| ===test_acc_mgr_no_ramp=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_mgr_no_ramp() |
| do_allowed_len_adm_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3fe (active_len=9, ramp_len=10, adm_len=9, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x01 |
| (bts=0) ACC: update ACC allowed active subset 0x3fe -> 0x3fc (active_len=8, ramp_len=10, adm_len=8, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x03 |
| (bts=0) ACC: update ACC allowed active subset 0x3fc -> 0x3f8 (active_len=7, ramp_len=10, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x07 |
| (bts=0) ACC: update ACC allowed active subset 0x3f8 -> 0x3f0 (active_len=6, ramp_len=10, adm_len=6, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x3e0 (active_len=5, ramp_len=10, adm_len=5, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x1f |
| (bts=0) ACC: update ACC allowed active subset 0x3e0 -> 0x3c0 (active_len=4, ramp_len=10, adm_len=4, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x3f |
| (bts=0) ACC: update ACC allowed active subset 0x3c0 -> 0x380 (active_len=3, ramp_len=10, adm_len=3, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x7f |
| (bts=0) ACC: update ACC allowed active subset 0x380 -> 0x300 (active_len=2, ramp_len=10, adm_len=2, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x200 (active_len=1, ramp_len=10, adm_len=1, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=10, adm_len=0, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=10, adm_len=1, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=10, adm_len=2, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=10, adm_len=3, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=10, adm_len=4, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=10, adm_len=5, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=10, adm_len=6, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=10, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=10, adm_len=8, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=10, adm_len=9, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| do_allowed_len_adm_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3f0 (active_len=6, ramp_len=10, adm_len=6, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x300 (active_len=2, ramp_len=10, adm_len=2, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x000 (active_len=0, ramp_len=10, adm_len=0, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x00f (active_len=4, ramp_len=10, adm_len=4, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x0ff (active_len=8, ramp_len=10, adm_len=8, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| *** Barring some ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| do_allowed_len_adm_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=9, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=8, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=7, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=6, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x158 (active_len=4, ramp_len=10, adm_len=4, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xa7 |
| (bts=0) ACC: update ACC allowed active subset 0x158 -> 0x150 (active_len=3, ramp_len=10, adm_len=3, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xaf |
| (bts=0) ACC: update ACC allowed active subset 0x150 -> 0x140 (active_len=2, ramp_len=10, adm_len=2, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x140 -> 0x100 (active_len=1, ramp_len=10, adm_len=1, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x100 -> 0x000 (active_len=0, ramp_len=10, adm_len=0, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x002 (active_len=1, ramp_len=10, adm_len=1, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| (bts=0) ACC: update ACC allowed active subset 0x002 -> 0x00a (active_len=2, ramp_len=10, adm_len=2, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf5 |
| (bts=0) ACC: update ACC allowed active subset 0x00a -> 0x01a (active_len=3, ramp_len=10, adm_len=3, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe5 |
| (bts=0) ACC: update ACC allowed active subset 0x01a -> 0x05a (active_len=4, ramp_len=10, adm_len=4, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x05a -> 0x15a (active_len=5, ramp_len=10, adm_len=5, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=6, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=7, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=8, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=9, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| do_allowed_len_adm_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=6, perm_len=5, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x140 (active_len=2, ramp_len=10, adm_len=2, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x140 -> 0x000 (active_len=0, ramp_len=10, adm_len=0, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x05a (active_len=4, ramp_len=10, adm_len=4, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x05a -> 0x15a (active_len=5, ramp_len=10, adm_len=8, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| *** Barring ALL ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=10, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| *** Barring zero ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| BTS deallocated OK in test_acc_mgr_no_ramp() |
| ===test_acc_mgr_manual_ramp=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_mgr_manual_ramp() |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3fe (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x01 |
| (bts=0) ACC: update ACC allowed active subset 0x3fe -> 0x3fc (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x03 |
| (bts=0) ACC: update ACC allowed active subset 0x3fc -> 0x3f8 (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x07 |
| (bts=0) ACC: update ACC allowed active subset 0x3f8 -> 0x3f0 (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x3e0 (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x1f |
| (bts=0) ACC: update ACC allowed active subset 0x3e0 -> 0x3c0 (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x3f |
| (bts=0) ACC: update ACC allowed active subset 0x3c0 -> 0x380 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x7f |
