Harald Welte | cf3eec2 | 2020-09-04 14:48:21 +0200 | [diff] [blame] | 1 | Generated by EAGLE CAM Processor 7.7.0 |
| 2 | |
| 3 | Photoplotter Info File: /space/home/laforge/projects/git/osmo-e1-xcvr/hardware/gerber/e1_xcvr.gpi |
| 4 | |
| 5 | Date : 20.12.19 23:55 |
| 6 | Plotfile : /space/home/laforge/projects/git/osmo-e1-xcvr/hardware/gerber/e1_xcvr.gtl |
| 7 | Apertures : generated: |
| 8 | Device : Gerber RS-274-X photoplotter, coordinate format 2.5 inch |
| 9 | |
| 10 | Parameter settings: |
| 11 | |
| 12 | Emulate Apertures : no |
| 13 | Tolerance Draw + : 0.00 % |
| 14 | Tolerance Draw - : 0.00 % |
| 15 | Tolerance Flash + : 0.00 % |
| 16 | Tolerance Flash - : 0.00 % |
| 17 | Rotate : no |
| 18 | Mirror : no |
| 19 | Optimize : yes |
| 20 | Auto fit : yes |
| 21 | OffsetX : 0inch |
| 22 | OffsetY : 0inch |
| 23 | |
| 24 | Plotfile Info: |
| 25 | |
| 26 | Coordinate Format : 2.5 |
| 27 | Coordinate Units : Inch |
| 28 | Data Mode : Absolute |
| 29 | Zero Suppression : None |
| 30 | End Of Block : * |
| 31 | |
| 32 | Apertures used: |
| 33 | |
| 34 | Code Shape Size used |
| 35 | |
| 36 | D10 draw 0.0000inch 6 |
| 37 | D11 draw 0.0080inch 90 |
| 38 | D12 draw 0.0059inch 44 |
| 39 | D13 draw 0.0118inch 35 |
| 40 | D14 octagon 0.0600inch 20 |
| 41 | D15 draw 0.0125inch 16 |
| 42 | D16 draw 0.0094inch 20 |
| 43 | D17 draw 0.0142inch 6 |
| 44 | D18 draw 0.0198inch 8 |
| 45 | D19 draw 0.0560inch 7 |
| 46 | D20 draw 0.0083inch 6 |
| 47 | D21 round 0.0550inch 16 |
| 48 | D22 draw 0.0065inch 5 |
| 49 | D23 draw 0.0199inch 1 |
| 50 | D24 draw 0.0177inch 4 |
| 51 | D25 octagon 0.0850inch 4 |
| 52 | D26 draw 0.0138inch 4 |
| 53 | D27 draw 0.0120inch 205 |
| 54 | D28 draw 0.0160inch 3645 |
| 55 | D29 round 0.0356inch 57 |
| 56 | D30 round 0.2362inch 4 |
| 57 | D31 draw 0.0200inch 3 |
| 58 | D32 draw 0.0100inch 6 |
| 59 | D33 draw 0.0240inch 1 |
| 60 | |