Philipp Maier | 0415de7 | 2017-12-11 18:48:34 +0100 | [diff] [blame^] | 1 | <vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
|
| 2 | <node id='Password'>
|
| 3 | </node>
|
| 4 | <node id='_1'>
|
| 5 | <command id='show version'>
|
| 6 | <params>
|
| 7 | <param name='show' doc='Show running system information' />
|
| 8 | <param name='version' doc='Displays program version' />
|
| 9 | </params>
|
| 10 | </command>
|
| 11 | <command id='show online-help'>
|
| 12 | <params>
|
| 13 | <param name='show' doc='Show running system information' />
|
| 14 | <param name='online-help' doc='Online help' />
|
| 15 | </params>
|
| 16 | </command>
|
| 17 | <command id='list'>
|
| 18 | <params>
|
| 19 | <param name='list' doc='Print command list' />
|
| 20 | </params>
|
| 21 | </command>
|
| 22 | <command id='exit'>
|
| 23 | <params>
|
| 24 | <param name='exit' doc='Exit current mode and down to previous mode' />
|
| 25 | </params>
|
| 26 | </command>
|
| 27 | <command id='help'>
|
| 28 | <params>
|
| 29 | <param name='help' doc='Description of the interactive help system' />
|
| 30 | </params>
|
| 31 | </command>
|
| 32 | <command id='enable'>
|
| 33 | <params>
|
| 34 | <param name='enable' doc='Turn on privileged mode command' />
|
| 35 | </params>
|
| 36 | </command>
|
| 37 | <command id='terminal length <0-512>'>
|
| 38 | <params>
|
| 39 | <param name='terminal' doc='Set terminal line parameters' />
|
| 40 | <param name='length' doc='Set number of lines on a screen' />
|
| 41 | <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
|
| 42 | </params>
|
| 43 | </command>
|
| 44 | <command id='terminal no length'>
|
| 45 | <params>
|
| 46 | <param name='terminal' doc='Set terminal line parameters' />
|
| 47 | <param name='no' doc='Negate a command or set its defaults' />
|
| 48 | <param name='length' doc='Set number of lines on a screen' />
|
| 49 | </params>
|
| 50 | </command>
|
| 51 | <command id='echo .MESSAGE'>
|
| 52 | <params>
|
| 53 | <param name='echo' doc='Echo a message back to the vty' />
|
| 54 | <param name='.MESSAGE' doc='The message to echo' />
|
| 55 | </params>
|
| 56 | </command>
|
| 57 | <command id='who'>
|
| 58 | <params>
|
| 59 | <param name='who' doc='Display who is on vty' />
|
| 60 | </params>
|
| 61 | </command>
|
| 62 | <command id='show history'>
|
| 63 | <params>
|
| 64 | <param name='show' doc='Show running system information' />
|
| 65 | <param name='history' doc='Display the session command history' />
|
| 66 | </params>
|
| 67 | </command>
|
| 68 | <command id='logging enable'>
|
| 69 | <params>
|
| 70 | <param name='logging' doc='Configure log message to this terminal' />
|
| 71 | <param name='enable' doc='Enables logging to this vty' />
|
| 72 | </params>
|
| 73 | </command>
|
| 74 | <command id='logging disable'>
|
| 75 | <params>
|
| 76 | <param name='logging' doc='Configure log message to this terminal' />
|
| 77 | <param name='disable' doc='Disables logging to this vty' />
|
| 78 | </params>
|
| 79 | </command>
|
| 80 | <command id='logging filter all (0|1)'>
|
| 81 | <params>
|
| 82 | <param name='logging' doc='Configure log message to this terminal' />
|
| 83 | <param name='filter' doc='Filter log messages' />
|
| 84 | <param name='all' doc='Do you want to log all messages?' />
|
| 85 | <param name='0' doc='Only print messages matched by other filters' />
|
| 86 | <param name='1' doc='Bypass filter and print all messages' />
|
| 87 | </params>
|
| 88 | </command>
|
| 89 | <command id='logging color (0|1)'>
|
| 90 | <params>
|
| 91 | <param name='logging' doc='Configure log message to this terminal' />
|
| 92 | <param name='color' doc='Configure color-printing for log messages' />
|
| 93 | <param name='0' doc='Don't use color for printing messages' />
|
| 94 | <param name='1' doc='Use color for printing messages' />
|
| 95 | </params>
|
| 96 | </command>
|
| 97 | <command id='logging timestamp (0|1)'>
|
| 98 | <params>
|
| 99 | <param name='logging' doc='Configure log message to this terminal' />
|
| 100 | <param name='timestamp' doc='Configure log message timestamping' />
|
| 101 | <param name='0' doc='Don't prefix each log message' />
|
| 102 | <param name='1' doc='Prefix each log message with current timestamp' />
|
| 103 | </params>
|
| 104 | </command>
|
| 105 | <command id='logging print extended-timestamp (0|1)'>
|
| 106 | <params>
|
| 107 | <param name='logging' doc='Configure log message to this terminal' />
|
| 108 | <param name='print' doc='Log output settings' />
|
| 109 | <param name='extended-timestamp' doc='Configure log message timestamping' />
|
| 110 | <param name='0' doc='Don't prefix each log message' />
|
| 111 | <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
|
| 112 | </params>
|
| 113 | </command>
|
| 114 | <command id='logging print category (0|1)'>
|
| 115 | <params>
|
| 116 | <param name='logging' doc='Configure log message to this terminal' />
|
| 117 | <param name='print' doc='Log output settings' />
|
| 118 | <param name='category' doc='Configure log message' />
|
| 119 | <param name='0' doc='Don't prefix each log message' />
|
| 120 | <param name='1' doc='Prefix each log message with category/subsystem name' />
|
| 121 | </params>
|
| 122 | </command>
|
| 123 | <command id='logging set-log-mask MASK'>
|
| 124 | <params>
|
| 125 | <param name='logging' doc='Configure log message to this terminal' />
|
| 126 | <param name='set-log-mask' doc='Set the logmask of this logging target' />
|
| 127 | <param name='MASK' doc='The logmask to use' />
|
| 128 | </params>
|
| 129 | </command>
|
| 130 | <command id='logging set log mask MASK'>
|
| 131 | <params>
|
| 132 | <param name='logging' doc='Configure log message to this terminal' />
|
| 133 | <param name='set' doc='Decide which categories to output.' />
|
| 134 | <param name='log' doc='Log commands' />
|
| 135 | <param name='mask' doc='Mask commands' />
|
| 136 | <param name='MASK' doc='The logmask to use' />
|
| 137 | </params>
|
| 138 | </command>
|
| 139 | <command id='logging level (all|rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>
|
| 140 | <params>
|
| 141 | <param name='logging' doc='Configure log message to this terminal' />
|
| 142 | <param name='level' doc='Set the log level for a specified category' />
|
| 143 | <param name='all' doc='Global setting for all subsystems' />
|
| 144 | <param name='rtp' doc='RTP stream handling' />
|
| 145 | <param name='lglobal' doc='Library-internal global log family' />
|
| 146 | <param name='llapd' doc='LAPD in libosmogsm' />
|
| 147 | <param name='linp' doc='A-bis Intput Subsystem' />
|
| 148 | <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
|
| 149 | <param name='lmi' doc='A-bis Input Driver for Signalling' />
|
| 150 | <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
|
| 151 | <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
|
| 152 | <param name='lctrl' doc='Control Interface' />
|
| 153 | <param name='lgtp' doc='GPRS GTP library' />
|
| 154 | <param name='lstats' doc='Statistics messages and logging' />
|
| 155 | <param name='lgsup' doc='Generic Subscriber Update Protocol' />
|
| 156 | <param name='loap' doc='Osmocom Authentication Protocol' />
|
| 157 | <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
|
| 158 | <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
|
| 159 | <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
|
| 160 | <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
|
| 161 | <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
|
| 162 | <param name='everything' doc='Don't use. It doesn't log anything' />
|
| 163 | <param name='debug' doc='Log debug messages and higher levels' />
|
| 164 | <param name='info' doc='Log informational messages and higher levels' />
|
| 165 | <param name='notice' doc='Log noticeable messages and higher levels' />
|
| 166 | <param name='error' doc='Log error messages and higher levels' />
|
| 167 | <param name='fatal' doc='Log only fatal messages' />
|
| 168 | </params>
|
| 169 | </command>
|
| 170 | <command id='show logging vty'>
|
| 171 | <params>
|
| 172 | <param name='show' doc='Show running system information' />
|
| 173 | <param name='logging' doc='Show current logging configuration' />
|
| 174 | <param name='vty' doc='Show current logging configuration for this vty' />
|
| 175 | </params>
|
| 176 | </command>
|
| 177 | <command id='show alarms'>
|
| 178 | <params>
|
| 179 | <param name='show' doc='Show running system information' />
|
| 180 | <param name='alarms' doc='Show current logging configuration' />
|
| 181 | </params>
|
| 182 | </command>
|
| 183 | <command id='show stats'>
|
| 184 | <params>
|
| 185 | <param name='show' doc='Show running system information' />
|
| 186 | <param name='stats' doc='Show statistical values' />
|
| 187 | </params>
|
| 188 | </command>
|
| 189 | <command id='show stats level (global|peer|subscriber)'>
|
| 190 | <params>
|
| 191 | <param name='show' doc='Show running system information' />
|
| 192 | <param name='stats' doc='Show statistical values' />
|
| 193 | <param name='level' doc='Set the maximum group level' />
|
| 194 | <param name='global' doc='Show global groups only' />
|
| 195 | <param name='peer' doc='Show global and network peer related groups' />
|
| 196 | <param name='subscriber' doc='Show global, peer, and subscriber groups' />
|
| 197 | </params>
|
| 198 | </command>
|
| 199 | <command id='show asciidoc counters'>