| (bts=0) ACC: update ACC allowed active subset 0x380 -> 0x300 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x200 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3f0 (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x300 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| *** Barring some ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x24c (active_len=4, ramp_len=10, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=9, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=8, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=7, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=6, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=5, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x248 (active_len=3, ramp_len=3, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xb7 |
| (bts=0) ACC: update ACC allowed active subset 0x248 -> 0x240 (active_len=2, ramp_len=2, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x240 -> 0x200 (active_len=1, ramp_len=1, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| (bts=0) ACC: update ACC allowed active subset 0x00c -> 0x04c (active_len=3, ramp_len=3, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb3 |
| (bts=0) ACC: update ACC allowed active subset 0x04c -> 0x24c (active_len=4, ramp_len=4, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=5, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=6, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=7, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=8, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=9, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=10, adm_len=10, perm_len=4, rotation=off) |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=6, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x240 (active_len=2, ramp_len=2, adm_len=10, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x240 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x24c (active_len=4, ramp_len=4, adm_len=10, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=8, adm_len=10, perm_len=4, rotation=off) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x24c (active_len=4, ramp_len=10, adm_len=10, perm_len=4, rotation=off) |
| *** Barring ALL ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=10, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=9, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=8, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=7, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=6, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=5, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=4, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=3, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=2, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=1, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=1, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=2, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=3, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=4, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=5, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=6, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=7, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=8, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=9, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=10, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=6, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=2, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=4, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=8, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x000 (active_len=0, ramp_len=10, adm_len=10, perm_len=0, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| *** Barring zero ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3fe (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x01 |
| (bts=0) ACC: update ACC allowed active subset 0x3fe -> 0x3fc (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x03 |
| (bts=0) ACC: update ACC allowed active subset 0x3fc -> 0x3f8 (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x07 |
| (bts=0) ACC: update ACC allowed active subset 0x3f8 -> 0x3f0 (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x3e0 (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x1f |
| (bts=0) ACC: update ACC allowed active subset 0x3e0 -> 0x3c0 (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x3f |
| (bts=0) ACC: update ACC allowed active subset 0x3c0 -> 0x380 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x7f |
| (bts=0) ACC: update ACC allowed active subset 0x380 -> 0x300 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x200 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3f0 (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x0f |
| (bts=0) ACC: update ACC allowed active subset 0x3f0 -> 0x300 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x300 -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| *** Barring some ACCs + adm len 4 *** |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3c0 (active_len=4, ramp_len=10, adm_len=4, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x3f |
| (bts=0) ACC: New ACC allowed subset 0x24c (active_len=4, ramp_len=10, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| do_allowed_len_ramp_loop(1) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x248 (active_len=3, ramp_len=3, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xb7 |
| (bts=0) ACC: update ACC allowed active subset 0x248 -> 0x240 (active_len=2, ramp_len=2, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x240 -> 0x200 (active_len=1, ramp_len=1, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xff |
| (bts=0) ACC: update ACC allowed active subset 0x200 -> 0x000 (active_len=0, ramp_len=0, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x004 (active_len=1, ramp_len=1, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| (bts=0) ACC: update ACC allowed active subset 0x00c -> 0x04c (active_len=3, ramp_len=3, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb3 |
| (bts=0) ACC: update ACC allowed active subset 0x04c -> 0x24c (active_len=4, ramp_len=4, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| do_allowed_len_ramp_loop(4) |
| (bts=0) ACC: update ACC allowed active subset 0x24c -> 0x240 (active_len=2, ramp_len=2, adm_len=4, perm_len=4, rotation=on) |
| pcu_info_update(): t2=0x01 t3=0xbf |
| (bts=0) ACC: update ACC allowed active subset 0x240 -> 0x000 (active_len=0, ramp_len=0, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x24c (active_len=4, ramp_len=4, adm_len=4, perm_len=4, rotation=off) |
| pcu_info_update(): t2=0x01 t3=0xb3 |
| BTS deallocated OK in test_acc_mgr_manual_ramp() |
| ===test_acc_mgr_rotate=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_mgr_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x1e0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x1f |
