<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> | |
<node id='Password'> | |
</node> | |
<node id='_1'> | |
<command id='show version'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='version' doc='Displays program version' /> | |
</params> | |
</command> | |
<command id='show online-help'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='online-help' doc='Online help' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='enable'> | |
<params> | |
<param name='enable' doc='Turn on privileged mode command' /> | |
</params> | |
</command> | |
<command id='terminal length <0-512>'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
<param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> | |
</params> | |
</command> | |
<command id='terminal no length'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
</params> | |
</command> | |
<command id='echo .MESSAGE'> | |
<params> | |
<param name='echo' doc='Echo a message back to the vty' /> | |
<param name='.MESSAGE' doc='The message to echo' /> | |
</params> | |
</command> | |
<command id='who'> | |
<params> | |
<param name='who' doc='Display who is on vty' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='show cs7 instance <0-15> users'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='cs7' doc='ITU-T Signaling System 7' /> | |
<param name='instance' doc='An instance of the SS7 stack' /> | |
<param name='<0-15>' doc='An instance of the SS7 stack' /> | |
<param name='users' doc='User Table' /> | |
</params> | |
</command> | |
<command id='show cs7 instance <0-15> asp'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='cs7' doc='ITU-T Signaling System 7' /> | |
<param name='instance' doc='An instance of the SS7 stack' /> | |
<param name='<0-15>' doc='An instance of the SS7 stack' /> | |
<param name='asp' doc='Application Server Process (ASP)' /> | |
</params> | |
</command> | |
<command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='cs7' doc='ITU-T Signaling System 7' /> | |
<param name='instance' doc='An instance of the SS7 stack' /> | |
<param name='<0-15>' doc='An instance of the SS7 stack' /> | |
<param name='as' doc='Application Server (AS)' /> | |
<param name='active' doc='Display all active ASs' /> | |
<param name='all' doc='Display all ASs (default)' /> | |
<param name='m3ua' doc='Display all m3ua ASs' /> | |
<param name='sua' doc='Display all SUA ASs' /> | |
</params> | |
</command> | |
<command id='logging enable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='enable' doc='Enables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging disable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='disable' doc='Disables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging print extended-timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='extended-timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> | |
</params> | |
</command> | |
<command id='logging print category (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='category' doc='Configure log message' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with category/subsystem name' /> | |
</params> | |
</command> | |
<command id='logging set-log-mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set-log-mask' doc='Set the logmask of this logging target' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging set log mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set' doc='Decide which categories to output.' /> | |
<param name='log' doc='Log commands' /> | |
<param name='mask' doc='Mask commands' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|vlr|iucs|sigtran|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='rll' doc='A-bis Radio Link Layer (RLL)' /> | |
<param name='cc' doc='Layer3 Call Control (CC)' /> | |
<param name='mm' doc='Layer3 Mobility Management (MM)' /> | |
<param name='rr' doc='Layer3 Radio Resource (RR)' /> | |
<param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> | |
<param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> | |
<param name='mncc' doc='MNCC API for Call Control application' /> | |
<param name='pag' doc='Paging Subsystem' /> | |
<param name='meas' doc='Radio Measurement Processing' /> | |
<param name='sccp' doc='SCCP Protocol' /> | |
<param name='msc' doc='Mobile Switching Center' /> | |
<param name='mgcp' doc='Media Gateway Control Protocol' /> | |
<param name='ho' doc='Hand-Over' /> | |
<param name='db' doc='Database Layer' /> | |
<param name='ref' doc='Reference Counting' /> | |
<param name='gprs' doc='GPRS Packet Service' /> | |
<param name='ns' doc='GPRS Network Service (NS)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> | |
<param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> | |
<param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> | |
<param name='ctrl' doc='Control interface' /> | |
<param name='smpp' doc='SMPP interface for external SMS apps' /> | |
<param name='filter' doc='BSC/NAT IMSI based filtering' /> | |
<param name='ranap' doc='Radio Access Network Application Part Protocol' /> | |
<param name='sua' doc='SCCP User Adaptation Protocol' /> | |
<param name='pcu' doc='PCU Interface' /> | |
<param name='vlr' doc='Visitor Location Register' /> | |
<param name='iucs' doc='Iu-CS Protocol' /> | |
<param name='sigtran' doc='SIGTRAN Signalling Transport' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='lctrl' doc='Control Interface' /> | |
<param name='lgtp' doc='GPRS GTP library' /> | |
<param name='lstats' doc='Statistics messages and logging' /> | |
<param name='lgsup' doc='Generic Subscriber Update Protocol' /> | |
<param name='loap' doc='Osmocom Authentication Protocol' /> | |
<param name='lss7' doc='libosmo-sigtran Signalling System 7' /> | |
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> | |
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> | |
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> | |
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> | |
<param name='everything' doc='Don't use. It doesn't log anything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticeable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
<command id='show logging vty'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='logging' doc='Show current logging configuration' /> | |
<param name='vty' doc='Show current logging configuration for this vty' /> | |
</params> | |
</command> | |
<command id='show alarms'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='alarms' doc='Show current logging configuration' /> | |
</params> | |
</command> | |
<command id='show stats'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='stats' doc='Show statistical values' /> | |
</params> | |
</command> | |
<command id='show stats level (global|peer|subscriber)'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='stats' doc='Show statistical values' /> | |
<param name='level' doc='Set the maximum group level' /> | |
<param name='global' doc='Show global groups only' /> | |
<param name='peer' doc='Show global and network peer related groups' /> | |
<param name='subscriber' doc='Show global, peer, and subscriber groups' /> | |
</params> | |
</command> | |
<command id='show asciidoc counters'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='asciidoc' doc='Asciidoc generation' /> | |
<param name='counters' doc='Generate table of all registered counters' /> | |
</params> | |
</command> | |
<command id='show subscriber (extension|imsi|tmsi|id) ID'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
</params> | |
</command> | |
<command id='show subscriber cache'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='subscriber' doc='Show information about subscribers' /> | |
<param name='cache' doc='Display contents of subscriber cache' /> | |
</params> | |
</command> | |
<command id='sms send pending'> | |
<params> | |
<param name='sms' doc='SMS related commands' /> | |
<param name='send' doc='SMS Sending related commands' /> | |
<param name='pending' doc='Send all pending SMS' /> | |
</params> | |
</command> | |
<command id='subscriber create imsi ID'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='create' doc='Create new subscriber' /> | |
<param name='imsi' doc='Identify the subscriber by his IMSI' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='sms' doc='SMS Operations' /> | |
<param name='sender' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='SENDER_ID' doc='Identifier for the subscriber' /> | |
<param name='send' doc='Send SMS' /> | |
<param name='.LINE' doc='Actual SMS Text' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID silent-sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='silent-sms' doc='Silent SMS Operations' /> | |
<param name='sender' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='SENDER_ID' doc='Identifier for the subscriber' /> | |
<param name='send' doc='Send SMS' /> | |
<param name='.LINE' doc='Actual SMS Text' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='silent-call' doc='Silent call operation' /> | |
<param name='start' doc='Start silent call' /> | |
<param name='any' doc='Any channel' /> | |
<param name='tch/f' doc='TCH/F channel' /> | |
<param name='tch/any' doc='Any TCH channel' /> | |
<param name='sdcch' doc='SDCCH channel' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID silent-call stop'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='silent-call' doc='Silent call operation' /> | |
<param name='stop' doc='Stop silent call' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='ussd-notify' doc='Send a USSD notify to the subscriber' /> | |
