<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> | |
<node id='0'> | |
</node> | |
<node id='1'> | |
<command id='show version'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='version' doc='Displays program version' /> | |
</params> | |
</command> | |
<command id='show online-help'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='online-help' doc='Online help' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='enable'> | |
<params> | |
<param name='enable' doc='Turn on privileged mode command' /> | |
</params> | |
</command> | |
<command id='terminal length <0-512>'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
<param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> | |
</params> | |
</command> | |
<command id='terminal no length'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
</params> | |
</command> | |
<command id='echo .MESSAGE'> | |
<params> | |
<param name='echo' doc='Echo a message back to the vty' /> | |
<param name='.MESSAGE' doc='The message to echo' /> | |
</params> | |
</command> | |
<command id='who'> | |
<params> | |
<param name='who' doc='Display who is on vty' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='logging enable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='enable' doc='Enables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging disable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='disable' doc='Disables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging print extended-timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='extended-timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> | |
</params> | |
</command> | |
<command id='logging print category (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='category' doc='Configure log message' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with category/subsystem name' /> | |
</params> | |
</command> | |
<command id='logging set-log-mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set-log-mask' doc='Set the logmask of this logging target' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging set log mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set' doc='Decide which categories to output.' /> | |
<param name='log' doc='Log commands' /> | |
<param name='mask' doc='Mask commands' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='mm' doc='Layer3 Mobility Management (MM)' /> | |
<param name='pag' doc='Paging Subsystem' /> | |
<param name='meas' doc='Radio Measurement Processing' /> | |
<param name='ref' doc='Reference Counting' /> | |
<param name='gprs' doc='GPRS Packet Service' /> | |
<param name='ns' doc='GPRS Network Service (NS)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> | |
<param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> | |
<param name='slhc' doc='RFC1144 TCP/IP Header compression (SLHC)' /> | |
<param name='ranap' doc='RAN Application Part (RANAP)' /> | |
<param name='sua' doc='SCCP User Adaptation (SUA)' /> | |
<param name='v42bis' doc='V.42bis data compression (SNDCP)' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='lctrl' doc='Control Interface' /> | |
<param name='lgtp' doc='GPRS GTP library' /> | |
<param name='lstats' doc='Statistics messages and logging' /> | |
<param name='everything' doc='Don't use. It doesn't log anything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticeable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
<command id='show logging vty'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='logging' doc='Show current logging configuration' /> | |
<param name='vty' doc='Show current logging configuration for this vty' /> | |
</params> | |
</command> | |
<command id='show alarms'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='alarms' doc='Show current logging configuration' /> | |
</params> | |
</command> | |
<command id='show stats'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='stats' doc='Show statistical values' /> | |
</params> | |
</command> | |
<command id='show stats level (global|peer|subscriber)'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='stats' doc='Show statistical values' /> | |
<param name='level' doc='Set the maximum group level' /> | |
<param name='global' doc='Show global groups only' /> | |
<param name='peer' doc='Show global and network peer related groups' /> | |
<param name='subscriber' doc='Show global, peer, and subscriber groups' /> | |
</params> | |
</command> | |
<command id='show asciidoc counters'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='asciidoc' doc='Asciidoc generation' /> | |
<param name='counters' doc='Generate table of all registered counters' /> | |
</params> | |
</command> | |
<command id='show sgsn'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='sgsn' doc='Display information about the SGSN' /> | |
</params> | |
</command> | |
<command id='show mm-context imsi IMSI [pdp]'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='mm-context' doc='MM Context' /> | |
<param name='imsi' doc='Identify by IMSI' /> | |
<param name='IMSI' doc='IMSI of the MM Context' /> | |
<param name='[pdp]' doc='Include PDP Context Information' /> | |
</params> | |
</command> | |
<command id='show mm-context all [pdp]'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='mm-context' doc='MM Context' /> | |
<param name='all' doc='All MM Contexts' /> | |
<param name='[pdp]' doc='Include PDP Context Information' /> | |
</params> | |
</command> | |
<command id='show pdp-context all'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='pdp-context' doc='Display information on PDP Context' /> | |
<param name='all' doc='Show everything' /> | |
</params> | |
</command> | |
<command id='show subscriber cache'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='subscriber' doc='Show information about subscribers' /> | |
<param name='cache' doc='Display contents of subscriber cache' /> | |
</params> | |
</command> | |
<command id='show ns'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='ns' doc='Display information about the NS protocol' /> | |
</params> | |
</command> | |
<command id='show ns stats'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='ns' doc='Display information about the NS protocol' /> | |
<param name='stats' doc='Include statistics' /> | |
</params> | |
</command> | |
<command id='show ns (nsei|nsvc) <0-65535> [stats]'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='ns' doc='Display information about the NS protocol' /> | |
