Gitiles
Code Review Sign In
gerrit.osmocom.org / osmo-ccid-firmware / refs/heads/hoernchen/kevin / . / sysmoOCTSIM / include / instance / sercom6.h
blob: 3f5a6c7377b87ddaa247263b6d45cb848e6f2504 [file] [log] [blame]
Kévin Redon69b92d92019-01-24 16:39:20 +0100[diff] [blame]1/**
2 * \file
3 *
4 * \brief Instance description for SERCOM6
5 *
Harald Welte9bb8bfe2019-05-17 16:10:00 +0200[diff] [blame]6 * Copyright (c) 2019 Microchip Technology Inc.
Kévin Redon69b92d92019-01-24 16:39:20 +0100[diff] [blame]7 *
8 * \asf_license_start
9 *
10 * \page License
11 *
12 * SPDX-License-Identifier: Apache-2.0
13 *
14 * Licensed under the Apache License, Version 2.0 (the "License"); you may
15 * not use this file except in compliance with the License.
16 * You may obtain a copy of the Licence at
17 *
18 * http://www.apache.org/licenses/LICENSE-2.0
19 *
20 * Unless required by applicable law or agreed to in writing, software
21 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
22 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
23 * See the License for the specific language governing permissions and
24 * limitations under the License.
25 *
26 * \asf_license_stop
27 *
28 */
29
30#ifndef _SAME54_SERCOM6_INSTANCE_
31#define _SAME54_SERCOM6_INSTANCE_
32
33/* ========== Register definition for SERCOM6 peripheral ========== */
34#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
35#define REG_SERCOM6_I2CM_CTRLA (0x43000800) /**< \brief (SERCOM6) I2CM Control A */
36#define REG_SERCOM6_I2CM_CTRLB (0x43000804) /**< \brief (SERCOM6) I2CM Control B */
37#define REG_SERCOM6_I2CM_CTRLC (0x43000808) /**< \brief (SERCOM6) I2CM Control C */
38#define REG_SERCOM6_I2CM_BAUD (0x4300080C) /**< \brief (SERCOM6) I2CM Baud Rate */
39#define REG_SERCOM6_I2CM_INTENCLR (0x43000814) /**< \brief (SERCOM6) I2CM Interrupt Enable Clear */
40#define REG_SERCOM6_I2CM_INTENSET (0x43000816) /**< \brief (SERCOM6) I2CM Interrupt Enable Set */
41#define REG_SERCOM6_I2CM_INTFLAG (0x43000818) /**< \brief (SERCOM6) I2CM Interrupt Flag Status and Clear */
42#define REG_SERCOM6_I2CM_STATUS (0x4300081A) /**< \brief (SERCOM6) I2CM Status */
43#define REG_SERCOM6_I2CM_SYNCBUSY (0x4300081C) /**< \brief (SERCOM6) I2CM Synchronization Busy */
44#define REG_SERCOM6_I2CM_ADDR (0x43000824) /**< \brief (SERCOM6) I2CM Address */
45#define REG_SERCOM6_I2CM_DATA (0x43000828) /**< \brief (SERCOM6) I2CM Data */
46#define REG_SERCOM6_I2CM_DBGCTRL (0x43000830) /**< \brief (SERCOM6) I2CM Debug Control */
47#define REG_SERCOM6_I2CS_CTRLA (0x43000800) /**< \brief (SERCOM6) I2CS Control A */
48#define REG_SERCOM6_I2CS_CTRLB (0x43000804) /**< \brief (SERCOM6) I2CS Control B */
49#define REG_SERCOM6_I2CS_CTRLC (0x43000808) /**< \brief (SERCOM6) I2CS Control C */
50#define REG_SERCOM6_I2CS_INTENCLR (0x43000814) /**< \brief (SERCOM6) I2CS Interrupt Enable Clear */
