laforge.lbr: repair PULSE_T1094NL footprint and symbol (solves OSM#3270)
... and OSM#3271. - The transformer symbol is made of two identical coils
and hence it is not possible to mark the "2:" side (pins 9-11) separately.
But the naming of this coil was changed in a way, that, when invoked, the
"2" of the subpart name "TR1-1:2" shows towards the pins 9-11.
Maybe we should evolve to a device symbol with two coils merged rather than
two identical but separated, then an individual naming could honour the
2:1 side and can not be disturbed by e.g. subsequent mirroring. -
Also repaired the name and value designators' layer association.
diff --git a/hardware/eagle/laforge.lbr b/hardware/eagle/laforge.lbr
index eb63b47..f5301f9 100644
--- a/hardware/eagle/laforge.lbr
+++ b/hardware/eagle/laforge.lbr
@@ -1,12 +1,12 @@
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="6.2">
+<eagle version="7.6.0">
<drawing>
<settings>
<setting alwaysvectorfont="no"/>
<setting verticaltext="up"/>
</settings>
-<grid distance="1.27" unitdist="mm" unit="mm" style="lines" multiple="1" display="yes" altdistance="0.635" altunitdist="mm" altunit="mm"/>
+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
<layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
@@ -426,22 +426,22 @@
<rectangle x1="-4.1999" y1="4.95" x2="-3.8001" y2="6.1001" layer="51"/>
</package>
<package name="PULSE_BH">
-<smd name="P$1" x="4.1" y="4.25" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$2" x="4.1" y="2.98" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$3" x="4.1" y="1.71" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$4" x="4.1" y="0.44" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$5" x="4.1" y="-0.83" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$6" x="4.1" y="-2.1" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$7" x="4.1" y="-3.37" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$8" x="4.1" y="-4.64" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$9" x="-4.23" y="-4.64" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$10" x="-4.23" y="-3.37" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$11" x="-4.23" y="-2.1" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$12" x="-4.23" y="-0.83" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$13" x="-4.23" y="0.44" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$14" x="-4.23" y="1.71" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$15" x="-4.23" y="2.98" dx="1.27" dy="0.635" layer="1"/>
-<smd name="P$16" x="-4.23" y="4.25" dx="1.27" dy="0.635" layer="1"/>
+<smd name="16" x="4.1" y="4.25" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="15" x="4.1" y="2.98" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="14" x="4.1" y="1.71" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="13" x="4.1" y="0.44" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="12" x="4.1" y="-0.83" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="11" x="4.1" y="-2.1" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="10" x="4.1" y="-3.37" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="9" x="4.1" y="-4.64" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="8" x="-4.23" y="-4.64" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="7" x="-4.23" y="-3.37" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="6" x="-4.23" y="-2.1" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="5" x="-4.23" y="-0.83" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="4" x="-4.23" y="0.44" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="3" x="-4.23" y="1.71" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="2" x="-4.23" y="2.98" dx="1.27" dy="0.635" layer="1" roundness="50"/>
