Gitiles
Code Review Sign In
gerrit.osmocom.org / osmo-ccid-firmware / 18c2dbbb15a1a66bbf009ea57d5b281e24468645 / . / sysmoOCTSIM / include / instance / sercom7.h
blob: 5bf5ae4ff3c3c835f04e2c4bf847ad9c27060aaf [file] [log] [blame]
Kévin Redon69b92d92019-01-24 16:39:20 +0100[diff] [blame]1/**
2 * \file
3 *
4 * \brief Instance description for SERCOM7
5 *
6 * Copyright (c) 2018 Microchip Technology Inc.
7 *
8 * \asf_license_start
9 *
10 * \page License
11 *
12 * SPDX-License-Identifier: Apache-2.0
13 *
14 * Licensed under the Apache License, Version 2.0 (the "License"); you may
15 * not use this file except in compliance with the License.
16 * You may obtain a copy of the Licence at
17 *
18 * http://www.apache.org/licenses/LICENSE-2.0
19 *
20 * Unless required by applicable law or agreed to in writing, software
21 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
22 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
23 * See the License for the specific language governing permissions and
24 * limitations under the License.
25 *
26 * \asf_license_stop
27 *
28 */
29
30#ifndef _SAME54_SERCOM7_INSTANCE_
31#define _SAME54_SERCOM7_INSTANCE_
32
33/* ========== Register definition for SERCOM7 peripheral ========== */
34#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
35#define REG_SERCOM7_I2CM_CTRLA (0x43000C00) /**< \brief (SERCOM7) I2CM Control A */
36#define REG_SERCOM7_I2CM_CTRLB (0x43000C04) /**< \brief (SERCOM7) I2CM Control B */
37#define REG_SERCOM7_I2CM_CTRLC (0x43000C08) /**< \brief (SERCOM7) I2CM Control C */
38#define REG_SERCOM7_I2CM_BAUD (0x43000C0C) /**< \brief (SERCOM7) I2CM Baud Rate */
39#define REG_SERCOM7_I2CM_INTENCLR (0x43000C14) /**< \brief (SERCOM7) I2CM Interrupt Enable Clear */
40#define REG_SERCOM7_I2CM_INTENSET (0x43000C16) /**< \brief (SERCOM7) I2CM Interrupt Enable Set */
41#define REG_SERCOM7_I2CM_INTFLAG (0x43000C18) /**< \brief (SERCOM7) I2CM Interrupt Flag Status and Clear */
42#define REG_SERCOM7_I2CM_STATUS (0x43000C1A) /**< \brief (SERCOM7) I2CM Status */
43#define REG_SERCOM7_I2CM_SYNCBUSY (0x43000C1C) /**< \brief (SERCOM7) I2CM Synchronization Busy */
44#define REG_SERCOM7_I2CM_ADDR (0x43000C24) /**< \brief (SERCOM7) I2CM Address */
45#define REG_SERCOM7_I2CM_DATA (0x43000C28) /**< \brief (SERCOM7) I2CM Data */
46#define REG_SERCOM7_I2CM_DBGCTRL (0x43000C30) /**< \brief (SERCOM7) I2CM Debug Control */
47#define REG_SERCOM7_I2CS_CTRLA (0x43000C00) /**< \brief (SERCOM7) I2CS Control A */
48#define REG_SERCOM7_I2CS_CTRLB (0x43000C04) /**< \brief (SERCOM7) I2CS Control B */
49#define REG_SERCOM7_I2CS_CTRLC (0x43000C08) /**< \brief (SERCOM7) I2CS Control C */
50#define REG_SERCOM7_I2CS_INTENCLR (0x43000C14) /**< \brief (SERCOM7) I2CS Interrupt Enable Clear */
51#define REG_SERCOM7_I2CS_INTENSET (0x43000C16) /**< \brief (SERCOM7) I2CS Interrupt Enable Set */