<param name='nsei' doc='Select one NSE by its NSE Identifier' /> | |
<param name='nsvc' doc='Select one NSE by its NS-VC Identifier' /> | |
<param name='<0-65535>' doc='The Identifier of selected type' /> | |
<param name='[stats]' doc='Include Statistics' /> | |
</params> | |
</command> | |
<command id='logging filter nsvc (nsei|nsvci) <0-65535>'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='nsvc' doc='Filter based on NS Virtual Connection' /> | |
<param name='nsei' doc='Identify NS-VC by NSEI' /> | |
<param name='nsvci' doc='Identify NS-VC by NSVCI' /> | |
<param name='<0-65535>' doc='Numeric identifier' /> | |
</params> | |
</command> | |
<command id='show bssgp'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='bssgp' doc='Show information about the BSSGP protocol' /> | |
</params> | |
</command> | |
<command id='show bssgp stats'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='bssgp' doc='Show information about the BSSGP protocol' /> | |
<param name='stats' doc='Include statistics' /> | |
</params> | |
</command> | |
<command id='show bssgp nsei <0-65535> [stats]'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='bssgp' doc='Show information about the BSSGP protocol' /> | |
<param name='nsei' doc='Show all BVCs on one NSE' /> | |
<param name='<0-65535>' doc='The NSEI' /> | |
<param name='[stats]' doc='Include Statistics' /> | |
</params> | |
</command> | |
<command id='logging filter bvc nsei <0-65535> bvci <0-65535>'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='bvc' doc='Filter based on BSSGP Virtual Connection' /> | |
<param name='nsei' doc='NSEI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='Network Service Entity Identifier (NSEI)' /> | |
<param name='bvci' doc='BVCI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='BSSGP Virtual Connection Identifier (BVCI)' /> | |
</params> | |
</command> | |
<command id='bssgp bvc nsei <0-65535> bvci <0-65535> reset'> | |
<params> | |
<param name='bssgp' doc='Initiate BVC RESET procedure for a given NSEI and BVCI' /> | |
<param name='bvc' doc='Filter based on BSSGP Virtual Connection' /> | |
<param name='nsei' doc='NSEI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='Network Service Entity Identifier (NSEI)' /> | |
<param name='bvci' doc='BVCI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='BSSGP Virtual Connection Identifier (BVCI)' /> | |
<param name='reset' doc='Perform reset procedure' /> | |
</params> | |
</command> | |
<command id='show llc'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='llc' doc='Display information about the LLC protocol' /> | |
</params> | |
</command> | |
<command id='show sndcp'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='sndcp' doc='Display information about the SNDCP protocol' /> | |
</params> | |
</command> | |
</node> | |
<node id='2'> | |
</node> | |
<node id='3'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='disable'> | |
<params> | |
<param name='disable' doc='Turn off privileged mode command' /> | |
</params> | |
</command> | |
<command id='configure terminal'> | |
<params> | |
<param name='configure' doc='Configuration from vty interface' /> | |
<param name='terminal' doc='Configuration terminal' /> | |
</params> | |
</command> | |
<command id='copy running-config startup-config'> | |
<params> | |
<param name='copy' doc='Copy configuration' /> | |
<param name='running-config' doc='Copy running config to... ' /> | |
<param name='startup-config' doc='Copy running config to startup config (same as write file)' /> | |
</params> | |
</command> | |
<command id='show startup-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='startup-config' doc='Contentes of startup configuration' /> | |
</params> | |
</command> | |
<command id='show version'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='version' doc='Displays program version' /> | |
</params> | |
</command> | |
<command id='show online-help'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='online-help' doc='Online help' /> | |
</params> | |
</command> | |
<command id='terminal length <0-512>'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
<param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> | |
</params> | |
</command> | |
<command id='terminal no length'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
</params> | |
</command> | |
<command id='echo .MESSAGE'> | |
<params> | |
<param name='echo' doc='Echo a message back to the vty' /> | |
<param name='.MESSAGE' doc='The message to echo' /> | |
</params> | |
</command> | |
<command id='who'> | |
<params> | |
<param name='who' doc='Display who is on vty' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='terminal monitor'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='monitor' doc='Copy debug output to the current terminal line' /> | |
</params> | |
</command> | |
<command id='terminal no monitor'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='monitor' doc='Copy debug output to the current terminal line' /> | |
</params> | |
</command> | |
<command id='logging enable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='enable' doc='Enables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging disable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='disable' doc='Disables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging print extended-timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='extended-timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> | |
</params> | |
</command> | |
<command id='logging print category (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='category' doc='Configure log message' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with category/subsystem name' /> | |
</params> | |
</command> | |
<command id='logging set-log-mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set-log-mask' doc='Set the logmask of this logging target' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging set log mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set' doc='Decide which categories to output.' /> | |
<param name='log' doc='Log commands' /> | |
<param name='mask' doc='Mask commands' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='mm' doc='Layer3 Mobility Management (MM)' /> | |
<param name='pag' doc='Paging Subsystem' /> | |
<param name='meas' doc='Radio Measurement Processing' /> | |
<param name='ref' doc='Reference Counting' /> | |
