| <vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> |
| <node id='_common_cmds_'> |
| <name>Common Commands</name> |
| <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description> |
| <command id='help'> |
| <params> |
| <param name='help' doc='Description of the interactive help system' /> |
| </params> |
| </command> |
| <command id='list'> |
| <params> |
| <param name='list' doc='Print command list' /> |
| </params> |
| </command> |
| <command id='write terminal'> |
| <params> |
| <param name='write' doc='Write running configuration to memory, network, or terminal' /> |
| <param name='terminal' doc='Write to terminal' /> |
| </params> |
| </command> |
| <command id='write file'> |
| <params> |
| <param name='write' doc='Write running configuration to memory, network, or terminal' /> |
| <param name='file' doc='Write to configuration file' /> |
| </params> |
| </command> |
| <command id='write memory'> |
| <params> |
| <param name='write' doc='Write running configuration to memory, network, or terminal' /> |
| <param name='memory' doc='Write configuration to the file (same as write file)' /> |
| </params> |
| </command> |
| <command id='write'> |
| <params> |
| <param name='write' doc='Write running configuration to memory, network, or terminal' /> |
| </params> |
| </command> |
| <command id='show running-config'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='running-config' doc='running configuration' /> |
| </params> |
| </command> |
| <command id='exit'> |
| <params> |
| <param name='exit' doc='Exit current mode and down to previous mode' /> |
| </params> |
| </command> |
| <command id='end'> |
| <params> |
| <param name='end' doc='End current mode and change to enable mode.' /> |
| </params> |
| </command> |
| </node> |
| <node id='view'> |
| <name>view</name> |
| <command id='show version'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='version' doc='Displays program version' /> |
| </params> |
| </command> |
| <command id='show online-help'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='online-help' doc='Online help' /> |
| </params> |
| </command> |
| <command id='enable'> |
| <params> |
| <param name='enable' doc='Turn on privileged mode command' /> |
| </params> |
| </command> |
| <command id='terminal length <0-512>'> |
| <params> |
| <param name='terminal' doc='Set terminal line parameters' /> |
| <param name='length' doc='Set number of lines on a screen' /> |
| <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> |
| </params> |
| </command> |
| <command id='terminal no length'> |
| <params> |
| <param name='terminal' doc='Set terminal line parameters' /> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='length' doc='Set number of lines on a screen' /> |
| </params> |
| </command> |
| <command id='who'> |
| <params> |
| <param name='who' doc='Display who is on vty' /> |
| </params> |
| </command> |
| <command id='show history'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='history' doc='Display the session command history' /> |
| </params> |
| </command> |
| <command id='show stats'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='stats' doc='Show statistical values' /> |
| </params> |
| </command> |
| <command id='show stats level (global|peer|subscriber)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='stats' doc='Show statistical values' /> |
| <param name='level' doc='Set the maximum group level' /> |
| <param name='global' doc='Show global groups only' /> |
| <param name='peer' doc='Show global and network peer related groups' /> |
| <param name='subscriber' doc='Show global, peer, and subscriber groups' /> |
| </params> |
| </command> |
| <command id='show asciidoc counters'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='asciidoc' doc='Asciidoc generation' /> |
| <param name='counters' doc='Generate table of all registered counters' /> |
| </params> |
| </command> |
| <command id='show rate-counters'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='rate-counters' doc='Show all rate counters' /> |
| </params> |
| </command> |
| <command id='show network'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='network' doc='Display information about a GSM NETWORK' /> |
| </params> |
| </command> |
| <command id='show bts [<0-255>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='bts' doc='Display information about a BTS' /> |
| <param name='[<0-255>]' doc='BTS number' /> |
| </params> |
| </command> |
| <command id='show rejected-bts'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='rejected-bts' doc='Display recently rejected BTS devices' /> |
| </params> |
| </command> |
| <command id='show trx [<0-255>] [<0-255>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='trx' doc='Display information about a TRX' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| </params> |
| </command> |
| <command id='show trx (connected|disconnected)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='trx' doc='Display information about a TRX' /> |
| <param name='connected' doc='Show TRX with RSL connected' /> |
| <param name='disconnected' doc='Show TRX with RSL disconnected' /> |
| </params> |
| </command> |
| <command id='show timeslot [<0-255>] [<0-255>] [<0-7>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='timeslot' doc='Display information about a TS' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| <param name='[<0-7>]' doc='Timeslot Number' /> |
| </params> |
| </command> |
| <command id='show lchan [<0-255>] [<0-255>] [<0-7>] [<0-7>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='lchan' doc='Display information about a logical channel' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| <param name='[<0-7>]' doc='Timeslot Number' /> |
| <param name='[<0-7>]' doc='Logical Channel Number' /> |
| </params> |
| </command> |
| <command id='show lchan summary [<0-255>] [<0-255>] [<0-7>] [<0-7>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='lchan' doc='Display information about a logical channel' /> |
| <param name='summary' doc='Short summary (used lchans)' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| <param name='[<0-7>]' doc='Timeslot Number' /> |
| <param name='[<0-7>]' doc='Logical Channel Number' /> |
| </params> |
| </command> |
| <command id='show lchan summary-all [<0-255>] [<0-255>] [<0-7>] [<0-7>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='lchan' doc='Display information about a logical channel' /> |
| <param name='summary-all' doc='Short summary (all lchans)' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| <param name='[<0-7>]' doc='Timeslot Number' /> |
| <param name='[<0-7>]' doc='Logical Channel Number' /> |
| </params> |
| </command> |
| <command id='show timer [TNNNN]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='timer' doc='Show timers' /> |
| <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' /> |
| </params> |
| </command> |
| <command id='show conns'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='conns' doc='Display currently active subscriber connections' /> |
| </params> |
| </command> |
| <command id='show paging [<0-255>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='paging' doc='Display information about paging requests of a BTS' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| </params> |
| </command> |
| <command id='show paging-group <0-255> IMSI'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='paging-group' doc='Display the paging group' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='IMSI' doc='IMSI' /> |
| </params> |
| </command> |
| <command id='logging enable'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='enable' doc='Enables logging to this vty' /> |
| </params> |
| </command> |
| <command id='logging disable'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='disable' doc='Disables logging to this vty' /> |
| </params> |
| </command> |
| <command id='logging filter all (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='filter' doc='Filter log messages' /> |
| <param name='all' doc='Do you want to log all messages?' /> |
| <param name='0' doc='Only print messages matched by other filters' /> |
| <param name='1' doc='Bypass filter and print all messages' /> |
| </params> |
| </command> |
| <command id='logging color (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='color' doc='Configure color-printing for log messages' /> |
| <param name='0' doc='Don't use color for printing messages' /> |
| <param name='1' doc='Use color for printing messages' /> |
| </params> |
| </command> |
| <command id='logging timestamp (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='timestamp' doc='Configure log message timestamping' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with current timestamp' /> |
| </params> |
| </command> |
| <command id='logging print extended-timestamp (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='extended-timestamp' doc='Configure log message timestamping' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> |
| </params> |
| </command> |
| <command id='logging print category (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='category' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with category/subsystem name' /> |
| </params> |
| </command> |
| <command id='logging print category-hex (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='category-hex' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> |
| </params> |
| </command> |
| <command id='logging print level (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='level' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with the log level name' /> |
| </params> |
| </command> |
| <command id='logging print file (0|1|basename) [last]'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='file' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with the source file and line' /> |
| <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> |
| <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> |
| </params> |
| </command> |
| <command id='logging set-log-mask MASK'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='set-log-mask' doc='Set the logmask of this logging target' /> |
| <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> |
| </params> |
| </command> |
| <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> |
| <param name='mm' doc='Layer3 Mobility Management (MM)' /> |
| <param name='rr' doc='Layer3 Radio Resource (RR)' /> |
| <param name='rsl' doc='A-bis Radio Signalling Link (RSL)' /> |
| <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> |
| <param name='pag' doc='Paging Subsystem' /> |
| <param name='meas' doc='Radio Measurement Processing' /> |
| <param name='msc' doc='Mobile Switching Center' /> |
| <param name='ho' doc='Hand-Over Process' /> |
| <param name='hodec' doc='Hand-Over Decision' /> |
| <param name='ref' doc='Reference Counting' /> |
| <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> |
| <param name='ctrl' doc='Control interface' /> |
| <param name='filter' doc='BSC/NAT IMSI based filtering' /> |
| <param name='pcu' doc='PCU Interface' /> |
| <param name='lcls' doc='Local Call, Local Switch' /> |
| <param name='chan' doc='lchan FSM' /> |
| <param name='ts' doc='timeslot FSM' /> |
| <param name='as' doc='assignment FSM' /> |
| <param name='lglobal' doc='Library-internal global log family' /> |
| <param name='llapd' doc='LAPD in libosmogsm' /> |
| <param name='linp' doc='A-bis Intput Subsystem' /> |
| <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> |
| <param name='lmi' doc='A-bis Input Driver for Signalling' /> |
| <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> |
| <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> |
| <param name='lctrl' doc='Control Interface' /> |
| <param name='lgtp' doc='GPRS GTP library' /> |
| <param name='lstats' doc='Statistics messages and logging' /> |
| <param name='lgsup' doc='Generic Subscriber Update Protocol' /> |
| <param name='loap' doc='Osmocom Authentication Protocol' /> |
| <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> |
| <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> |
| <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> |
| <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> |
| <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> |
| <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> |
| <param name='lrspro' doc='Remote SIM protocol' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='logging level set-all (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='logging level force-all (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='no logging level force-all'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> |
| </params> |
| </command> |
| <command id='show logging vty'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='logging' doc='Show current logging configuration' /> |
| <param name='vty' doc='Show current logging configuration for this vty' /> |
| </params> |
| </command> |
| <command id='show alarms'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='alarms' doc='Show current logging configuration' /> |
| </params> |
| </command> |
| <command id='show talloc-context (application|all) (full|brief|DEPTH)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='talloc-context' doc='Show talloc memory hierarchy' /> |
| <param name='application' doc='Application's context' /> |
| <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> |
| <param name='full' doc='Display a full talloc memory hierarchy' /> |
| <param name='brief' doc='Display a brief talloc memory hierarchy' /> |
| <param name='DEPTH' doc='Specify required maximal depth value' /> |
| </params> |
| </command> |
| <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='talloc-context' doc='Show talloc memory hierarchy' /> |
| <param name='application' doc='Application's context' /> |
| <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> |
| <param name='full' doc='Display a full talloc memory hierarchy' /> |
| <param name='brief' doc='Display a brief talloc memory hierarchy' /> |
| <param name='DEPTH' doc='Specify required maximal depth value' /> |
| <param name='tree' doc='Display only a specific memory chunk' /> |
| <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' /> |
| </params> |
| </command> |
| <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='talloc-context' doc='Show talloc memory hierarchy' /> |
| <param name='application' doc='Application's context' /> |
| <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> |
| <param name='full' doc='Display a full talloc memory hierarchy' /> |
| <param name='brief' doc='Display a brief talloc memory hierarchy' /> |
| <param name='DEPTH' doc='Specify required maximal depth value' /> |
| <param name='filter' doc='Filter chunks using regular expression' /> |
| <param name='REGEXP' doc='Regular expression' /> |
| </params> |
| </command> |
| <command id='show bts <0-255> neighbor arfcn <0-1023> bsic (<0-63>|any)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='bts' doc='Display information about a BTS' /> |
| <param name='<0-255>' doc='BTS number' /> |
| <param name='neighbor' doc='Query which cell would be the target for this neighbor ARFCN+BSIC' /> |
| <param name='arfcn' doc='ARFCN of neighbor cell' /> |
| <param name='<0-1023>' doc='ARFCN value' /> |
| <param name='bsic' doc='BSIC of neighbor cell' /> |
| <param name='<0-63>' doc='BSIC value' /> |
| <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /> |
| </params> |
| </command> |
| <command id='show e1_driver'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='e1_driver' doc='Display information about available E1 drivers' /> |
| </params> |
| </command> |
| <command id='show e1_line [line_nr] [stats]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='e1_line' doc='Display information about a E1 line' /> |
| <param name='[line_nr]' doc='E1 Line Number' /> |
| <param name='[stats]' doc='Include statistics' /> |
| </params> |
| </command> |
| <command id='show e1_timeslot [line_nr] [ts_nr]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='e1_timeslot' doc='Display information about a E1 timeslot' /> |
| <param name='[line_nr]' doc='E1 Line Number' /> |
| <param name='[ts_nr]' doc='E1 Timeslot Number' /> |
| </params> |
| </command> |
| <command id='show fsm NAME'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='fsm' doc='Show information about finite state machines' /> |
| <param name='NAME' doc='Display information about a single named finite state machine' /> |
| </params> |
| </command> |
| <command id='show fsm all'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='fsm' doc='Show information about finite state machines' /> |
| <param name='all' doc='Display a list of all registered finite state machines' /> |
| </params> |
| </command> |
| <command id='show fsm-instances NAME'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='fsm-instances' doc='Show information about finite state machine instances' /> |
| <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' /> |
| </params> |
| </command> |
| <command id='show fsm-instances all'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='fsm-instances' doc='Show information about finite state machine instances' /> |
