| The USART Synchronous Driver |
| ============================ |
| |
| The universal synchronous and asynchronous receiver and transmitter |
| (USART) is usually used to transfer data from one device to the other. |
| |
| User can set action for flow control pins by function usart_set_flow_control, |
| if the flow control is enabled. All the available states are defined in union |
| usart_flow_control_state. |
| |
| Note that user can set state of flow control pins only if automatic support of |
| the flow control is not supported by the hardware. |
| |
| Features |
| -------- |
| |
| * Initialization/de-initialization |
| * Enabling/disabling |
| * Control of the following settings: |
| |
| * Baudrate |
| * UART or USRT communication mode |
| * Character size |
| * Data order |
| * Flow control |
| * Data transfer: transmission, reception |
| |
| Applications |
| ------------ |
| |
| They are commonly used in a terminal application or low-speed communication |
| between devices. |
| |
| Dependencies |
| ------------ |
| |
| USART capable hardware. |
| |
| Concurrency |
| ----------- |
| |
| Write buffer should not be changed while data is being sent. |
| |
| |
| Limitations |
| ----------- |
| |
| * The driver does not support 9-bit character size. |
| * The "USART with ISO7816" mode can be only used in ISO7816 capable devices. |
| And the SCK pin can't be set directly. Application can use a GCLK output PIN |
| to generate SCK. For example to communicate with a SMARTCARD with ISO7816 |
| (F = 372 ; D = 1), and baudrate=9600, the SCK pin output frequency should be |
| config as 372*9600=3571200Hz. More information can be refer to ISO7816 Specification. |
| |
| Known issues and workarounds |
| ---------------------------- |
| |
| N/A |