<param name='gprs' doc='GPRS Packet Service' /> | |
<param name='ns' doc='GPRS Network Service (NS)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> | |
<param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> | |
<param name='slhc' doc='RFC1144 TCP/IP Header compression (SLHC)' /> | |
<param name='ranap' doc='RAN Application Part (RANAP)' /> | |
<param name='sua' doc='SCCP User Adaptation (SUA)' /> | |
<param name='v42bis' doc='V.42bis data compression (SNDCP)' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='lctrl' doc='Control Interface' /> | |
<param name='lgtp' doc='GPRS GTP library' /> | |
<param name='lstats' doc='Statistics messages and logging' /> | |
<param name='everything' doc='Don't use. It doesn't log anything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticeable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
<command id='show logging vty'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='logging' doc='Show current logging configuration' /> | |
<param name='vty' doc='Show current logging configuration for this vty' /> | |
</params> | |
</command> | |
<command id='show alarms'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='alarms' doc='Show current logging configuration' /> | |
</params> | |
</command> | |
<command id='show stats'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='stats' doc='Show statistical values' /> | |
</params> | |
</command> | |
<command id='show stats level (global|peer|subscriber)'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='stats' doc='Show statistical values' /> | |
<param name='level' doc='Set the maximum group level' /> | |
<param name='global' doc='Show global groups only' /> | |
<param name='peer' doc='Show global and network peer related groups' /> | |
<param name='subscriber' doc='Show global, peer, and subscriber groups' /> | |
</params> | |
</command> | |
<command id='show asciidoc counters'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='asciidoc' doc='Asciidoc generation' /> | |
<param name='counters' doc='Generate table of all registered counters' /> | |
</params> | |
</command> | |
<command id='show sgsn'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='sgsn' doc='Display information about the SGSN' /> | |
</params> | |
</command> | |
<command id='show mm-context imsi IMSI [pdp]'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='mm-context' doc='MM Context' /> | |
<param name='imsi' doc='Identify by IMSI' /> | |
<param name='IMSI' doc='IMSI of the MM Context' /> | |
<param name='[pdp]' doc='Include PDP Context Information' /> | |
</params> | |
</command> | |
<command id='show mm-context all [pdp]'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='mm-context' doc='MM Context' /> | |
<param name='all' doc='All MM Contexts' /> | |
<param name='[pdp]' doc='Include PDP Context Information' /> | |
</params> | |
</command> | |
<command id='show pdp-context all'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='pdp-context' doc='Display information on PDP Context' /> | |
<param name='all' doc='Show everything' /> | |
</params> | |
</command> | |
<command id='show subscriber cache'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='subscriber' doc='Show information about subscribers' /> | |
<param name='cache' doc='Display contents of subscriber cache' /> | |
</params> | |
</command> | |
<command id='update-subscriber imsi IMSI insert auth-triplet <1-5> sres SRES rand RAND kc KC'> | |
<params> | |
<param name='update-subscriber' doc='Update subscriber list' /> | |
<param name='imsi' doc='Use the IMSI to select the subscriber' /> | |
<param name='IMSI' doc='The IMSI' /> | |
<param name='insert' doc='Insert data into the subscriber record' /> | |
<param name='auth-triplet' doc='Update authentication triplet' /> | |
<param name='<1-5>' doc='Triplet index' /> | |
<param name='sres' doc='Set SRES value' /> | |
<param name='SRES' doc='SRES value (4 byte) in hex' /> | |
<param name='rand' doc='Set RAND value' /> | |
<param name='RAND' doc='RAND value (16 byte) in hex' /> | |
<param name='kc' doc='Set Kc value' /> | |
<param name='KC' doc='Kc value (8 byte) in hex' /> | |
</params> | |
</command> | |
<command id='update-subscriber imsi IMSI create'> | |
<params> | |
<param name='update-subscriber' doc='Update subscriber list' /> | |
<param name='imsi' doc='Use the IMSI to select the subscriber' /> | |
<param name='IMSI' doc='The IMSI' /> | |
<param name='create' doc='Create a subscriber entry' /> | |
</params> | |
</command> | |
<command id='update-subscriber imsi IMSI destroy'> | |
<params> | |
<param name='update-subscriber' doc='Update subscriber list' /> | |
<param name='imsi' doc='Use the IMSI to select the subscriber' /> | |
<param name='IMSI' doc='The IMSI' /> | |
<param name='destroy' doc='Destroy a subscriber entry' /> | |
</params> | |
</command> | |
<command id='update-subscriber imsi IMSI cancel (update-procedure|subscription-withdraw)'> | |
<params> | |
<param name='update-subscriber' doc='Update subscriber list' /> | |
<param name='imsi' doc='Use the IMSI to select the subscriber' /> | |
<param name='IMSI' doc='The IMSI' /> | |
<param name='cancel' doc='Cancel (remove) subscriber record' /> | |
<param name='update-procedure' doc='The MS moved to another SGSN' /> | |
<param name='subscription-withdraw' doc='The subscription is no longer valid' /> | |
</params> | |
</command> | |
<command id='update-subscriber imsi IMSI update-location-result (ok|system-failure|data-missing|unexpected-data-value|unknown-subscriber|roaming-not-allowed)'> | |
<params> | |
<param name='update-subscriber' doc='Update subscriber list' /> | |
<param name='imsi' doc='Use the IMSI to select the subscriber' /> | |
<param name='IMSI' doc='The IMSI' /> | |
<param name='update-location-result' doc='Complete the update location procedure' /> | |
<param name='ok' doc='The update location request succeeded' /> | |
<param name='system-failure' doc='Force error code SystemFailure' /> | |
<param name='data-missing' doc='Force error code DataMissing' /> | |
<param name='unexpected-data-value' doc='Force error code UnexpectedDataValue' /> | |
<param name='unknown-subscriber' doc='Force error code UnknownSubscriber' /> | |
<param name='roaming-not-allowed' doc='Force error code RoamingNotAllowed' /> | |
</params> | |
</command> | |
<command id='update-subscriber imsi IMSI update-auth-info'> | |
<params> | |
<param name='update-subscriber' doc='Update subscriber list' /> | |
