| osmo-pcu (0.7.0) unstable; urgency=medium |
| |
| [ Rafael Diniz ] |
| * Added support for daemonize to osmo-pcu. |
| * Fix help message formatting of osmo-pcu. |
| |
| [ Max ] |
| * Don't install pcuif_proto.h header |
| * Move C include to proper place |
| * Add define for dummy burst string |
| * Add encoding tests for Immediate Assignment |
| * Clarify write_immediate_assignment() signature |
| * Restructure IA Rest Octets encoders |
| * Rewrite Packet Downlink Assignment |
| * Rewrite EGPRS Packet Uplink IA Rest Octets for MBA |
| * Rewrite EGPRS Packet Uplink IA Rest Octets for SBA |
| * MCS: internalize 'family' parameter |
| * EDGE tests: reduce code duplication |
| * MCS: remove dead code |
| * EDGE tests: remove no-op check |
| * Use msgb_eq_data_print() in tests |
| * Tighten lqual table limits check |
| * Enable LGLOBAL logging for TBF tests |
| * Log (M)CS UL update errors |
| * MCS: move Coding Scheme enum outside of class definition |
| * Make get_retx_mcs() into regular function |
| * MCS: remove unused function |
| * Debian: bump copyright year |
| * Use unique NSEI/BVCI/NSVCI in TBF tests |
| * MS store: move test helper to unit test |
| * Explicitly clean up BTS singleton |
| * MCS: move HeaderType enum outside of class definition |
| * MCS: use value_string for conversion |
| * TBF-DL: log MCS as string |
| * Fix TA index encoder |
| * MCS: move Mode enum outside of class definition |
| * MCS: add mcs_is_*() helpers |
| * MCS: add Channel Coding Command encoder |
| * Fix Channel Coding Command for MCS |
| * Rewrite Packet Uplink IA Rest Octets for MBA |
| * Rewrite Packet Uplink IA Rest Octets for SBA |
| * Use Timing Advance Index in UL assignments |
| * TBF: update MCS counters |
| * TBF-DL: cosmetic update for helper routines |
| * Update IA Rest Octets encoding |
| * TS alloc: expand tests log |
| * vty: add commands to show TBF of a certain kind |
| * Update MCS selection for retransmission |
| * cosmetic: use const pointer for bts_data |
| * Add test for MS mode and (M)CS settings |
| * Use libosmocore for IMSI parsing |
| |
| [ Harald Welte ] |
| * Mark gprs_ns_reconnect() as static (not used outside of C file) |
| * Optionally Use the NS Sub-Network-Service (SNS) on Gb |
| * pcu_l1_if: Fix erroneous endian-swapping of the CellID |
| * Forward GPRS SUSPEND REQ from BTS to SGSN using BSSGP |
| * gprs_debug: Use named initializers and explicit array indicies |
| * bssgp: Fix dead code: PDUT_STATUS can never reach this part |
| |
| [ JF Dionne ] |
| * encoding: Fixes TMSI vs MI bit selection in repeated page info |
| |
| [ Oliver Smith ] |
| * tests: use -no-install libtool flag to avoid ./lt-* scripts |
| * debian: create -doc subpackage with pdf manuals |
| * contrib/jenkins.sh: run "make maintainer-clean" |
| |
| [ Daniel Willmann ] |
| * Include pdch.h in bts.h even if we're not compiling C++ |
| * oc2g: Remove custom alarms |
| * oc2g: Change log type (Litecell15->Oc2g) |
| * jenkins.sh: Add oc2g build support |
| * manuals: Add script to regenerate vty/counter documentation |
| * manuals: Update VTY documentation |
| |
| [ Jean-Francois Dionne ] |
| * Initial commit for OC-2G support. |
| |
| [ Minh-Quang Nguyen ] |
| * OC-2G: Fix missing header |
| * OC-2G: Fix TA adjustment |
| * OC-2G: Always use positive TA information provided in PH-RA-IND |
| |
| [ Alexander Couzens ] |
| * gprs_bssgp_pcu: make gprs_bssgp_ns_cb public |
| * gprs_bssgp_pcu: explicit allocate & initialize bssgp_nsi instance |
| * encoding: correct encoding of CRBB in ACK/NACK when not byte aligned |
| * encoding: use `/* */` for comments instead of `#if 0 #endif` |
| * egprs_rlc_compression: fix white spaces |
| * tests/BitcompTest: fix wording in log message |
