<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> | |
<node id='0'> | |
</node> | |
<node id='1'> | |
<command id='show version'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='version' doc='Displays program version' /> | |
</params> | |
</command> | |
<command id='show online-help'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='online-help' doc='Online help' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='enable'> | |
<params> | |
<param name='enable' doc='Turn on privileged mode command' /> | |
</params> | |
</command> | |
<command id='terminal length <0-512>'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
<param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> | |
</params> | |
</command> | |
<command id='terminal no length'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
</params> | |
</command> | |
<command id='echo .MESSAGE'> | |
<params> | |
<param name='echo' doc='Echo a message back to the vty' /> | |
<param name='.MESSAGE' doc='The message to echo' /> | |
</params> | |
</command> | |
<command id='who'> | |
<params> | |
<param name='who' doc='Display who is on vty' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='logging enable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='enable' doc='Enables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging disable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='disable' doc='Disables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging set-log-mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set-log-mask' doc='Set the logmask of this logging target' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging set log mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set' doc='Decide which categories to output.' /> | |
<param name='log' doc='Log commands' /> | |
<param name='mask' doc='Mask commands' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='csn1' doc='Concrete Syntax Notation One (CSN1)' /> | |
<param name='l1if' doc='GPRS PCU L1 interface (L1IF)' /> | |
<param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' /> | |
<param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' /> | |
<param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' /> | |
<param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' /> | |
<param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' /> | |
<param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='pcu' doc='GPRS Packet Control Unit (PCU)' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='everything' doc='Log simply everything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
<command id='show logging vty'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='logging' doc='Show current logging configuration' /> | |
<param name='vty' doc='Show current logging configuration for this vty' /> | |
</params> | |
</command> | |
<command id='show alarms'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='alarms' doc='Show current logging configuration' /> | |
</params> | |
</command> | |
<command id='show bts statistics'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='bts' doc='BTS related functionality' /> | |
<param name='statistics' doc='Statistics' /> | |
</params> | |
</command> | |
<command id='show tbf all'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='tbf' doc='information about all current TBFs' /> | |
<param name='all' doc='(null)' /> | |
</params> | |
</command> | |
</node> | |
<node id='2'> | |
</node> | |
<node id='3'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='disable'> | |
<params> | |
<param name='disable' doc='Turn off privileged mode command' /> | |
</params> | |
</command> | |
<command id='configure terminal'> | |
<params> | |
<param name='configure' doc='Configuration from vty interface' /> | |
<param name='terminal' doc='Configuration terminal' /> | |
</params> | |
</command> | |
<command id='copy running-config startup-config'> | |
<params> | |
<param name='copy' doc='Copy configuration' /> | |
<param name='running-config' doc='Copy running config to... ' /> | |
<param name='startup-config' doc='Copy running config to startup config (same as write file)' /> | |
</params> | |
</command> | |
<command id='show startup-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='startup-config' doc='Contentes of startup configuration' /> | |
</params> | |
</command> | |
<command id='show version'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='version' doc='Displays program version' /> | |
</params> | |
</command> | |
<command id='show online-help'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='online-help' doc='Online help' /> | |
</params> | |
</command> | |
<command id='terminal length <0-512>'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
<param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> | |
</params> | |
</command> | |
<command id='terminal no length'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
</params> | |
</command> | |
<command id='echo .MESSAGE'> | |
<params> | |
<param name='echo' doc='Echo a message back to the vty' /> | |
<param name='.MESSAGE' doc='The message to echo' /> | |
</params> | |
</command> | |
<command id='who'> | |
<params> | |
<param name='who' doc='Display who is on vty' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='terminal monitor'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='monitor' doc='Copy debug output to the current terminal line' /> | |
</params> | |
</command> | |
<command id='terminal no monitor'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='monitor' doc='Copy debug output to the current terminal line' /> | |
</params> | |
</command> | |
<command id='logging enable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='enable' doc='Enables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging disable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='disable' doc='Disables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging set-log-mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set-log-mask' doc='Set the logmask of this logging target' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging set log mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set' doc='Decide which categories to output.' /> | |
