initial checkin of manuals to public repo
The manuals existed in different form for several years in an internal
sysmocom repository. However, since they had just recently been
converted from docboox-xml to asciidoc and all files have been
re-shuffled for enabling the public release, there's not much point in
keeping the history with git-filter-branch.
diff --git a/doc/manuals/vty/osmo-pcu_vty_reference.xml b/doc/manuals/vty/osmo-pcu_vty_reference.xml
new file mode 100644
index 0000000..bf1532d
--- /dev/null
+++ b/doc/manuals/vty/osmo-pcu_vty_reference.xml
@@ -0,0 +1,941 @@
+<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
+ <node id='0'>
+ </node>
+ <node id='1'>
+ <command id='show version'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='version' doc='Displays program version' />
+ </params>
+ </command>
+ <command id='show online-help'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='online-help' doc='Online help' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='enable'>
+ <params>
+ <param name='enable' doc='Turn on privileged mode command' />
+ </params>
+ </command>
+ <command id='terminal length <0-512>'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='length' doc='Set number of lines on a screen' />
+ <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+ </params>
+ </command>
+ <command id='terminal no length'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='length' doc='Set number of lines on a screen' />
+ </params>
+ </command>
+ <command id='echo .MESSAGE'>
+ <params>
+ <param name='echo' doc='Echo a message back to the vty' />
+ <param name='.MESSAGE' doc='The message to echo' />
+ </params>
+ </command>
+ <command id='who'>
+ <params>
+ <param name='who' doc='Display who is on vty' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='logging enable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='enable' doc='Enables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging disable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='disable' doc='Disables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging set-log-mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set-log-mask' doc='Set the logmask of this logging target' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging set log mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set' doc='Decide which categories to output.' />
+ <param name='log' doc='Log commands' />
+ <param name='mask' doc='Mask commands' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='csn1' doc='Concrete Syntax Notation One (CSN1)' />
+ <param name='l1if' doc='GPRS PCU L1 interface (L1IF)' />
+ <param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' />
+ <param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' />
+ <param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' />
+ <param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' />
+ <param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' />
+ <param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='pcu' doc='GPRS Packet Control Unit (PCU)' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='show logging vty'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='logging' doc='Show current logging configuration' />
+ <param name='vty' doc='Show current logging configuration for this vty' />
+ </params>
+ </command>
+ <command id='show alarms'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='alarms' doc='Show current logging configuration' />
+ </params>
+ </command>
+ <command id='show bts statistics'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bts' doc='BTS related functionality' />
+ <param name='statistics' doc='Statistics' />
+ </params>
+ </command>
+ <command id='show tbf all'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='tbf' doc='information about all current TBFs' />
+ <param name='all' doc='(null)' />
+ </params>
+ </command>
+ </node>
+ <node id='2'>
+ </node>
+ <node id='3'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='disable'>
+ <params>
+ <param name='disable' doc='Turn off privileged mode command' />
+ </params>
+ </command>
+ <command id='configure terminal'>
+ <params>
+ <param name='configure' doc='Configuration from vty interface' />
+ <param name='terminal' doc='Configuration terminal' />
+ </params>
+ </command>
+ <command id='copy running-config startup-config'>
+ <params>
+ <param name='copy' doc='Copy configuration' />
+ <param name='running-config' doc='Copy running config to... ' />
+ <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
+ </params>
+ </command>
+ <command id='show startup-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='startup-config' doc='Contentes of startup configuration' />
+ </params>
+ </command>
+ <command id='show version'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='version' doc='Displays program version' />
+ </params>
+ </command>
+ <command id='show online-help'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='online-help' doc='Online help' />
+ </params>
+ </command>
+ <command id='terminal length <0-512>'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='length' doc='Set number of lines on a screen' />
+ <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+ </params>
+ </command>
+ <command id='terminal no length'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='length' doc='Set number of lines on a screen' />
+ </params>
+ </command>
+ <command id='echo .MESSAGE'>
+ <params>
+ <param name='echo' doc='Echo a message back to the vty' />
+ <param name='.MESSAGE' doc='The message to echo' />
+ </params>
+ </command>
+ <command id='who'>
+ <params>
