- 786a6bc Introduce initial Amarisoft ENB support by Pau Espin Pedrol · 4 years, 5 months ago
- 3ffea80 srs_{enb,ue}: add secondary cell and set dl/ul freq in eNB/UE config accordingly by Andre Puschmann · 4 years, 6 months ago
- d61613a srs_ue: adding num_carriers paramter and corresponding modifier by Andre Puschmann · 4 years, 6 months ago
- 82b8890 srs_enb: add num_cells param to srsENB by Andre Puschmann · 4 years, 6 months ago
- 22ec00a ms: add optional param to specify fixed APN IP address assigned to a MS by Andre Puschmann · 4 years, 6 months ago
- 35234f2 srs_ue: add scenario for airplane mode simulation in srsUE by Andre Puschmann · 4 years, 6 months ago
- bf960ec srs{enb,ue}.conf.tmpl: make sure to only use a single PHY thread when running with ZMQ by Andre Puschmann · 4 years, 6 months ago
- b778707 srsenb.conf.tmpl: update to new version by Andre Puschmann · 4 years, 6 months ago
- 1e81b5a srs{ue,enb,epc}: Disable pcap by default, allow enabling by param by Pau Espin Pedrol · 4 years, 6 months ago
- e10970d Drop wrong vty cfg line ms-power-control by Pau Espin Pedrol · 4 years, 6 months ago
- 7f37deb srsenb_sib.conf: Fix warning about wrong prach_freq_offset value by Pau Espin Pedrol · 4 years, 6 months ago
- f796ad0 srsue,srsenb: Configure num_ports for tmode > 1 by Pau Espin Pedrol · 4 years, 6 months ago
- d2e5aa5 srsenb: Update config files by Pau Espin Pedrol · 4 years, 6 months ago
- dcf99ed srsue: Enable pcap through config file by Pau Espin Pedrol · 4 years, 6 months ago
- a031995 srsue: Enable metrics csv file generation by Pau Espin Pedrol · 4 years, 6 months ago
- b693771 Introduce LTE Transmission Mode and RLC DRB mode params by Pau Espin Pedrol · 4 years, 7 months ago
- 6c42bb5 srs_enb: Make num_prb a config parameter by Pau Espin Pedrol · 4 years, 7 months ago
- a9a2fe2 srsLTE: Support configuring different RF backends by Pau Espin Pedrol · 4 years, 7 months ago
- c8b0f93 Initial srsLTE support by Pau Espin Pedrol · 4 years, 7 months ago
- 0cde25f Introduce and use osmo-bts-trx VTY cmd max_trxd_version on sysmocell-5K by Pau Espin Pedrol · 5 years ago
- b5f37ff tests: voice: Add voice call test with Osmux enabled by Pau Espin Pedrol · 5 years ago
- fed578e Introduce osmux support for msc,bsc,mgw by Pau Espin Pedrol · 5 years ago
- e524f2c virtual: Unify the lua script into a single one by Holger Hans Peter Freyther · 5 years ago
- feb66e7 Integrate osmo-{bts,pcu}-oc2g by Pau Espin Pedrol · 6 years ago
- 82feeff mobile: Switch from removed cli option to vty port by Holger Hans Peter Freyther · 6 years ago
- d2db10d ms_driver: Add a virtual bts and make use of it by Holger Hans Peter Freyther · 6 years ago
- 9ea9c65 templates: bsc/nitb: Remove explicit no force-combined-si by Pau Espin Pedrol · 6 years ago
- b656432 templates: osmo-pcu-sysmo: Set log level from dbg to info by Pau Espin Pedrol · 6 years ago
- c977547 templates: osmo-pcu: Set log level from dbg to info by Pau Espin Pedrol · 6 years ago
- 8cfa10f osmo-trx: Add support for dev-args cfg parameter by Pau Espin Pedrol · 6 years ago
- 4f23ab5 Add support to enable EGPRS by Pau Espin Pedrol · 6 years ago