<param name='0' doc='Alerting Level 0' /> | |
<param name='1' doc='Alerting Level 1' /> | |
<param name='2' doc='Alerting Level 2' /> | |
<param name='.TEXT' doc='Text of USSD message to send' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' /> | |
<param name='close-loop' doc='Close a TCH Loop inside the MS' /> | |
<param name='a' doc='Loop Type A' /> | |
<param name='b' doc='Loop Type B' /> | |
<param name='c' doc='Loop Type C' /> | |
<param name='d' doc='Loop Type D' /> | |
<param name='e' doc='Loop Type E' /> | |
<param name='f' doc='Loop Type F' /> | |
<param name='i' doc='Loop Type I' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID ms-test open-loop'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' /> | |
<param name='open-loop' doc='Open a TCH Loop inside the MS' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID update'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='update' doc='Update the subscriber data from the dabase.' /> | |
</params> | |
</command> | |
<command id='show statistics'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='statistics' doc='Display network statistics' /> | |
</params> | |
</command> | |
<command id='show sms-queue'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='sms-queue' doc='Display SMSqueue statistics' /> | |
</params> | |
</command> | |
<command id='logging filter imsi IMSI'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='imsi' doc='Filter log messages by IMSI' /> | |
<param name='IMSI' doc='IMSI to be used as filter' /> | |
</params> | |
</command> | |
<command id='show smpp esme'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='smpp' doc='SMPP Interface' /> | |
<param name='esme' doc='SMPP Extrenal SMS Entity' /> | |
</params> | |
</command> | |
</node> | |
<node id='Password_2'> | |
</node> | |
<node id='_2'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='disable'> | |
<params> | |
<param name='disable' doc='Turn off privileged mode command' /> | |
</params> | |
</command> | |
<command id='configure terminal'> | |
<params> | |
<param name='configure' doc='Configuration from vty interface' /> | |
<param name='terminal' doc='Configuration terminal' /> | |
</params> | |
</command> | |
<command id='copy running-config startup-config'> | |
<params> | |
<param name='copy' doc='Copy configuration' /> | |
<param name='running-config' doc='Copy running config to... ' /> | |
<param name='startup-config' doc='Copy running config to startup config (same as write file)' /> | |
</params> | |
</command> | |
<command id='show startup-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='startup-config' doc='Contentes of startup configuration' /> | |
</params> | |
</command> | |
<command id='show version'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='version' doc='Displays program version' /> | |
</params> | |
</command> | |
<command id='show online-help'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='online-help' doc='Online help' /> | |
</params> | |
</command> | |
<command id='terminal length <0-512>'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
<param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> | |
</params> | |
</command> | |
<command id='terminal no length'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='length' doc='Set number of lines on a screen' /> | |
</params> | |
</command> | |
<command id='echo .MESSAGE'> | |
<params> | |
<param name='echo' doc='Echo a message back to the vty' /> | |
<param name='.MESSAGE' doc='The message to echo' /> | |
</params> | |
</command> | |
<command id='who'> | |
<params> | |
<param name='who' doc='Display who is on vty' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='terminal monitor'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='monitor' doc='Copy debug output to the current terminal line' /> | |
</params> | |
</command> | |
<command id='terminal no monitor'> | |
<params> | |
<param name='terminal' doc='Set terminal line parameters' /> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='monitor' doc='Copy debug output to the current terminal line' /> | |
</params> | |
</command> | |
<command id='show cs7 instance <0-15> users'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='cs7' doc='ITU-T Signaling System 7' /> | |
<param name='instance' doc='An instance of the SS7 stack' /> | |
<param name='<0-15>' doc='An instance of the SS7 stack' /> | |
<param name='users' doc='User Table' /> | |
</params> | |
</command> | |
<command id='show cs7 instance <0-15> asp'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='cs7' doc='ITU-T Signaling System 7' /> | |
<param name='instance' doc='An instance of the SS7 stack' /> | |
<param name='<0-15>' doc='An instance of the SS7 stack' /> | |
<param name='asp' doc='Application Server Process (ASP)' /> | |
</params> | |
</command> | |
<command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='cs7' doc='ITU-T Signaling System 7' /> | |
<param name='instance' doc='An instance of the SS7 stack' /> | |
<param name='<0-15>' doc='An instance of the SS7 stack' /> | |
<param name='as' doc='Application Server (AS)' /> | |
<param name='active' doc='Display all active ASs' /> | |
<param name='all' doc='Display all ASs (default)' /> | |
<param name='m3ua' doc='Display all m3ua ASs' /> | |
<param name='sua' doc='Display all SUA ASs' /> | |
</params> | |
</command> | |
<command id='logging enable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='enable' doc='Enables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging disable'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='disable' doc='Disables logging to this vty' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging print extended-timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='extended-timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> | |
</params> | |
</command> | |
<command id='logging print category (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='category' doc='Configure log message' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with category/subsystem name' /> | |
</params> | |
</command> | |
<command id='logging set-log-mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set-log-mask' doc='Set the logmask of this logging target' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging set log mask MASK'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='set' doc='Decide which categories to output.' /> | |
<param name='log' doc='Log commands' /> | |
<param name='mask' doc='Mask commands' /> | |
<param name='MASK' doc='The logmask to use' /> | |
</params> | |
</command> | |
<command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|vlr|iucs|sigtran|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='rll' doc='A-bis Radio Link Layer (RLL)' /> | |
<param name='cc' doc='Layer3 Call Control (CC)' /> | |
<param name='mm' doc='Layer3 Mobility Management (MM)' /> | |
<param name='rr' doc='Layer3 Radio Resource (RR)' /> | |
<param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> | |
<param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> | |
<param name='mncc' doc='MNCC API for Call Control application' /> | |
<param name='pag' doc='Paging Subsystem' /> | |
<param name='meas' doc='Radio Measurement Processing' /> | |
<param name='sccp' doc='SCCP Protocol' /> | |
<param name='msc' doc='Mobile Switching Center' /> | |
<param name='mgcp' doc='Media Gateway Control Protocol' /> | |
<param name='ho' doc='Hand-Over' /> | |
<param name='db' doc='Database Layer' /> | |
<param name='ref' doc='Reference Counting' /> | |
<param name='gprs' doc='GPRS Packet Service' /> | |
<param name='ns' doc='GPRS Network Service (NS)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> | |
<param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> | |
<param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> | |
<param name='ctrl' doc='Control interface' /> | |
<param name='smpp' doc='SMPP interface for external SMS apps' /> | |
<param name='filter' doc='BSC/NAT IMSI based filtering' /> | |
<param name='ranap' doc='Radio Access Network Application Part Protocol' /> | |
<param name='sua' doc='SCCP User Adaptation Protocol' /> | |
<param name='pcu' doc='PCU Interface' /> | |
<param name='vlr' doc='Visitor Location Register' /> | |
<param name='iucs' doc='Iu-CS Protocol' /> | |
<param name='sigtran' doc='SIGTRAN Signalling Transport' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='lctrl' doc='Control Interface' /> | |
<param name='lgtp' doc='GPRS GTP library' /> | |
<param name='lstats' doc='Statistics messages and logging' /> | |
<param name='lgsup' doc='Generic Subscriber Update Protocol' /> | |
<param name='loap' doc='Osmocom Authentication Protocol' /> | |
<param name='lss7' doc='libosmo-sigtran Signalling System 7' /> | |
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> | |
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> | |
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> | |
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> | |
<param name='everything' doc='Don't use. It doesn't log anything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticeable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
<command id='show logging vty'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='logging' doc='Show current logging configuration' /> | |
<param name='vty' doc='Show current logging configuration for this vty' /> | |
</params> | |
</command> | |
<command id='show alarms'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='alarms' doc='Show current logging configuration' /> | |