51#define REG_SERCOM6_I2CS_INTENSET (0x43000816) /**< \brief (SERCOM6) I2CS Interrupt Enable Set */
52#define REG_SERCOM6_I2CS_INTFLAG (0x43000818) /**< \brief (SERCOM6) I2CS Interrupt Flag Status and Clear */
53#define REG_SERCOM6_I2CS_STATUS (0x4300081A) /**< \brief (SERCOM6) I2CS Status */
54#define REG_SERCOM6_I2CS_SYNCBUSY (0x4300081C) /**< \brief (SERCOM6) I2CS Synchronization Busy */
55#define REG_SERCOM6_I2CS_LENGTH (0x43000822) /**< \brief (SERCOM6) I2CS Length */
56#define REG_SERCOM6_I2CS_ADDR (0x43000824) /**< \brief (SERCOM6) I2CS Address */
57#define REG_SERCOM6_I2CS_DATA (0x43000828) /**< \brief (SERCOM6) I2CS Data */
58#define REG_SERCOM6_SPI_CTRLA (0x43000800) /**< \brief (SERCOM6) SPI Control A */
59#define REG_SERCOM6_SPI_CTRLB (0x43000804) /**< \brief (SERCOM6) SPI Control B */
60#define REG_SERCOM6_SPI_CTRLC (0x43000808) /**< \brief (SERCOM6) SPI Control C */
61#define REG_SERCOM6_SPI_BAUD (0x4300080C) /**< \brief (SERCOM6) SPI Baud Rate */
62#define REG_SERCOM6_SPI_INTENCLR (0x43000814) /**< \brief (SERCOM6) SPI Interrupt Enable Clear */
63#define REG_SERCOM6_SPI_INTENSET (0x43000816) /**< \brief (SERCOM6) SPI Interrupt Enable Set */
64#define REG_SERCOM6_SPI_INTFLAG (0x43000818) /**< \brief (SERCOM6) SPI Interrupt Flag Status and Clear */
65#define REG_SERCOM6_SPI_STATUS (0x4300081A) /**< \brief (SERCOM6) SPI Status */
66#define REG_SERCOM6_SPI_SYNCBUSY (0x4300081C) /**< \brief (SERCOM6) SPI Synchronization Busy */
67#define REG_SERCOM6_SPI_LENGTH (0x43000822) /**< \brief (SERCOM6) SPI Length */
68#define REG_SERCOM6_SPI_ADDR (0x43000824) /**< \brief (SERCOM6) SPI Address */
69#define REG_SERCOM6_SPI_DATA (0x43000828) /**< \brief (SERCOM6) SPI Data */
70#define REG_SERCOM6_SPI_DBGCTRL (0x43000830) /**< \brief (SERCOM6) SPI Debug Control */
71#define REG_SERCOM6_USART_CTRLA (0x43000800) /**< \brief (SERCOM6) USART Control A */
72#define REG_SERCOM6_USART_CTRLB (0x43000804) /**< \brief (SERCOM6) USART Control B */
73#define REG_SERCOM6_USART_CTRLC (0x43000808) /**< \brief (SERCOM6) USART Control C */
74#define REG_SERCOM6_USART_BAUD (0x4300080C) /**< \brief (SERCOM6) USART Baud Rate */
75#define REG_SERCOM6_USART_RXPL (0x4300080E) /**< \brief (SERCOM6) USART Receive Pulse Length */
76#define REG_SERCOM6_USART_INTENCLR (0x43000814) /**< \brief (SERCOM6) USART Interrupt Enable Clear */
77#define REG_SERCOM6_USART_INTENSET (0x43000816) /**< \brief (SERCOM6) USART Interrupt Enable Set */
78#define REG_SERCOM6_USART_INTFLAG (0x43000818) /**< \brief (SERCOM6) USART Interrupt Flag Status and Clear */
79#define REG_SERCOM6_USART_STATUS (0x4300081A) /**< \brief (SERCOM6) USART Status */
80#define REG_SERCOM6_USART_SYNCBUSY (0x4300081C) /**< \brief (SERCOM6) USART Synchronization Busy */
81#define REG_SERCOM6_USART_RXERRCNT (0x43000820) /**< \brief (SERCOM6) USART Receive Error Count */
82#define REG_SERCOM6_USART_LENGTH (0x43000822) /**< \brief (SERCOM6) USART Length */