| <param name='all' doc='Display a list of all FSM instances of all finite state machine' /> |
| </params> |
| </command> |
| <command id='show statistics'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='statistics' doc='Statistics about the BSC' /> |
| </params> |
| </command> |
| <command id='show mscs'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='mscs' doc='MSC Connections and State' /> |
| </params> |
| </command> |
| <command id='show position'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='position' doc='Position information of the BTS' /> |
| </params> |
| </command> |
| <command id='logging filter imsi IMSI'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='filter' doc='Filter log messages' /> |
| <param name='imsi' doc='Filter log messages by IMSI' /> |
| <param name='IMSI' doc='IMSI to be used as filter' /> |
| </params> |
| </command> |
| <command id='show subscriber all'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='subscriber' doc='Display information about subscribers' /> |
| <param name='all' doc='All Subscribers' /> |
| </params> |
| </command> |
| <command id='show access-list NAME'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='access-list' doc='IMSI access list' /> |
| <param name='NAME' doc='Name of the access list' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> users'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='users' doc='User Table' /> |
| </params> |
| </command> |
| <command id='show cs7 (sua|m3ua|ipa) [<0-65534>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='sua' doc='SCCP User Adaptation' /> |
| <param name='m3ua' doc='MTP3 User Adaptation' /> |
| <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> |
| <param name='[<0-65534>]' doc='Port Number' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> asp'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='asp' doc='Application Server Process (ASP)' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='as' doc='Application Server (AS)' /> |
| <param name='active' doc='Display all active ASs' /> |
| <param name='all' doc='Display all ASs (default)' /> |
| <param name='m3ua' doc='Display all m3ua ASs' /> |
| <param name='sua' doc='Display all SUA ASs' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp addressbook'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='addressbook' doc='List all SCCP addressbook entries' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp users'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='users' doc='Show List of SCCP Users registered' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp ssn <0-65535>'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='ssn' doc='Find an SCCP User registered for the given SSN' /> |
| <param name='<0-65535>' doc='Subsystem Number (SSN)' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp connections'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='connections' doc='Show List of active SCCP connections' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp timers'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signaling Connection Control Part' /> |
| <param name='timers' doc='Show List of SCCP timers' /> |
| </params> |
| </command> |
| </node> |
| <node id='enable'> |
| <name>enable</name> |
| <command id='disable'> |
| <params> |
| <param name='disable' doc='Turn off privileged mode command' /> |
| </params> |
| </command> |
| <command id='configure terminal'> |
| <params> |
| <param name='configure' doc='Configuration from vty interface' /> |
| <param name='terminal' doc='Configuration terminal' /> |
| </params> |
| </command> |
| <command id='copy running-config startup-config'> |
| <params> |
| <param name='copy' doc='Copy configuration' /> |
| <param name='running-config' doc='Copy running config to... ' /> |
| <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> |
| </params> |
| </command> |
| <command id='show startup-config'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='startup-config' doc='Contentes of startup configuration' /> |
| </params> |
| </command> |
| <command id='show version'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='version' doc='Displays program version' /> |
| </params> |
| </command> |
| <command id='show online-help'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='online-help' doc='Online help' /> |
| </params> |
| </command> |
| <command id='terminal length <0-512>'> |
| <params> |
| <param name='terminal' doc='Set terminal line parameters' /> |
| <param name='length' doc='Set number of lines on a screen' /> |
| <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> |
| </params> |
| </command> |
| <command id='terminal no length'> |
| <params> |
| <param name='terminal' doc='Set terminal line parameters' /> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='length' doc='Set number of lines on a screen' /> |
| </params> |
| </command> |
| <command id='who'> |
| <params> |
| <param name='who' doc='Display who is on vty' /> |
| </params> |
| </command> |
| <command id='show history'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='history' doc='Display the session command history' /> |
| </params> |
| </command> |
| <command id='terminal monitor'> |
| <params> |
| <param name='terminal' doc='Set terminal line parameters' /> |
| <param name='monitor' doc='Copy debug output to the current terminal line' /> |
| </params> |
| </command> |
| <command id='terminal no monitor'> |
| <params> |
| <param name='terminal' doc='Set terminal line parameters' /> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='monitor' doc='Copy debug output to the current terminal line' /> |
| </params> |
| </command> |
| <command id='show stats'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='stats' doc='Show statistical values' /> |
| </params> |
| </command> |
| <command id='show stats level (global|peer|subscriber)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='stats' doc='Show statistical values' /> |
| <param name='level' doc='Set the maximum group level' /> |
| <param name='global' doc='Show global groups only' /> |
| <param name='peer' doc='Show global and network peer related groups' /> |
| <param name='subscriber' doc='Show global, peer, and subscriber groups' /> |
| </params> |
| </command> |
| <command id='show asciidoc counters'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='asciidoc' doc='Asciidoc generation' /> |
| <param name='counters' doc='Generate table of all registered counters' /> |
| </params> |
| </command> |
| <command id='show rate-counters'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='rate-counters' doc='Show all rate counters' /> |
| </params> |
| </command> |
| <command id='show network'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='network' doc='Display information about a GSM NETWORK' /> |
| </params> |
| </command> |
| <command id='show bts [<0-255>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='bts' doc='Display information about a BTS' /> |
| <param name='[<0-255>]' doc='BTS number' /> |
| </params> |
| </command> |
| <command id='show rejected-bts'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='rejected-bts' doc='Display recently rejected BTS devices' /> |
| </params> |
| </command> |
| <command id='show trx [<0-255>] [<0-255>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='trx' doc='Display information about a TRX' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| </params> |
| </command> |
| <command id='show trx (connected|disconnected)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='trx' doc='Display information about a TRX' /> |
| <param name='connected' doc='Show TRX with RSL connected' /> |
| <param name='disconnected' doc='Show TRX with RSL disconnected' /> |
| </params> |
| </command> |
| <command id='show timeslot [<0-255>] [<0-255>] [<0-7>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='timeslot' doc='Display information about a TS' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| <param name='[<0-7>]' doc='Timeslot Number' /> |
| </params> |
| </command> |
| <command id='show lchan [<0-255>] [<0-255>] [<0-7>] [<0-7>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='lchan' doc='Display information about a logical channel' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| <param name='[<0-7>]' doc='Timeslot Number' /> |
| <param name='[<0-7>]' doc='Logical Channel Number' /> |
| </params> |
| </command> |
| <command id='show lchan summary [<0-255>] [<0-255>] [<0-7>] [<0-7>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='lchan' doc='Display information about a logical channel' /> |
| <param name='summary' doc='Short summary (used lchans)' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| <param name='[<0-7>]' doc='Timeslot Number' /> |
| <param name='[<0-7>]' doc='Logical Channel Number' /> |
| </params> |
| </command> |
| <command id='show lchan summary-all [<0-255>] [<0-255>] [<0-7>] [<0-7>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='lchan' doc='Display information about a logical channel' /> |
| <param name='summary-all' doc='Short summary (all lchans)' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| <param name='[<0-255>]' doc='TRX Number' /> |
| <param name='[<0-7>]' doc='Timeslot Number' /> |
| <param name='[<0-7>]' doc='Logical Channel Number' /> |
| </params> |
| </command> |
| <command id='show timer [TNNNN]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='timer' doc='Show timers' /> |
| <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' /> |
| </params> |
| </command> |
| <command id='show conns'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='conns' doc='Display currently active subscriber connections' /> |
| </params> |
| </command> |
| <command id='show paging [<0-255>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='paging' doc='Display information about paging requests of a BTS' /> |
| <param name='[<0-255>]' doc='BTS Number' /> |
| </params> |
| </command> |
| <command id='show paging-group <0-255> IMSI'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='paging-group' doc='Display the paging group' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='IMSI' doc='IMSI' /> |
| </params> |
| </command> |
| <command id='handover any'> |
| <params> |
| <param name='handover' doc='Manually trigger handover (for debugging)' /> |
| <param name='any' doc='Pick any actively used TCH/F or TCH/H lchan and handover to any other BTS. This is likely to fail if not all BTS are guaranteed to be reachable by the MS.' /> |
| </params> |
| </command> |
| <command id='assignment any'> |
| <params> |
| <param name='assignment' doc='Manually trigger assignment (for debugging)' /> |
| <param name='any' doc='Pick any actively used TCH/F or TCH/H lchan and re-assign within the same BTS. This will fail if no lchans of the same type are available besides the used one.' /> |
| </params> |
| </command> |
| <command id='handover any to arfcn <0-1023> bsic (<0-63>|any)'> |
| <params> |
| <param name='handover' doc='Manually trigger handover (for debugging)' /> |
| <param name='any' doc='Pick any actively used TCH/F or TCH/H lchan to handover to another cell. This is likely to fail outside of a lab setup where you are certain that all MS are able to see the target cell.' /> |
| <param name='to' doc=''to'' /> |
| <param name='arfcn' doc='ARFCN of neighbor cell' /> |
| <param name='<0-1023>' doc='ARFCN value' /> |
| <param name='bsic' doc='BSIC of neighbor cell' /> |
| <param name='<0-63>' doc='BSIC value' /> |
| <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /> |
| </params> |
| </command> |
| <command id='logging enable'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='enable' doc='Enables logging to this vty' /> |
| </params> |
| </command> |
| <command id='logging disable'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='disable' doc='Disables logging to this vty' /> |
| </params> |
| </command> |
| <command id='logging filter all (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='filter' doc='Filter log messages' /> |
| <param name='all' doc='Do you want to log all messages?' /> |
| <param name='0' doc='Only print messages matched by other filters' /> |
| <param name='1' doc='Bypass filter and print all messages' /> |
| </params> |
| </command> |
| <command id='logging color (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='color' doc='Configure color-printing for log messages' /> |
| <param name='0' doc='Don't use color for printing messages' /> |
| <param name='1' doc='Use color for printing messages' /> |
| </params> |
| </command> |
| <command id='logging timestamp (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='timestamp' doc='Configure log message timestamping' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with current timestamp' /> |
| </params> |
| </command> |
| <command id='logging print extended-timestamp (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='extended-timestamp' doc='Configure log message timestamping' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> |
| </params> |
| </command> |
| <command id='logging print category (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='category' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with category/subsystem name' /> |
| </params> |
| </command> |
| <command id='logging print category-hex (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='category-hex' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> |
| </params> |
| </command> |
| <command id='logging print level (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='level' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with the log level name' /> |
| </params> |
| </command> |
| <command id='logging print file (0|1|basename) [last]'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='file' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with the source file and line' /> |
| <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> |
| <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> |
| </params> |
| </command> |
| <command id='logging set-log-mask MASK'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='set-log-mask' doc='Set the logmask of this logging target' /> |
| <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' /> |
| </params> |
| </command> |
| <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> |
| <param name='mm' doc='Layer3 Mobility Management (MM)' /> |
| <param name='rr' doc='Layer3 Radio Resource (RR)' /> |
| <param name='rsl' doc='A-bis Radio Signalling Link (RSL)' /> |
| <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> |
| <param name='pag' doc='Paging Subsystem' /> |
| <param name='meas' doc='Radio Measurement Processing' /> |
| <param name='msc' doc='Mobile Switching Center' /> |
| <param name='ho' doc='Hand-Over Process' /> |
| <param name='hodec' doc='Hand-Over Decision' /> |
| <param name='ref' doc='Reference Counting' /> |
| <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> |
| <param name='ctrl' doc='Control interface' /> |
| <param name='filter' doc='BSC/NAT IMSI based filtering' /> |
| <param name='pcu' doc='PCU Interface' /> |
| <param name='lcls' doc='Local Call, Local Switch' /> |
| <param name='chan' doc='lchan FSM' /> |
| <param name='ts' doc='timeslot FSM' /> |
| <param name='as' doc='assignment FSM' /> |
| <param name='lglobal' doc='Library-internal global log family' /> |
| <param name='llapd' doc='LAPD in libosmogsm' /> |
| <param name='linp' doc='A-bis Intput Subsystem' /> |
| <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> |
| <param name='lmi' doc='A-bis Input Driver for Signalling' /> |
| <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> |
| <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> |
| <param name='lctrl' doc='Control Interface' /> |
| <param name='lgtp' doc='GPRS GTP library' /> |
| <param name='lstats' doc='Statistics messages and logging' /> |
| <param name='lgsup' doc='Generic Subscriber Update Protocol' /> |
| <param name='loap' doc='Osmocom Authentication Protocol' /> |
| <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> |
| <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> |
| <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> |
| <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> |
| <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> |
| <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> |
| <param name='lrspro' doc='Remote SIM protocol' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='logging level set-all (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='logging level force-all (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='no logging level force-all'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> |
| </params> |
| </command> |
| <command id='show logging vty'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='logging' doc='Show current logging configuration' /> |
| <param name='vty' doc='Show current logging configuration for this vty' /> |
| </params> |
| </command> |
| <command id='show alarms'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='alarms' doc='Show current logging configuration' /> |
| </params> |
| </command> |