<param name='imsi' doc='Use the IMSI to select the subscriber' /> | |
<param name='IMSI' doc='The IMSI' /> | |
<param name='update-auth-info' doc='Complete the send authentication info procedure' /> | |
</params> | |
</command> | |
<command id='show ns'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='ns' doc='Display information about the NS protocol' /> | |
</params> | |
</command> | |
<command id='show ns stats'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='ns' doc='Display information about the NS protocol' /> | |
<param name='stats' doc='Include statistics' /> | |
</params> | |
</command> | |
<command id='show ns (nsei|nsvc) <0-65535> [stats]'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='ns' doc='Display information about the NS protocol' /> | |
<param name='nsei' doc='Select one NSE by its NSE Identifier' /> | |
<param name='nsvc' doc='Select one NSE by its NS-VC Identifier' /> | |
<param name='<0-65535>' doc='The Identifier of selected type' /> | |
<param name='[stats]' doc='Include Statistics' /> | |
</params> | |
</command> | |
<command id='logging filter nsvc (nsei|nsvci) <0-65535>'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='nsvc' doc='Filter based on NS Virtual Connection' /> | |
<param name='nsei' doc='Identify NS-VC by NSEI' /> | |
<param name='nsvci' doc='Identify NS-VC by NSVCI' /> | |
<param name='<0-65535>' doc='Numeric identifier' /> | |
</params> | |
</command> | |
<command id='nsvc (nsei|nsvci) <0-65535> (block|unblock|reset)'> | |
<params> | |
<param name='nsvc' doc='Perform an operation on a NSVC' /> | |
<param name='nsei' doc='NSEI to identify NS-VC Identifier (NS-VCI)' /> | |
<param name='nsvci' doc='NS-VC Identifier (NS-VCI)' /> | |
<param name='<0-65535>' doc='The NSEI' /> | |
<param name='block' doc='Initiate BLOCK procedure' /> | |
<param name='unblock' doc='Initiate UNBLOCK procedure' /> | |
<param name='reset' doc='Initiate RESET procedure' /> | |
</params> | |
</command> | |
<command id='show bssgp'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='bssgp' doc='Show information about the BSSGP protocol' /> | |
</params> | |
</command> | |
<command id='show bssgp stats'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='bssgp' doc='Show information about the BSSGP protocol' /> | |
<param name='stats' doc='Include statistics' /> | |
</params> | |
</command> | |
<command id='show bssgp nsei <0-65535> [stats]'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='bssgp' doc='Show information about the BSSGP protocol' /> | |
<param name='nsei' doc='Show all BVCs on one NSE' /> | |
<param name='<0-65535>' doc='The NSEI' /> | |
<param name='[stats]' doc='Include Statistics' /> | |
</params> | |
</command> | |
<command id='logging filter bvc nsei <0-65535> bvci <0-65535>'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='bvc' doc='Filter based on BSSGP Virtual Connection' /> | |
<param name='nsei' doc='NSEI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='Network Service Entity Identifier (NSEI)' /> | |
<param name='bvci' doc='BVCI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='BSSGP Virtual Connection Identifier (BVCI)' /> | |
</params> | |
</command> | |
<command id='bssgp bvc nsei <0-65535> bvci <0-65535> reset'> | |
<params> | |
<param name='bssgp' doc='Initiate BVC RESET procedure for a given NSEI and BVCI' /> | |
<param name='bvc' doc='Filter based on BSSGP Virtual Connection' /> | |
<param name='nsei' doc='NSEI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='Network Service Entity Identifier (NSEI)' /> | |
<param name='bvci' doc='BVCI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='BSSGP Virtual Connection Identifier (BVCI)' /> | |
<param name='reset' doc='Perform reset procedure' /> | |
</params> | |
</command> | |
<command id='show llc'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='llc' doc='Display information about the LLC protocol' /> | |
</params> | |
</command> | |
<command id='show sndcp'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='sndcp' doc='Display information about the SNDCP protocol' /> | |
</params> | |
</command> | |
</node> | |
<node id='4'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='hostname WORD'> | |
<params> | |
<param name='hostname' doc='Set system's network name' /> | |
<param name='WORD' doc='This system's network name' /> | |
</params> | |
</command> | |
<command id='no hostname [HOSTNAME]'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='hostname' doc='Reset system's network name' /> | |
<param name='[HOSTNAME]' doc='Host name of this router' /> | |
</params> | |
</command> | |
<command id='password (8|) WORD'> | |
<params> | |
<param name='password' doc='Assign the terminal connection password' /> | |
<param name='8' doc='Specifies a HIDDEN password will follow' /> | |
<param name='' doc='dummy string ' /> | |
<param name='WORD' doc='The HIDDEN line password string' /> | |
</params> | |
</command> | |
<command id='password LINE'> | |
<params> | |
<param name='password' doc='Assign the terminal connection password' /> | |
<param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> | |
</params> | |
</command> | |
<command id='enable password (8|) WORD'> | |
<params> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
<param name='8' doc='Specifies a HIDDEN password will follow' /> | |
<param name='' doc='dummy string ' /> | |
<param name='WORD' doc='The HIDDEN 'enable' password string' /> | |
</params> | |
</command> | |
<command id='enable password LINE'> | |
<params> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
<param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> | |
</params> | |
</command> | |
<command id='no enable password'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
</params> | |
</command> | |
<command id='banner motd default'> | |
<params> | |
<param name='banner' doc='Set banner string' /> | |
<param name='motd' doc='Strings for motd' /> | |
<param name='default' doc='Default string' /> | |
</params> | |
</command> | |
<command id='banner motd file [FILE]'> | |
<params> | |
<param name='banner' doc='Set banner' /> | |
<param name='motd' doc='Banner for motd' /> | |
<param name='file' doc='Banner from a file' /> | |
<param name='[FILE]' doc='Filename' /> | |
</params> | |
</command> | |
<command id='no banner motd'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='banner' doc='Set banner string' /> | |
<param name='motd' doc='Strings for motd' /> | |