| sys={2.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1e0 -> 0x1c1 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={4.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={6.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={8.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x047 -> 0x00f (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={10.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x00f -> 0x01e (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe1 |
| sys={12.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x01e -> 0x03c (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc3 |
| sys={14.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x03c -> 0x078 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x87 |
| sys={16.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x078 -> 0x0f0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x0f |
| sys={18.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0f0 -> 0x1e0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x1f |
| sys={20.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1e0 -> 0x1c1 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={22.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={24.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={26.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x047 -> 0x00f (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={28.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x00f -> 0x01e (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe1 |
| sys={30.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x01e -> 0x03c (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc3 |
| sys={32.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x03c -> 0x078 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x87 |
| sys={34.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x078 -> 0x0f0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x0f |
| sys={36.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0f0 -> 0x1e0 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x1f |
| sys={38.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1e0 -> 0x1c1 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={40.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=10, adm_len=4, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| BTS deallocated OK in test_acc_mgr_rotate() |
| ===test_acc_ramp=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp() |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={50.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x001 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| sys={100.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x003 -> 0x007 (active_len=3, ramp_len=3, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| sys={150.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={200.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| sys={250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={300.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=7, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| sys={350.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x07f -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| sys={400.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| sys={450.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x00 t3=0x00 |
| BTS deallocated OK in test_acc_ramp() |
| ===test_acc_ramp2=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp2() |
| (bts=0) ACC: update ACC allowed active subset 0x3ff -> 0x3f8 (active_len=7, ramp_len=10, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x00 t3=0x07 |
| (bts=0) ACC: update ACC allowed active subset 0x3f8 -> 0x000 (active_len=0, ramp_len=0, adm_len=7, perm_len=10, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x007 (active_len=3, ramp_len=3, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf8 |
| sys={5.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x007 -> 0x03f (active_len=6, ramp_len=6, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={10.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x03f -> 0x07f (active_len=7, ramp_len=7, adm_len=7, perm_len=10, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| sys={15.000000}: select() |
| BTS deallocated OK in test_acc_ramp2() |
| ===test_acc_ramp3=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp3() |
| *** Barring some ACCs *** |
| (bts=0) ACC: New ACC allowed subset 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={5.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x002 -> 0x00a (active_len=2, ramp_len=2, adm_len=10, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf5 |
| sys={10.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x00a -> 0x01a (active_len=3, ramp_len=3, adm_len=10, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe5 |
| sys={15.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x01a -> 0x05a (active_len=4, ramp_len=4, adm_len=10, perm_len=5, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xa5 |
| sys={20.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x05a -> 0x15a (active_len=5, ramp_len=5, adm_len=10, perm_len=5, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0xa5 |
| sys={25.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=6, adm_len=10, perm_len=5, rotation=off) |
| sys={30.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=7, adm_len=10, perm_len=5, rotation=off) |
| sys={35.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=8, adm_len=10, perm_len=5, rotation=off) |
| sys={40.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=9, adm_len=10, perm_len=5, rotation=off) |
| sys={45.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x15a -> 0x15a (active_len=5, ramp_len=10, adm_len=10, perm_len=5, rotation=off) |
| BTS deallocated OK in test_acc_ramp3() |
| ===test_acc_ramp_up_rotate(0, 100, 100)=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_up_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={100.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={200.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={350.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={450.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x018 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={500.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x030 -> 0x070 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x8f |
| sys={600.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x070 -> 0x0e0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x1f |
