <param name='1' doc='Enable' />
        <param name='0' doc='Disable' />
      </params>
    </command>
    <command id='encapsulation framerelay-gre local-ip A.B.C.D'>
      <params>
        <param name='encapsulation' doc='NS encapsulation options' />
        <param name='framerelay-gre' doc='NS over Frame Relay over GRE Encapsulation' />
        <param name='local-ip' doc='Set the IP address on which we listen for NS/FR/GRE' />
        <param name='A.B.C.D' doc='IP Address' />
      </params>
    </command>
  </node>
  <node id='13'>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='end'>
      <params>
        <param name='end' doc='End current mode and change to enable mode.' />
      </params>
    </command>
  </node>
  <node id='14'>
    <command id='bind A.B.C.D'>
      <params>
        <param name='bind' doc='Set bind address to listen for Control connections' />
        <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
      </params>
    </command>
  </node>
  <node id='26'>
    <command id='help'>
      <params>
        <param name='help' doc='Description of the interactive help system' />
      </params>
    </command>
    <command id='list'>
      <params>
        <param name='list' doc='Print command list' />
      </params>
    </command>
    <command id='write terminal'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='terminal' doc='Write to terminal' />
      </params>
    </command>
    <command id='write file'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='file' doc='Write to configuration file' />
      </params>
    </command>
    <command id='write memory'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
        <param name='memory' doc='Write configuration to the file (same as write file)' />
      </params>
    </command>
    <command id='write'>
      <params>
        <param name='write' doc='Write running configuration to memory, network, or terminal' />
      </params>
    </command>
    <command id='show running-config'>
      <params>
        <param name='show' doc='Show running system information' />
        <param name='running-config' doc='running configuration' />
      </params>
    </command>
    <command id='exit'>
      <params>
        <param name='exit' doc='Exit current mode and down to previous mode' />
      </params>
    </command>
    <command id='end'>
      <params>
        <param name='end' doc='End current mode and change to enable mode.' />
      </params>
    </command>
    <command id='gtp local-ip A.B.C.D'>
      <params>
        <param name='gtp' doc='GTP Parameters' />
        <param name='local-ip' doc='Set the IP address for the local GTP bind' />
        <param name='A.B.C.D' doc='IPv4 Address' />
      </params>
    </command>
    <command id='ggsn &lt;0-255&gt; remote-ip A.B.C.D'>
      <params>
        <param name='ggsn' doc='Configure the GGSN information' />
        <param name='&lt;0-255&gt;' doc='GGSN Number' />
        <param name='remote-ip' doc='IP information' />
        <param name='A.B.C.D' doc='IPv4 Address' />
      </params>
    </command>
    <command id='ggsn &lt;0-255&gt; gtp-version (0|1)'>
      <params>
        <param name='ggsn' doc='Configure the GGSN information' />
        <param name='&lt;0-255&gt;' doc='GGSN Number' />
        <param name='gtp-version' doc='GTP Version' />
        <param name='0' doc='Version 0' />
        <param name='1' doc='Version 1' />
      </params>
    </command>
    <command id='imsi-acl (add|del) IMSI'>
      <params>
        <param name='imsi-acl' doc='Access Control List of foreign IMSIs' />
        <param name='add' doc='Add IMSI to ACL' />
        <param name='del' doc='Remove IMSI from ACL' />
        <param name='IMSI' doc='IMSI of subscriber' />
      </params>
    </command>
    <command id='auth-policy (accept-all|closed|acl-only|remote)'>
      <params>
        <param name='auth-policy' doc='Autorization Policy of SGSN' />
        <param name='accept-all' doc='Accept all IMSIs (DANGEROUS)' />
        <param name='closed' doc='Accept only home network subscribers or those in the ACL' />
        <param name='acl-only' doc='Accept only subscribers in the ACL' />
        <param name='remote' doc='Use remote subscription data only (HLR)' />
      </params>
    </command>
    <command id='encryption (GEA0|GEA1|GEA2|GEA3|GEA4)'>
      <params>
        <param name='encryption' doc='Set encryption algorithm for SGSN' />