</params> | |
</command> | |
<command id='show stats'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='stats' doc='Show statistical values' /> | |
</params> | |
</command> | |
<command id='show stats level (global|peer|subscriber)'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='stats' doc='Show statistical values' /> | |
<param name='level' doc='Set the maximum group level' /> | |
<param name='global' doc='Show global groups only' /> | |
<param name='peer' doc='Show global and network peer related groups' /> | |
<param name='subscriber' doc='Show global, peer, and subscriber groups' /> | |
</params> | |
</command> | |
<command id='show asciidoc counters'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='asciidoc' doc='Asciidoc generation' /> | |
<param name='counters' doc='Generate table of all registered counters' /> | |
</params> | |
</command> | |
<command id='show subscriber (extension|imsi|tmsi|id) ID'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
</params> | |
</command> | |
<command id='show subscriber cache'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='subscriber' doc='Show information about subscribers' /> | |
<param name='cache' doc='Display contents of subscriber cache' /> | |
</params> | |
</command> | |
<command id='sms send pending'> | |
<params> | |
<param name='sms' doc='SMS related commands' /> | |
<param name='send' doc='SMS Sending related commands' /> | |
<param name='pending' doc='Send all pending SMS' /> | |
</params> | |
</command> | |
<command id='subscriber create imsi ID'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='create' doc='Create new subscriber' /> | |
<param name='imsi' doc='Identify the subscriber by his IMSI' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='sms' doc='SMS Operations' /> | |
<param name='sender' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='SENDER_ID' doc='Identifier for the subscriber' /> | |
<param name='send' doc='Send SMS' /> | |
<param name='.LINE' doc='Actual SMS Text' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID silent-sms sender (extension|imsi|tmsi|id) SENDER_ID send .LINE'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='silent-sms' doc='Silent SMS Operations' /> | |
<param name='sender' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='SENDER_ID' doc='Identifier for the subscriber' /> | |
<param name='send' doc='Send SMS' /> | |
<param name='.LINE' doc='Actual SMS Text' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID silent-call start (any|tch/f|tch/any|sdcch)'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='silent-call' doc='Silent call operation' /> | |
<param name='start' doc='Start silent call' /> | |
<param name='any' doc='Any channel' /> | |
<param name='tch/f' doc='TCH/F channel' /> | |
<param name='tch/any' doc='Any TCH channel' /> | |
<param name='sdcch' doc='SDCCH channel' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID silent-call stop'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='silent-call' doc='Silent call operation' /> | |
<param name='stop' doc='Stop silent call' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID ussd-notify (0|1|2) .TEXT'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='ussd-notify' doc='Send a USSD notify to the subscriber' /> | |
<param name='0' doc='Alerting Level 0' /> | |
<param name='1' doc='Alerting Level 1' /> | |
<param name='2' doc='Alerting Level 2' /> | |
<param name='.TEXT' doc='Text of USSD message to send' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID ms-test close-loop (a|b|c|d|e|f|i)'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' /> | |
<param name='close-loop' doc='Close a TCH Loop inside the MS' /> | |
<param name='a' doc='Loop Type A' /> | |
<param name='b' doc='Loop Type B' /> | |
<param name='c' doc='Loop Type C' /> | |
<param name='d' doc='Loop Type D' /> | |
<param name='e' doc='Loop Type E' /> | |
<param name='f' doc='Loop Type F' /> | |
<param name='i' doc='Loop Type I' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID ms-test open-loop'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='ms-test' doc='Send a TS 04.14 MS Test Command to subscriber' /> | |
<param name='open-loop' doc='Open a TCH Loop inside the MS' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID update'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='update' doc='Update the subscriber data from the dabase.' /> | |
</params> | |
</command> | |
<command id='show statistics'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='statistics' doc='Display network statistics' /> | |
</params> | |
</command> | |
<command id='show sms-queue'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='sms-queue' doc='Display SMSqueue statistics' /> | |
</params> | |
</command> | |
<command id='logging filter imsi IMSI'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='imsi' doc='Filter log messages by IMSI' /> | |
<param name='IMSI' doc='IMSI to be used as filter' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID expire'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='expire' doc='Expire the subscriber Now' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID a3a8 (none|xor|comp128v1) [KI]'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='a3a8' doc='Set a3a8 parameters for the subscriber' /> | |
<param name='none' doc='Use No A3A8 algorithm' /> | |
<param name='xor' doc='Use XOR algorithm' /> | |
<param name='comp128v1' doc='Use COMP128v1 algorithm' /> | |
<param name='[KI]' doc='Encryption Key Ki' /> | |
</params> | |
</command> | |
<command id='sms-queue trigger'> | |
<params> | |
<param name='sms-queue' doc='SMS Queue' /> | |
<param name='trigger' doc='Trigger sending messages' /> | |
</params> | |
</command> | |
<command id='sms-queue max-pending <1-500>'> | |
<params> | |
<param name='sms-queue' doc='SMS Queue' /> | |
<param name='max-pending' doc='SMS to deliver in parallel' /> | |
<param name='<1-500>' doc='Amount' /> | |
</params> | |
</command> | |
<command id='sms-queue clear'> | |
<params> | |
<param name='sms-queue' doc='SMS Queue' /> | |
<param name='clear' doc='Clear the queue of pending SMS' /> | |
</params> | |
</command> | |
<command id='sms-queue max-failure <1-500>'> | |
<params> | |
<param name='sms-queue' doc='SMS Queue' /> | |
<param name='max-failure' doc='Maximum amount of delivery failures' /> | |
<param name='<1-500>' doc='Amount' /> | |
</params> | |
</command> | |
<command id='subscriber (extension|imsi|tmsi|id) ID sms pending-send'> | |
<params> | |
<param name='subscriber' doc='Operations on a Subscriber' /> | |
<param name='extension' doc='Identify subscriber by extension (phone number)' /> | |
<param name='imsi' doc='Identify subscriber by IMSI' /> | |
<param name='tmsi' doc='Identify subscriber by TMSI' /> | |
<param name='id' doc='Identify subscriber by database ID' /> | |
<param name='ID' doc='Identifier for the subscriber' /> | |
<param name='sms' doc='SMS Operations' /> | |
<param name='pending-send' doc='Send pending SMS' /> | |
</params> | |
</command> | |
<command id='meas-feed scenario NAME'> | |
<params> | |
<param name='meas-feed' doc='Measurement export related' /> | |
<param name='scenario' doc='scenario' /> | |
<param name='NAME' doc='Name up to 31 characters included in report' /> | |
</params> | |
</command> | |
<command id='show smpp esme'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='smpp' doc='SMPP Interface' /> | |
<param name='esme' doc='SMPP Extrenal SMS Entity' /> | |
</params> | |
</command> | |
</node> | |
<node id='config'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='hostname WORD'> | |
<params> | |
<param name='hostname' doc='Set system's network name' /> | |
<param name='WORD' doc='This system's network name' /> | |
</params> | |
</command> | |
<command id='no hostname [HOSTNAME]'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='hostname' doc='Reset system's network name' /> | |
<param name='[HOSTNAME]' doc='Host name of this router' /> | |
</params> | |
</command> | |
<command id='password (8|) WORD'> | |
<params> | |
<param name='password' doc='Assign the terminal connection password' /> | |
<param name='8' doc='Specifies a HIDDEN password will follow' /> | |
<param name='' doc='dummy string ' /> | |
<param name='WORD' doc='The HIDDEN line password string' /> | |
</params> | |
</command> | |
<command id='password LINE'> | |
<params> | |
<param name='password' doc='Assign the terminal connection password' /> | |
<param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> | |
</params> | |
</command> | |
<command id='enable password (8|) WORD'> | |
<params> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
<param name='8' doc='Specifies a HIDDEN password will follow' /> | |
<param name='' doc='dummy string ' /> | |
<param name='WORD' doc='The HIDDEN 'enable' password string' /> | |
</params> | |
</command> | |
<command id='enable password LINE'> | |
<params> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
<param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> | |
</params> | |
</command> | |
<command id='no enable password'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='enable' doc='Modify enable password parameters' /> | |
<param name='password' doc='Assign the privileged level password' /> | |
</params> | |
</command> | |
<command id='banner motd default'> | |
<params> | |
<param name='banner' doc='Set banner string' /> | |
<param name='motd' doc='Strings for motd' /> | |
<param name='default' doc='Default string' /> | |
</params> | |