| sys={700.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0e0 -> 0x1c0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3f |
| sys={750.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1c0 -> 0x1c1 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={850.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={950.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={1000.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x047 -> 0x0c7 (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x38 |
| sys={1100.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c7 -> 0x04f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb0 |
| sys={1200.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x04f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| sys={1250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={1350.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x03f -> 0x07e (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x81 |
| sys={1450.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x07e -> 0x0fc (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x03 |
| sys={1500.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0fc -> 0x1fc (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x03 |
| sys={1600.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fc -> 0x1f9 (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x06 |
| sys={1700.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1f9 -> 0x0fb (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x04 |
| sys={1750.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0fb -> 0x1fb (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x04 |
| sys={1850.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fb -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| sys={1950.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0ff -> 0x1fe (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x01 |
| sys={2000.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1fe -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| sys={2250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| sys={2500.000000}: select() |
| sys={2750.000000}: select() |
| sys={3000.000000}: select() |
| sys={3250.000000}: select() |
| BTS deallocated OK in test_acc_ramp_up_rotate() |
| ===test_acc_ramp_up_rotate(0, 20, 50)=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_up_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={100.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={200.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={350.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={450.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x018 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={500.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x030 -> 0x070 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x8f |
| sys={600.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x070 -> 0x0e0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x1f |
| sys={700.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0e0 -> 0x1c0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3f |
| sys={750.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1c0 -> 0x1c1 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={850.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={950.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={1000.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x047 -> 0x0c7 (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x38 |
| sys={1100.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c7 -> 0x04f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb0 |
| sys={1200.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x04f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| sys={1250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={1350.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x03f -> 0x07e (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x81 |
| sys={1450.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x07e -> 0x0fc (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x03 |
| sys={1500.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0fc -> 0x1fc (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x03 |
| sys={1600.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fc -> 0x1f9 (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x06 |
| sys={1700.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1f9 -> 0x0fb (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x04 |
| sys={1750.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0fb -> 0x1fb (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x04 |
| sys={1850.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fb -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| sys={1950.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0ff -> 0x1fe (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x01 |
| sys={2000.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1fe -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| sys={2250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| sys={2500.000000}: select() |
| sys={2750.000000}: select() |
| sys={3000.000000}: select() |
| sys={3250.000000}: select() |
| BTS deallocated OK in test_acc_ramp_up_rotate() |
| ===test_acc_ramp_up_rotate(70, 80, 90)=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_up_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={100.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={200.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={350.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={450.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x018 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={500.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x030 -> 0x070 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x8f |
| sys={600.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x070 -> 0x0e0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x1f |
| sys={700.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0e0 -> 0x1c0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3f |
| sys={750.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1c0 -> 0x1c1 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={850.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={950.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={1000.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x047 -> 0x0c7 (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x38 |
