Kévin Redon | 69b92d9 | 2019-01-24 16:39:20 +0100 | [diff] [blame] | 1 | /** |
| 2 | * \file |
| 3 | * |
| 4 | * \brief Instance description for SERCOM2 |
| 5 | * |
| 6 | * Copyright (c) 2018 Microchip Technology Inc. |
| 7 | * |
| 8 | * \asf_license_start |
| 9 | * |
| 10 | * \page License |
| 11 | * |
| 12 | * SPDX-License-Identifier: Apache-2.0 |
| 13 | * |
| 14 | * Licensed under the Apache License, Version 2.0 (the "License"); you may |
| 15 | * not use this file except in compliance with the License. |
| 16 | * You may obtain a copy of the Licence at |
| 17 | * |
| 18 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 19 | * |
| 20 | * Unless required by applicable law or agreed to in writing, software |
| 21 | * distributed under the License is distributed on an AS IS BASIS, WITHOUT |
| 22 | * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 23 | * See the License for the specific language governing permissions and |
| 24 | * limitations under the License. |
| 25 | * |
| 26 | * \asf_license_stop |
| 27 | * |
| 28 | */ |
| 29 | |
| 30 | #ifndef _SAME54_SERCOM2_INSTANCE_ |
| 31 | #define _SAME54_SERCOM2_INSTANCE_ |
| 32 | |
| 33 | /* ========== Register definition for SERCOM2 peripheral ========== */ |
| 34 | #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) |
| 35 | #define REG_SERCOM2_I2CM_CTRLA (0x41012000) /**< \brief (SERCOM2) I2CM Control A */ |
| 36 | #define REG_SERCOM2_I2CM_CTRLB (0x41012004) /**< \brief (SERCOM2) I2CM Control B */ |
| 37 | #define REG_SERCOM2_I2CM_CTRLC (0x41012008) /**< \brief (SERCOM2) I2CM Control C */ |
| 38 | #define REG_SERCOM2_I2CM_BAUD (0x4101200C) /**< \brief (SERCOM2) I2CM Baud Rate */ |
| 39 | #define REG_SERCOM2_I2CM_INTENCLR (0x41012014) /**< \brief (SERCOM2) I2CM Interrupt Enable Clear */ |
| 40 | #define REG_SERCOM2_I2CM_INTENSET (0x41012016) /**< \brief (SERCOM2) I2CM Interrupt Enable Set */ |
| 41 | #define REG_SERCOM2_I2CM_INTFLAG (0x41012018) /**< \brief (SERCOM2) I2CM Interrupt Flag Status and Clear */ |
| 42 | #define REG_SERCOM2_I2CM_STATUS (0x4101201A) /**< \brief (SERCOM2) I2CM Status */ |
| 43 | #define REG_SERCOM2_I2CM_SYNCBUSY (0x4101201C) /**< \brief (SERCOM2) I2CM Synchronization Busy */ |
| 44 | #define REG_SERCOM2_I2CM_ADDR (0x41012024) /**< \brief (SERCOM2) I2CM Address */ |
| 45 | #define REG_SERCOM2_I2CM_DATA (0x41012028) /**< \brief (SERCOM2) I2CM Data */ |
| 46 | #define REG_SERCOM2_I2CM_DBGCTRL (0x41012030) /**< \brief (SERCOM2) I2CM Debug Control */ |
| 47 | #define REG_SERCOM2_I2CS_CTRLA (0x41012000) /**< \brief (SERCOM2) I2CS Control A */ |
| 48 | #define REG_SERCOM2_I2CS_CTRLB (0x41012004) /**< \brief (SERCOM2) I2CS Control B */ |
| 49 | #define REG_SERCOM2_I2CS_CTRLC (0x41012008) /**< \brief (SERCOM2) I2CS Control C */ |
| 50 | #define REG_SERCOM2_I2CS_INTENCLR (0x41012014) /**< \brief (SERCOM2) I2CS Interrupt Enable Clear */ |
| 51 | #define REG_SERCOM2_I2CS_INTENSET (0x41012016) /**< \brief (SERCOM2) I2CS Interrupt Enable Set */ |
