Pau Espin Pedrol | 0696c60 | 2021-03-16 14:25:37 +0100 | [diff] [blame] | 1 | # |
| 2 | # logger: |
| 3 | # |
| 4 | # o Set OGS_LOG_INFO to all domain level |
| 5 | # - If `level` is omitted, the default level is OGS_LOG_INFO) |
| 6 | # - If `domain` is omitted, the all domain level is set from 'level' |
| 7 | # (Nothing is needed) |
| 8 | # |
| 9 | # o Set OGS_LOG_ERROR to all domain level |
| 10 | # - `level` can be set with none, fatal, error, warn, info, debug, trace |
| 11 | # level: error |
| 12 | # |
| 13 | # o Set OGS_LOG_DEBUG to mme/emm domain level |
| 14 | # level: debug |
| 15 | # domain: mme,emm |
| 16 | # |
| 17 | # o Set OGS_LOG_TRACE to all domain level |
| 18 | # level: trace |
| 19 | # domain: core,s1ap,nas,fd,gtp,mme,emm,esm,event,tlv,mem,sock |
| 20 | # |
| 21 | logger: |
| 22 | file: ${mme.log_filename} |
Andre Puschmann | faa8e7c | 2021-05-10 20:50:30 +0200 | [diff] [blame] | 23 | level: info |
Pau Espin Pedrol | 0696c60 | 2021-03-16 14:25:37 +0100 | [diff] [blame] | 24 | |
| 25 | mme: |
| 26 | freeDiameter: ${mme.diameter_filename} |
| 27 | s1ap: |
| 28 | - addr: ${epc.run_addr} |
| 29 | gtpc: |
| 30 | - addr: ${epc.run_addr} |
| 31 | gummei: |
| 32 | plmn_id: |
| 33 | mcc: ${epc.mcc} |
| 34 | mnc: ${epc.mnc} |
| 35 | mme_gid: 2 |
| 36 | mme_code: 1 |
| 37 | tai: |
| 38 | plmn_id: |
| 39 | mcc: ${epc.mcc} |
| 40 | mnc: ${epc.mnc} |
| 41 | tac: 7 |
| 42 | security: |
| 43 | integrity_order : [ EIA2, EIA1, EIA0 ] |
| 44 | ciphering_order : [ EEA0, EEA1, EEA2 ] |
| 45 | network_name: |
| 46 | full: Open5GS |
Andre Puschmann | 74588e9 | 2021-05-10 21:44:24 +0200 | [diff] [blame] | 47 | short: open5gs |
Pau Espin Pedrol | 0696c60 | 2021-03-16 14:25:37 +0100 | [diff] [blame] | 48 | mme_name: open5gs-mme0 |
| 49 | |
| 50 | # |
| 51 | # sgwc: |
| 52 | # |
| 53 | # <GTP-C Client> |
| 54 | # |
| 55 | # o Specify SGW addresses the GTP-C must connect to |
| 56 | # |
| 57 | # o One SGW is defined. |
| 58 | # If prefer_ipv4 is not true, [fe80::2%lo] is selected. |
| 59 | # gtpc: |
| 60 | # addr: |
| 61 | # - 127.0.0.3 |
| 62 | # - fe80::2%lo |
| 63 | # |
| 64 | # o Two SGW are defined. MME selects SGW with round-robin manner per UE |
| 65 | # gtpc: |
| 66 | # - addr: 127.0.0.3 |
| 67 | # - addr: fe80::2%lo |
| 68 | # |
| 69 | # o Three SGW are defined. MME selects SGW with round-robin manner per UE |
| 70 | # gtpc: |
| 71 | # - addr |
| 72 | # - 127.0.0.3 |
| 73 | # - fe80::2%lo |
| 74 | # - addr |
| 75 | # - 127.0.0.22 |
| 76 | # - fe80::12%lo |
| 77 | # - name: sgw3.open5gs.org |
| 78 | # |
| 79 | # <SGW Selection Mode> |
| 80 | # |
| 81 | # o Round-Robin |
| 82 | # |
| 83 | # gtpc: |
| 84 | # addr: 127.0.0.3 |
| 85 | # addr: 127.0.2.2 |
| 86 | # addr: 127.0.4.2 |
| 87 | # |
| 88 | # o SGW selection by eNodeB TAC |
| 89 | # (either single TAC or multiple TACs, DECIMAL representation) |
| 90 | # |
| 91 | # gtpc: |
| 92 | # - addr: 127.0.0.3 |
| 93 | # tac: 26000 |
| 94 | # - addr: 127.0.2.2 |
| 95 | # tac: [25000, 27000, 28000] |
| 96 | # |
| 97 | # o SGW selection by e_cell_id(28bit) |
| 98 | # (either single or multiple e_cell_id, HEX representation) |
| 99 | # |
| 100 | # gtpc: |
| 101 | # - addr: 127.0.0.3 |
| 102 | # e_cell_id: abcde01 |
| 103 | # - addr: 127.0.2.2 |
| 104 | # e_cell_id: [12345, a9413, 98765] |
| 105 | # |
| 106 | sgwc: |
| 107 | gtpc: |
Pau Espin Pedrol | d776059 | 2021-03-31 13:35:04 +0200 | [diff] [blame] | 108 | - addr: ${epc.addr_sgwc} |
Pau Espin Pedrol | 0696c60 | 2021-03-16 14:25:37 +0100 | [diff] [blame] | 109 | |
| 110 | # |
| 111 | # smf: |
| 112 | # |
| 113 | # <GTP-C Client> |
| 114 | # |
| 115 | # o By default, the SMF uses the first SMF node. |
| 116 | # - To use a different APN for each SMF, specify gtpc.apn as the APN name. |
| 117 | # - If the HSS uses WebUI to set the SMF IP for each UE, |
| 118 | # you can use a specific SMF node for each UE. |
| 119 | # |