| sys={1100.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c7 -> 0x04f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb0 |
| sys={1200.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x04f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| sys={1250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x01f -> 0x03f (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc0 |
| sys={1350.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x03f -> 0x07e (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x81 |
| sys={1450.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x07e -> 0x0fc (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x03 |
| sys={1500.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0fc -> 0x1fc (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x03 |
| sys={1600.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fc -> 0x1f9 (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x06 |
| sys={1700.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1f9 -> 0x0fb (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x04 |
| sys={1750.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x0fb -> 0x1fb (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x04 |
| sys={1850.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fb -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| sys={1950.000000}: select() |
| (bts=0) ACC: rotate ACC allowed active subset 0x0ff -> 0x1fe (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x01 |
| sys={2000.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1fe -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| sys={2250.000000}: select() |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| sys={2500.000000}: select() |
| sys={2750.000000}: select() |
| sys={3000.000000}: select() |
| sys={3250.000000}: select() |
| BTS deallocated OK in test_acc_ramp_up_rotate() |
| ===test_acc_ramp_updown_rotate(80, 90, 0, 100, 15)=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_updown_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={100.000000}: select(0): chan_load_avg=0 |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={200.000000}: select(1): chan_load_avg=15 |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={250.000000}: select(2): chan_load_avg=30 |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={350.000000}: select(3): chan_load_avg=45 |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={450.000000}: select(4): chan_load_avg=60 |
| (bts=0) ACC: rotate ACC allowed active subset 0x018 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={500.000000}: select(5): chan_load_avg=75 |
| (bts=0) ACC: update ACC allowed active subset 0x030 -> 0x070 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x8f |
| sys={600.000000}: select(6): chan_load_avg=90 |
| (bts=0) ACC: rotate ACC allowed active subset 0x070 -> 0x0e0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x1f |
| sys={700.000000}: select(7): chan_load_avg=100 |
| (bts=0) ACC: rotate ACC allowed active subset 0x0e0 -> 0x1c0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3f |
| sys={750.000000}: select(8): chan_load_avg=85 |
| sys={850.000000}: select(9): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c0 -> 0x181 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x7e |
| sys={950.000000}: select(10): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x181 -> 0x083 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x7c |
| sys={1000.000000}: select(11): chan_load_avg=40 |
| (bts=0) ACC: update ACC allowed active subset 0x083 -> 0x183 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x7c |
| sys={1100.000000}: select(12): chan_load_avg=25 |
| (bts=0) ACC: rotate ACC allowed active subset 0x183 -> 0x087 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x78 |
| sys={1200.000000}: select(13): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x087 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={1250.000000}: select(14): chan_load_avg=0 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x01f (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe0 |
| sys={1350.000000}: select(15): chan_load_avg=15 |
| (bts=0) ACC: rotate ACC allowed active subset 0x01f -> 0x03e (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc1 |
| sys={1450.000000}: select(16): chan_load_avg=30 |
| (bts=0) ACC: rotate ACC allowed active subset 0x03e -> 0x07c (active_len=5, ramp_len=5, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x83 |
| sys={1500.000000}: select(17): chan_load_avg=45 |
| (bts=0) ACC: update ACC allowed active subset 0x07c -> 0x0fc (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x03 |
| sys={1600.000000}: select(18): chan_load_avg=60 |
| (bts=0) ACC: rotate ACC allowed active subset 0x0fc -> 0x1f8 (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x07 |
| sys={1700.000000}: select(19): chan_load_avg=75 |
| (bts=0) ACC: rotate ACC allowed active subset 0x1f8 -> 0x1f1 (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x0e |
| sys={1750.000000}: select(20): chan_load_avg=90 |
| sys={1850.000000}: select(21): chan_load_avg=100 |
| (bts=0) ACC: rotate ACC allowed active subset 0x1f1 -> 0x0f3 (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x0c |
| sys={1950.000000}: select(22): chan_load_avg=85 |
| (bts=0) ACC: rotate ACC allowed active subset 0x0f3 -> 0x077 (active_len=6, ramp_len=6, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x88 |
| sys={2000.000000}: select(23): chan_load_avg=70 |
| (bts=0) ACC: update ACC allowed active subset 0x077 -> 0x0f7 (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x08 |
| sys={2100.000000}: select(24): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x0f7 -> 0x07f (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x80 |
| sys={2200.000000}: select(25): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x07f -> 0x0fe (active_len=7, ramp_len=7, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x01 |
| sys={2250.000000}: select(26): chan_load_avg=25 |
| (bts=0) ACC: update ACC allowed active subset 0x0fe -> 0x1fe (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x01 |
| sys={2350.000000}: select(27): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fe -> 0x1fd (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x02 |
| sys={2450.000000}: select(28): chan_load_avg=0 |
| (bts=0) ACC: rotate ACC allowed active subset 0x1fd -> 0x0ff (active_len=8, ramp_len=8, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x00 |