| 52 | #define REG_SERCOM2_I2CS_INTFLAG (0x41012018) /**< \brief (SERCOM2) I2CS Interrupt Flag Status and Clear */ |
| 53 | #define REG_SERCOM2_I2CS_STATUS (0x4101201A) /**< \brief (SERCOM2) I2CS Status */ |
| 54 | #define REG_SERCOM2_I2CS_SYNCBUSY (0x4101201C) /**< \brief (SERCOM2) I2CS Synchronization Busy */ |
| 55 | #define REG_SERCOM2_I2CS_LENGTH (0x41012022) /**< \brief (SERCOM2) I2CS Length */ |
| 56 | #define REG_SERCOM2_I2CS_ADDR (0x41012024) /**< \brief (SERCOM2) I2CS Address */ |
| 57 | #define REG_SERCOM2_I2CS_DATA (0x41012028) /**< \brief (SERCOM2) I2CS Data */ |
| 58 | #define REG_SERCOM2_SPI_CTRLA (0x41012000) /**< \brief (SERCOM2) SPI Control A */ |
| 59 | #define REG_SERCOM2_SPI_CTRLB (0x41012004) /**< \brief (SERCOM2) SPI Control B */ |
| 60 | #define REG_SERCOM2_SPI_CTRLC (0x41012008) /**< \brief (SERCOM2) SPI Control C */ |
| 61 | #define REG_SERCOM2_SPI_BAUD (0x4101200C) /**< \brief (SERCOM2) SPI Baud Rate */ |
| 62 | #define REG_SERCOM2_SPI_INTENCLR (0x41012014) /**< \brief (SERCOM2) SPI Interrupt Enable Clear */ |
| 63 | #define REG_SERCOM2_SPI_INTENSET (0x41012016) /**< \brief (SERCOM2) SPI Interrupt Enable Set */ |
| 64 | #define REG_SERCOM2_SPI_INTFLAG (0x41012018) /**< \brief (SERCOM2) SPI Interrupt Flag Status and Clear */ |
| 65 | #define REG_SERCOM2_SPI_STATUS (0x4101201A) /**< \brief (SERCOM2) SPI Status */ |
| 66 | #define REG_SERCOM2_SPI_SYNCBUSY (0x4101201C) /**< \brief (SERCOM2) SPI Synchronization Busy */ |
| 67 | #define REG_SERCOM2_SPI_LENGTH (0x41012022) /**< \brief (SERCOM2) SPI Length */ |
| 68 | #define REG_SERCOM2_SPI_ADDR (0x41012024) /**< \brief (SERCOM2) SPI Address */ |
| 69 | #define REG_SERCOM2_SPI_DATA (0x41012028) /**< \brief (SERCOM2) SPI Data */ |
| 70 | #define REG_SERCOM2_SPI_DBGCTRL (0x41012030) /**< \brief (SERCOM2) SPI Debug Control */ |
| 71 | #define REG_SERCOM2_USART_CTRLA (0x41012000) /**< \brief (SERCOM2) USART Control A */ |
| 72 | #define REG_SERCOM2_USART_CTRLB (0x41012004) /**< \brief (SERCOM2) USART Control B */ |
| 73 | #define REG_SERCOM2_USART_CTRLC (0x41012008) /**< \brief (SERCOM2) USART Control C */ |
| 74 | #define REG_SERCOM2_USART_BAUD (0x4101200C) /**< \brief (SERCOM2) USART Baud Rate */ |
| 75 | #define REG_SERCOM2_USART_RXPL (0x4101200E) /**< \brief (SERCOM2) USART Receive Pulse Length */ |
| 76 | #define REG_SERCOM2_USART_INTENCLR (0x41012014) /**< \brief (SERCOM2) USART Interrupt Enable Clear */ |
| 77 | #define REG_SERCOM2_USART_INTENSET (0x41012016) /**< \brief (SERCOM2) USART Interrupt Enable Set */ |
| 78 | #define REG_SERCOM2_USART_INTFLAG (0x41012018) /**< \brief (SERCOM2) USART Interrupt Flag Status and Clear */ |
| 79 | #define REG_SERCOM2_USART_STATUS (0x4101201A) /**< \brief (SERCOM2) USART Status */ |
| 80 | #define REG_SERCOM2_USART_SYNCBUSY (0x4101201C) /**< \brief (SERCOM2) USART Synchronization Busy */ |
| 81 | #define REG_SERCOM2_USART_RXERRCNT (0x41012020) /**< \brief (SERCOM2) USART Receive Error Count */ |
| 82 | #define REG_SERCOM2_USART_LENGTH (0x41012022) /**< \brief (SERCOM2) USART Length */ |