+ <param name='who' doc='Display who is on vty' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='terminal monitor'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='monitor' doc='Copy debug output to the current terminal line' />
+ </params>
+ </command>
+ <command id='terminal no monitor'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='monitor' doc='Copy debug output to the current terminal line' />
+ </params>
+ </command>
+ <command id='logging enable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='enable' doc='Enables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging disable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='disable' doc='Disables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging set-log-mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set-log-mask' doc='Set the logmask of this logging target' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging set log mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set' doc='Decide which categories to output.' />
+ <param name='log' doc='Log commands' />
+ <param name='mask' doc='Mask commands' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='csn1' doc='Concrete Syntax Notation One (CSN1)' />
+ <param name='l1if' doc='GPRS PCU L1 interface (L1IF)' />
+ <param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' />
+ <param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' />
+ <param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' />
+ <param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' />
+ <param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' />
+ <param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='pcu' doc='GPRS Packet Control Unit (PCU)' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='show logging vty'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='logging' doc='Show current logging configuration' />
+ <param name='vty' doc='Show current logging configuration for this vty' />
+ </params>
+ </command>
+ <command id='show alarms'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='alarms' doc='Show current logging configuration' />
+ </params>
+ </command>
+ <command id='show bts statistics'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bts' doc='BTS related functionality' />
+ <param name='statistics' doc='Statistics' />
+ </params>
+ </command>
+ <command id='show tbf all'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='tbf' doc='information about all current TBFs' />
+ <param name='all' doc='(null)' />
+ </params>
+ </command>
+ </node>
+ <node id='4'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='hostname WORD'>
+ <params>
+ <param name='hostname' doc='Set system's network name' />
+ <param name='WORD' doc='This system's network name' />
+ </params>
+ </command>
+ <command id='no hostname [HOSTNAME]'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='hostname' doc='Reset system's network name' />
+ <param name='[HOSTNAME]' doc='Host name of this router' />
+ </params>
+ </command>
+ <command id='password (8|) WORD'>
+ <params>
+ <param name='password' doc='Assign the terminal connection password' />
+ <param name='8' doc='Specifies a HIDDEN password will follow' />
+ <param name='' doc='dummy string ' />
+ <param name='WORD' doc='The HIDDEN line password string' />
+ </params>
+ </command>
+ <command id='password LINE'>
+ <params>
+ <param name='password' doc='Assign the terminal connection password' />
+ <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
+ </params>
+ </command>
+ <command id='enable password (8|) WORD'>
+ <params>
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ <param name='8' doc='Specifies a HIDDEN password will follow' />
+ <param name='' doc='dummy string ' />
+ <param name='WORD' doc='The HIDDEN 'enable' password string' />
+ </params>
+ </command>
+ <command id='enable password LINE'>
+ <params>
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
+ </params>
+ </command>
+ <command id='no enable password'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ </params>
+ </command>
+ <command id='banner motd default'>
+ <params>
+ <param name='banner' doc='Set banner string' />
+ <param name='motd' doc='Strings for motd' />
+ <param name='default' doc='Default string' />
+ </params>
+ </command>
+ <command id='banner motd file [FILE]'>
+ <params>
+ <param name='banner' doc='Set banner' />
+ <param name='motd' doc='Banner for motd' />
+ <param name='file' doc='Banner from a file' />
+ <param name='[FILE]' doc='Filename' />
+ </params>
+ </command>
+ <command id='no banner motd'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='banner' doc='Set banner string' />
+ <param name='motd' doc='Strings for motd' />
+ </params>
+ </command>
+ <command id='service terminal-length <0-512>'>
+ <params>
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='terminal-length' doc='System wide terminal length configuration' />
+ <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
+ </params>
+ </command>
+ <command id='no service terminal-length [<0-512>]'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='terminal-length' doc='System wide terminal length configuration' />
+ <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
+ </params>
+ </command>
+ <command id='line vty'>
+ <params>
+ <param name='line' doc='Configure a terminal line' />
+ <param name='vty' doc='Virtual terminal' />
+ </params>
+ </command>
+ <command id='service advanced-vty'>
+ <params>
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+ </params>
+ </command>
+ <command id='no service advanced-vty'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='log stderr'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='stderr' doc='Logging via STDERR of the process' />
+ </params>
+ </command>