| * rlc: replace int with uint16_t |
| * Encoding: drop struct gprs_rlcmac_bts* from all functions |
| * decompress_crbb: add length argument for search_runlen |
| * Encoding: write_packet_ack_nack_desc_egprs: don't use a reference for rest_bits |
| * bts.cpp: ensure left-shift operation does not exceed uint32_t |
| * Encoding: use uint16_t when interacting with the window object |
| * Encoding: ACK/NACK: always encode with length field present |
| |
| [ Keith ] |
| * Cosmetic: Osmcoom -> Osmocom |
| |
| [ Vadim Yanitskiy ] |
| * src/pcu_l1_if.cpp: fix: properly pass measurements from PCUIF |
| * gprs_bssgp_pcu_rx_dl_ud(): fix: BSSGP_IE_IMSI is optional |
| * gprs_bssgp_pcu.cpp: check return code of gsm48_mi_to_string() |
| * gprs_bssgp_pcu_rx_dl_ud(): use OSMO_IMSI_BUF_SIZE |
| |
| [ Thorsten Alteholz ] |
| * fix spelling errors detected by lintian |
| |
| [ Eric Wild ] |
| * ubsan: fix shift |
| |
| [ Pau Espin Pedrol ] |
| * Remove undefined param passed to {logging,osmo_stats}_vty_add_cmds |
| * Require newer libosmocore to avoid compile failures |
| |
| -- Pau Espin Pedrol <pespin@sysmocom.de> Wed, 07 Aug 2019 21:09:53 +0200 |
| |
| osmo-pcu (0.6.0) unstable; urgency=medium |
| |
| [ Harald Welte ] |
| * debian/rules: Don't overwrite .tarball-version |
| * gprs_rlcmac_received_lost(): Fix regression / uninitialized now_tv |
| * initial checkin of manuals to public repo |
| * Add link to Asciidoc source code of manual |
| * Initial place-holder for the new Gb/IP interface documentation |
| * Gb message sequence chart: flip sides (SGSN should be right) |
| * Gb message sequence chart: Add notion of PCU unix domain socket |
| * Gb: Various spelling fixes |
| * gb: Some language improvements, formatting changes |
| * consistently use '3GPP TS' not sometimes 3GPP TS and sometimes TS. |
| * gb/NS: Clarify the language regarding the UDP port numbers / socket |
| * vty-ref: Update URI of docbook 5.0 schema |
| |
| [ Pau Espin Pedrol ] |
| * Cleanup of systemd service files |
| * configure.ac: Set CXXFLAGS during --enable-sanitize |
| * Install systemd services with autotools |
| * Move examples/ to doc/examples/ |
| * Install osmo-pcu.cfg to docdir/examples |
| * Allow easily disabling GFDL references |
| |
| [ Stefan Sperling ] |
| * check for overlong unix socket paths |
| |
| [ Max ] |
| * deb: add missing copyright file |
| * OsmoPCU: fix Gb documentation front page |
| * OsmoPCU: expand NS documentation |
| * OsmoPCU: expand BSSGP documentation |
| * OsmoPCU: add MSC chart |
| |
| [ Neels Hofmeyr ] |
| * Importing history from osmo-gsm-manuals.git |
| * make clean: also remove generated image files |
| * add 'make check' target |
| * fix 'make clean': shell glob, ignore failure |
| * refactor Makefile build rules, don't use the FORCE |
| |
| [ Jonathan Brielmaier ] |
| * fix various typos across all manuals |
| |
| [ Philipp ] |
| * configuration: fixing typos |
| |
| [ Alexander Couzens ] |
| * OsmoPCU: add rate counter documentation |
| |
| [ Daniel Willmann ] |
| * Change OpenBSC mentions to OsmoBSC where applicable |
| |
| [ Oliver Smith ] |
| * build manuals moved here from osmo-gsm-manuals.git |
| * Fix DISTCHECK_CONFIGURE_FLAGS override |
| * contrib/jenkins.sh: build and publish manuals |
| * contrib: fix makedistcheck with disabled systemd |
| |
| -- Harald Welte <laforge@gnumonks.org> Mon, 21 Jan 2019 19:03:52 +0100 |
| |
| osmo-pcu (0.5.1) unstable; urgency=medium |
| |
| [ Harald Welte ] |
| * Don't register SIGHUP handler without actually handling SIGHUP |
| |
| [ Pau Espin Pedrol ] |
| * tbf: Fix memset(0) on object with no trivial copy-assignment |
| * rlc: Fix memset(0) on object with no trivial copy-assignment |