- cef9c0d Drop unused sysmobts-mgr.cfg.tmpl by Pau Espin Pedrol · 6 years ago
- 1b11c59 templates: Update .cfg files to use logging level set-all by Pau Espin Pedrol · 6 years ago
- 94eab26 osmo-trx: Add multi_arfcn support by Pau Espin Pedrol · 6 years ago
- 44b7ea1 osmo-bts-trx: Add multiTRX support by Pau Espin Pedrol · 6 years ago
- 0d45504 osmo-bts-trx: Big refactor and cleanup of osmo-trx related code by Pau Espin Pedrol · 6 years ago
- 5dc2459 osmo-bsc: Parametrize codec-list VTY cfg by Pau Espin Pedrol · 6 years ago
- 722e94e Add channel_allocator cfg attr to bts resources by Pau Espin Pedrol · 6 years ago
- 5682287 osmo-bsc,msc: Set mgw local-ip in cfg.tmpl by Pau Espin Pedrol · 6 years ago
- 635f4c8 osmo-hlr.cfg.tmpl: Add ussd routing prefix for *#100# and fix expected answer format by Pau Espin Pedrol · 6 years ago
- 99efe82 ggsn: Bind VTY and CTRL ifaces to assigned ip addr by Pau Espin Pedrol · 6 years ago
- 5eb4f0e osmo_ms_driver: Use the two new config options for the mobile by Holger Hans Peter Freyther · 6 years ago
- e974944 osmo-bsc.cfg.tmpl: Remove unused nd recently removed option dest by Pau Espin Pedrol · 6 years ago
- 63f2d47 bsc: Add API to mock BSC RSL IP addr by Pau Espin Pedrol · 6 years ago
- 58cd83c templates: osmo-bts: Use BTS assigned IP addr to bind CTRL and VTY iface by Pau Espin Pedrol · 6 years ago
- 6af1c18 ms: Create template for the osmocom-bb mobile application by Holger Hans Peter Freyther · 7 years ago
- 28bcaf0 ms: Lua part of location update testing by Holger Hans Peter Freyther · 7 years ago
- 2c0ae62 templates: osmo-bsc: Remove no longer available cfgs by Pau Espin Pedrol · 6 years ago
- edcc8d2 osmo-trx: Add cfg template by Pau Espin Pedrol · 7 years ago
- 86ea02f osmo-msc: Use osmo-mgw instead of osmo-bsc_mgcp by Pau Espin Pedrol · 7 years ago
- b17295b templates: osmo-msc: Remove unused option auth policy by Pau Espin Pedrol · 7 years ago
- 3426941 templates: osmo-msc: Remove unused option reject cause by Pau Espin Pedrol · 7 years ago
- ab4a1f7 osmo-bsc.cfg.tmpl: Remove bogus VTY commands by Harald Welte · 7 years ago
- 6641994 Set osmo-ggsn ipv6 link-local addr and enable ipv6 ctx activate test by Pau Espin Pedrol · 7 years ago
- 8a3a7b5 bts_*: Add incrementing bvci and rac values by Pau Espin Pedrol · 7 years ago
- ce35d91 OsmoPcuSysmo: Integrate with Sysmobts and OsmoSgsn by Pau Espin Pedrol · 7 years ago
- e85f5c9 Add OsmoPcu class by Pau Espin Pedrol · 7 years ago
- 99f7929 Add class OsmoPcuSysmo by Pau Espin Pedrol · 7 years ago
- d0a0111 bts_*: Add ready_for_pcu API by Pau Espin Pedrol · 7 years ago
- 4796b35 Add OsmoSgsn class by Pau Espin Pedrol · 7 years ago
- 30ceb5c Add OsmoGgsn class by Pau Espin Pedrol · 7 years ago
- 0b9d091 osmo-bsc: Remove token cmd from config by Pau Espin Pedrol · 7 years ago
- b87c6bd osmo-bsc: Remove authentication cmd from config by Pau Espin Pedrol · 7 years ago
- e7ec908 osmo-bsc: Remove 'auth policy' cmd from config by Pau Espin Pedrol · 7 years ago
- 1e1d381 Configure bsc and msc to connect to the specific stp provided in test by Pau Espin Pedrol · 7 years ago
