| ===test_acc_mgr_no_ramp=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_mgr_no_ramp() |
| do_allowed_len_adm_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3fe (active_len=9, ramp_len=10, adm_len=9, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x01 |
| (bts=0) ACC: update ACC allowed active subset 0x3fe -> 0x3fc (active_len=8, ramp_len=10, adm_len=8, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x03 |
| (bts=0) ACC: update ACC allowed active subset 0x3fc -> 0x3f8 (active_len=7, ramp_len=10, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x07 |
| (bts=0) ACC: update ACC allowed active subset 0x3f8 -> 0x3f0 (active_len=6, ramp_len=10, adm_len=6, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x3e0 (active_len=5, ramp_len=10, adm_len=5, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x1f |
| (bts=0) ACC: update ACC allowed active subset 0x3e0 -> 0x3c0 (active_len=4, ramp_len=10, adm_len=4, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x3f |
| (bts=0) ACC: update ACC allowed active subset 0x3c0 -> 0x380 (active_len=3, ramp_len=10, adm_len=3, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x7f |
| (bts=0) ACC: update ACC allowed active subset 0x380 -> 0x300 (active_len=2, ramp_len=10, adm_len=2, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x200 (active_len=1, ramp_len=10, adm_len=1, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=10, adm_len=0, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=10, adm_len=1, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=10, adm_len=2, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=10, adm_len=3, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=10, adm_len=4, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=10, adm_len=5, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=10, adm_len=6, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=10, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=10, adm_len=8, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=10, adm_len=9, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| do_allowed_len_adm_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3f0 (active_len=6, ramp_len=10, adm_len=6, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x300 (active_len=2, ramp_len=10, adm_len=2, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x000 (active_len=0, ramp_len=10, adm_len=0, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x00f (active_len=4, ramp_len=10, adm_len=4, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x0ff (active_len=8, ramp_len=10, adm_len=8, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| *** Barring some ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| do_allowed_len_adm_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=9, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=8, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=7, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=6, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x158 (active_len=4, ramp_len=10, adm_len=4, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xa7 |
| (bts=0) ACC: update ACC allowed active subset 0x158 -> 0x150 (active_len=3, ramp_len=10, adm_len=3, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xaf |
| (bts=0) ACC: update ACC allowed active subset 0x150 -> 0x140 (active_len=2, ramp_len=10, adm_len=2, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x140 -> 0x100 (active_len=1, ramp_len=10, adm_len=1, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x100 -> 0x000 (active_len=0, ramp_len=10, adm_len=0, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x002 (active_len=1, ramp_len=10, adm_len=1, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| (bts=0) ACC: update ACC allowed active subset 0x002 -> 0x00a (active_len=2, ramp_len=10, adm_len=2, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf5 |
| (bts=0) ACC: update ACC allowed active subset 0x00a -> 0x01a (active_len=3, ramp_len=10, adm_len=3, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe5 |
| (bts=0) ACC: update ACC allowed active subset 0x01a -> 0x05a (active_len=4, ramp_len=10, adm_len=4, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x05a -> 0x15a (active_len=5, ramp_len=10, adm_len=5, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=6, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=7, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=8, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=9, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| do_allowed_len_adm_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=6, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x140 (active_len=2, ramp_len=10, adm_len=2, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x140 -> 0x000 (active_len=0, ramp_len=10, adm_len=0, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x05a (active_len=4, ramp_len=10, adm_len=4, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x05a -> 0x15a (active_len=5, ramp_len=10, adm_len=8, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| *** Barring ALL ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=10, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| *** Barring zero ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| BTS deallocated OK in test_acc_mgr_no_ramp() |
| ===test_acc_mgr_manual_ramp=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_mgr_manual_ramp() |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3fe (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x01 |
| (bts=0) ACC: update ACC allowed active subset 0x3fe -> 0x3fc (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x03 |
| (bts=0) ACC: update ACC allowed active subset 0x3fc -> 0x3f8 (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x07 |
| (bts=0) ACC: update ACC allowed active subset 0x3f8 -> 0x3f0 (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x3e0 (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x1f |
| (bts=0) ACC: update ACC allowed active subset 0x3e0 -> 0x3c0 (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x3f |
| (bts=0) ACC: update ACC allowed active subset 0x3c0 -> 0x380 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x7f |
| (bts=0) ACC: update ACC allowed active subset 0x380 -> 0x300 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x200 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3f0 (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x300 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| *** Barring some ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x24c (active_len=4, ramp_len=10, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=9, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=8, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=7, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=6, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=5, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x248 (active_len=3, ramp_len=3, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xb7 |
| (bts=0) ACC: update ACC allowed active subset 0x248 -> 0x240 (active_len=2, ramp_len=2, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x240 -> 0x200 (active_len=1, ramp_len=1, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| (bts=0) ACC: update ACC allowed active subset 0x00c -> 0x04c (active_len=3, ramp_len=3, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb3 |
