| - Testing: fill a config file with values |
| cnf Templates: DBG: rendering osmo-nitb.cfg.tmpl |
| ! Configuration rendered by osmo-gsm-tester |
| password foo |
| ! |
| log stderr |
| logging filter all 1 |
| logging color 1 |
| logging print category 1 |
| logging print extended-timestamp 1 |
| logging level all debug |
| ! |
| line vty |
| no login |
| bind val_ip_address |
| ! |
| e1_input |
| e1_line 0 driver ipa |
| ipa bind val_ip_address |
| network |
| network country code val_mcc |
| mobile network code val_mnc |
| short name val_short_name |
| long name val_long_name |
| auth policy val_auth_policy |
| location updating reject cause 13 |
| encryption val_encryption |
| neci 1 |
| rrlp mode none |
| mm info 1 |
| handover 0 |
| handover window rxlev averaging 10 |
| handover window rxqual averaging 1 |
| handover window rxlev neighbor averaging 10 |
| handover power budget interval 6 |
| handover power budget hysteresis 3 |
| handover maximum distance 9999 |
| bts 0 |
| type val_type_bts0 |
| band val_band_bts0 |
| cell_identity val_bts.cell_identity_bts0 |
| location_area_code val_bts.location_area_code_bts0 |
| training_sequence_code 7 |
| base_station_id_code val_bts.base_station_id_code_bts0 |
| ms max power 33 |
| cell reselection hysteresis 4 |
| rxlev access min 0 |
| channel allocator ascending |
| rach tx integer 9 |
| rach max transmission 7 |
| ip.access unit_id val_bts.unit_id_bts0 0 |
| oml ip.access stream_id val_bts.stream_id_bts0 line 0 |
| gprs mode gprs |
| gprs routing area val_bts.routing_area_code_bts0 |
| gprs network-control-order nc1 |
| gprs cell bvci val_bts.bvci_bts0 |
| gprs cell timer blocking-timer 3 |
| gprs cell timer blocking-retries 3 |
| gprs cell timer unblocking-retries 3 |
| gprs cell timer reset-timer 3 |
| gprs cell timer reset-retries 3 |
| gprs cell timer suspend-timer 10 |
| gprs cell timer suspend-retries 3 |
| gprs cell timer resume-timer 10 |
| gprs cell timer resume-retries 3 |
| gprs cell timer capability-update-timer 10 |
| gprs cell timer capability-update-retries 3 |
| gprs nsei val_bts.bvci_bts0 |
| gprs ns timer tns-block 3 |
| gprs ns timer tns-block-retries 3 |
| gprs ns timer tns-reset 3 |
| gprs ns timer tns-reset-retries 3 |
| gprs ns timer tns-test 30 |
| gprs ns timer tns-alive 3 |
| gprs ns timer tns-alive-retries 10 |
| gprs nsvc 0 nsvci val_bts.bvci_bts0 |
| gprs nsvc 0 local udp port 23020 |
| gprs nsvc 0 remote udp port 23000 |
| gprs nsvc 0 remote ip val_bts.sgsn_ip_addr_bts0 |
| no force-combined-si |
| trx 0 |
| rf_locked 0 |
| arfcn val_trx_arfcn_trx0 |
| nominal power val_trx_nominal_power_trx0 |
| max_power_red val_trx_max_power_red_trx0 |
| rsl e1 tei 0 |
| timeslot 0 |
| phys_chan_config val_phys_chan_config_0 |
| timeslot 1 |
| phys_chan_config val_phys_chan_config_1 |
| timeslot 2 |
| phys_chan_config val_phys_chan_config_2 |
| timeslot 3 |
| phys_chan_config val_phys_chan_config_3 |
| trx 1 |
| rf_locked 0 |
| arfcn val_trx_arfcn_trx1 |
| nominal power val_trx_nominal_power_trx1 |