| * jenkins.sh: use flag --enable-werror for sysmo and none |
| * tbf: Use incrementing id for rate_ctr_group_alloc |
| * tbf: Replace '.' in counter names with ':' |
| |
| [ Stefan Sperling ] |
| * fix a one-byte stack buffer overrun in osmo-pcu |
| * read monotonic clock with clock_gettime() instead of gettimeofday() |
| * fix time-delta calculations for measurement reports |
| * change log level of "DL packet loss" log messages |
| * check bssgp_tlv_parse() return code in gprs_bssgp_pcu_rcvmsg() |
| |
| -- Pau Espin Pedrol <pespin@sysmocom.de> Fri, 27 Jul 2018 21:56:38 +0200 |
| |
| osmo-pcu (0.5.0) unstable; urgency=medium |
| |
| [ Neels Hofmeyr ] |
| * jenkins: use osmo-clean-workspace.sh before and after build |
| * vty: skip installing cmds now always installed by default |
| * implement support for 3-digit MNC with leading zeros |
| * configure: add --enable-werror |
| * mslot_class: find_free_tfi(): use uint32_t to shift 1 << 31 |
| * mslot_class: two more: use uint32_t to shift 1 << 31 |
| * Revert "Use Timing Advance Index in UL assignments" |
| * Revert "Rewrite Packet Uplink Assignment" |
| * Revert "Rewrite Packet Downlink Assignment" |
| * configure: fix --enable-sysmocom-dsp and --with-sysmobts flags |
| * configure: properly quote CFLAGS in lc15 check |
| * Revert "Rewrite EGPRS Packet Uplink Assignment" |
| * use osmo_init_logging2() with proper talloc ctx |
| |
| [ Minh-Quang Nguyen ] |
| * PCU: Fix TA adjustment |
| * PCU: display TA information in TBF stats |
| |
| [ Max ] |
| * Remove unused parameter |
| * Move multislot table to separate file |
| * Replace '.' in counter names with ':' |
| * Fix compiler warning |
| * TBF: log timer override |
| * TBF: fix compiler warning in test |
| * TBF: expand timer logging |
| * vty: print class and TBFs for each MS |
| * DL window: constify resend_needed() function |
| * TBF: move EGPRS enablement into (U|D)L-TBF |
| * TBF-DL: fix misleading idle time check |
| * TBF: remove unused variable |
| * Remove unused includes and forward declarations |
| * Fix tests after rate_ctr change |
| * Introduce LOGTBF* for consistent logging |
| * TBF: implement independent T31xx timers |
| * TBF: add N3101 counter |
| * Fix warnings |
| * Add function to get max supported MS class |
| * Add --enable-sanitize configure option |
| * Enable sanitize for CI test |
| * Add tests for pcu_lsb() |
| * Add optional profiling support |
| * TBF: unify timer handling |
| * TBF: log timer invocation source |
| * TBF: bail out for unknown timers |
| * Fix llc_queue_size() type |
| * TBF-DL: mark rcvd_dl_ack() parameters as boolean |
| * window: move encoding into functions |
| * cosmetic: clarify coding scheme and puncturing |
| * Make TBF state private |
| * TBF: cleanup state flag handling |
| * Clarify RACH-related interfaces |
| * TBF-UL: add simpler test helper |
| * Avoid code duplication in TBF test |
| * TBF: move window parameters to UL/DL level |
| * TBF-DL: move priority computation into function |
| * TBF: unify EGPRS window calculation |
| * Don't access TBF internals in vty functions |
| * Fix jenkins.sh to match jenkins job axis filter |
| * Allocate global context for TypesTest |
| * Fix sanitizer build |
| * Rewrite EGPRS Packet Uplink Assignment |
| * Rewrite Packet Downlink Assignment |
| * Rewrite Packet Uplink Assignment |
| * Use Timing Advance Index in UL assignments |
| * Allow specifying sysmocom headers explicitly |
| * TBF: log source of state transitions |
| * jenkins.sh: Disable building doxygen for deps |
| * Set V_N and V_B to known initial state |
| * TBF: add dedicated log categories |
| * TBF: make UL/DL state internal |
| * TBF: make UL ack state internal |
| * TBF: make poll state internal |