- 386b78d Require OsmoMgw in OsmoBsc and update tests by Pau Espin Pedrol · 7 years ago
- e9d4af8 Introduce OsmoMgw class (osmo-mgw) by Pau Espin Pedrol · 7 years ago
- 1f5ae7d osmo-msc: Use mgw instead of mgcpgw in cfg by Pau Espin Pedrol · 7 years ago
- 4ccce7c Use unique incrementing value for BTS CellId by Pau Espin Pedrol · 7 years ago
- daed447 Add support for osmo-bts-octphy by Pau Espin Pedrol · 7 years ago
- 7fde99a fix osmo-stp.cfg: accept-asp-connections must be a child of listen m3ua by Neels Hofmeyr · 7 years ago
- f063503 re-fix osmo-bts-trx config: 'osmotrx ip' must *not* be indented by Neels Hofmeyr · 7 years ago
- 1408976 fix osmo-bts-trx config: 'osmotrx' must be indented in 'instance 0' by Neels Hofmeyr · 7 years ago
- b26f32a nominal_power and max_power_red attrs can now be set per resource by Pau Espin Pedrol · 7 years ago
- b5a8614 Add support for authentication VTY param in msc and bsc by Pau Espin Pedrol · 7 years ago
- 404e150 bts_osmotrx: Support configuring bts addr, trx_remote_ip and launch_trx by Pau Espin Pedrol · 7 years ago
- 8d7a2e3 Increase log verbosity for osmo-bts-trx by Pau Espin Pedrol · 7 years ago
- a10aeae osmo-bts-trx config: remove settsc by Neels Hofmeyr · 7 years ago
- 329b6f4 Set osmo-bts pcu-socket config to point to run dir by Pau Espin Pedrol · 7 years ago
- 4008b69 cosmetic: osmo-msc.cfg.tmpl: fix indent by Neels Hofmeyr · 7 years ago
- a64ab70 aoip: add newly needed osmo-msc point-code config by Neels Hofmeyr · 7 years ago
- 2ec075d osmo-bsc.cfg.tmpl: add point code addresses by Alexander Couzens · 7 years ago
- ddf7812 remove timer section from osmo-{bts,bsc}.cfg.tmpl by Harald Welte · 7 years ago
- 109ebca Revert "osmo-bts-trx config: remove settsc" by Neels Hofmeyr · 7 years ago
- 72ded64 osmo-bts-trx config: remove settsc by Neels Hofmeyr · 7 years ago
- 2d16f6f Add support for SMPP testing by Pau Espin Pedrol · 7 years ago
- 59f8dfe osmo-bts-trx: set l1c logging level to notice by Neels Hofmeyr · 7 years ago
- 02a28e5 cosmetic: osmo-stp.cfg: fix indent by Neels Hofmeyr · 7 years ago
- 38b051c aoip: add osmo-stp, now required for aoip runs by Neels Hofmeyr · 7 years ago
- 7b02ed0 osmo-msc: configure HLR address by Neels Hofmeyr · 7 years ago
- db59bcf Use reserved ip address for osmo-hlr GSUP interface by Pau Espin Pedrol · 7 years ago
- fa00b0f Use reserved ip address for osmo-mgcpgw VTY interface by Pau Espin Pedrol · 7 years ago
- ea3549f Use reserved ip address for osmo-bsc ctrl interface by Pau Espin Pedrol · 7 years ago
- 48055ed fix osmo-bts-trx: add config: 'osmotrx tx-attenuation oml' by Neels Hofmeyr · 7 years ago
- 798e592 MSC+BSC: add test api to run OsmoMSC and OsmoBSC with AoIP by Neels Hofmeyr · 7 years ago
- 4f59ba6 config: nitb template: move ip_address to nitb.ip_address by Neels Hofmeyr · 7 years ago
- 76d8103 rename resource nitb_iface to ip_address by Neels Hofmeyr · 7 years ago
- 6d8e485 nitb config: set: logging color 1, category 1 by Neels Hofmeyr · 7 years ago
- 391afe3 remove bts_ocpthy.py by Neels Hofmeyr · 7 years ago
- 6ab9898 Enable GSMTAP on BTS and record it on the main unit NITB by Pau Espin Pedrol · 7 years ago