Sylvain Munaut | 0f91413 | 2009-12-22 21:53:22 +0100 | [diff] [blame] | 1 | -- RRLP-Components.asn |
| 2 | -- $Id$ |
| 3 | -- Taken from 3GPP TS 44.031 V7.4.0 (2007-03) |
| 4 | -- http://www.3gpp.org/ftp/Specs/archive/44_series/44.031/44031-740.zip/44031-740.doc |
| 5 | -- |
| 6 | -- 4 Components |
| 7 | -- 5 Elements of Components |
| 8 | -- |
| 9 | |
| 10 | RRLP-Components |
| 11 | -- { RRLP-Components } |
| 12 | |
| 13 | DEFINITIONS AUTOMATIC TAGS ::= |
| 14 | |
| 15 | BEGIN |
| 16 | |
| 17 | IMPORTS |
| 18 | Ext-GeographicalInformation, VelocityEstimate |
| 19 | FROM |
| 20 | MAP-LCS-DataTypes { |
| 21 | itu-t identified-organization (4) etsi (0) mobileDomain (0) |
| 22 | gsm-Network (1) modules (3) map-LCS-DataTypes (25) version11 (11)} |
| 23 | |
| 24 | ExtensionContainer |
| 25 | FROM MAP-ExtensionDataTypes { |
| 26 | itu-t identified-organization (4) etsi (0) mobileDomain (0) |
| 27 | gsm-Network (1) modules (3) map-ExtensionDataTypes (21) version11 (11)} |
| 28 | ; |
| 29 | |
| 30 | |
| 31 | -- Add here other ASN.1 definitions presented below |
| 32 | -- in chapters 4 and 5. |
| 33 | |
| 34 | -- Measurement Position request component |
| 35 | MsrPosition-Req ::= SEQUENCE { |
| 36 | positionInstruct PositionInstruct, |
| 37 | referenceAssistData ReferenceAssistData OPTIONAL, |
| 38 | msrAssistData MsrAssistData OPTIONAL, |
| 39 | systemInfoAssistData SystemInfoAssistData OPTIONAL, |
| 40 | gps-AssistData GPS-AssistData OPTIONAL, |
| 41 | extensionContainer ExtensionContainer OPTIONAL, |
| 42 | ..., |
| 43 | -- Release 98 extension element |
| 44 | rel98-MsrPosition-Req-extension Rel98-MsrPosition-Req-Extension OPTIONAL, |
| 45 | -- Release 5 extension element |
| 46 | rel5-MsrPosition-Req-extension Rel5-MsrPosition-Req-Extension OPTIONAL, |
| 47 | -- Release 7 extension element |
| 48 | rel7-MsrPosition-Req-extension Rel7-MsrPosition-Req-Extension OPTIONAL |
| 49 | } |
| 50 | |
| 51 | -- Measurement Position response component |
| 52 | MsrPosition-Rsp ::= SEQUENCE { |
| 53 | multipleSets MultipleSets OPTIONAL, |
| 54 | referenceIdentity ReferenceIdentity OPTIONAL, |
| 55 | otd-MeasureInfo OTD-MeasureInfo OPTIONAL, |
| 56 | locationInfo LocationInfo OPTIONAL, |
| 57 | gps-MeasureInfo GPS-MeasureInfo OPTIONAL, |
| 58 | locationError LocationError OPTIONAL, |
| 59 | extensionContainer ExtensionContainer OPTIONAL, |
| 60 | ..., |
| 61 | -- Release extension here |
| 62 | rel-98-MsrPosition-Rsp-Extension |
| 63 | Rel-98-MsrPosition-Rsp-Extension OPTIONAL, |
| 64 | rel-5-MsrPosition-Rsp-Extension |
| 65 | Rel-5-MsrPosition-Rsp-Extension OPTIONAL, |
| 66 | -- rel-5-MsrPosition-Rsp-Extension and other possible future extensions |
| 67 | -- are the only information elements that may be included in the 2nd |
| 68 | -- MsrPosition-Rsp component when RRLP pseudo-segmentation is used |
| 69 | rel-7-MsrPosition-Rsp-Extension |
| 70 | Rel-7-MsrPosition-Rsp-Extension OPTIONAL |
| 71 | } |
| 72 | |
| 73 | -- Assistance Data component |
| 74 | AssistanceData ::= SEQUENCE { |
| 75 | referenceAssistData ReferenceAssistData OPTIONAL, |
| 76 | msrAssistData MsrAssistData OPTIONAL, |
| 77 | systemInfoAssistData SystemInfoAssistData OPTIONAL, |
| 78 | gps-AssistData GPS-AssistData OPTIONAL, |
| 79 | moreAssDataToBeSent MoreAssDataToBeSent OPTIONAL, -- If not present, interpret as only |
| 80 | -- Assistance Data component used to |
| 81 | -- deliver entire set of assistance |
| 82 | -- data. |
| 83 | extensionContainer ExtensionContainer OPTIONAL, |
| 84 | ..., |
| 85 | -- Release extension here |
| 86 | rel98-AssistanceData-Extension Rel98-AssistanceData-Extension OPTIONAL, |
| 87 | rel5-AssistanceData-Extension Rel5-AssistanceData-Extension OPTIONAL, |
| 88 | rel7-AssistanceData-Extension Rel7-AssistanceData-Extension OPTIONAL |
| 89 | } |
| 90 | |
| 91 | -- Protocol Error component |
| 92 | ProtocolError ::= SEQUENCE { |
| 93 | errorCause ErrorCodes, |
| 94 | extensionContainer ExtensionContainer OPTIONAL, |
| 95 | ..., |
| 96 | -- Release extensions here |
| 97 | rel-5-ProtocolError-Extension Rel-5-ProtocolError-Extension OPTIONAL |
| 98 | } |
| 99 | |
| 100 | -- Position instructions |
| 101 | PositionInstruct ::= SEQUENCE { |
| 102 | -- Method type |
| 103 | methodType MethodType, |
| 104 | positionMethod PositionMethod, |
| 105 | measureResponseTime MeasureResponseTime, |
| 106 | useMultipleSets UseMultipleSets, |
| 107 | environmentCharacter EnvironmentCharacter OPTIONAL |
| 108 | } |
| 109 | |
| 110 | -- |
| 111 | MethodType ::= CHOICE { |
| 112 | msAssisted AccuracyOpt, -- accuracy is optional |
| 113 | msBased Accuracy, -- accuracy is mandatory |
| 114 | msBasedPref Accuracy, -- accuracy is mandatory |
| 115 | msAssistedPref Accuracy -- accuracy is mandatory |
| 116 | } |
| 117 | |
| 118 | -- Accuracy of the location estimation |
| 119 | AccuracyOpt ::= SEQUENCE { |
| 120 | accuracy Accuracy OPTIONAL |
| 121 | } |
| 122 | |
| 123 | -- The values of this field are defined in 3GPP TS 23.032 (Uncertainty code) |
| 124 | Accuracy ::= INTEGER (0..127) |
| 125 | |
| 126 | |
| 127 | -- Position Method |
| 128 | PositionMethod ::= ENUMERATED { |
| 129 | eotd (0), |
| 130 | gps (1), |
| 131 | gpsOrEOTD (2) |
| 132 | } |
| 133 | |
| 134 | -- Measurement request response time |
| 135 | MeasureResponseTime ::= INTEGER (0..7) |
| 136 | |
| 137 | -- useMultiple Sets, FFS! |
| 138 | UseMultipleSets ::= ENUMERATED { |
| 139 | multipleSets (0), -- multiple sets are allowed |
| 140 | oneSet (1) -- sending of multiple is not allowed |
| 141 | } |
| 142 | |
| 143 | -- Environment characterization |
| 144 | EnvironmentCharacter ::= ENUMERATED { |
| 145 | badArea (0), -- bad urban or suburban, heavy multipath and NLOS |
| 146 | notBadArea (1), -- light multipath and NLOS |
| 147 | mixedArea (2), -- not defined or mixed environment |
| 148 | ... |
| 149 | } |
| 150 | |
| 151 | -- E-OTD reference BTS for Assitance data IE |
| 152 | ReferenceAssistData ::= SEQUENCE { |
| 153 | bcchCarrier BCCHCarrier, -- BCCH carrier |
| 154 | bsic BSIC, -- BSIC |
| 155 | timeSlotScheme TimeSlotScheme, -- Timeslot scheme |
| 156 | btsPosition BTSPosition OPTIONAL |
| 157 | } |
| 158 | |
| 159 | -- ellipsoid point and |
| 160 | -- ellipsoid point with altitude and uncertainty ellipsoid shapes are supported |
| 161 | BTSPosition ::= Ext-GeographicalInformation |
| 162 | |
| 163 | -- RF channel number of BCCH |
| 164 | BCCHCarrier ::= INTEGER (0..1023) |
| 165 | |
| 166 | -- Base station Identity Code |
| 167 | BSIC ::= INTEGER (0..63) |
| 168 | |
| 169 | -- Timeslot scheme |
| 170 | TimeSlotScheme ::= ENUMERATED { |
| 171 | equalLength (0), |
| 172 | variousLength (1) |
| 173 | } |
| 174 | |
| 175 | -- Time slot (modulo) |
| 176 | ModuloTimeSlot ::= INTEGER (0..3) |
| 177 | |
| 178 | -- E-OTD measurement assistance data IE |
| 179 | -- The total number of neighbors in this element (MsrAssistData) |
| 180 | -- and in SystemInfoAssistData element (presented neighbors |
| 181 | -- can be at a maximum 15!) |
| 182 | MsrAssistData ::= SEQUENCE { |
| 183 | msrAssistList SeqOfMsrAssistBTS |
| 184 | } |
| 185 | SeqOfMsrAssistBTS ::= SEQUENCE (SIZE(1..15)) OF MsrAssistBTS |
| 186 | |
| 187 | MsrAssistBTS ::= SEQUENCE { |
| 188 | bcchCarrier BCCHCarrier, -- BCCH carrier |
| 189 | bsic BSIC, -- BSIC |
| 190 | multiFrameOffset MultiFrameOffset, -- multiframe offset |
| 191 | timeSlotScheme TimeSlotScheme, -- Timeslot scheme |
| 192 | roughRTD RoughRTD, -- rough RTD value |
| 193 | |
| 194 | -- Location Calculation Assistance data is moved here |
| 195 | calcAssistanceBTS CalcAssistanceBTS OPTIONAL |
| 196 | } |
| 197 | |
| 198 | -- Multiframe offset |