| * TBF: adjust test log levels |
| * Add tests for find_multi_slots() |
| * AllocTest: adjust test_alloc_b() |
| * AllocTest: expand test output |
| * AllocTest: remove assumption on max MS class |
| * Add multislot classes from latest spec |
| * cosmetic: fix whitespace issue with include files |
| * TBF: decrease L1 logging verbosity in test |
| * TBF: override send function via linker option |
| * Simplify TS alloc: adjust allocator signatures |
| * Simplify TS alloc: fix allocation calls |
| * Simplify TS alloc: avoid TS reassignment |
| * Simplify TS alloc: use defines for constants |
| * Simplify TS alloc: adjust function signatures |
| * TS alloc: print suggested TRX on allocation errors |
| * Simplify TS alloc: internalize TRX check |
| * TBF: decrease logging verbosity for traffic |
| * TBF: add helpers for assignment type handling |
| * TBF: show assignment kind in vty |
| * vty: drop unused function |
| * RACH: improve single block detection |
| * TBF: move common test code into functions |
| * emu: use libosmocore definitions |
| * Use explicit type for pcu_lsb() |
| * Move paging generation into PDCH |
| * Move include guard to the top |
| * Update header includes |
| * Simplify TS alloc: split off RX mask computation |
| * Simplify TS alloc: separate capacity computation |
| * Simplify TS alloc: split allocation |
| * Simplify TS alloc: split USF/UL allocation |
| * Move PDCH-related functions into separate files |
| * Simplify TS alloc: don't use PDCH for free TFI |
| * Simplify TS alloc: constify max dl slot func |
| * TBF: make network counters internal |
| * Simplify TS alloc: move slot assignment |
| * Simplify TS alloc: move slot check into functions |
| |
| [ Pau Espin Pedrol ] |
| * Print error cause of pcu socket connect failure |
| * gprs_bssgp_pcu.cpp: Comment unused function parse_ra_cap |
| |
| [ Stefan Sperling ] |
| * Make osmo-pcu wait for BTS to become available at start-up time. |
| * improve documentation of Encoding::write_paging_request() |
| |
| [ Alexander Couzens ] |
| * pcuif_proto.h: fix whitespaces and indention |
| * pcuif_proto: add version 8 features |
| |
| [ Philipp Maier ] |
| * cosmetic: remove runaway semicolon |
| * pcu_l1_if: add frame number to log output |
| * tbf: add frame number to log output |
| |
| -- Pau Espin Pedrol <pespin@sysmocom.de> Thu, 03 May 2018 16:20:00 +0200 |
| |
| osmo-pcu (0.4.0) unstable; urgency=medium |
| |
| [ Holger Hans Peter Freyther ] |
| * Initial release. |
| |
| [ Max ] |
| * Use value string check from osmo-ci |
| * cosmetic: tighten direct-phy related code |
| * Support receiving SI13 from BTS |
| * Move gsmtap and accounting into separate function |
| * cosmetic: convert explicit warnings to fixme/todo |
| * Assert valid CS |
| * TBF-DL: extend index check for RLC block copy |
| * TS alloc: properly count UL slots |
| * cosmetic: reformat multislot classes table |
| |
| [ Philipp Maier ] |
| * gb: allow only packets from a specific SGSN |
| |
| [ Harald Welte ] |
| * tests: Don't use private version of log_info but global gprs_log_info |
| * Call osmo_init_logging() before static BTS constructor |
| * Forward GPRS SUSPEND REQ from BTS to SGSN using BSSGP |
| * Debian: Cosmetic changes to control file; add better Description |
| * Debian: print test results in case of failure + clean-up autotest |
| * Debian: migrate from DEB_BUILD_HARDENING to DEB_BUILD_MAINT_OPTIONS |
| * Debian: upgrade to debhelper 9 / Standards 3.9.8 |
| |
| -- Harald Welte <laforge@gnumonks.org> Sun, 29 Oct 2017 12:03:05 +0100 |
| |
| osmo-pcu (0.3.0) UNRELEASED; urgency=medium |
| |
| * Initial release. |
| |
| -- Holger Hans Peter Freyther <holger@moiji-mobile.com> Fri, 01 Apr 2016 18:59:00 +0200 |