| sys={2500.000000}: select(29): chan_load_avg=15 |
| (bts=0) ACC: update ACC allowed active subset 0x0ff -> 0x1ff (active_len=9, ramp_len=9, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| sys={2750.000000}: select(30): chan_load_avg=30 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| sys={3000.000000}: select(31): chan_load_avg=45 |
| sys={3250.000000}: select(32): chan_load_avg=60 |
| sys={3500.000000}: select(33): chan_load_avg=75 |
| sys={3750.000000}: select(34): chan_load_avg=90 |
| sys={4000.000000}: select(35): chan_load_avg=100 |
| sys={4250.000000}: select(36): chan_load_avg=85 |
| sys={4500.000000}: select(37): chan_load_avg=70 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| sys={4750.000000}: select(38): chan_load_avg=55 |
| sys={5000.000000}: select(39): chan_load_avg=40 |
| sys={5250.000000}: select(40): chan_load_avg=25 |
| sys={5500.000000}: select(41): chan_load_avg=10 |
| sys={5750.000000}: select(42): chan_load_avg=0 |
| sys={6000.000000}: select(43): chan_load_avg=15 |
| sys={6250.000000}: select(44): chan_load_avg=30 |
| sys={6500.000000}: select(45): chan_load_avg=45 |
| sys={6750.000000}: select(46): chan_load_avg=60 |
| sys={7000.000000}: select(47): chan_load_avg=75 |
| sys={7250.000000}: select(48): chan_load_avg=90 |
| sys={7500.000000}: select(49): chan_load_avg=100 |
| BTS deallocated OK in test_acc_ramp_updown_rotate() |
| ===test_acc_ramp_updown_rotate(30, 50, 10, 100, 15)=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_updown_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={100.000000}: select(0): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={200.000000}: select(1): chan_load_avg=25 |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={250.000000}: select(2): chan_load_avg=40 |
| sys={350.000000}: select(3): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x004 -> 0x008 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf7 |
| sys={450.000000}: select(4): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x008 -> 0x010 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xef |
| sys={500.000000}: select(5): chan_load_avg=85 |
| sys={600.000000}: select(6): chan_load_avg=100 |
| (bts=0) ACC: rotate ACC allowed active subset 0x010 -> 0x020 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xdf |
| sys={700.000000}: select(7): chan_load_avg=85 |
| (bts=0) ACC: rotate ACC allowed active subset 0x020 -> 0x040 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xbf |
| sys={750.000000}: select(8): chan_load_avg=70 |
| sys={850.000000}: select(9): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x040 -> 0x080 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x7f |
| sys={950.000000}: select(10): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x080 -> 0x100 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xff |
| sys={1000.000000}: select(11): chan_load_avg=25 |
| (bts=0) ACC: update ACC allowed active subset 0x100 -> 0x101 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xfe |
| sys={1100.000000}: select(12): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x101 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| sys={1200.000000}: select(13): chan_load_avg=25 |
| (bts=0) ACC: rotate ACC allowed active subset 0x003 -> 0x006 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf9 |
| sys={1250.000000}: select(14): chan_load_avg=40 |
| sys={1350.000000}: select(15): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x006 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={1450.000000}: select(16): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={1500.000000}: select(17): chan_load_avg=85 |
| (bts=0) ACC: update ACC allowed active subset 0x018 -> 0x010 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xef |
| sys={1600.000000}: select(18): chan_load_avg=100 |
| (bts=0) ACC: rotate ACC allowed active subset 0x010 -> 0x020 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xdf |
| sys={1700.000000}: select(19): chan_load_avg=85 |
| (bts=0) ACC: rotate ACC allowed active subset 0x020 -> 0x040 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xbf |
| sys={1750.000000}: select(20): chan_load_avg=70 |
| sys={1850.000000}: select(21): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x040 -> 0x080 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x7f |
| sys={1950.000000}: select(22): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x080 -> 0x100 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xff |
| sys={2000.000000}: select(23): chan_load_avg=25 |
| (bts=0) ACC: update ACC allowed active subset 0x100 -> 0x101 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xfe |
| sys={2100.000000}: select(24): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x101 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| sys={2200.000000}: select(25): chan_load_avg=25 |
| (bts=0) ACC: rotate ACC allowed active subset 0x003 -> 0x006 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf9 |
| sys={2250.000000}: select(26): chan_load_avg=40 |
| sys={2350.000000}: select(27): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x006 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={2450.000000}: select(28): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={2500.000000}: select(29): chan_load_avg=85 |
| (bts=0) ACC: update ACC allowed active subset 0x018 -> 0x010 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xef |
| sys={2600.000000}: select(30): chan_load_avg=100 |
| (bts=0) ACC: rotate ACC allowed active subset 0x010 -> 0x020 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xdf |
| sys={2700.000000}: select(31): chan_load_avg=85 |
| (bts=0) ACC: rotate ACC allowed active subset 0x020 -> 0x040 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xbf |
| sys={2750.000000}: select(32): chan_load_avg=70 |
| sys={2850.000000}: select(33): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x040 -> 0x080 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x7f |
| sys={2950.000000}: select(34): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x080 -> 0x100 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xff |
| sys={3000.000000}: select(35): chan_load_avg=25 |
| (bts=0) ACC: update ACC allowed active subset 0x100 -> 0x101 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xfe |
| sys={3100.000000}: select(36): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x101 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| sys={3200.000000}: select(37): chan_load_avg=25 |