| 199 | MultiFrameOffset ::= INTEGER (0..51) |
| 200 | -- The Multiframe Offset value 51 shall not be encoded by the transmitting entity and |
| 201 | -- shall be treated by the receiving entity as 0. |
| 202 | |
| 203 | -- Rough RTD value between one base station and reference BTS |
| 204 | RoughRTD ::= INTEGER (0..1250) |
| 205 | -- The RoughRTD value 1250 shall not be encoded by the transmitting entity and shall |
| 206 | -- be treated by the receiving entity as 0. |
| 207 | |
| 208 | -- E-OTD Measurement assistance data for system information List IE |
| 209 | -- The total number of base stations in this element (SystemInfoAssistData |
| 210 | -- presented neighbors) and in MsrAssistData element can be at a maximum 15. |
| 211 | SystemInfoAssistData ::= SEQUENCE { |
| 212 | systemInfoAssistList SeqOfSystemInfoAssistBTS |
| 213 | } |
| 214 | SeqOfSystemInfoAssistBTS::= SEQUENCE (SIZE(1..32)) OF SystemInfoAssistBTS |
| 215 | |
| 216 | -- whether n.th is present or not ? |
| 217 | SystemInfoAssistBTS ::= CHOICE { |
| 218 | notPresent NULL, |
| 219 | present AssistBTSData |
| 220 | } |
| 221 | |
| 222 | -- Actual assistance data for system information base station |
| 223 | AssistBTSData ::= SEQUENCE { |
| 224 | bsic BSIC, -- BSIC |
| 225 | multiFrameOffset MultiFrameOffset, -- multiframe offset |
| 226 | timeSlotScheme TimeSlotScheme, -- Timeslot scheme |
| 227 | roughRTD RoughRTD, -- rough RTD value |
| 228 | |
| 229 | -- Location Calculation Assistance data |
| 230 | calcAssistanceBTS CalcAssistanceBTS OPTIONAL |
| 231 | } |
| 232 | |
| 233 | -- E-OTD Location calculation assistance data, |
| 234 | -- CalcAssistanceBTS element is optional not subfields |
| 235 | CalcAssistanceBTS ::= SEQUENCE { |
| 236 | fineRTD FineRTD, -- fine RTD value between base stations |
| 237 | referenceWGS84 ReferenceWGS84 -- reference coordinates |
| 238 | } |
| 239 | |
| 240 | -- Coordinates of neighbour BTS, WGS-84 ellipsoid |
| 241 | ReferenceWGS84 ::= SEQUENCE { |
| 242 | relativeNorth RelDistance, -- relative distance (south negative) |
| 243 | relativeEast RelDistance, -- relative distance (west negative) |
| 244 | -- Relative Altitude is not always known |
| 245 | relativeAlt RelativeAlt OPTIONAL -- relative altitude |
| 246 | } |
| 247 | |
| 248 | -- Fine RTD value between this BTS and the reference BTS |
| 249 | FineRTD ::= INTEGER (0..255) |
| 250 | |
| 251 | -- Relative north/east distance |
| 252 | RelDistance ::= INTEGER (-200000..200000) |
| 253 | |
| 254 | -- Relative altitude |
| 255 | RelativeAlt ::= INTEGER (-4000..4000) |
| 256 | |
| 257 | -- Measure position response IEs |
| 258 | -- Reference Identity |
| 259 | -- Multiple sets |
| 260 | MultipleSets ::= SEQUENCE { |
| 261 | -- number of reference sets |
| 262 | nbrOfSets INTEGER (2..3), |
| 263 | |
| 264 | -- This field actually tells the number of reference BTSs |
| 265 | nbrOfReferenceBTSs INTEGER (1..3), |
| 266 | |
| 267 | -- This field is conditional and included optionally only if |
| 268 | -- nbrOfSets is 3 and number of reference BTSs is 2. |
| 269 | referenceRelation ReferenceRelation OPTIONAL |
| 270 | } |
| 271 | |
| 272 | -- Relation between refence BTSs and sets |
| 273 | ReferenceRelation ::= ENUMERATED { |
| 274 | secondBTSThirdSet (0), -- 1st BTS related to 1st and 2nd sets |
| 275 | secondBTSSecondSet (1), -- 1st BTS related to 1st and 3rd sets |
| 276 | firstBTSFirstSet (2) -- 1st BTS related to 1st set |
| 277 | } |
| 278 | |
| 279 | -- Reference BTS Identity, this element contains number of |
| 280 | -- BTSs told nbrOfReferenceBTSs field in Multiple sets element) |
| 281 | ReferenceIdentity ::= SEQUENCE { |
| 282 | -- Reference BTS list |
| 283 | refBTSList SeqOfReferenceIdentityType |
| 284 | } |
| 285 | SeqOfReferenceIdentityType ::= SEQUENCE (SIZE(1..3)) OF ReferenceIdentityType |
| 286 | |
| 287 | -- Cell identity |
| 288 | ReferenceIdentityType ::= CHOICE { |
| 289 | bsicAndCarrier BSICAndCarrier, -- BSIC and Carrier |
| 290 | ci CellID, -- Cell ID, LAC not needed |
| 291 | requestIndex RequestIndex, -- Index to Requested Neighbor List |
| 292 | systemInfoIndex SystemInfoIndex, -- Index to System info list, this type of ref. identity |
| 293 | -- shall not be used by the MS unless it has received |
| 294 | -- the SystemInfoAssistData from the SMLC for this cell. |
| 295 | ciAndLAC CellIDAndLAC -- CI and LAC |
| 296 | } |
| 297 | |
| 298 | BSICAndCarrier ::= SEQUENCE { |
| 299 | carrier BCCHCarrier, |
| 300 | bsic BSIC |
| 301 | } |
| 302 | |
| 303 | RequestIndex ::= INTEGER (1..16) |
| 304 | |
| 305 | SystemInfoIndex ::= INTEGER (1..32) |
| 306 | |
| 307 | CellIDAndLAC ::= SEQUENCE { |
| 308 | referenceLAC LACID, -- Location area code |
| 309 | referenceCI CellID -- Cell identity |
| 310 | } |
| 311 | CellID ::= INTEGER (0..65535) |
| 312 | LACID ::= INTEGER (0..65535) |
| 313 | |
| 314 | -- OTD-MeasureInfo |
| 315 | OTD-MeasureInfo ::= SEQUENCE { |
| 316 | -- Measurement info elements, OTD-MsrElement is repeated number of times |
| 317 | -- told in nbrOfReferenceBTSs in MultipleSets, default value is 1 |
| 318 | otdMsrFirstSets OTD-MsrElementFirst, |
| 319 | |
| 320 | -- if more than one sets are present this element is repeated |
| 321 | -- NumberOfSets - 1 (-1 = first set) |
| 322 | otdMsrRestSets SeqOfOTD-MsrElementRest OPTIONAL |
| 323 | } |
| 324 | |
| 325 | SeqOfOTD-MsrElementRest ::= SEQUENCE (SIZE(1..2)) OF OTD-MsrElementRest |
| 326 | |
| 327 | -- OTD measurent information for 1 set |
| 328 | OTD-MsrElementFirst ::= SEQUENCE { |
| 329 | refFrameNumber INTEGER (0..42431), -- Frame number modulo 42432 |
| 330 | referenceTimeSlot ModuloTimeSlot, |
| 331 | toaMeasurementsOfRef TOA-MeasurementsOfRef OPTIONAL, |
| 332 | stdResolution StdResolution, |
| 333 | taCorrection INTEGER (0..960) OPTIONAL, -- TA correction |
| 334 | |
| 335 | -- measured neighbors in OTD measurements |
| 336 | otd-FirstSetMsrs SeqOfOTD-FirstSetMsrs OPTIONAL |
| 337 | } |
| 338 | SeqOfOTD-FirstSetMsrs ::= SEQUENCE (SIZE(1..10)) OF OTD-FirstSetMsrs |
| 339 | |
| 340 | -- OTD measurent information 2 and 3 sets if exist |
| 341 | OTD-MsrElementRest ::= SEQUENCE { |
| 342 | refFrameNumber INTEGER (0..42431), -- Frame number modulo 42432 |
| 343 | referenceTimeSlot ModuloTimeSlot, |
| 344 | toaMeasurementsOfRef TOA-MeasurementsOfRef OPTIONAL, |
| 345 | stdResolution StdResolution, |
| 346 | taCorrection INTEGER (0..960) OPTIONAL, -- TA correction |
| 347 | |
| 348 | -- measured neighbors in OTD measurements |
| 349 | otd-MsrsOfOtherSets SeqOfOTD-MsrsOfOtherSets OPTIONAL |
| 350 | } |
| 351 | SeqOfOTD-MsrsOfOtherSets ::= SEQUENCE (SIZE(1..10)) OF OTD-MsrsOfOtherSets |
| 352 | |
| 353 | -- Standard deviation of the TOA measurements from the reference BTS |
| 354 | TOA-MeasurementsOfRef ::= SEQUENCE { |
| 355 | refQuality RefQuality, |
| 356 | numOfMeasurements NumOfMeasurements |
| 357 | } |
| 358 | |
| 359 | RefQuality ::= INTEGER (0..31) -- St Dev of TOA of reference as defined in annex |
| 360 | NumOfMeasurements ::= INTEGER (0..7) -- No. of measurements for RefQuality as defined in annex |
| 361 | StdResolution ::= INTEGER (0..3) -- Values of resolution are defined in annex |
| 362 | |
| 363 | OTD-FirstSetMsrs ::= OTD-MeasurementWithID |
| 364 | |
| 365 | -- Neighbour info in OTD measurements 0-10 times in TD measurement info |
| 366 | OTD-MsrsOfOtherSets ::= CHOICE { |
| 367 | identityNotPresent OTD-Measurement, |
| 368 | identityPresent OTD-MeasurementWithID |
| 369 | } |
| 370 | |
| 371 | -- For this OTD measurement identity is same as the identity of BTS |
| 372 | -- in the first set with same sequence number |
