| Harald Welte | a0d9db9 | 2011-07-01 21:28:10 +0200 | [diff] [blame] | 1 | ! |
| 2 | ! OsmoBSC (0.9.14+gitr1+3d331c0062bb0c9694dbd4d1eab7adc58138c3ae) configuration saved from vty |
| 3 | !! |
| 4 | password foo |
| 5 | ! |
| 6 | log stderr |
| 7 | logging color 1 |
| 8 | logging timestamp 0 |
| 9 | logging level all everything |
| 10 | logging level rll notice |
| 11 | logging level cc notice |
| 12 | logging level mm notice |
| 13 | logging level rr notice |
| 14 | logging level rsl notice |
| 15 | logging level nm info |
| 16 | logging level mncc notice |
| 17 | logging level sms notice |
| 18 | logging level pag notice |
| 19 | logging level meas notice |
| 20 | logging level mi notice |
| 21 | logging level mib notice |
| 22 | logging level mux notice |
| 23 | logging level inp notice |
| 24 | logging level sccp notice |
| 25 | logging level msc notice |
| 26 | logging level mgcp notice |
| 27 | logging level ho notice |
| 28 | logging level db notice |
| 29 | logging level ref notice |
| 30 | logging level gprs debug |
| 31 | logging level ns info |
| 32 | logging level bssgp debug |
| 33 | logging level llc debug |
| 34 | logging level sndcp debug |
| 35 | logging level nat notice |
| 36 | logging level lglobal notice |
| 37 | logging level llapdm notice |
| 38 | ! |
| 39 | line vty |
| 40 | no login |
| 41 | ! |
| 42 | network |
| 43 | network country code 1 |
| 44 | mobile network code 1 |
| 45 | short name OsmoBSC |
| 46 | long name OsmoBSC |
| 47 | auth policy closed |
| 48 | location updating reject cause 13 |
| 49 | encryption a5 0 |
| 50 | neci 1 |
| 51 | paging any use tch 0 |
| 52 | rrlp mode none |
| 53 | mm info 1 |
| 54 | handover 0 |
| 55 | handover window rxlev averaging 10 |
| 56 | handover window rxqual averaging 1 |
| 57 | handover window rxlev neighbor averaging 10 |
| 58 | handover power budget interval 6 |
| 59 | handover power budget hysteresis 3 |
| 60 | handover maximum distance 9999 |
| 61 | timer t3101 10 |
| 62 | timer t3103 0 |
| 63 | timer t3105 0 |
| 64 | timer t3107 0 |
| 65 | timer t3109 0 |
| 66 | timer t3111 0 |
| 67 | timer t3113 60 |
| 68 | timer t3115 0 |
| 69 | timer t3117 0 |
| 70 | timer t3119 0 |
| 71 | timer t3122 0 |
| 72 | timer t3141 0 |
| 73 | dtx-used 0 |
| 74 | subscriber-keep-in-ram 0 |
| 75 | bts 0 |
| 76 | type nanobts |
| 77 | band DCS1800 |
| 78 | cell_identity 0 |
| 79 | location_area_code 1 |
| 80 | training_sequence_code 7 |
| 81 | base_station_id_code 63 |
| 82 | ms max power 15 |
| 83 | cell reselection hysteresis 4 |
| 84 | rxlev access min 0 |
| 85 | channel allocator ascending |
| 86 | rach tx integer 9 |
| 87 | rach max transmission 7 |
| 88 | ip.access unit_id 0 0 |
| 89 | oml ip.access stream_id 255 |
| 90 | neighbor-list mode manual-si5 |
| 91 | neighbor-list add arfcn 100 |
| 92 | neighbor-list add arfcn 200 |
| 93 | si5 neighbor-list add arfcn 10 |
| 94 | si5 neighbor-list add arfcn 20 |
| 95 | gprs mode none |
| 96 | trx 0 |
| 97 | rf_locked 0 |
| 98 | arfcn 871 |
| 99 | nominal power 23 |
| 100 | max_power_red 20 |
| 101 | rsl e1 tei 0 |
| 102 | timeslot 0 |
| 103 | phys_chan_config CCCH+SDCCH4 |
| 104 | hopping enabled 0 |
| 105 | timeslot 1 |
| 106 | phys_chan_config TCH/F |
| 107 | hopping enabled 0 |
| 108 | timeslot 2 |
| 109 | phys_chan_config TCH/F |
| 110 | hopping enabled 0 |
| 111 | timeslot 3 |
| 112 | phys_chan_config TCH/F |
| 113 | hopping enabled 0 |
| 114 | timeslot 4 |
| 115 | phys_chan_config TCH/F |
| 116 | hopping enabled 0 |
| 117 | timeslot 5 |
| 118 | phys_chan_config TCH/F |
| 119 | hopping enabled 0 |
| 120 | timeslot 6 |
| 121 | phys_chan_config TCH/F |
| 122 | hopping enabled 0 |
| 123 | timeslot 7 |
| 124 | phys_chan_config TCH/F |
| 125 | hopping enabled 0 |
| 126 | msc |
| 127 | ip.access rtp-base 4000 |
| 128 | timeout-ping 20 |
| 129 | timeout-pong 5 |
| 130 | mid-call-timeout 0 |
| 131 | dest 192.168.100.11 6666 0 |