+<smd name="1" x="-4.23" y="4.25" dx="1.27" dy="0.635" layer="1" roundness="50"/>
<wire x1="-3.625" y1="6.22" x2="-3.625" y2="-6.61" width="0.127" layer="47"/>
<wire x1="-3.625" y1="-6.61" x2="3.485" y2="-6.61" width="0.127" layer="47"/>
<wire x1="-3.625" y1="6.22" x2="3.485" y2="6.22" width="0.127" layer="47"/>
@@ -2817,38 +2817,38 @@
<wire x1="5.08" y1="-5.08" x2="5.08" y2="0" width="0.254" layer="94"/>
</symbol>
<symbol name="E1_MAGNETICS">
-<wire x1="-7.62" y1="-7.62" x2="-3.175" y2="-7.62" width="0.1524" layer="94"/>
-<wire x1="-7.62" y1="0" x2="-3.175" y2="0" width="0.1524" layer="94"/>
-<wire x1="-7.62" y1="7.62" x2="-3.175" y2="7.62" width="0.1524" layer="94"/>
-<wire x1="-3.175" y1="0" x2="-3.175" y2="2.54" width="0.1524" layer="94" curve="180"/>
-<wire x1="-3.175" y1="2.54" x2="-3.175" y2="5.08" width="0.1524" layer="94" curve="180"/>
-<wire x1="-3.175" y1="5.08" x2="-3.175" y2="7.62" width="0.1524" layer="94" curve="180"/>
-<wire x1="-3.175" y1="-2.54" x2="-3.175" y2="0" width="0.1524" layer="94" curve="180"/>
-<wire x1="-3.175" y1="-5.08" x2="-3.175" y2="-2.54" width="0.1524" layer="94" curve="180"/>
-<wire x1="-3.175" y1="-7.62" x2="-3.175" y2="-5.08" width="0.1524" layer="94" curve="180"/>
-<wire x1="-0.635" y1="6.35" x2="-0.635" y2="-6.35" width="0.635" layer="94"/>
-<wire x1="0.635" y1="6.35" x2="0.635" y2="-6.35" width="0.635" layer="94"/>
+<wire x1="7.62" y1="-7.62" x2="3.175" y2="-7.62" width="0.1524" layer="94"/>
+<wire x1="7.62" y1="0" x2="3.175" y2="0" width="0.1524" layer="94"/>
+<wire x1="7.62" y1="7.62" x2="3.175" y2="7.62" width="0.1524" layer="94"/>
<wire x1="3.175" y1="0" x2="3.175" y2="2.54" width="0.1524" layer="94" curve="-180"/>
<wire x1="3.175" y1="2.54" x2="3.175" y2="5.08" width="0.1524" layer="94" curve="-180"/>
<wire x1="3.175" y1="5.08" x2="3.175" y2="7.62" width="0.1524" layer="94" curve="-180"/>
<wire x1="3.175" y1="-2.54" x2="3.175" y2="0" width="0.1524" layer="94" curve="-180"/>
<wire x1="3.175" y1="-5.08" x2="3.175" y2="-2.54" width="0.1524" layer="94" curve="-180"/>
<wire x1="3.175" y1="-7.62" x2="3.175" y2="-5.08" width="0.1524" layer="94" curve="-180"/>
-<wire x1="3.175" y1="7.62" x2="8.89" y2="7.62" width="0.1524" layer="94"/>
-<wire x1="8.89" y1="-7.62" x2="3.175" y2="-7.62" width="0.1524" layer="94"/>
-<wire x1="3.175" y1="0" x2="8.89" y2="0" width="0.1524" layer="94"/>
-<circle x="-3.175" y="6.35" radius="0.381" width="0" layer="94"/>
-<circle x="-3.175" y="-1.27" radius="0.381" width="0" layer="94"/>
+<wire x1="0.635" y1="6.35" x2="0.635" y2="-6.35" width="0.635" layer="94"/>
+<wire x1="-0.635" y1="6.35" x2="-0.635" y2="-6.35" width="0.635" layer="94"/>
+<wire x1="-3.175" y1="0" x2="-3.175" y2="2.54" width="0.1524" layer="94" curve="180"/>
+<wire x1="-3.175" y1="2.54" x2="-3.175" y2="5.08" width="0.1524" layer="94" curve="180"/>
+<wire x1="-3.175" y1="5.08" x2="-3.175" y2="7.62" width="0.1524" layer="94" curve="180"/>
+<wire x1="-3.175" y1="-2.54" x2="-3.175" y2="0" width="0.1524" layer="94" curve="180"/>
+<wire x1="-3.175" y1="-5.08" x2="-3.175" y2="-2.54" width="0.1524" layer="94" curve="180"/>