| <command id='show talloc-context (application|all) (full|brief|DEPTH)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='talloc-context' doc='Show talloc memory hierarchy' /> |
| <param name='application' doc='Application's context' /> |
| <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> |
| <param name='full' doc='Display a full talloc memory hierarchy' /> |
| <param name='brief' doc='Display a brief talloc memory hierarchy' /> |
| <param name='DEPTH' doc='Specify required maximal depth value' /> |
| </params> |
| </command> |
| <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='talloc-context' doc='Show talloc memory hierarchy' /> |
| <param name='application' doc='Application's context' /> |
| <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> |
| <param name='full' doc='Display a full talloc memory hierarchy' /> |
| <param name='brief' doc='Display a brief talloc memory hierarchy' /> |
| <param name='DEPTH' doc='Specify required maximal depth value' /> |
| <param name='tree' doc='Display only a specific memory chunk' /> |
| <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' /> |
| </params> |
| </command> |
| <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='talloc-context' doc='Show talloc memory hierarchy' /> |
| <param name='application' doc='Application's context' /> |
| <param name='all' doc='All contexts, if NULL-context tracking is enabled' /> |
| <param name='full' doc='Display a full talloc memory hierarchy' /> |
| <param name='brief' doc='Display a brief talloc memory hierarchy' /> |
| <param name='DEPTH' doc='Specify required maximal depth value' /> |
| <param name='filter' doc='Filter chunks using regular expression' /> |
| <param name='REGEXP' doc='Regular expression' /> |
| </params> |
| </command> |
| <command id='show bts <0-255> neighbor arfcn <0-1023> bsic (<0-63>|any)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='bts' doc='Display information about a BTS' /> |
| <param name='<0-255>' doc='BTS number' /> |
| <param name='neighbor' doc='Query which cell would be the target for this neighbor ARFCN+BSIC' /> |
| <param name='arfcn' doc='ARFCN of neighbor cell' /> |
| <param name='<0-1023>' doc='ARFCN value' /> |
| <param name='bsic' doc='BSIC of neighbor cell' /> |
| <param name='<0-63>' doc='BSIC value' /> |
| <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /> |
| </params> |
| </command> |
| <command id='drop bts connection <0-65535> (oml|rsl)'> |
| <params> |
| <param name='drop' doc='Debug/Simulation command to drop Abis/IP BTS' /> |
| <param name='bts' doc='Debug/Simulation command to drop Abis/IP BTS' /> |
| <param name='connection' doc='Debug/Simulation command to drop Abis/IP BTS' /> |
| <param name='<0-65535>' doc='BTS NR' /> |
| <param name='oml' doc='Drop OML Connection' /> |
| <param name='rsl' doc='Drop RSL Connection' /> |
| </params> |
| </command> |
| <command id='restart-bts <0-65535>'> |
| <params> |
| <param name='restart-bts' doc='Restart ip.access nanoBTS through OML' /> |
| <param name='<0-65535>' doc='BTS Number' /> |
| </params> |
| </command> |
| <command id='bts <0-255> resend-system-information'> |
| <params> |
| <param name='bts' doc='BTS Specific Commands' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='resend-system-information' doc='Re-generate + re-send BCCH SYSTEM INFORMATION' /> |
| </params> |
| </command> |
| <command id='bts <0-255> trx <0-255> timeslot <0-7> pdch (activate|deactivate)'> |
| <params> |
| <param name='bts' doc='BTS for manual command' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='trx' doc='TRX for manual command' /> |
| <param name='<0-255>' doc='TRX Number' /> |
| <param name='timeslot' doc='Timeslot for manual command' /> |
| <param name='<0-7>' doc='Timeslot Number' /> |
| <param name='pdch' doc='Packet Data Channel' /> |
| <param name='activate' doc='Activate Dynamic PDCH/TCH (-> PDCH mode)' /> |
| <param name='deactivate' doc='Deactivate Dynamic PDCH/TCH (-> TCH mode)' /> |
| </params> |
| </command> |
| <command id='bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> (activate|deactivate) (hr|fr|efr|amr) [<0-7>]'> |
| <params> |
| <param name='bts' doc='BTS for manual command' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='trx' doc='TRX for manual command' /> |
| <param name='<0-255>' doc='TRX Number' /> |
| <param name='timeslot' doc='Timeslot for manual command' /> |
| <param name='<0-7>' doc='Timeslot Number' /> |
| <param name='sub-slot' doc='Sub-slot for manual command' /> |
| <param name='<0-7>' doc='Sub-slot Number' /> |
| <param name='activate' doc='Manual Channel Activation (e.g. for BER test)' /> |
| <param name='deactivate' doc='Manual Channel Deactivation (e.g. for BER test)' /> |
| <param name='hr' doc='Half-Rate v1' /> |
| <param name='fr' doc='Full-Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multi-Rate' /> |
| <param name='[<0-7>]' doc='AMR Mode' /> |
| </params> |
| </command> |
| <command id='bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> mdcx A.B.C.D <0-65535>'> |
| <params> |
| <param name='bts' doc='BTS for manual command' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='trx' doc='TRX for manual command' /> |
| <param name='<0-255>' doc='TRX Number' /> |
| <param name='timeslot' doc='Timeslot for manual command' /> |
| <param name='<0-7>' doc='Timeslot Number' /> |
| <param name='sub-slot' doc='Sub-slot for manual command' /> |
| <param name='<0-7>' doc='Sub-slot Number' /> |
| <param name='mdcx' doc='Modify RTP Connection' /> |
| <param name='A.B.C.D' doc='MGW IP Address' /> |
| <param name='<0-65535>' doc='MGW UDP Port' /> |
| </params> |
| </command> |
| <command id='bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> handover <0-255>'> |
| <params> |
| <param name='bts' doc='BTS for manual command' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='trx' doc='TRX for manual command' /> |
| <param name='<0-255>' doc='TRX Number' /> |
| <param name='timeslot' doc='Timeslot for manual command' /> |
| <param name='<0-7>' doc='Timeslot Number' /> |
| <param name='sub-slot' doc='Sub-slot for manual command' /> |
| <param name='<0-7>' doc='Sub-slot Number' /> |
| <param name='handover' doc='Manually trigger handover (for debugging)' /> |
| <param name='<0-255>' doc='New BTS Number' /> |
| </params> |
| </command> |
| <command id='bts <0-255> trx <0-255> timeslot <0-7> sub-slot <0-7> assignment'> |
| <params> |
| <param name='bts' doc='BTS for manual command' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='trx' doc='TRX for manual command' /> |
| <param name='<0-255>' doc='TRX Number' /> |
| <param name='timeslot' doc='Timeslot for manual command' /> |
| <param name='<0-7>' doc='Timeslot Number' /> |
| <param name='sub-slot' doc='Sub-slot for manual command' /> |
| <param name='<0-7>' doc='Sub-slot Number' /> |
| <param name='assignment' doc='Manually trigger assignment (for debugging)' /> |
| </params> |
| </command> |
| <command id='bts <0-255> smscb-command (normal|schedule|default) <1-4> HEXSTRING'> |
| <params> |
| <param name='bts' doc='BTS related commands' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='smscb-command' doc='SMS Cell Broadcast' /> |
| <param name='normal' doc='Normal (one-shot) SMSCB Message; sent once over Abis+Um' /> |
| <param name='schedule' doc='Schedule (one-shot) SMSCB Messag; sent once over Abis+Um' /> |
| <param name='default' doc='Default (repeating) SMSCB Message; sent once over Abis, unlimited ovrer Um' /> |
| <param name='<1-4>' doc='Last Valid Block' /> |
| <param name='HEXSTRING' doc='Hex Encoded SMSCB message (up to 88 octets)' /> |
| </params> |
| </command> |
| <command id='ctrl-interface generate-trap TRAP VALUE'> |
| <params> |
| <param name='ctrl-interface' doc='Commands related to the CTRL Interface' /> |
| <param name='generate-trap' doc='Generate a TRAP for test purpose' /> |
| <param name='TRAP' doc='Identity/Name of the TRAP variable' /> |
| <param name='VALUE' doc='Value of the TRAP variable' /> |
| </params> |
| </command> |
| <command id='bts <0-255> oml class (site-manager|bts|radio-carrier|baseband-transceiver|channel|adjc|handover|power-contorl|btse|rack|test|envabtse|bport|gprs-nse|gprs-cell|gprs-nsvc|siemenshw) instance <0-255> <0-255> <0-255>'> |
| <params> |
| <param name='bts' doc='BTS related commands' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='oml' doc='Manipulate the OML managed objects' /> |
| <param name='class' doc='Object Class' /> |
| <param name='site-manager' doc='Site Manager Object' /> |
| <param name='bts' doc='BTS Object' /> |
| <param name='radio-carrier' doc='Radio Carrier Object' /> |
| <param name='baseband-transceiver' doc='Baseband Transceiver Object' /> |
| <param name='channel' doc='Channel (Timeslot) Object' /> |
| <param name='adjc' doc='Adjacent Object (Siemens)' /> |
| <param name='handover' doc='Handover Object (Siemens)' /> |
| <param name='power-contorl' doc='Power Control Object (Siemens)' /> |
| <param name='btse' doc='BTSE Object (Siemens)' /> |
| <param name='rack' doc='Rack Object (Siemens)' /> |
| <param name='test' doc='Test Object (Siemens)' /> |
| <param name='envabtse' doc='ENVABTSE Object (Siemens)' /> |
| <param name='bport' doc='BPORT Object (Siemens)' /> |
| <param name='gprs-nse' doc='GPRS NSE Object (ip.access/osmo-bts)' /> |
| <param name='gprs-cell' doc='GPRS Cell Object (ip.acecss/osmo-bts)' /> |
| <param name='gprs-nsvc' doc='GPRS NSVC Object (ip.acecss/osmo-bts)' /> |
| <param name='siemenshw' doc='SIEMENSHW Object (Siemens)' /> |
| <param name='instance' doc='Object Instance' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='<0-255>' doc='TRX Number' /> |
| <param name='<0-255>' doc='TS Number' /> |
| </params> |
| </command> |
| <command id='bts <0-255> oml class <0-255> instance <0-255> <0-255> <0-255>'> |
| <params> |
| <param name='bts' doc='BTS related commands' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='oml' doc='Manipulate the OML managed objects' /> |
| <param name='class' doc='Object Class' /> |
| <param name='<0-255>' doc='Object Class' /> |
| <param name='instance' doc='Object Instance' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='<0-255>' doc='TRX Number' /> |
| <param name='<0-255>' doc='TS Number' /> |
| </params> |
| </command> |
| <command id='bts <0-255> om2000 class (trxc|ts|tf|is|con|dp|cf|tx|rx) <0-255> <0-255> <0-255>'> |
| <params> |
| <param name='bts' doc='BTS related commands' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='om2000' doc='Manipulate the OM2000 managed objects' /> |
| <param name='class' doc='Object Class' /> |
| <param name='trxc' doc='TRX Controller' /> |
| <param name='ts' doc='Timeslot' /> |
| <param name='tf' doc='Timing Function' /> |
| <param name='is' doc='Interface Switch' /> |
| <param name='con' doc='Abis Concentrator' /> |
| <param name='dp' doc='Digital Path' /> |
| <param name='cf' doc='Central Function' /> |
| <param name='tx' doc='Transmitter' /> |
| <param name='rx' doc='Receiver' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='<0-255>' doc='Associated SO Instance' /> |
| <param name='<0-255>' doc='Instance Number' /> |
| </params> |
| </command> |
| <command id='bts <0-255> om2000 class <0-255> <0-255> <0-255> <0-255>'> |
| <params> |
| <param name='bts' doc='BTS related commands' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='om2000' doc='Manipulate the OML managed objects' /> |
| <param name='class' doc='Object Class' /> |
| <param name='<0-255>' doc='Object Class' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| <param name='<0-255>' doc='Associated SO Instance' /> |
| <param name='<0-255>' doc='Instance Number' /> |
| </params> |
| </command> |
| <command id='show e1_driver'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='e1_driver' doc='Display information about available E1 drivers' /> |
| </params> |
| </command> |
| <command id='show e1_line [line_nr] [stats]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='e1_line' doc='Display information about a E1 line' /> |
| <param name='[line_nr]' doc='E1 Line Number' /> |
| <param name='[stats]' doc='Include statistics' /> |
| </params> |
| </command> |
| <command id='show e1_timeslot [line_nr] [ts_nr]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='e1_timeslot' doc='Display information about a E1 timeslot' /> |
| <param name='[line_nr]' doc='E1 Line Number' /> |
| <param name='[ts_nr]' doc='E1 Timeslot Number' /> |
| </params> |
| </command> |
| <command id='show fsm NAME'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='fsm' doc='Show information about finite state machines' /> |
| <param name='NAME' doc='Display information about a single named finite state machine' /> |
| </params> |
| </command> |
| <command id='show fsm all'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='fsm' doc='Show information about finite state machines' /> |
| <param name='all' doc='Display a list of all registered finite state machines' /> |
| </params> |
| </command> |
| <command id='show fsm-instances NAME'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='fsm-instances' doc='Show information about finite state machine instances' /> |
| <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' /> |
| </params> |
| </command> |
| <command id='show fsm-instances all'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='fsm-instances' doc='Show information about finite state machine instances' /> |
| <param name='all' doc='Display a list of all FSM instances of all finite state machine' /> |
| </params> |
| </command> |
| <command id='show statistics'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='statistics' doc='Statistics about the BSC' /> |
| </params> |
| </command> |
| <command id='show mscs'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='mscs' doc='MSC Connections and State' /> |
| </params> |
| </command> |
| <command id='show position'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='position' doc='Position information of the BTS' /> |
| </params> |
| </command> |
| <command id='logging filter imsi IMSI'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='filter' doc='Filter log messages' /> |
| <param name='imsi' doc='Filter log messages by IMSI' /> |
| <param name='IMSI' doc='IMSI to be used as filter' /> |
| </params> |
| </command> |
| <command id='show subscriber all'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='subscriber' doc='Display information about subscribers' /> |
| <param name='all' doc='All Subscribers' /> |
| </params> |
| </command> |
| <command id='generate-location-state-trap <0-255>'> |
| <params> |
| <param name='generate-location-state-trap' doc='Generate location state report' /> |
| <param name='<0-255>' doc='BTS to report' /> |
| </params> |
| </command> |
| <command id='show access-list NAME'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='access-list' doc='IMSI access list' /> |
| <param name='NAME' doc='Name of the access list' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> users'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='users' doc='User Table' /> |
| </params> |
| </command> |
| <command id='show cs7 (sua|m3ua|ipa) [<0-65534>]'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='sua' doc='SCCP User Adaptation' /> |
| <param name='m3ua' doc='MTP3 User Adaptation' /> |
| <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> |
| <param name='[<0-65534>]' doc='Port Number' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> asp'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='asp' doc='Application Server Process (ASP)' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='as' doc='Application Server (AS)' /> |
| <param name='active' doc='Display all active ASs' /> |
| <param name='all' doc='Display all ASs (default)' /> |
| <param name='m3ua' doc='Display all m3ua ASs' /> |
| <param name='sua' doc='Display all SUA ASs' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp addressbook'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='addressbook' doc='List all SCCP addressbook entries' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp users'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='users' doc='Show List of SCCP Users registered' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp ssn <0-65535>'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='ssn' doc='Find an SCCP User registered for the given SSN' /> |
| <param name='<0-65535>' doc='Subsystem Number (SSN)' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp connections'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='connections' doc='Show List of active SCCP connections' /> |
| </params> |
| </command> |
| <command id='show cs7 instance <0-15> sccp timers'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='An instance of the SS7 stack' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| <param name='sccp' doc='Signaling Connection Control Part' /> |
| <param name='timers' doc='Show List of SCCP timers' /> |
| </params> |
| </command> |
| </node> |
| <node id='config'> |
| <name>config</name> |
| <command id='hostname WORD'> |
| <params> |
| <param name='hostname' doc='Set system's network name' /> |
| <param name='WORD' doc='This system's network name' /> |
| </params> |
| </command> |