        <param name='GEA0' doc='Use GEA0 (no encryption)' />
        <param name='GEA1' doc='Use GEA1' />
        <param name='GEA2' doc='Use GEA2' />
        <param name='GEA3' doc='Use GEA3' />
        <param name='GEA4' doc='Use GEA4' />
      </params>
    </command>
    <command id='gsup remote-ip A.B.C.D'>
      <params>
        <param name='gsup' doc='GSUP Parameters' />
        <param name='remote-ip' doc='Set the IP address of the remote GSUP server' />
        <param name='A.B.C.D' doc='IPv4 Address' />
      </params>
    </command>
    <command id='gsup remote-port &lt;0-65535&gt;'>
      <params>
        <param name='gsup' doc='GSUP Parameters' />
        <param name='remote-port' doc='Set the TCP port of the remote GSUP server' />
        <param name='&lt;0-65535&gt;' doc='Remote TCP port' />
      </params>
    </command>
    <command id='gsup oap-id &lt;0-65535&gt;'>
      <params>
        <param name='gsup' doc='GSUP Parameters' />
        <param name='oap-id' doc='Set the SGSN&apos;s OAP client ID' />
        <param name='&lt;0-65535&gt;' doc='OAP client ID (0 == disabled)' />
      </params>
    </command>
    <command id='gsup oap-k K'>
      <params>
        <param name='gsup' doc='GSUP Parameters' />
        <param name='oap-k' doc='Set the OAP shared secret K' />
        <param name='K' doc='K value (16 byte) hex' />
      </params>
    </command>
    <command id='gsup oap-opc OPC'>
      <params>
        <param name='gsup' doc='GSUP Parameters' />
        <param name='oap-opc' doc='Set the OAP shared secret OPC' />
        <param name='OPC' doc='OPC value (16 byte) hex' />
      </params>
    </command>
    <command id='apn APNAME ggsn &lt;0-255&gt;'>
      <params>
        <param name='apn' doc='Configure the information per APN' />
        <param name='APNAME' doc='The APN gateway name optionally prefixed by &apos;*&apos; (wildcard)' />
        <param name='ggsn' doc='Select the GGSN to use when the APN gateway prefix matches' />
        <param name='&lt;0-255&gt;' doc='The GGSN id' />
      </params>
    </command>
    <command id='apn APNAME imsi-prefix IMSIPRE ggsn &lt;0-255&gt;'>
      <params>
        <param name='apn' doc='Configure the information per APN' />
        <param name='APNAME' doc='The APN gateway name optionally prefixed by &apos;*&apos; (wildcard)' />
        <param name='imsi-prefix' doc='Restrict rule to a certain IMSI prefix' />
        <param name='IMSIPRE' doc='An IMSI prefix' />
        <param name='ggsn' doc='Select the GGSN to use when APN gateway and IMSI prefix match' />
        <param name='&lt;0-255&gt;' doc='The GGSN id' />
      </params>
    </command>
    <command id='access-point-name NAME'>
      <params>
        <param name='access-point-name' doc='Configure a global list of allowed APNs' />
        <param name='NAME' doc='Add this NAME to the list' />
      </params>
    </command>
    <command id='no access-point-name NAME'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='access-point-name' doc='Configure a global list of allowed APNs' />
        <param name='NAME' doc='Remove entry with NAME' />
      </params>
    </command>
    <command id='cdr filename NAME'>
      <params>
        <param name='cdr' doc='CDR' />
        <param name='filename' doc='Set filename' />
        <param name='NAME' doc='name' />
      </params>
    </command>
    <command id='no cdr filename'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='cdr' doc='CDR' />
        <param name='filename' doc='Disable CDR generation' />
      </params>
    </command>
    <command id='cdr interval &lt;1-2147483647&gt;'>
      <params>
        <param name='cdr' doc='CDR' />
        <param name='interval' doc='PDP periodic log interval' />
        <param name='&lt;1-2147483647&gt;' doc='Seconds' />
      </params>
    </command>
    <command id='ggsn dynamic'>
      <params>
        <param name='ggsn' doc='Configure the GGSN information' />
        <param name='dynamic' doc='Enable dynamic GRX based look-up (requires restart)' />
      </params>
    </command>
    <command id='grx-dns-add A.B.C.D'>
      <params>
        <param name='grx-dns-add' doc='Add DNS server' />
        <param name='A.B.C.D' doc='IPv4 address' />
      </params>
    </command>