| 83 | #define REG_SERCOM2_USART_DATA (0x41012028) /**< \brief (SERCOM2) USART Data */ |
| 84 | #define REG_SERCOM2_USART_DBGCTRL (0x41012030) /**< \brief (SERCOM2) USART Debug Control */ |
| 85 | #else |
| 86 | #define REG_SERCOM2_I2CM_CTRLA (*(RwReg *)0x41012000UL) /**< \brief (SERCOM2) I2CM Control A */ |
| 87 | #define REG_SERCOM2_I2CM_CTRLB (*(RwReg *)0x41012004UL) /**< \brief (SERCOM2) I2CM Control B */ |
| 88 | #define REG_SERCOM2_I2CM_CTRLC (*(RwReg *)0x41012008UL) /**< \brief (SERCOM2) I2CM Control C */ |
| 89 | #define REG_SERCOM2_I2CM_BAUD (*(RwReg *)0x4101200CUL) /**< \brief (SERCOM2) I2CM Baud Rate */ |
| 90 | #define REG_SERCOM2_I2CM_INTENCLR (*(RwReg8 *)0x41012014UL) /**< \brief (SERCOM2) I2CM Interrupt Enable Clear */ |
| 91 | #define REG_SERCOM2_I2CM_INTENSET (*(RwReg8 *)0x41012016UL) /**< \brief (SERCOM2) I2CM Interrupt Enable Set */ |
| 92 | #define REG_SERCOM2_I2CM_INTFLAG (*(RwReg8 *)0x41012018UL) /**< \brief (SERCOM2) I2CM Interrupt Flag Status and Clear */ |
| 93 | #define REG_SERCOM2_I2CM_STATUS (*(RwReg16*)0x4101201AUL) /**< \brief (SERCOM2) I2CM Status */ |
| 94 | #define REG_SERCOM2_I2CM_SYNCBUSY (*(RoReg *)0x4101201CUL) /**< \brief (SERCOM2) I2CM Synchronization Busy */ |
| 95 | #define REG_SERCOM2_I2CM_ADDR (*(RwReg *)0x41012024UL) /**< \brief (SERCOM2) I2CM Address */ |
| 96 | #define REG_SERCOM2_I2CM_DATA (*(RwReg *)0x41012028UL) /**< \brief (SERCOM2) I2CM Data */ |
| 97 | #define REG_SERCOM2_I2CM_DBGCTRL (*(RwReg8 *)0x41012030UL) /**< \brief (SERCOM2) I2CM Debug Control */ |
| 98 | #define REG_SERCOM2_I2CS_CTRLA (*(RwReg *)0x41012000UL) /**< \brief (SERCOM2) I2CS Control A */ |
| 99 | #define REG_SERCOM2_I2CS_CTRLB (*(RwReg *)0x41012004UL) /**< \brief (SERCOM2) I2CS Control B */ |
| 100 | #define REG_SERCOM2_I2CS_CTRLC (*(RwReg *)0x41012008UL) /**< \brief (SERCOM2) I2CS Control C */ |
| 101 | #define REG_SERCOM2_I2CS_INTENCLR (*(RwReg8 *)0x41012014UL) /**< \brief (SERCOM2) I2CS Interrupt Enable Clear */ |
| 102 | #define REG_SERCOM2_I2CS_INTENSET (*(RwReg8 *)0x41012016UL) /**< \brief (SERCOM2) I2CS Interrupt Enable Set */ |
| 103 | #define REG_SERCOM2_I2CS_INTFLAG (*(RwReg8 *)0x41012018UL) /**< \brief (SERCOM2) I2CS Interrupt Flag Status and Clear */ |
| 104 | #define REG_SERCOM2_I2CS_STATUS (*(RwReg16*)0x4101201AUL) /**< \brief (SERCOM2) I2CS Status */ |
| 105 | #define REG_SERCOM2_I2CS_SYNCBUSY (*(RoReg *)0x4101201CUL) /**< \brief (SERCOM2) I2CS Synchronization Busy */ |
| 106 | #define REG_SERCOM2_I2CS_LENGTH (*(RwReg16*)0x41012022UL) /**< \brief (SERCOM2) I2CS Length */ |
| 107 | #define REG_SERCOM2_I2CS_ADDR (*(RwReg *)0x41012024UL) /**< \brief (SERCOM2) I2CS Address */ |
| 108 | #define REG_SERCOM2_I2CS_DATA (*(RwReg *)0x41012028UL) /**< \brief (SERCOM2) I2CS Data */ |
| 109 | #define REG_SERCOM2_SPI_CTRLA (*(RwReg *)0x41012000UL) /**< \brief (SERCOM2) SPI Control A */ |
| 110 | #define REG_SERCOM2_SPI_CTRLB (*(RwReg *)0x41012004UL) /**< \brief (SERCOM2) SPI Control B */ |
