/** | |
* \file | |
* | |
* \brief Instance description for ADC1 | |
* | |
* Copyright (c) 2019 Microchip Technology Inc. | |
* | |
* \asf_license_start | |
* | |
* \page License | |
* | |
* SPDX-License-Identifier: Apache-2.0 | |
* | |
* Licensed under the Apache License, Version 2.0 (the "License"); you may | |
* not use this file except in compliance with the License. | |
* You may obtain a copy of the Licence at | |
* | |
* http://www.apache.org/licenses/LICENSE-2.0 | |
* | |
* Unless required by applicable law or agreed to in writing, software | |
* distributed under the License is distributed on an AS IS BASIS, WITHOUT | |
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
* See the License for the specific language governing permissions and | |
* limitations under the License. | |
* | |
* \asf_license_stop | |
* | |
*/ | |
#ifndef _SAME54_ADC1_INSTANCE_ | |
#define _SAME54_ADC1_INSTANCE_ | |
/* ========== Register definition for ADC1 peripheral ========== */ | |
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
#define REG_ADC1_CTRLA (0x43002000) /**< \brief (ADC1) Control A */ | |
#define REG_ADC1_EVCTRL (0x43002002) /**< \brief (ADC1) Event Control */ | |
#define REG_ADC1_DBGCTRL (0x43002003) /**< \brief (ADC1) Debug Control */ | |
#define REG_ADC1_INPUTCTRL (0x43002004) /**< \brief (ADC1) Input Control */ | |
#define REG_ADC1_CTRLB (0x43002006) /**< \brief (ADC1) Control B */ | |
#define REG_ADC1_REFCTRL (0x43002008) /**< \brief (ADC1) Reference Control */ | |
#define REG_ADC1_AVGCTRL (0x4300200A) /**< \brief (ADC1) Average Control */ | |
#define REG_ADC1_SAMPCTRL (0x4300200B) /**< \brief (ADC1) Sample Time Control */ | |
#define REG_ADC1_WINLT (0x4300200C) /**< \brief (ADC1) Window Monitor Lower Threshold */ | |
#define REG_ADC1_WINUT (0x4300200E) /**< \brief (ADC1) Window Monitor Upper Threshold */ | |
#define REG_ADC1_GAINCORR (0x43002010) /**< \brief (ADC1) Gain Correction */ | |
#define REG_ADC1_OFFSETCORR (0x43002012) /**< \brief (ADC1) Offset Correction */ | |
#define REG_ADC1_SWTRIG (0x43002014) /**< \brief (ADC1) Software Trigger */ | |
#define REG_ADC1_INTENCLR (0x4300202C) /**< \brief (ADC1) Interrupt Enable Clear */ | |
#define REG_ADC1_INTENSET (0x4300202D) /**< \brief (ADC1) Interrupt Enable Set */ | |
#define REG_ADC1_INTFLAG (0x4300202E) /**< \brief (ADC1) Interrupt Flag Status and Clear */ | |
#define REG_ADC1_STATUS (0x4300202F) /**< \brief (ADC1) Status */ | |
#define REG_ADC1_SYNCBUSY (0x43002030) /**< \brief (ADC1) Synchronization Busy */ | |
#define REG_ADC1_DSEQDATA (0x43002034) /**< \brief (ADC1) DMA Sequencial Data */ | |
#define REG_ADC1_DSEQCTRL (0x43002038) /**< \brief (ADC1) DMA Sequential Control */ | |
#define REG_ADC1_DSEQSTAT (0x4300203C) /**< \brief (ADC1) DMA Sequencial Status */ | |
#define REG_ADC1_RESULT (0x43002040) /**< \brief (ADC1) Result Conversion Value */ | |
#define REG_ADC1_RESS (0x43002044) /**< \brief (ADC1) Last Sample Result */ | |
#define REG_ADC1_CALIB (0x43002048) /**< \brief (ADC1) Calibration */ | |
#else | |
#define REG_ADC1_CTRLA (*(RwReg16*)0x43002000UL) /**< \brief (ADC1) Control A */ | |