</command> | |
<command id='banner motd file [FILE]'> | |
<params> | |
<param name='banner' doc='Set banner' /> | |
<param name='motd' doc='Banner for motd' /> | |
<param name='file' doc='Banner from a file' /> | |
<param name='[FILE]' doc='Filename' /> | |
</params> | |
</command> | |
<command id='no banner motd'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='banner' doc='Set banner string' /> | |
<param name='motd' doc='Strings for motd' /> | |
</params> | |
</command> | |
<command id='service terminal-length <0-512>'> | |
<params> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='terminal-length' doc='System wide terminal length configuration' /> | |
<param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> | |
</params> | |
</command> | |
<command id='no service terminal-length [<0-512>]'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='terminal-length' doc='System wide terminal length configuration' /> | |
<param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> | |
</params> | |
</command> | |
<command id='line vty'> | |
<params> | |
<param name='line' doc='Configure a terminal line' /> | |
<param name='vty' doc='Virtual terminal' /> | |
</params> | |
</command> | |
<command id='service advanced-vty'> | |
<params> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='advanced-vty' doc='Enable advanced mode vty interface' /> | |
</params> | |
</command> | |
<command id='no service advanced-vty'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='service' doc='Set up miscellaneous service' /> | |
<param name='advanced-vty' doc='Enable advanced mode vty interface' /> | |
</params> | |
</command> | |
<command id='show history'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='history' doc='Display the session command history' /> | |
</params> | |
</command> | |
<command id='cs7 instance <0-15>'> | |
<params> | |
<param name='cs7' doc='ITU-T Signaling System 7' /> | |
<param name='instance' doc='Configure a SS7 Instance' /> | |
<param name='<0-15>' doc='An instance of the SS7 stack' /> | |
</params> | |
</command> | |
<command id='ctrl'> | |
<params> | |
<param name='ctrl' doc='Configure the Control Interface' /> | |
</params> | |
</command> | |
<command id='log stderr'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='stderr' doc='Logging via STDERR of the process' /> | |
</params> | |
</command> | |
<command id='no log stderr'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='stderr' doc='Logging via STDERR of the process' /> | |
</params> | |
</command> | |
<command id='log file .FILENAME'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='file' doc='Logging to text file' /> | |
<param name='.FILENAME' doc='Filename' /> | |
</params> | |
</command> | |
<command id='no log file .FILENAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='file' doc='Logging to text file' /> | |
<param name='.FILENAME' doc='Filename' /> | |
</params> | |
</command> | |
<command id='log alarms <2-32700>'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='alarms' doc='Logging alarms to osmo_strrb' /> | |
<param name='<2-32700>' doc='Maximum number of messages to log' /> | |
</params> | |
</command> | |
<command id='no log alarms'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='alarms' doc='Logging alarms to osmo_strrb' /> | |
</params> | |
</command> | |
<command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
<param name='authpriv' doc='Security/authorization messages facility' /> | |
<param name='cron' doc='Clock daemon (cron/at) facility' /> | |
<param name='daemon' doc='General system daemon facility' /> | |
<param name='ftp' doc='Ftp daemon facility' /> | |
<param name='lpr' doc='Line printer facility' /> | |
<param name='mail' doc='Mail facility' /> | |
<param name='news' doc='News facility' /> | |
<param name='user' doc='Generic facility' /> | |
<param name='uucp' doc='UUCP facility' /> | |
</params> | |
</command> | |
<command id='log syslog local <0-7>'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
<param name='local' doc='Syslog LOCAL facility' /> | |
<param name='<0-7>' doc='Local facility number' /> | |
</params> | |
</command> | |
<command id='no log syslog'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='syslog' doc='Logging via syslog' /> | |
</params> | |
</command> | |
<command id='log gsmtap [HOSTNAME]'> | |
<params> | |
<param name='log' doc='Configure logging sub-system' /> | |
<param name='gsmtap' doc='Logging via GSMTAP' /> | |
<param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> | |
</params> | |
</command> | |
<command id='stats reporter statsd'> | |
<params> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='reporter' doc='Configure a stats reporter' /> | |
<param name='statsd' doc='Report to a STATSD server' /> | |
</params> | |
</command> | |
<command id='no stats reporter statsd'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='reporter' doc='Configure a stats reporter' /> | |
<param name='statsd' doc='Report to a STATSD server' /> | |
</params> | |
</command> | |
<command id='stats reporter log'> | |
<params> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='reporter' doc='Configure a stats reporter' /> | |
<param name='log' doc='Report to the logger' /> | |
</params> | |
</command> | |
<command id='no stats reporter log'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='reporter' doc='Configure a stats reporter' /> | |
<param name='log' doc='Report to the logger' /> | |
</params> | |
</command> | |
<command id='stats interval <1-65535>'> | |
<params> | |
<param name='stats' doc='Configure stats sub-system' /> | |
<param name='interval' doc='Set the reporting interval' /> | |
<param name='<1-65535>' doc='Interval in seconds' /> | |
</params> | |
</command> | |
<command id='network'> | |
<params> | |
<param name='network' doc='Configure the GSM network' /> | |
</params> | |
</command> | |
<command id='msc'> | |
<params> | |
<param name='msc' doc='Configure MSC options' /> | |
</params> | |
</command> | |
<command id='mncc-int'> | |
<params> | |
<param name='mncc-int' doc='Configure internal MNCC handler' /> | |
</params> | |
</command> | |
<command id='hlr'> | |
<params> | |
<param name='hlr' doc='Configure connection to the HLR' /> | |
</params> | |
</command> | |
<command id='smpp'> | |
<params> | |
<param name='smpp' doc='Configure SMPP SMS Interface' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-log'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='logging filter all (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='all' doc='Do you want to log all messages?' /> | |
<param name='0' doc='Only print messages matched by other filters' /> | |
<param name='1' doc='Bypass filter and print all messages' /> | |
</params> | |
</command> | |
<command id='logging color (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='color' doc='Configure color-printing for log messages' /> | |
<param name='0' doc='Don't use color for printing messages' /> | |
<param name='1' doc='Use color for printing messages' /> | |
</params> | |
</command> | |
<command id='logging timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp' /> | |
</params> | |
</command> | |
<command id='logging print extended-timestamp (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='extended-timestamp' doc='Configure log message timestamping' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> | |
</params> | |
</command> | |
<command id='logging print category (0|1)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='print' doc='Log output settings' /> | |
<param name='category' doc='Configure log message' /> | |
<param name='0' doc='Don't prefix each log message' /> | |
<param name='1' doc='Prefix each log message with category/subsystem name' /> | |
</params> | |
</command> | |
<command id='logging level (all|rll|cc|mm|rr|rsl|nm|mncc|pag|meas|sccp|msc|mgcp|ho|db|ref|gprs|ns|bssgp|llc|sndcp|nat|ctrl|smpp|filter|ranap|sua|pcu|vlr|iucs|sigtran|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='level' doc='Set the log level for a specified category' /> | |
<param name='all' doc='Global setting for all subsystems' /> | |
<param name='rll' doc='A-bis Radio Link Layer (RLL)' /> | |
<param name='cc' doc='Layer3 Call Control (CC)' /> | |
<param name='mm' doc='Layer3 Mobility Management (MM)' /> | |
<param name='rr' doc='Layer3 Radio Resource (RR)' /> | |
<param name='rsl' doc='A-bis Radio Siganlling Link (RSL)' /> | |
<param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> | |
<param name='mncc' doc='MNCC API for Call Control application' /> | |
<param name='pag' doc='Paging Subsystem' /> | |
<param name='meas' doc='Radio Measurement Processing' /> | |
<param name='sccp' doc='SCCP Protocol' /> | |
<param name='msc' doc='Mobile Switching Center' /> | |
<param name='mgcp' doc='Media Gateway Control Protocol' /> | |
<param name='ho' doc='Hand-Over' /> | |
<param name='db' doc='Database Layer' /> | |
<param name='ref' doc='Reference Counting' /> | |
<param name='gprs' doc='GPRS Packet Service' /> | |
<param name='ns' doc='GPRS Network Service (NS)' /> | |
<param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' /> | |
<param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' /> | |
<param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' /> | |
<param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> | |
<param name='ctrl' doc='Control interface' /> | |
<param name='smpp' doc='SMPP interface for external SMS apps' /> | |
<param name='filter' doc='BSC/NAT IMSI based filtering' /> | |