52#define REG_SERCOM7_I2CS_INTFLAG (0x43000C18) /**< \brief (SERCOM7) I2CS Interrupt Flag Status and Clear */
53#define REG_SERCOM7_I2CS_STATUS (0x43000C1A) /**< \brief (SERCOM7) I2CS Status */
54#define REG_SERCOM7_I2CS_SYNCBUSY (0x43000C1C) /**< \brief (SERCOM7) I2CS Synchronization Busy */
55#define REG_SERCOM7_I2CS_LENGTH (0x43000C22) /**< \brief (SERCOM7) I2CS Length */
56#define REG_SERCOM7_I2CS_ADDR (0x43000C24) /**< \brief (SERCOM7) I2CS Address */
57#define REG_SERCOM7_I2CS_DATA (0x43000C28) /**< \brief (SERCOM7) I2CS Data */
58#define REG_SERCOM7_SPI_CTRLA (0x43000C00) /**< \brief (SERCOM7) SPI Control A */
59#define REG_SERCOM7_SPI_CTRLB (0x43000C04) /**< \brief (SERCOM7) SPI Control B */
60#define REG_SERCOM7_SPI_CTRLC (0x43000C08) /**< \brief (SERCOM7) SPI Control C */
61#define REG_SERCOM7_SPI_BAUD (0x43000C0C) /**< \brief (SERCOM7) SPI Baud Rate */
62#define REG_SERCOM7_SPI_INTENCLR (0x43000C14) /**< \brief (SERCOM7) SPI Interrupt Enable Clear */
63#define REG_SERCOM7_SPI_INTENSET (0x43000C16) /**< \brief (SERCOM7) SPI Interrupt Enable Set */
64#define REG_SERCOM7_SPI_INTFLAG (0x43000C18) /**< \brief (SERCOM7) SPI Interrupt Flag Status and Clear */
65#define REG_SERCOM7_SPI_STATUS (0x43000C1A) /**< \brief (SERCOM7) SPI Status */
66#define REG_SERCOM7_SPI_SYNCBUSY (0x43000C1C) /**< \brief (SERCOM7) SPI Synchronization Busy */
67#define REG_SERCOM7_SPI_LENGTH (0x43000C22) /**< \brief (SERCOM7) SPI Length */
68#define REG_SERCOM7_SPI_ADDR (0x43000C24) /**< \brief (SERCOM7) SPI Address */
69#define REG_SERCOM7_SPI_DATA (0x43000C28) /**< \brief (SERCOM7) SPI Data */
70#define REG_SERCOM7_SPI_DBGCTRL (0x43000C30) /**< \brief (SERCOM7) SPI Debug Control */
71#define REG_SERCOM7_USART_CTRLA (0x43000C00) /**< \brief (SERCOM7) USART Control A */
72#define REG_SERCOM7_USART_CTRLB (0x43000C04) /**< \brief (SERCOM7) USART Control B */
73#define REG_SERCOM7_USART_CTRLC (0x43000C08) /**< \brief (SERCOM7) USART Control C */
74#define REG_SERCOM7_USART_BAUD (0x43000C0C) /**< \brief (SERCOM7) USART Baud Rate */
75#define REG_SERCOM7_USART_RXPL (0x43000C0E) /**< \brief (SERCOM7) USART Receive Pulse Length */
76#define REG_SERCOM7_USART_INTENCLR (0x43000C14) /**< \brief (SERCOM7) USART Interrupt Enable Clear */
77#define REG_SERCOM7_USART_INTENSET (0x43000C16) /**< \brief (SERCOM7) USART Interrupt Enable Set */
78#define REG_SERCOM7_USART_INTFLAG (0x43000C18) /**< \brief (SERCOM7) USART Interrupt Flag Status and Clear */
79#define REG_SERCOM7_USART_STATUS (0x43000C1A) /**< \brief (SERCOM7) USART Status */
80#define REG_SERCOM7_USART_SYNCBUSY (0x43000C1C) /**< \brief (SERCOM7) USART Synchronization Busy */
81#define REG_SERCOM7_USART_RXERRCNT (0x43000C20) /**< \brief (SERCOM7) USART Receive Error Count */
82#define REG_SERCOM7_USART_LENGTH (0x43000C22) /**< \brief (SERCOM7) USART Length */
83#define REG_SERCOM7_USART_DATA (0x43000C28) /**< \brief (SERCOM7) USART Data */