</params> | |
</command> | |
<command id='service terminal-length <0-512>'> | |
<params> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='terminal-length' doc='System wide terminal length configuration' /> | |
<param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> | |
</params> | |
</command> | |
<command id='no service terminal-length [<0-512>]'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='terminal-length' doc='System wide terminal length configuration' /> | |
<param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> | |
</params> | |
</command> | |
<command id='line vty'> | |
<params> | |
<param name='line' doc='Configure a terminal line' /> | |
<param name='vty' doc='Virtual terminal' /> | |
</params> | |
</command> | |
<command id='service advanced-vty'> | |
<params> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='advanced-vty' doc='Enable advanced mode vty interface' /> | |
</params> | |
</command> | |
<command id='no service advanced-vty'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='advanced-vty' doc='Enable advanced mode vty interface' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='log stderr'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='stderr' doc='Logging via STDERR of the process' /> | |
</params> | |
</command> | |
<command id='no log stderr'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='stderr' doc='Logging via STDERR of the process' /> | |
</params> | |
</command> | |
<command id='log file .FILENAME'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='file' doc='Logging to text file' /> | |
<param name='.FILENAME' doc='Filename' /> | |
</params> | |
</command> | |
<command id='no log file .FILENAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='file' doc='Logging to text file' /> | |
<param name='.FILENAME' doc='Filename' /> | |
</params> | |
</command> | |
<command id='log alarms <2-32700>'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='alarms' doc='Logging alarms to osmo_strrb' /> | |
<param name='<2-32700>' doc='Maximum number of messages to log' /> | |
</params> | |
</command> | |
<command id='no log alarms'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='alarms' doc='Logging alarms to osmo_strrb' /> | |
</params> | |
</command> | |
<command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
<param name='authpriv' doc='Security/authorization messages facility' /> | |
<param name='cron' doc='Clock daemon (cron/at) facility' /> | |
<param name='daemon' doc='General system daemon facility' /> | |
<param name='ftp' doc='Ftp daemon facility' /> | |
<param name='lpr' doc='Line printer facility' /> | |
<param name='mail' doc='Mail facility' /> | |
<param name='news' doc='News facility' /> | |
<param name='user' doc='Generic facility' /> | |
<param name='uucp' doc='UUCP facility' /> | |
</params> | |
</command> | |
<command id='log syslog local <0-7>'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
<param name='local' doc='Syslog LOCAL facility' /> | |
<param name='<0-7>' doc='Local facility number' /> | |
</params> | |
</command> | |
<command id='no log syslog'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
</params> | |
</command> | |
<command id='log gsmtap [HOSTNAME]'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='gsmtap' doc='Logging via GSMTAP' /> | |
<param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> | |
</params> | |
</command> | |
<command id='stats reporter statsd'> | |
<params> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='reporter' doc='Configure a stats reporter' /> | |
<param name='statsd' doc='Report to a STATSD server' /> | |
</params> | |
</command> | |
<command id='no stats reporter statsd'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='reporter' doc='Configure a stats reporter' /> | |
<param name='statsd' doc='Report to a STATSD server' /> | |
</params> | |
</command> | |
<command id='stats reporter log'> | |
<params> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='reporter' doc='Configure a stats reporter' /> | |
<param name='log' doc='Report to the logger' /> | |
</params> | |
</command> | |
<command id='no stats reporter log'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='reporter' doc='Configure a stats reporter' /> | |
<param name='log' doc='Report to the logger' /> | |
</params> | |
</command> | |
<command id='stats interval <1-65535>'> | |
<params> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='interval' doc='Set the reporting interval' /> | |
<param name='<1-65535>' doc='Interval in seconds' /> | |
</params> | |
</command> | |
<command id='sgsn'> | |
<params> | |
<param name='sgsn' doc='Configure the SGSN' /> | |
</params> | |
</command> | |
<command id='ctrl'> | |
<params> | |
<param name='ctrl' doc='Configure the Control Interface' /> | |
</params> | |
</command> | |
<command id='ns'> | |
<params> | |
<param name='ns' doc='Configure the GPRS Network Service' /> | |
</params> | |
</command> | |
<command id='bssgp'> | |
<params> | |
<param name='bssgp' doc='Configure the GPRS BSS Gateway Protocol' /> | |
</params> | |
</command> | |
</node> | |
<node id='7'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging print extended-timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='extended-timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> | |
</params> | |
</command> | |
<command id='logging print category (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='category' doc='Configure log message' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with category/subsystem name' /> | |
</params> | |
</command> | |
<command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|slhc|ranap|sua|v42bis|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='mm' doc='Layer3 Mobility Management (MM)' /> | |
<param name='pag' doc='Paging Subsystem' /> | |
<param name='meas' doc='Radio Measurement Processing' /> | |
<param name='ref' doc='Reference Counting' /> | |
<param name='gprs' doc='GPRS Packet Service' /> | |
<param name='ns' doc='GPRS Network Service (NS)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> | |
<param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> | |
<param name='slhc' doc='RFC1144 TCP/IP Header compression (SLHC)' /> | |
<param name='ranap' doc='RAN Application Part (RANAP)' /> | |
<param name='sua' doc='SCCP User Adaptation (SUA)' /> | |