83#define REG_SERCOM6_USART_DATA (0x43000828) /**< \brief (SERCOM6) USART Data */
84#define REG_SERCOM6_USART_DBGCTRL (0x43000830) /**< \brief (SERCOM6) USART Debug Control */
85#else
86#define REG_SERCOM6_I2CM_CTRLA (*(RwReg *)0x43000800UL) /**< \brief (SERCOM6) I2CM Control A */
87#define REG_SERCOM6_I2CM_CTRLB (*(RwReg *)0x43000804UL) /**< \brief (SERCOM6) I2CM Control B */
88#define REG_SERCOM6_I2CM_CTRLC (*(RwReg *)0x43000808UL) /**< \brief (SERCOM6) I2CM Control C */
89#define REG_SERCOM6_I2CM_BAUD (*(RwReg *)0x4300080CUL) /**< \brief (SERCOM6) I2CM Baud Rate */
90#define REG_SERCOM6_I2CM_INTENCLR (*(RwReg8 *)0x43000814UL) /**< \brief (SERCOM6) I2CM Interrupt Enable Clear */
91#define REG_SERCOM6_I2CM_INTENSET (*(RwReg8 *)0x43000816UL) /**< \brief (SERCOM6) I2CM Interrupt Enable Set */
92#define REG_SERCOM6_I2CM_INTFLAG (*(RwReg8 *)0x43000818UL) /**< \brief (SERCOM6) I2CM Interrupt Flag Status and Clear */
93#define REG_SERCOM6_I2CM_STATUS (*(RwReg16*)0x4300081AUL) /**< \brief (SERCOM6) I2CM Status */
94#define REG_SERCOM6_I2CM_SYNCBUSY (*(RoReg *)0x4300081CUL) /**< \brief (SERCOM6) I2CM Synchronization Busy */
95#define REG_SERCOM6_I2CM_ADDR (*(RwReg *)0x43000824UL) /**< \brief (SERCOM6) I2CM Address */
96#define REG_SERCOM6_I2CM_DATA (*(RwReg *)0x43000828UL) /**< \brief (SERCOM6) I2CM Data */
97#define REG_SERCOM6_I2CM_DBGCTRL (*(RwReg8 *)0x43000830UL) /**< \brief (SERCOM6) I2CM Debug Control */
98#define REG_SERCOM6_I2CS_CTRLA (*(RwReg *)0x43000800UL) /**< \brief (SERCOM6) I2CS Control A */
99#define REG_SERCOM6_I2CS_CTRLB (*(RwReg *)0x43000804UL) /**< \brief (SERCOM6) I2CS Control B */
100#define REG_SERCOM6_I2CS_CTRLC (*(RwReg *)0x43000808UL) /**< \brief (SERCOM6) I2CS Control C */
101#define REG_SERCOM6_I2CS_INTENCLR (*(RwReg8 *)0x43000814UL) /**< \brief (SERCOM6) I2CS Interrupt Enable Clear */
102#define REG_SERCOM6_I2CS_INTENSET (*(RwReg8 *)0x43000816UL) /**< \brief (SERCOM6) I2CS Interrupt Enable Set */
103#define REG_SERCOM6_I2CS_INTFLAG (*(RwReg8 *)0x43000818UL) /**< \brief (SERCOM6) I2CS Interrupt Flag Status and Clear */
104#define REG_SERCOM6_I2CS_STATUS (*(RwReg16*)0x4300081AUL) /**< \brief (SERCOM6) I2CS Status */
105#define REG_SERCOM6_I2CS_SYNCBUSY (*(RoReg *)0x4300081CUL) /**< \brief (SERCOM6) I2CS Synchronization Busy */
106#define REG_SERCOM6_I2CS_LENGTH (*(RwReg16*)0x43000822UL) /**< \brief (SERCOM6) I2CS Length */
107#define REG_SERCOM6_I2CS_ADDR (*(RwReg *)0x43000824UL) /**< \brief (SERCOM6) I2CS Address */
108#define REG_SERCOM6_I2CS_DATA (*(RwReg *)0x43000828UL) /**< \brief (SERCOM6) I2CS Data */
109#define REG_SERCOM6_SPI_CTRLA (*(RwReg *)0x43000800UL) /**< \brief (SERCOM6) SPI Control A */
110#define REG_SERCOM6_SPI_CTRLB (*(RwReg *)0x43000804UL) /**< \brief (SERCOM6) SPI Control B */
111#define REG_SERCOM6_SPI_CTRLC (*(RwReg *)0x43000808UL) /**< \brief (SERCOM6) SPI Control C */