| (bts=0) ACC: rotate ACC allowed active subset 0x003 -> 0x006 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf9 |
| sys={3250.000000}: select(38): chan_load_avg=40 |
| sys={3350.000000}: select(39): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x006 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={3450.000000}: select(40): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={3500.000000}: select(41): chan_load_avg=85 |
| (bts=0) ACC: update ACC allowed active subset 0x018 -> 0x010 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xef |
| sys={3600.000000}: select(42): chan_load_avg=100 |
| (bts=0) ACC: rotate ACC allowed active subset 0x010 -> 0x020 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xdf |
| sys={3700.000000}: select(43): chan_load_avg=85 |
| (bts=0) ACC: rotate ACC allowed active subset 0x020 -> 0x040 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xbf |
| sys={3750.000000}: select(44): chan_load_avg=70 |
| sys={3850.000000}: select(45): chan_load_avg=55 |
| (bts=0) ACC: rotate ACC allowed active subset 0x040 -> 0x080 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x7f |
| sys={3950.000000}: select(46): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x080 -> 0x100 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xff |
| sys={4000.000000}: select(47): chan_load_avg=25 |
| (bts=0) ACC: update ACC allowed active subset 0x100 -> 0x101 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xfe |
| sys={4100.000000}: select(48): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x101 -> 0x003 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfc |
| sys={4200.000000}: select(49): chan_load_avg=25 |
| (bts=0) ACC: rotate ACC allowed active subset 0x003 -> 0x006 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf9 |
| BTS deallocated OK in test_acc_ramp_updown_rotate() |
| ===test_acc_ramp_updown_rotate(50, 49, 0, 100, 10)=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_updown_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| (bts=0) ACC: New ACC allowed subset 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={100.000000}: select(0): chan_load_avg=0 |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={200.000000}: select(1): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={250.000000}: select(2): chan_load_avg=20 |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={350.000000}: select(3): chan_load_avg=30 |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={450.000000}: select(4): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x018 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={500.000000}: select(5): chan_load_avg=50 |
| (bts=0) ACC: update ACC allowed active subset 0x030 -> 0x020 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xdf |
| sys={600.000000}: select(6): chan_load_avg=60 |
| (bts=0) ACC: rotate ACC allowed active subset 0x020 -> 0x040 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xbf |
| sys={700.000000}: select(7): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x040 -> 0x080 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x7f |
| sys={750.000000}: select(8): chan_load_avg=80 |
| sys={850.000000}: select(9): chan_load_avg=90 |
| (bts=0) ACC: rotate ACC allowed active subset 0x080 -> 0x100 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xff |
| sys={950.000000}: select(10): chan_load_avg=100 |
| (bts=0) ACC: rotate ACC allowed active subset 0x100 -> 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={1000.000000}: select(11): chan_load_avg=90 |
| sys={1100.000000}: select(12): chan_load_avg=80 |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={1200.000000}: select(13): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={1250.000000}: select(14): chan_load_avg=60 |
| sys={1350.000000}: select(15): chan_load_avg=50 |
| (bts=0) ACC: rotate ACC allowed active subset 0x004 -> 0x008 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf7 |
| sys={1450.000000}: select(16): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x008 -> 0x010 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xef |
| sys={1500.000000}: select(17): chan_load_avg=30 |
| (bts=0) ACC: update ACC allowed active subset 0x010 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={1600.000000}: select(18): chan_load_avg=20 |
| (bts=0) ACC: rotate ACC allowed active subset 0x030 -> 0x060 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x9f |
| sys={1700.000000}: select(19): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x060 -> 0x0c0 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3f |
| sys={1750.000000}: select(20): chan_load_avg=0 |
| (bts=0) ACC: update ACC allowed active subset 0x0c0 -> 0x1c0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3f |
| sys={1850.000000}: select(21): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c0 -> 0x181 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x7e |
| sys={1950.000000}: select(22): chan_load_avg=20 |
| (bts=0) ACC: rotate ACC allowed active subset 0x181 -> 0x083 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x7c |
| sys={2000.000000}: select(23): chan_load_avg=30 |
| (bts=0) ACC: update ACC allowed active subset 0x083 -> 0x183 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x7c |
| sys={2100.000000}: select(24): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x183 -> 0x087 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x78 |
| sys={2200.000000}: select(25): chan_load_avg=50 |
| (bts=0) ACC: rotate ACC allowed active subset 0x087 -> 0x00f (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf0 |
| sys={2250.000000}: select(26): chan_load_avg=60 |
| (bts=0) ACC: update ACC allowed active subset 0x00f -> 0x00e (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf1 |
| sys={2350.000000}: select(27): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x00e -> 0x01c (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe3 |
| sys={2450.000000}: select(28): chan_load_avg=80 |
| (bts=0) ACC: rotate ACC allowed active subset 0x01c -> 0x038 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xc7 |
| sys={2500.000000}: select(29): chan_load_avg=90 |
| (bts=0) ACC: update ACC allowed active subset 0x038 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={2600.000000}: select(30): chan_load_avg=100 |
| (bts=0) ACC: rotate ACC allowed active subset 0x030 -> 0x060 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x9f |
| sys={2700.000000}: select(31): chan_load_avg=90 |