<param name='v42bis' doc='V.42bis data compression (SNDCP)' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='lctrl' doc='Control Interface' /> | |
<param name='lgtp' doc='GPRS GTP library' /> | |
<param name='lstats' doc='Statistics messages and logging' /> | |
<param name='everything' doc='Don't use. It doesn't log anything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticeable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
<command id='logging filter nsvc (nsei|nsvci) <0-65535>'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='nsvc' doc='Filter based on NS Virtual Connection' /> | |
<param name='nsei' doc='Identify NS-VC by NSEI' /> | |
<param name='nsvci' doc='Identify NS-VC by NSVCI' /> | |
<param name='<0-65535>' doc='Numeric identifier' /> | |
</params> | |
</command> | |
<command id='logging filter bvc nsei <0-65535> bvci <0-65535>'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='bvc' doc='Filter based on BSSGP Virtual Connection' /> | |
<param name='nsei' doc='NSEI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='Network Service Entity Identifier (NSEI)' /> | |
<param name='bvci' doc='BVCI of the BVC to be filtered' /> | |
<param name='<0-65535>' doc='BSSGP Virtual Connection Identifier (BVCI)' /> | |
</params> | |
</command> | |
</node> | |
<node id='8'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='local-ip ADDR'> | |
<params> | |
<param name='local-ip' doc='Set the IP address to which we bind locally' /> | |
<param name='ADDR' doc='IP Address' /> | |
</params> | |
</command> | |
<command id='no local-ip'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='local-ip' doc='Set the IP address to which we bind locally' /> | |
</params> | |
</command> | |
<command id='remote-ip ADDR'> | |
<params> | |
<param name='remote-ip' doc='Set the remote IP address to which we connect' /> | |
<param name='ADDR' doc='IP Address' /> | |
</params> | |
</command> | |
<command id='remote-port <1-65535>'> | |
<params> | |
<param name='remote-port' doc='Set the remote port to which we connect' /> | |
<param name='<1-65535>' doc='Remote port number' /> | |
</params> | |
</command> | |
<command id='mtu <100-65535>'> | |
<params> | |
<param name='mtu' doc='Set the maximum packet size' /> | |
<param name='<100-65535>' doc='Size in byte' /> | |
</params> | |
</command> | |
<command id='no mtu'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='mtu' doc='Set the maximum packet size' /> | |
</params> | |
</command> | |
<command id='prefix PREFIX'> | |
<params> | |
<param name='prefix' doc='Set the item name prefix' /> | |
<param name='PREFIX' doc='The prefix string' /> | |
</params> | |
</command> | |
<command id='no prefix'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='prefix' doc='Set the item name prefix' /> | |
</params> | |
</command> | |
<command id='level (global|peer|subscriber)'> | |
<params> | |
<param name='level' doc='Set the maximum group level' /> | |
<param name='global' doc='Report global groups only' /> | |
<param name='peer' doc='Report global and network peer related groups' /> | |
<param name='subscriber' doc='Report global, peer, and subscriber groups' /> | |
</params> | |
</command> | |
<command id='enable'> | |
<params> | |
<param name='enable' doc='Enable the reporter' /> | |
</params> | |
</command> | |
<command id='disable'> | |
<params> | |
<param name='disable' doc='Disable the reporter' /> | |
</params> | |
</command> | |
</node> | |
<node id='9'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='login'> | |
<params> | |
<param name='login' doc='Enable password checking' /> | |
</params> | |
</command> | |
<command id='no login'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='login' doc='Enable password checking' /> | |
</params> | |
</command> | |
<command id='bind A.B.C.D'> | |
<params> | |
<param name='bind' doc='Accept VTY telnet connections on local interface' /> | |
<param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> | |
</params> | |
</command> | |
</node> | |
<node id='12'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='nse <0-65535> nsvci <0-65534>'> | |
<params> | |
<param name='nse' doc='Persistent NS Entity' /> | |
<param name='<0-65535>' doc='NS Entity ID (NSEI)' /> | |
<param name='nsvci' doc='NS Virtual Connection' /> | |
<param name='<0-65534>' doc='NS Virtual Connection ID (NSVCI)' /> | |
</params> | |
</command> | |
<command id='nse <0-65535> remote-ip A.B.C.D'> | |
<params> | |
<param name='nse' doc='Persistent NS Entity' /> | |
<param name='<0-65535>' doc='NS Entity ID (NSEI)' /> | |
<param name='remote-ip' doc='Remote IP Address' /> | |
<param name='A.B.C.D' doc='Remote IP Address' /> | |
</params> | |
</command> | |
<command id='nse <0-65535> remote-port <0-65535>'> | |
<params> | |
<param name='nse' doc='Persistent NS Entity' /> | |
<param name='<0-65535>' doc='NS Entity ID (NSEI)' /> | |
<param name='remote-port' doc='Remote UDP Port' /> | |
<param name='<0-65535>' doc='Remote UDP Port Number' /> | |
</params> | |
</command> | |
<command id='nse <0-65535> fr-dlci <16-1007>'> | |
<params> | |
<param name='nse' doc='Persistent NS Entity' /> | |
<param name='<0-65535>' doc='NS Entity ID (NSEI)' /> | |
<param name='fr-dlci' doc='Frame Relay DLCI' /> | |
<param name='<16-1007>' doc='Frame Relay DLCI Number' /> | |
</params> | |
</command> | |
<command id='nse <0-65535> encapsulation (udp|framerelay-gre)'> | |
<params> | |
<param name='nse' doc='Persistent NS Entity' /> | |
<param name='<0-65535>' doc='NS Entity ID (NSEI)' /> | |
<param name='encapsulation' doc='Encapsulation for NS' /> | |
<param name='udp' doc='UDP/IP Encapsulation' /> | |
<param name='framerelay-gre' doc='Frame-Relay/GRE/IP Encapsulation' /> | |
</params> | |
</command> | |
<command id='nse <0-65535> remote-role (sgsn|bss)'> | |
<params> | |
<param name='nse' doc='Persistent NS Entity' /> | |
<param name='<0-65535>' doc='NS Entity ID (NSEI)' /> | |
<param name='remote-role' doc='Remote NSE Role' /> | |
<param name='sgsn' doc='Remote Peer is SGSN' /> | |
<param name='bss' doc='Remote Peer is BSS' /> | |
</params> | |
</command> | |
<command id='no nse <0-65535>'> | |
<params> | |
<param name='no' doc='Delete Persistent NS Entity' /> | |
<param name='nse' doc='Delete Persistent NS Entity' /> | |
<param name='<0-65535>' doc='NS Entity ID (NSEI)' /> | |
</params> | |
</command> | |
<command id='timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) <0-65535>'> | |
<params> | |
<param name='timer' doc='Network Service Timer' /> | |