112#define REG_SERCOM6_SPI_BAUD (*(RwReg8 *)0x4300080CUL) /**< \brief (SERCOM6) SPI Baud Rate */
113#define REG_SERCOM6_SPI_INTENCLR (*(RwReg8 *)0x43000814UL) /**< \brief (SERCOM6) SPI Interrupt Enable Clear */
114#define REG_SERCOM6_SPI_INTENSET (*(RwReg8 *)0x43000816UL) /**< \brief (SERCOM6) SPI Interrupt Enable Set */
115#define REG_SERCOM6_SPI_INTFLAG (*(RwReg8 *)0x43000818UL) /**< \brief (SERCOM6) SPI Interrupt Flag Status and Clear */
116#define REG_SERCOM6_SPI_STATUS (*(RwReg16*)0x4300081AUL) /**< \brief (SERCOM6) SPI Status */
117#define REG_SERCOM6_SPI_SYNCBUSY (*(RoReg *)0x4300081CUL) /**< \brief (SERCOM6) SPI Synchronization Busy */
118#define REG_SERCOM6_SPI_LENGTH (*(RwReg16*)0x43000822UL) /**< \brief (SERCOM6) SPI Length */
119#define REG_SERCOM6_SPI_ADDR (*(RwReg *)0x43000824UL) /**< \brief (SERCOM6) SPI Address */
120#define REG_SERCOM6_SPI_DATA (*(RwReg *)0x43000828UL) /**< \brief (SERCOM6) SPI Data */
121#define REG_SERCOM6_SPI_DBGCTRL (*(RwReg8 *)0x43000830UL) /**< \brief (SERCOM6) SPI Debug Control */
122#define REG_SERCOM6_USART_CTRLA (*(RwReg *)0x43000800UL) /**< \brief (SERCOM6) USART Control A */
123#define REG_SERCOM6_USART_CTRLB (*(RwReg *)0x43000804UL) /**< \brief (SERCOM6) USART Control B */
124#define REG_SERCOM6_USART_CTRLC (*(RwReg *)0x43000808UL) /**< \brief (SERCOM6) USART Control C */
125#define REG_SERCOM6_USART_BAUD (*(RwReg16*)0x4300080CUL) /**< \brief (SERCOM6) USART Baud Rate */
126#define REG_SERCOM6_USART_RXPL (*(RwReg8 *)0x4300080EUL) /**< \brief (SERCOM6) USART Receive Pulse Length */
127#define REG_SERCOM6_USART_INTENCLR (*(RwReg8 *)0x43000814UL) /**< \brief (SERCOM6) USART Interrupt Enable Clear */
128#define REG_SERCOM6_USART_INTENSET (*(RwReg8 *)0x43000816UL) /**< \brief (SERCOM6) USART Interrupt Enable Set */
129#define REG_SERCOM6_USART_INTFLAG (*(RwReg8 *)0x43000818UL) /**< \brief (SERCOM6) USART Interrupt Flag Status and Clear */
130#define REG_SERCOM6_USART_STATUS (*(RwReg16*)0x4300081AUL) /**< \brief (SERCOM6) USART Status */
131#define REG_SERCOM6_USART_SYNCBUSY (*(RoReg *)0x4300081CUL) /**< \brief (SERCOM6) USART Synchronization Busy */
132#define REG_SERCOM6_USART_RXERRCNT (*(RoReg8 *)0x43000820UL) /**< \brief (SERCOM6) USART Receive Error Count */
133#define REG_SERCOM6_USART_LENGTH (*(RwReg16*)0x43000822UL) /**< \brief (SERCOM6) USART Length */
134#define REG_SERCOM6_USART_DATA (*(RwReg *)0x43000828UL) /**< \brief (SERCOM6) USART Data */
135#define REG_SERCOM6_USART_DBGCTRL (*(RwReg8 *)0x43000830UL) /**< \brief (SERCOM6) USART Debug Control */
136#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
137
138/* ========== Instance parameters for SERCOM6 peripheral ========== */
139#define SERCOM6_CLK_REDUCTION 1 // Reduce clock options to pin 1 for SPI and USART
140#define SERCOM6_DLY_COMPENSATION 1 // Compensates for a fast DLY50 element. Assuming 20ns
141#define SERCOM6_DMA 1 // DMA support implemented?
