| <configuration name="sangoma_codec.conf" description="Sangoma Codec Configuration"> |
| |
| <settings> |
| <!-- |
| Comma separated list of codecs to register with FreeSWITCH, |
| by default (if this parameter is not set) all available codecs are registered. |
| Valid codec values are: PCMU,PCMA,G729,G726-32,G722,GSM,G723,AMR,G7221,iLBC |
| If this parameter is not specified only G729 will be registered |
| <param name="register" value="all"/> |
| --> |
| |
| <!-- |
| List of codecs to not register with FreeSWITCH, by default this is empty, |
| but you may want to not load PCMU and PCMA or may be others to not use your |
| resources in codecs that are done well and fast in software. |
| <param name="noregister" value="PCMU,PCMA"/> |
| --> |
| |
| <!-- |
| Transcoding SOAP server URL. If you are installing the soap server (sngtc_server) |
| in the same box where FreeSWITCH, do not use this value, the default URL |
| that is hard-coded will work out of the box for local installations. |
| If you modify this value, you must configure your SOAP server (/etc/sngtc/sngtc_server.conf.xml) |
| to listen for HTTP requests on the same IP/port that you specify here. |
| <param name="soapserver" value="http://192.168.1.100:8080"/> |
| --> |
| |
| <!-- |
| RTP IP to use |
| By default, this module asks FreeSWITCH for the local ip address. However if you want to use a specific |
| IP address you can set it here. |
| <param name="rtpip" value="192.168.1.1"/> |
| --> |
| </settings> |
| |
| </configuration> |
| |