<param name='tns-block' doc='(un)blocking Timer (Tns-block) timeout' /> | |
<param name='tns-block-retries' doc='(un)blocking Timer (Tns-block) number of retries' /> | |
<param name='tns-reset' doc='Reset Timer (Tns-reset) timeout' /> | |
<param name='tns-reset-retries' doc='Reset Timer (Tns-reset) number of retries' /> | |
<param name='tns-test' doc='Test Timer (Tns-test) timeout' /> | |
<param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' /> | |
<param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' /> | |
<param name='<0-65535>' doc='Timer Value' /> | |
</params> | |
</command> | |
<command id='encapsulation udp local-ip A.B.C.D'> | |
<params> | |
<param name='encapsulation' doc='NS encapsulation options' /> | |
<param name='udp' doc='NS over UDP Encapsulation' /> | |
<param name='local-ip' doc='Set the IP address on which we listen for NS/UDP' /> | |
<param name='A.B.C.D' doc='IP Address' /> | |
</params> | |
</command> | |
<command id='encapsulation udp local-port <0-65535>'> | |
<params> | |
<param name='encapsulation' doc='NS encapsulation options' /> | |
<param name='udp' doc='NS over UDP Encapsulation' /> | |
<param name='local-port' doc='Set the UDP port on which we listen for NS/UDP' /> | |
<param name='<0-65535>' doc='UDP port number' /> | |
</params> | |
</command> | |
<command id='encapsulation udp dscp <0-255>'> | |
<params> | |
<param name='encapsulation' doc='NS encapsulation options' /> | |
<param name='udp' doc='NS over UDP Encapsulation' /> | |
<param name='dscp' doc='Set DSCP/TOS on the UDP socket' /> | |
<param name='<0-255>' doc='DSCP Value' /> | |
</params> | |
</command> | |
<command id='encapsulation framerelay-gre enabled (1|0)'> | |
<params> | |
<param name='encapsulation' doc='NS encapsulation options' /> | |
<param name='framerelay-gre' doc='NS over Frame Relay over GRE Encapsulation' /> | |
<param name='enabled' doc='Enable or disable Frame Relay over GRE' /> | |
<param name='1' doc='Enable' /> | |
<param name='0' doc='Disable' /> | |
</params> | |
</command> | |
<command id='encapsulation framerelay-gre local-ip A.B.C.D'> | |
<params> | |
<param name='encapsulation' doc='NS encapsulation options' /> | |
<param name='framerelay-gre' doc='NS over Frame Relay over GRE Encapsulation' /> | |
<param name='local-ip' doc='Set the IP address on which we listen for NS/FR/GRE' /> | |
<param name='A.B.C.D' doc='IP Address' /> | |
</params> | |
</command> | |
</node> | |
<node id='13'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
</node> | |
<node id='14'> | |
<command id='bind A.B.C.D'> | |
<params> | |
<param name='bind' doc='Set bind address to listen for Control connections' /> | |
<param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' /> | |
</params> | |
</command> | |
</node> | |
<node id='26'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='gtp local-ip A.B.C.D'> | |
<params> | |
<param name='gtp' doc='GTP Parameters' /> | |
<param name='local-ip' doc='Set the IP address for the local GTP bind' /> | |
<param name='A.B.C.D' doc='IPv4 Address' /> | |
</params> | |
</command> | |
<command id='ggsn <0-255> remote-ip A.B.C.D'> | |
<params> | |
<param name='ggsn' doc='Configure the GGSN information' /> | |
<param name='<0-255>' doc='GGSN Number' /> | |
<param name='remote-ip' doc='IP information' /> | |
<param name='A.B.C.D' doc='IPv4 Address' /> | |
</params> | |
</command> | |
<command id='ggsn <0-255> gtp-version (0|1)'> | |
<params> | |
<param name='ggsn' doc='Configure the GGSN information' /> | |
<param name='<0-255>' doc='GGSN Number' /> | |
<param name='gtp-version' doc='GTP Version' /> | |
<param name='0' doc='Version 0' /> | |
<param name='1' doc='Version 1' /> | |
</params> | |
</command> | |
<command id='imsi-acl (add|del) IMSI'> | |
<params> | |
<param name='imsi-acl' doc='Access Control List of foreign IMSIs' /> | |
<param name='add' doc='Add IMSI to ACL' /> | |
<param name='del' doc='Remove IMSI from ACL' /> | |
<param name='IMSI' doc='IMSI of subscriber' /> | |
</params> | |
</command> | |
<command id='auth-policy (accept-all|closed|acl-only|remote)'> | |
<params> | |
<param name='auth-policy' doc='Autorization Policy of SGSN' /> | |
<param name='accept-all' doc='Accept all IMSIs (DANGEROUS)' /> | |
<param name='closed' doc='Accept only home network subscribers or those in the ACL' /> | |
<param name='acl-only' doc='Accept only subscribers in the ACL' /> | |
<param name='remote' doc='Use remote subscription data only (HLR)' /> | |
</params> | |
</command> | |
<command id='encryption (GEA0|GEA1|GEA2|GEA3|GEA4)'> | |
<params> | |
<param name='encryption' doc='Set encryption algorithm for SGSN' /> | |
<param name='GEA0' doc='Use GEA0 (no encryption)' /> | |
<param name='GEA1' doc='Use GEA1' /> | |
<param name='GEA2' doc='Use GEA2' /> | |
<param name='GEA3' doc='Use GEA3' /> | |
<param name='GEA4' doc='Use GEA4' /> | |
</params> | |
</command> | |
<command id='gsup remote-ip A.B.C.D'> | |
<params> | |
<param name='gsup' doc='GSUP Parameters' /> | |
<param name='remote-ip' doc='Set the IP address of the remote GSUP server' /> | |
<param name='A.B.C.D' doc='IPv4 Address' /> | |
</params> | |
</command> | |
<command id='gsup remote-port <0-65535>'> | |
<params> | |
<param name='gsup' doc='GSUP Parameters' /> | |
<param name='remote-port' doc='Set the TCP port of the remote GSUP server' /> | |
<param name='<0-65535>' doc='Remote TCP port' /> | |
</params> | |
</command> | |
<command id='gsup oap-id <0-65535>'> | |
<params> | |
<param name='gsup' doc='GSUP Parameters' /> | |
<param name='oap-id' doc='Set the SGSN's OAP client ID' /> | |
<param name='<0-65535>' doc='OAP client ID (0 == disabled)' /> | |
</params> | |
</command> | |
<command id='gsup oap-k K'> | |
<params> | |
<param name='gsup' doc='GSUP Parameters' /> | |
<param name='oap-k' doc='Set the OAP shared secret K' /> | |
<param name='K' doc='K value (16 byte) hex' /> | |
</params> | |
</command> | |
<command id='gsup oap-opc OPC'> | |
<params> | |
<param name='gsup' doc='GSUP Parameters' /> | |
<param name='oap-opc' doc='Set the OAP shared secret OPC' /> | |
<param name='OPC' doc='OPC value (16 byte) hex' /> | |
</params> | |
</command> | |
<command id='apn APNAME ggsn <0-255>'> | |
<params> | |
<param name='apn' doc='Configure the information per APN' /> | |
<param name='APNAME' doc='The APN gateway name optionally prefixed by '*' (wildcard)' /> | |
<param name='ggsn' doc='Select the GGSN to use when the APN gateway prefix matches' /> | |
