1. 71336c2 scenarios: Introduce mod-enb-cells-2ca.conf by Pau Espin Pedrol · 3 years, 9 months ago
  2. d0e8601 templates/osmo-bts-trx: Increase osmo-trx rx-gain by Pau Espin Pedrol · 3 years, 9 months ago
  3. e3f40f9 rfemu_srsenb_stdin: use negative dB value to set attenuation by Andre Puschmann · 3 years, 9 months ago
  4. 54307cb {enb,epc,ms}_srs: remove uneeded class variable by Andre Puschmann · 3 years, 9 months ago
  5. 10c64fe srsenb: Activate handover in config file by Pau Espin Pedrol · 3 years, 9 months ago
  6. 9ff1eab srsenb: Fix ECI in handover cell list by Pau Espin Pedrol · 3 years, 9 months ago
  7. 1f46d24 Introduce RFemu stdin implementation for srsENB by Pau Espin Pedrol · 3 years, 9 months ago
  8. b5f0444 srs{enb,ue}: add rf_dev_sync option to config templates by Andre Puschmann · 3 years, 9 months ago
  9. c489f19 enb_amarisoft: add rf_dev_sync option to specify the sync type by Andre Puschmann · 3 years, 9 months ago
  10. 4bf2043 jenkins-build-amarisoft: fix build script for ZMQ module by Andre Puschmann · 3 years, 9 months ago
  11. e3a1910 ms_srs: add freq_offset as resource param by Andre Puschmann · 3 years, 9 months ago
  12. 182109d srslte_common: fix indent in whole file by Andre Puschmann · 3 years, 9 months ago
  13. f4fb48a srslte_common: add get_num_phy_errors() method by Andre Puschmann · 3 years, 9 months ago
  14. a9bbbd6 amarisoft_enb.cfg.tmpl: seperate PRACH root sequences for cells by Andre Puschmann · 3 years, 9 months ago
  15. c1c2f3d enb_amarisoft: reduce max achievable UL rate for 100 PRB by Andre Puschmann · 3 years, 9 months ago
  16. 51fa941 amarisoft_enb.cfg.tmpl: increas threshold for failed UL retransmissions by Andre Puschmann · 3 years, 9 months ago
  17. 0e00f38 lte: update UHD device args for MIMO usage by Andre Puschmann · 3 years, 9 months ago
  18. 0908ceb amarisoft_enb.cfg.tmpl: use default tac 0007 by Andre Puschmann · 3 years, 9 months ago
  19. dda20e2 amarisoft_sib23.asn.tmpl: set p-b value in SIB23 depending on TM by Andre Puschmann · 3 years, 9 months ago
  20. a9fb751 ms_srs: fix ZMQ config for 4xCA by Andre Puschmann · 3 years, 9 months ago
  21. eb991f5 srsenb_rr.conf.tmpl: set TAC for cells to 0x0007 by Andre Puschmann · 3 years, 9 months ago
  22. 99fb78b {enb,epc,ms}_srs: refactor start/stop and KPI helpers by Andre Puschmann · 3 years, 10 months ago
  23. 3d3bbcb reduce max expected UL rate for 4xCA 100 PRB by Andre Puschmann · 3 years, 10 months ago
  24. 52fb33c srsenb_rr.conf.example: comment CQI and SR specific subframes by Andre Puschmann · 3 years, 10 months ago
  25. 645b5cc enb_amarisoft: temporary reduce max UL rate on 2nd CC by Andre Puschmann · 3 years, 10 months ago
  26. 4db88de enb_srs: expose DL AWGN channel modifier for srsENB by Andre Puschmann · 3 years, 10 months ago
  27. 7d3b83e enb: incorporate number of carriers into ue_max_rate() API by Andre Puschmann · 3 years, 10 months ago
  28. 2159cfe contrib: osmo-trx: Drop explicit --without-sse by Pau Espin Pedrol · 3 years, 9 months ago
  29. 7cb6bad testenv: Fix missing import module util by Pau Espin Pedrol · 3 years, 9 months ago
  30. 1b99ad6 osmo-trx: Set more restrictive logging levels to avoid sporadic high load on stderr by Pau Espin Pedrol · 3 years, 9 months ago
  31. a7a89bd bts-trx: Disable power-ramp by Pau Espin Pedrol · 3 years, 9 months ago
  32. cda03cb 4g: consider number of component carriers for max rate calculation by Andre Puschmann · 3 years, 10 months ago