| 373 | OTD-Measurement ::= SEQUENCE { |
| 374 | nborTimeSlot ModuloTimeSlot, |
| 375 | eotdQuality EOTDQuality, |
| 376 | otdValue OTDValue |
| 377 | } |
| 378 | |
| 379 | -- This measurement contains the BTS identity and measurement |
| 380 | OTD-MeasurementWithID ::=SEQUENCE { |
| 381 | neighborIdentity NeighborIdentity, |
| 382 | nborTimeSlot ModuloTimeSlot, |
| 383 | eotdQuality EOTDQuality, |
| 384 | otdValue OTDValue |
| 385 | } |
| 386 | |
| 387 | EOTDQuality ::= SEQUENCE { |
| 388 | nbrOfMeasurements INTEGER (0..7), |
| 389 | stdOfEOTD INTEGER (0..31) |
| 390 | } |
| 391 | |
| 392 | NeighborIdentity ::= CHOICE { |
| 393 | bsicAndCarrier BSICAndCarrier, -- BSIC and Carrier |
| 394 | ci CellID, -- Cell ID, LAC not needed |
| 395 | multiFrameCarrier MultiFrameCarrier, -- MultiFrameOffest and BSIC |
| 396 | requestIndex RequestIndex, -- Index to Requested Neighbor List |
| 397 | systemInfoIndex SystemInfoIndex, -- Index to System info list, this type of neighbour |
| 398 | -- identity shall not be used by the MS unless it has |
| 399 | -- received the SystemInfoAssistData from the SMLC for |
| 400 | -- this cell. |
| 401 | ciAndLAC CellIDAndLAC -- CI and LAC |
| 402 | } |
| 403 | |
| 404 | -- Multiframe and carrier |
| 405 | MultiFrameCarrier ::= SEQUENCE { |
| 406 | bcchCarrier BCCHCarrier, |
| 407 | multiFrameOffset MultiFrameOffset |
| 408 | } |
| 409 | |
| 410 | -- OTD measurement value for neighbour |
| 411 | OTDValue ::= INTEGER (0..39999) |
| 412 | |
| 413 | -- Location information IE |
| 414 | LocationInfo ::= SEQUENCE { |
| 415 | refFrame INTEGER (0..65535), -- Reference Frame number |
| 416 | -- If refFrame is within (42432..65535), it shall be ignored by the receiver |
| 417 | -- in that case the MS should provide GPS TOW if available |
| 418 | gpsTOW INTEGER (0..14399999) OPTIONAL, -- GPS TOW |
| 419 | fixType FixType, |
| 420 | -- Note that applicable range for refFrame is 0 - 42431 |
| 421 | -- Possible shapes carried in posEstimate are |
| 422 | -- ellipsoid point, |
| 423 | -- ellipsoid point with uncertainty circle |
| 424 | -- ellipsoid point with uncertainty ellipse |
| 425 | -- ellipsoid point with altitude and uncertainty ellipsoid |
| 426 | posEstimate Ext-GeographicalInformation |
| 427 | } |
| 428 | |
| 429 | FixType ::= INTEGER { |
| 430 | twoDFix (0), |
| 431 | threeDFix (1) |
| 432 | } (0..1) |
| 433 | |
| 434 | -- GPS-Measurement information |
| 435 | GPS-MeasureInfo ::= SEQUENCE { |
| 436 | -- Measurement info elements |
| 437 | -- user has to make sure that in this element is number of elements |
| 438 | -- defined in reference BTS identity |
| 439 | gpsMsrSetList SeqOfGPS-MsrSetElement |
| 440 | } |
| 441 | SeqOfGPS-MsrSetElement ::= SEQUENCE (SIZE(1..3)) OF GPS-MsrSetElement |
| 442 | |
| 443 | -- OTD measurent information 1-3 times in message |
| 444 | GPS-MsrSetElement ::= SEQUENCE { |
| 445 | refFrame INTEGER (0..65535) OPTIONAL, -- Reference Frame number |
| 446 | gpsTOW GPSTOW24b, -- GPS TOW |
| 447 | -- Note that applicable range for refFrame is 0 - 42431 |
| 448 | |
| 449 | --N_SAT can be read from number of elements of gps-msrList |
| 450 | |
| 451 | gps-msrList SeqOfGPS-MsrElement |
| 452 | } |
| 453 | |
| 454 | -- 24 bit presentation for GPSTOW |
| 455 | GPSTOW24b ::= INTEGER (0..14399999) |
| 456 | |
| 457 | -- measured elements in measurement parameters field |
| 458 | SeqOfGPS-MsrElement ::= SEQUENCE (SIZE(1..16)) OF GPS-MsrElement |
| 459 | |
| 460 | GPS-MsrElement ::= SEQUENCE { |
| 461 | satelliteID SatelliteID, -- Satellite identifier |
| 462 | cNo INTEGER (0..63), -- carrier noise ratio |
| 463 | doppler INTEGER (-32768..32767), -- doppler, mulltiply by 0.2 |
| 464 | wholeChips INTEGER (0..1022), -- whole value of the code phase measurement |
| 465 | fracChips INTEGER (0..1024), -- fractional value of the code phase measurement |
| 466 | -- a value of 1024 shall not be encoded by the sender |
| 467 | -- the receiver shall consider a value of 1024 to be |
| 468 | -- invalid data |
| 469 | mpathIndic MpathIndic, -- multipath indicator |
| 470 | pseuRangeRMSErr INTEGER (0..63) -- index |
| 471 | } |
| 472 | |
| 473 | -- Multipath indicator |
| 474 | MpathIndic ::= ENUMERATED { |
| 475 | notMeasured (0), |
| 476 | low (1), |
| 477 | medium (2), |
| 478 | high (3) |
| 479 | } |
| 480 | |
| 481 | -- Location error IE |
| 482 | LocationError ::= SEQUENCE { |
| 483 | locErrorReason LocErrorReason, |
| 484 | additionalAssistanceData AdditionalAssistanceData OPTIONAL, |
| 485 | ... |
| 486 | } |
| 487 | |
| 488 | LocErrorReason ::= ENUMERATED { |
| 489 | unDefined (0), |
| 490 | notEnoughBTSs (1), |
| 491 | notEnoughSats (2), |
| 492 | eotdLocCalAssDataMissing (3), |
| 493 | eotdAssDataMissing (4), |
| 494 | gpsLocCalAssDataMissing (5), |
| 495 | gpsAssDataMissing (6), |
| 496 | methodNotSupported (7), |
| 497 | notProcessed (8), |
| 498 | refBTSForGPSNotServingBTS (9), |
| 499 | refBTSForEOTDNotServingBTS (10), |
| 500 | ..., |
| 501 | notEnoughGANSSSats (11), |
| 502 | ganssAssDataMissing (12), |
| 503 | refBTSForGANSSNotServingBTS (13) |
| 504 | } |
| 505 | |
| 506 | -- exception handling: |
| 507 | -- an unrecognized value shall be treated the same as value 0 |
| 508 | |
| 509 | |
| 510 | -- defines additional assistance data needed for any new location attempt |
| 511 | -- MS shall retain any assistance data already received |
| 512 | AdditionalAssistanceData ::= SEQUENCE { |
| 513 | gpsAssistanceData GPSAssistanceData OPTIONAL, |
| 514 | extensionContainer ExtensionContainer OPTIONAL, |
| 515 | ..., |
| 516 | ganssAssistanceData GANSSAssistanceData OPTIONAL |
| 517 | } |
| 518 | |
| 519 | GPSAssistanceData ::= OCTET STRING (SIZE (1..maxGPSAssistanceData)) |
| 520 | -- GPSAssistanceData has identical structure and encoding to octets 3 to n of the |
| 521 | -- GPS Assistance Data IE in 3GPP TS 49.031 |
| 522 | |
| 523 | maxGPSAssistanceData INTEGER ::= 40 |
| 524 | |
| 525 | GANSSAssistanceData ::= OCTET STRING (SIZE (1..maxGANSSAssistanceData)) |
| 526 | -- GANSSAssistanceData has identical structure and encoding to octets 3 to n of the |
| 527 | -- GANSS Assistance Data IE in 3GPP TS 49.031 |
| 528 | |
| 529 | maxGANSSAssistanceData INTEGER ::= 40 |
| 530 | |
| 531 | |
| 532 | -- Protocol Error Causes |
| 533 | ErrorCodes ::= ENUMERATED { |
| 534 | unDefined (0), |
| 535 | missingComponet (1), |
| 536 | incorrectData (2), |
| 537 | missingIEorComponentElement (3), |
| 538 | messageTooShort (4), |
| 539 | unknowReferenceNumber (5), |
| 540 | ... |
| 541 | } |
| 542 | |
| 543 | -- exception handling: |
| 544 | -- an unrecognized value shall be treated the same as value 0 |
| 545 | |
| 546 | -- GPS assistance data IE |
| 547 | GPS-AssistData ::= SEQUENCE { |
| 548 | controlHeader ControlHeader |
| 549 | } |
| 550 | |
| 551 | -- More Assistance Data To Be Sent IE |
| 552 | -- More Assistance Data Components On the Way indication for delivery of an entire set of assistance |
| 553 | -- data in multiple Assistance Data components. |
| 554 | |
| 555 | MoreAssDataToBeSent ::= ENUMERATED { |
| 556 | noMoreMessages (0), -- This is the only or last Assistance Data message used to deliver |
| 557 | -- the entire set of assistance data. |
| 558 | moreMessagesOnTheWay (1) -- The SMLC will send more Assistance Data messages or a final RRLP |
| 559 | -- Measure Position Request message to deliver the |
| 560 | -- the entire set of assistance data. |
| 561 | } |
| 562 | |
| 563 | -- Control header of the GPS assistance data |
| 564 | ControlHeader ::= SEQUENCE { |
| 565 | |
| 566 | -- Field type Present information |
| 567 | referenceTime ReferenceTime OPTIONAL, |
