- 5f9a763 4g-iperf3-bidir: modified the test to parameterize the number of ue in the test. by AlaiaL · 3 years, 2 months ago
- 63d33de 4g-iperf3-dl: modified the test to parameterize the number of ue in the test. by AlaiaL · 3 years, 2 months ago
- 8ff2939 4g-iperf3-ul: modified the test to parameterize the number of ue in the test. by AlaiaL · 3 years, 2 months ago
- bde48c3 ping: add a short delay after UE is attached before starting ping by Andre Puschmann · 3 years, 2 months ago
- 4462067 4g: add overlay template path for all suites by Andre Puschmann · 3 years, 2 months ago
- 47f4f09 ping.py: add stricter pass/fail check by Andre Puschmann · 3 years, 3 months ago
- 6246a9d iperf3_bidir: add extra test for bi-directional iperf test by Andre Puschmann · 3 years, 4 months ago
- d1732d7 srsepc.conf.tmpl: double value of T3413 (paging timer) by Andre Puschmann · 3 years, 5 months ago
- 29263b7 4g: add checks for received PRACHs for ping tests by Andre Puschmann · 3 years, 6 months ago
- d95d494 sysmocom: Port nitb_netreg_mass suite to osmo split network by Pau Espin Pedrol · 3 years, 6 months ago
- de6743d add handover_2G suite, with handover.py test by Neels Hofmeyr · 3 years, 7 months ago
- d253a10 iperf3_{dl,ul}: adapt pass/fail threshold by Andre Puschmann · 3 years, 8 months ago
- 998be65 sysmocom: Introduce suite 4g2enb by Pau Espin Pedrol · 3 years, 8 months ago
- 17f7c38 sysmocom: emergency_preemptive_call.py: Avoid test failure if 2nd call not fully established by Pau Espin Pedrol · 3 years, 8 months ago
- 66c0542 sysmocom: Introduce test to verify emergency call preemption by Pau Espin Pedrol · 3 years, 9 months ago
- 680ba03 sysmocom: Introduce suite to test emergency calls by Pau Espin Pedrol · 3 years, 9 months ago
- 4b7c585 ms: Fix and use ms msisdn() getter by Pau Espin Pedrol · 3 years, 9 months ago
- 7d3b83e enb: incorporate number of carriers into ue_max_rate() API by Andre Puschmann · 3 years, 10 months ago
- cda03cb 4g: consider number of component carriers for max rate calculation by Andre Puschmann · 3 years, 10 months ago
- b0ebcbc epc: refactor run_wait() method and rename to prepare_proc() by Andre Puschmann · 4 years, 1 month ago
- 8cfb5d0 Remove all references to defaults: timeout: from suite.conf by Pau Espin Pedrol · 4 years, 1 month ago
- 57e37f9 suites/4g: Wait for IP addr received before trying to use the link by Pau Espin Pedrol · 4 years, 1 month ago
- 3a81a7e tests: Replace is_connected() with is_registered() by Pau Espin Pedrol · 4 years, 1 month ago
- 0767920 handover.py: fix typo in test by Andre Puschmann · 4 years, 1 month ago
- 898a5aa 4g_suite: add MT and MO test cases by Andre Puschmann · 4 years, 1 month ago
- 419a662 ms_srs: refactor UE state getter functions by Andre Puschmann · 4 years, 1 month ago
- d84a838 4g: Pass max bitrate to iperf3 by Pau Espin Pedrol · 4 years, 1 month ago
- f4ab97f iperf3: Support runing test with bidirectional data by Pau Espin Pedrol · 4 years, 1 month ago
- 3a0dea6 iperf3: Support using configuring UDP protocol by Pau Espin Pedrol · 4 years, 1 month ago
- aebaa3c suites/gprs: Catch unexpected iperf3 result content and print it by Pau Espin Pedrol · 4 years, 2 months ago
- fa02b9c suites: 4g: Parametrize handover.py test by Pau Espin Pedrol · 4 years, 2 months ago
- eaefe6b suites/4g: Introduce sample handover test by Pau Espin Pedrol · 4 years, 2 months ago
- 40c7bc7 tests: Replace 'suite' with 'tenv' by Pau Espin Pedrol · 4 years, 2 months ago
- 99bed8b Move example/ and ttcn3/ to sysmocom/ and sysmocom/ttcn3 by Pau Espin Pedrol · 4 years, 3 months ago