|
| 200 | <params>
|
| 201 | <param name='show' doc='Show running system information' />
|
| 202 | <param name='asciidoc' doc='Asciidoc generation' />
|
| 203 | <param name='counters' doc='Generate table of all registered counters' />
|
| 204 | </params>
|
| 205 | </command>
|
| 206 | <command id='show mgcp [stats]'>
|
| 207 | <params>
|
| 208 | <param name='show' doc='Show running system information' />
|
| 209 | <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
|
| 210 | <param name='[stats]' doc='Include Statistics' />
|
| 211 | </params>
|
| 212 | </command>
|
| 213 | </node>
|
| 214 | <node id='Password_2'>
|
| 215 | </node>
|
| 216 | <node id='_2'>
|
| 217 | <command id='help'>
|
| 218 | <params>
|
| 219 | <param name='help' doc='Description of the interactive help system' />
|
| 220 | </params>
|
| 221 | </command>
|
| 222 | <command id='list'>
|
| 223 | <params>
|
| 224 | <param name='list' doc='Print command list' />
|
| 225 | </params>
|
| 226 | </command>
|
| 227 | <command id='write terminal'>
|
| 228 | <params>
|
| 229 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 230 | <param name='terminal' doc='Write to terminal' />
|
| 231 | </params>
|
| 232 | </command>
|
| 233 | <command id='write file'>
|
| 234 | <params>
|
| 235 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 236 | <param name='file' doc='Write to configuration file' />
|
| 237 | </params>
|
| 238 | </command>
|
| 239 | <command id='write memory'>
|
| 240 | <params>
|
| 241 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 242 | <param name='memory' doc='Write configuration to the file (same as write file)' />
|
| 243 | </params>
|
| 244 | </command>
|
| 245 | <command id='write'>
|
| 246 | <params>
|
| 247 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 248 | </params>
|
| 249 | </command>
|
| 250 | <command id='show running-config'>
|
| 251 | <params>
|
| 252 | <param name='show' doc='Show running system information' />
|
| 253 | <param name='running-config' doc='running configuration' />
|
| 254 | </params>
|
| 255 | </command>
|
| 256 | <command id='exit'>
|
| 257 | <params>
|
| 258 | <param name='exit' doc='Exit current mode and down to previous mode' />
|
| 259 | </params>
|
| 260 | </command>
|
| 261 | <command id='disable'>
|
| 262 | <params>
|
| 263 | <param name='disable' doc='Turn off privileged mode command' />
|
| 264 | </params>
|
| 265 | </command>
|
| 266 | <command id='configure terminal'>
|
| 267 | <params>
|
| 268 | <param name='configure' doc='Configuration from vty interface' />
|
| 269 | <param name='terminal' doc='Configuration terminal' />
|
| 270 | </params>
|
| 271 | </command>
|
| 272 | <command id='copy running-config startup-config'>
|
| 273 | <params>
|
| 274 | <param name='copy' doc='Copy configuration' />
|
| 275 | <param name='running-config' doc='Copy running config to... ' />
|
| 276 | <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
|
| 277 | </params>
|
| 278 | </command>
|
| 279 | <command id='show startup-config'>
|
| 280 | <params>
|
| 281 | <param name='show' doc='Show running system information' />
|
| 282 | <param name='startup-config' doc='Contentes of startup configuration' />
|
| 283 | </params>
|
| 284 | </command>
|
| 285 | <command id='show version'>
|
| 286 | <params>
|
| 287 | <param name='show' doc='Show running system information' />
|
| 288 | <param name='version' doc='Displays program version' />
|
| 289 | </params>
|
| 290 | </command>
|
| 291 | <command id='show online-help'>
|
| 292 | <params>
|
| 293 | <param name='show' doc='Show running system information' />
|
| 294 | <param name='online-help' doc='Online help' />
|
| 295 | </params>
|
| 296 | </command>
|
| 297 | <command id='terminal length <0-512>'>
|
| 298 | <params>
|
| 299 | <param name='terminal' doc='Set terminal line parameters' />
|
| 300 | <param name='length' doc='Set number of lines on a screen' />
|
| 301 | <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
|
| 302 | </params>
|
| 303 | </command>
|
| 304 | <command id='terminal no length'>
|
| 305 | <params>
|
| 306 | <param name='terminal' doc='Set terminal line parameters' />
|
| 307 | <param name='no' doc='Negate a command or set its defaults' />
|
| 308 | <param name='length' doc='Set number of lines on a screen' />
|
| 309 | </params>
|
| 310 | </command>
|
| 311 | <command id='echo .MESSAGE'>
|
| 312 | <params>
|
| 313 | <param name='echo' doc='Echo a message back to the vty' />
|
| 314 | <param name='.MESSAGE' doc='The message to echo' />
|
| 315 | </params>
|
| 316 | </command>
|
| 317 | <command id='who'>
|
| 318 | <params>
|
| 319 | <param name='who' doc='Display who is on vty' />
|
| 320 | </params>
|
| 321 | </command>
|
| 322 | <command id='show history'>
|
| 323 | <params>
|
| 324 | <param name='show' doc='Show running system information' />
|
| 325 | <param name='history' doc='Display the session command history' />
|
| 326 | </params>
|
| 327 | </command>
|
| 328 | <command id='terminal monitor'>
|
| 329 | <params>
|
| 330 | <param name='terminal' doc='Set terminal line parameters' />
|
| 331 | <param name='monitor' doc='Copy debug output to the current terminal line' />
|
| 332 | </params>
|
| 333 | </command>
|
| 334 | <command id='terminal no monitor'>
|
| 335 | <params>
|
| 336 | <param name='terminal' doc='Set terminal line parameters' />
|
| 337 | <param name='no' doc='Negate a command or set its defaults' />
|
| 338 | <param name='monitor' doc='Copy debug output to the current terminal line' />
|
| 339 | </params>
|
| 340 | </command>
|
| 341 | <command id='logging enable'>
|
| 342 | <params>
|
| 343 | <param name='logging' doc='Configure log message to this terminal' />
|
| 344 | <param name='enable' doc='Enables logging to this vty' />
|
| 345 | </params>
|
| 346 | </command>
|
| 347 | <command id='logging disable'>
|
| 348 | <params>
|
| 349 | <param name='logging' doc='Configure log message to this terminal' />
|
| 350 | <param name='disable' doc='Disables logging to this vty' />
|
| 351 | </params>
|
| 352 | </command>
|
| 353 | <command id='logging filter all (0|1)'>
|
| 354 | <params>
|
| 355 | <param name='logging' doc='Configure log message to this terminal' />
|
| 356 | <param name='filter' doc='Filter log messages' />
|
| 357 | <param name='all' doc='Do you want to log all messages?' />
|
| 358 | <param name='0' doc='Only print messages matched by other filters' />
|
| 359 | <param name='1' doc='Bypass filter and print all messages' />
|
| 360 | </params>
|
| 361 | </command>
|
| 362 | <command id='logging color (0|1)'>
|
| 363 | <params>
|
| 364 | <param name='logging' doc='Configure log message to this terminal' />
|
| 365 | <param name='color' doc='Configure color-printing for log messages' />
|
| 366 | <param name='0' doc='Don't use color for printing messages' />
|
| 367 | <param name='1' doc='Use color for printing messages' />
|
| 368 | </params>
|
| 369 | </command>
|
| 370 | <command id='logging timestamp (0|1)'>
|
| 371 | <params>
|
| 372 | <param name='logging' doc='Configure log message to this terminal' />
|
| 373 | <param name='timestamp' doc='Configure log message timestamping' />
|
| 374 | <param name='0' doc='Don't prefix each log message' />
|
| 375 | <param name='1' doc='Prefix each log message with current timestamp' />
|
| 376 | </params>
|
| 377 | </command>
|
| 378 | <command id='logging print extended-timestamp (0|1)'>
|
| 379 | <params>
|
| 380 | <param name='logging' doc='Configure log message to this terminal' />
|
| 381 | <param name='print' doc='Log output settings' />
|
| 382 | <param name='extended-timestamp' doc='Configure log message timestamping' />
|
| 383 | <param name='0' doc='Don't prefix each log message' />
|
| 384 | <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
|
| 385 | </params>
|
| 386 | </command>
|
| 387 | <command id='logging print category (0|1)'>
|
| 388 | <params>
|
| 389 | <param name='logging' doc='Configure log message to this terminal' />
|
| 390 | <param name='print' doc='Log output settings' />
|
| 391 | <param name='category' doc='Configure log message' />
|
| 392 | <param name='0' doc='Don't prefix each log message' />
|
| 393 | <param name='1' doc='Prefix each log message with category/subsystem name' />
|
| 394 | </params>
|
| 395 | </command>
|
| 396 | <command id='logging set-log-mask MASK'>
|
| 397 | <params>
|
| 398 | <param name='logging' doc='Configure log message to this terminal' />
|
| 399 | <param name='set-log-mask' doc='Set the logmask of this logging target' />
|
| 400 | <param name='MASK' doc='The logmask to use' />
|
| 401 | </params>
|
| 402 | </command>
|
| 403 | <command id='logging set log mask MASK'>
|
| 404 | <params>
|
| 405 | <param name='logging' doc='Configure log message to this terminal' />
|
| 406 | <param name='set' doc='Decide which categories to output.' />
|
| 407 | <param name='log' doc='Log commands' />
|
| 408 | <param name='mask' doc='Mask commands' />
|
| 409 | <param name='MASK' doc='The logmask to use' />
|
| 410 | </params>
|
| 411 | </command>
|
| 412 | <command id='logging level (all|rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>
|
| 413 | <params>
|
| 414 | <param name='logging' doc='Configure log message to this terminal' />
|
| 415 | <param name='level' doc='Set the log level for a specified category' />
|
| 416 | <param name='all' doc='Global setting for all subsystems' />