| 568 | refLocation RefLocation OPTIONAL, |
| 569 | dgpsCorrections DGPSCorrections OPTIONAL, |
| 570 | navigationModel NavigationModel OPTIONAL, |
| 571 | ionosphericModel IonosphericModel OPTIONAL, |
| 572 | utcModel UTCModel OPTIONAL, |
| 573 | almanac Almanac OPTIONAL, |
| 574 | acquisAssist AcquisAssist OPTIONAL, |
| 575 | realTimeIntegrity SeqOf-BadSatelliteSet OPTIONAL |
| 576 | } |
| 577 | |
| 578 | ReferenceTime ::= SEQUENCE { |
| 579 | gpsTime GPSTime, |
| 580 | gsmTime GSMTime OPTIONAL, |
| 581 | gpsTowAssist GPSTOWAssist OPTIONAL |
| 582 | } |
| 583 | |
| 584 | -- GPS Time includes week number and time-of-week (TOW) |
| 585 | GPSTime ::= SEQUENCE { |
| 586 | gpsTOW23b GPSTOW23b, |
| 587 | gpsWeek GPSWeek |
| 588 | } |
| 589 | |
| 590 | -- GPSTOW, range 0-604799.92, resolution 0.08 sec, 23-bit presentation |
| 591 | GPSTOW23b ::= INTEGER (0..7559999) |
| 592 | |
| 593 | -- GPS week number |
| 594 | GPSWeek ::= INTEGER (0..1023) |
| 595 | |
| 596 | -- GPSTOWAssist consists of TLM message, Anti-spoof flag, Alert flag, and 2 reserved bits in TLM Word |
| 597 | -- for each visible satellite. |
| 598 | -- N_SAT can be read from number of elements in GPSTOWAssist |
| 599 | GPSTOWAssist ::= SEQUENCE (SIZE(1..12)) OF GPSTOWAssistElement |
| 600 | |
| 601 | GPSTOWAssistElement ::= SEQUENCE { |
| 602 | satelliteID SatelliteID, |
| 603 | tlmWord TLMWord, |
| 604 | antiSpoof AntiSpoofFlag, |
| 605 | alert AlertFlag, |
| 606 | tlmRsvdBits TLMReservedBits |
| 607 | } |
| 608 | |
| 609 | -- TLM Word, 14 bits |
| 610 | TLMWord ::= INTEGER (0..16383) |
| 611 | |
| 612 | -- Anti-Spoof flag |
| 613 | AntiSpoofFlag ::= INTEGER (0..1) |
| 614 | |
| 615 | -- Alert flag |
| 616 | AlertFlag ::= INTEGER (0..1) |
| 617 | |
| 618 | -- Reserved bits in TLM word, MSB occurs earlier in TLM Word transmitted by satellite |
| 619 | TLMReservedBits ::= INTEGER (0..3) |
| 620 | |
| 621 | GSMTime ::= SEQUENCE { |
| 622 | bcchCarrier BCCHCarrier, -- BCCH carrier |
| 623 | bsic BSIC, -- BSIC |
| 624 | frameNumber FrameNumber, |
| 625 | timeSlot TimeSlot, |
| 626 | bitNumber BitNumber |
| 627 | } |
| 628 | |
| 629 | -- Frame number |
| 630 | FrameNumber ::= INTEGER (0..2097151) |
| 631 | |
| 632 | -- Time slot number |
| 633 | TimeSlot ::= INTEGER (0..7) |
| 634 | |
| 635 | -- Bit number |
| 636 | BitNumber ::= INTEGER (0..156) |
| 637 | |
| 638 | |
| 639 | -- Reference Location IE |
| 640 | RefLocation ::= SEQUENCE { |
| 641 | threeDLocation Ext-GeographicalInformation |
| 642 | } |
| 643 | |
| 644 | -- DGPS Corrections IE |
| 645 | DGPSCorrections ::= SEQUENCE { |
| 646 | |
| 647 | gpsTOW INTEGER (0..604799), -- DGPS reference time |
| 648 | status INTEGER (0..7), |
| 649 | -- N_SAT can be read from number of elements of satList |
| 650 | satList SeqOfSatElement |
| 651 | } |
| 652 | SeqOfSatElement ::= SEQUENCE (SIZE (1..16)) OF SatElement |
| 653 | |
| 654 | -- number of correction for satellites |
| 655 | SatElement ::= SEQUENCE { |
| 656 | satelliteID SatelliteID, |
| 657 | |
| 658 | |
| 659 | --- Sequence number for ephemeris |
| 660 | iode INTEGER (0..239), |
| 661 | -- User Differential Range Error |
| 662 | udre INTEGER (0..3), |
| 663 | |
| 664 | -- Pseudo Range Correction, range is |
| 665 | -- -655.04 - +655.04, |
| 666 | pseudoRangeCor INTEGER (-2047..2047), |
| 667 | |
| 668 | -- Pseudo Range Rate Correction, range is |
| 669 | -- -4.064 - +4.064, |
| 670 | rangeRateCor INTEGER (-127..127), |
| 671 | |
| 672 | -- Delta Pseudo Range Correction 2 |
| 673 | deltaPseudoRangeCor2 INTEGER (-127..127), -- This IE shall be ignored by the receiver and |
| 674 | -- set to zero by the sender |
| 675 | -- Delta Pseudo Range Correction 2 |
| 676 | deltaRangeRateCor2 INTEGER (-7..7), -- This IE shall be ignored by the receiver and |
| 677 | -- set to zero by the sender |
| 678 | -- Delta Pseudo Range Correction 3 |
| 679 | deltaPseudoRangeCor3 INTEGER (-127..127), -- This IE shall be ignored by the receiver and |
| 680 | -- set to zero by the sender |
| 681 | -- Delta Pseudo Range Correction 3 |
| 682 | deltaRangeRateCor3 INTEGER (-7..7) -- This IE shall be ignored by the receiver and |
| 683 | -- set to zero by the sender |
| 684 | } |
| 685 | |
| 686 | SatelliteID ::= INTEGER (0..63) -- identifies satellite |
| 687 | |
| 688 | -- Navigation Model IE |
| 689 | NavigationModel ::= SEQUENCE { |
| 690 | navModelList SeqOfNavModelElement |
| 691 | } |
| 692 | |
| 693 | -- navigation model satellite list |
| 694 | SeqOfNavModelElement ::= SEQUENCE (SIZE(1..16)) OF NavModelElement |
| 695 | |
| 696 | NavModelElement ::= SEQUENCE { |
| 697 | satelliteID SatelliteID, |
| 698 | satStatus SatStatus -- satellite status |
| 699 | } |
| 700 | |
| 701 | -- the Status of the navigation model |
| 702 | SatStatus ::= CHOICE { |
| 703 | -- New satellite, new Navigation Model |
| 704 | newSatelliteAndModelUC UncompressedEphemeris, |
| 705 | |
| 706 | -- Existing satellite, Existing Navigation Model |
| 707 | oldSatelliteAndModel NULL, |
| 708 | |
| 709 | -- Existing satellite, new Navigation Model |
| 710 | newNaviModelUC UncompressedEphemeris, |
| 711 | ... |
| 712 | } |
| 713 | |
| 714 | -- Uncompressed satellite emhemeris and clock corrections |
| 715 | UncompressedEphemeris ::= SEQUENCE { |
| 716 | ephemCodeOnL2 INTEGER (0..3), |
| 717 | ephemURA INTEGER (0..15), |
| 718 | ephemSVhealth INTEGER (0..63), |
| 719 | ephemIODC INTEGER (0..1023), |
| 720 | ephemL2Pflag INTEGER (0..1), |
| 721 | ephemSF1Rsvd EphemerisSubframe1Reserved, |
| 722 | ephemTgd INTEGER (-128..127), |
| 723 | ephemToc INTEGER (0..37799), |
| 724 | ephemAF2 INTEGER (-128..127), |
| 725 | ephemAF1 INTEGER (-32768..32767), |
| 726 | ephemAF0 INTEGER (-2097152..2097151), |
| 727 | ephemCrs INTEGER (-32768..32767), |
| 728 | ephemDeltaN INTEGER (-32768..32767), |
| 729 | ephemM0 INTEGER (-2147483648..2147483647), |
| 730 | ephemCuc INTEGER (-32768..32767), |
| 731 | ephemE INTEGER (0..4294967295), |
| 732 | ephemCus INTEGER (-32768..32767), |
| 733 | ephemAPowerHalf INTEGER (0..4294967295), |
| 734 | ephemToe INTEGER (0..37799), |
| 735 | ephemFitFlag INTEGER (0..1), |
| 736 | ephemAODA INTEGER (0..31), |
| 737 | ephemCic INTEGER (-32768..32767), |
| 738 | ephemOmegaA0 INTEGER (-2147483648..2147483647), |
| 739 | ephemCis INTEGER (-32768..32767), |
| 740 | ephemI0 INTEGER (-2147483648..2147483647), |
| 741 | ephemCrc INTEGER (-32768..32767), |
| 742 | ephemW INTEGER (-2147483648..2147483647), |
| 743 | ephemOmegaADot INTEGER (-8388608..8388607), |
| 744 | ephemIDot INTEGER (-8192..8191) |
| 745 | } |
| 746 | |
| 747 | -- Reserved bits in subframe 1 of navigation message |
| 748 | EphemerisSubframe1Reserved ::= SEQUENCE { |
| 749 | reserved1 INTEGER (0..8388607), -- 23-bit field |
| 750 | reserved2 INTEGER (0..16777215), -- 24-bit field |
| 751 | reserved3 INTEGER (0..16777215), -- 24-bit field |
| 752 | reserved4 INTEGER (0..65535) -- 16-bit field |
| 753 | } |
| 754 | |
| 755 | -- Ionospheric Model IE |
| 756 | IonosphericModel ::= SEQUENCE { |
| 757 | alfa0 INTEGER (-128..127), |
| 758 | alfa1 INTEGER (-128..127), |
| 759 | alfa2 INTEGER (-128..127), |
| 760 | alfa3 INTEGER (-128..127), |
| 761 | beta0 INTEGER (-128..127), |
| 762 | beta1 INTEGER (-128..127), |
| 763 | beta2 INTEGER (-128..127), |
| 764 | beta3 INTEGER (-128..127) |
| 765 | } |
| 766 | |
| 767 | -- Universal Time Coordinate Model |
| 768 | UTCModel ::= SEQUENCE { |
| 769 | utcA1 INTEGER (-8388608..8388607), |
| 770 | utcA0 INTEGER (-2147483648..2147483647), |
| 771 | utcTot INTEGER (0..255), |
| 772 | utcWNt INTEGER (0..255), |
| 773 | utcDeltaTls INTEGER (-128..127), |