| <command id='no hostname [HOSTNAME]'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='hostname' doc='Reset system's network name' /> |
| <param name='[HOSTNAME]' doc='Host name of this router' /> |
| </params> |
| </command> |
| <command id='password (8|) WORD'> |
| <params> |
| <param name='password' doc='Assign the terminal connection password' /> |
| <param name='8' doc='Specifies a HIDDEN password will follow' /> |
| <param name='' doc='dummy string ' /> |
| <param name='WORD' doc='The HIDDEN line password string' /> |
| </params> |
| </command> |
| <command id='password LINE'> |
| <params> |
| <param name='password' doc='Assign the terminal connection password' /> |
| <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> |
| </params> |
| </command> |
| <command id='enable password (8|) WORD'> |
| <params> |
| <param name='enable' doc='Modify enable password parameters' /> |
| <param name='password' doc='Assign the privileged level password' /> |
| <param name='8' doc='Specifies a HIDDEN password will follow' /> |
| <param name='' doc='dummy string ' /> |
| <param name='WORD' doc='The HIDDEN 'enable' password string' /> |
| </params> |
| </command> |
| <command id='enable password LINE'> |
| <params> |
| <param name='enable' doc='Modify enable password parameters' /> |
| <param name='password' doc='Assign the privileged level password' /> |
| <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> |
| </params> |
| </command> |
| <command id='no enable password'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='enable' doc='Modify enable password parameters' /> |
| <param name='password' doc='Assign the privileged level password' /> |
| </params> |
| </command> |
| <command id='banner motd default'> |
| <params> |
| <param name='banner' doc='Set banner string' /> |
| <param name='motd' doc='Strings for motd' /> |
| <param name='default' doc='Default string' /> |
| </params> |
| </command> |
| <command id='banner motd file [FILE]'> |
| <params> |
| <param name='banner' doc='Set banner' /> |
| <param name='motd' doc='Banner for motd' /> |
| <param name='file' doc='Banner from a file' /> |
| <param name='[FILE]' doc='Filename' /> |
| </params> |
| </command> |
| <command id='no banner motd'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='banner' doc='Set banner string' /> |
| <param name='motd' doc='Strings for motd' /> |
| </params> |
| </command> |
| <command id='service terminal-length <0-512>'> |
| <params> |
| <param name='service' doc='Set up miscellaneous service' /> |
| <param name='terminal-length' doc='System wide terminal length configuration' /> |
| <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> |
| </params> |
| </command> |
| <command id='no service terminal-length [<0-512>]'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='service' doc='Set up miscellaneous service' /> |
| <param name='terminal-length' doc='System wide terminal length configuration' /> |
| <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> |
| </params> |
| </command> |
| <command id='line vty'> |
| <params> |
| <param name='line' doc='Configure a terminal line' /> |
| <param name='vty' doc='Virtual terminal' /> |
| </params> |
| </command> |
| <command id='service advanced-vty'> |
| <params> |
| <param name='service' doc='Set up miscellaneous service' /> |
| <param name='advanced-vty' doc='Enable advanced mode vty interface' /> |
| </params> |
| </command> |
| <command id='no service advanced-vty'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='service' doc='Set up miscellaneous service' /> |
| <param name='advanced-vty' doc='Enable advanced mode vty interface' /> |
| </params> |
| </command> |
| <command id='show history'> |
| <params> |
| <param name='show' doc='Show running system information' /> |
| <param name='history' doc='Display the session command history' /> |
| </params> |
| </command> |
| <command id='stats reporter statsd'> |
| <params> |
| <param name='stats' doc='Configure stats sub-system' /> |
| <param name='reporter' doc='Configure a stats reporter' /> |
| <param name='statsd' doc='Report to a STATSD server' /> |
| </params> |
| </command> |
| <command id='no stats reporter statsd'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='stats' doc='Configure stats sub-system' /> |
| <param name='reporter' doc='Configure a stats reporter' /> |
| <param name='statsd' doc='Report to a STATSD server' /> |
| </params> |
| </command> |
| <command id='stats reporter log'> |
| <params> |
| <param name='stats' doc='Configure stats sub-system' /> |
| <param name='reporter' doc='Configure a stats reporter' /> |
| <param name='log' doc='Report to the logger' /> |
| </params> |
| </command> |
| <command id='no stats reporter log'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='stats' doc='Configure stats sub-system' /> |
| <param name='reporter' doc='Configure a stats reporter' /> |
| <param name='log' doc='Report to the logger' /> |
| </params> |
| </command> |
| <command id='stats interval <1-65535>'> |
| <params> |
| <param name='stats' doc='Configure stats sub-system' /> |
| <param name='interval' doc='Set the reporting interval' /> |
| <param name='<1-65535>' doc='Interval in seconds' /> |
| </params> |
| </command> |
| <command id='network'> |
| <params> |
| <param name='network' doc='Configure the GSM network' /> |
| </params> |
| </command> |
| <command id='log stderr'> |
| <params> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='stderr' doc='Logging via STDERR of the process' /> |
| </params> |
| </command> |
| <command id='no log stderr'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='stderr' doc='Logging via STDERR of the process' /> |
| </params> |
| </command> |
| <command id='log file .FILENAME'> |
| <params> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='file' doc='Logging to text file' /> |
| <param name='.FILENAME' doc='Filename' /> |
| </params> |
| </command> |
| <command id='no log file .FILENAME'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='file' doc='Logging to text file' /> |
| <param name='.FILENAME' doc='Filename' /> |
| </params> |
| </command> |
| <command id='log alarms <2-32700>'> |
| <params> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='alarms' doc='Logging alarms to osmo_strrb' /> |
| <param name='<2-32700>' doc='Maximum number of messages to log' /> |
| </params> |
| </command> |
| <command id='no log alarms'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='alarms' doc='Logging alarms to osmo_strrb' /> |
| </params> |
| </command> |
| <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> |
| <params> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='syslog' doc='Logging via syslog' /> |
| <param name='authpriv' doc='Security/authorization messages facility' /> |
| <param name='cron' doc='Clock daemon (cron/at) facility' /> |
| <param name='daemon' doc='General system daemon facility' /> |
| <param name='ftp' doc='Ftp daemon facility' /> |
| <param name='lpr' doc='Line printer facility' /> |
| <param name='mail' doc='Mail facility' /> |
| <param name='news' doc='News facility' /> |
| <param name='user' doc='Generic facility' /> |
| <param name='uucp' doc='UUCP facility' /> |
| </params> |
| </command> |
| <command id='log syslog local <0-7>'> |
| <params> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='syslog' doc='Logging via syslog' /> |
| <param name='local' doc='Syslog LOCAL facility' /> |
| <param name='<0-7>' doc='Local facility number' /> |
| </params> |
| </command> |
| <command id='no log syslog'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='syslog' doc='Logging via syslog' /> |
| </params> |
| </command> |
| <command id='log gsmtap [HOSTNAME]'> |
| <params> |
| <param name='log' doc='Configure logging sub-system' /> |
| <param name='gsmtap' doc='Logging via GSMTAP' /> |
| <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> |
| </params> |
| </command> |
| <command id='e1_input'> |
| <params> |
| <param name='e1_input' doc='Configure E1/T1/J1 TDM input' /> |
| </params> |
| </command> |
| <command id='msc [<0-1000>]'> |
| <params> |
| <param name='msc' doc='Configure MSC details' /> |
| <param name='[<0-1000>]' doc='MSC connection to configure' /> |
| </params> |
| </command> |
| <command id='bsc'> |
| <params> |
| <param name='bsc' doc='Configure BSC' /> |
| </params> |
| </command> |
| <command id='ctrl'> |
| <params> |
| <param name='ctrl' doc='Configure the Control Interface' /> |
| </params> |
| </command> |
| <command id='cs7 instance <0-15>'> |
| <params> |
| <param name='cs7' doc='ITU-T Signaling System 7' /> |
| <param name='instance' doc='Configure a SS7 Instance' /> |
| <param name='<0-15>' doc='An instance of the SS7 stack' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-log'> |
| <name>config-log</name> |
| <command id='logging filter all (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='filter' doc='Filter log messages' /> |
| <param name='all' doc='Do you want to log all messages?' /> |
| <param name='0' doc='Only print messages matched by other filters' /> |
| <param name='1' doc='Bypass filter and print all messages' /> |
| </params> |
| </command> |
| <command id='logging color (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='color' doc='Configure color-printing for log messages' /> |
| <param name='0' doc='Don't use color for printing messages' /> |
| <param name='1' doc='Use color for printing messages' /> |
| </params> |
| </command> |
| <command id='logging timestamp (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='timestamp' doc='Configure log message timestamping' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with current timestamp' /> |
| </params> |
| </command> |
| <command id='logging print extended-timestamp (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='extended-timestamp' doc='Configure log message timestamping' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> |
| </params> |
| </command> |
| <command id='logging print category (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='category' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with category/subsystem name' /> |
| </params> |
| </command> |
| <command id='logging print category-hex (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='category-hex' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' /> |
| </params> |
| </command> |
| <command id='logging print level (0|1)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='level' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with the log level name' /> |
| </params> |
| </command> |
| <command id='logging print file (0|1|basename) [last]'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='print' doc='Log output settings' /> |
| <param name='file' doc='Configure log message' /> |
| <param name='0' doc='Don't prefix each log message' /> |
| <param name='1' doc='Prefix each log message with the source file and line' /> |
| <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' /> |
| <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' /> |
| </params> |
| </command> |
| <command id='logging level (rll|mm|rr|rsl|nm|pag|meas|msc|ho|hodec|ref|nat|ctrl|filter|pcu|lcls|chan|ts|as|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='rll' doc='A-bis Radio Link Layer (RLL)' /> |
| <param name='mm' doc='Layer3 Mobility Management (MM)' /> |
| <param name='rr' doc='Layer3 Radio Resource (RR)' /> |
| <param name='rsl' doc='A-bis Radio Signalling Link (RSL)' /> |
| <param name='nm' doc='A-bis Network Management / O&M (NM/OML)' /> |
| <param name='pag' doc='Paging Subsystem' /> |
| <param name='meas' doc='Radio Measurement Processing' /> |
| <param name='msc' doc='Mobile Switching Center' /> |
| <param name='ho' doc='Hand-Over Process' /> |
| <param name='hodec' doc='Hand-Over Decision' /> |
| <param name='ref' doc='Reference Counting' /> |
| <param name='nat' doc='GSM 08.08 NAT/Multiplexer' /> |
| <param name='ctrl' doc='Control interface' /> |
| <param name='filter' doc='BSC/NAT IMSI based filtering' /> |
| <param name='pcu' doc='PCU Interface' /> |
| <param name='lcls' doc='Local Call, Local Switch' /> |
| <param name='chan' doc='lchan FSM' /> |
| <param name='ts' doc='timeslot FSM' /> |
| <param name='as' doc='assignment FSM' /> |
| <param name='lglobal' doc='Library-internal global log family' /> |
| <param name='llapd' doc='LAPD in libosmogsm' /> |
| <param name='linp' doc='A-bis Intput Subsystem' /> |
| <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> |
| <param name='lmi' doc='A-bis Input Driver for Signalling' /> |
| <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> |
| <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> |
| <param name='lctrl' doc='Control Interface' /> |
| <param name='lgtp' doc='GPRS GTP library' /> |
| <param name='lstats' doc='Statistics messages and logging' /> |
| <param name='lgsup' doc='Generic Subscriber Update Protocol' /> |
| <param name='loap' doc='Osmocom Authentication Protocol' /> |
| <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> |
| <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> |
| <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> |
| <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> |
| <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> |
| <param name='ljibuf' doc='libosmo-netif Jitter Buffer' /> |
| <param name='lrspro' doc='Remote SIM protocol' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='logging level set-all (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='logging level force-all (debug|info|notice|error|fatal)'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the 'no logging level force-all' command. Note: any 'logging level <category> <level>' commands will have no visible effect after this, until the forced level is released.' /> |
| <param name='debug' doc='Log debug messages and higher levels' /> |
| <param name='info' doc='Log informational messages and higher levels' /> |
| <param name='notice' doc='Log noticeable messages and higher levels' /> |
| <param name='error' doc='Log error messages and higher levels' /> |
| <param name='fatal' doc='Log only fatal messages' /> |
| </params> |
| </command> |
| <command id='no logging level force-all'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='logging' doc='Configure logging' /> |
| <param name='level' doc='Set the log level for a specified category' /> |
| <param name='force-all' doc='Release any globally forced log level set with 'logging level force-all <level>'' /> |
| </params> |
| </command> |
| <command id='logging filter imsi IMSI'> |
| <params> |
| <param name='logging' doc='Configure logging' /> |
| <param name='filter' doc='Filter log messages' /> |
| <param name='imsi' doc='Filter log messages by IMSI' /> |
| <param name='IMSI' doc='IMSI to be used as filter' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-stats'> |
| <name>config-stats</name> |
| <command id='local-ip ADDR'> |
| <params> |
| <param name='local-ip' doc='Set the IP address to which we bind locally' /> |
| <param name='ADDR' doc='IP Address' /> |
| </params> |
| </command> |
| <command id='no local-ip'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='local-ip' doc='Set the IP address to which we bind locally' /> |
| </params> |
| </command> |
| <command id='remote-ip ADDR'> |
| <params> |
| <param name='remote-ip' doc='Set the remote IP address to which we connect' /> |
| <param name='ADDR' doc='IP Address' /> |
| </params> |
| </command> |
| <command id='remote-port <1-65535>'> |
| <params> |
| <param name='remote-port' doc='Set the remote port to which we connect' /> |
| <param name='<1-65535>' doc='Remote port number' /> |
| </params> |
| </command> |
| <command id='mtu <100-65535>'> |
| <params> |
| <param name='mtu' doc='Set the maximum packet size' /> |
| <param name='<100-65535>' doc='Size in byte' /> |
| </params> |
| </command> |
| <command id='no mtu'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='mtu' doc='Set the maximum packet size' /> |
| </params> |
| </command> |
| <command id='prefix PREFIX'> |
| <params> |
| <param name='prefix' doc='Set the item name prefix' /> |
| <param name='PREFIX' doc='The prefix string' /> |
| </params> |
| </command> |
| <command id='no prefix'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='prefix' doc='Set the item name prefix' /> |
| </params> |
| </command> |
| <command id='level (global|peer|subscriber)'> |
| <params> |
| <param name='level' doc='Set the maximum group level' /> |
| <param name='global' doc='Report global groups only' /> |
| <param name='peer' doc='Report global and network peer related groups' /> |
| <param name='subscriber' doc='Report global, peer, and subscriber groups' /> |
| </params> |
| </command> |
| <command id='enable'> |
| <params> |
| <param name='enable' doc='Enable the reporter' /> |
| </params> |
| </command> |
| <command id='disable'> |
| <params> |
| <param name='disable' doc='Disable the reporter' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-line'> |
| <name>config-line</name> |
| <command id='login'> |
| <params> |
| <param name='login' doc='Enable password checking' /> |
| </params> |
| </command> |
| <command id='no login'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='login' doc='Enable password checking' /> |