| max_power_red val_trx_max_power_red_trx1 |
| rsl e1 tei 0 |
| timeslot 0 |
| phys_chan_config val_phys_chan_config_0 |
| timeslot 1 |
| phys_chan_config val_phys_chan_config_1 |
| timeslot 2 |
| phys_chan_config val_phys_chan_config_2 |
| timeslot 3 |
| phys_chan_config val_phys_chan_config_3 |
| bts 1 |
| type val_type_bts1 |
| band val_band_bts1 |
| cell_identity val_bts.cell_identity_bts1 |
| location_area_code val_bts.location_area_code_bts1 |
| training_sequence_code 7 |
| base_station_id_code val_bts.base_station_id_code_bts1 |
| ms max power 33 |
| cell reselection hysteresis 4 |
| rxlev access min 0 |
| channel allocator ascending |
| rach tx integer 9 |
| rach max transmission 7 |
| ip.access unit_id val_bts.unit_id_bts1 0 |
| oml ip.access stream_id val_bts.stream_id_bts1 line 0 |
| gprs mode gprs |
| gprs routing area val_bts.routing_area_code_bts1 |
| gprs network-control-order nc1 |
| gprs cell bvci val_bts.bvci_bts1 |
| gprs cell timer blocking-timer 3 |
| gprs cell timer blocking-retries 3 |
| gprs cell timer unblocking-retries 3 |
| gprs cell timer reset-timer 3 |
| gprs cell timer reset-retries 3 |
| gprs cell timer suspend-timer 10 |
| gprs cell timer suspend-retries 3 |
| gprs cell timer resume-timer 10 |
| gprs cell timer resume-retries 3 |
| gprs cell timer capability-update-timer 10 |
| gprs cell timer capability-update-retries 3 |
| gprs nsei val_bts.bvci_bts1 |
| gprs ns timer tns-block 3 |
| gprs ns timer tns-block-retries 3 |
| gprs ns timer tns-reset 3 |
| gprs ns timer tns-reset-retries 3 |
| gprs ns timer tns-test 30 |
| gprs ns timer tns-alive 3 |
| gprs ns timer tns-alive-retries 10 |
| gprs nsvc 0 nsvci val_bts.bvci_bts1 |
| gprs nsvc 0 local udp port 23020 |
| gprs nsvc 0 remote udp port 23000 |
| gprs nsvc 0 remote ip val_bts.sgsn_ip_addr_bts1 |
| no force-combined-si |
| trx 0 |
| rf_locked 0 |
| arfcn val_trx_arfcn_trx0 |
| nominal power val_trx_nominal_power_trx0 |
| max_power_red val_trx_max_power_red_trx0 |
| rsl e1 tei 0 |
| timeslot 0 |
| phys_chan_config val_phys_chan_config_0 |
| timeslot 1 |
| phys_chan_config val_phys_chan_config_1 |
| timeslot 2 |
| phys_chan_config val_phys_chan_config_2 |
| timeslot 3 |
| phys_chan_config val_phys_chan_config_3 |
| trx 1 |
| rf_locked 0 |
| arfcn val_trx_arfcn_trx1 |
| nominal power val_trx_nominal_power_trx1 |
| max_power_red val_trx_max_power_red_trx1 |
| rsl e1 tei 0 |
| timeslot 0 |
| phys_chan_config val_phys_chan_config_0 |
| timeslot 1 |
| phys_chan_config val_phys_chan_config_1 |
| timeslot 2 |
| phys_chan_config val_phys_chan_config_2 |
| timeslot 3 |
| phys_chan_config val_phys_chan_config_3 |
| smpp |
| local-tcp-ip val_ip_address 2775 |
| system-id test-nitb |
| policy val_smsc_policy |
| esme val_system_id_esme0 |
| password val_password_esme0 |
| default-route |
| esme val_system_id_esme1 |
| no password |
| default-route |
| ctrl |
| bind val_ip_address |
| |
| - Testing: expect to fail on invalid templates dir |
| sucess: setting non-existing templates dir raised RuntimeError |
| |