84#define REG_SERCOM7_USART_DBGCTRL (0x43000C30) /**< \brief (SERCOM7) USART Debug Control */
85#else
86#define REG_SERCOM7_I2CM_CTRLA (*(RwReg *)0x43000C00UL) /**< \brief (SERCOM7) I2CM Control A */
87#define REG_SERCOM7_I2CM_CTRLB (*(RwReg *)0x43000C04UL) /**< \brief (SERCOM7) I2CM Control B */
88#define REG_SERCOM7_I2CM_CTRLC (*(RwReg *)0x43000C08UL) /**< \brief (SERCOM7) I2CM Control C */
89#define REG_SERCOM7_I2CM_BAUD (*(RwReg *)0x43000C0CUL) /**< \brief (SERCOM7) I2CM Baud Rate */
90#define REG_SERCOM7_I2CM_INTENCLR (*(RwReg8 *)0x43000C14UL) /**< \brief (SERCOM7) I2CM Interrupt Enable Clear */
91#define REG_SERCOM7_I2CM_INTENSET (*(RwReg8 *)0x43000C16UL) /**< \brief (SERCOM7) I2CM Interrupt Enable Set */
92#define REG_SERCOM7_I2CM_INTFLAG (*(RwReg8 *)0x43000C18UL) /**< \brief (SERCOM7) I2CM Interrupt Flag Status and Clear */
93#define REG_SERCOM7_I2CM_STATUS (*(RwReg16*)0x43000C1AUL) /**< \brief (SERCOM7) I2CM Status */
94#define REG_SERCOM7_I2CM_SYNCBUSY (*(RoReg *)0x43000C1CUL) /**< \brief (SERCOM7) I2CM Synchronization Busy */
95#define REG_SERCOM7_I2CM_ADDR (*(RwReg *)0x43000C24UL) /**< \brief (SERCOM7) I2CM Address */
96#define REG_SERCOM7_I2CM_DATA (*(RwReg *)0x43000C28UL) /**< \brief (SERCOM7) I2CM Data */
97#define REG_SERCOM7_I2CM_DBGCTRL (*(RwReg8 *)0x43000C30UL) /**< \brief (SERCOM7) I2CM Debug Control */
98#define REG_SERCOM7_I2CS_CTRLA (*(RwReg *)0x43000C00UL) /**< \brief (SERCOM7) I2CS Control A */
99#define REG_SERCOM7_I2CS_CTRLB (*(RwReg *)0x43000C04UL) /**< \brief (SERCOM7) I2CS Control B */
100#define REG_SERCOM7_I2CS_CTRLC (*(RwReg *)0x43000C08UL) /**< \brief (SERCOM7) I2CS Control C */
101#define REG_SERCOM7_I2CS_INTENCLR (*(RwReg8 *)0x43000C14UL) /**< \brief (SERCOM7) I2CS Interrupt Enable Clear */
102#define REG_SERCOM7_I2CS_INTENSET (*(RwReg8 *)0x43000C16UL) /**< \brief (SERCOM7) I2CS Interrupt Enable Set */
103#define REG_SERCOM7_I2CS_INTFLAG (*(RwReg8 *)0x43000C18UL) /**< \brief (SERCOM7) I2CS Interrupt Flag Status and Clear */
104#define REG_SERCOM7_I2CS_STATUS (*(RwReg16*)0x43000C1AUL) /**< \brief (SERCOM7) I2CS Status */
105#define REG_SERCOM7_I2CS_SYNCBUSY (*(RoReg *)0x43000C1CUL) /**< \brief (SERCOM7) I2CS Synchronization Busy */
106#define REG_SERCOM7_I2CS_LENGTH (*(RwReg16*)0x43000C22UL) /**< \brief (SERCOM7) I2CS Length */
107#define REG_SERCOM7_I2CS_ADDR (*(RwReg *)0x43000C24UL) /**< \brief (SERCOM7) I2CS Address */
108#define REG_SERCOM7_I2CS_DATA (*(RwReg *)0x43000C28UL) /**< \brief (SERCOM7) I2CS Data */
109#define REG_SERCOM7_SPI_CTRLA (*(RwReg *)0x43000C00UL) /**< \brief (SERCOM7) SPI Control A */
110#define REG_SERCOM7_SPI_CTRLB (*(RwReg *)0x43000C04UL) /**< \brief (SERCOM7) SPI Control B */
111#define REG_SERCOM7_SPI_CTRLC (*(RwReg *)0x43000C08UL) /**< \brief (SERCOM7) SPI Control C */
112#define REG_SERCOM7_SPI_BAUD (*(RwReg8 *)0x43000C0CUL) /**< \brief (SERCOM7) SPI Baud Rate */