| </params> |
| </command> |
| <command id='bind A.B.C.D [<0-65535>]'> |
| <params> |
| <param name='bind' doc='Accept VTY telnet connections on local interface' /> |
| <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> |
| <param name='[<0-65535>]' doc='Local TCP port number' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-e1_input'> |
| <name>config-e1_input</name> |
| <command id='e1_line <0-255> driver (misdn|misdn_lapd|dahdi|ipa|unixsocket)'> |
| <params> |
| <param name='e1_line' doc='Configure E1/T1/J1 Line' /> |
| <param name='<0-255>' doc='Line Number' /> |
| <param name='driver' doc='Set driver for this line' /> |
| <param name='misdn' doc='mISDN supported E1 Card (kernel LAPD)' /> |
| <param name='misdn_lapd' doc='mISDN supported E1 Card (userspace LAPD)' /> |
| <param name='dahdi' doc='DAHDI supported E1/T1/J1 Card' /> |
| <param name='ipa' doc='IPA TCP/IP input' /> |
| <param name='unixsocket' doc='HSL TCP/IP input' /> |
| </params> |
| </command> |
| <command id='e1_line <0-255> port <0-255>'> |
| <params> |
| <param name='e1_line' doc='Configure E1/T1/J1 Line' /> |
| <param name='<0-255>' doc='Line Number' /> |
| <param name='port' doc='Set physical port/span/card number' /> |
| <param name='<0-255>' doc='E1/T1 Port/Span/Card number' /> |
| </params> |
| </command> |
| <command id='e1_line <0-255> socket .SOCKET'> |
| <params> |
| <param name='e1_line' doc='Configure E1/T1/J1 Line' /> |
| <param name='<0-255>' doc='Line Number' /> |
| <param name='socket' doc='Set socket path for unixsocket' /> |
| <param name='.SOCKET' doc='socket path' /> |
| </params> |
| </command> |
| <command id='e1_line <0-255> name .LINE'> |
| <params> |
| <param name='e1_line' doc='Configure E1/T1/J1 Line' /> |
| <param name='<0-255>' doc='Line Number' /> |
| <param name='name' doc='Set name for this line' /> |
| <param name='.LINE' doc='Human readable name' /> |
| </params> |
| </command> |
| <command id='e1_line <0-255> keepalive'> |
| <params> |
| <param name='e1_line' doc='Configure E1/T1/J1 Line' /> |
| <param name='<0-255>' doc='Line Number' /> |
| <param name='keepalive' doc='Enable keep-alive probing' /> |
| </params> |
| </command> |
| <command id='e1_line <0-255> keepalive <1-300> <1-20> <1-300>'> |
| <params> |
| <param name='e1_line' doc='Configure E1/T1/J1 Line' /> |
| <param name='<0-255>' doc='Line Number' /> |
| <param name='keepalive' doc='Enable keep-alive probing' /> |
| <param name='<1-300>' doc='Idle interval in seconds before probes are sent' /> |
| <param name='<1-20>' doc='Number of probes to sent' /> |
| <param name='<1-300>' doc='Delay between probe packets in seconds' /> |
| </params> |
| </command> |
| <command id='no e1_line <0-255> keepalive'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='e1_line' doc='Configure E1/T1/J1 Line' /> |
| <param name='<0-255>' doc='Line Number' /> |
| <param name='keepalive' doc='Enable keep-alive probing' /> |
| </params> |
| </command> |
| <command id='ipa bind A.B.C.D'> |
| <params> |
| <param name='ipa' doc='ipa driver config' /> |
| <param name='bind' doc='Set ipa local bind address' /> |
| <param name='A.B.C.D' doc='Listen on this IP address (default 0.0.0.0)' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-ctrl'> |
| <name>config-ctrl</name> |
| <command id='bind A.B.C.D'> |
| <params> |
| <param name='bind' doc='Set bind address to listen for Control connections' /> |
| <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-cs7'> |
| <name>config-cs7</name> |
| <command id='description .TEXT'> |
| <params> |
| <param name='description' doc='Save human-readable description of the object' /> |
| <param name='.TEXT' doc='Text until the end of the line' /> |
| </params> |
| </command> |
| <command id='network-indicator (international | national | reserved | spare)'> |
| <params> |
| <param name='network-indicator' doc='Configure the Network Indicator' /> |
| <param name='international' doc='International Network' /> |
| <param name='national' doc='National Network' /> |
| <param name='reserved' doc='Reserved Network' /> |
| <param name='spare' doc='Spare Network' /> |
| </params> |
| </command> |
| <command id='point-code POINT_CODE'> |
| <params> |
| <param name='point-code' doc='Configure the local Point Code' /> |
| <param name='POINT_CODE' doc='Point Code' /> |
| </params> |
| </command> |
| <command id='point-code format <1-24> [<1-23>] [<1-22>]'> |
| <params> |
| <param name='point-code' doc='Point Code' /> |
| <param name='format' doc='Configure Point Code Format' /> |
| <param name='<1-24>' doc='Length of first PC component' /> |
| <param name='[<1-23>]' doc='Length of second PC component' /> |
| <param name='[<1-22>]' doc='Length of third PC component' /> |
| </params> |
| </command> |
| <command id='point-code format default'> |
| <params> |
| <param name='point-code' doc='Point Code' /> |
| <param name='format' doc='Configure Point Code Format' /> |
| <param name='default' doc='Default Point Code Format (3.8.3)' /> |
| </params> |
| </command> |
| <command id='point-code delimiter (default|dash)'> |
| <params> |
| <param name='point-code' doc='Point Code' /> |
| <param name='delimiter' doc='Configure Point Code Delimiter' /> |
| <param name='default' doc='Use dot as delimiter' /> |
| <param name='dash' doc='User dash as delimiter' /> |
| </params> |
| </command> |
| <command id='xua rkm routing-key-allocation (static-only|dynamic-permitted)'> |
| <params> |
| <param name='xua' doc='SIGTRAN xxxUA related' /> |
| <param name='rkm' doc='Routing Key Management' /> |
| <param name='routing-key-allocation' doc='Routing Key Management Allocation Policy' /> |
| <param name='static-only' doc='Only static (pre-confgured) Routing Keys permitted' /> |
| <param name='dynamic-permitted' doc='Dynamically allocate Routing Keys for what ASPs request' /> |
| </params> |
| </command> |
| <command id='asp NAME <0-65535> <0-65535> (sua|m3ua|ipa)'> |
| <params> |
| <param name='asp' doc='Configure Application Server Process' /> |
| <param name='NAME' doc='Name of ASP' /> |
| <param name='<0-65535>' doc='Remote SCTP port number' /> |
| <param name='<0-65535>' doc='Local SCTP port number' /> |
| <param name='sua' doc='SCCP User Adaptation' /> |
| <param name='m3ua' doc='MTP3 User Adaptation' /> |
| <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> |
| </params> |
| </command> |
| <command id='no asp NAME'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='asp' doc='Disable Application Server Process' /> |
| <param name='NAME' doc='Name of ASP' /> |
| </params> |
| </command> |
| <command id='as NAME (sua|m3ua|ipa)'> |
| <params> |
| <param name='as' doc='Configure an Application Server' /> |
| <param name='NAME' doc='Name of the Application Server' /> |
| <param name='sua' doc='SCCP User Adaptation' /> |
| <param name='m3ua' doc='MTP3 User Adaptation' /> |
| <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> |
| </params> |
| </command> |
| <command id='no as NAME'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='as' doc='Disable Application Server' /> |
| <param name='NAME' doc='Name of AS' /> |
| </params> |
| </command> |
| <command id='sccp-address NAME'> |
| <params> |
| <param name='sccp-address' doc='Create/Modify an SCCP addressbook entry' /> |
| <param name='NAME' doc='Name of the SCCP Address' /> |
| </params> |
| </command> |
| <command id='no sccp-address NAME'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='sccp-address' doc='Delete an SCCP addressbook entry' /> |
| <param name='NAME' doc='Name of the SCCP Address' /> |
| </params> |
| </command> |
| <command id='sccp-timer (conn_est|ias|iar|rel|repeat_rel|int|guard|reset|reassembly) <1-999999>'> |
| <params> |
| <param name='sccp-timer' doc='Configure SCCP timer values, see ITU-T Q.714' /> |
| <param name='conn_est' doc='Waiting for connection confirm message, 1 to 2 minutes (default: 60)' /> |
| <param name='ias' doc='Send keep-alive: on an idle connection, delay before sending an Idle Timer message, 5 to 10 minutes (default: 420)' /> |
| <param name='iar' doc='Receive keep-alive: on an idle connection, delay until considering a connection as stale, 11 to 21 minutes (default: 900)' /> |
| <param name='rel' doc='Waiting for release complete message, 10 to 20 seconds (default: 10)' /> |
| <param name='repeat_rel' doc='Waiting for release complete message; or to repeat sending released message after the initial expiry, 10 to 20 seconds (default: 10)' /> |
| <param name='int' doc='Waiting for release complete message; or to release connection resources, freeze the LRN and alert a maintenance function after the initial expiry, extending to 1 minute (default: 60)' /> |
| <param name='guard' doc='Waiting to resume normal procedure for temporary connection sections during the restart procedure, 23 to 25 minutes (default: 1380)' /> |
| <param name='reset' doc='Waiting to release temporary connection section or alert maintenance function after reset request message is sent, 10 to 20 seconds (default: 10)' /> |
| <param name='reassembly' doc='Waiting to receive all the segments of the remaining segments, single segmented message after receiving the first segment, 10 to 20 seconds (default: 10)' /> |
| <param name='<1-999999>' doc='Timer value, in seconds' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-cs7-as'> |
| <name>config-cs7-as</name> |
| <command id='description .TEXT'> |
| <params> |
| <param name='description' doc='Save human-readable description of the object' /> |
| <param name='.TEXT' doc='Text until the end of the line' /> |
| </params> |
| </command> |
| <command id='asp NAME'> |
| <params> |
| <param name='asp' doc='Specify that a given ASP is part of this AS' /> |
| <param name='NAME' doc='Name of ASP to be added to AS' /> |
| </params> |
| </command> |
| <command id='no asp NAME'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='asp' doc='Specify ASP to be removed from this AS' /> |
| <param name='NAME' doc='Name of ASP to be removed' /> |
| </params> |
| </command> |
| <command id='traffic-mode (broadcast | loadshare | roundrobin | override)'> |
| <params> |
| <param name='traffic-mode' doc='Specifies traffic mode of operation of the ASP within the AS' /> |
| <param name='broadcast' doc='Broadcast to all ASP within AS' /> |
| <param name='loadshare' doc='Share Load among all ASP within AS' /> |
| <param name='roundrobin' doc='Round-Robin between all ASP within AS' /> |
| <param name='override' doc='Override' /> |
| </params> |
| </command> |
| <command id='recovery-timeout <1-2000>'> |
| <params> |
| <param name='recovery-timeout' doc='Specifies the recovery timeout value in milliseconds' /> |
| <param name='<1-2000>' doc='Recovery Timeout in Milliseconds' /> |
| </params> |
| </command> |
| <command id='qos-class <0-255>'> |
| <params> |
| <param name='qos-class' doc='Specity QoS Class of AS' /> |
| <param name='<0-255>' doc='QoS Class of AS' /> |
| </params> |
| </command> |
| <command id='routing-key RCONTEXT DPC'> |
| <params> |
| <param name='routing-key' doc='Define a routing key' /> |
| <param name='RCONTEXT' doc='Routing context number' /> |
| <param name='DPC' doc='Destination Point Code' /> |
| </params> |
| </command> |
| <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)'> |
| <params> |
| <param name='routing-key' doc='Define a routing key' /> |
| <param name='RCONTEXT' doc='Routing context number' /> |
| <param name='DPC' doc='Destination Point Code' /> |
| <param name='si' doc='Match on Service Indicator' /> |
| <param name='aal2' doc='ATM Adaption Layer 2' /> |
| <param name='bicc' doc='Bearer Independent Call Control' /> |
| <param name='b-isup' doc='Broadband ISDN User Part' /> |
| <param name='h248' doc='H.248' /> |
| <param name='isup' doc='ISDN User Part' /> |
| <param name='sat-isup' doc='Sattelite ISDN User Part' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='tup' doc='Telephony User Part' /> |
| </params> |
| </command> |
| <command id='routing-key RCONTEXT DPC ssn SSN'> |
| <params> |
| <param name='routing-key' doc='Define a routing key' /> |
| <param name='RCONTEXT' doc='Routing context number' /> |
| <param name='DPC' doc='Destination Point Code' /> |
| <param name='ssn' doc='Match on Sub-System Number' /> |
| <param name='SSN' doc='Sub-System Number to match on' /> |
| </params> |
| </command> |
| <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN'> |
| <params> |
| <param name='routing-key' doc='Define a routing key' /> |
| <param name='RCONTEXT' doc='Routing context number' /> |
| <param name='DPC' doc='Destination Point Code' /> |
| <param name='si' doc='Match on Service Indicator' /> |
| <param name='aal2' doc='ATM Adaption Layer 2' /> |
| <param name='bicc' doc='Bearer Independent Call Control' /> |
| <param name='b-isup' doc='Broadband ISDN User Part' /> |
| <param name='h248' doc='H.248' /> |
| <param name='isup' doc='ISDN User Part' /> |
| <param name='sat-isup' doc='Sattelite ISDN User Part' /> |
| <param name='sccp' doc='Signalling Connection Control Part' /> |
| <param name='tup' doc='Telephony User Part' /> |
| <param name='ssn' doc='Match on Sub-System Number' /> |
| <param name='SSN' doc='Sub-System Number to match on' /> |
| </params> |
| </command> |
| <command id='point-code override dpc PC'> |
| <params> |
| <param name='point-code' doc='Point Code Specific Features' /> |
| <param name='override' doc='Override (force) a point-code to hard-coded value' /> |
| <param name='dpc' doc='Override Source Point Code' /> |
| <param name='PC' doc='Override Destination Point Code' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-cs7-asp'> |
| <name>config-cs7-asp</name> |
| <command id='description .TEXT'> |
| <params> |
| <param name='description' doc='Save human-readable description of the object' /> |
| <param name='.TEXT' doc='Text until the end of the line' /> |
| </params> |
| </command> |
| <command id='remote-ip A.B.C.D'> |
| <params> |
| <param name='remote-ip' doc='Specify Remote IP Address of ASP' /> |
| <param name='A.B.C.D' doc='Remote IP Address of ASP' /> |
| </params> |
| </command> |
| <command id='local-ip A.B.C.D'> |
| <params> |
| <param name='local-ip' doc='Specify Local IP Address from which to contact ASP' /> |
| <param name='A.B.C.D' doc='Local IP Address from which to contact of ASP' /> |
| </params> |
| </command> |
| <command id='qos-class <0-255>'> |
| <params> |
| <param name='qos-class' doc='Specify QoS Class of ASP' /> |
| <param name='<0-255>' doc='QoS Class of ASP' /> |
| </params> |
| </command> |
| <command id='block'> |
| <params> |
| <param name='block' doc='Allows a SCTP Association with ASP, but doesn't let it become active' /> |
| </params> |
| </command> |
| <command id='shutdown'> |
| <params> |
| <param name='shutdown' doc='Terminates SCTP association; New associations will be rejected' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-cs7-sccpaddr'> |
| <name>config-cs7-sccpaddr</name> |
| <command id='no point-code'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='point-code' doc='Remove point-code Number' /> |
| </params> |
| </command> |
| <command id='no subsystem-number'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='subsystem-number' doc='Remove Subsystem Number' /> |
| </params> |
| </command> |
| <command id='no global-title'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='global-title' doc='Remove Global Title' /> |
| </params> |
| </command> |
| <command id='routing-indicator (GT|PC|IP)'> |
| <params> |
| <param name='routing-indicator' doc='Add Routing Indicator' /> |
| <param name='GT' doc='by global-title' /> |
| <param name='PC' doc='by point-code' /> |
| <param name='IP' doc='by ip-address' /> |
| </params> |
| </command> |
| <command id='point-code POINT_CODE'> |
| <params> |
| <param name='point-code' doc='Add point-code Number' /> |
| <param name='POINT_CODE' doc='PC' /> |
| </params> |
| </command> |
| <command id='subsystem-number <0-4294967295>'> |
| <params> |
| <param name='subsystem-number' doc='Add Subsystem Number' /> |
| <param name='<0-4294967295>' doc='SSN' /> |
| </params> |
| </command> |
| <command id='global-title'> |
| <params> |
| <param name='global-title' doc='Add/Modify Global Title' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-cs7-sccpaddr-gt'> |
| <name>config-cs7-sccpaddr-gt</name> |
| <command id='global-title-indicator <0-15>'> |
| <params> |
| <param name='global-title-indicator' doc='Set Global Title Indicator' /> |
| <param name='<0-15>' doc='GTI' /> |
| </params> |
| </command> |
| <command id='translation-type <0-255>'> |
| <params> |
| <param name='translation-type' doc='Set Global Title Translation Type' /> |
| <param name='<0-255>' doc='TT' /> |
| </params> |
| </command> |
| <command id='numbering-plan-indicator <0-15>'> |
| <params> |
| <param name='numbering-plan-indicator' doc='Set Global Title Numbering Plan Indicator' /> |
| <param name='<0-15>' doc='NPI' /> |
| </params> |
| </command> |
| <command id='nature-of-address-indicator <0-127>'> |
| <params> |
| <param name='nature-of-address-indicator' doc='Set Global Title Nature of Address Indicator' /> |
| <param name='<0-127>' doc='NAI' /> |
| </params> |
| </command> |
| <command id='digits DIGITS'> |
| <params> |