| 774 | utcWNlsf INTEGER (0..255), |
| 775 | utcDN INTEGER (-128..127), |
| 776 | utcDeltaTlsf INTEGER (-128..127) |
| 777 | } |
| 778 | |
| 779 | -- Almanac, Long term model |
| 780 | -- NOTE: These are parameters are subset of the ephemeris |
| 781 | -- NOTE: But with reduced resolution and accuracy |
| 782 | Almanac ::= SEQUENCE { |
| 783 | alamanacWNa INTEGER (0..255), -- Once per message |
| 784 | |
| 785 | -- navigation model satellite list. |
| 786 | -- The size of almanacList is actually Nums_Sats_Total field |
| 787 | almanacList SeqOfAlmanacElement |
| 788 | } |
| 789 | SeqOfAlmanacElement ::= SEQUENCE (SIZE(1..64)) OF AlmanacElement |
| 790 | |
| 791 | -- Almanac info once per satellite |
| 792 | AlmanacElement ::= SEQUENCE { |
| 793 | satelliteID SatelliteID, |
| 794 | almanacE INTEGER (0..65535), |
| 795 | alamanacToa INTEGER (0..255), |
| 796 | almanacKsii INTEGER (-32768..32767), |
| 797 | almanacOmegaDot INTEGER (-32768..32767), |
| 798 | almanacSVhealth INTEGER (0..255), |
| 799 | almanacAPowerHalf INTEGER (0..16777215), |
| 800 | almanacOmega0 INTEGER (-8388608..8388607), |
| 801 | almanacW INTEGER (-8388608..8388607), |
| 802 | almanacM0 INTEGER (-8388608..8388607), |
| 803 | almanacAF0 INTEGER (-1024..1023), |
| 804 | almanacAF1 INTEGER (-1024..1023) |
| 805 | } |
| 806 | |
| 807 | -- Acquisition Assistance |
| 808 | AcquisAssist ::= SEQUENCE { |
| 809 | |
| 810 | -- Number of Satellites can be read from acquistList |
| 811 | timeRelation TimeRelation, |
| 812 | |
| 813 | -- Acquisition assistance list |
| 814 | -- The size of Number of Satellites is actually Number of Satellites field |
| 815 | acquisList SeqOfAcquisElement |
| 816 | } |
| 817 | SeqOfAcquisElement ::= SEQUENCE (SIZE(1..16)) OF AcquisElement |
| 818 | |
| 819 | -- the relationship between GPS time and air-interface timing |
| 820 | TimeRelation ::= SEQUENCE { |
| 821 | -- |
| 822 | gpsTOW GPSTOW23b, -- 23b presentation |
| 823 | gsmTime GSMTime OPTIONAL |
| 824 | } |
| 825 | |
| 826 | -- data occuring per number of satellites |
| 827 | AcquisElement ::= SEQUENCE { |
| 828 | svid SatelliteID, |
| 829 | |
| 830 | -- Doppler 0th order term, |
| 831 | -- -5120.0 - 5117.5 Hz (= -2048 - 2047 with 2.5 Hz resolution) |
| 832 | doppler0 INTEGER (-2048..2047), |
| 833 | addionalDoppler AddionalDopplerFields OPTIONAL, |
| 834 | codePhase INTEGER (0..1022), -- Code Phase |
| 835 | intCodePhase INTEGER (0..19), -- Integer Code Phase |
| 836 | gpsBitNumber INTEGER (0..3), -- GPS bit number |
| 837 | codePhaseSearchWindow INTEGER (0..15), -- Code Phase Search Window |
| 838 | addionalAngle AddionalAngleFields OPTIONAL |
| 839 | } |
| 840 | |
| 841 | AddionalDopplerFields ::= SEQUENCE { |
| 842 | -- Doppler 1st order term, -1.0 - +0.5 Hz/sec |
| 843 | -- (= -42 + (0 to 63) with 1/42 Hz/sec. resolution) |
| 844 | doppler1 INTEGER (0..63), |
| 845 | dopplerUncertainty INTEGER (0..7) |
| 846 | -- a sender shall not encode any DopplerUncertainty value in the range 5 to 7 |
| 847 | -- a receiver shall ignore any value between 5 and 7. |
| 848 | } |
| 849 | |
| 850 | AddionalAngleFields ::= SEQUENCE { |
| 851 | -- azimuth angle, 0 - 348.75 deg (= 0 - 31 with 11.25 deg resolution) |
| 852 | azimuth INTEGER (0..31), |
| 853 | -- elevation angle, 0 - 78.75 deg (= 0 - 7 with 11.25 deg resolution) |
| 854 | elevation INTEGER (0..7) |
| 855 | } |
| 856 | |
| 857 | -- Real-Time Integrity |
| 858 | -- number of bad satellites can be read from this element |
| 859 | SeqOf-BadSatelliteSet ::= SEQUENCE (SIZE(1..16)) OF SatelliteID |
| 860 | |
| 861 | -- Extension Elements |
| 862 | |
| 863 | -- Release 98 Extensions here |
| 864 | Rel98-MsrPosition-Req-Extension ::= SEQUENCE { |
| 865 | rel98-Ext-ExpOTD Rel98-Ext-ExpOTD OPTIONAL, -- ExpectedOTD extension |
| 866 | ..., |
| 867 | gpsTimeAssistanceMeasurementRequest NULL OPTIONAL, |
| 868 | gpsReferenceTimeUncertainty GPSReferenceTimeUncertainty OPTIONAL |
| 869 | |
| 870 | -- Further R98 extensions here |
| 871 | } |
| 872 | Rel98-AssistanceData-Extension ::= SEQUENCE { |
| 873 | rel98-Ext-ExpOTD Rel98-Ext-ExpOTD OPTIONAL, -- ExpectedOTD extension |
| 874 | ..., |
| 875 | gpsTimeAssistanceMeasurementRequest NULL OPTIONAL, |
| 876 | gpsReferenceTimeUncertainty GPSReferenceTimeUncertainty OPTIONAL |
| 877 | |
| 878 | -- Further R98 extensions here |
| 879 | } |
| 880 | |
| 881 | -- Release 98 ExpOTD extension |
| 882 | Rel98-Ext-ExpOTD ::= SEQUENCE { |
| 883 | -- If MsrAssistBTS is included in message, msrAssistData-R98-ExpOTD shall be included. |
| 884 | msrAssistData-R98-ExpOTD MsrAssistData-R98-ExpOTD OPTIONAL, |
| 885 | |
| 886 | -- If SystemInfoAssistaData is included in message, systemInfoAssistData-R98-ExpOTD shall be |
| 887 | -- included. |
| 888 | systemInfoAssistData-R98-ExpOTD SystemInfoAssistData-R98-ExpOTD OPTIONAL |
| 889 | } |
| 890 | |
| 891 | -- MsrAssistData R98 extension |
| 892 | MsrAssistData-R98-ExpOTD ::= SEQUENCE { |
| 893 | msrAssistList-R98-ExpOTD SeqOfMsrAssistBTS-R98-ExpOTD |
| 894 | } |
| 895 | |
| 896 | -- Indexes in SeqOfMsrAssistBTS-R98-ExpOTD refer to SeqOfMsrAssistBTS |
| 897 | -- If the index exceeds the SegOfMsrAssistBTS range or if there is other |
| 898 | -- inconsistencies between the BTS indices, the MS shall apply protocol |
| 899 | -- error cause incorrectData |
| 900 | SeqOfMsrAssistBTS-R98-ExpOTD ::= SEQUENCE (SIZE(1..15)) OF MsrAssistBTS-R98-ExpOTD |
| 901 | |
| 902 | -- This element completes MsrAssistBTS IE |
| 903 | MsrAssistBTS-R98-ExpOTD ::= SEQUENCE { |
| 904 | expectedOTD ExpectedOTD, |
| 905 | expOTDUncertainty ExpOTDUncertainty |
| 906 | } |
| 907 | |
| 908 | -- SystemInfoAssistData R98 extension |
| 909 | SystemInfoAssistData-R98-ExpOTD ::= SEQUENCE { |
| 910 | systemInfoAssistListR98-ExpOTD SeqOfSystemInfoAssistBTS-R98-ExpOTD |
| 911 | } |
| 912 | |
| 913 | -- SeqOfSystemInfoAssistBTS-R98-ExpOTD index refer to SeqOfSystemInfoAssistBTS |
| 914 | -- If the index exceeds the SegOfSystemInfoAssistBTS range or if there is other |
| 915 | -- inconsistencies between the BTS indices, the MS shall apply protocol |
| 916 | -- error cause incorrectData |
| 917 | SeqOfSystemInfoAssistBTS-R98-ExpOTD ::= SEQUENCE (SIZE(1..32)) OF SystemInfoAssistBTS-R98-ExpOTD |
| 918 | |
| 919 | -- whether n.th is present or not ? |
| 920 | SystemInfoAssistBTS-R98-ExpOTD ::= CHOICE { |
| 921 | notPresent NULL, |
| 922 | present AssistBTSData-R98-ExpOTD |
| 923 | } |
| 924 | |
| 925 | -- This element completes AssistBTSData IE |
| 926 | AssistBTSData-R98-ExpOTD ::= SEQUENCE { |
| 927 | expectedOTD ExpectedOTD, |
| 928 | expOTDuncertainty ExpOTDUncertainty -- Uncertainty of expected OTD |
| 929 | } |
| 930 | |
| 931 | -- Expected OTD value between nbor base station and reference BTS |
| 932 | -- at MS's current estimated location. |
| 933 | ExpectedOTD ::= INTEGER (0..1250) |
| 934 | -- The ExpectedOTD value 1250 shall not be encoded by the transmitting entity and |
| 935 | -- shall be treated by the receiving entity as 0. |
| 936 | -- Uncertainty of Exptected OTD in bits |
| 937 | ExpOTDUncertainty ::= INTEGER(0..7) |
| 938 | |
| 939 | -- Release 98 extensions |
| 940 | |
| 941 | GPSReferenceTimeUncertainty ::= INTEGER (0 .. 127) -- Coding according to Annex |
| 942 | |
| 943 | GPSTimeAssistanceMeasurements ::= SEQUENCE { |
| 944 | referenceFrameMSB INTEGER (0 .. 63), -- MSB of frame number |
| 945 | gpsTowSubms INTEGER (0 .. 9999) OPTIONAL, -- in units of 100ns, for MS based AGPS |
| 946 | deltaTow INTEGER (0 .. 127) OPTIONAL, -- for MS assisted AGPS |
| 947 | gpsReferenceTimeUncertainty GPSReferenceTimeUncertainty OPTIONAL |
| 948 | } |
| 949 | |