| 111 | #define REG_SERCOM2_SPI_CTRLC (*(RwReg *)0x41012008UL) /**< \brief (SERCOM2) SPI Control C */ |
| 112 | #define REG_SERCOM2_SPI_BAUD (*(RwReg8 *)0x4101200CUL) /**< \brief (SERCOM2) SPI Baud Rate */ |
| 113 | #define REG_SERCOM2_SPI_INTENCLR (*(RwReg8 *)0x41012014UL) /**< \brief (SERCOM2) SPI Interrupt Enable Clear */ |
| 114 | #define REG_SERCOM2_SPI_INTENSET (*(RwReg8 *)0x41012016UL) /**< \brief (SERCOM2) SPI Interrupt Enable Set */ |
| 115 | #define REG_SERCOM2_SPI_INTFLAG (*(RwReg8 *)0x41012018UL) /**< \brief (SERCOM2) SPI Interrupt Flag Status and Clear */ |
| 116 | #define REG_SERCOM2_SPI_STATUS (*(RwReg16*)0x4101201AUL) /**< \brief (SERCOM2) SPI Status */ |
| 117 | #define REG_SERCOM2_SPI_SYNCBUSY (*(RoReg *)0x4101201CUL) /**< \brief (SERCOM2) SPI Synchronization Busy */ |
| 118 | #define REG_SERCOM2_SPI_LENGTH (*(RwReg16*)0x41012022UL) /**< \brief (SERCOM2) SPI Length */ |
| 119 | #define REG_SERCOM2_SPI_ADDR (*(RwReg *)0x41012024UL) /**< \brief (SERCOM2) SPI Address */ |
| 120 | #define REG_SERCOM2_SPI_DATA (*(RwReg *)0x41012028UL) /**< \brief (SERCOM2) SPI Data */ |
| 121 | #define REG_SERCOM2_SPI_DBGCTRL (*(RwReg8 *)0x41012030UL) /**< \brief (SERCOM2) SPI Debug Control */ |
| 122 | #define REG_SERCOM2_USART_CTRLA (*(RwReg *)0x41012000UL) /**< \brief (SERCOM2) USART Control A */ |
| 123 | #define REG_SERCOM2_USART_CTRLB (*(RwReg *)0x41012004UL) /**< \brief (SERCOM2) USART Control B */ |
| 124 | #define REG_SERCOM2_USART_CTRLC (*(RwReg *)0x41012008UL) /**< \brief (SERCOM2) USART Control C */ |
| 125 | #define REG_SERCOM2_USART_BAUD (*(RwReg16*)0x4101200CUL) /**< \brief (SERCOM2) USART Baud Rate */ |
| 126 | #define REG_SERCOM2_USART_RXPL (*(RwReg8 *)0x4101200EUL) /**< \brief (SERCOM2) USART Receive Pulse Length */ |
| 127 | #define REG_SERCOM2_USART_INTENCLR (*(RwReg8 *)0x41012014UL) /**< \brief (SERCOM2) USART Interrupt Enable Clear */ |
| 128 | #define REG_SERCOM2_USART_INTENSET (*(RwReg8 *)0x41012016UL) /**< \brief (SERCOM2) USART Interrupt Enable Set */ |
| 129 | #define REG_SERCOM2_USART_INTFLAG (*(RwReg8 *)0x41012018UL) /**< \brief (SERCOM2) USART Interrupt Flag Status and Clear */ |
| 130 | #define REG_SERCOM2_USART_STATUS (*(RwReg16*)0x4101201AUL) /**< \brief (SERCOM2) USART Status */ |
| 131 | #define REG_SERCOM2_USART_SYNCBUSY (*(RoReg *)0x4101201CUL) /**< \brief (SERCOM2) USART Synchronization Busy */ |
| 132 | #define REG_SERCOM2_USART_RXERRCNT (*(RoReg8 *)0x41012020UL) /**< \brief (SERCOM2) USART Receive Error Count */ |
| 133 | #define REG_SERCOM2_USART_LENGTH (*(RwReg16*)0x41012022UL) /**< \brief (SERCOM2) USART Length */ |
| 134 | #define REG_SERCOM2_USART_DATA (*(RwReg *)0x41012028UL) /**< \brief (SERCOM2) USART Data */ |
| 135 | #define REG_SERCOM2_USART_DBGCTRL (*(RwReg8 *)0x41012030UL) /**< \brief (SERCOM2) USART Debug Control */ |
| 136 | #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ |
| 137 | |
| 138 | /* ========== Instance parameters for SERCOM2 peripheral ========== */ |