+ <command id='no log stderr'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='stderr' doc='Logging via STDERR of the process' />
+ </params>
+ </command>
+ <command id='log file .FILENAME'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='file' doc='Logging to text file' />
+ <param name='.FILENAME' doc='Filename' />
+ </params>
+ </command>
+ <command id='no log file .FILENAME'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='file' doc='Logging to text file' />
+ <param name='.FILENAME' doc='Filename' />
+ </params>
+ </command>
+ <command id='log alarms <2-32700>'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='alarms' doc='Logging alarms to osmo_strrb' />
+ <param name='<2-32700>' doc='Maximum number of messages to log' />
+ </params>
+ </command>
+ <command id='no log alarms'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='alarms' doc='Logging alarms to osmo_strrb' />
+ </params>
+ </command>
+ <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ <param name='authpriv' doc='Security/authorization messages facility' />
+ <param name='cron' doc='Clock daemon (cron/at) facility' />
+ <param name='daemon' doc='General system daemon facility' />
+ <param name='ftp' doc='Ftp daemon facility' />
+ <param name='lpr' doc='Line printer facility' />
+ <param name='mail' doc='Mail facility' />
+ <param name='news' doc='News facility' />
+ <param name='user' doc='Generic facility' />
+ <param name='uucp' doc='UUCP facility' />
+ </params>
+ </command>
+ <command id='log syslog local <0-7>'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ <param name='local' doc='Syslog LOCAL facility' />
+ <param name='<0-7>' doc='Local facility number' />
+ </params>
+ </command>
+ <command id='no log syslog'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ </params>
+ </command>
+ <command id='pcu'>
+ <params>
+ <param name='pcu' doc='BTS specific configure' />
+ </params>
+ </command>
+ </node>
+ <node id='7'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='csn1' doc='Concrete Syntax Notation One (CSN1)' />
+ <param name='l1if' doc='GPRS PCU L1 interface (L1IF)' />
+ <param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' />
+ <param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' />
+ <param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' />
+ <param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' />
+ <param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' />
+ <param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='pcu' doc='GPRS Packet Control Unit (PCU)' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ </node>
+ <node id='8'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='login'>
+ <params>
+ <param name='login' doc='Enable password checking' />
+ </params>
+ </command>
+ <command id='no login'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='login' doc='Enable password checking' />
+ </params>
+ </command>
+ </node>
+ <node id='14'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='no two-phase-access'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='two-phase-access' doc='Only use two phase access when requested my MS' />
+ </params>
+ </command>
+ <command id='cs <1-4> [<1-4>]'>
+ <params>
+ <param name='cs' doc='Set the Coding Scheme to be used, (overrides BTS config)' />
+ <param name='<1-4>' doc='Initial CS used' />
+ <param name='[<1-4>]' doc='Alternative uplink CS' />
+ </params>
+ </command>
+ <command id='no cs'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='cs' doc='Don't force given Coding Scheme, (use BTS config)' />
+ </params>
+ </command>
+ <command id='queue lifetime <1-65534>'>
+ <params>
+ <param name='queue' doc='Packet queue options' />
+ <param name='lifetime' doc='Set lifetime limit of LLC frame in centi-seconds (overrides the value given by SGSN)' />
+ <param name='<1-65534>' doc='Lifetime in centi-seconds' />
+ </params>
+ </command>
+ <command id='queue lifetime infinite'>
+ <params>
+ <param name='queue' doc='Packet queue options' />
+ <param name='lifetime' doc='Set lifetime limit of LLC frame in centi-seconds (overrides the value given by SGSN)' />
+ <param name='infinite' doc='Infinite lifetime' />
+ </params>
+ </command>
+ <command id='no queue lifetime'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='queue' doc='Packet queue options' />
+ <param name='lifetime' doc='Disable lifetime limit of LLC frame (use value given by SGSN)' />
+ </params>
+ </command>
+ <command id='alloc-algorithm (a|b)'>
+ <params>
+ <param name='alloc-algorithm' doc='Select slot allocation algorithm to use when assigning timeslots on PACCH' />
+ <param name='a' doc='Single slot is assigned only' />
+ <param name='b' doc='Multiple slots are assigned for semi-duplex operation' />
+ </params>
+ </command>
+ <command id='two-phase-access'>
+ <params>
+ <param name='two-phase-access' doc='Force two phase access when MS requests single phase access' />
+ </params>
+ </command>
+ <command id='flow-control-interval <1-10>'>
+ <params>
+ <param name='flow-control-interval' doc='Interval between sending subsequent Flow Control PDUs' />
+ <param name='<1-10>' doc='Interval time in seconds' />
+ </params>
+ </command>
+ <command id='alpha <0-10>'>
+ <params>
+ <param name='alpha' doc='Alpha parameter for MS power control in units of 0.1 (see TS 05.08) NOTE: Be sure to set Alpha value at System information 13 too.' />
+ <param name='<0-10>' doc='Alpha in units of 0.1' />
+ </params>
+ </command>
+ <command id='gamma <0-62>'>
+ <params>
+ <param name='gamma' doc='Gamma parameter for MS power control in units of dB (see TS 05.08)' />
+ <param name='<0-62>' doc='Gamma in even unit of dBs' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode' />
+ </params>
+ </command>
+ </node>
+</vtydoc>
\ No newline at end of file