113#define REG_SERCOM7_SPI_INTENCLR (*(RwReg8 *)0x43000C14UL) /**< \brief (SERCOM7) SPI Interrupt Enable Clear */
114#define REG_SERCOM7_SPI_INTENSET (*(RwReg8 *)0x43000C16UL) /**< \brief (SERCOM7) SPI Interrupt Enable Set */
115#define REG_SERCOM7_SPI_INTFLAG (*(RwReg8 *)0x43000C18UL) /**< \brief (SERCOM7) SPI Interrupt Flag Status and Clear */
116#define REG_SERCOM7_SPI_STATUS (*(RwReg16*)0x43000C1AUL) /**< \brief (SERCOM7) SPI Status */
117#define REG_SERCOM7_SPI_SYNCBUSY (*(RoReg *)0x43000C1CUL) /**< \brief (SERCOM7) SPI Synchronization Busy */
118#define REG_SERCOM7_SPI_LENGTH (*(RwReg16*)0x43000C22UL) /**< \brief (SERCOM7) SPI Length */
119#define REG_SERCOM7_SPI_ADDR (*(RwReg *)0x43000C24UL) /**< \brief (SERCOM7) SPI Address */
120#define REG_SERCOM7_SPI_DATA (*(RwReg *)0x43000C28UL) /**< \brief (SERCOM7) SPI Data */
121#define REG_SERCOM7_SPI_DBGCTRL (*(RwReg8 *)0x43000C30UL) /**< \brief (SERCOM7) SPI Debug Control */
122#define REG_SERCOM7_USART_CTRLA (*(RwReg *)0x43000C00UL) /**< \brief (SERCOM7) USART Control A */
123#define REG_SERCOM7_USART_CTRLB (*(RwReg *)0x43000C04UL) /**< \brief (SERCOM7) USART Control B */
124#define REG_SERCOM7_USART_CTRLC (*(RwReg *)0x43000C08UL) /**< \brief (SERCOM7) USART Control C */
125#define REG_SERCOM7_USART_BAUD (*(RwReg16*)0x43000C0CUL) /**< \brief (SERCOM7) USART Baud Rate */
126#define REG_SERCOM7_USART_RXPL (*(RwReg8 *)0x43000C0EUL) /**< \brief (SERCOM7) USART Receive Pulse Length */
127#define REG_SERCOM7_USART_INTENCLR (*(RwReg8 *)0x43000C14UL) /**< \brief (SERCOM7) USART Interrupt Enable Clear */
128#define REG_SERCOM7_USART_INTENSET (*(RwReg8 *)0x43000C16UL) /**< \brief (SERCOM7) USART Interrupt Enable Set */
129#define REG_SERCOM7_USART_INTFLAG (*(RwReg8 *)0x43000C18UL) /**< \brief (SERCOM7) USART Interrupt Flag Status and Clear */
130#define REG_SERCOM7_USART_STATUS (*(RwReg16*)0x43000C1AUL) /**< \brief (SERCOM7) USART Status */
131#define REG_SERCOM7_USART_SYNCBUSY (*(RoReg *)0x43000C1CUL) /**< \brief (SERCOM7) USART Synchronization Busy */
132#define REG_SERCOM7_USART_RXERRCNT (*(RoReg8 *)0x43000C20UL) /**< \brief (SERCOM7) USART Receive Error Count */
133#define REG_SERCOM7_USART_LENGTH (*(RwReg16*)0x43000C22UL) /**< \brief (SERCOM7) USART Length */
134#define REG_SERCOM7_USART_DATA (*(RwReg *)0x43000C28UL) /**< \brief (SERCOM7) USART Data */
135#define REG_SERCOM7_USART_DBGCTRL (*(RwReg8 *)0x43000C30UL) /**< \brief (SERCOM7) USART Debug Control */
136#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
137
138/* ========== Instance parameters for SERCOM7 peripheral ========== */
139#define SERCOM7_CLK_REDUCTION 1 // Reduce clock options to pin 1 for SPI and USART
140#define SERCOM7_DLY_COMPENSATION 1 // Compensates for a fast DLY50 element. Assuming 20ns
141#define SERCOM7_DMA 1 // DMA support implemented?