|
| 417 | <param name='rtp' doc='RTP stream handling' />
|
| 418 | <param name='lglobal' doc='Library-internal global log family' />
|
| 419 | <param name='llapd' doc='LAPD in libosmogsm' />
|
| 420 | <param name='linp' doc='A-bis Intput Subsystem' />
|
| 421 | <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
|
| 422 | <param name='lmi' doc='A-bis Input Driver for Signalling' />
|
| 423 | <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
|
| 424 | <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
|
| 425 | <param name='lctrl' doc='Control Interface' />
|
| 426 | <param name='lgtp' doc='GPRS GTP library' />
|
| 427 | <param name='lstats' doc='Statistics messages and logging' />
|
| 428 | <param name='lgsup' doc='Generic Subscriber Update Protocol' />
|
| 429 | <param name='loap' doc='Osmocom Authentication Protocol' />
|
| 430 | <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
|
| 431 | <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
|
| 432 | <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
|
| 433 | <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
|
| 434 | <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
|
| 435 | <param name='everything' doc='Don't use. It doesn't log anything' />
|
| 436 | <param name='debug' doc='Log debug messages and higher levels' />
|
| 437 | <param name='info' doc='Log informational messages and higher levels' />
|
| 438 | <param name='notice' doc='Log noticeable messages and higher levels' />
|
| 439 | <param name='error' doc='Log error messages and higher levels' />
|
| 440 | <param name='fatal' doc='Log only fatal messages' />
|
| 441 | </params>
|
| 442 | </command>
|
| 443 | <command id='show logging vty'>
|
| 444 | <params>
|
| 445 | <param name='show' doc='Show running system information' />
|
| 446 | <param name='logging' doc='Show current logging configuration' />
|
| 447 | <param name='vty' doc='Show current logging configuration for this vty' />
|
| 448 | </params>
|
| 449 | </command>
|
| 450 | <command id='show alarms'>
|
| 451 | <params>
|
| 452 | <param name='show' doc='Show running system information' />
|
| 453 | <param name='alarms' doc='Show current logging configuration' />
|
| 454 | </params>
|
| 455 | </command>
|
| 456 | <command id='show stats'>
|
| 457 | <params>
|
| 458 | <param name='show' doc='Show running system information' />
|
| 459 | <param name='stats' doc='Show statistical values' />
|
| 460 | </params>
|
| 461 | </command>
|
| 462 | <command id='show stats level (global|peer|subscriber)'>
|
| 463 | <params>
|
| 464 | <param name='show' doc='Show running system information' />
|
| 465 | <param name='stats' doc='Show statistical values' />
|
| 466 | <param name='level' doc='Set the maximum group level' />
|
| 467 | <param name='global' doc='Show global groups only' />
|
| 468 | <param name='peer' doc='Show global and network peer related groups' />
|
| 469 | <param name='subscriber' doc='Show global, peer, and subscriber groups' />
|
| 470 | </params>
|
| 471 | </command>
|
| 472 | <command id='show asciidoc counters'>
|
| 473 | <params>
|
| 474 | <param name='show' doc='Show running system information' />
|
| 475 | <param name='asciidoc' doc='Asciidoc generation' />
|
| 476 | <param name='counters' doc='Generate table of all registered counters' />
|
| 477 | </params>
|
| 478 | </command>
|
| 479 | <command id='show mgcp [stats]'>
|
| 480 | <params>
|
| 481 | <param name='show' doc='Show running system information' />
|
| 482 | <param name='mgcp' doc='Display information about the MGCP Media Gateway' />
|
| 483 | <param name='[stats]' doc='Include Statistics' />
|
| 484 | </params>
|
| 485 | </command>
|
| 486 | <command id='loop-endpoint <0-64> NAME (0|1)'>
|
| 487 | <params>
|
| 488 | <param name='loop-endpoint' doc='Loop a given endpoint' />
|
| 489 | <param name='<0-64>' doc='Trunk number' />
|
| 490 | <param name='NAME' doc='The name in hex of the endpoint' />
|
| 491 | <param name='0' doc='Disable the loop' />
|
| 492 | <param name='1' doc='Enable the loop' />
|
| 493 | </params>
|
| 494 | </command>
|
| 495 | <command id='tap-rtp <0-64> ENDPOINT CONN (in|out) A.B.C.D <0-65534>'>
|
| 496 | <params>
|
| 497 | <param name='tap-rtp' doc='Forward data on endpoint to a different system' />
|
| 498 | <param name='<0-64>' doc='Trunk number' />
|
| 499 | <param name='ENDPOINT' doc='The endpoint in hex' />
|
| 500 | <param name='CONN' doc='The connection id in hex' />
|
| 501 | <param name='in' doc='Forward incoming data' />
|
| 502 | <param name='out' doc='Forward leaving data' />
|
| 503 | <param name='A.B.C.D' doc='destination IP of the data' />
|
| 504 | <param name='<0-65534>' doc='destination port' />
|
| 505 | </params>
|
| 506 | </command>
|
| 507 | <command id='free-endpoint <0-64> NUMBER'>
|
| 508 | <params>
|
| 509 | <param name='free-endpoint' doc='Free the given endpoint' />
|
| 510 | <param name='<0-64>' doc='Trunk number' />
|
| 511 | <param name='NUMBER' doc='Endpoint number in hex.' />
|
| 512 | </params>
|
| 513 | </command>
|
| 514 | <command id='reset-endpoint <0-64> NUMBER'>
|
| 515 | <params>
|
| 516 | <param name='reset-endpoint' doc='Reset the given endpoint' />
|
| 517 | <param name='<0-64>' doc='Trunk number' />
|
| 518 | <param name='NUMBER' doc='Endpoint number in hex.' />
|
| 519 | </params>
|
| 520 | </command>
|
| 521 | <command id='reset-all-endpoints'>
|
| 522 | <params>
|
| 523 | <param name='reset-all-endpoints' doc='Reset all endpoints' />
|
| 524 | </params>
|
| 525 | </command>
|
| 526 | </node>
|
| 527 | <node id='config'>
|
| 528 | <command id='help'>
|
| 529 | <params>
|
| 530 | <param name='help' doc='Description of the interactive help system' />
|
| 531 | </params>
|
| 532 | </command>
|
| 533 | <command id='list'>
|
| 534 | <params>
|
| 535 | <param name='list' doc='Print command list' />
|
| 536 | </params>
|
| 537 | </command>
|
| 538 | <command id='write terminal'>
|
| 539 | <params>
|
| 540 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 541 | <param name='terminal' doc='Write to terminal' />
|
| 542 | </params>
|
| 543 | </command>
|
| 544 | <command id='write file'>
|
| 545 | <params>
|
| 546 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 547 | <param name='file' doc='Write to configuration file' />
|
| 548 | </params>
|
| 549 | </command>
|
| 550 | <command id='write memory'>
|
| 551 | <params>
|
| 552 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 553 | <param name='memory' doc='Write configuration to the file (same as write file)' />
|
| 554 | </params>
|
| 555 | </command>
|
| 556 | <command id='write'>
|
| 557 | <params>
|
| 558 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 559 | </params>
|
| 560 | </command>
|
| 561 | <command id='show running-config'>
|
| 562 | <params>
|
| 563 | <param name='show' doc='Show running system information' />
|
| 564 | <param name='running-config' doc='running configuration' />
|
| 565 | </params>
|
| 566 | </command>
|
| 567 | <command id='exit'>
|
| 568 | <params>
|
| 569 | <param name='exit' doc='Exit current mode and down to previous mode' />
|
| 570 | </params>
|
| 571 | </command>
|
| 572 | <command id='end'>
|
| 573 | <params>
|
| 574 | <param name='end' doc='End current mode and change to enable mode.' />
|
| 575 | </params>
|
| 576 | </command>
|
| 577 | <command id='hostname WORD'>
|
| 578 | <params>
|
| 579 | <param name='hostname' doc='Set system's network name' />
|
| 580 | <param name='WORD' doc='This system's network name' />
|
| 581 | </params>
|
| 582 | </command>
|
| 583 | <command id='no hostname [HOSTNAME]'>
|
| 584 | <params>
|
| 585 | <param name='no' doc='Negate a command or set its defaults' />
|
| 586 | <param name='hostname' doc='Reset system's network name' />
|
| 587 | <param name='[HOSTNAME]' doc='Host name of this router' />
|
| 588 | </params>
|
| 589 | </command>
|
| 590 | <command id='password (8|) WORD'>
|
| 591 | <params>
|
| 592 | <param name='password' doc='Assign the terminal connection password' />
|
| 593 | <param name='8' doc='Specifies a HIDDEN password will follow' />
|
| 594 | <param name='' doc='dummy string ' />
|
| 595 | <param name='WORD' doc='The HIDDEN line password string' />
|
| 596 | </params>
|
| 597 | </command>
|
| 598 | <command id='password LINE'>
|
| 599 | <params>
|
| 600 | <param name='password' doc='Assign the terminal connection password' />
|
| 601 | <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
|
| 602 | </params>
|
| 603 | </command>
|
| 604 | <command id='enable password (8|) WORD'>
|
| 605 | <params>
|
| 606 | <param name='enable' doc='Modify enable password parameters' />
|
| 607 | <param name='password' doc='Assign the privileged level password' />
|
| 608 | <param name='8' doc='Specifies a HIDDEN password will follow' />
|
| 609 | <param name='' doc='dummy string ' />
|
| 610 | <param name='WORD' doc='The HIDDEN 'enable' password string' />
|
| 611 | </params>
|
| 612 | </command>
|
| 613 | <command id='enable password LINE'>
|
| 614 | <params>
|
| 615 | <param name='enable' doc='Modify enable password parameters' />
|
| 616 | <param name='password' doc='Assign the privileged level password' />
|
| 617 | <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
|
| 618 | </params>
|
| 619 | </command>
|
| 620 | <command id='no enable password'>
|
| 621 | <params>
|