<param name='<0-255>' doc='The GGSN id' /> | |
</params> | |
</command> | |
<command id='apn APNAME imsi-prefix IMSIPRE ggsn <0-255>'> | |
<params> | |
<param name='apn' doc='Configure the information per APN' /> | |
<param name='APNAME' doc='The APN gateway name optionally prefixed by '*' (wildcard)' /> | |
<param name='imsi-prefix' doc='Restrict rule to a certain IMSI prefix' /> | |
<param name='IMSIPRE' doc='An IMSI prefix' /> | |
<param name='ggsn' doc='Select the GGSN to use when APN gateway and IMSI prefix match' /> | |
<param name='<0-255>' doc='The GGSN id' /> | |
</params> | |
</command> | |
<command id='access-point-name NAME'> | |
<params> | |
<param name='access-point-name' doc='Configure a global list of allowed APNs' /> | |
<param name='NAME' doc='Add this NAME to the list' /> | |
</params> | |
</command> | |
<command id='no access-point-name NAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='access-point-name' doc='Configure a global list of allowed APNs' /> | |
<param name='NAME' doc='Remove entry with NAME' /> | |
</params> | |
</command> | |
<command id='cdr filename NAME'> | |
<params> | |
<param name='cdr' doc='CDR' /> | |
<param name='filename' doc='Set filename' /> | |
<param name='NAME' doc='name' /> | |
</params> | |
</command> | |
<command id='no cdr filename'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='cdr' doc='CDR' /> | |
<param name='filename' doc='Disable CDR generation' /> | |
</params> | |
</command> | |
<command id='cdr interval <1-2147483647>'> | |
<params> | |
<param name='cdr' doc='CDR' /> | |
<param name='interval' doc='PDP periodic log interval' /> | |
<param name='<1-2147483647>' doc='Seconds' /> | |
</params> | |
</command> | |
<command id='ggsn dynamic'> | |
<params> | |
<param name='ggsn' doc='Configure the GGSN information' /> | |
<param name='dynamic' doc='Enable dynamic GRX based look-up (requires restart)' /> | |
</params> | |
</command> | |
<command id='grx-dns-add A.B.C.D'> | |
<params> | |
<param name='grx-dns-add' doc='Add DNS server' /> | |
<param name='A.B.C.D' doc='IPv4 address' /> | |
</params> | |
</command> | |
<command id='timer t3312 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3312' doc='Periodic RA Update timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3322 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3322' doc='Detach request -> accept timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3350 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3350' doc='Waiting for ATT/RAU/TMSI_COMPL timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3360 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3360' doc='Waiting for AUTH/CIPH response timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3370 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3370' doc='Waiting for IDENTITY response timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3313 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3313' doc='Waiting for paging response timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3314 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3314' doc='Force to STANDBY on expiry timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3316 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3316' doc='AA-Ready timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3385 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3385' doc='Wait for ACT PDP CTX REQ timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3386 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3386' doc='Wait for MODIFY PDP CTX ACK timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3395 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3395' doc='Wait for DEACT PDP CTX ACK timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='timer t3397 <0-65535>'> | |
<params> | |
<param name='timer' doc='Configure GPRS Timers' /> | |
<param name='t3397' doc='Wait for DEACT AA PDP CTX ACK timer (s)' /> | |
<param name='<0-65535>' doc='Timer Value in seconds' /> | |
</params> | |
</command> | |
<command id='no compression rfc1144'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='compression' doc='Configure compression' /> | |
<param name='rfc1144' doc='disable rfc1144 TCP/IP header compression' /> | |
</params> | |
</command> | |
<command id='compression rfc1144 active slots <1-256>'> | |
<params> | |
<param name='compression' doc='Configure compression' /> | |
<param name='rfc1144' doc='RFC1144 Header compresion scheme' /> | |
<param name='active' doc='Compression is actively proposed' /> | |
<param name='slots' doc='Number of compression state slots' /> | |
<param name='<1-256>' doc='Number of compression state slots' /> | |
</params> | |
</command> | |
<command id='compression rfc1144 passive'> | |
<params> | |
<param name='compression' doc='Configure compression' /> | |
<param name='rfc1144' doc='RFC1144 Header compresion scheme' /> | |
<param name='passive' doc='Compression is available on request' /> | |
</params> | |
</command> | |
<command id='no compression v42bis'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='compression' doc='Configure compression' /> | |
<param name='v42bis' doc='disable V.42bis data compression' /> | |
</params> | |
</command> | |
<command id='compression v42bis active direction (ms|sgsn|both) codewords <512-65535> strlen <6-250>'> | |
<params> | |
<param name='compression' doc='Configure compression' /> | |
<param name='v42bis' doc='V.42bis data compresion scheme' /> | |
<param name='active' doc='Compression is actively proposed' /> | |
<param name='direction' doc='Direction in which the compression shall be active (p0)' /> | |
<param name='ms' doc='Compress ms->sgsn direction only' /> | |
<param name='sgsn' doc='Compress sgsn->ms direction only' /> | |
<param name='both' doc='Both directions' /> | |
<param name='codewords' doc='Number of codewords (p1)' /> | |
<param name='<512-65535>' doc='Number of codewords' /> | |
<param name='strlen' doc='Maximum string length (p2)' /> | |
<param name='<6-250>' doc='Maximum string length' /> | |
</params> | |
</command> | |
<command id='compression v42bis passive'> | |
<params> | |
<param name='compression' doc='Configure compression' /> | |
<param name='v42bis' doc='V.42bis data compresion scheme' /> | |
<param name='passive' doc='Compression is available on request' /> | |
</params> | |
</command> | |
</node> | |
</vtydoc> |