| (bts=0) ACC: update ACC allowed active subset 0x04c -> 0x24c (active_len=4, ramp_len=4, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=5, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=6, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=7, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=8, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=9, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=10, adm_len=10, perm_len=4, rotation=off) |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=6, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x240 (active_len=2, ramp_len=2, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x240 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x24c (active_len=4, ramp_len=4, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=8, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=10, adm_len=10, perm_len=4, rotation=off) |
| *** Barring ALL ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=10, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=9, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=8, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=7, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=6, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=5, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=4, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=3, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=2, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=1, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=1, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=2, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=3, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=4, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=5, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=6, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=7, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=8, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=9, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=10, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=6, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=2, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=4, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=8, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=10, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| *** Barring zero ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3fe (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x01 |
| (bts=0) ACC: update ACC allowed active subset 0x3fe -> 0x3fc (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x03 |
| (bts=0) ACC: update ACC allowed active subset 0x3fc -> 0x3f8 (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x07 |
| (bts=0) ACC: update ACC allowed active subset 0x3f8 -> 0x3f0 (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x3e0 (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x1f |
| (bts=0) ACC: update ACC allowed active subset 0x3e0 -> 0x3c0 (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x3f |
| (bts=0) ACC: update ACC allowed active subset 0x3c0 -> 0x380 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x7f |
| (bts=0) ACC: update ACC allowed active subset 0x380 -> 0x300 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x200 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3f0 (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x300 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| *** Barring some ACCs + adm len 4 *** |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3c0 (active_len=4, ramp_len=10, adm_len=4, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x3f |
| (bts=0) ACC: New ACC allowed subset 0x24c (active_len=4, ramp_len=10, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x248 (active_len=3, ramp_len=3, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xb7 |
| (bts=0) ACC: update ACC allowed active subset 0x248 -> 0x240 (active_len=2, ramp_len=2, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x240 -> 0x200 (active_len=1, ramp_len=1, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=0, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x004 (active_len=1, ramp_len=1, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| (bts=0) ACC: update ACC allowed active subset 0x00c -> 0x04c (active_len=3, ramp_len=3, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb3 |
| (bts=0) ACC: update ACC allowed active subset 0x04c -> 0x24c (active_len=4, ramp_len=4, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x240 (active_len=2, ramp_len=2, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x240 -> 0x000 (active_len=0, ramp_len=0, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x24c (active_len=4, ramp_len=4, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| BTS deallocated OK in test_acc_mgr_manual_ramp() |
| ===test_acc_mgr_rotate=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_mgr_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x1e0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x1f |
| sys={2.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1e0 -> 0x1c1 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={4.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={6.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={8.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x047 -> 0x00f (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={10.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x00f -> 0x01e (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe1 |
| sys={12.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x01e -> 0x03c (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc3 |
| sys={14.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x03c -> 0x078 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x87 |
| sys={16.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x078 -> 0x0f0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x0f |
| sys={18.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0f0 -> 0x1e0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x1f |
| sys={20.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1e0 -> 0x1c1 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={22.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={24.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={26.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x047 -> 0x00f (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={28.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x00f -> 0x01e (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe1 |
| sys={30.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x01e -> 0x03c (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc3 |
| sys={32.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x03c -> 0x078 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x87 |
| sys={34.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x078 -> 0x0f0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x0f |
| sys={36.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0f0 -> 0x1e0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x1f |