142#define SERCOM6_DMAC_ID_RX 16 // Index of DMA RX trigger
143#define SERCOM6_DMAC_ID_TX 17 // Index of DMA TX trigger
144#define SERCOM6_FIFO_DEPTH_POWER 1 // 2^FIFO_DEPTH_POWER gives rx FIFO depth.
145#define SERCOM6_GCLK_ID_CORE 36
146#define SERCOM6_GCLK_ID_SLOW 3
147#define SERCOM6_INT_MSB 6
Harald Welte9bb8bfe2019-05-17 16:10:00 +0200[diff] [blame]148#define SERCOM6_I2CM 1 // I2C Master mode implemented?
149#define SERCOM6_I2CS 1 // I2C Slave mode implemented?
150#define SERCOM6_I2CS_AUTO_ACK 1 // I2C slave automatic acknowledge implemented?
151#define SERCOM6_I2CS_GROUP_CMD 1 // I2C slave group command implemented?
152#define SERCOM6_I2CS_SDASETUP_CNT_SIZE 8 // I2CS sda setup count size
153#define SERCOM6_I2CS_SDASETUP_SIZE 4 // I2CS sda setup size
154#define SERCOM6_I2CS_SUDAT 1 // I2C slave SDA setup implemented?
155#define SERCOM6_I2C_FASTMP 1 // I2C fast mode plus implemented?
156#define SERCOM6_I2C_HSMODE 1 // USART mode implemented?
157#define SERCOM6_I2C_SCLSM_MODE 1 // I2C SCL clock stretch mode implemented?
158#define SERCOM6_I2C_SMB_TIMEOUTS 1 // I2C SMBus timeouts implemented?
159#define SERCOM6_I2C_TENBIT_ADR 1 // I2C ten bit enabled?
Kévin Redon69b92d92019-01-24 16:39:20 +0100[diff] [blame]160#define SERCOM6_PMSB 3
161#define SERCOM6_RETENTION_SUPPORT 0 // Retention supported?
162#define SERCOM6_SE_CNT 1 // SE counter included?
163#define SERCOM6_SPI 1 // SPI mode implemented?
164#define SERCOM6_SPI_HW_SS_CTRL 1 // Master _SS hardware control implemented?
165#define SERCOM6_SPI_ICSPACE_EXT 1 // SPI inter character space implemented?
166#define SERCOM6_SPI_OZMO 0 // OZMO features implemented?
167#define SERCOM6_SPI_WAKE_ON_SSL 1 // _SS low detect implemented?
168#define SERCOM6_TTBIT_EXTENSION 1 // 32-bit extension implemented?
Kévin Redon69b92d92019-01-24 16:39:20 +0100[diff] [blame]169#define SERCOM6_USART 1 // USART mode implemented?
170#define SERCOM6_USART_AUTOBAUD 1 // USART autobaud implemented?
171#define SERCOM6_USART_COLDET 1 // USART collision detection implemented?
172#define SERCOM6_USART_FLOW_CTRL 1 // USART flow control implemented?
173#define SERCOM6_USART_FRAC_BAUD 1 // USART fractional BAUD implemented?
174#define SERCOM6_USART_IRDA 1 // USART IrDA implemented?
175#define SERCOM6_USART_ISO7816 1 // USART ISO7816 mode implemented?
176#define SERCOM6_USART_LIN_MASTER 1 // USART LIN Master mode implemented?
177#define SERCOM6_USART_RS485 1 // USART RS485 mode implemented?
178#define SERCOM6_USART_SAMPA_EXT 1 // USART sample adjust implemented?
179#define SERCOM6_USART_SAMPR_EXT 1 // USART oversampling adjustment implemented?
180
181#endif /* _SAME54_SERCOM6_INSTANCE_ */