| <param name='digits' doc='Set Global Title Digits' /> |
| <param name='DIGITS' doc='Number digits' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-net'> |
| <name>config-net</name> |
| <command id='network country code <1-999>'> |
| <params> |
| <param name='network' doc='Set the GSM network country code' /> |
| <param name='country' doc='Country commands' /> |
| <param name='code' doc='Code commands' /> |
| <param name='<1-999>' doc='Network Country Code to use' /> |
| </params> |
| </command> |
| <command id='mobile network code <0-999>'> |
| <params> |
| <param name='mobile' doc='Set the GSM mobile network code' /> |
| <param name='network' doc='Network Commands' /> |
| <param name='code' doc='Code commands' /> |
| <param name='<0-999>' doc='Mobile Network Code to use' /> |
| </params> |
| </command> |
| <command id='encryption a5 <0-3> [<0-3>] [<0-3>] [<0-3>]'> |
| <params> |
| <param name='encryption' doc='Encryption options' /> |
| <param name='a5' doc='GSM A5 Air Interface Encryption' /> |
| <param name='<0-3>' doc='A5/n Algorithm Number' /> |
| <param name='[<0-3>]' doc='A5/n Algorithm Number' /> |
| <param name='[<0-3>]' doc='A5/n Algorithm Number' /> |
| <param name='[<0-3>]' doc='A5/n Algorithm Number' /> |
| </params> |
| </command> |
| <command id='timezone <-19-19> (0|15|30|45)'> |
| <params> |
| <param name='timezone' doc='Set the Timezone Offset of the network' /> |
| <param name='<-19-19>' doc='Timezone offset (hours)' /> |
| <param name='0' doc='Timezone offset (00 minutes)' /> |
| <param name='15' doc='Timezone offset (15 minutes)' /> |
| <param name='30' doc='Timezone offset (30 minutes)' /> |
| <param name='45' doc='Timezone offset (45 minutes)' /> |
| </params> |
| </command> |
| <command id='timezone <-19-19> (0|15|30|45) <0-2>'> |
| <params> |
| <param name='timezone' doc='Set the Timezone Offset of the network' /> |
| <param name='<-19-19>' doc='Timezone offset (hours)' /> |
| <param name='0' doc='Timezone offset (00 minutes)' /> |
| <param name='15' doc='Timezone offset (15 minutes)' /> |
| <param name='30' doc='Timezone offset (30 minutes)' /> |
| <param name='45' doc='Timezone offset (45 minutes)' /> |
| <param name='<0-2>' doc='DST offset (hours)' /> |
| </params> |
| </command> |
| <command id='no timezone'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='timezone' doc='Disable network timezone override, use system tz' /> |
| </params> |
| </command> |
| <command id='periodic location update <6-1530>'> |
| <params> |
| <param name='periodic' doc='Periodic Location Updating Interval' /> |
| <param name='location' doc='Periodic Location Updating Interval' /> |
| <param name='update' doc='Periodic Location Updating Interval' /> |
| <param name='<6-1530>' doc='Periodic Location Updating Interval in Minutes' /> |
| </params> |
| </command> |
| <command id='no periodic location update'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='periodic' doc='Periodic Location Updating Interval' /> |
| <param name='location' doc='Periodic Location Updating Interval' /> |
| <param name='update' doc='Periodic Location Updating Interval' /> |
| </params> |
| </command> |
| <command id='meas-feed destination ADDR <0-65535>'> |
| <params> |
| <param name='meas-feed' doc='Measurement Report export' /> |
| <param name='destination' doc='Where to forward Measurement Report feeds' /> |
| <param name='ADDR' doc='address or hostname' /> |
| <param name='<0-65535>' doc='port number' /> |
| </params> |
| </command> |
| <command id='meas-feed scenario NAME'> |
| <params> |
| <param name='meas-feed' doc='Measurement Report export' /> |
| <param name='scenario' doc='Set a name to include in the Measurement Report feeds' /> |
| <param name='NAME' doc='Name string, up to 31 characters' /> |
| </params> |
| </command> |
| <command id='timer [TNNNN] [(<0-2147483647>|default)]'> |
| <params> |
| <param name='timer' doc='Configure or show timers' /> |
| <param name='[TNNNN]' doc='T- or X-timer-number -- 3GPP compliant timer number of the format '1234' or 'T1234' or 't1234'; Osmocom-specific timer number of the format: 'X1234' or 'x1234'.' /> |
| <param name='[<0-2147483647>]' doc='New timer value' /> |
| <param name='[default]' doc='Set to default timer value' /> |
| </params> |
| </command> |
| <command id='neci (0|1)'> |
| <params> |
| <param name='neci' doc='New Establish Cause Indication' /> |
| <param name='0' doc='Don't set the NECI bit' /> |
| <param name='1' doc='Set the NECI bit' /> |
| </params> |
| </command> |
| <command id='paging any use tch (0|1)'> |
| <params> |
| <param name='paging' doc='Assign a TCH when receiving a Paging Any request' /> |
| <param name='any' doc='Any Channel' /> |
| <param name='use' doc='Use' /> |
| <param name='tch' doc='TCH' /> |
| <param name='0' doc='Do not use TCH for Paging Request Any' /> |
| <param name='1' doc='Do use TCH for Paging Request Any' /> |
| </params> |
| </command> |
| <command id='bts <0-255>'> |
| <params> |
| <param name='bts' doc='Select a BTS to configure' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| </params> |
| </command> |
| <command id='handover (0|1|default)'> |
| <params> |
| <param name='handover' doc='Handover general config' /> |
| <param name='0' doc='Disable in-call handover' /> |
| <param name='1' doc='Enable in-call handover' /> |
| <param name='default' doc='Enable/disable handover: Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover algorithm (1|2|default)'> |
| <params> |
| <param name='handover' doc='Handover general config' /> |
| <param name='algorithm' doc='Choose algorithm for handover decision' /> |
| <param name='1' doc='Algorithm 1: trigger handover based on comparing current cell and neighbor RxLev and RxQual, only.' /> |
| <param name='2' doc='Algorithm 2: trigger handover on RxLev/RxQual, and also to balance the load across several cells. Consider available codecs. Prevent repeated handover by penalty timers.' /> |
| <param name='default' doc='Use default (1), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 window rxlev averaging (<1-10>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxlev' doc='Received-Level averaging' /> |
| <param name='averaging' doc='How many RxLev measurements are used for averaging' /> |
| <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (10), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 window rxqual averaging (<1-10>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxqual' doc='Received-Quality averaging' /> |
| <param name='averaging' doc='How many RxQual measurements are used for averaging' /> |
| <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (1), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 window rxlev neighbor averaging (<1-10>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxlev' doc='Received-Level averaging' /> |
| <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /> |
| <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /> |
| <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (10), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 power budget interval (<1-99>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='power' doc='Neighbor cell power triggering' /> |
| <param name='budget' doc='Neighbor cell power triggering' /> |
| <param name='interval' doc='How often to check for a better cell (SACCH frames)' /> |
| <param name='<1-99>' doc='Check for stronger neighbor every N number of SACCH frames' /> |
| <param name='default' doc='Use default (6), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 power budget hysteresis (<0-999>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='power' doc='Neighbor cell power triggering' /> |
| <param name='budget' doc='Neighbor cell power triggering' /> |
| <param name='hysteresis' doc='How many dB stronger must a neighbor be to become a HO candidate' /> |
| <param name='<0-999>' doc='Neighbor's strength difference in dB' /> |
| <param name='default' doc='Use default (3), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 maximum distance (<0-9999>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='maximum' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='distance' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='<0-9999>' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='default' doc='Use default (9999), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 window rxlev averaging (<1-10>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxlev' doc='Received-Level averaging' /> |
| <param name='averaging' doc='How many RxLev measurements are used for averaging' /> |
| <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (10), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 window rxqual averaging (<1-10>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxqual' doc='Received-Quality averaging' /> |
| <param name='averaging' doc='How many RxQual measurements are used for averaging' /> |
| <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (1), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 window rxlev neighbor averaging (<1-10>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxlev' doc='Received-Level averaging' /> |
| <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /> |
| <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /> |
| <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (10), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 power budget interval (<1-99>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='power' doc='Neighbor cell power triggering' /> |
| <param name='budget' doc='Neighbor cell power triggering' /> |
| <param name='interval' doc='How often to check for a better cell (SACCH frames)' /> |
| <param name='<1-99>' doc='Check for stronger neighbor every N number of SACCH frames' /> |
| <param name='default' doc='Use default (6), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 power budget hysteresis (<0-999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='power' doc='Neighbor cell power triggering' /> |
| <param name='budget' doc='Neighbor cell power triggering' /> |
| <param name='hysteresis' doc='How many dB stronger must a neighbor be to become a HO candidate' /> |
| <param name='<0-999>' doc='Neighbor's strength difference in dB' /> |
| <param name='default' doc='Use default (3), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 maximum distance (<0-9999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='maximum' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='distance' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='<0-9999>' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='default' doc='Use default (9999), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 assignment (0|1|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='assignment' doc='Enable or disable in-call channel re-assignment' /> |
| <param name='0' doc='Disable in-call assignment' /> |
| <param name='1' doc='Enable in-call assignment' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 tdma-measurement (full|subset|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='tdma-measurement' doc='Define measurement set of TDMA frames' /> |
| <param name='full' doc='Full set of 102/104 TDMA frames' /> |
| <param name='subset' doc='Sub set of 4 TDMA frames (SACCH)' /> |
| <param name='default' doc='Use default (subset), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 min rxlev (<-110--50>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /> |
| <param name='rxlev' doc='How weak may RxLev of an MS become before triggering HO' /> |
| <param name='<-110--50>' doc='minimum RxLev (dBm)' /> |
| <param name='default' doc='Use default (-100), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 min rxqual (<0-7>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /> |
| <param name='rxqual' doc='How bad may RxQual of an MS become before triggering HO' /> |
| <param name='<0-7>' doc='minimum RxQual' /> |
| <param name='default' doc='Use default (5), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 afs-bias rxlev (<0-20>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs' /> |
| <param name='rxlev' doc='RxLev improvement bias for AFS over other codecs' /> |
| <param name='<0-20>' doc='Virtual RxLev improvement (dB)' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 afs-bias rxqual (<0-7>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs' /> |
| <param name='rxqual' doc='RxQual improvement bias for AFS over other codecs' /> |
| <param name='<0-7>' doc='Virtual RxQual improvement' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 min-free-slots tch/f (<0-9999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested' /> |
| <param name='tch/f' doc='Minimum free TCH/F timeslots before cell is considered congested' /> |
| <param name='<0-9999>' doc='Number of TCH/F slots' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 min-free-slots tch/h (<0-9999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested' /> |
| <param name='tch/h' doc='Minimum free TCH/H timeslots before cell is considered congested' /> |
| <param name='<0-9999>' doc='Number of TCH/H slots' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 max-handovers (<1-9999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='max-handovers' doc='Maximum number of concurrent handovers allowed per cell' /> |
| <param name='<1-9999>' doc='Number' /> |
| <param name='default' doc='Use default (9999), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 penalty-time max-distance (<0-99999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> |
| <param name='max-distance' doc='Time to suspend handovers after leaving this cell due to exceeding max distance' /> |
| <param name='<0-99999>' doc='Seconds' /> |
| <param name='default' doc='Use default (300), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 penalty-time failed-ho (<0-99999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> |
| <param name='failed-ho' doc='Time to suspend handovers after handover failure to this cell' /> |
| <param name='<0-99999>' doc='Seconds' /> |
| <param name='default' doc='Use default (60), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 penalty-time failed-assignment (<0-99999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> |
| <param name='failed-assignment' doc='Time to suspend handovers after assignment failure in this cell' /> |
| <param name='<0-99999>' doc='Seconds' /> |
| <param name='default' doc='Use default (60), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 retries (<0-9>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='retries' doc='Immediately retry on handover/assignment failure' /> |
| <param name='<0-9>' doc='Number of retries' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 congestion-check (disabled|<1-999>|now)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='congestion-check' doc='Configure congestion check interval' /> |
| <param name='disabled' doc='Disable congestion checking, do not handover based on cell overload' /> |
| <param name='<1-999>' doc='Congestion check interval in seconds (default 10)' /> |
| <param name='now' doc='Manually trigger a congestion check to run right now' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-net-bts'> |
| <name>config-net-bts</name> |
| <command id='type (unknown|bs11|nanobts|rbs2000|nokia_site|sysmobts)'> |
| <params> |
| <param name='type' doc='BTS Vendor/Type' /> |
| <param name='unknown' doc='Unknown BTS Type' /> |
| <param name='bs11' doc='Siemens BTS (BS-11 or compatible)' /> |
| <param name='nanobts' doc='ip.access nanoBTS or compatible' /> |
| <param name='rbs2000' doc='Ericsson RBS2000 Series' /> |
| <param name='nokia_site' doc='Nokia {Metro,Ultra,In}Site' /> |
| <param name='sysmobts' doc='sysmocom sysmoBTS' /> |
| </params> |
| </command> |
| <command id='description .TEXT'> |
| <params> |
| <param name='description' doc='Save human-readable description of the object' /> |
| <param name='.TEXT' doc='Text until the end of the line' /> |
| </params> |
| </command> |
| <command id='no description'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='description' doc='Remove description of the object' /> |
| </params> |
| </command> |
| <command id='band BAND'> |
| <params> |
| <param name='band' doc='Set the frequency band of this BTS' /> |
| <param name='BAND' doc='Frequency band' /> |
| </params> |
| </command> |
| <command id='cell_identity <0-65535>'> |
| <params> |
| <param name='cell_identity' doc='Set the Cell identity of this BTS' /> |
| <param name='<0-65535>' doc='Cell Identity' /> |
| </params> |
| </command> |
| <command id='dtx uplink [force]'> |
| <params> |
| <param name='dtx' doc='Configure discontinuous transmission' /> |
| <param name='uplink' doc='Enable Uplink DTX for this BTS' /> |
| <param name='[force]' doc='MS 'shall' use DTXu instead of 'may' use (might not be supported by older phones).' /> |
| </params> |
| </command> |
| <command id='dtx downlink'> |
| <params> |
| <param name='dtx' doc='Configure discontinuous transmission' /> |
| <param name='downlink' doc='Enable Downlink DTX for this BTS' /> |
| </params> |
| </command> |
| <command id='no dtx uplink'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='dtx' doc='Configure discontinuous transmission' /> |