<param name='ranap' doc='Radio Access Network Application Part Protocol' /> | |
<param name='sua' doc='SCCP User Adaptation Protocol' /> | |
<param name='pcu' doc='PCU Interface' /> | |
<param name='vlr' doc='Visitor Location Register' /> | |
<param name='iucs' doc='Iu-CS Protocol' /> | |
<param name='sigtran' doc='SIGTRAN Signalling Transport' /> | |
<param name='lglobal' doc='Library-internal global log family' /> | |
<param name='llapd' doc='LAPD in libosmogsm' /> | |
<param name='linp' doc='A-bis Intput Subsystem' /> | |
<param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> | |
<param name='lmi' doc='A-bis Input Driver for Signalling' /> | |
<param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> | |
<param name='lsms' doc='Layer3 Short Message Service (SMS)' /> | |
<param name='lctrl' doc='Control Interface' /> | |
<param name='lgtp' doc='GPRS GTP library' /> | |
<param name='lstats' doc='Statistics messages and logging' /> | |
<param name='lgsup' doc='Generic Subscriber Update Protocol' /> | |
<param name='loap' doc='Osmocom Authentication Protocol' /> | |
<param name='lss7' doc='libosmo-sigtran Signalling System 7' /> | |
<param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> | |
<param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> | |
<param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> | |
<param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> | |
<param name='everything' doc='Don't use. It doesn't log anything' /> | |
<param name='debug' doc='Log debug messages and higher levels' /> | |
<param name='info' doc='Log informational messages and higher levels' /> | |
<param name='notice' doc='Log noticeable messages and higher levels' /> | |
<param name='error' doc='Log error messages and higher levels' /> | |
<param name='fatal' doc='Log only fatal messages' /> | |
</params> | |
</command> | |
<command id='logging level sms (everything|debug|info|notice|error|fatal)'> | |
<params> | |
<param name='logging' doc='.HIDDEN' /> | |
<param name='level' doc='Obsolete' /> | |
<param name='sms' doc='Obsolete' /> | |
<param name='everything' doc='Obsolete' /> | |
<param name='debug' doc='Obsolete' /> | |
<param name='info' doc='Obsolete' /> | |
<param name='notice' doc='Obsolete' /> | |
<param name='error' doc='Obsolete' /> | |
<param name='fatal' doc='Obsolete' /> | |
</params> | |
</command> | |
<command id='logging filter imsi IMSI'> | |
<params> | |
<param name='logging' doc='Configure log message to this terminal' /> | |
<param name='filter' doc='Filter log messages' /> | |
<param name='imsi' doc='Filter log messages by IMSI' /> | |
<param name='IMSI' doc='IMSI to be used as filter' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-stats'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='local-ip ADDR'> | |
<params> | |
<param name='local-ip' doc='Set the IP address to which we bind locally' /> | |
<param name='ADDR' doc='IP Address' /> | |
</params> | |
</command> | |
<command id='no local-ip'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='local-ip' doc='Set the IP address to which we bind locally' /> | |
</params> | |
</command> | |
<command id='remote-ip ADDR'> | |
<params> | |
<param name='remote-ip' doc='Set the remote IP address to which we connect' /> | |
<param name='ADDR' doc='IP Address' /> | |
</params> | |
</command> | |
<command id='remote-port <1-65535>'> | |
<params> | |
<param name='remote-port' doc='Set the remote port to which we connect' /> | |
<param name='<1-65535>' doc='Remote port number' /> | |
</params> | |
</command> | |
<command id='mtu <100-65535>'> | |
<params> | |
<param name='mtu' doc='Set the maximum packet size' /> | |
<param name='<100-65535>' doc='Size in byte' /> | |
</params> | |
</command> | |
<command id='no mtu'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='mtu' doc='Set the maximum packet size' /> | |
</params> | |
</command> | |
<command id='prefix PREFIX'> | |
<params> | |
<param name='prefix' doc='Set the item name prefix' /> | |
<param name='PREFIX' doc='The prefix string' /> | |
</params> | |
</command> | |
<command id='no prefix'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='prefix' doc='Set the item name prefix' /> | |
</params> | |
</command> | |
<command id='level (global|peer|subscriber)'> | |
<params> | |
<param name='level' doc='Set the maximum group level' /> | |
<param name='global' doc='Report global groups only' /> | |
<param name='peer' doc='Report global and network peer related groups' /> | |
<param name='subscriber' doc='Report global, peer, and subscriber groups' /> | |
</params> | |
</command> | |
<command id='enable'> | |
<params> | |
<param name='enable' doc='Enable the reporter' /> | |
</params> | |
</command> | |
<command id='disable'> | |
<params> | |
<param name='disable' doc='Disable the reporter' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-line'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='login'> | |
<params> | |
<param name='login' doc='Enable password checking' /> | |
</params> | |
</command> | |
<command id='no login'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='login' doc='Enable password checking' /> | |
</params> | |
</command> | |
<command id='bind A.B.C.D'> | |
<params> | |
<param name='bind' doc='Accept VTY telnet connections on local interface' /> | |
<param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-ctrl'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='bind A.B.C.D'> | |
<params> | |
<param name='bind' doc='Set bind address to listen for Control connections' /> | |
<param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-cs7'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='description .TEXT'> | |
<params> | |
<param name='description' doc='Save human-readable description of the object' /> | |
<param name='.TEXT' doc='Text until the end of the line' /> | |
</params> | |
</command> | |
<command id='network-indicator (international | national | reserved | spare)'> | |
<params> | |
<param name='network-indicator' doc='Configure the Network Indicator' /> | |
<param name='international' doc='International Network' /> | |
<param name='national' doc='National Network' /> | |
<param name='reserved' doc='Reserved Network' /> | |
<param name='spare' doc='Spare Network' /> | |
</params> | |
</command> | |
<command id='point-code POINT_CODE'> | |
<params> | |
<param name='point-code' doc='Configure the local Point Code' /> | |
<param name='POINT_CODE' doc='Point Code' /> | |
</params> | |
</command> | |
<command id='point-code format <1-24> [<1-23>] [<1-22>]'> | |
<params> | |
<param name='point-code' doc='Point Code' /> | |
<param name='format' doc='Configure Point Code Format' /> | |
<param name='<1-24>' doc='Length of first PC component' /> | |
<param name='[<1-23>]' doc='Length of second PC component' /> | |
<param name='[<1-22>]' doc='Length of third PC component' /> | |
</params> | |
</command> | |
<command id='point-code format default'> | |
<params> | |
<param name='point-code' doc='Point Code' /> | |
<param name='format' doc='Configure Point Code Format' /> | |
<param name='default' doc='Default Point Code Format (3.8.3)' /> | |
</params> | |
</command> | |
<command id='point-code delimiter (default|dash)'> | |
<params> | |
<param name='point-code' doc='Point Code' /> | |
<param name='delimiter' doc='Configure Point Code Delimiter' /> | |
<param name='default' doc='Use dot as delimiter' /> | |
<param name='dash' doc='User dash as delimiter' /> | |
</params> | |
</command> | |
<command id='xua rkm routing-key-allocation (static-only|dynamic-permitted)'> | |
<params> | |
<param name='xua' doc='SIGTRAN xxxUA related' /> | |
<param name='rkm' doc='Routing Key Management' /> | |
<param name='routing-key-allocation' doc='Routing Key Management Allocation Policy' /> | |
<param name='static-only' doc='Only static (pre-confgured) Routing Keys permitted' /> | |
<param name='dynamic-permitted' doc='Dynamically allocate Routing Keys for what ASPs request' /> | |
</params> | |
</command> | |
<command id='asp NAME <0-65535> <0-65535> (sua|m3ua|ipa)'> | |
<params> | |
<param name='asp' doc='Configure Application Server Process' /> | |
<param name='NAME' doc='Name of ASP' /> | |
<param name='<0-65535>' doc='Remote SCTP port number' /> | |
<param name='<0-65535>' doc='Local SCTP port number' /> | |
<param name='sua' doc='SCCP User Adaptation' /> | |
<param name='m3ua' doc='MTP3 User Adaptation' /> | |
<param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> | |
</params> | |
</command> | |
<command id='no asp NAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='asp' doc='Disable Application Server Process' /> | |
<param name='NAME' doc='Name of ASP' /> | |
</params> | |
</command> | |
<command id='as NAME (sua|m3ua|ipa)'> | |
<params> | |
<param name='as' doc='Configure an Application Server' /> | |
<param name='NAME' doc='Name of the Application Server' /> | |
<param name='sua' doc='SCCP User Adaptation' /> | |
<param name='m3ua' doc='MTP3 User Adaptation' /> | |
<param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> | |
</params> | |
</command> | |
<command id='no as NAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='as' doc='Disable Application Server' /> | |
<param name='NAME' doc='Name of AS' /> | |
</params> | |
</command> | |
<command id='show cs7 instance <0-15> sccp-addressbook'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='cs7' doc='ITU-T Signaling System 7' /> | |
<param name='instance' doc='An instance of the SS7 stack' /> | |
<param name='<0-15>' doc='An instance of the SS7 stack' /> | |
