osmo-gbproxy (1.6.0) unstable; urgency=medium | |
[ Neels Hofmeyr ] | |
* manual: explain IuPS, add SCCP/M3UA section from common chapters | |
[ Eric ] | |
* tests: dlopen does not imply availability of dlsym.. | |
* configure.ac: fix libtool issue with clang and sanitizer | |
[ Harald Welte ] | |
* gtphub_test: Fix compilation with gcc-10 | |
[ Oliver Smith ] | |
* contrib: import RPM spec | |
* contrib: integrate RPM spec | |
* Makefile.am: EXTRA_DIST: debian, contrib/*.spec.in | |
[ Neels Hofmeyr ] | |
* gbproxy_test.c: fix mobile identity test data | |
* use new osmo_mobile_identity API everywhere | |
[ Harald Welte ] | |
* *.spec.in: Use %config(noreplace) to retain current config file | |
[ Alexander Couzens ] | |
* gtphub: rename sgsn's oww osmo_sockaddr into sgsn_sockaddr | |
[ Vadim Yanitskiy ] | |
* debian/control: change maintainer to the Osmocom team / mailing list | |
[ Pau Espin Pedrol ] | |
* configure.ac: Fix trailing whitespace | |
* doc: Update VTY reference xml file | |
* Support setting rt-prio and cpu-affinity mask through VTY | |
[ Daniel Willmann ] | |
* gbproxy-usermanual: Explain BSSGP/BVC handling | |
[ Alexander Couzens ] | |
* gtphub_test: fix compilation error on gcc 10.2.0 | |
[ Pau Espin Pedrol ] | |
* contrib/jenkins: Enable parallel make in make distcheck | |
[ Keith ] | |
* VTY: Add gtp state-dir command | |
[ Alexander Couzens ] | |
* Port gbproxy to NS2 | |
[ Daniel Willmann ] | |
* gbproxy: Whitespace fixes | |
* gbproxy: Add todo for BVC RESET logic | |
* gbproxy: Get the peer if paging by BVCI on SIG_BVC | |
* Let libosmocore handle VTY parent node tracking | |
* osmo-gbproxy: Free msgb in ns2 prim callback | |
* configure.ac: Require python3 for ext_tests | |
* osmo-gbproxy: Implement nsvc-state ctrl command | |
[ Harald Welte ] | |
* gbproxy: Properly implement paging to LAC/RAC | |
* gbproxy: Implement paging to entire BSS area | |
[ Pau Espin Pedrol ] | |
* gbproxy: generate coredump and exit upon SIGABRT received | |
[ Harald Welte ] | |
* gbproxy: Pass TLLI as LSP towards NS to facilitate load sharing | |
* gb_proxy_peer: Add some FIXMEs regarding invalid assumptions | |
[ Daniel Willmann ] | |
* gbproxy: Remove test testing NSVCI change | |
* gbproxy: Add NSE peer that can have multiple gbproxy_peers | |
* gbproxy: Ensure BVC0 is reset before handling PtP BVCs | |
* gbproxy: Only send paging to each matching NSE once | |
* gbproxy: Separate function to move gbproxy_peer to different nse | |
[ Harald Welte ] | |
* gb_proxy: More precise + readable log messages | |
[ Daniel Willmann ] | |
* gbproxy: Add logging macros for NSE and BVC | |
* gbproxy: Use LOG macros for NSE/BVC | |
* gbproxy: Change generic LOG messages so BVCI/NSEI fmt is consistent | |
* gbproxy: Add todos encountered while going through the code | |
[ Harald Welte ] | |
* gb_proxy: Broadcast SGSN-INVOKE-TRACE and OVERLOAD | |
* gbproxy: Move BSS-side BVC-RESET processing to its own function | |
* gb_proxy: Slightly restructure processing of BSS-originated BVC-RESET | |
* gbproxy: Cosmetics: use longer lines | |
[ Daniel Willmann ] | |
* gbproxy: Add BVC log filters | |
* gbproxy: Add newline to log message | |
* gbproxy: Allow gbproxy_nse_free(NULL) | |
* gbproxy: Delete gbproxy_nse in delete-gbproxy-peer VTY command | |
[ Harald Welte ] | |
* gbproxy: Send BVC-STATUS if BSS sends us BVC-RESET without mandatory IEs | |
* gb_proxy: Use TLVP_PRES_LEN instead of TLVP_PRESENT | |
* gb_proxy: Rename gbproxy_peer to gbproxy_bvc | |
* gbproxy: Rename gbproxy_cfg.nses to gbproxy_cfg.bss_nses | |
* gbproxy: convert bss_nses from llist_head to hashtable | |
* gbproxy: convert nse->bvcs from llist_head to hashtable | |
* gbproxy: Remove patching, TLLI-tracking and SGSN2 support | |
* gb_proxy: cosmetic: Use function rather than open-coding is_sgsn | |
* gbproxy: Delete gbproxy_test | |
* gb_proxy: Introduce more validation / constraint checks | |