| <param name='uplink' doc='Disable Uplink DTX for this BTS' /> |
| </params> |
| </command> |
| <command id='no dtx downlink'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='dtx' doc='Configure discontinuous transmission' /> |
| <param name='downlink' doc='Disable Downlink DTX for this BTS' /> |
| </params> |
| </command> |
| <command id='location_area_code <0-65535>'> |
| <params> |
| <param name='location_area_code' doc='Set the Location Area Code (LAC) of this BTS' /> |
| <param name='<0-65535>' doc='LAC' /> |
| </params> |
| </command> |
| <command id='base_station_id_code <0-63>'> |
| <params> |
| <param name='base_station_id_code' doc='Set the Base Station Identity Code (BSIC) of this BTS' /> |
| <param name='<0-63>' doc='BSIC of this BTS' /> |
| </params> |
| </command> |
| <command id='ipa unit-id <0-65534> <0-255>'> |
| <params> |
| <param name='ip.access' doc='Abis/IP specific options' /> |
| <param name='unit_id' doc='Set the IPA BTS Unit ID' /> |
| <param name='<0-65534>' doc='Unit ID (Site)' /> |
| <param name='<0-255>' doc='Unit ID (BTS)' /> |
| </params> |
| </command> |
| <command id='ipa rsl-ip A.B.C.D'> |
| <params> |
| <param name='ip.access' doc='Abis/IP specific options' /> |
| <param name='rsl-ip' doc='Set the IPA RSL IP Address of the BSC' /> |
| <param name='A.B.C.D' doc='Destination IP address for RSL connection' /> |
| </params> |
| </command> |
| <command id='nokia_site skip-reset (0|1)'> |
| <params> |
| <param name='nokia_site' doc='Nokia *Site related commands' /> |
| <param name='skip-reset' doc='Skip the reset step during bootstrap process of this BTS' /> |
| <param name='0' doc='Do NOT skip the reset' /> |
| <param name='1' doc='Skip the reset' /> |
| </params> |
| </command> |
| <command id='nokia_site no-local-rel-conf (0|1)'> |
| <params> |
| <param name='nokia_site' doc='Nokia *Site related commands' /> |
| <param name='no-local-rel-conf' doc='Do not wait for RELease CONFirm message when releasing channel locally' /> |
| <param name='0' doc='Wait for RELease CONFirm' /> |
| <param name='1' doc='Do not wait for RELease CONFirm' /> |
| </params> |
| </command> |
| <command id='nokia_site bts-reset-timer <15-100>'> |
| <params> |
| <param name='nokia_site' doc='Nokia *Site related commands' /> |
| <param name='bts-reset-timer' doc='The amount of time (in sec.) between BTS_RESET is sent,' /> |
| <param name='<15-100>' doc='and the BTS is being bootstrapped.' /> |
| </params> |
| </command> |
| <command id='oml ipa stream-id <0-255> line E1_LINE'> |
| <params> |
| <param name='oml' doc='Organization & Maintenance Link' /> |
| <param name='ip.access' doc='A-bis/IP Specific Options' /> |
| <param name='stream_id' doc='Set the ip.access Stream ID of the OML link of this BTS' /> |
| <param name='<0-255>' doc='Stream Identifier' /> |
| <param name='line' doc='Virtual E1 Line Number' /> |
| <param name='E1_LINE' doc='Virtual E1 Line Number' /> |
| </params> |
| </command> |
| <command id='oml e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)'> |
| <params> |
| <param name='oml' doc='Organization & Maintenance Link' /> |
| <param name='e1' doc='OML E1/T1 Configuration' /> |
| <param name='line' doc='E1/T1 line number to be used for OML' /> |
| <param name='E1_LINE' doc='E1/T1 line number to be used for OML' /> |
| <param name='timeslot' doc='E1/T1 timeslot to be used for OML' /> |
| <param name='<1-31>' doc='E1/T1 timeslot to be used for OML' /> |
| <param name='sub-slot' doc='E1/T1 sub-slot to be used for OML' /> |
| <param name='0' doc='Use E1/T1 sub-slot 0' /> |
| <param name='1' doc='Use E1/T1 sub-slot 1' /> |
| <param name='2' doc='Use E1/T1 sub-slot 2' /> |
| <param name='3' doc='Use E1/T1 sub-slot 3' /> |
| <param name='full' doc='Use full E1 slot 3' /> |
| </params> |
| </command> |
| <command id='oml e1 tei <0-63>'> |
| <params> |
| <param name='oml' doc='Organization & Maintenance Link' /> |
| <param name='e1' doc='OML E1/T1 Configuration' /> |
| <param name='tei' doc='Set the TEI to be used for OML' /> |
| <param name='<0-63>' doc='TEI Number' /> |
| </params> |
| </command> |
| <command id='channel allocator (ascending|descending)'> |
| <params> |
| <param name='channel' doc='Channnel Allocator' /> |
| <param name='allocator' doc='Channel Allocator' /> |
| <param name='ascending' doc='Allocate Timeslots and Transceivers in ascending order' /> |
| <param name='descending' doc='Allocate Timeslots and Transceivers in descending order' /> |
| </params> |
| </command> |
| <command id='rach tx integer <0-15>'> |
| <params> |
| <param name='rach' doc='Random Access Control Channel' /> |
| <param name='tx' doc='Set the raw tx integer value in RACH Control parameters IE' /> |
| <param name='integer' doc='Set the raw tx integer value in RACH Control parameters IE' /> |
| <param name='<0-15>' doc='Raw tx integer value in RACH Control parameters IE' /> |
| </params> |
| </command> |
| <command id='rach max transmission (1|2|4|7)'> |
| <params> |
| <param name='rach' doc='Random Access Control Channel' /> |
| <param name='max' doc='Set the maximum number of RACH burst transmissions' /> |
| <param name='transmission' doc='Set the maximum number of RACH burst transmissions' /> |
| <param name='1' doc='Maximum number of 1 RACH burst transmissions' /> |
| <param name='2' doc='Maximum number of 2 RACH burst transmissions' /> |
| <param name='4' doc='Maximum number of 4 RACH burst transmissions' /> |
| <param name='7' doc='Maximum number of 7 RACH burst transmissions' /> |
| </params> |
| </command> |
| <command id='channel-descrption attach (0|1)'> |
| <params> |
| <param name='channel-descrption' doc='Channel Description' /> |
| <param name='attach' doc='Set if attachment is required' /> |
| <param name='0' doc='Attachment is NOT required' /> |
| <param name='1' doc='Attachment is required (standard)' /> |
| </params> |
| </command> |
| <command id='channel-descrption bs-pa-mfrms <2-9>'> |
| <params> |
| <param name='channel-descrption' doc='Channel Description' /> |
| <param name='bs-pa-mfrms' doc='Set number of multiframe periods for paging groups' /> |
| <param name='<2-9>' doc='Number of multiframe periods for paging groups' /> |
| </params> |
| </command> |
| <command id='channel-descrption bs-ag-blks-res <0-7>'> |
| <params> |
| <param name='channel-descrption' doc='Channel Description' /> |
| <param name='bs-ag-blks-res' doc='Set number of blocks reserved for access grant' /> |
| <param name='<0-7>' doc='Number of blocks reserved for access grant' /> |
| </params> |
| </command> |
| <command id='ccch load-indication-threshold <0-100>'> |
| <params> |
| <param name='ccch' doc='Common Control Channel' /> |
| <param name='load-indication-threshold' doc='Percentage of CCCH load at which BTS sends RSL CCCH LOAD IND' /> |
| <param name='<0-100>' doc='CCCH Load Threshold in percent (Default: 10)' /> |
| </params> |
| </command> |
| <command id='rach nm busy threshold <0-255>'> |
| <params> |
| <param name='rach' doc='Random Access Control Channel' /> |
| <param name='nm' doc='Network Management' /> |
| <param name='busy' doc='Set the NM Busy Threshold' /> |
| <param name='threshold' doc='Set the NM Busy Threshold' /> |
| <param name='<0-255>' doc='NM Busy Threshold in dB' /> |
| </params> |
| </command> |
| <command id='rach nm load average <0-65535>'> |
| <params> |
| <param name='rach' doc='Random Access Control Channel' /> |
| <param name='nm' doc='Network Management' /> |
| <param name='load' doc='Set the NM Loadaverage Slots value' /> |
| <param name='average' doc='Set the NM Loadaverage Slots value' /> |
| <param name='<0-65535>' doc='NM Loadaverage Slots value' /> |
| </params> |
| </command> |
| <command id='cell barred (0|1)'> |
| <params> |
| <param name='cell' doc='Should this cell be barred from access?' /> |
| <param name='barred' doc='Should this cell be barred from access?' /> |
| <param name='0' doc='Cell should NOT be barred' /> |
| <param name='1' doc='Cell should be barred' /> |
| </params> |
| </command> |
| <command id='rach emergency call allowed (0|1)'> |
| <params> |
| <param name='rach' doc='Random Access Control Channel' /> |
| <param name='emergency' doc='Should this cell allow emergency calls?' /> |
| <param name='call' doc='Should this cell allow emergency calls?' /> |
| <param name='allowed' doc='Should this cell allow emergency calls?' /> |
| <param name='0' doc='Do NOT allow emergency calls' /> |
| <param name='1' doc='Allow emergency calls' /> |
| </params> |
| </command> |
| <command id='rach access-control-class (0|1|2|3|4|5|6|7|8|9|11|12|13|14|15) (barred|allowed)'> |
| <params> |
| <param name='rach' doc='Random Access Control Channel' /> |
| <param name='access-control-class' doc='Set access control class' /> |
| <param name='0' doc='Access control class 0' /> |
| <param name='1' doc='Access control class 1' /> |
| <param name='2' doc='Access control class 2' /> |
| <param name='3' doc='Access control class 3' /> |
| <param name='4' doc='Access control class 4' /> |
| <param name='5' doc='Access control class 5' /> |
| <param name='6' doc='Access control class 6' /> |
| <param name='7' doc='Access control class 7' /> |
| <param name='8' doc='Access control class 8' /> |
| <param name='9' doc='Access control class 9' /> |
| <param name='11' doc='Access control class 11 for PLMN use' /> |
| <param name='12' doc='Access control class 12 for security services' /> |
| <param name='13' doc='Access control class 13 for public utilities (e.g. water/gas suppliers)' /> |
| <param name='14' doc='Access control class 14 for emergency services' /> |
| <param name='15' doc='Access control class 15 for PLMN staff' /> |
| <param name='barred' doc='barred to use access control class' /> |
| <param name='allowed' doc='allowed to use access control class' /> |
| </params> |
| </command> |
| <command id='ms max power <0-40>'> |
| <params> |
| <param name='ms' doc='MS Options' /> |
| <param name='max' doc='Maximum transmit power of the MS' /> |
| <param name='power' doc='Maximum transmit power of the MS' /> |
| <param name='<0-40>' doc='Maximum transmit power of the MS in dBm' /> |
| </params> |
| </command> |
| <command id='cell reselection hysteresis <0-14>'> |
| <params> |
| <param name='cell' doc='Cell Parameters' /> |
| <param name='reselection' doc='Cell re-selection parameters' /> |
| <param name='hysteresis' doc='Cell Re-Selection Hysteresis in dB' /> |
| <param name='<0-14>' doc='Cell Re-Selection Hysteresis in dB' /> |
| </params> |
| </command> |
| <command id='rxlev access min <0-63>'> |
| <params> |
| <param name='rxlev' doc='Minimum RxLev needed for cell access' /> |
| <param name='access' doc='Minimum RxLev needed for cell access' /> |
| <param name='min' doc='Minimum RxLev needed for cell access' /> |
| <param name='<0-63>' doc='Minimum RxLev needed for cell access (better than -110dBm)' /> |
| </params> |
| </command> |
| <command id='cell bar qualify (0|1)'> |
| <params> |
| <param name='cell' doc='Cell Parameters' /> |
| <param name='bar' doc='Cell Bar Qualify' /> |
| <param name='qualify' doc='Cell Bar Qualify' /> |
| <param name='0' doc='Set CBQ to 0' /> |
| <param name='1' doc='Set CBQ to 1' /> |
| </params> |
| </command> |
| <command id='cell reselection offset <0-126>'> |
| <params> |
| <param name='cell' doc='Cell Parameters' /> |
| <param name='reselection' doc='Cell Re-Selection Parameters' /> |
| <param name='offset' doc='Cell Re-Selection Offset (CRO) in dB' /> |
| <param name='<0-126>' doc='Cell Re-Selection Offset (CRO) in dB' /> |
| </params> |
| </command> |
| <command id='temporary offset <0-60>'> |
| <params> |
| <param name='temporary' doc='Cell selection temporary negative offset' /> |
| <param name='offset' doc='Cell selection temporary negative offset' /> |
| <param name='<0-60>' doc='Cell selection temporary negative offset in dB' /> |
| </params> |
| </command> |
| <command id='temporary offset infinite'> |
| <params> |
| <param name='temporary' doc='Cell selection temporary negative offset' /> |
| <param name='offset' doc='Cell selection temporary negative offset' /> |
| <param name='infinite' doc='Sets cell selection temporary negative offset to infinity' /> |
| </params> |
| </command> |
| <command id='penalty time <20-620>'> |
| <params> |
| <param name='penalty' doc='Cell selection penalty time' /> |
| <param name='time' doc='Cell selection penalty time' /> |
| <param name='<20-620>' doc='Cell selection penalty time in seconds (by 20s increments)' /> |
| </params> |
| </command> |
| <command id='penalty time reserved'> |
| <params> |
| <param name='penalty' doc='Cell selection penalty time' /> |
| <param name='time' doc='Cell selection penalty time' /> |
| <param name='reserved' doc='Set cell selection penalty time to reserved value 31, (indicate that CELL_RESELECT_OFFSET is subtracted from C2 and TEMPORARY_OFFSET is ignored)' /> |
| </params> |
| </command> |
| <command id='radio-link-timeout <4-64>'> |
| <params> |
| <param name='radio-link-timeout' doc='Radio link timeout criterion (BTS side)' /> |
| <param name='<4-64>' doc='Radio link timeout value (lost SACCH block)' /> |
| </params> |
| </command> |
| <command id='radio-link-timeout infinite'> |
| <params> |
| <param name='radio-link-timeout' doc='Radio link timeout criterion (BTS side)' /> |
| <param name='infinite' doc='Infinite Radio link timeout value (use only for BTS RF testing)' /> |
| </params> |
| </command> |
| <command id='gprs mode (none|gprs|egprs)'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='mode' doc='GPRS Mode for this BTS' /> |
| <param name='none' doc='GPRS Disabled on this BTS' /> |
| <param name='gprs' doc='GPRS Enabled on this BTS' /> |
| <param name='egprs' doc='EGPRS (EDGE) Enabled on this BTS' /> |
| </params> |
| </command> |
| <command id='gprs 11bit_rach_support_for_egprs (0|1)'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='11bit_rach_support_for_egprs' doc='11 bit RACH options' /> |
| <param name='0' doc='Disable 11 bit RACH for EGPRS' /> |
| <param name='1' doc='Enable 11 bit RACH for EGPRS' /> |
| </params> |
| </command> |
| <command id='gprs ns timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries|tsns-prov) <0-255>'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='ns' doc='Network Service' /> |
| <param name='timer' doc='Network Service Timer' /> |
| <param name='tns-block' doc='(un)blocking Timer (Tns-block) timeout' /> |
| <param name='tns-block-retries' doc='(un)blocking Timer (Tns-block) number of retries' /> |
| <param name='tns-reset' doc='Reset Timer (Tns-reset) timeout' /> |
| <param name='tns-reset-retries' doc='Reset Timer (Tns-reset) number of retries' /> |
| <param name='tns-test' doc='Test Timer (Tns-test) timeout' /> |
| <param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' /> |
| <param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' /> |
| <param name='tsns-prov' doc='SNS Provision Timer (Tsns-prov) timeout' /> |
| <param name='<0-255>' doc='Timer Value' /> |
| </params> |
| </command> |
| <command id='gprs routing area <0-255>'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='routing' doc='GPRS Routing Area Code' /> |
| <param name='area' doc='GPRS Routing Area Code' /> |
| <param name='<0-255>' doc='GPRS Routing Area Code' /> |
| </params> |
| </command> |
| <command id='gprs network-control-order (nc0|nc1|nc2)'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='network-control-order' doc='GPRS Network Control Order' /> |
| <param name='nc0' doc='MS controlled cell re-selection, no measurement reporting' /> |
| <param name='nc1' doc='MS controlled cell re-selection, MS sends measurement reports' /> |
| <param name='nc2' doc='Network controlled cell re-selection, MS sends measurement reports' /> |
| </params> |
| </command> |
| <command id='gprs control-ack-type-rach'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='control-ack-type-rach' doc='Set GPRS Control Ack Type for PACKET CONTROL ACKNOWLEDGMENT message to four access bursts format instead of default RLC/MAC control block' /> |
| </params> |
| </command> |
| <command id='no gprs control-ack-type-rach'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='control-ack-type-rach' doc='Set GPRS Control Ack Type for PACKET CONTROL ACKNOWLEDGMENT message to four access bursts format instead of default RLC/MAC control block' /> |
| </params> |
| </command> |
| <command id='gprs cell bvci <2-65535>'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='cell' doc='GPRS Cell Settings' /> |
| <param name='bvci' doc='GPRS BSSGP VC Identifier' /> |
| <param name='<2-65535>' doc='GPRS BSSGP VC Identifier' /> |
| </params> |
| </command> |
| <command id='gprs cell timer (blocking-timer|blocking-retries|unblocking-retries|reset-timer|reset-retries|suspend-timer|suspend-retries|resume-timer|resume-retries|capability-update-timer|capability-update-retries) <0-255>'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='cell' doc='Cell / BSSGP' /> |
| <param name='timer' doc='Cell/BSSGP Timer' /> |
| <param name='blocking-timer' doc='Tbvc-block timeout' /> |
| <param name='blocking-retries' doc='Tbvc-block retries' /> |
| <param name='unblocking-retries' doc='Tbvc-unblock retries' /> |
| <param name='reset-timer' doc='Tbvcc-reset timeout' /> |
| <param name='reset-retries' doc='Tbvc-reset retries' /> |