142#define SERCOM7_DMAC_ID_RX 18 // Index of DMA RX trigger
143#define SERCOM7_DMAC_ID_TX 19 // Index of DMA TX trigger
144#define SERCOM7_FIFO_DEPTH_POWER 1 // 2^FIFO_DEPTH_POWER gives rx FIFO depth.
145#define SERCOM7_GCLK_ID_CORE 37
146#define SERCOM7_GCLK_ID_SLOW 3
147#define SERCOM7_INT_MSB 6
148#define SERCOM7_PMSB 3
149#define SERCOM7_RETENTION_SUPPORT 0 // Retention supported?
150#define SERCOM7_SE_CNT 1 // SE counter included?
151#define SERCOM7_SPI 1 // SPI mode implemented?
152#define SERCOM7_SPI_HW_SS_CTRL 1 // Master _SS hardware control implemented?
153#define SERCOM7_SPI_ICSPACE_EXT 1 // SPI inter character space implemented?
154#define SERCOM7_SPI_OZMO 0 // OZMO features implemented?
155#define SERCOM7_SPI_WAKE_ON_SSL 1 // _SS low detect implemented?
156#define SERCOM7_TTBIT_EXTENSION 1 // 32-bit extension implemented?
157#define SERCOM7_TWIM 1 // TWI Master mode implemented?
158#define SERCOM7_TWIS 1 // TWI Slave mode implemented?
159#define SERCOM7_TWIS_AUTO_ACK 1 // TWI slave automatic acknowledge implemented?
160#define SERCOM7_TWIS_GROUP_CMD 1 // TWI slave group command implemented?
161#define SERCOM7_TWIS_SDASETUP_CNT_SIZE 8 // TWIS sda setup count size
162#define SERCOM7_TWIS_SDASETUP_SIZE 4 // TWIS sda setup size
163#define SERCOM7_TWIS_SUDAT 1 // TWI slave SDA setup implemented?
164#define SERCOM7_TWI_FASTMP 1 // TWI fast mode plus implemented?
165#define SERCOM7_TWI_HSMODE 1 // USART mode implemented?
166#define SERCOM7_TWI_SCLSM_MODE 1 // TWI SCL clock stretch mode implemented?
167#define SERCOM7_TWI_SMB_TIMEOUTS 1 // TWI SMBus timeouts implemented?
168#define SERCOM7_TWI_TENBIT_ADR 1 // TWI ten bit enabled?
169#define SERCOM7_USART 1 // USART mode implemented?
170#define SERCOM7_USART_AUTOBAUD 1 // USART autobaud implemented?
171#define SERCOM7_USART_COLDET 1 // USART collision detection implemented?
172#define SERCOM7_USART_FLOW_CTRL 1 // USART flow control implemented?
173#define SERCOM7_USART_FRAC_BAUD 1 // USART fractional BAUD implemented?
174#define SERCOM7_USART_IRDA 1 // USART IrDA implemented?
175#define SERCOM7_USART_ISO7816 1 // USART ISO7816 mode implemented?
176#define SERCOM7_USART_LIN_MASTER 1 // USART LIN Master mode implemented?
177#define SERCOM7_USART_RS485 1 // USART RS485 mode implemented?
178#define SERCOM7_USART_SAMPA_EXT 1 // USART sample adjust implemented?
179#define SERCOM7_USART_SAMPR_EXT 1 // USART oversampling adjustment implemented?
180
181#endif /* _SAME54_SERCOM7_INSTANCE_ */