* gbproxy: use gbprox_relay2peer() whenever possible | |
* gb_proxy: Use osmo_tlv_prot_parse() to validate mandatory IEs | |
* gbproxy: Log FSM timeouts | |
* migrate to DLBSSGP as log sub-system for BSSGP | |
* gbproxy major rewrite for SGSN pool support | |
* gbproxy: Use "(nsei << 16) | bvci" as rate_ctr_group index | |
* gbproxy: Introduce new DOBJ log category; log object allocation/release | |
* gbproxy: Don't create an extra msgb copy for SGSN DL SIG | |
* gbproxy: Implement handling of BVC Flow Control | |
[ Daniel Willmann ] | |
* gbproxy: Fix bvci check in gbprox_rx_ptp_from_* | |
[ Harald Welte ] | |
* gbproxy: Copy RA-ID from BSS side BVC to CELL and SGSN-side BVC | |
* gbproxy: (Re)allocate SGSN-side PTP BVC even if CELL already exists | |
* gbproxy: Fix segfault when receiving PAGING for unknown destination | |
* gbproxy: Add FSM related VTY commands | |
* gbproxy: Implement scaling of BVC flow control in SGSN pool | |
* gbproxy: Improve VTY state introspection | |
* gbproxy: rename vty command "show gbproxy ..." to "show gbproxy bvc ..." | |
[ Daniel Willmann ] | |
* osmo-gbproxy: Initialize all hash_maps | |
* gbproxy: Fix confusing log message in gbprox_relay2nse | |
[ Harald Welte ] | |
* gbproxy: Add "show gbproxy cell ..." VTY command | |
[ Daniel Willmann ] | |
* gbproxy: Add SGSN NRI configuration | |
* gbproxy: Add SGSN pooling support | |
* gbproxy: Add comments to sgsn functions | |
[ Harald Welte ] | |
* gbproxy: Fix build on Deiban 8 | |
[ Alexander Couzens ] | |
* sgsn: Use the new NS2 api | |
* gbproxy: use ns2 vty2 | |
[ Daniel Willmann ] | |
* gbproxy: Add config option to name an SGSN | |
* gbproxy: Add VTY command to override the node selection function | |
[ Vadim Yanitskiy ] | |
* gb_proxy_peer: sgsn can never be NULL in gbproxy_sgsn_by_nri() | |
* gb_proxy_peer: fix NULL pointer dereference in gbproxy_sgsn_alloc() | |
[ Daniel Willmann ] | |
* Fix gbproxy_sgsn_by_tlli wraparound | |
[ Alexander Couzens ] | |
* configure.ac: define a c standard instead of using the compilers default | |
[ Daniel Willmann ] | |
* gbproxy: Implement TLLI cache and use it for SUSPEND/RESUME | |
* gbproxy: Increase TLLI cache timeout to 10s | |
[ Oliver Smith ] | |
* contrib/jenkins: don't build osmo-gsm-manuals | |
[ Daniel Willmann ] | |
* gbproxy: Implement IMSI cache | |
* gbproxy: Use IMSI cache to handle PAGING_PS_REJECT | |
* gbproxy: Use C-style comments | |
* gbproxy: Move helper function to a more logical place | |
* gbproxy: Remove unused variable assignment | |
* gbproxy: Fix VTY cmd name | |
* gbproxy: Define and use help string for gbproxy | |
* gbproxy: Add VTY commands to query the TLLI/IMSI cache | |
[ Harald Welte ] | |
* gb_proxy: Don't use orphan log subsystem DPCU | |
[ Daniel Willmann ] | |
* gbproxy: Use IMSI cache for PTP paging and implement DUMMY_PAGING_PS | |
* gbproxy: Print the correct message type for dummy paging/paging reject | |
* gbproxy: Improve log messages in gbproxy_select_sgsn | |
* gbproxy: Fix radio status routing by TMSI | |
[ Alexander Couzens ] | |
* follow libosmocore/gprs_ns2 API changes of GPRS enums | |
[ Harald Welte ] | |
* gbproxy: Avoid depending on any of the SGSN code | |
[ Daniel Willmann ] | |
* manual/gbproxy: Update overview chapter | |
* Rename OsmoGbPROXY -> *Proxy | |
* manuals/gbproxy: Update configuration chapter | |
* manuals/gbproxy: Add osmo-bsc MSC pooling chapter from Neels as a base | |
* manuals/gbproxy: MSC -> SGSN for pooling chapter | |
* manuals/gbproxy: Move pooling to separate chapter | |
[ Alexander Couzens ] | |
* gbproxy: follow gprs_ns2 API vty changes | |
* sgsn: migrate to the new gprs_ns2_vty configuration | |
* follow libosmocore/gprs_ns2 API changes (gprs_ns2_dynamic_create_nse) | |
[ Oliver Smith ] | |
* === Split osmo-gbproxy from osmo-sgsn === | |
-- Oliver Smith <osmith@sysmocom.de> Fri, 29 Jan 2021 12:57:28 +0100 |