| - Testing: fill a config file with values |
| cnf Templates: DBG: rendering osmo-nitb.cfg.tmpl [osmo-nitb.cfg.tmpl↪Templates] |
| ! Configuration rendered by osmo-gsm-tester |
| password foo |
| ! |
| log stderr |
| logging filter all 1 |
| logging color 0 |
| logging print category 0 |
| logging print extended-timestamp 1 |
| logging level all debug |
| ! |
| line vty |
| no login |
| bind val_nitb_iface_addr |
| ! |
| e1_input |
| e1_line 0 driver ipa |
| ipa bind val_nitb_iface_addr |
| network |
| network country code val_mcc |
| mobile network code val_mnc |
| short name val_short_name |
| long name val_long_name |
| auth policy val_auth_policy |
| location updating reject cause 13 |
| encryption val_encryption |
| neci 1 |
| rrlp mode none |
| mm info 1 |
| handover 0 |
| handover window rxlev averaging 10 |
| handover window rxqual averaging 1 |
| handover window rxlev neighbor averaging 10 |
| handover power budget interval 6 |
| handover power budget hysteresis 3 |
| handover maximum distance 9999 |
| timer t3101 10 |
| timer t3103 0 |
| timer t3105 0 |
| timer t3107 0 |
| timer t3109 4 |
| timer t3111 0 |
| timer t3113 60 |
| timer t3115 0 |
| timer t3117 0 |
| timer t3119 0 |
| timer t3141 0 |
| bts 0 |
| type val_type_bts0 |
| band val_band_bts0 |
| cell_identity 0 |
| location_area_code val_bts.location_area_code_bts0 |
| training_sequence_code 7 |
| base_station_id_code val_bts.base_station_id_code_bts0 |
| ms max power 15 |
| cell reselection hysteresis 4 |
| rxlev access min 0 |
| channel allocator ascending |
| rach tx integer 9 |
| rach max transmission 7 |
| ip.access unit_id val_bts.unit_id_bts0 0 |
| oml ip.access stream_id val_bts.stream_id_bts0 line 0 |
| gprs mode none |
| trx 0 |
| rf_locked 0 |
| arfcn val_trx_arfcn_trx0 |
| nominal power 23 |
| max_power_red val_trx_max_power_red_trx0 |
| rsl e1 tei 0 |
| timeslot 0 |
| phys_chan_config val_phys_chan_config_0 |
| timeslot 1 |
| phys_chan_config val_phys_chan_config_1 |
| timeslot 2 |
| phys_chan_config val_phys_chan_config_2 |
| timeslot 3 |
| phys_chan_config val_phys_chan_config_3 |
| trx 1 |
| rf_locked 0 |
| arfcn val_trx_arfcn_trx1 |
| nominal power 23 |
| max_power_red val_trx_max_power_red_trx1 |
| rsl e1 tei 0 |
| timeslot 0 |
| phys_chan_config val_phys_chan_config_0 |
| timeslot 1 |
| phys_chan_config val_phys_chan_config_1 |
| timeslot 2 |
| phys_chan_config val_phys_chan_config_2 |
| timeslot 3 |
| phys_chan_config val_phys_chan_config_3 |
| bts 1 |
| type val_type_bts1 |
| band val_band_bts1 |
| cell_identity 0 |
| location_area_code val_bts.location_area_code_bts1 |
| training_sequence_code 7 |
| base_station_id_code val_bts.base_station_id_code_bts1 |
| ms max power 15 |
| cell reselection hysteresis 4 |
| rxlev access min 0 |
| channel allocator ascending |
| rach tx integer 9 |
| rach max transmission 7 |
| ip.access unit_id val_bts.unit_id_bts1 0 |
| oml ip.access stream_id val_bts.stream_id_bts1 line 0 |
| gprs mode none |
| trx 0 |
| rf_locked 0 |
| arfcn val_trx_arfcn_trx0 |
| nominal power 23 |
| max_power_red val_trx_max_power_red_trx0 |
| rsl e1 tei 0 |
| timeslot 0 |
| phys_chan_config val_phys_chan_config_0 |
| timeslot 1 |
| phys_chan_config val_phys_chan_config_1 |
| timeslot 2 |
| phys_chan_config val_phys_chan_config_2 |
| timeslot 3 |
| phys_chan_config val_phys_chan_config_3 |
| trx 1 |
| rf_locked 0 |
| arfcn val_trx_arfcn_trx1 |
| nominal power 23 |
| max_power_red val_trx_max_power_red_trx1 |
| rsl e1 tei 0 |
| timeslot 0 |
| phys_chan_config val_phys_chan_config_0 |
| timeslot 1 |
| phys_chan_config val_phys_chan_config_1 |
| timeslot 2 |
| phys_chan_config val_phys_chan_config_2 |
| timeslot 3 |
| phys_chan_config val_phys_chan_config_3 |
| smpp |
| local-tcp-ip val_nitb_iface_addr 2775 |
| system-id test |
| policy closed |
| esme test |
| password test |
| default-route |
| ctrl |
| bind val_nitb_iface_addr |
| |
| - Testing: expect to fail on invalid templates dir |
| sucess: setting non-existing templates dir raised RuntimeError |
| |