| 622 | <param name='no' doc='Negate a command or set its defaults' />
|
| 623 | <param name='enable' doc='Modify enable password parameters' />
|
| 624 | <param name='password' doc='Assign the privileged level password' />
|
| 625 | </params>
|
| 626 | </command>
|
| 627 | <command id='banner motd default'>
|
| 628 | <params>
|
| 629 | <param name='banner' doc='Set banner string' />
|
| 630 | <param name='motd' doc='Strings for motd' />
|
| 631 | <param name='default' doc='Default string' />
|
| 632 | </params>
|
| 633 | </command>
|
| 634 | <command id='banner motd file [FILE]'>
|
| 635 | <params>
|
| 636 | <param name='banner' doc='Set banner' />
|
| 637 | <param name='motd' doc='Banner for motd' />
|
| 638 | <param name='file' doc='Banner from a file' />
|
| 639 | <param name='[FILE]' doc='Filename' />
|
| 640 | </params>
|
| 641 | </command>
|
| 642 | <command id='no banner motd'>
|
| 643 | <params>
|
| 644 | <param name='no' doc='Negate a command or set its defaults' />
|
| 645 | <param name='banner' doc='Set banner string' />
|
| 646 | <param name='motd' doc='Strings for motd' />
|
| 647 | </params>
|
| 648 | </command>
|
| 649 | <command id='service terminal-length <0-512>'>
|
| 650 | <params>
|
| 651 | <param name='service' doc='Set up miscellaneous service' />
|
| 652 | <param name='terminal-length' doc='System wide terminal length configuration' />
|
| 653 | <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
|
| 654 | </params>
|
| 655 | </command>
|
| 656 | <command id='no service terminal-length [<0-512>]'>
|
| 657 | <params>
|
| 658 | <param name='no' doc='Negate a command or set its defaults' />
|
| 659 | <param name='service' doc='Set up miscellaneous service' />
|
| 660 | <param name='terminal-length' doc='System wide terminal length configuration' />
|
| 661 | <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
|
| 662 | </params>
|
| 663 | </command>
|
| 664 | <command id='line vty'>
|
| 665 | <params>
|
| 666 | <param name='line' doc='Configure a terminal line' />
|
| 667 | <param name='vty' doc='Virtual terminal' />
|
| 668 | </params>
|
| 669 | </command>
|
| 670 | <command id='service advanced-vty'>
|
| 671 | <params>
|
| 672 | <param name='service' doc='Set up miscellaneous service' />
|
| 673 | <param name='advanced-vty' doc='Enable advanced mode vty interface' />
|
| 674 | </params>
|
| 675 | </command>
|
| 676 | <command id='no service advanced-vty'>
|
| 677 | <params>
|
| 678 | <param name='no' doc='Negate a command or set its defaults' />
|
| 679 | <param name='service' doc='Set up miscellaneous service' />
|
| 680 | <param name='advanced-vty' doc='Enable advanced mode vty interface' />
|
| 681 | </params>
|
| 682 | </command>
|
| 683 | <command id='show history'>
|
| 684 | <params>
|
| 685 | <param name='show' doc='Show running system information' />
|
| 686 | <param name='history' doc='Display the session command history' />
|
| 687 | </params>
|
| 688 | </command>
|
| 689 | <command id='log stderr'>
|
| 690 | <params>
|
| 691 | <param name='log' doc='Configure logging sub-system' />
|
| 692 | <param name='stderr' doc='Logging via STDERR of the process' />
|
| 693 | </params>
|
| 694 | </command>
|
| 695 | <command id='no log stderr'>
|
| 696 | <params>
|
| 697 | <param name='no' doc='Negate a command or set its defaults' />
|
| 698 | <param name='log' doc='Configure logging sub-system' />
|
| 699 | <param name='stderr' doc='Logging via STDERR of the process' />
|
| 700 | </params>
|
| 701 | </command>
|
| 702 | <command id='log file .FILENAME'>
|
| 703 | <params>
|
| 704 | <param name='log' doc='Configure logging sub-system' />
|
| 705 | <param name='file' doc='Logging to text file' />
|
| 706 | <param name='.FILENAME' doc='Filename' />
|
| 707 | </params>
|
| 708 | </command>
|
| 709 | <command id='no log file .FILENAME'>
|
| 710 | <params>
|
| 711 | <param name='no' doc='Negate a command or set its defaults' />
|
| 712 | <param name='log' doc='Configure logging sub-system' />
|
| 713 | <param name='file' doc='Logging to text file' />
|
| 714 | <param name='.FILENAME' doc='Filename' />
|
| 715 | </params>
|
| 716 | </command>
|
| 717 | <command id='log alarms <2-32700>'>
|
| 718 | <params>
|
| 719 | <param name='log' doc='Configure logging sub-system' />
|
| 720 | <param name='alarms' doc='Logging alarms to osmo_strrb' />
|
| 721 | <param name='<2-32700>' doc='Maximum number of messages to log' />
|
| 722 | </params>
|
| 723 | </command>
|
| 724 | <command id='no log alarms'>
|
| 725 | <params>
|
| 726 | <param name='no' doc='Negate a command or set its defaults' />
|
| 727 | <param name='log' doc='Configure logging sub-system' />
|
| 728 | <param name='alarms' doc='Logging alarms to osmo_strrb' />
|
| 729 | </params>
|
| 730 | </command>
|
| 731 | <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
|
| 732 | <params>
|
| 733 | <param name='log' doc='Configure logging sub-system' />
|
| 734 | <param name='syslog' doc='Logging via syslog' />
|
| 735 | <param name='authpriv' doc='Security/authorization messages facility' />
|
| 736 | <param name='cron' doc='Clock daemon (cron/at) facility' />
|
| 737 | <param name='daemon' doc='General system daemon facility' />
|
| 738 | <param name='ftp' doc='Ftp daemon facility' />
|
| 739 | <param name='lpr' doc='Line printer facility' />
|
| 740 | <param name='mail' doc='Mail facility' />
|
| 741 | <param name='news' doc='News facility' />
|
| 742 | <param name='user' doc='Generic facility' />
|
| 743 | <param name='uucp' doc='UUCP facility' />
|
| 744 | </params>
|
| 745 | </command>
|
| 746 | <command id='log syslog local <0-7>'>
|
| 747 | <params>
|
| 748 | <param name='log' doc='Configure logging sub-system' />
|
| 749 | <param name='syslog' doc='Logging via syslog' />
|
| 750 | <param name='local' doc='Syslog LOCAL facility' />
|
| 751 | <param name='<0-7>' doc='Local facility number' />
|
| 752 | </params>
|
| 753 | </command>
|
| 754 | <command id='no log syslog'>
|
| 755 | <params>
|
| 756 | <param name='no' doc='Negate a command or set its defaults' />
|
| 757 | <param name='log' doc='Configure logging sub-system' />
|
| 758 | <param name='syslog' doc='Logging via syslog' />
|
| 759 | </params>
|
| 760 | </command>
|
| 761 | <command id='log gsmtap [HOSTNAME]'>
|
| 762 | <params>
|
| 763 | <param name='log' doc='Configure logging sub-system' />
|
| 764 | <param name='gsmtap' doc='Logging via GSMTAP' />
|
| 765 | <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
|
| 766 | </params>
|
| 767 | </command>
|
| 768 | <command id='stats reporter statsd'>
|
| 769 | <params>
|
| 770 | <param name='stats' doc='Configure stats sub-system' />
|
| 771 | <param name='reporter' doc='Configure a stats reporter' />
|
| 772 | <param name='statsd' doc='Report to a STATSD server' />
|
| 773 | </params>
|
| 774 | </command>
|
| 775 | <command id='no stats reporter statsd'>
|
| 776 | <params>
|
| 777 | <param name='no' doc='Negate a command or set its defaults' />
|
| 778 | <param name='stats' doc='Configure stats sub-system' />
|
| 779 | <param name='reporter' doc='Configure a stats reporter' />
|
| 780 | <param name='statsd' doc='Report to a STATSD server' />
|
| 781 | </params>
|
| 782 | </command>
|
| 783 | <command id='stats reporter log'>
|
| 784 | <params>
|
| 785 | <param name='stats' doc='Configure stats sub-system' />
|
| 786 | <param name='reporter' doc='Configure a stats reporter' />
|
| 787 | <param name='log' doc='Report to the logger' />
|
| 788 | </params>
|
| 789 | </command>
|
| 790 | <command id='no stats reporter log'>
|
| 791 | <params>
|
| 792 | <param name='no' doc='Negate a command or set its defaults' />
|
| 793 | <param name='stats' doc='Configure stats sub-system' />
|
| 794 | <param name='reporter' doc='Configure a stats reporter' />
|
| 795 | <param name='log' doc='Report to the logger' />
|
| 796 | </params>
|
| 797 | </command>
|
| 798 | <command id='stats interval <1-65535>'>
|
| 799 | <params>
|
| 800 | <param name='stats' doc='Configure stats sub-system' />
|
| 801 | <param name='interval' doc='Set the reporting interval' />
|
| 802 | <param name='<1-65535>' doc='Interval in seconds' />
|
| 803 | </params>
|
| 804 | </command>
|
| 805 | <command id='mgcp'>
|
| 806 | <params>
|
| 807 | <param name='mgcp' doc='Configure the MGCP' />
|
| 808 | </params>
|
| 809 | </command>
|
| 810 | </node>
|
| 811 | <node id='config-log'>
|
| 812 | <command id='help'>
|
| 813 | <params>
|
| 814 | <param name='help' doc='Description of the interactive help system' />
|
| 815 | </params>
|
| 816 | </command>
|
| 817 | <command id='list'>
|
| 818 | <params>
|
| 819 | <param name='list' doc='Print command list' />
|
| 820 | </params>
|
| 821 | </command>
|
| 822 | <command id='write terminal'>
|
| 823 | <params>
|
| 824 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 825 | <param name='terminal' doc='Write to terminal' />
|
| 826 | </params>
|
| 827 | </command>
|
| 828 | <command id='write file'>
|
| 829 | <params>
|
| 830 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 831 | <param name='file' doc='Write to configuration file' />
|
| 832 | </params>
|
| 833 | </command>
|
| 834 | <command id='write memory'>
|
| 835 | <params>
|
| 836 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 837 | <param name='memory' doc='Write configuration to the file (same as write file)' />
|
| 838 | </params>
|
| 839 | </command>
|
| 840 | <command id='write'>