<param name='log' doc='Log commands' /> | |
<param name='mask' doc='Mask commands' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='csn1' doc='Concrete Syntax Notation One (CSN1)' /> | |
<param name='l1if' doc='GPRS PCU L1 interface (L1IF)' /> | |
<param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' /> | |
<param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' /> | |
<param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' /> | |
<param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' /> | |
<param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' /> | |
<param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='pcu' doc='GPRS Packet Control Unit (PCU)' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='everything' doc='Log simply everything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
<command id='show logging vty'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='logging' doc='Show current logging configuration' /> | |
<param name='vty' doc='Show current logging configuration for this vty' /> | |
</params> | |
</command> | |
<command id='show alarms'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='alarms' doc='Show current logging configuration' /> | |
</params> | |
</command> | |
<command id='show bts statistics'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='bts' doc='BTS related functionality' /> | |
<param name='statistics' doc='Statistics' /> | |
</params> | |
</command> | |
<command id='show tbf all'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='tbf' doc='information about all current TBFs' /> | |
<param name='all' doc='(null)' /> | |
</params> | |
</command> | |
</node> | |
<node id='4'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='hostname WORD'> | |
<params> | |
<param name='hostname' doc='Set system's network name' /> | |
<param name='WORD' doc='This system's network name' /> | |
</params> | |
</command> | |
<command id='no hostname [HOSTNAME]'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='hostname' doc='Reset system's network name' /> | |
<param name='[HOSTNAME]' doc='Host name of this router' /> | |
</params> | |
</command> | |
<command id='password (8|) WORD'> | |
<params> | |
<param name='password' doc='Assign the terminal connection password' /> | |
<param name='8' doc='Specifies a HIDDEN password will follow' /> | |
<param name='' doc='dummy string ' /> | |
<param name='WORD' doc='The HIDDEN line password string' /> | |
</params> | |
</command> | |
<command id='password LINE'> | |
<params> | |
<param name='password' doc='Assign the terminal connection password' /> | |
<param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> | |
</params> | |
</command> | |
<command id='enable password (8|) WORD'> | |
<params> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
<param name='8' doc='Specifies a HIDDEN password will follow' /> | |
<param name='' doc='dummy string ' /> | |
<param name='WORD' doc='The HIDDEN 'enable' password string' /> | |
</params> | |
</command> | |
<command id='enable password LINE'> | |
<params> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
<param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> | |
</params> | |
</command> | |
<command id='no enable password'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
</params> | |
</command> | |
<command id='banner motd default'> | |
<params> | |
<param name='banner' doc='Set banner string' /> | |
<param name='motd' doc='Strings for motd' /> | |
<param name='default' doc='Default string' /> | |
</params> | |
</command> | |
<command id='banner motd file [FILE]'> | |
<params> | |
<param name='banner' doc='Set banner' /> | |
<param name='motd' doc='Banner for motd' /> | |
<param name='file' doc='Banner from a file' /> | |
<param name='[FILE]' doc='Filename' /> | |
</params> | |
</command> | |
<command id='no banner motd'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='banner' doc='Set banner string' /> | |
<param name='motd' doc='Strings for motd' /> | |
</params> | |
</command> | |
<command id='service terminal-length <0-512>'> | |
<params> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='terminal-length' doc='System wide terminal length configuration' /> | |
<param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> | |
</params> | |
</command> | |
<command id='no service terminal-length [<0-512>]'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='terminal-length' doc='System wide terminal length configuration' /> | |
<param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> | |
</params> | |
</command> | |
<command id='line vty'> | |
<params> | |
<param name='line' doc='Configure a terminal line' /> | |
<param name='vty' doc='Virtual terminal' /> | |
</params> | |
</command> | |
<command id='service advanced-vty'> | |
<params> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='advanced-vty' doc='Enable advanced mode vty interface' /> | |
</params> | |
</command> | |
<command id='no service advanced-vty'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='advanced-vty' doc='Enable advanced mode vty interface' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='log stderr'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='stderr' doc='Logging via STDERR of the process' /> | |
</params> | |
</command> | |
<command id='no log stderr'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='stderr' doc='Logging via STDERR of the process' /> | |
</params> | |
</command> | |
<command id='log file .FILENAME'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='file' doc='Logging to text file' /> | |
<param name='.FILENAME' doc='Filename' /> | |
</params> | |
</command> | |