#define REG_ADC1_EVCTRL (*(RwReg8 *)0x43002002UL) /**< \brief (ADC1) Event Control */ | |
#define REG_ADC1_DBGCTRL (*(RwReg8 *)0x43002003UL) /**< \brief (ADC1) Debug Control */ | |
#define REG_ADC1_INPUTCTRL (*(RwReg16*)0x43002004UL) /**< \brief (ADC1) Input Control */ | |
#define REG_ADC1_CTRLB (*(RwReg16*)0x43002006UL) /**< \brief (ADC1) Control B */ | |
#define REG_ADC1_REFCTRL (*(RwReg8 *)0x43002008UL) /**< \brief (ADC1) Reference Control */ | |
#define REG_ADC1_AVGCTRL (*(RwReg8 *)0x4300200AUL) /**< \brief (ADC1) Average Control */ | |
#define REG_ADC1_SAMPCTRL (*(RwReg8 *)0x4300200BUL) /**< \brief (ADC1) Sample Time Control */ | |
#define REG_ADC1_WINLT (*(RwReg16*)0x4300200CUL) /**< \brief (ADC1) Window Monitor Lower Threshold */ | |
#define REG_ADC1_WINUT (*(RwReg16*)0x4300200EUL) /**< \brief (ADC1) Window Monitor Upper Threshold */ | |
#define REG_ADC1_GAINCORR (*(RwReg16*)0x43002010UL) /**< \brief (ADC1) Gain Correction */ | |
#define REG_ADC1_OFFSETCORR (*(RwReg16*)0x43002012UL) /**< \brief (ADC1) Offset Correction */ | |
#define REG_ADC1_SWTRIG (*(RwReg8 *)0x43002014UL) /**< \brief (ADC1) Software Trigger */ | |
#define REG_ADC1_INTENCLR (*(RwReg8 *)0x4300202CUL) /**< \brief (ADC1) Interrupt Enable Clear */ | |
#define REG_ADC1_INTENSET (*(RwReg8 *)0x4300202DUL) /**< \brief (ADC1) Interrupt Enable Set */ | |
#define REG_ADC1_INTFLAG (*(RwReg8 *)0x4300202EUL) /**< \brief (ADC1) Interrupt Flag Status and Clear */ | |
#define REG_ADC1_STATUS (*(RoReg8 *)0x4300202FUL) /**< \brief (ADC1) Status */ | |
#define REG_ADC1_SYNCBUSY (*(RoReg *)0x43002030UL) /**< \brief (ADC1) Synchronization Busy */ | |
#define REG_ADC1_DSEQDATA (*(WoReg *)0x43002034UL) /**< \brief (ADC1) DMA Sequencial Data */ | |
#define REG_ADC1_DSEQCTRL (*(RwReg *)0x43002038UL) /**< \brief (ADC1) DMA Sequential Control */ | |
#define REG_ADC1_DSEQSTAT (*(RoReg *)0x4300203CUL) /**< \brief (ADC1) DMA Sequencial Status */ | |
#define REG_ADC1_RESULT (*(RoReg16*)0x43002040UL) /**< \brief (ADC1) Result Conversion Value */ | |
#define REG_ADC1_RESS (*(RoReg16*)0x43002044UL) /**< \brief (ADC1) Last Sample Result */ | |
#define REG_ADC1_CALIB (*(RwReg16*)0x43002048UL) /**< \brief (ADC1) Calibration */ | |
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
/* ========== Instance parameters for ADC1 peripheral ========== */ | |
#define ADC1_BANDGAP 27 // MUXPOS value to select BANDGAP | |
#define ADC1_CTAT 29 // MUXPOS value to select CTAT | |
#define ADC1_DMAC_ID_RESRDY 70 // Index of DMA RESRDY trigger | |
#define ADC1_DMAC_ID_SEQ 71 // Index of DMA SEQ trigger | |
#define ADC1_EXTCHANNEL_MSB 15 // Number of external channels | |
#define ADC1_GCLK_ID 41 // Index of Generic Clock | |
#define ADC1_MASTER_SLAVE_MODE 2 // ADC Master/Slave Mode | |
#define ADC1_OPAMP2 0 // MUXPOS value to select OPAMP2 | |
#define ADC1_OPAMP01 0 // MUXPOS value to select OPAMP01 | |
#define ADC1_PTAT 28 // MUXPOS value to select PTAT | |
#define ADC1_TOUCH_IMPLEMENTED 0 // TOUCH implemented or not | |
#define ADC1_TOUCH_LINES_NUM 1 // Number of touch lines | |
#endif /* _SAME54_ADC1_INSTANCE_ */ |