| 120 | # o Two SMF are defined. 127.0.0.4:2123 is used. |
| 121 | # [fe80::3%lo]:2123 is ignored. |
| 122 | # gtpc: |
| 123 | # - addr: 127.0.0.4 |
| 124 | # - addr: fe80::3%lo |
| 125 | # |
| 126 | # o One SMF is defined. if prefer_ipv4 is not true, |
| 127 | # [fe80::3%lo] is selected. |
| 128 | # gtpc: |
| 129 | # - addr: |
| 130 | # - 127.0.0.4 |
| 131 | # - fe80::3%lo |
| 132 | # |
| 133 | # o Two SMF are defined with a different APN. |
| 134 | # - Note that if SMF IP for UE is configured in HSS, |
| 135 | # the following configurion for this UE is ignored. |
| 136 | # gtpc: |
| 137 | # - addr: 127.0.0.4 |
| 138 | # apn: internet |
| 139 | # - addr: 127.0.0.5 |
| 140 | # apn: volte |
| 141 | # |
| 142 | # o If APN is omitted, the default APN uses the first SMF node. |
| 143 | # gtpc: |
| 144 | # - addr: 127.0.0.4 |
| 145 | # - addr: 127.0.0.5 |
| 146 | # apn: volte |
| 147 | smf: |
| 148 | gtpc: |
Pau Espin Pedrol | d776059 | 2021-03-31 13:35:04 +0200 | [diff] [blame] | 149 | - addr: ${epc.addr_smf} |
Pau Espin Pedrol | 0696c60 | 2021-03-16 14:25:37 +0100 | [diff] [blame] | 150 | |
| 151 | # |
| 152 | # parameter: |
| 153 | # |
| 154 | # o Number of output streams per SCTP associations. |
| 155 | # sctp_streams: 30 |
| 156 | # |
| 157 | # o Disable use of IPv4 addresses (only IPv6) |
| 158 | # no_ipv4: true |
| 159 | # |
| 160 | # o Disable use of IPv6 addresses (only IPv4) |
| 161 | # no_ipv6: true |
| 162 | # |
| 163 | # o Prefer IPv4 instead of IPv6 for estabishing new GTP connections. |
| 164 | # prefer_ipv4: true |
| 165 | # |
| 166 | # o Enable Multicast traffic to the UE |
| 167 | # multicast: true |
| 168 | # |
| 169 | # o Disable Stateless Address Autoconfiguration for IPv6 |
| 170 | # no_slaac: true |
| 171 | # |
| 172 | # o Use OAI UE |
| 173 | # - Remove HashMME in Security-mode command message |
| 174 | # - Use the length 1 of EPS network feature support in Attach accept message |
| 175 | # use_openair: true |
| 176 | # |
| 177 | parameter: |
| 178 | |
| 179 | # |
| 180 | # max: |
| 181 | # |
| 182 | # o Maximum Number of UE per AMF/MME |
| 183 | # ue: 1024 |
| 184 | # o Maximum Number of gNB/eNB per AMF/MME |
| 185 | # gnb: 32 |
| 186 | # |
| 187 | max: |
| 188 | |
| 189 | # |
| 190 | # pool: |
| 191 | # |
| 192 | # o The default memory pool size was set assuming 1024 UEs. |
| 193 | # To connect more UEs, you need to increase the size further. |
| 194 | # |
| 195 | # - Pool-size 128 => 65536 Number |
| 196 | # - Pool-size 256 => 16384 Number |
| 197 | # - Pool-size 512 => 4096 Number |
| 198 | # - Pool-size 1024 => 1024 Number |
| 199 | # - Pool-size 2048 => 512 Number |
| 200 | # - Pool-size 8192 => 128 Number |
| 201 | # - Pool-size 1024*1024 => 8 Number |
| 202 | # |
| 203 | # 128: 65536 |
| 204 | # 256: 16384 |
| 205 | # 512: 4096 |
| 206 | # 1024: 1024 |
| 207 | # 2048: 512 |
| 208 | # 8192: 128 |
| 209 | # big: 8 |
| 210 | # |
| 211 | pool: |
| 212 | |
| 213 | # |
| 214 | # sctp: |
| 215 | # |
| 216 | # o heartbit_interval : 5000 (5secs) |
| 217 | # o rto_initial : 3000 (3secs) |
| 218 | # o rto_min : 1000 (1sec) |
| 219 | # o rto_max : 5000 (5secs) |
| 220 | # o max_num_of_ostreams : 30 |
| 221 | # o max_num_of_istreams : 65535 |
| 222 | # o max_attempts : 4 |
| 223 | # o max_initial_timeout : 8000(8secs) |
| 224 | # o usrsctp_udp_port : 9899 |
| 225 | # |
| 226 | sctp: |
| 227 | |
| 228 | # |
| 229 | # time: |
| 230 | # |
| 231 | # o Message Wait Duration (Default : 10,000 ms = 10 seconds) |
| 232 | # |
| 233 | # o Message Wait Duration (3000 ms) |
| 234 | # message: |
| 235 | # duration: 3000 |
| 236 | # |
| 237 | # o Handover Wait Duration (Default : 300 ms) |
| 238 | # Time to wait for MME to send UEContextReleaseCommand |
| 239 | # to the source eNB after receiving HandoverNotify |
| 240 | # |
| 241 | # o Handover Wait Duration (500ms) |
| 242 | # handover: |
| 243 | # duration: 500 |
| 244 | time: |