|
| 841 | <params>
|
| 842 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 843 | </params>
|
| 844 | </command>
|
| 845 | <command id='show running-config'>
|
| 846 | <params>
|
| 847 | <param name='show' doc='Show running system information' />
|
| 848 | <param name='running-config' doc='running configuration' />
|
| 849 | </params>
|
| 850 | </command>
|
| 851 | <command id='exit'>
|
| 852 | <params>
|
| 853 | <param name='exit' doc='Exit current mode and down to previous mode' />
|
| 854 | </params>
|
| 855 | </command>
|
| 856 | <command id='end'>
|
| 857 | <params>
|
| 858 | <param name='end' doc='End current mode and change to enable mode.' />
|
| 859 | </params>
|
| 860 | </command>
|
| 861 | <command id='logging filter all (0|1)'>
|
| 862 | <params>
|
| 863 | <param name='logging' doc='Configure log message to this terminal' />
|
| 864 | <param name='filter' doc='Filter log messages' />
|
| 865 | <param name='all' doc='Do you want to log all messages?' />
|
| 866 | <param name='0' doc='Only print messages matched by other filters' />
|
| 867 | <param name='1' doc='Bypass filter and print all messages' />
|
| 868 | </params>
|
| 869 | </command>
|
| 870 | <command id='logging color (0|1)'>
|
| 871 | <params>
|
| 872 | <param name='logging' doc='Configure log message to this terminal' />
|
| 873 | <param name='color' doc='Configure color-printing for log messages' />
|
| 874 | <param name='0' doc='Don't use color for printing messages' />
|
| 875 | <param name='1' doc='Use color for printing messages' />
|
| 876 | </params>
|
| 877 | </command>
|
| 878 | <command id='logging timestamp (0|1)'>
|
| 879 | <params>
|
| 880 | <param name='logging' doc='Configure log message to this terminal' />
|
| 881 | <param name='timestamp' doc='Configure log message timestamping' />
|
| 882 | <param name='0' doc='Don't prefix each log message' />
|
| 883 | <param name='1' doc='Prefix each log message with current timestamp' />
|
| 884 | </params>
|
| 885 | </command>
|
| 886 | <command id='logging print extended-timestamp (0|1)'>
|
| 887 | <params>
|
| 888 | <param name='logging' doc='Configure log message to this terminal' />
|
| 889 | <param name='print' doc='Log output settings' />
|
| 890 | <param name='extended-timestamp' doc='Configure log message timestamping' />
|
| 891 | <param name='0' doc='Don't prefix each log message' />
|
| 892 | <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
|
| 893 | </params>
|
| 894 | </command>
|
| 895 | <command id='logging print category (0|1)'>
|
| 896 | <params>
|
| 897 | <param name='logging' doc='Configure log message to this terminal' />
|
| 898 | <param name='print' doc='Log output settings' />
|
| 899 | <param name='category' doc='Configure log message' />
|
| 900 | <param name='0' doc='Don't prefix each log message' />
|
| 901 | <param name='1' doc='Prefix each log message with category/subsystem name' />
|
| 902 | </params>
|
| 903 | </command>
|
| 904 | <command id='logging level (all|rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'>
|
| 905 | <params>
|
| 906 | <param name='logging' doc='Configure log message to this terminal' />
|
| 907 | <param name='level' doc='Set the log level for a specified category' />
|
| 908 | <param name='all' doc='Global setting for all subsystems' />
|
| 909 | <param name='rtp' doc='RTP stream handling' />
|
| 910 | <param name='lglobal' doc='Library-internal global log family' />
|
| 911 | <param name='llapd' doc='LAPD in libosmogsm' />
|
| 912 | <param name='linp' doc='A-bis Intput Subsystem' />
|
| 913 | <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
|
| 914 | <param name='lmi' doc='A-bis Input Driver for Signalling' />
|
| 915 | <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
|
| 916 | <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
|
| 917 | <param name='lctrl' doc='Control Interface' />
|
| 918 | <param name='lgtp' doc='GPRS GTP library' />
|
| 919 | <param name='lstats' doc='Statistics messages and logging' />
|
| 920 | <param name='lgsup' doc='Generic Subscriber Update Protocol' />
|
| 921 | <param name='loap' doc='Osmocom Authentication Protocol' />
|
| 922 | <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
|
| 923 | <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
|
| 924 | <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
|
| 925 | <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
|
| 926 | <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
|
| 927 | <param name='everything' doc='Don't use. It doesn't log anything' />
|
| 928 | <param name='debug' doc='Log debug messages and higher levels' />
|
| 929 | <param name='info' doc='Log informational messages and higher levels' />
|
| 930 | <param name='notice' doc='Log noticeable messages and higher levels' />
|
| 931 | <param name='error' doc='Log error messages and higher levels' />
|
| 932 | <param name='fatal' doc='Log only fatal messages' />
|
| 933 | </params>
|
| 934 | </command>
|
| 935 | </node>
|
| 936 | <node id='config-stats'>
|
| 937 | <command id='help'>
|
| 938 | <params>
|
| 939 | <param name='help' doc='Description of the interactive help system' />
|
| 940 | </params>
|
| 941 | </command>
|
| 942 | <command id='list'>
|
| 943 | <params>
|
| 944 | <param name='list' doc='Print command list' />
|
| 945 | </params>
|
| 946 | </command>
|
| 947 | <command id='write terminal'>
|
| 948 | <params>
|
| 949 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 950 | <param name='terminal' doc='Write to terminal' />
|
| 951 | </params>
|
| 952 | </command>
|
| 953 | <command id='write file'>
|
| 954 | <params>
|
| 955 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 956 | <param name='file' doc='Write to configuration file' />
|
| 957 | </params>
|
| 958 | </command>
|
| 959 | <command id='write memory'>
|
| 960 | <params>
|
| 961 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 962 | <param name='memory' doc='Write configuration to the file (same as write file)' />
|
| 963 | </params>
|
| 964 | </command>
|
| 965 | <command id='write'>
|
| 966 | <params>
|
| 967 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 968 | </params>
|
| 969 | </command>
|
| 970 | <command id='show running-config'>
|
| 971 | <params>
|
| 972 | <param name='show' doc='Show running system information' />
|
| 973 | <param name='running-config' doc='running configuration' />
|
| 974 | </params>
|
| 975 | </command>
|
| 976 | <command id='exit'>
|
| 977 | <params>
|
| 978 | <param name='exit' doc='Exit current mode and down to previous mode' />
|
| 979 | </params>
|
| 980 | </command>
|
| 981 | <command id='end'>
|
| 982 | <params>
|
| 983 | <param name='end' doc='End current mode and change to enable mode.' />
|
| 984 | </params>
|
| 985 | </command>
|
| 986 | <command id='local-ip ADDR'>
|
| 987 | <params>
|
| 988 | <param name='local-ip' doc='Set the IP address to which we bind locally' />
|
| 989 | <param name='ADDR' doc='IP Address' />
|
| 990 | </params>
|
| 991 | </command>
|
| 992 | <command id='no local-ip'>
|
| 993 | <params>
|
| 994 | <param name='no' doc='Negate a command or set its defaults' />
|
| 995 | <param name='local-ip' doc='Set the IP address to which we bind locally' />
|
| 996 | </params>
|
| 997 | </command>
|
| 998 | <command id='remote-ip ADDR'>
|
| 999 | <params>
|
| 1000 | <param name='remote-ip' doc='Set the remote IP address to which we connect' />
|
| 1001 | <param name='ADDR' doc='IP Address' />
|
| 1002 | </params>
|
| 1003 | </command>
|
| 1004 | <command id='remote-port <1-65535>'>
|
| 1005 | <params>
|
| 1006 | <param name='remote-port' doc='Set the remote port to which we connect' />
|
| 1007 | <param name='<1-65535>' doc='Remote port number' />
|
| 1008 | </params>
|
| 1009 | </command>
|
| 1010 | <command id='mtu <100-65535>'>
|
| 1011 | <params>
|
| 1012 | <param name='mtu' doc='Set the maximum packet size' />
|
| 1013 | <param name='<100-65535>' doc='Size in byte' />
|
| 1014 | </params>
|
| 1015 | </command>
|
| 1016 | <command id='no mtu'>
|
| 1017 | <params>
|
| 1018 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1019 | <param name='mtu' doc='Set the maximum packet size' />
|
| 1020 | </params>
|
| 1021 | </command>
|
| 1022 | <command id='prefix PREFIX'>
|
| 1023 | <params>
|
| 1024 | <param name='prefix' doc='Set the item name prefix' />
|
| 1025 | <param name='PREFIX' doc='The prefix string' />
|
| 1026 | </params>
|
| 1027 | </command>
|
| 1028 | <command id='no prefix'>
|
| 1029 | <params>
|
| 1030 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1031 | <param name='prefix' doc='Set the item name prefix' />
|
| 1032 | </params>
|
| 1033 | </command>
|
| 1034 | <command id='level (global|peer|subscriber)'>
|
| 1035 | <params>
|
| 1036 | <param name='level' doc='Set the maximum group level' />
|
| 1037 | <param name='global' doc='Report global groups only' />
|
| 1038 | <param name='peer' doc='Report global and network peer related groups' />
|
| 1039 | <param name='subscriber' doc='Report global, peer, and subscriber groups' />
|
| 1040 | </params>
|
| 1041 | </command>
|
| 1042 | <command id='enable'>
|
| 1043 | <params>
|
| 1044 | <param name='enable' doc='Enable the reporter' />
|
| 1045 | </params>
|
| 1046 | </command>
|
| 1047 | <command id='disable'>
|
| 1048 | <params>
|
| 1049 | <param name='disable' doc='Disable the reporter' />
|
| 1050 | </params>
|