  33. 9bcbb9a ms_srs: trim leading zeros in UE metrics when calculating min_rolling_avg by Andre Puschmann · 3 years, 10 months ago
  34. 0cfc084 enb: expose RRC inactivity timer by Andre Puschmann · 3 years, 10 months ago
  35. 736c30b srsenb_rr.conf.tmpl: reduce PUCCH PRBs for SR and CQI to 1 by Andre Puschmann · 3 years, 10 months ago
  36. d899cf4 rfemu_amarisoft: handle exception and log event if WS is closed by Andre Puschmann · 3 years, 10 months ago
  37. 58422c5 enb_srs: add sleep after stopping srsENB to allow log flush by Andre Puschmann · 3 years, 10 months ago
  38. a7b21a8 srs{ue,enb}.conf.tmpl: remove restriction of PHY threads for ZMQ by Andre Puschmann · 4 years ago
  39. 25743bc ttcn3/lib/testlib.py: increase test suite execution timeout by Vadim Yanitskiy · 3 years, 11 months ago
  40. ac5f6f8 ttcn3/suites/scripts: collect core dumps: add '--ulimit core=-1' by Vadim Yanitskiy · 3 years, 11 months ago
  41. e42631a ttcn3/suites/bts: also enable both BTS_Tests_{SMSCB,LAPDm} by Vadim Yanitskiy · 3 years, 11 months ago
  42. d1cb759 ttcn3/lib/testlib.py: implement the concept of test case groups by Vadim Yanitskiy · 3 years, 11 months ago
  43. ed5c776 ttcn3/lib/testlib.py: make list of kwargs git friendly by Vadim Yanitskiy · 3 years, 11 months ago
  44. d81b1e4 suite: fix runtime error when suite.duration is None by Andre Puschmann · 4 years ago
  45. 6039c1c srsenb_drb.conf.tmpl: add QCI8 config by Andre Puschmann · 4 years ago
  46. dbe4bb3 amarisoft_enb.cfg.tmpl: enable eNB PCAP if configured by Andre Puschmann · 4 years ago
  47. bafedff amarisoft_drb: adapt QCI 8 config for ZMQ operation by Andre Puschmann · 4 years ago
  48. 053ee5f iperf3: increase additional wait time for iperf client by Andre Puschmann · 4 years ago
  49. 5c4c052 amarisoft_{mme,enb}: make sure mcc/mnc are zero padded by Andre Puschmann · 4 years ago
  50. 03fab09 iperf3: server: Avoid copying logfile during cleanup if already copied previously by Pau Espin Pedrol · 4 years ago
  51. 6b9a50e iperf3: Avoid creating empty log file by Pau Espin Pedrol · 4 years ago
  52. 0f7f265 4G: Add milenage support by Pau Espin Pedrol · 4 years ago
  53. f96d590 amarisoft_ltemme_ifup.sh: use ip cmd instead of ifconfig by Pau Espin Pedrol · 4 years ago
  54. 4130eef contrib/jenkins-build-amarisoft.sh: Allow generating trial without lteue by Pau Espin Pedrol · 4 years ago
  55. f1b43f9 contrib/jenkins-build-amarisoft.sh: Pass srsLTE.git branch explicitly by Pau Espin Pedrol · 4 years ago
  56. 1dddb7b srsepc.conf.tmpl: zero-pad mnc and mcc in config by Andre Puschmann · 4 years ago
  57. b92e2d1 jenkins-build-srslte.sh: pass extra configuration_opts to build_repo by Andre Puschmann · 4 years ago
  58. 008fd31 enb_amarisoft: add support for PHY signal log file by Andre Puschmann · 4 years ago
  59. 59c83a2 srsue.conf.tmpl: use UE cat 8 whenever more than one carrier is configured by Andre Puschmann · 4 years ago
  60. 69dd689 rfemu_minicircuits: reset attenuation to zero in dtor by Andre Puschmann · 4 years ago
  61. 955249d enb_amarisoft: add option to enable and configure DL AWGN channel by Andre Puschmann · 4 years ago
  62. 969a4ee Introduce stress tool object by Pau Espin Pedrol · 4 years ago
  63. 2ebcff9 enb_amarisoft: register log options as config scheme by Andre Puschmann · 4 years ago
  64. f8c99a8 ms_srs: add min_rolling_average calculation by Andre Puschmann · 4 years ago
  65. ba40fac enb_srs: remove comment introduced through copy+paste by Andre Puschmann · 4 years ago