| 950 | Rel-98-MsrPosition-Rsp-Extension ::= SEQUENCE { |
| 951 | |
| 952 | -- First extension to Release 98 |
| 953 | rel-98-Ext-MeasureInfo SEQUENCE { |
| 954 | otd-MeasureInfo-R98-Ext OTD-MeasureInfo-R98-Ext OPTIONAL |
| 955 | }, |
| 956 | ..., |
| 957 | timeAssistanceMeasurements GPSTimeAssistanceMeasurements OPTIONAL |
| 958 | -- Further R98 extensions here |
| 959 | } |
| 960 | |
| 961 | -- This is an addition to OTD-MeasureInfo element defined in original message, |
| 962 | -- If OTD-MeasureInfo is absent, or if one or more OTD-MsrElementRest are present |
| 963 | -- OTD-MeasureInfo-R98-Ext shall be absent. |
| 964 | -- OTD-MeasureInfo-R98-Ext |
| 965 | OTD-MeasureInfo-R98-Ext ::= SEQUENCE { |
| 966 | -- Measurement info elements |
| 967 | otdMsrFirstSets-R98-Ext OTD-MsrElementFirst-R98-Ext |
| 968 | } |
| 969 | |
| 970 | -- OTD measurement information Ext for the first set only |
| 971 | OTD-MsrElementFirst-R98-Ext ::= SEQUENCE { |
| 972 | -- additional measured neighbors in OTD measurements |
| 973 | otd-FirstSetMsrs-R98-Ext SeqOfOTD-FirstSetMsrs-R98-Ext OPTIONAL |
| 974 | } |
| 975 | SeqOfOTD-FirstSetMsrs-R98-Ext ::= SEQUENCE (SIZE(1..5)) OF OTD-FirstSetMsrs |
| 976 | |
| 977 | Rel-5-MsrPosition-Rsp-Extension ::= SEQUENCE { |
| 978 | |
| 979 | extended-reference Extended-reference OPTIONAL, |
| 980 | -- The extended-reference shall be included by the MS if and only if previously |
| 981 | -- received from the SMLC in a Measure Position Request. When included, the value sent |
| 982 | -- by the MS shall equal the value received from the SMLC. |
| 983 | |
| 984 | -- extension to Release 5, for RRLP pseudo-segmentation here |
| 985 | otd-MeasureInfo-5-Ext OTD-MeasureInfo-5-Ext OPTIONAL, |
| 986 | ulPseudoSegInd UlPseudoSegInd OPTIONAL, -- Included when uplink RRLP |
| 987 | -- Pseudo-segmentation is used, not included when no uplink pseudo-segmentation is used |
| 988 | ... |
| 989 | -- Possibly more extensions for Release 5 here later |
| 990 | } |
| 991 | |
| 992 | Extended-reference ::= SEQUENCE { |
| 993 | smlc-code INTEGER (0..63), |
| 994 | transaction-ID INTEGER (0..262143) |
| 995 | } |
| 996 | |
| 997 | OTD-MeasureInfo-5-Ext ::= SeqOfOTD-MsrElementRest |
| 998 | -- if more than one measurement sets are present this element is repeated |
| 999 | -- NumberOfSets - 1 (-1 = first set) combined in OTD-MeasureInfo-5-Ext and |
| 1000 | -- OTD-MeasureInfo (e.g. if NumberOfSets is 3, then one otdMsrRestSets may |
| 1001 | -- be sent in OTD-MeasureInfo-5-Ext and one in OTD-MeasureInfo) |
| 1002 | |
| 1003 | -- First part of Uplink RRLP Pseudo-segmentation indication, possibly more may be defined |
| 1004 | -- in the future for segmentation with more than two segments. |
| 1005 | UlPseudoSegInd ::= ENUMERATED { |
| 1006 | firstOfMany (0), |
| 1007 | secondOfMany(1) |
| 1008 | } |
| 1009 | |
| 1010 | Rel5-MsrPosition-Req-Extension ::= SEQUENCE { |
| 1011 | extended-reference Extended-reference, |
| 1012 | ... |
| 1013 | -- Possibly more extensions for Release 5 here later |
| 1014 | } |
| 1015 | |
| 1016 | Rel5-AssistanceData-Extension ::= SEQUENCE { |
| 1017 | extended-reference Extended-reference, |
| 1018 | ... |
| 1019 | |
| 1020 | -- Possibly more extensions for Release 5 here later |
| 1021 | } |
| 1022 | |
| 1023 | Rel-5-ProtocolError-Extension::= SEQUENCE { |
| 1024 | extended-reference Extended-reference OPTIONAL, |
| 1025 | -- The extended-reference shall be included by the MS if and only if previously |
| 1026 | -- received from the SMLC. |
| 1027 | -- When included, the value sent by the MS shall equal the value received from the SMLC. |
| 1028 | ... |
| 1029 | |
| 1030 | -- Possibly more extensions for Release 5 here later |
| 1031 | } |
| 1032 | |
| 1033 | -- Release 7 Extensions here |
| 1034 | |
| 1035 | Rel7-MsrPosition-Req-Extension ::= SEQUENCE { |
| 1036 | velocityRequested NULL OPTIONAL, |
| 1037 | ganssPositionMethod GANSSPositioningMethod OPTIONAL, |
| 1038 | ganss-AssistData GANSS-AssistData OPTIONAL, |
| 1039 | ganssCarrierPhaseMeasurementRequest NULL OPTIONAL, |
| 1040 | ganssTODGSMTimeAssociationMeasurementRequest NULL OPTIONAL, |
| 1041 | requiredResponseTime RequiredResponseTime OPTIONAL, |
| 1042 | ... |
| 1043 | -- Further Release 7 extentions here |
| 1044 | } |
| 1045 | |
| 1046 | -- additional satellite systems may be added in future versions of the protocol |
| 1047 | GANSSPositioningMethod ::= BIT STRING { |
| 1048 | gps (0), |
| 1049 | galileo (1)} (SIZE (2..16)) |
| 1050 | |
| 1051 | GANSS-AssistData ::= SEQUENCE { |
| 1052 | ganss-controlHeader GANSS-ControlHeader |
| 1053 | } |
| 1054 | |
| 1055 | GANSS-ControlHeader ::= SEQUENCE { |
| 1056 | ganssCommonAssistData GANSSCommonAssistData OPTIONAL, |
| 1057 | ganssGenericAssistDataList SeqOfGANSSGenericAssistDataElement OPTIONAL |
| 1058 | } |
| 1059 | |
| 1060 | -- GANSS Common Assistance Data Elements |
| 1061 | GANSSCommonAssistData ::= SEQUENCE { |
| 1062 | ganssReferenceTime GANSSReferenceTime OPTIONAL, |
| 1063 | ganssRefLocation GANSSRefLocation OPTIONAL, |
| 1064 | ganssIonosphericModel GANSSIonosphericModel OPTIONAL, |
| 1065 | ... |
| 1066 | } |
| 1067 | |
| 1068 | -- List of GANSS Generic Assistance Data Elements, up to 8 GANSS |
| 1069 | SeqOfGANSSGenericAssistDataElement ::= SEQUENCE (SIZE (1..8)) OF GANSSGenericAssistDataElement |
| 1070 | |
| 1071 | -- GANSS Generic Assistance Data Elements |
| 1072 | GANSSGenericAssistDataElement ::= SEQUENCE { |
| 1073 | ganssID INTEGER (0..7) OPTIONAL, -- Coding according to Annex |
| 1074 | ganssTimeModel SeqOfGANSSTimeModel OPTIONAL, |
| 1075 | ganssDiffCorrections GANSSDiffCorrections OPTIONAL, |
| 1076 | ganssNavigationModel GANSSNavModel OPTIONAL, |
| 1077 | ganssRealTimeIntegrity GANSSRealTimeIntegrity OPTIONAL, |
| 1078 | ganssDataBitAssist GANSSDataBitAssist OPTIONAL, |
| 1079 | ganssRefMeasurementAssist GANSSRefMeasurementAssist OPTIONAL, |
| 1080 | ganssAlmanacModel GANSSAlmanacModel OPTIONAL, |
| 1081 | ganssUTCModel GANSSUTCModel OPTIONAL, |
| 1082 | ... |
| 1083 | } |
| 1084 | |
| 1085 | -- GANSS COMMON ASSISTANCE DATA ELEMENTS |
| 1086 | |
| 1087 | -- GANSS Reference Time IE |
| 1088 | GANSSReferenceTime ::= SEQUENCE { |
| 1089 | ganssRefTimeInfo GANSSRefTimeInfo, |
| 1090 | ganssTOD-GSMTimeAssociation GANSSTOD-GSMTimeAssociation OPTIONAL |
| 1091 | } |
| 1092 | |
| 1093 | -- GANSS Reference Time includes GANSS TOD, GANSS Day, uncertainty |
| 1094 | GANSSRefTimeInfo ::= SEQUENCE { |
| 1095 | ganssDay INTEGER(0 .. 8191) OPTIONAL, |
| 1096 | ganssTOD GANSSTOD, |
| 1097 | ganssTODUncertainty GANSSTODUncertainty OPTIONAL, |
| 1098 | ganssTimeID INTEGER (0 .. 7) OPTIONAL |
| 1099 | } |
| 1100 | |
| 1101 | -- GANSS TOD integer seconds |
| 1102 | GANSSTOD ::= INTEGER (0 .. 86399) |
| 1103 | |
| 1104 | -- GANSS TOD uncertainty |
| 1105 | GANSSTODUncertainty ::= INTEGER (0 .. 127) -- Coding according to Annex |
| 1106 | |
| 1107 | -- GANSS TOD-GSM Time association |
| 1108 | GANSSTOD-GSMTimeAssociation ::= SEQUENCE { |
| 1109 | bcchCarrier BCCHCarrier, -- BCCH carrier |
| 1110 | bsic BSIC, -- BSIC |
| 1111 | frameNumber FrameNumber, |
| 1112 | timeSlot TimeSlot, |
| 1113 | bitNumber BitNumber, |
| 1114 | frameDrift FrameDrift OPTIONAL |
| 1115 | } |
| 1116 | |
| 1117 | -- Frame drift |
| 1118 | FrameDrift ::= INTEGER(-64 .. 63) |
| 1119 | |
| 1120 | -- GANSS Reference Location IE |
| 1121 | GANSSRefLocation ::= SEQUENCE { |
| 1122 | threeDLocation Ext-GeographicalInformation |
| 1123 | } |
| 1124 | |
| 1125 | -- GANSS Ionospheric Model IE |
| 1126 | -- GANSS Ionospheric Model consists of NeQuick model parameters and storm flags |