| 1051 | </command>
|
| 1052 | </node>
|
| 1053 | <node id='config-line'>
|
| 1054 | <command id='help'>
|
| 1055 | <params>
|
| 1056 | <param name='help' doc='Description of the interactive help system' />
|
| 1057 | </params>
|
| 1058 | </command>
|
| 1059 | <command id='list'>
|
| 1060 | <params>
|
| 1061 | <param name='list' doc='Print command list' />
|
| 1062 | </params>
|
| 1063 | </command>
|
| 1064 | <command id='write terminal'>
|
| 1065 | <params>
|
| 1066 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1067 | <param name='terminal' doc='Write to terminal' />
|
| 1068 | </params>
|
| 1069 | </command>
|
| 1070 | <command id='write file'>
|
| 1071 | <params>
|
| 1072 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1073 | <param name='file' doc='Write to configuration file' />
|
| 1074 | </params>
|
| 1075 | </command>
|
| 1076 | <command id='write memory'>
|
| 1077 | <params>
|
| 1078 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1079 | <param name='memory' doc='Write configuration to the file (same as write file)' />
|
| 1080 | </params>
|
| 1081 | </command>
|
| 1082 | <command id='write'>
|
| 1083 | <params>
|
| 1084 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1085 | </params>
|
| 1086 | </command>
|
| 1087 | <command id='show running-config'>
|
| 1088 | <params>
|
| 1089 | <param name='show' doc='Show running system information' />
|
| 1090 | <param name='running-config' doc='running configuration' />
|
| 1091 | </params>
|
| 1092 | </command>
|
| 1093 | <command id='exit'>
|
| 1094 | <params>
|
| 1095 | <param name='exit' doc='Exit current mode and down to previous mode' />
|
| 1096 | </params>
|
| 1097 | </command>
|
| 1098 | <command id='end'>
|
| 1099 | <params>
|
| 1100 | <param name='end' doc='End current mode and change to enable mode.' />
|
| 1101 | </params>
|
| 1102 | </command>
|
| 1103 | <command id='login'>
|
| 1104 | <params>
|
| 1105 | <param name='login' doc='Enable password checking' />
|
| 1106 | </params>
|
| 1107 | </command>
|
| 1108 | <command id='no login'>
|
| 1109 | <params>
|
| 1110 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1111 | <param name='login' doc='Enable password checking' />
|
| 1112 | </params>
|
| 1113 | </command>
|
| 1114 | <command id='bind A.B.C.D'>
|
| 1115 | <params>
|
| 1116 | <param name='bind' doc='Accept VTY telnet connections on local interface' />
|
| 1117 | <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
|
| 1118 | </params>
|
| 1119 | </command>
|
| 1120 | </node>
|
| 1121 | <node id='config-mgcp'>
|
| 1122 | <command id='help'>
|
| 1123 | <params>
|
| 1124 | <param name='help' doc='Description of the interactive help system' />
|
| 1125 | </params>
|
| 1126 | </command>
|
| 1127 | <command id='list'>
|
| 1128 | <params>
|
| 1129 | <param name='list' doc='Print command list' />
|
| 1130 | </params>
|
| 1131 | </command>
|
| 1132 | <command id='write terminal'>
|
| 1133 | <params>
|
| 1134 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1135 | <param name='terminal' doc='Write to terminal' />
|
| 1136 | </params>
|
| 1137 | </command>
|
| 1138 | <command id='write file'>
|
| 1139 | <params>
|
| 1140 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1141 | <param name='file' doc='Write to configuration file' />
|
| 1142 | </params>
|
| 1143 | </command>
|
| 1144 | <command id='write memory'>
|
| 1145 | <params>
|
| 1146 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1147 | <param name='memory' doc='Write configuration to the file (same as write file)' />
|
| 1148 | </params>
|
| 1149 | </command>
|
| 1150 | <command id='write'>
|
| 1151 | <params>
|
| 1152 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1153 | </params>
|
| 1154 | </command>
|
| 1155 | <command id='show running-config'>
|
| 1156 | <params>
|
| 1157 | <param name='show' doc='Show running system information' />
|
| 1158 | <param name='running-config' doc='running configuration' />
|
| 1159 | </params>
|
| 1160 | </command>
|
| 1161 | <command id='exit'>
|
| 1162 | <params>
|
| 1163 | <param name='exit' doc='Exit current mode and down to previous mode' />
|
| 1164 | </params>
|
| 1165 | </command>
|
| 1166 | <command id='end'>
|
| 1167 | <params>
|
| 1168 | <param name='end' doc='End current mode and change to enable mode.' />
|
| 1169 | </params>
|
| 1170 | </command>
|
| 1171 | <command id='local ip A.B.C.D'>
|
| 1172 | <params>
|
| 1173 | <param name='local' doc='Local options for the SDP record' />
|
| 1174 | <param name='ip' doc='IP information' />
|
| 1175 | <param name='A.B.C.D' doc='IPv4 Address to use in SDP record' />
|
| 1176 | </params>
|
| 1177 | </command>
|
| 1178 | <command id='bind ip A.B.C.D'>
|
| 1179 | <params>
|
| 1180 | <param name='bind' doc='Listen/Bind related socket option' />
|
| 1181 | <param name='ip' doc='IP information' />
|
| 1182 | <param name='A.B.C.D' doc='IPv4 Address to bind to' />
|
| 1183 | </params>
|
| 1184 | </command>
|
| 1185 | <command id='bind port <0-65534>'>
|
| 1186 | <params>
|
| 1187 | <param name='bind' doc='Listen/Bind related socket option' />
|
| 1188 | <param name='port' doc='Port information' />
|
| 1189 | <param name='<0-65534>' doc='UDP port to listen for MGCP messages' />
|
| 1190 | </params>
|
| 1191 | </command>
|
| 1192 | <command id='bind early (0|1)'>
|
| 1193 | <params>
|
| 1194 | <param name='bind' doc='Listen/Bind related socket option' />
|
| 1195 | <param name='early' doc='Bind local ports on start up' />
|
| 1196 | <param name='0' doc='Bind on demand' />
|
| 1197 | <param name='1' doc='Bind on startup' />
|
| 1198 | </params>
|
| 1199 | </command>
|
| 1200 | <command id='rtp net-range <0-65534> <0-65534>'>
|
| 1201 | <params>
|
| 1202 | <param name='rtp' doc='RTP configuration' />
|
| 1203 | <param name='net-range' doc='Range of ports to use for the NET side' />
|
| 1204 | <param name='<0-65534>' doc='Start of the range of ports' />
|
| 1205 | <param name='<0-65534>' doc='End of the range of ports' />
|
| 1206 | </params>
|
| 1207 | </command>
|
| 1208 | <command id='rtp port-range <0-65534> <0-65534>'>
|
| 1209 | <params>
|
| 1210 | <param name='rtp' doc='RTP configuration' />
|
| 1211 | <param name='port-range' doc='Range of ports to use for the NET side' />
|
| 1212 | <param name='<0-65534>' doc='Start of the range of ports' />
|
| 1213 | <param name='<0-65534>' doc='End of the range of ports' />
|
| 1214 | </params>
|
| 1215 | </command>
|
| 1216 | <command id='rtp net-bind-ip A.B.C.D'>
|
| 1217 | <params>
|
| 1218 | <param name='rtp' doc='RTP configuration' />
|
| 1219 | <param name='net-bind-ip' doc='Bind endpoints facing the Network' />
|
| 1220 | <param name='A.B.C.D' doc='Address to bind to' />
|
| 1221 | </params>
|
| 1222 | </command>
|
| 1223 | <command id='rtp bind-ip A.B.C.D'>
|
| 1224 | <params>
|
| 1225 | <param name='rtp' doc='RTP configuration' />
|
| 1226 | <param name='bind-ip' doc='Bind endpoints facing the Network' />
|
| 1227 | <param name='A.B.C.D' doc='Address to bind to' />
|
| 1228 | </params>
|
| 1229 | </command>
|
| 1230 | <command id='no rtp net-bind-ip'>
|
| 1231 | <params>
|
| 1232 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1233 | <param name='rtp' doc='RTP configuration' />
|
| 1234 | <param name='net-bind-ip' doc='Bind endpoints facing the Network' />
|
| 1235 | </params>
|
| 1236 | </command>
|
| 1237 | <command id='no rtp bind-ip'>
|
| 1238 | <params>
|
| 1239 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1240 | <param name='rtp' doc='RTP configuration' />
|
| 1241 | <param name='bind-ip' doc='Bind endpoints facing the Network' />
|
| 1242 | </params>
|
| 1243 | </command>
|
| 1244 | <command id='rtp ip-probing'>
|
| 1245 | <params>
|
| 1246 | <param name='rtp' doc='RTP configuration' />
|
| 1247 | <param name='ip-probing' doc='automatic rtp bind ip selection' />
|
| 1248 | </params>
|
| 1249 | </command>
|
| 1250 | <command id='no rtp ip-probing'>
|
| 1251 | <params>
|
| 1252 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1253 | <param name='rtp' doc='RTP configuration' />
|
| 1254 | <param name='ip-probing' doc='no automatic rtp bind ip selection' />
|
| 1255 | </params>
|
| 1256 | </command>
|
| 1257 | <command id='rtp ip-dscp <0-255>'>
|
| 1258 | <params>
|
| 1259 | <param name='rtp' doc='RTP configuration' />
|
| 1260 | <param name='ip-dscp' doc='Apply IP_TOS to the audio stream (including Osmux)' />
|
| 1261 | <param name='<0-255>' doc='The DSCP value' />
|
| 1262 | </params>
|
| 1263 | </command>
|
| 1264 | <command id='rtp ip-tos <0-255>'>
|
| 1265 | <params>
|
| 1266 | <param name='rtp' doc='RTP configuration' />
|
| 1267 | <param name='ip-tos' doc='Apply IP_TOS to the audio stream' />
|
| 1268 | <param name='<0-255>' doc='The DSCP value' />
|
| 1269 | </params>
|
| 1270 | </command>
|
| 1271 | <command id='rtp force-ptime (10|20|40)'>
|
| 1272 | <params>
|
| 1273 | <param name='rtp' doc='RTP configuration' />
|
| 1274 | <param name='force-ptime' doc='Force a fixed ptime for packets sentThe required ptime (packet duration) in ms' />
|
| 1275 | <param name='10' doc='10 ms' />
|
| 1276 | <param name='20' doc='20 ms' />
|
| 1277 | <param name='40' doc='40 ms' />
|
| 1278 | </params>
|
| 1279 | </command>
|
| 1280 | <command id='no rtp force-ptime'>
|
| 1281 | <params>
|
| 1282 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1283 | <param name='rtp' doc='RTP configuration' />
|