  66. 9df7cd0 srsue.conf.tmpl: add default EARFCNs for 4xCA config by Andre Puschmann · 4 years ago
  67. 8b27ded test: append KPI rather than overwrite in set_kpi() method by Andre Puschmann · 4 years ago
  68. 0694c30 amarisoft_enb: update lteenb default parameter for PDCCH, SRS and CQI by Andre Puschmann · 4 years ago
  69. f14ff81 {ms,enb}_srs: add method to read kpi from a test run by Andre Puschmann · 4 years ago
  70. 20087ad process: provide API to return filename for process output by Andre Puschmann · 4 years ago
  71. 315b078 Drop using patchelf out of PATH by Pau Espin Pedrol · 4 years ago
  72. 82ced3f {enb,epc,ms}_srs: expose log.all_level parameter by Andre Puschmann · 4 years ago
  73. 7c1c8d6 ms_srs: fix scp-back-metrics routine by Andre Puschmann · 4 years ago
  74. d5a58d0 ltemme: add two on-demand dedicated bearer for TOS 0xb8 and 0x60 by Andre Puschmann · 4 years ago
  75. 55b455c iperf3: add getter to retrieve received bitrate by Andre Puschmann · 4 years ago
  76. 0957e9e enb: add getter for number of cells of an eNB by Andre Puschmann · 4 years ago
  77. 219ec75 iperf3: add getter to read the actual run time of an iperf client run by Andre Puschmann · 4 years ago
  78. 14bb5ff ms_osmo_mobile.py: Fix missing sublcass implementation of abstract MS methods by Pau Espin Pedrol · 4 years ago
  79. 62e887d amarisoft_enb.cfg.tmpl: expose log options by Andre Puschmann · 4 years ago
  80. cedee0a doc/manuals: Fix callout definition in code block by Pau Espin Pedrol · 4 years ago
  81. 5680255 iperf3: Add support for setting TOS by Pau Espin Pedrol · 4 years ago
  82. 229f116 iperf3: Refactor iperf3cli popen arg list generation by Pau Espin Pedrol · 4 years ago
  83. be50eae ms_srs: fix additional_args init by Andre Puschmann · 4 years ago
  84. e3d1b61 Add per-test KPI support by Pau Espin Pedrol · 4 years ago
  85. d4dc2ad selftest: Add test to verify junit xml report by Pau Espin Pedrol · 4 years ago
  86. e592de8 srs: Convert additional_args attr to list to allow combining different params by Pau Espin Pedrol · 4 years ago
  87. 393cd61 amarisoft_drb.cfg.tmpl: adjust default values for QCI 1 and 2 by Andre Puschmann · 4 years ago
  88. f678c4d iperf3: increase extra timeout to 30s by Andre Puschmann · 4 years ago
  89. 8b1547b rfemu: add max attenuation getter by Andre Puschmann · 4 years, 1 month ago
  90. ccb6320 enb_amarisoft: fix typo by Andre Puschmann · 4 years, 1 month ago
  91. b0ebcbc epc: refactor run_wait() method and rename to prepare_proc() by Andre Puschmann · 4 years, 1 month ago
  92. e66e3ae config: Allow empty config files by Pau Espin Pedrol · 4 years ago
  93. 683d196 testenv: Prepend underscor to internal method by Pau Espin Pedrol · 4 years ago
  94. c3cf682 Implement per-test timeout guard by Pau Espin Pedrol · 4 years, 1 month ago
  95. a75f85a Refactor test specific config parsing & generation by Pau Espin Pedrol · 4 years, 1 month ago
  96. 444129e test: Move duration time calculation to helper function by Pau Espin Pedrol · 4 years, 1 month ago
  97. 8cfb5d0 Remove all references to defaults: timeout: from suite.conf by Pau Espin Pedrol · 4 years, 1 month ago
  98. a9bc93d iperf3: Fix iperf3cli.launch_sync() when configured to run more than 300 sec by Pau Espin Pedrol · 4 years, 1 month ago
  99. 7c759d9 srsenb_sib.conf.tmpl: add default SIB3 by Andre Puschmann · 4 years, 1 month ago
  100. ec28572 test: Store brief log per test and use as default report_stdout by Pau Espin Pedrol · 4 years, 1 month ago