| 1127 | |
| 1128 | GANSSIonosphericModel ::= SEQUENCE { |
| 1129 | ganssIonoModel GANSSIonosphereModel, |
| 1130 | ganssIonoStormFlags GANSSIonoStormFlags OPTIONAL, |
| 1131 | ... |
| 1132 | } |
| 1133 | |
| 1134 | -- GANSS ionosphere model. Coding according to Annex |
| 1135 | GANSSIonosphereModel ::= SEQUENCE { |
| 1136 | ai0 INTEGER (0 .. 4095), |
| 1137 | ai1 INTEGER (0 .. 4095), |
| 1138 | ai2 INTEGER (0 .. 4095) |
| 1139 | } |
| 1140 | |
| 1141 | -- GANSS ionosphere storm flags |
| 1142 | GANSSIonoStormFlags ::= SEQUENCE { |
| 1143 | ionoStormFlag1 INTEGER (0 .. 1), |
| 1144 | ionoStormFlag2 INTEGER (0 .. 1), |
| 1145 | ionoStormFlag3 INTEGER (0 .. 1), |
| 1146 | ionoStormFlag4 INTEGER (0 .. 1), |
| 1147 | ionoStormFlag5 INTEGER (0 .. 1) |
| 1148 | } |
| 1149 | |
| 1150 | -- GANSS GENERIC ASSISTANCE DATA ELEMENTS |
| 1151 | |
| 1152 | -- GANSS Time Model IE consists of time offset and first and second order parameters to relate GNSS |
| 1153 | -- specific system time to selected time reference |
| 1154 | SeqOfGANSSTimeModel ::= SEQUENCE (SIZE(1..7)) OF GANSSTimeModelElement |
| 1155 | |
| 1156 | GANSSTimeModelElement ::= SEQUENCE { |
| 1157 | ganssTimeModelRefTime INTEGER(0 .. 65535), |
| 1158 | tA0 TA0, |
| 1159 | tA1 TA1 OPTIONAL, |
| 1160 | tA2 TA2 OPTIONAL, |
| 1161 | gnssTOID INTEGER (0 .. 7), |
| 1162 | weekNumber INTEGER (0 .. 8191) OPTIONAL |
| 1163 | } |
| 1164 | |
| 1165 | -- GANSS time model parameter A0 |
| 1166 | TA0 ::= INTEGER (-2147483648 .. 2147483647) |
| 1167 | |
| 1168 | -- GANSS time model parameter A1 |
| 1169 | TA1 ::= INTEGER (-8388608 .. 8388607) |
| 1170 | |
| 1171 | -- GANSS time model parameter A2 |
| 1172 | TA2 ::= INTEGER (-64 .. 63) |
| 1173 | |
| 1174 | -- DGANSS Corrections IE |
| 1175 | GANSSDiffCorrections ::= SEQUENCE { |
| 1176 | dganssRefTime INTEGER (0 .. 119), -- DGANSS reference time |
| 1177 | |
| 1178 | -- N_SGN_TYPE can be read from number of elements of sgnTypeList |
| 1179 | sgnTypeList SeqOfSgnTypeElement |
| 1180 | } |
| 1181 | |
| 1182 | SeqOfSgnTypeElement ::= SEQUENCE (SIZE (1..3)) OF SgnTypeElement -- max three signals per GNSS |
| 1183 | |
| 1184 | -- DGANSS signal type element, once per GNSS signal type included in DGANSS |
| 1185 | SgnTypeElement ::= SEQUENCE { |
| 1186 | ganssSignalID GANSSSignalID OPTIONAL, -- signal type identity |
| 1187 | ganssStatusHealth INTEGER (0 .. 7), |
| 1188 | -- N_SGN can be read from number of elements of dganssSgnList |
| 1189 | dganssSgnList SeqOfDGANSSSgnElement |
| 1190 | } |
| 1191 | |
| 1192 | GANSSSignalID ::= INTEGER (0 .. 3) -- Coding according to Annex |
| 1193 | SeqOfDGANSSSgnElement ::= SEQUENCE (SIZE (1..16)) OF DGANSSSgnElement |
| 1194 | |
| 1195 | -- number of correction for signals |
| 1196 | DGANSSSgnElement ::= SEQUENCE { |
| 1197 | svID SVID, -- Satellite identity |
| 1198 | |
| 1199 | --- Sequence number for GANSS Navigation Model that matches the DGANSS correction set |
| 1200 | iod INTEGER (0 .. 1023), |
| 1201 | |
| 1202 | -- User Differential Range Error |
| 1203 | udre INTEGER (0..3), |
| 1204 | |
| 1205 | -- Pseudo Range Correction, range is |
| 1206 | -- -655.04 - +655.04, |
| 1207 | pseudoRangeCor INTEGER (-2047..2047), |
| 1208 | |
| 1209 | -- Pseudo Range Rate Correction, range is |
| 1210 | -- -4.064 - +4.064, |
| 1211 | rangeRateCor INTEGER (-127..127) |
| 1212 | } |
| 1213 | |
| 1214 | SVID ::= INTEGER (0 .. 63) -- Coding according to Annex |
| 1215 | |
| 1216 | -- GANSS Navigation Model IE |
| 1217 | GANSSNavModel ::= SEQUENCE { |
| 1218 | nonBroadcastIndFlag INTEGER (0 .. 1), |
| 1219 | toeMSB INTEGER (0 .. 31) OPTIONAL, -- 5 MSB of toe and toc |
| 1220 | eMSB INTEGER (0 .. 127) OPTIONAL, |
| 1221 | sqrtAMBS INTEGER (0 .. 63) OPTIONAL, |
| 1222 | ganssSatelliteList SeqOfGANSSSatelliteElement |
| 1223 | } |
| 1224 | |
| 1225 | SeqOfGANSSSatelliteElement ::= SEQUENCE (SIZE(1..32)) OF GANSSSatelliteElement |
| 1226 | |
| 1227 | GANSSSatelliteElement ::= SEQUENCE { |
| 1228 | svID SVID, |
| 1229 | svHealth INTEGER (-7 .. 13), -- Coding according to Annex |
| 1230 | iod INTEGER (0 .. 1023), -- Coding according to Annex |
| 1231 | ganssClockModel GANSSClockModel, |
| 1232 | ganssOrbitModel GANSSOrbitModel, |
| 1233 | ... |
| 1234 | } |
| 1235 | |
| 1236 | -- GANSS orbit model for the GNSS satellite according to the choice |
| 1237 | GANSSOrbitModel ::= CHOICE { |
| 1238 | keplerianSet NavModel-KeplerianSet, |
| 1239 | ... |
| 1240 | } |
| 1241 | |
| 1242 | -- Navigation model in Keplerian parameters |
| 1243 | NavModel-KeplerianSet ::= SEQUENCE { |
| 1244 | keplerToeLSB INTEGER (0 .. 511), -- 9LSB are given in GANSSNavigationModel |
| 1245 | keplerW INTEGER (-2147483648..2147483647), |
| 1246 | keplerDeltaN INTEGER (-32768..32767), |
| 1247 | keplerM0 INTEGER (-2147483648..2147483647), |
| 1248 | keplerOmegaDot INTEGER (-8388608..8388607), |
| 1249 | keplerELSB INTEGER (0..33554431), |
| 1250 | keplerIDot INTEGER (-8192..8191), |
| 1251 | keplerAPowerHalfLSB INTEGER (0.. 67108863), |
| 1252 | keplerI0 INTEGER (-2147483648..2147483647), |
| 1253 | keplerOmega0 INTEGER (-2147483648..2147483647), |
| 1254 | keplerCrs INTEGER (-32768..32767), |
| 1255 | keplerCis INTEGER (-32768..32767), |
| 1256 | keplerCus INTEGER (-32768..32767), |
| 1257 | keplerCrc INTEGER (-32768..32767), |
| 1258 | keplerCic INTEGER (-32768..32767), |
| 1259 | keplerCuc INTEGER (-32768..32767) |
| 1260 | } |
| 1261 | |
| 1262 | -- GANSS clock model for the GNSS satellite according to the choice |
| 1263 | GANSSClockModel ::= CHOICE { |
| 1264 | standardClockModelList SeqOfStandardClockModelElement, |
| 1265 | ... |
| 1266 | } |
| 1267 | |
| 1268 | SeqOfStandardClockModelElement ::= SEQUENCE (SIZE(1..2)) OF StandardClockModelElement |
| 1269 | |
| 1270 | StandardClockModelElement ::= SEQUENCE { |
| 1271 | stanClockTocLSB INTEGER (0 .. 511), -- 9LSB of time of clock |
| 1272 | stanClockAF2 INTEGER (-2048 .. 2047), |
| 1273 | stanClockAF1 INTEGER (-131072 .. 131071), |
| 1274 | stanClockAF0 INTEGER (-134217728 .. 134217727), |
| 1275 | stanClockTgd INTEGER (-512 .. 511) OPTIONAL, |
| 1276 | stanModelID INTEGER (0 .. 1) OPTIONAL, |
| 1277 | ... |
| 1278 | } |
| 1279 | |
| 1280 | -- GANSS Real-Time Integrity IE |
| 1281 | GANSSRealTimeIntegrity ::= SEQUENCE { |
| 1282 | -- list of bad signals |
| 1283 | -- NBS can be read from number of elements in SeqOf-BadSignalSet |
| 1284 | ganssBadSignalList SeqOfBadSignalElement |
| 1285 | } |
| 1286 | |
| 1287 | SeqOfBadSignalElement ::= SEQUENCE (SIZE(1..16)) OF BadSignalElement |
| 1288 | |
| 1289 | BadSignalElement ::= SEQUENCE { |
| 1290 | badSVID SVID, -- Coding according to Annex |
| 1291 | badSignalID INTEGER (0 .. 3) OPTIONAL -- Coding according to Annex |
| 1292 | } |
| 1293 | |
| 1294 | |
| 1295 | -- GANSS Data Bit Assistance IE |
| 1296 | GANSSDataBitAssist ::= SEQUENCE { |
| 1297 | ganssTOD INTEGER (0 .. 59), |
| 1298 | svID SVID, |
| 1299 | ganssDataTypeID INTEGER (0 .. 2), -- Coding according to Annex |
| 1300 | -- list of navigation data bits |
| 1301 | -- N_BIT can be read from number of elements in SeqOf-DataBits |
| 1302 | ganssDataBits SeqOf-GANSSDataBits |
| 1303 | } |
| 1304 | |
| 1305 | SeqOf-GANSSDataBits ::= SEQUENCE (SIZE(1 .. 1024)) OF GANSSDataBit |
| 1306 | GANSSDataBit ::= INTEGER(0 .. 1) |
| 1307 | |
| 1308 | -- GANSS Reference Measurement Assistance IE |
| 1309 | -- Code and Doppler assistance from the network. |
| 1310 | GANSSRefMeasurementAssist ::= SEQUENCE { |
| 1311 | ganssSignalID INTEGER (0 .. 3) OPTIONAL, -- Coding according to Annex |
| 1312 | ganssRefMeasAssitList SeqOfGANSSRefMeasurementElement |
| 1313 | } |