| 1284 | <param name='force-ptime' doc='Force a fixed ptime for packets sent' />
|
| 1285 | </params>
|
| 1286 | </command>
|
| 1287 | <command id='rtp keep-alive <1-120>'>
|
| 1288 | <params>
|
| 1289 | <param name='rtp' doc='RTP configuration' />
|
| 1290 | <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
| 1291 | <param name='<1-120>' doc='Keep alive interval in secs' />
|
| 1292 | </params>
|
| 1293 | </command>
|
| 1294 | <command id='rtp keep-alive once'>
|
| 1295 | <params>
|
| 1296 | <param name='rtp' doc='RTP configuration' />
|
| 1297 | <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
| 1298 | <param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
|
| 1299 | </params>
|
| 1300 | </command>
|
| 1301 | <command id='no rtp keep-alive'>
|
| 1302 | <params>
|
| 1303 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1304 | <param name='rtp' doc='RTP configuration' />
|
| 1305 | <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
| 1306 | </params>
|
| 1307 | </command>
|
| 1308 | <command id='call-agent ip A.B.C.D'>
|
| 1309 | <params>
|
| 1310 | <param name='call-agent' doc='Callagent information' />
|
| 1311 | <param name='ip' doc='IP information' />
|
| 1312 | <param name='A.B.C.D' doc='IPv4 Address of the callagent' />
|
| 1313 | </params>
|
| 1314 | </command>
|
| 1315 | <command id='call agent ip A.B.C.D'>
|
| 1316 | <params>
|
| 1317 | <param name='call' doc='Callagent information' />
|
| 1318 | <param name='agent' doc='Callagent information' />
|
| 1319 | <param name='ip' doc='IP information' />
|
| 1320 | <param name='A.B.C.D' doc='IPv4 Address of the callagent' />
|
| 1321 | </params>
|
| 1322 | </command>
|
| 1323 | <command id='sdp audio-payload number <0-255>'>
|
| 1324 | <params>
|
| 1325 | <param name='sdp' doc='SDP File related options' />
|
| 1326 | <param name='audio-payload' doc='Audio payload options' />
|
| 1327 | <param name='number' doc='Number' />
|
| 1328 | <param name='<0-255>' doc='Payload number' />
|
| 1329 | </params>
|
| 1330 | </command>
|
| 1331 | <command id='sdp audio-payload name NAME'>
|
| 1332 | <params>
|
| 1333 | <param name='sdp' doc='SDP File related options' />
|
| 1334 | <param name='audio-payload' doc='Audio payload options' />
|
| 1335 | <param name='name' doc='Name' />
|
| 1336 | <param name='NAME' doc='Payload name' />
|
| 1337 | </params>
|
| 1338 | </command>
|
| 1339 | <command id='sdp audio payload number <0-255>'>
|
| 1340 | <params>
|
| 1341 | <param name='sdp' doc='SDP File related options' />
|
| 1342 | <param name='audio' doc='Audio payload options' />
|
| 1343 | <param name='payload' doc='Audio payload options' />
|
| 1344 | <param name='number' doc='Number' />
|
| 1345 | <param name='<0-255>' doc='Payload number' />
|
| 1346 | </params>
|
| 1347 | </command>
|
| 1348 | <command id='sdp audio payload name NAME'>
|
| 1349 | <params>
|
| 1350 | <param name='sdp' doc='SDP File related options' />
|
| 1351 | <param name='audio' doc='Audio payload options' />
|
| 1352 | <param name='payload' doc='Audio payload options' />
|
| 1353 | <param name='name' doc='Name' />
|
| 1354 | <param name='NAME' doc='Payload name' />
|
| 1355 | </params>
|
| 1356 | </command>
|
| 1357 | <command id='loop (0|1)'>
|
| 1358 | <params>
|
| 1359 | <param name='loop' doc='Loop audio for all endpoints on main trunk' />
|
| 1360 | <param name='0' doc='Don't Loop' />
|
| 1361 | <param name='1' doc='Loop' />
|
| 1362 | </params>
|
| 1363 | </command>
|
| 1364 | <command id='force-realloc (0|1)'>
|
| 1365 | <params>
|
| 1366 | <param name='force-realloc' doc='Force endpoint reallocation when the endpoint is still seized' />
|
| 1367 | <param name='0' doc='Don't force reallocation' />
|
| 1368 | <param name='1' doc='force reallocation' />
|
| 1369 | </params>
|
| 1370 | </command>
|
| 1371 | <command id='rtp-accept-all (0|1)'>
|
| 1372 | <params>
|
| 1373 | <param name='rtp-accept-all' doc='Accept all RTP packets, even when the originating IP/Port does not match' />
|
| 1374 | <param name='0' doc='enable filter' />
|
| 1375 | <param name='1' doc='disable filter' />
|
| 1376 | </params>
|
| 1377 | </command>
|
| 1378 | <command id='number endpoints <0-65534>'>
|
| 1379 | <params>
|
| 1380 | <param name='number' doc='Number options' />
|
| 1381 | <param name='endpoints' doc='Endpoints available' />
|
| 1382 | <param name='<0-65534>' doc='Number endpoints' />
|
| 1383 | </params>
|
| 1384 | </command>
|
| 1385 | <command id='rtcp-omit'>
|
| 1386 | <params>
|
| 1387 | <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
|
| 1388 | </params>
|
| 1389 | </command>
|
| 1390 | <command id='no rtcp-omit'>
|
| 1391 | <params>
|
| 1392 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1393 | <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
|
| 1394 | </params>
|
| 1395 | </command>
|
| 1396 | <command id='rtp-patch ssrc'>
|
| 1397 | <params>
|
| 1398 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1399 | <param name='ssrc' doc='Force a fixed SSRC' />
|
| 1400 | </params>
|
| 1401 | </command>
|
| 1402 | <command id='no rtp-patch ssrc'>
|
| 1403 | <params>
|
| 1404 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1405 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1406 | <param name='ssrc' doc='Force a fixed SSRC' />
|
| 1407 | </params>
|
| 1408 | </command>
|
| 1409 | <command id='rtp-patch timestamp'>
|
| 1410 | <params>
|
| 1411 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1412 | <param name='timestamp' doc='Adjust RTP timestamp' />
|
| 1413 | </params>
|
| 1414 | </command>
|
| 1415 | <command id='no rtp-patch timestamp'>
|
| 1416 | <params>
|
| 1417 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1418 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1419 | <param name='timestamp' doc='Adjust RTP timestamp' />
|
| 1420 | </params>
|
| 1421 | </command>
|
| 1422 | <command id='no rtp-patch'>
|
| 1423 | <params>
|
| 1424 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1425 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1426 | </params>
|
| 1427 | </command>
|
| 1428 | <command id='sdp audio fmtp-extra .NAME'>
|
| 1429 | <params>
|
| 1430 | <param name='sdp' doc='Add extra fmtp for the SDP file' />
|
| 1431 | <param name='audio' doc='Audio' />
|
| 1432 | <param name='fmtp-extra' doc='Fmtp-extra' />
|
| 1433 | <param name='.NAME' doc='Extra Information' />
|
| 1434 | </params>
|
| 1435 | </command>
|
| 1436 | <command id='sdp audio-payload send-ptime'>
|
| 1437 | <params>
|
| 1438 | <param name='sdp' doc='SDP File related options' />
|
| 1439 | <param name='audio-payload' doc='Audio payload options' />
|
| 1440 | <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
|
| 1441 | </params>
|
| 1442 | </command>
|
| 1443 | <command id='no sdp audio-payload send-ptime'>
|
| 1444 | <params>
|
| 1445 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1446 | <param name='sdp' doc='SDP File related options' />
|
| 1447 | <param name='audio-payload' doc='Audio payload options' />
|
| 1448 | <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
|
| 1449 | </params>
|
| 1450 | </command>
|
| 1451 | <command id='sdp audio-payload send-name'>
|
| 1452 | <params>
|
| 1453 | <param name='sdp' doc='SDP File related options' />
|
| 1454 | <param name='audio-payload' doc='Audio payload options' />
|
| 1455 | <param name='send-name' doc='Send SDP rtpmap with the audio name' />
|
| 1456 | </params>
|
| 1457 | </command>
|
| 1458 | <command id='no sdp audio-payload send-name'>
|
| 1459 | <params>
|
| 1460 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1461 | <param name='sdp' doc='SDP File related options' />
|
| 1462 | <param name='audio-payload' doc='Audio payload options' />
|
| 1463 | <param name='send-name' doc='Send SDP rtpmap with the audio name' />
|
| 1464 | </params>
|
| 1465 | </command>
|
| 1466 | <command id='osmux (on|off|only)'>
|
| 1467 | <params>
|
| 1468 | <param name='osmux' doc='RTP multiplexing' />
|
| 1469 | <param name='on' doc='Enable OSMUX' />
|
| 1470 | <param name='off' doc='Disable OSMUX' />
|
| 1471 | <param name='only' doc='Only use OSMUX' />
|
| 1472 | </params>
|
| 1473 | </command>
|
| 1474 | <command id='osmux bind-ip A.B.C.D'>
|
| 1475 | <params>
|
| 1476 | <param name='osmux' doc='RTP multiplexing' />
|
| 1477 | <param name='bind-ip' doc='IP information' />
|
| 1478 | <param name='A.B.C.D' doc='IPv4 Address to bind to' />
|
| 1479 | </params>
|
| 1480 | </command>
|
| 1481 | <command id='osmux batch-factor <1-8>'>
|
| 1482 | <params>
|
| 1483 | <param name='osmux' doc='RTP multiplexing' />
|
| 1484 | <param name='batch-factor' doc='Batching factor' />
|
| 1485 | <param name='<1-8>' doc='Number of messages in the batch' />
|
| 1486 | </params>
|
| 1487 | </command>
|
| 1488 | <command id='osmux batch-size <1-65535>'>
|
| 1489 | <params>
|
| 1490 | <param name='osmux' doc='RTP multiplexing' />
|
| 1491 | <param name='batch-size' doc='batch size' />
|
| 1492 | <param name='<1-65535>' doc='Batch size in bytes' />
|
| 1493 | </params>
|
| 1494 | </command>
|
| 1495 | <command id='osmux port <1-65535>'>
|
| 1496 | <params>
|
| 1497 | <param name='osmux' doc='RTP multiplexing' />
|
| 1498 | <param name='port' doc='port' />
|
| 1499 | <param name='<1-65535>' doc='UDP port' />
|
| 1500 | </params>
|
| 1501 | </command>
|
| 1502 | <command id='osmux dummy (on|off)'>
|
| 1503 | <params>
|