| sys={38.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1e0 -> 0x1c1 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={40.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| BTS deallocated OK in test_acc_mgr_rotate() |
| ===test_acc_ramp_fixed=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_fixed() |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={50.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| sys={100.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| sys={150.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={200.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| sys={250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={300.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| sys={350.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| sys={400.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| sys={450.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| BTS deallocated OK in test_acc_ramp_fixed() |
| ===test_acc_ramp_fixed2=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_fixed2() |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3f8 (active_len=7, ramp_len=10, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x07 |
| (bts=0) ACC: update ACC allowed active subset 0x3f8 -> 0x000 (active_len=0, ramp_len=0, adm_len=7, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x007 (active_len=3, ramp_len=3, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| sys={30.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x03f (active_len=6, ramp_len=6, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={60.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=9, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| sys={90.000000}: select() |
| BTS deallocated OK in test_acc_ramp_fixed2() |
| ===test_acc_ramp_fixed3=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_fixed3() |
| *** Barring some ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={30.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x002 -> 0x00a (active_len=2, ramp_len=2, adm_len=10, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf5 |
| sys={60.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x00a -> 0x01a (active_len=3, ramp_len=3, adm_len=10, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe5 |
| sys={90.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x01a -> 0x05a (active_len=4, ramp_len=4, adm_len=10, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xa5 |
| sys={120.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x05a -> 0x15a (active_len=5, ramp_len=5, adm_len=10, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| sys={150.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=6, adm_len=10, perm_len=5, rotation=off) |
| sys={180.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=7, adm_len=10, perm_len=5, rotation=off) |
| sys={210.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=8, adm_len=10, perm_len=5, rotation=off) |
| sys={240.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=9, adm_len=10, perm_len=5, rotation=off) |
| sys={270.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| BTS deallocated OK in test_acc_ramp_fixed3() |
| ===test_acc_ramp_dynamic=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_dynamic() |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={60.000000}: select(): load=10 -> step_sec=60 |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| sys={180.000000}: select(): load=20 -> step_sec=120 |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| sys={360.000000}: select(): load=30 -> step_sec=180 |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={600.000000}: select(): load=40 -> step_sec=240 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| sys={900.000000}: select(): load=50 -> step_sec=300 |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={1260.000000}: select(): load=60 -> step_sec=360 |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| sys={1680.000000}: select(): load=70 -> step_sec=420 |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| sys={2160.000000}: select(): load=80 -> step_sec=480 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| sys={2700.000000}: select(): load=90 -> step_sec=540 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| BTS deallocated OK in test_acc_ramp_dynamic() |
| ===test_acc_ramp_fixed_rotate=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_fixed_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={100.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={200.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={350.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={450.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x018 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={500.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x030 -> 0x070 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x8f |
| sys={600.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x070 -> 0x0e0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x1f |
| sys={700.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0e0 -> 0x1c0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3f |
| sys={750.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1c0 -> 0x1c1 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={850.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={950.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={1000.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x047 -> 0x0c7 (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x38 |
| sys={1100.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c7 -> 0x04f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb0 |
| sys={1200.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x04f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| sys={1250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={1350.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x03f -> 0x07e (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x81 |
| sys={1450.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x07e -> 0x0fc (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x03 |
| sys={1500.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0fc -> 0x1fc (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x03 |
| sys={1600.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fc -> 0x1f9 (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x06 |
| sys={1700.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1f9 -> 0x0fb (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x04 |
| sys={1750.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0fb -> 0x1fb (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x04 |
| sys={1850.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fb -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| sys={1950.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0ff -> 0x1fe (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x01 |
| sys={2000.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1fe -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| sys={2250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| BTS deallocated OK in test_acc_ramp_fixed_rotate() |