Max | 2b6d272 | 2016-05-04 16:37:36 +0200 | [diff] [blame] | 1 | [[control]] |
| 2 | == Control interface |
| 3 | |
| 4 | The actual protocol is described in <<common-control-if>>, the variables |
| 5 | common to all programs using it are described in <<ctrl_common_vars>>. Here we |
| 6 | describe variables specific to OsmoSGSN. |
| 7 | |
| 8 | .Variables available over control interface |
| 9 | [options="header",width="100%",cols="20%,5%,5%,50%,20%"] |
| 10 | |=== |
| 11 | |Name|Access|Trap|Value|Comment |
| 12 | |subscriber-list-active-v1|RO|No|"<imsi>,<addr>"|See <<subs>> for details. |
| 13 | |=== |
| 14 | |
| 15 | [[subs]] |
| 16 | === subscriber-list-active-v1 |
| 17 | |
| 18 | Return the list of active subscribers as a concatenated set of pairs "<imsi>", |
| 19 | "addr" where first element of the pair is subscriber's IMSI and the second |
| 20 | element (which might be empty) is the subscriber's address. The address value |
| 21 | might be "none", "invalid" and "PPP" in addition to actual IP address. In case |
| 22 | of IP address it will be prefixed with "IPv4" or "IPv6" string depending on the |
| 23 | version of IP protocol. |