| 139 | #define SERCOM2_CLK_REDUCTION 1 // Reduce clock options to pin 1 for SPI and USART |
| 140 | #define SERCOM2_DLY_COMPENSATION 1 // Compensates for a fast DLY50 element. Assuming 20ns |
| 141 | #define SERCOM2_DMA 1 // DMA support implemented? |
| 142 | #define SERCOM2_DMAC_ID_RX 8 // Index of DMA RX trigger |
| 143 | #define SERCOM2_DMAC_ID_TX 9 // Index of DMA TX trigger |
| 144 | #define SERCOM2_FIFO_DEPTH_POWER 1 // 2^FIFO_DEPTH_POWER gives rx FIFO depth. |
| 145 | #define SERCOM2_GCLK_ID_CORE 23 |
| 146 | #define SERCOM2_GCLK_ID_SLOW 3 |
| 147 | #define SERCOM2_INT_MSB 6 |
| 148 | #define SERCOM2_PMSB 3 |
| 149 | #define SERCOM2_RETENTION_SUPPORT 0 // Retention supported? |
| 150 | #define SERCOM2_SE_CNT 1 // SE counter included? |
| 151 | #define SERCOM2_SPI 1 // SPI mode implemented? |
| 152 | #define SERCOM2_SPI_HW_SS_CTRL 1 // Master _SS hardware control implemented? |
| 153 | #define SERCOM2_SPI_ICSPACE_EXT 1 // SPI inter character space implemented? |
| 154 | #define SERCOM2_SPI_OZMO 0 // OZMO features implemented? |
| 155 | #define SERCOM2_SPI_WAKE_ON_SSL 1 // _SS low detect implemented? |
| 156 | #define SERCOM2_TTBIT_EXTENSION 1 // 32-bit extension implemented? |
| 157 | #define SERCOM2_TWIM 1 // TWI Master mode implemented? |
| 158 | #define SERCOM2_TWIS 1 // TWI Slave mode implemented? |
| 159 | #define SERCOM2_TWIS_AUTO_ACK 1 // TWI slave automatic acknowledge implemented? |
| 160 | #define SERCOM2_TWIS_GROUP_CMD 1 // TWI slave group command implemented? |
| 161 | #define SERCOM2_TWIS_SDASETUP_CNT_SIZE 8 // TWIS sda setup count size |
| 162 | #define SERCOM2_TWIS_SDASETUP_SIZE 4 // TWIS sda setup size |
| 163 | #define SERCOM2_TWIS_SUDAT 1 // TWI slave SDA setup implemented? |
| 164 | #define SERCOM2_TWI_FASTMP 1 // TWI fast mode plus implemented? |
| 165 | #define SERCOM2_TWI_HSMODE 1 // USART mode implemented? |
| 166 | #define SERCOM2_TWI_SCLSM_MODE 1 // TWI SCL clock stretch mode implemented? |
| 167 | #define SERCOM2_TWI_SMB_TIMEOUTS 1 // TWI SMBus timeouts implemented? |
| 168 | #define SERCOM2_TWI_TENBIT_ADR 1 // TWI ten bit enabled? |
| 169 | #define SERCOM2_USART 1 // USART mode implemented? |
| 170 | #define SERCOM2_USART_AUTOBAUD 1 // USART autobaud implemented? |
| 171 | #define SERCOM2_USART_COLDET 1 // USART collision detection implemented? |
| 172 | #define SERCOM2_USART_FLOW_CTRL 1 // USART flow control implemented? |
| 173 | #define SERCOM2_USART_FRAC_BAUD 1 // USART fractional BAUD implemented? |
| 174 | #define SERCOM2_USART_IRDA 1 // USART IrDA implemented? |
| 175 | #define SERCOM2_USART_ISO7816 1 // USART ISO7816 mode implemented? |
| 176 | #define SERCOM2_USART_LIN_MASTER 1 // USART LIN Master mode implemented? |
| 177 | #define SERCOM2_USART_RS485 1 // USART RS485 mode implemented? |
| 178 | #define SERCOM2_USART_SAMPA_EXT 1 // USART sample adjust implemented? |
| 179 | #define SERCOM2_USART_SAMPR_EXT 1 // USART oversampling adjustment implemented? |
| 180 | |
| 181 | #endif /* _SAME54_SERCOM2_INSTANCE_ */ |