switch from dev board to prototype
the SAM E54 Xplained Pro development board uses a SAM E54P20N
micro-controller.
the sysmocom sysmoOCTSIM prototype uses a SAM E54N19A
micro-controller.
the system LED and UART debug GPIO are different, else the code
is the same.
the Atmel START definitions have been updated accordingly.
Change-Id: Ifd15f6759c51b42a8d11b09f9f495d7e7a5b6afc
diff --git a/sysmoOCTSIM/config/hpl_gclk_config.h b/sysmoOCTSIM/config/hpl_gclk_config.h
index 12c1539..d16af6f 100644
--- a/sysmoOCTSIM/config/hpl_gclk_config.h
+++ b/sysmoOCTSIM/config/hpl_gclk_config.h
@@ -328,7 +328,7 @@
// <i> This defines the clock source for generic clock generator 4
// <id> gclk_gen_4_oscillator
#ifndef CONF_GCLK_GEN_4_SOURCE
-#define CONF_GCLK_GEN_4_SOURCE GCLK_GENCTRL_SRC_XOSC0
+#define CONF_GCLK_GEN_4_SOURCE GCLK_GENCTRL_SRC_XOSC1
#endif
// <q> Run in Standby
@@ -404,7 +404,7 @@
// <i> This defines the clock source for generic clock generator 5
// <id> gclk_gen_5_oscillator
#ifndef CONF_GCLK_GEN_5_SOURCE
-#define CONF_GCLK_GEN_5_SOURCE GCLK_GENCTRL_SRC_XOSC0
+#define CONF_GCLK_GEN_5_SOURCE GCLK_GENCTRL_SRC_XOSC1
#endif
// <q> Run in Standby
@@ -480,7 +480,7 @@
// <i> This defines the clock source for generic clock generator 6
// <id> gclk_gen_6_oscillator
#ifndef CONF_GCLK_GEN_6_SOURCE
-#define CONF_GCLK_GEN_6_SOURCE GCLK_GENCTRL_SRC_XOSC0
+#define CONF_GCLK_GEN_6_SOURCE GCLK_GENCTRL_SRC_XOSC1
#endif
// <q> Run in Standby
@@ -556,7 +556,7 @@
// <i> This defines the clock source for generic clock generator 7
// <id> gclk_gen_7_oscillator
#ifndef CONF_GCLK_GEN_7_SOURCE
-#define CONF_GCLK_GEN_7_SOURCE GCLK_GENCTRL_SRC_XOSC0
+#define CONF_GCLK_GEN_7_SOURCE GCLK_GENCTRL_SRC_XOSC1
#endif
// <q> Run in Standby
@@ -632,7 +632,7 @@
// <i> This defines the clock source for generic clock generator 8
// <id> gclk_gen_8_oscillator
#ifndef CONF_GCLK_GEN_8_SOURCE
-#define CONF_GCLK_GEN_8_SOURCE GCLK_GENCTRL_SRC_XOSC0
+#define CONF_GCLK_GEN_8_SOURCE GCLK_GENCTRL_SRC_XOSC1
#endif
// <q> Run in Standby
@@ -708,7 +708,7 @@
// <i> This defines the clock source for generic clock generator 9
// <id> gclk_gen_9_oscillator
#ifndef CONF_GCLK_GEN_9_SOURCE
-#define CONF_GCLK_GEN_9_SOURCE GCLK_GENCTRL_SRC_XOSC0
+#define CONF_GCLK_GEN_9_SOURCE GCLK_GENCTRL_SRC_XOSC1
#endif
// <q> Run in Standby
@@ -784,7 +784,7 @@
// <i> This defines the clock source for generic clock generator 10
// <id> gclk_gen_10_oscillator
#ifndef CONF_GCLK_GEN_10_SOURCE
-#define CONF_GCLK_GEN_10_SOURCE GCLK_GENCTRL_SRC_XOSC0
+#define CONF_GCLK_GEN_10_SOURCE GCLK_GENCTRL_SRC_XOSC1
#endif
// <q> Run in Standby