+<wire x1="-3.175" y1="-7.62" x2="-3.175" y2="-5.08" width="0.1524" layer="94" curve="180"/>
+<wire x1="-3.175" y1="7.62" x2="-8.89" y2="7.62" width="0.1524" layer="94"/>
+<wire x1="-8.89" y1="-7.62" x2="-3.175" y2="-7.62" width="0.1524" layer="94"/>
+<wire x1="-3.175" y1="0" x2="-8.89" y2="0" width="0.1524" layer="94"/>
<circle x="3.175" y="6.35" radius="0.381" width="0" layer="94"/>
<circle x="3.175" y="-1.27" radius="0.381" width="0" layer="94"/>
-<pin name="P$1" x="-12.7" y="7.62" visible="pad" length="middle"/>
-<pin name="P$2" x="-12.7" y="0" visible="pad" length="middle"/>
-<pin name="P$3" x="-12.7" y="-7.62" visible="pad" length="middle"/>
-<pin name="P$4" x="12.7" y="7.62" visible="pad" length="middle" rot="R180"/>
-<pin name="P$5" x="12.7" y="0" visible="pad" length="middle" rot="R180"/>
-<pin name="P$6" x="12.7" y="-7.62" visible="pad" length="middle" rot="R180"/>
-<text x="0" y="-10.16" size="1.27" layer="94">>NAME</text>
-<text x="0" y="10.16" size="1.27" layer="94">>VALUE</text>
+<circle x="-3.175" y="6.35" radius="0.381" width="0" layer="94"/>
+<circle x="-3.175" y="-1.27" radius="0.381" width="0" layer="94"/>
+<pin name="P$1" x="12.7" y="7.62" visible="pad" length="middle" rot="R180"/>
+<pin name="P$2" x="12.7" y="0" visible="pad" length="middle" rot="R180"/>
+<pin name="P$3" x="12.7" y="-7.62" visible="pad" length="middle" rot="R180"/>
+<pin name="P$4" x="-12.7" y="7.62" visible="pad" length="middle"/>
+<pin name="P$5" x="-12.7" y="0" visible="pad" length="middle"/>
+<pin name="P$6" x="-12.7" y="-7.62" visible="pad" length="middle"/>
+<text x="-2.54" y="10.16" size="1.27" layer="95">>NAME</text>
+<text x="-7.62" y="-10.16" size="1.27" layer="96">>VALUE</text>
</symbol>
<symbol name="OSCILLATOR">
<wire x1="-7.62" y1="5.08" x2="-7.62" y2="-5.08" width="0.254" layer="94"/>
@@ -3963,26 +3963,26 @@
</device>
</devices>
</deviceset>
-<deviceset name="PULSE_T1094NL">
+<deviceset name="PULSE_T1094NL" prefix="TR">
<gates>
-<gate name="1:1" symbol="E1_MAGNETICS" x="0" y="12.7"/>
-<gate name="2:1" symbol="E1_MAGNETICS" x="0" y="-10.16"/>
+<gate name="-1:1" symbol="E1_MAGNETICS" x="0" y="12.7"/>
+<gate name="-1:2" symbol="E1_MAGNETICS" x="0" y="-10.16"/>
</gates>
<devices>
<device name="" package="PULSE_BH">
<connects>
-<connect gate="1:1" pin="P$1" pad="P$1"/>
-<connect gate="1:1" pin="P$2" pad="P$2"/>
-<connect gate="1:1" pin="P$3" pad="P$3"/>
-<connect gate="1:1" pin="P$4" pad="P$16"/>
-<connect gate="1:1" pin="P$5" pad="P$15"/>
-<connect gate="1:1" pin="P$6" pad="P$14"/>
-<connect gate="2:1" pin="P$1" pad="P$6"/>
-<connect gate="2:1" pin="P$2" pad="P$7"/>
-<connect gate="2:1" pin="P$3" pad="P$8"/>
-<connect gate="2:1" pin="P$4" pad="P$11"/>
-<connect gate="2:1" pin="P$5" pad="P$10"/>
-<connect gate="2:1" pin="P$6" pad="P$9"/>
+<connect gate="-1:1" pin="P$1" pad="16"/>
+<connect gate="-1:1" pin="P$2" pad="15"/>
+<connect gate="-1:1" pin="P$3" pad="14"/>
+<connect gate="-1:1" pin="P$4" pad="1"/>
+<connect gate="-1:1" pin="P$5" pad="2"/>
+<connect gate="-1:1" pin="P$6" pad="3"/>
+<connect gate="-1:2" pin="P$1" pad="11"/>
+<connect gate="-1:2" pin="P$2" pad="10"/>
+<connect gate="-1:2" pin="P$3" pad="9"/>
+<connect gate="-1:2" pin="P$4" pad="6"/>
+<connect gate="-1:2" pin="P$5" pad="7"/>
+<connect gate="-1:2" pin="P$6" pad="8"/>
</connects>
<technologies>
<technology name=""/>