<param name='sccp-addressbook' doc='List all SCCP addressbook entries' /> | |
</params> | |
</command> | |
<command id='sccp-address NAME'> | |
<params> | |
<param name='sccp-address' doc='Create/Modify an SCCP addressbook entry' /> | |
<param name='NAME' doc='Name of the SCCP Address' /> | |
</params> | |
</command> | |
<command id='no sccp-address NAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='sccp-address' doc='Delete an SCCP addressbook entry' /> | |
<param name='NAME' doc='Name of the SCCP Address' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-cs7-as'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='description .TEXT'> | |
<params> | |
<param name='description' doc='Save human-readable description of the object' /> | |
<param name='.TEXT' doc='Text until the end of the line' /> | |
</params> | |
</command> | |
<command id='asp NAME'> | |
<params> | |
<param name='asp' doc='Specify that a given ASP is part of this AS' /> | |
<param name='NAME' doc='Name of ASP to be added to AS' /> | |
</params> | |
</command> | |
<command id='no asp NAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='asp' doc='Specify ASP to be removed from this AS' /> | |
<param name='NAME' doc='Name of ASP to be removed' /> | |
</params> | |
</command> | |
<command id='traffic-mode (broadcast | loadshare | roundrobin | override)'> | |
<params> | |
<param name='traffic-mode' doc='Specifies traffic mode of operation of the ASP within the AS' /> | |
<param name='broadcast' doc='Broadcast to all ASP within AS' /> | |
<param name='loadshare' doc='Share Load among all ASP within AS' /> | |
<param name='roundrobin' doc='Round-Robin between all ASP within AS' /> | |
<param name='override' doc='Override' /> | |
</params> | |
</command> | |
<command id='recovery-timeout <1-2000>'> | |
<params> | |
<param name='recovery-timeout' doc='Specifies the recovery timeout value in milliseconds' /> | |
<param name='<1-2000>' doc='Recovery Timeout in Milliseconds' /> | |
</params> | |
</command> | |
<command id='qos-class <0-255>'> | |
<params> | |
<param name='qos-class' doc='Specity QoS Class of AS' /> | |
<param name='<0-255>' doc='QoS Class of AS' /> | |
</params> | |
</command> | |
<command id='routing-key RCONTEXT DPC'> | |
<params> | |
<param name='routing-key' doc='Define a routing key' /> | |
<param name='RCONTEXT' doc='Routing context number' /> | |
<param name='DPC' doc='Destination Point Code' /> | |
</params> | |
</command> | |
<command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)'> | |
<params> | |
<param name='routing-key' doc='Define a routing key' /> | |
<param name='RCONTEXT' doc='Routing context number' /> | |
<param name='DPC' doc='Destination Point Code' /> | |
<param name='si' doc='Match on Service Indicator' /> | |
<param name='aal2' doc='ATM Adaption Layer 2' /> | |
<param name='bicc' doc='Bearer Independent Call Control' /> | |
<param name='b-isup' doc='Broadband ISDN User Part' /> | |
<param name='h248' doc='H.248' /> | |
<param name='isup' doc='ISDN User Part' /> | |
<param name='sat-isup' doc='Sattelite ISDN User Part' /> | |
<param name='sccp' doc='Signalling Connection Control Part' /> | |
<param name='tup' doc='Telephony User Part' /> | |
</params> | |
</command> | |
<command id='routing-key RCONTEXT DPC ssn SSN'> | |
<params> | |
<param name='routing-key' doc='Define a routing key' /> | |
<param name='RCONTEXT' doc='Routing context number' /> | |
<param name='DPC' doc='Destination Point Code' /> | |
<param name='ssn' doc='Match on Sub-System Number' /> | |
<param name='SSN' doc='Sub-System Number to match on' /> | |
</params> | |
</command> | |
<command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN'> | |
<params> | |
<param name='routing-key' doc='Define a routing key' /> | |
<param name='RCONTEXT' doc='Routing context number' /> | |
<param name='DPC' doc='Destination Point Code' /> | |
<param name='si' doc='Match on Service Indicator' /> | |
<param name='aal2' doc='ATM Adaption Layer 2' /> | |
<param name='bicc' doc='Bearer Independent Call Control' /> | |
<param name='b-isup' doc='Broadband ISDN User Part' /> | |
<param name='h248' doc='H.248' /> | |
<param name='isup' doc='ISDN User Part' /> | |
<param name='sat-isup' doc='Sattelite ISDN User Part' /> | |
<param name='sccp' doc='Signalling Connection Control Part' /> | |
<param name='tup' doc='Telephony User Part' /> | |
<param name='ssn' doc='Match on Sub-System Number' /> | |
<param name='SSN' doc='Sub-System Number to match on' /> | |
</params> | |
</command> | |
<command id='point-code override dpc PC'> | |
<params> | |
<param name='point-code' doc='Point Code Specific Features' /> | |
<param name='override' doc='Override (force) a point-code to hard-coded value' /> | |
<param name='dpc' doc='Override Source Point Code' /> | |
<param name='PC' doc='Override Destination Point Code' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-cs7-asp'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='description .TEXT'> | |
<params> | |
<param name='description' doc='Save human-readable description of the object' /> | |
<param name='.TEXT' doc='Text until the end of the line' /> | |
</params> | |
</command> | |
<command id='remote-ip A.B.C.D'> | |
<params> | |
<param name='remote-ip' doc='Specify Remote IP Address of ASP' /> | |
<param name='A.B.C.D' doc='Remote IP Address of ASP' /> | |
</params> | |
</command> | |
<command id='local-ip A.B.C.D'> | |
<params> | |
<param name='local-ip' doc='Specify Local IP Address from which to contact ASP' /> | |
<param name='A.B.C.D' doc='Local IP Address from which to contact of ASP' /> | |
</params> | |
</command> | |
<command id='qos-class <0-255>'> | |
<params> | |
<param name='qos-class' doc='Specify QoS Class of ASP' /> | |
<param name='<0-255>' doc='QoS Class of ASP' /> | |
</params> | |
</command> | |
<command id='block'> | |
<params> | |
<param name='block' doc='Allows a SCTP Association with ASP, but doesn't let it become active' /> | |
</params> | |
</command> | |
<command id='shutdown'> | |
<params> | |
<param name='shutdown' doc='Terminates SCTP association; New associations will be rejected' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-cs7-sccpaddr'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='no point-code'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='point-code' doc='Remove point-code Number' /> | |
</params> | |
</command> | |
<command id='no subsystem-number'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='subsystem-number' doc='Remove Subsystem Number' /> | |
</params> | |
</command> | |
<command id='no global-title'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='global-title' doc='Remove Global Title' /> | |
</params> | |
</command> | |
<command id='routing-indicator (GT|PC|IP)'> | |
<params> | |
<param name='routing-indicator' doc='Add Routing Indicator' /> | |
<param name='GT' doc='by global-title' /> | |
<param name='PC' doc='by point-code' /> | |
<param name='IP' doc='by ip-address' /> | |
</params> | |
</command> | |
<command id='point-code POINT_CODE'> | |
<params> | |
<param name='point-code' doc='Add point-code Number' /> | |
<param name='POINT_CODE' doc='PC' /> | |
</params> | |
</command> | |
<command id='subsystem-number <0-4294967295>'> | |
<params> | |
<param name='subsystem-number' doc='Add Subsystem Number' /> | |
<param name='<0-4294967295>' doc='SSN' /> | |
</params> | |
</command> | |
<command id='global-title'> | |
<params> | |
<param name='global-title' doc='Add/Modify Global Title' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-cs7-sccpaddr-gt'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='global-title-indicator <0-15>'> | |
<params> | |
<param name='global-title-indicator' doc='Set Global Title Indicator' /> | |
<param name='<0-15>' doc='GTI' /> | |
</params> | |
</command> | |
<command id='translation-type <0-255>'> | |
<params> | |
<param name='translation-type' doc='Set Global Title Translation Type' /> | |
<param name='<0-255>' doc='TT' /> | |
</params> | |
</command> | |
<command id='numbering-plan-indicator <0-15>'> | |
<params> | |
<param name='numbering-plan-indicator' doc='Set Global Title Numbering Plan Indicator' /> | |
<param name='<0-15>' doc='NPI' /> | |
</params> | |
</command> | |
<command id='nature-of-address-indicator <0-127>'> | |
<params> | |
<param name='nature-of-address-indicator' doc='Set Global Title Nature of Address Indicator' /> | |
<param name='<0-127>' doc='NAI' /> | |
</params> | |
</command> | |
<command id='digits DIGITS'> | |
<params> | |
<param name='digits' doc='Set Global Title Digits' /> | |
<param name='DIGITS' doc='Number digits' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-net'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='network country code <1-999>'> | |
<params> | |
<param name='network' doc='Set the GSM network country code' /> | |
<param name='country' doc='Country commands' /> | |
<param name='code' doc='Code commands' /> | |
<param name='<1-999>' doc='Network Country Code to use' /> | |
</params> | |
</command> | |
<command id='mobile network code <0-999>'> | |
<params> | |
<param name='mobile' doc='Set the GSM mobile network code' /> | |
<param name='network' doc='Network Commands' /> | |
<param name='code' doc='Code commands' /> | |
<param name='<0-999>' doc='Mobile Network Code to use' /> | |
</params> | |
</command> | |
<command id='short name NAME'> | |
<params> | |
<param name='short' doc='Set the short GSM network name' /> | |
<param name='name' doc='Name Commands' /> | |
<param name='NAME' doc='Name to use' /> | |