| 1314 | |
| 1315 | SeqOfGANSSRefMeasurementElement ::= SEQUENCE (SIZE(1 .. 16)) OF GANSSRefMeasurementElement |
| 1316 | |
| 1317 | GANSSRefMeasurementElement ::= SEQUENCE { |
| 1318 | svID SVID, |
| 1319 | -- Doppler 0th order term, |
| 1320 | -- -1024 m/s to 1023.5 m/s with 0.5 m/s resolution) |
| 1321 | doppler0 INTEGER (-2048 .. 2047), -- Coding according to Annex |
| 1322 | additionalDoppler AdditionalDopplerFields OPTIONAL, |
| 1323 | codePhase INTEGER (0 .. 1022), -- Code Phase in ms |
| 1324 | intCodePhase INTEGER (0 .. 127), -- Integer Code Phase in ms |
| 1325 | codePhaseSearchWindow INTEGER (0 .. 31), -- Code Phase Search Window, see Annex |
| 1326 | additionalAngle AddionalAngleFields OPTIONAL, |
| 1327 | ... |
| 1328 | } |
| 1329 | |
| 1330 | AdditionalDopplerFields ::= SEQUENCE { |
| 1331 | -- Doppler 1st order term, -0.2 - +0.1 m/s2 |
| 1332 | doppler1 INTEGER (0..63), |
| 1333 | dopplerUncertainty INTEGER (0..4) |
| 1334 | } |
| 1335 | |
| 1336 | -- GANSS Almanac Model IE |
| 1337 | GANSSAlmanacModel ::= SEQUENCE { |
| 1338 | weekNumber INTEGER (0 .. 255), |
| 1339 | svIDMask SVIDMASK, |
| 1340 | toa INTEGER (0 .. 255) OPTIONAL, |
| 1341 | ioda INTEGER (0 .. 3) OPTIONAL, |
| 1342 | ganssAlmanacList SeqOfGANSSAlmanacElement |
| 1343 | } |
| 1344 | |
| 1345 | -- SV ID Mask, LSB for ID 1 and MSB for ID 36 |
| 1346 | SVIDMASK ::= BIT STRING (SIZE (1..36)) |
| 1347 | |
| 1348 | SeqOfGANSSAlmanacElement ::= SEQUENCE (SIZE(1 .. 36)) OF GANSSAlmanacElement |
| 1349 | |
| 1350 | -- GANSS Almanac Model |
| 1351 | GANSSAlmanacElement ::= CHOICE { |
| 1352 | keplerianAlmanacSet Almanac-KeplerianSet, |
| 1353 | ... |
| 1354 | } |
| 1355 | |
| 1356 | -- Almanac parameters according to Keplerian parameters |
| 1357 | Almanac-KeplerianSet ::= SEQUENCE { |
| 1358 | kepAlmanacE INTEGER (0 .. 2047), |
| 1359 | kepAlmanacDeltaI INTEGER (-1024 .. 1023), |
| 1360 | kepAlmanacOmegaDot INTEGER (-1024 .. 1023), |
| 1361 | kepSVHealth INTEGER (0 .. 15), -- Coding according to Annex |
| 1362 | kepAlmanacAPowerHalf INTEGER (-65536 .. 65535), |
| 1363 | kepAlmanacOmega0 INTEGER (-32768 .. 32767), |
| 1364 | kepAlmanacW INTEGER (-32768 .. 32767), |
| 1365 | kepAlmanacM0 INTEGER (-32768 .. 32767), |
| 1366 | kepAlmanacAF0 INTEGER (-8192 .. 8191), |
| 1367 | kepAlmanacAF1 INTEGER (-1024..1023) |
| 1368 | } |
| 1369 | |
| 1370 | -- GANSS Universal Time Coordinate Model |
| 1371 | GANSSUTCModel ::= SEQUENCE { |
| 1372 | ganssUtcA1 INTEGER (-8388608..8388607), |
| 1373 | ganssUtcA0 INTEGER (-2147483648..2147483647), |
| 1374 | ganssUtcTot INTEGER (0..255), |
| 1375 | ganssUtcWNt INTEGER (0..255), |
| 1376 | ganssUtcDeltaTls INTEGER (-128..127), |
| 1377 | ganssUtcWNlsf INTEGER (0..255), |
| 1378 | ganssUtcDN INTEGER (-128..127), |
| 1379 | ganssUtcDeltaTlsf INTEGER (-128..127) |
| 1380 | } |
| 1381 | |
| 1382 | --Required Measurement Request Response Time, range is 1 to 128 seconds. |
| 1383 | RequiredResponseTime ::= INTEGER (1..128) |
| 1384 | |
| 1385 | Rel-7-MsrPosition-Rsp-Extension ::= SEQUENCE { |
| 1386 | |
| 1387 | velEstimate VelocityEstimate OPTIONAL, |
| 1388 | -- Horizontal Velocity |
| 1389 | -- Horizontal with Vertical Velocity |
| 1390 | -- Horizontal Velocity with Uncertainty |
| 1391 | -- Horizontal with Vertical Velocity and Uncertainty |
| 1392 | ganssLocationInfo GANSSLocationInfo OPTIONAL, |
| 1393 | ganssMeasureInfo GANSSMeasureInfo OPTIONAL, |
| 1394 | ... |
| 1395 | -- Further Release 7 extensions here |
| 1396 | } |
| 1397 | |
| 1398 | -- GANSS Location Information contains location estimate, time stamp with uncertainty |
| 1399 | -- and optionally Reference Frame field |
| 1400 | GANSSLocationInfo ::= SEQUENCE { |
| 1401 | referenceFrame ReferenceFrame OPTIONAL, -- Reference Frame Number |
| 1402 | ganssTODm GANSSTODm OPTIONAL, -- GNSS TOD modulo |
| 1403 | ganssTODFrac INTEGER (0 .. 16384) OPTIONAL, -- Coding according to Annex |
| 1404 | ganssTODUncertainty GANSSTODUncertainty OPTIONAL, -- Coding according to Annex |
| 1405 | ganssTimeID INTEGER (0 .. 3) OPTIONAL, -- Coding according to Annex |
| 1406 | fixType FixType, |
| 1407 | posData PositionData, |
| 1408 | stationaryIndication INTEGER(0 .. 1) OPTIONAL, -- '0' if moving or motion not known |
| 1409 | -- Possible shapes carried in posEstimate are |
| 1410 | -- ellipsoid point, |
| 1411 | -- ellipsoid point with uncertainty circle |
| 1412 | -- ellipsoid point with uncertainty ellipse |
| 1413 | -- ellipsoid point with altitude and uncertainty ellipsoid |
| 1414 | posEstimate Ext-GeographicalInformation, |
| 1415 | ... |
| 1416 | } |
| 1417 | |
| 1418 | PositionData ::= BIT STRING { |
| 1419 | e-otd(0), |
| 1420 | gps (1), |
| 1421 | galileo (2) } (SIZE (3..16)) |
| 1422 | |
| 1423 | |
| 1424 | -- GANSS TOD modulo 1 hour |
| 1425 | GANSSTODm ::= INTEGER (0 .. 3599999) |
| 1426 | |
| 1427 | ReferenceFrame ::= SEQUENCE { |
| 1428 | referenceFN INTEGER (0 .. 65535), |
| 1429 | -- Note that applicable range for referenceFN is 0 - 42431 |
| 1430 | referenceFNMSB INTEGER (0 .. 63) OPTIONAL -- MSB of Reference Frame Number |
| 1431 | } |
| 1432 | |
| 1433 | |
| 1434 | |
| 1435 | -- GANSS Measurement Information |
| 1436 | GANSSMeasureInfo ::= SEQUENCE { |
| 1437 | -- Measurement info elements |
| 1438 | -- user has to make sure that in this element is number of elements |
| 1439 | -- defined in reference BTS identity |
| 1440 | ganssMsrSetList SeqOfGANSS-MsrSetElement |
| 1441 | } |
| 1442 | SeqOfGANSS-MsrSetElement ::= SEQUENCE (SIZE(1..3)) OF GANSS-MsrSetElement |
| 1443 | |
| 1444 | -- GANSS measurement information 1-3 times in a message |
| 1445 | GANSS-MsrSetElement ::= SEQUENCE { |
| 1446 | referenceFrame ReferenceFrame OPTIONAL, -- Reference Frame Number |
| 1447 | ganssTODm GANSSTODm OPTIONAL, -- GANSS TOD modulo |
| 1448 | deltaGNASSTOD INTEGER (0 .. 127) OPTIONAL, |
| 1449 | ganssTODUncertainty GANSSTODUncertainty OPTIONAL, -- Coding accoring to Annex |
| 1450 | |
| 1451 | --N_SGN_TYPE can be read from number of elements of SeqOfGANSS-SgnTypeElement |
| 1452 | ganss-SgnTypeList SeqOfGANSS-SgnTypeElement |
| 1453 | } |
| 1454 | |
| 1455 | -- Measurements can be returned up to 6 different signal types |
| 1456 | SeqOfGANSS-SgnTypeElement ::= SEQUENCE (SIZE(1..6)) OF GANSS-SgnTypeElement |
| 1457 | |
| 1458 | GANSS-SgnTypeElement ::= SEQUENCE { |
| 1459 | ganssSignalID INTEGER (0 .. 15), -- Coding accroding to Annex |
| 1460 | --N_SGN can be read from number of elements of SeqOfGANSS-SgnElement |
| 1461 | ganss-SgnList SeqOfGANSS-SgnElement |
| 1462 | } |
| 1463 | |
| 1464 | -- Measurements can be returned up to 16 per signal types |
| 1465 | SeqOfGANSS-SgnElement ::= SEQUENCE (SIZE(1..16)) OF GANSS-SgnElement |
| 1466 | |
| 1467 | |
| 1468 | GANSS-SgnElement ::= SEQUENCE { |
| 1469 | svID SVID, |
| 1470 | cNo INTEGER (0 .. 63), |
| 1471 | mpathDet MpathIndic, -- Coding according to Annex |
| 1472 | carrierQualityInd INTEGER (0 .. 3) OPTIONAL, -- Coding according to Annex |
| 1473 | codePhase INTEGER (0 .. 2097151), |
| 1474 | integerCodePhase INTEGER (0 .. 63) OPTIONAL, |
| 1475 | codePhaseRMSError INTEGER (0..63), -- Coding accoring to Annex |
| 1476 | doppler INTEGER (-32768 .. 32767) OPTIONAL, |
| 1477 | adr INTEGER (0 .. 33554431) OPTIONAL |
| 1478 | } |
| 1479 | |
| 1480 | Rel7-AssistanceData-Extension ::= SEQUENCE { |
| 1481 | ganss-AssistData GANSS-AssistData OPTIONAL, |
| 1482 | ganssCarrierPhaseMeasurementRequest NULL OPTIONAL, |
| 1483 | ganssTODGSMTimeAssociationMeasurementRequest NULL OPTIONAL, |
| 1484 | ... |
| 1485 | -- Possibly more extensions for Release 7 here |
| 1486 | } |
| 1487 | |
| 1488 | END |