    <command id='timer t3312 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3312' doc='Periodic RA Update timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3322 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3322' doc='Detach request -&gt; accept timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3350 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3350' doc='Waiting for ATT/RAU/TMSI_COMPL timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3360 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3360' doc='Waiting for AUTH/CIPH response timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3370 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3370' doc='Waiting for IDENTITY response timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3313 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3313' doc='Waiting for paging response timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3314 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3314' doc='Force to STANDBY on expiry timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3316 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3316' doc='AA-Ready timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3385 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3385' doc='Wait for ACT PDP CTX REQ timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3386 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3386' doc='Wait for MODIFY PDP CTX ACK timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3395 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3395' doc='Wait for DEACT PDP CTX ACK timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='timer t3397 &lt;0-65535&gt;'>
      <params>
        <param name='timer' doc='Configure GPRS Timers' />
        <param name='t3397' doc='Wait for DEACT AA PDP CTX ACK timer (s)' />
        <param name='&lt;0-65535&gt;' doc='Timer Value in seconds' />
      </params>
    </command>
    <command id='no compression rfc1144'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='compression' doc='Configure compression' />
        <param name='rfc1144' doc='disable rfc1144 TCP/IP header compression' />
      </params>
    </command>
    <command id='compression rfc1144 active slots &lt;1-256&gt;'>
      <params>
        <param name='compression' doc='Configure compression' />
        <param name='rfc1144' doc='RFC1144 Header compresion scheme' />
        <param name='active' doc='Compression is actively proposed' />
        <param name='slots' doc='Number of compression state slots' />
        <param name='&lt;1-256&gt;' doc='Number of compression state slots' />
      </params>
    </command>
    <command id='compression rfc1144 passive'>
      <params>
        <param name='compression' doc='Configure compression' />
        <param name='rfc1144' doc='RFC1144 Header compresion scheme' />
        <param name='passive' doc='Compression is available on request' />
      </params>
    </command>
    <command id='no compression v42bis'>
      <params>
        <param name='no' doc='Negate a command or set its defaults' />
        <param name='compression' doc='Configure compression' />
        <param name='v42bis' doc='disable V.42bis data compression' />
      </params>
    </command>
    <command id='compression v42bis active direction (ms|sgsn|both) codewords &lt;512-65535&gt; strlen &lt;6-250&gt;'>
      <params>
        <param name='compression' doc='Configure compression' />
        <param name='v42bis' doc='V.42bis data compresion scheme' />
        <param name='active' doc='Compression is actively proposed' />
        <param name='direction' doc='Direction in which the compression shall be active (p0)' />
        <param name='ms' doc='Compress ms-&gt;sgsn direction only' />
        <param name='sgsn' doc='Compress sgsn-&gt;ms direction only' />
        <param name='both' doc='Both directions' />
        <param name='codewords' doc='Number of codewords (p1)' />
        <param name='&lt;512-65535&gt;' doc='Number of codewords' />
        <param name='strlen' doc='Maximum string length (p2)' />
        <param name='&lt;6-250&gt;' doc='Maximum string length' />
      </params>
    </command>
    <command id='compression v42bis passive'>
      <params>
        <param name='compression' doc='Configure compression' />
        <param name='v42bis' doc='V.42bis data compresion scheme' />
        <param name='passive' doc='Compression is available on request' />
      </params>
    </command>
  </node>
</vtydoc>