</params> | |
</command> | |
<command id='long name NAME'> | |
<params> | |
<param name='long' doc='Set the long GSM network name' /> | |
<param name='name' doc='Name Commands' /> | |
<param name='NAME' doc='Name to use' /> | |
</params> | |
</command> | |
<command id='auth policy (closed|accept-all|regexp|token)'> | |
<params> | |
<param name='auth' doc='Authentication (not cryptographic)' /> | |
<param name='policy' doc='Set the GSM network authentication policy' /> | |
<param name='closed' doc='Require the MS to be activated in HLR' /> | |
<param name='accept-all' doc='Accept all MS, whether in HLR or not' /> | |
<param name='regexp' doc='Use regular expression for IMSI authorization decision' /> | |
<param name='token' doc='Use SMS-token based authentication' /> | |
</params> | |
</command> | |
<command id='authorized-regexp REGEXP'> | |
<params> | |
<param name='authorized-regexp' doc='Set regexp for IMSI which will be used for authorization decision' /> | |
<param name='REGEXP' doc='Regular expression, IMSIs matching it are allowed to use the network' /> | |
</params> | |
</command> | |
<command id='location updating reject cause <2-111>'> | |
<params> | |
<param name='location' doc='Set the reject cause of location updating reject' /> | |
<param name='updating' doc='Set the reject cause of location updating reject' /> | |
<param name='reject' doc='Set the reject cause of location updating reject' /> | |
<param name='cause' doc='Set the reject cause of location updating reject' /> | |
<param name='<2-111>' doc='Cause Value as Per GSM TS 04.08' /> | |
</params> | |
</command> | |
<command id='encryption a5 (0|1|2|3)'> | |
<params> | |
<param name='encryption' doc='Encryption options' /> | |
<param name='a5' doc='A5 encryption' /> | |
<param name='0' doc='A5/0: No encryption' /> | |
<param name='1' doc='A5/1: Encryption' /> | |
<param name='2' doc='A5/2: Export-grade Encryption' /> | |
<param name='3' doc='A5/3: 'New' Secure Encryption' /> | |
</params> | |
</command> | |
<command id='authentication (optional|required)'> | |
<params> | |
<param name='authentication' doc='Whether to enforce MS authentication in 2G' /> | |
<param name='optional' doc='Allow MS to attach via 2G BSC without authentication' /> | |
<param name='required' doc='Always do authentication' /> | |
</params> | |
</command> | |
<command id='rrlp mode (none|ms-based|ms-preferred|ass-preferred)'> | |
<params> | |
<param name='rrlp' doc='Radio Resource Location Protocol' /> | |
<param name='mode' doc='Set the Radio Resource Location Protocol Mode' /> | |
<param name='none' doc='Don't send RRLP request' /> | |
<param name='ms-based' doc='Request MS-based location' /> | |
<param name='ms-preferred' doc='Request any location, prefer MS-based' /> | |
<param name='ass-preferred' doc='Request any location, prefer MS-assisted' /> | |
</params> | |
</command> | |
<command id='mm info (0|1)'> | |
<params> | |
<param name='mm' doc='Mobility Management' /> | |
<param name='info' doc='Send MM INFO after LOC UPD ACCEPT' /> | |
<param name='0' doc='Disable' /> | |
<param name='1' doc='Enable' /> | |
</params> | |
</command> | |
<command id='timezone <-19-19> (0|15|30|45)'> | |
<params> | |
<param name='timezone' doc='Set the Timezone Offset of the network' /> | |
<param name='<-19-19>' doc='Timezone offset (hours)' /> | |
<param name='0' doc='Timezone offset (00 minutes)' /> | |
<param name='15' doc='Timezone offset (15 minutes)' /> | |
<param name='30' doc='Timezone offset (30 minutes)' /> | |
<param name='45' doc='Timezone offset (45 minutes)' /> | |
</params> | |
</command> | |
<command id='timezone <-19-19> (0|15|30|45) <0-2>'> | |
<params> | |
<param name='timezone' doc='Set the Timezone Offset of the network' /> | |
<param name='<-19-19>' doc='Timezone offset (hours)' /> | |
<param name='0' doc='Timezone offset (00 minutes)' /> | |
<param name='15' doc='Timezone offset (15 minutes)' /> | |
<param name='30' doc='Timezone offset (30 minutes)' /> | |
<param name='45' doc='Timezone offset (45 minutes)' /> | |
<param name='<0-2>' doc='DST offset (hours)' /> | |
</params> | |
</command> | |
<command id='no timezone'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='timezone' doc='Disable network timezone override, use system tz' /> | |
</params> | |
</command> | |
<command id='periodic location update <6-1530>'> | |
<params> | |
<param name='periodic' doc='Periodic Location Updating Interval' /> | |
<param name='location' doc='Periodic Location Updating Interval' /> | |
<param name='update' doc='Periodic Location Updating Interval' /> | |
<param name='<6-1530>' doc='Periodic Location Updating Interval in Minutes' /> | |
</params> | |
</command> | |
<command id='no periodic location update'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='periodic' doc='Periodic Location Updating Interval' /> | |
<param name='location' doc='Periodic Location Updating Interval' /> | |
<param name='update' doc='Periodic Location Updating Interval' /> | |
</params> | |
</command> | |
<command id='dyn_ts_allow_tch_f (0|1)'> | |
<params> | |
<param name='dyn_ts_allow_tch_f' doc='Allow or disallow allocating TCH/F on TCH_F_TCH_H_PDCH timeslots' /> | |
<param name='0' doc='Disallow TCH/F on TCH_F_TCH_H_PDCH (default)' /> | |
<param name='1' doc='Allow TCH/F on TCH_F_TCH_H_PDCH' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-msc'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='assign-tmsi'> | |
<params> | |
<param name='assign-tmsi' doc='Assign TMSI during Location Updating.' /> | |
</params> | |
</command> | |
<command id='no assign-tmsi'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='assign-tmsi' doc='Assign TMSI during Location Updating.' /> | |
</params> | |
</command> | |
<command id='cs7-instance-a <0-15>'> | |
<params> | |
<param name='cs7-instance-a' doc='Set SS7 to be used by the A-Interface.' /> | |
<param name='<0-15>' doc='SS7 instance reference number' /> | |
</params> | |
</command> | |
<command id='cs7-instance-iu <0-15>'> | |
<params> | |
<param name='cs7-instance-iu' doc='Set SS7 to be used by the Iu-Interface.' /> | |
<param name='<0-15>' doc='SS7 instance reference number' /> | |
</params> | |
</command> | |
<command id='mgcpgw local-ip A.B.C.D'> | |
<params> | |
<param name='mgcpgw' doc='MGCP gateway configuration for RTP streams' /> | |
<param name='local-ip' doc='local bind to connect to MGCP gateway with' /> | |
<param name='A.B.C.D' doc='local bind IP address' /> | |
</params> | |
</command> | |
<command id='mgcpgw local-port <0-65535>'> | |
<params> | |
<param name='mgcpgw' doc='MGCP gateway configuration for RTP streams' /> | |
<param name='local-port' doc='local bind to connect to MGCP gateway with' /> | |
<param name='<0-65535>' doc='local bind port' /> | |
</params> | |
</command> | |
<command id='mgcpgw remote-ip A.B.C.D'> | |
<params> | |
<param name='mgcpgw' doc='MGCP gateway configuration for RTP streams' /> | |
<param name='remote-ip' doc='remote bind to connect to MGCP gateway with' /> | |
<param name='A.B.C.D' doc='remote bind IP address' /> | |
</params> | |
</command> | |
<command id='mgcpgw remote-port <0-65535>'> | |
<params> | |
<param name='mgcpgw' doc='MGCP gateway configuration for RTP streams' /> | |
<param name='remote-port' doc='remote bind to connect to MGCP gateway with' /> | |
<param name='<0-65535>' doc='remote bind port' /> | |
</params> | |
</command> | |
<command id='mgcpgw endpoint-range <1-65534> <1-65534>'> | |
<params> | |
<param name='mgcpgw' doc='MGCP gateway configuration for RTP streams' /> | |
<param name='endpoint-range' doc='usable range of endpoint identifiers' /> | |
<param name='<1-65534>' doc='set first useable endpoint identifier' /> | |
<param name='<1-65534>' doc='set the last useable endpoint identifier' /> | |
</params> | |
</command> | |
<command id='mgcpgw bts-base <0-65534>'> | |
<params> | |
<param name='mgcpgw' doc='MGCP gateway configuration for RTP streams' /> | |
<param name='bts-base' doc='First UDP port allocated for the BTS side' /> | |
<param name='<0-65534>' doc='UDP Port number' /> | |
</params> | |
</command> | |
<command id='iu rab-assign-addr-enc (x213|v4raw)'> | |
<params> | |
<param name='iu' doc='Iu interface protocol options' /> | |
<param name='rab-assign-addr-enc' doc='Choose RAB Assignment's Transport Layer Address encoding' /> | |
<param name='x213' doc='ITU-T X.213 compliant address encoding (default)' /> | |
<param name='v4raw' doc='32bit length raw IPv4 address (for ip.access nano3G)' /> | |
</params> | |
</command> | |
<command id='asn1 debug (1|0)'> | |
<params> | |
<param name='asn1' doc='ASN.1 settings' /> | |
<param name='debug' doc='Enable ASN.1 debug messages' /> | |
<param name='1' doc='Log ASN.1 debug messages to stderr' /> | |
<param name='0' doc='Do not log ASN.1 debug messages to stderr' /> | |
</params> | |
</command> | |
<command id='asn1 xer-print (1|0)'> | |
<params> | |
<param name='asn1' doc='ASN.1 settings' /> | |
<param name='xer-print' doc='Log human readable representations of all ASN.1 messages to stderr' /> | |
<param name='1' doc='Log XML representation of all ASN.1 messages to stderr' /> | |
<param name='0' doc='Do not log decoded ASN.1 messages to stderr' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-mncc-int'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='default-codec tch-f (fr|efr|amr)'> | |
<params> | |
<param name='default-codec' doc='Set default codec' /> | |
<param name='tch-f' doc='Codec for TCH/F' /> | |
<param name='fr' doc='Full-Rate' /> | |
<param name='efr' doc='Enhanced Full-Rate' /> | |