| (bts=0) ACC: rotate ACC allowed active subset 0x060 -> 0x0c0 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3f |
| sys={2750.000000}: select(32): chan_load_avg=80 |
| (bts=0) ACC: update ACC allowed active subset 0x0c0 -> 0x080 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x7f |
| sys={2850.000000}: select(33): chan_load_avg=70 |
| (bts=0) ACC: rotate ACC allowed active subset 0x080 -> 0x100 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0xff |
| sys={2950.000000}: select(34): chan_load_avg=60 |
| (bts=0) ACC: rotate ACC allowed active subset 0x100 -> 0x001 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfe |
| sys={3000.000000}: select(35): chan_load_avg=50 |
| sys={3100.000000}: select(36): chan_load_avg=40 |
| (bts=0) ACC: rotate ACC allowed active subset 0x001 -> 0x002 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfd |
| sys={3200.000000}: select(37): chan_load_avg=30 |
| (bts=0) ACC: rotate ACC allowed active subset 0x002 -> 0x004 (active_len=1, ramp_len=1, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xfb |
| sys={3250.000000}: select(38): chan_load_avg=20 |
| (bts=0) ACC: update ACC allowed active subset 0x004 -> 0x00c (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf3 |
| sys={3350.000000}: select(39): chan_load_avg=10 |
| (bts=0) ACC: rotate ACC allowed active subset 0x00c -> 0x018 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe7 |
| sys={3450.000000}: select(40): chan_load_avg=0 |
| (bts=0) ACC: rotate ACC allowed active subset 0x018 -> 0x030 (active_len=2, ramp_len=2, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xcf |
| sys={3500.000000}: select(41): chan_load_avg=10 |
| (bts=0) ACC: update ACC allowed active subset 0x030 -> 0x070 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x8f |
| sys={3600.000000}: select(42): chan_load_avg=20 |
| (bts=0) ACC: rotate ACC allowed active subset 0x070 -> 0x0e0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x1f |
| sys={3700.000000}: select(43): chan_load_avg=30 |
| (bts=0) ACC: rotate ACC allowed active subset 0x0e0 -> 0x1c0 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3f |
| sys={3750.000000}: select(44): chan_load_avg=40 |
| (bts=0) ACC: update ACC allowed active subset 0x1c0 -> 0x1c1 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x02 t3=0x3e |
| sys={3850.000000}: select(45): chan_load_avg=50 |
| (bts=0) ACC: rotate ACC allowed active subset 0x1c1 -> 0x0c3 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0x3c |
| sys={3950.000000}: select(46): chan_load_avg=60 |
| (bts=0) ACC: rotate ACC allowed active subset 0x0c3 -> 0x047 (active_len=4, ramp_len=4, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb8 |
| sys={4000.000000}: select(47): chan_load_avg=70 |
| (bts=0) ACC: update ACC allowed active subset 0x047 -> 0x046 (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xb9 |
| sys={4100.000000}: select(48): chan_load_avg=80 |
| (bts=0) ACC: rotate ACC allowed active subset 0x046 -> 0x00e (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xf1 |
| sys={4200.000000}: select(49): chan_load_avg=90 |
| (bts=0) ACC: rotate ACC allowed active subset 0x00e -> 0x01c (active_len=3, ramp_len=3, adm_len=10, perm_len=9, rotation=on) |
| pcu_info_update(): t2=0x03 t3=0xe3 |
| BTS deallocated OK in test_acc_ramp_updown_rotate() |
| ===test_acc_ramp_updown_rotate(30, 80, 30, 80, 5)=== |
| (bts=0) ACC: New ACC allowed subset 0x3ff (active_len=10, ramp_len=10, adm_len=10, perm_len=10, rotation=off) |
| BTS allocation OK in test_acc_ramp_updown_rotate() |
| *** Barring one ACC *** |
| (bts=0) ACC: New ACC allowed subset 0x1ff (active_len=9, ramp_len=10, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x02 t3=0x00 |
| (bts=0) ACC: update ACC allowed active subset 0x1ff -> 0x000 (active_len=0, ramp_len=0, adm_len=10, perm_len=9, rotation=off) |
| pcu_info_update(): t2=0x03 t3=0xff |
| sys={250.000000}: select(0): chan_load_avg=30 |
| sys={500.000000}: select(1): chan_load_avg=35 |
| sys={750.000000}: select(2): chan_load_avg=40 |
| sys={1000.000000}: select(3): chan_load_avg=45 |
| sys={1250.000000}: select(4): chan_load_avg=50 |
| sys={1500.000000}: select(5): chan_load_avg=55 |
| sys={1750.000000}: select(6): chan_load_avg=60 |
| sys={2000.000000}: select(7): chan_load_avg=65 |
| sys={2250.000000}: select(8): chan_load_avg=70 |
| sys={2500.000000}: select(9): chan_load_avg=75 |
| sys={2750.000000}: select(10): chan_load_avg=80 |
| sys={3000.000000}: select(11): chan_load_avg=75 |
| sys={3250.000000}: select(12): chan_load_avg=70 |
| sys={3500.000000}: select(13): chan_load_avg=65 |
| sys={3750.000000}: select(14): chan_load_avg=60 |
| sys={4000.000000}: select(15): chan_load_avg=55 |
| sys={4250.000000}: select(16): chan_load_avg=50 |
| sys={4500.000000}: select(17): chan_load_avg=45 |
| sys={4750.000000}: select(18): chan_load_avg=40 |
| sys={5000.000000}: select(19): chan_load_avg=35 |
| sys={5250.000000}: select(20): chan_load_avg=30 |
| sys={5500.000000}: select(21): chan_load_avg=35 |
| sys={5750.000000}: select(22): chan_load_avg=40 |
| sys={6000.000000}: select(23): chan_load_avg=45 |
| sys={6250.000000}: select(24): chan_load_avg=50 |
| sys={6500.000000}: select(25): chan_load_avg=55 |
| sys={6750.000000}: select(26): chan_load_avg=60 |
| sys={7000.000000}: select(27): chan_load_avg=65 |
| sys={7250.000000}: select(28): chan_load_avg=70 |
| sys={7500.000000}: select(29): chan_load_avg=75 |
| sys={7750.000000}: select(30): chan_load_avg=80 |
| sys={8000.000000}: select(31): chan_load_avg=75 |
| sys={8250.000000}: select(32): chan_load_avg=70 |
| sys={8500.000000}: select(33): chan_load_avg=65 |
| sys={8750.000000}: select(34): chan_load_avg=60 |
| sys={9000.000000}: select(35): chan_load_avg=55 |
| sys={9250.000000}: select(36): chan_load_avg=50 |
| sys={9500.000000}: select(37): chan_load_avg=45 |
| sys={9750.000000}: select(38): chan_load_avg=40 |
| sys={10000.000000}: select(39): chan_load_avg=35 |
| sys={10250.000000}: select(40): chan_load_avg=30 |
| sys={10500.000000}: select(41): chan_load_avg=35 |
| sys={10750.000000}: select(42): chan_load_avg=40 |
| sys={11000.000000}: select(43): chan_load_avg=45 |
| sys={11250.000000}: select(44): chan_load_avg=50 |
| sys={11500.000000}: select(45): chan_load_avg=55 |
| sys={11750.000000}: select(46): chan_load_avg=60 |
| sys={12000.000000}: select(47): chan_load_avg=65 |
| sys={12250.000000}: select(48): chan_load_avg=70 |
| sys={12500.000000}: select(49): chan_load_avg=75 |
| BTS deallocated OK in test_acc_ramp_updown_rotate() |