<command id='no log file .FILENAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='file' doc='Logging to text file' /> | |
<param name='.FILENAME' doc='Filename' /> | |
</params> | |
</command> | |
<command id='log alarms <2-32700>'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='alarms' doc='Logging alarms to osmo_strrb' /> | |
<param name='<2-32700>' doc='Maximum number of messages to log' /> | |
</params> | |
</command> | |
<command id='no log alarms'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='alarms' doc='Logging alarms to osmo_strrb' /> | |
</params> | |
</command> | |
<command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
<param name='authpriv' doc='Security/authorization messages facility' /> | |
<param name='cron' doc='Clock daemon (cron/at) facility' /> | |
<param name='daemon' doc='General system daemon facility' /> | |
<param name='ftp' doc='Ftp daemon facility' /> | |
<param name='lpr' doc='Line printer facility' /> | |
<param name='mail' doc='Mail facility' /> | |
<param name='news' doc='News facility' /> | |
<param name='user' doc='Generic facility' /> | |
<param name='uucp' doc='UUCP facility' /> | |
</params> | |
</command> | |
<command id='log syslog local <0-7>'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
<param name='local' doc='Syslog LOCAL facility' /> | |
<param name='<0-7>' doc='Local facility number' /> | |
</params> | |
</command> | |
<command id='no log syslog'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
</params> | |
</command> | |
<command id='pcu'> | |
<params> | |
<param name='pcu' doc='BTS specific configure' /> | |
</params> | |
</command> | |
</node> | |
<node id='7'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging level (all|csn1|l1if|rlcmac|rlcmacdata|rlcmacdl|rlcmacul|rlcmacsched|rlcmacmeas|bssgp|pcu|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='csn1' doc='Concrete Syntax Notation One (CSN1)' /> | |
<param name='l1if' doc='GPRS PCU L1 interface (L1IF)' /> | |
<param name='rlcmac' doc='GPRS RLC/MAC layer (RLCMAC)' /> | |
<param name='rlcmacdata' doc='GPRS RLC/MAC layer Data (RLCMAC)' /> | |
<param name='rlcmacdl' doc='GPRS RLC/MAC layer Downlink (RLCMAC)' /> | |
<param name='rlcmacul' doc='GPRS RLC/MAC layer Uplink (RLCMAC)' /> | |
<param name='rlcmacsched' doc='GPRS RLC/MAC layer Scheduling (RLCMAC)' /> | |
<param name='rlcmacmeas' doc='GPRS RLC/MAC layer Measurements (RLCMAC)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='pcu' doc='GPRS Packet Control Unit (PCU)' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='everything' doc='Log simply everything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
</node> | |
<node id='8'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='login'> | |
<params> | |
<param name='login' doc='Enable password checking' /> | |
</params> | |
</command> | |
<command id='no login'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='login' doc='Enable password checking' /> | |
</params> | |
</command> | |
</node> | |
<node id='14'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='no two-phase-access'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='two-phase-access' doc='Only use two phase access when requested my MS' /> | |
</params> | |
</command> | |
<command id='cs <1-4> [<1-4>]'> | |
<params> | |
<param name='cs' doc='Set the Coding Scheme to be used, (overrides BTS config)' /> | |
<param name='<1-4>' doc='Initial CS used' /> | |
<param name='[<1-4>]' doc='Alternative uplink CS' /> | |
</params> | |
</command> | |
<command id='no cs'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='cs' doc='Don't force given Coding Scheme, (use BTS config)' /> | |
</params> | |
</command> | |
<command id='queue lifetime <1-65534>'> | |
<params> | |
<param name='queue' doc='Packet queue options' /> | |
<param name='lifetime' doc='Set lifetime limit of LLC frame in centi-seconds (overrides the value given by SGSN)' /> | |
<param name='<1-65534>' doc='Lifetime in centi-seconds' /> | |
</params> | |
</command> | |
<command id='queue lifetime infinite'> | |
<params> | |
<param name='queue' doc='Packet queue options' /> | |
<param name='lifetime' doc='Set lifetime limit of LLC frame in centi-seconds (overrides the value given by SGSN)' /> | |
<param name='infinite' doc='Infinite lifetime' /> | |
</params> | |
</command> | |
<command id='no queue lifetime'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='queue' doc='Packet queue options' /> | |
<param name='lifetime' doc='Disable lifetime limit of LLC frame (use value given by SGSN)' /> | |
</params> | |
</command> | |
<command id='alloc-algorithm (a|b)'> | |
<params> | |
<param name='alloc-algorithm' doc='Select slot allocation algorithm to use when assigning timeslots on PACCH' /> | |
<param name='a' doc='Single slot is assigned only' /> | |
<param name='b' doc='Multiple slots are assigned for semi-duplex operation' /> | |
</params> | |
</command> | |
<command id='two-phase-access'> | |
<params> | |
<param name='two-phase-access' doc='Force two phase access when MS requests single phase access' /> | |
</params> | |
</command> | |
<command id='flow-control-interval <1-10>'> | |
<params> | |
<param name='flow-control-interval' doc='Interval between sending subsequent Flow Control PDUs' /> | |
<param name='<1-10>' doc='Interval time in seconds' /> | |
</params> | |
</command> | |
<command id='alpha <0-10>'> | |
<params> | |
<param name='alpha' doc='Alpha parameter for MS power control in units of 0.1 (see TS 05.08) NOTE: Be sure to set Alpha value at System information 13 too.' /> | |
<param name='<0-10>' doc='Alpha in units of 0.1' /> | |
</params> | |
</command> | |
<command id='gamma <0-62>'> | |
<params> | |
<param name='gamma' doc='Gamma parameter for MS power control in units of dB (see TS 05.08)' /> | |
<param name='<0-62>' doc='Gamma in even unit of dBs' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode' /> | |
</params> | |
</command> | |
</node> | |
</vtydoc> |