<param name='amr' doc='Adaptive Multi-Rate' /> | |
</params> | |
</command> | |
<command id='default-codec tch-h (hr|amr)'> | |
<params> | |
<param name='default-codec' doc='Set default codec' /> | |
<param name='tch-h' doc='Codec for TCH/H' /> | |
<param name='hr' doc='Half-Rate' /> | |
<param name='amr' doc='Adaptive Multi-Rate' /> | |
</params> | |
</command> | |
<command id='meas-feed destination ADDR <0-65535>'> | |
<params> | |
<param name='meas-feed' doc='Measurement export related' /> | |
<param name='destination' doc='destination' /> | |
<param name='ADDR' doc='address or hostname' /> | |
<param name='<0-65535>' doc='port number' /> | |
</params> | |
</command> | |
<command id='meas-feed scenario NAME'> | |
<params> | |
<param name='meas-feed' doc='Measurement export related' /> | |
<param name='scenario' doc='scenario' /> | |
<param name='NAME' doc='Name up to 31 characters included in report' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-smpp'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='smpp-first'> | |
<params> | |
<param name='smpp-first' doc='Try SMPP routes before the subscriber DB' /> | |
</params> | |
</command> | |
<command id='no smpp-first'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='smpp-first' doc='Try SMPP before routes before the subscriber DB' /> | |
</params> | |
</command> | |
<command id='local-tcp-port <1-65535>'> | |
<params> | |
<param name='local-tcp-port' doc='Set the local TCP port on which we listen for SMPP' /> | |
<param name='<1-65535>' doc='TCP port number' /> | |
</params> | |
</command> | |
<command id='local-tcp-ip A.B.C.D <1-65535>'> | |
<params> | |
<param name='local-tcp-ip' doc='Set the local IP address and TCP port on which we listen for SMPP' /> | |
<param name='A.B.C.D' doc='Local IP address' /> | |
<param name='<1-65535>' doc='TCP port number' /> | |
</params> | |
</command> | |
<command id='system-id ID'> | |
<params> | |
<param name='system-id' doc='Set the System ID of this SMSC' /> | |
<param name='ID' doc='Alphanumeric SMSC System ID' /> | |
</params> | |
</command> | |
<command id='policy (accept-all|closed)'> | |
<params> | |
<param name='policy' doc='Set the authentication policy of this SMSC' /> | |
<param name='accept-all' doc='Accept all SMPP connections independeint of system ID / passwd' /> | |
<param name='closed' doc='Accept only SMPP connections from ESMEs explicitly configured' /> | |
</params> | |
</command> | |
<command id='esme NAME'> | |
<params> | |
<param name='esme' doc='Configure a particular ESME' /> | |
<param name='NAME' doc='Alphanumeric System ID of the ESME to be configured' /> | |
</params> | |
</command> | |
<command id='no esme NAME'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='esme' doc='Remove ESME configuration' /> | |
<param name='NAME' doc='Alphanumeric System ID of the ESME to be removed' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-smpp-esme'> | |
<command id='help'> | |
<params> | |
<param name='help' doc='Description of the interactive help system' /> | |
</params> | |
</command> | |
<command id='list'> | |
<params> | |
<param name='list' doc='Print command list' /> | |
</params> | |
</command> | |
<command id='write terminal'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='terminal' doc='Write to terminal' /> | |
</params> | |
</command> | |
<command id='write file'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='file' doc='Write to configuration file' /> | |
</params> | |
</command> | |
<command id='write memory'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
<param name='memory' doc='Write configuration to the file (same as write file)' /> | |
</params> | |
</command> | |
<command id='write'> | |
<params> | |
<param name='write' doc='Write running configuration to memory, network, or terminal' /> | |
</params> | |
</command> | |
<command id='show running-config'> | |
<params> | |
<param name='show' doc='Show running system information' /> | |
<param name='running-config' doc='running configuration' /> | |
</params> | |
</command> | |
<command id='exit'> | |
<params> | |
<param name='exit' doc='Exit current mode and down to previous mode' /> | |
</params> | |
</command> | |
<command id='end'> | |
<params> | |
<param name='end' doc='End current mode and change to enable mode.' /> | |
</params> | |
</command> | |
<command id='password PASSWORD'> | |
<params> | |
<param name='password' doc='Set the password for this ESME' /> | |
<param name='PASSWORD' doc='Alphanumeric password string' /> | |
</params> | |
</command> | |
<command id='no password'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='password' doc='Remove the password for this ESME' /> | |
</params> | |
</command> | |
<command id='route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX'> | |
<params> | |
<param name='route' doc='Configure a route for MO-SMS to be sent to this ESME' /> | |
<param name='prefix' doc='Prefix-match route' /> | |
<param name='unknown' doc='Unknown type-of-number' /> | |
<param name='international' doc='International type-of-number' /> | |
<param name='national' doc='National type-of-number' /> | |
<param name='network' doc='Network specific type-of-number' /> | |
<param name='subscriber' doc='Subscriber type-of-number' /> | |
<param name='alpha' doc='Alphanumeric type-of-number' /> | |
<param name='abbrev' doc='Abbreviated type-of-number' /> | |
<param name='unknown' doc='Unknown numbering plan' /> | |
<param name='isdn' doc='ISDN (E.164) numbering plan' /> | |
<param name='x121' doc='X.121 numbering plan' /> | |
<param name='f69' doc='F.69 numbering plan' /> | |
<param name='e212' doc='E.212 numbering plan' /> | |
<param name='national' doc='National numbering plan' /> | |
<param name='private' doc='Private numbering plan' /> | |
<param name='ermes' doc='ERMES numbering plan' /> | |
<param name='ip' doc='IP numbering plan' /> | |
<param name='wap' doc='WAP numbeing plan' /> | |
<param name='PREFIX' doc='Destination number prefix' /> | |
</params> | |
</command> | |
<command id='no route prefix (unknown|international|national|network|subscriber|alpha|abbrev) (unknown|isdn|x121|f69|e212|national|private|ermes|ip|wap) PREFIX'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='route' doc='Configure a route for MO-SMS to be sent to this ESME' /> | |
<param name='prefix' doc='Prefix-match route' /> | |
<param name='unknown' doc='Unknown type-of-number' /> | |
<param name='international' doc='International type-of-number' /> | |
<param name='national' doc='National type-of-number' /> | |
<param name='network' doc='Network specific type-of-number' /> | |
<param name='subscriber' doc='Subscriber type-of-number' /> | |
<param name='alpha' doc='Alphanumeric type-of-number' /> | |
<param name='abbrev' doc='Abbreviated type-of-number' /> | |
<param name='unknown' doc='Unknown numbering plan' /> | |
<param name='isdn' doc='ISDN (E.164) numbering plan' /> | |
<param name='x121' doc='X.121 numbering plan' /> | |
<param name='f69' doc='F.69 numbering plan' /> | |
<param name='e212' doc='E.212 numbering plan' /> | |
<param name='national' doc='National numbering plan' /> | |
<param name='private' doc='Private numbering plan' /> | |
<param name='ermes' doc='ERMES numbering plan' /> | |
<param name='ip' doc='IP numbering plan' /> | |
<param name='wap' doc='WAP numbeing plan' /> | |
<param name='PREFIX' doc='Destination number prefix' /> | |
</params> | |
</command> | |
<command id='default-route'> | |
<params> | |
<param name='default-route' doc='Set this ESME as default-route for all SMS to unknown destinations' /> | |
</params> | |
</command> | |
<command id='no default-route'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='default-route' doc='Remove this ESME as default-route for all SMS to unknown destinations' /> | |
</params> | |
</command> | |
<command id='deliver-src-imsi'> | |
<params> | |
<param name='deliver-src-imsi' doc='Enable the use of IMSI as source address in DELIVER' /> | |
</params> | |
</command> | |
<command id='no deliver-src-imsi'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='deliver-src-imsi' doc='Disable the use of IMSI as source address in DELIVER' /> | |
</params> | |
</command> | |
<command id='osmocom-extensions'> | |
<params> | |
<param name='osmocom-extensions' doc='Enable the use of Osmocom SMPP Extensions for this ESME' /> | |
</params> | |
</command> | |
<command id='no osmocom-extensions'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='osmocom-extensions' doc='Disable the use of Osmocom SMPP Extensions for this ESME' /> | |
</params> | |
</command> | |
<command id='dcs-transparent'> | |
<params> | |
<param name='dcs-transparent' doc='Enable the transparent pass-through of TP-DCS to SMPP DataCoding' /> | |
</params> | |
</command> | |
<command id='no dcs-transparent'> | |
<params> | |
<param name='no' doc='Negate a command or set its defaults' /> | |
<param name='dcs-transparent' doc='Disable the transparent pass-through of TP-DCS to SMPP DataCoding' /> | |
</params> | |
</command> | |
</node> | |
<node id='config-hlr'> | |
<command id='remote-ip A.B.C.D'> | |
<params> | |
<param name='remote-ip' doc='Remote GSUP address of the HLR' /> | |
<param name='A.B.C.D' doc='Remote GSUP address (default: 127.0.0.1)' /> | |
</params> | |
</command> | |
<command id='remote-port <1-65535>'> | |
<params> | |
<param name='remote-port' doc='Remote GSUP port of the HLR' /> | |
<param name='<1-65535>' doc='Remote GSUP port (default: MSC_HLR_REMOTE_PORT_DEFAULT)' /> | |
</params> | |
</command> | |
</node> | |
</vtydoc> |