| 1504 | <param name='osmux' doc='RTP multiplexing' />
|
| 1505 | <param name='dummy' doc='Dummy padding' />
|
| 1506 | <param name='on' doc='Enable dummy padding' />
|
| 1507 | <param name='off' doc='Disable dummy padding' />
|
| 1508 | </params>
|
| 1509 | </command>
|
| 1510 | <command id='allow-transcoding'>
|
| 1511 | <params>
|
| 1512 | <param name='allow-transcoding' doc='Allow transcoding' />
|
| 1513 | </params>
|
| 1514 | </command>
|
| 1515 | <command id='no allow-transcoding'>
|
| 1516 | <params>
|
| 1517 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1518 | <param name='allow-transcoding' doc='Allow transcoding' />
|
| 1519 | </params>
|
| 1520 | </command>
|
| 1521 | <command id='trunk <1-64>'>
|
| 1522 | <params>
|
| 1523 | <param name='trunk' doc='Configure a SS7 trunk' />
|
| 1524 | <param name='<1-64>' doc='Trunk Nr' />
|
| 1525 | </params>
|
| 1526 | </command>
|
| 1527 | </node>
|
| 1528 | <node id='config-mgcp-trunk'>
|
| 1529 | <command id='help'>
|
| 1530 | <params>
|
| 1531 | <param name='help' doc='Description of the interactive help system' />
|
| 1532 | </params>
|
| 1533 | </command>
|
| 1534 | <command id='list'>
|
| 1535 | <params>
|
| 1536 | <param name='list' doc='Print command list' />
|
| 1537 | </params>
|
| 1538 | </command>
|
| 1539 | <command id='write terminal'>
|
| 1540 | <params>
|
| 1541 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1542 | <param name='terminal' doc='Write to terminal' />
|
| 1543 | </params>
|
| 1544 | </command>
|
| 1545 | <command id='write file'>
|
| 1546 | <params>
|
| 1547 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1548 | <param name='file' doc='Write to configuration file' />
|
| 1549 | </params>
|
| 1550 | </command>
|
| 1551 | <command id='write memory'>
|
| 1552 | <params>
|
| 1553 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1554 | <param name='memory' doc='Write configuration to the file (same as write file)' />
|
| 1555 | </params>
|
| 1556 | </command>
|
| 1557 | <command id='write'>
|
| 1558 | <params>
|
| 1559 | <param name='write' doc='Write running configuration to memory, network, or terminal' />
|
| 1560 | </params>
|
| 1561 | </command>
|
| 1562 | <command id='show running-config'>
|
| 1563 | <params>
|
| 1564 | <param name='show' doc='Show running system information' />
|
| 1565 | <param name='running-config' doc='running configuration' />
|
| 1566 | </params>
|
| 1567 | </command>
|
| 1568 | <command id='exit'>
|
| 1569 | <params>
|
| 1570 | <param name='exit' doc='Exit current mode and down to previous mode' />
|
| 1571 | </params>
|
| 1572 | </command>
|
| 1573 | <command id='end'>
|
| 1574 | <params>
|
| 1575 | <param name='end' doc='End current mode and change to enable mode.' />
|
| 1576 | </params>
|
| 1577 | </command>
|
| 1578 | <command id='rtp keep-alive <1-120>'>
|
| 1579 | <params>
|
| 1580 | <param name='rtp' doc='RTP configuration' />
|
| 1581 | <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
| 1582 | <param name='<1-120>' doc='Keep-alive interval in secs' />
|
| 1583 | </params>
|
| 1584 | </command>
|
| 1585 | <command id='rtp keep-alive once'>
|
| 1586 | <params>
|
| 1587 | <param name='rtp' doc='RTP configuration' />
|
| 1588 | <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
| 1589 | <param name='once' doc='Send dummy packet only once after CRCX/MDCX' />
|
| 1590 | </params>
|
| 1591 | </command>
|
| 1592 | <command id='no rtp keep-alive'>
|
| 1593 | <params>
|
| 1594 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1595 | <param name='rtp' doc='RTP configuration' />
|
| 1596 | <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' />
|
| 1597 | </params>
|
| 1598 | </command>
|
| 1599 | <command id='sdp audio-payload number <0-255>'>
|
| 1600 | <params>
|
| 1601 | <param name='sdp' doc='SDP File related options' />
|
| 1602 | <param name='audio-payload' doc='Audio payload options' />
|
| 1603 | <param name='number' doc='Number' />
|
| 1604 | <param name='<0-255>' doc='Payload Number' />
|
| 1605 | </params>
|
| 1606 | </command>
|
| 1607 | <command id='sdp audio-payload name NAME'>
|
| 1608 | <params>
|
| 1609 | <param name='sdp' doc='SDP File related options' />
|
| 1610 | <param name='audio-payload' doc='Audio payload options' />
|
| 1611 | <param name='name' doc='Payload' />
|
| 1612 | <param name='NAME' doc='Payload Name' />
|
| 1613 | </params>
|
| 1614 | </command>
|
| 1615 | <command id='sdp audio payload number <0-255>'>
|
| 1616 | <params>
|
| 1617 | <param name='sdp' doc='SDP File related options' />
|
| 1618 | <param name='audio' doc='Audio payload options' />
|
| 1619 | <param name='payload' doc='Audio payload options' />
|
| 1620 | <param name='number' doc='Number' />
|
| 1621 | <param name='<0-255>' doc='Payload Number' />
|
| 1622 | </params>
|
| 1623 | </command>
|
| 1624 | <command id='sdp audio payload name NAME'>
|
| 1625 | <params>
|
| 1626 | <param name='sdp' doc='SDP File related options' />
|
| 1627 | <param name='audio' doc='Audio payload options' />
|
| 1628 | <param name='payload' doc='Audio payload options' />
|
| 1629 | <param name='name' doc='Payload' />
|
| 1630 | <param name='NAME' doc='Payload Name' />
|
| 1631 | </params>
|
| 1632 | </command>
|
| 1633 | <command id='loop (0|1)'>
|
| 1634 | <params>
|
| 1635 | <param name='loop' doc='Loop audio for all endpoints on this trunk' />
|
| 1636 | <param name='0' doc='Don't Loop' />
|
| 1637 | <param name='1' doc='Loop' />
|
| 1638 | </params>
|
| 1639 | </command>
|
| 1640 | <command id='rtcp-omit'>
|
| 1641 | <params>
|
| 1642 | <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
|
| 1643 | </params>
|
| 1644 | </command>
|
| 1645 | <command id='no rtcp-omit'>
|
| 1646 | <params>
|
| 1647 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1648 | <param name='rtcp-omit' doc='Drop RTCP packets in both directions' />
|
| 1649 | </params>
|
| 1650 | </command>
|
| 1651 | <command id='rtp-patch ssrc'>
|
| 1652 | <params>
|
| 1653 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1654 | <param name='ssrc' doc='Force a fixed SSRC' />
|
| 1655 | </params>
|
| 1656 | </command>
|
| 1657 | <command id='no rtp-patch ssrc'>
|
| 1658 | <params>
|
| 1659 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1660 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1661 | <param name='ssrc' doc='Force a fixed SSRC' />
|
| 1662 | </params>
|
| 1663 | </command>
|
| 1664 | <command id='rtp-patch timestamp'>
|
| 1665 | <params>
|
| 1666 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1667 | <param name='timestamp' doc='Adjust RTP timestamp' />
|
| 1668 | </params>
|
| 1669 | </command>
|
| 1670 | <command id='no rtp-patch timestamp'>
|
| 1671 | <params>
|
| 1672 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1673 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1674 | <param name='timestamp' doc='Adjust RTP timestamp' />
|
| 1675 | </params>
|
| 1676 | </command>
|
| 1677 | <command id='no rtp-patch'>
|
| 1678 | <params>
|
| 1679 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1680 | <param name='rtp-patch' doc='Modify RTP packet header in both directions' />
|
| 1681 | </params>
|
| 1682 | </command>
|
| 1683 | <command id='sdp audio fmtp-extra .NAME'>
|
| 1684 | <params>
|
| 1685 | <param name='sdp' doc='Add extra fmtp for the SDP file' />
|
| 1686 | <param name='audio' doc='Audio' />
|
| 1687 | <param name='fmtp-extra' doc='Fmtp-extra' />
|
| 1688 | <param name='.NAME' doc='Extra Information' />
|
| 1689 | </params>
|
| 1690 | </command>
|
| 1691 | <command id='sdp audio-payload send-ptime'>
|
| 1692 | <params>
|
| 1693 | <param name='sdp' doc='SDP File related options' />
|
| 1694 | <param name='audio-payload' doc='Audio payload options' />
|
| 1695 | <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
|
| 1696 | </params>
|
| 1697 | </command>
|
| 1698 | <command id='no sdp audio-payload send-ptime'>
|
| 1699 | <params>
|
| 1700 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1701 | <param name='sdp' doc='SDP File related options' />
|
| 1702 | <param name='audio-payload' doc='Audio payload options' />
|
| 1703 | <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' />
|
| 1704 | </params>
|
| 1705 | </command>
|
| 1706 | <command id='sdp audio-payload send-name'>
|
| 1707 | <params>
|
| 1708 | <param name='sdp' doc='SDP File related options' />
|
| 1709 | <param name='audio-payload' doc='Audio payload options' />
|
| 1710 | <param name='send-name' doc='Send SDP rtpmap with the audio name' />
|
| 1711 | </params>
|
| 1712 | </command>
|
| 1713 | <command id='no sdp audio-payload send-name'>
|
| 1714 | <params>
|
| 1715 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1716 | <param name='sdp' doc='SDP File related options' />
|
| 1717 | <param name='audio-payload' doc='Audio payload options' />
|
| 1718 | <param name='send-name' doc='Send SDP rtpmap with the audio name' />
|
| 1719 | </params>
|
| 1720 | </command>
|
| 1721 | <command id='allow-transcoding'>
|
| 1722 | <params>
|
| 1723 | <param name='allow-transcoding' doc='Allow transcoding' />
|
| 1724 | </params>
|
| 1725 | </command>
|
| 1726 | <command id='no allow-transcoding'>
|
| 1727 | <params>
|
| 1728 | <param name='no' doc='Negate a command or set its defaults' />
|
| 1729 | <param name='allow-transcoding' doc='Allow transcoding' />
|
| 1730 | </params>
|
| 1731 | </command>
|
| 1732 | </node>
|
| 1733 | </vtydoc>
|