| <param name='suspend-timer' doc='Tbvc-suspend timeout' /> |
| <param name='suspend-retries' doc='Tbvc-suspend retries' /> |
| <param name='resume-timer' doc='Tbvc-resume timeout' /> |
| <param name='resume-retries' doc='Tbvc-resume retries' /> |
| <param name='capability-update-timer' doc='Tbvc-capa-update timeout' /> |
| <param name='capability-update-retries' doc='Tbvc-capa-update retries' /> |
| <param name='<0-255>' doc='Timer Value' /> |
| </params> |
| </command> |
| <command id='gprs nsei <0-65535>'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='nsei' doc='GPRS NS Entity Identifier' /> |
| <param name='<0-65535>' doc='GPRS NS Entity Identifier' /> |
| </params> |
| </command> |
| <command id='gprs nsvc <0-1> nsvci <0-65535>'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' /> |
| <param name='<0-1>' doc='NSVC Logical Number' /> |
| <param name='nsvci' doc='NS Virtual Connection Identifier' /> |
| <param name='<0-65535>' doc='GPRS NS VC Identifier' /> |
| </params> |
| </command> |
| <command id='gprs nsvc <0-1> local udp port <0-65535>'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' /> |
| <param name='<0-1>' doc='NSVC Logical Number' /> |
| <param name='local' doc='GPRS NS Local UDP Port' /> |
| <param name='udp' doc='GPRS NS Local UDP Port' /> |
| <param name='port' doc='GPRS NS Local UDP Port' /> |
| <param name='<0-65535>' doc='GPRS NS Local UDP Port Number' /> |
| </params> |
| </command> |
| <command id='gprs nsvc <0-1> remote udp port <0-65535>'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' /> |
| <param name='<0-1>' doc='NSVC Logical Number' /> |
| <param name='remote' doc='GPRS NS Remote UDP Port' /> |
| <param name='udp' doc='GPRS NS Remote UDP Port' /> |
| <param name='port' doc='GPRS NS Remote UDP Port' /> |
| <param name='<0-65535>' doc='GPRS NS Remote UDP Port Number' /> |
| </params> |
| </command> |
| <command id='gprs nsvc <0-1> remote ip A.B.C.D'> |
| <params> |
| <param name='gprs' doc='GPRS Packet Network' /> |
| <param name='nsvc' doc='Network Service Virtual Connection (NS-VC)' /> |
| <param name='<0-1>' doc='NSVC Logical Number' /> |
| <param name='remote' doc='GPRS NS Remote IP Address' /> |
| <param name='ip' doc='GPRS NS Remote IP Address' /> |
| <param name='A.B.C.D' doc='GPRS NS Remote IP Address' /> |
| </params> |
| </command> |
| <command id='paging free <-1-1024>'> |
| <params> |
| <param name='paging' doc='Paging options' /> |
| <param name='free' doc='Only page when having a certain amount of free slots' /> |
| <param name='<-1-1024>' doc='amount of required free paging slots. -1 to disable' /> |
| </params> |
| </command> |
| <command id='system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) mode (static|computed)'> |
| <params> |
| <param name='system-information' doc='System Information Messages' /> |
| <param name='1' doc='System Information Type 1' /> |
| <param name='2' doc='System Information Type 2' /> |
| <param name='3' doc='System Information Type 3' /> |
| <param name='4' doc='System Information Type 4' /> |
| <param name='5' doc='System Information Type 5' /> |
| <param name='6' doc='System Information Type 6' /> |
| <param name='7' doc='System Information Type 7' /> |
| <param name='8' doc='System Information Type 8' /> |
| <param name='9' doc='System Information Type 9' /> |
| <param name='10' doc='System Information Type 10' /> |
| <param name='13' doc='System Information Type 13' /> |
| <param name='16' doc='System Information Type 16' /> |
| <param name='17' doc='System Information Type 17' /> |
| <param name='18' doc='System Information Type 18' /> |
| <param name='19' doc='System Information Type 19' /> |
| <param name='20' doc='System Information Type 20' /> |
| <param name='2bis' doc='System Information Type 2bis' /> |
| <param name='2ter' doc='System Information Type 2ter' /> |
| <param name='2quater' doc='System Information Type 2quater' /> |
| <param name='5bis' doc='System Information Type 5bis' /> |
| <param name='5ter' doc='System Information Type 5ter' /> |
| <param name='mode' doc='System Information Mode' /> |
| <param name='static' doc='Static user-specified' /> |
| <param name='computed' doc='Dynamic, BSC-computed' /> |
| </params> |
| </command> |
| <command id='system-information (1|2|3|4|5|6|7|8|9|10|13|16|17|18|19|20|2bis|2ter|2quater|5bis|5ter) static HEXSTRING'> |
| <params> |
| <param name='system-information' doc='System Information Messages' /> |
| <param name='1' doc='System Information Type 1' /> |
| <param name='2' doc='System Information Type 2' /> |
| <param name='3' doc='System Information Type 3' /> |
| <param name='4' doc='System Information Type 4' /> |
| <param name='5' doc='System Information Type 5' /> |
| <param name='6' doc='System Information Type 6' /> |
| <param name='7' doc='System Information Type 7' /> |
| <param name='8' doc='System Information Type 8' /> |
| <param name='9' doc='System Information Type 9' /> |
| <param name='10' doc='System Information Type 10' /> |
| <param name='13' doc='System Information Type 13' /> |
| <param name='16' doc='System Information Type 16' /> |
| <param name='17' doc='System Information Type 17' /> |
| <param name='18' doc='System Information Type 18' /> |
| <param name='19' doc='System Information Type 19' /> |
| <param name='20' doc='System Information Type 20' /> |
| <param name='2bis' doc='System Information Type 2bis' /> |
| <param name='2ter' doc='System Information Type 2ter' /> |
| <param name='2quater' doc='System Information Type 2quater' /> |
| <param name='5bis' doc='System Information Type 5bis' /> |
| <param name='5ter' doc='System Information Type 5ter' /> |
| <param name='static' doc='Static System Information filling' /> |
| <param name='HEXSTRING' doc='Static user-specified SI content in HEX notation' /> |
| </params> |
| </command> |
| <command id='system-information unused-send-empty'> |
| <params> |
| <param name='system-information' doc='System Information Messages' /> |
| <param name='unused-send-empty' doc='Send BCCH Info with empty 'Full BCCH Info' TLV to notify disabled SI. Some nanoBTS fw versions are known to fail upon receival of these messages.' /> |
| </params> |
| </command> |
| <command id='no system-information unused-send-empty'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='system-information' doc='System Information Messages' /> |
| <param name='unused-send-empty' doc='Avoid sending BCCH Info with empty 'Full BCCH Info' TLV to notify disabled SI. Some nanoBTS fw versions are known to fail upon receival of these messages.' /> |
| </params> |
| </command> |
| <command id='early-classmark-sending (allowed|forbidden)'> |
| <params> |
| <param name='early-classmark-sending' doc='Early Classmark Sending' /> |
| <param name='allowed' doc='Early Classmark Sending is allowed' /> |
| <param name='forbidden' doc='Early Classmark Sending is forbidden' /> |
| </params> |
| </command> |
| <command id='early-classmark-sending-3g (allowed|forbidden)'> |
| <params> |
| <param name='early-classmark-sending-3g' doc='3G Early Classmark Sending' /> |
| <param name='allowed' doc='3G Early Classmark Sending is allowed' /> |
| <param name='forbidden' doc='3G Early Classmark Sending is forbidden' /> |
| </params> |
| </command> |
| <command id='neighbor-list mode (automatic|manual|manual-si5)'> |
| <params> |
| <param name='neighbor-list' doc='Neighbor List' /> |
| <param name='mode' doc='Mode of Neighbor List generation' /> |
| <param name='automatic' doc='Automatically from all BTS in this BSC' /> |
| <param name='manual' doc='Manual' /> |
| <param name='manual-si5' doc='Manual with different lists for SI2 and SI5' /> |
| </params> |
| </command> |
| <command id='neighbor-list (add|del) arfcn <0-1023>'> |
| <params> |
| <param name='neighbor-list' doc='Neighbor List' /> |
| <param name='add' doc='Add to manual neighbor list' /> |
| <param name='del' doc='Delete from manual neighbor list' /> |
| <param name='arfcn' doc='ARFCN of neighbor' /> |
| <param name='<0-1023>' doc='ARFCN of neighbor' /> |
| </params> |
| </command> |
| <command id='si5 neighbor-list (add|del) arfcn <0-1023>'> |
| <params> |
| <param name='si5' doc='SI5 Neighbor List' /> |
| <param name='neighbor-list' doc='SI5 Neighbor List' /> |
| <param name='add' doc='Add to manual SI5 neighbor list' /> |
| <param name='del' doc='Delete from SI5 manual neighbor list' /> |
| <param name='arfcn' doc='ARFCN of neighbor' /> |
| <param name='<0-1023>' doc='ARFCN of neighbor' /> |
| </params> |
| </command> |
| <command id='si2quater neighbor-list add earfcn <0-65535> thresh-hi <0-31> thresh-lo <0-32> prio <0-8> qrxlv <0-32> meas <0-8>'> |
| <params> |
| <param name='si2quater' doc='SI2quater Neighbor List' /> |
| <param name='neighbor-list' doc='SI2quater Neighbor List' /> |
| <param name='add' doc='Add to manual SI2quater neighbor list' /> |
| <param name='earfcn' doc='EARFCN of neighbor' /> |
| <param name='<0-65535>' doc='EARFCN of neighbor' /> |
| <param name='thresh-hi' doc='threshold high bits' /> |
| <param name='<0-31>' doc='threshold high bits' /> |
| <param name='thresh-lo' doc='threshold low bits' /> |
| <param name='<0-32>' doc='threshold low bits (32 means NA)' /> |
| <param name='prio' doc='priority' /> |
| <param name='<0-8>' doc='priority (8 means NA)' /> |
| <param name='qrxlv' doc='QRXLEVMIN' /> |
| <param name='<0-32>' doc='QRXLEVMIN (32 means NA)' /> |
| <param name='meas' doc='measurement bandwidth' /> |
| <param name='<0-8>' doc='measurement bandwidth (8 means NA)' /> |
| </params> |
| </command> |
| <command id='si2quater neighbor-list del earfcn <0-65535>'> |
| <params> |
| <param name='si2quater' doc='SI2quater Neighbor List' /> |
| <param name='neighbor-list' doc='SI2quater Neighbor List' /> |
| <param name='del' doc='Delete from SI2quater manual neighbor list' /> |
| <param name='earfcn' doc='EARFCN of neighbor' /> |
| <param name='<0-65535>' doc='EARFCN' /> |
| </params> |
| </command> |
| <command id='si2quater neighbor-list add uarfcn <0-16383> <0-511> <0-1>'> |
| <params> |
| <param name='si2quater' doc='SI2quater Neighbor List' /> |
| <param name='neighbor-list' doc='SI2quater Neighbor List' /> |
| <param name='add' doc='Add to manual SI2quater neighbor list' /> |
| <param name='uarfcn' doc='UARFCN of neighbor' /> |
| <param name='<0-16383>' doc='UARFCN of neighbor' /> |
| <param name='<0-511>' doc='scrambling code' /> |
| <param name='<0-1>' doc='diversity bit' /> |
| </params> |
| </command> |
| <command id='si2quater neighbor-list del uarfcn <0-16383> <0-511>'> |
| <params> |
| <param name='si2quater' doc='SI2quater Neighbor List' /> |
| <param name='neighbor-list' doc='SI2quater Neighbor List' /> |
| <param name='del' doc='Delete from SI2quater manual neighbor list' /> |
| <param name='uarfcn' doc='UARFCN of neighbor' /> |
| <param name='<0-16383>' doc='UARFCN' /> |
| <param name='<0-511>' doc='scrambling code' /> |
| </params> |
| </command> |
| <command id='rf-lock-exclude'> |
| <params> |
| <param name='rf-lock-exclude' doc='Exclude this BTS from the global RF Lock' /> |
| </params> |
| </command> |
| <command id='no rf-lock-exclude'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='rf-lock-exclude' doc='Exclude this BTS from the global RF Lock' /> |
| </params> |
| </command> |
| <command id='force-combined-si'> |
| <params> |
| <param name='force-combined-si' doc='Force the generation of a single SI (no ter/bis)' /> |
| </params> |
| </command> |
| <command id='no force-combined-si'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='force-combined-si' doc='Force the generation of a single SI (no ter/bis)' /> |
| </params> |
| </command> |
| <command id='codec-support fr'> |
| <params> |
| <param name='codec-support' doc='Codec Support settings' /> |
| <param name='fr' doc='Fullrate' /> |
| </params> |
| </command> |
| <command id='codec-support fr (hr|efr|amr)'> |
| <params> |
| <param name='codec-support' doc='Codec Support settings' /> |
| <param name='fr' doc='Fullrate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| </params> |
| </command> |
| <command id='codec-support fr (hr|efr|amr) (hr|efr|amr)'> |
| <params> |
| <param name='codec-support' doc='Codec Support settings' /> |
| <param name='fr' doc='Fullrate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| </params> |
| </command> |
| <command id='codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)'> |
| <params> |
| <param name='codec-support' doc='Codec Support settings' /> |
| <param name='fr' doc='Fullrate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| </params> |
| </command> |
| <command id='codec-support fr (hr|efr|amr) (hr|efr|amr) (hr|efr|amr) (hr|efr|amr)'> |
| <params> |
| <param name='codec-support' doc='Codec Support settings' /> |
| <param name='fr' doc='Fullrate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| <param name='hr' doc='Half Rate' /> |
| <param name='efr' doc='Enhanced Full Rate' /> |
| <param name='amr' doc='Adaptive Multirate' /> |
| </params> |
| </command> |
| <command id='depends-on-bts <0-255>'> |
| <params> |
| <param name='depends-on-bts' doc='This BTS can only be started if another one is up' /> |
| <param name='<0-255>' doc='BTS Number' /> |
| </params> |
| </command> |
| <command id='depeneds-on-bts <0-255>'> |
| <params> |
| <param name='depeneds-on-bts' doc='Negate a command or set its defaults' /> |
| <param name='<0-255>' doc='This BTS can only be started if another one is up' /> |
| </params> |
| </command> |
| <command id='amr tch-f modes (0|1|2|3|4|5|6|7)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='modes' doc='Codec modes to use with AMR codec' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| </params> |
| </command> |
| <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='modes' doc='Codec modes to use with AMR codec' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| </params> |
| </command> |
| <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='modes' doc='Codec modes to use with AMR codec' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| </params> |
| </command> |
| <command id='amr tch-f modes (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7) (0|1|2|3|4|5|6|7)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='modes' doc='Codec modes to use with AMR codec' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='6' doc='10,2k' /> |
| <param name='7' doc='12,2k' /> |
| </params> |
| </command> |
| <command id='amr tch-f threshold (ms|bts) <0-63>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='threshold' doc='AMR threshold between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-f threshold (ms|bts) <0-63> <0-63>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='threshold' doc='AMR threshold between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-f threshold (ms|bts) <0-63> <0-63> <0-63>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='threshold' doc='AMR threshold between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-f hysteresis (ms|bts) <0-15>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='hysteresis' doc='AMR hysteresis between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-f hysteresis (ms|bts) <0-15> <0-15>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='hysteresis' doc='AMR hysteresis between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-f hysteresis (ms|bts) <0-15> <0-15> <0-15>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='hysteresis' doc='AMR hysteresis between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-f start-mode (auto|1|2|3|4)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-f' doc='Full Rate' /> |
| <param name='start-mode' doc='Initial codec to use with AMR' /> |
| <param name='auto' doc='Automatically' /> |
| <param name='1' doc='First codec' /> |
| <param name='2' doc='Second codec' /> |
| <param name='3' doc='Third codec' /> |
| <param name='4' doc='Fourth codec' /> |
| </params> |
| </command> |
| <command id='amr tch-h modes (0|1|2|3|4|5)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='modes' doc='Codec modes to use with AMR codec' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| </params> |
| </command> |
| <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='modes' doc='Codec modes to use with AMR codec' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| </params> |
| </command> |
| <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='modes' doc='Codec modes to use with AMR codec' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| </params> |
| </command> |
| <command id='amr tch-h modes (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5) (0|1|2|3|4|5)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='modes' doc='Codec modes to use with AMR codec' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| <param name='0' doc='4,75k' /> |
| <param name='1' doc='5,15k' /> |
| <param name='2' doc='5,90k' /> |
| <param name='3' doc='6,70k' /> |
| <param name='4' doc='7,40k' /> |
| <param name='5' doc='7,95k' /> |
| </params> |
| </command> |
| <command id='amr tch-h threshold (ms|bts) <0-63>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='threshold' doc='AMR threshold between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-h threshold (ms|bts) <0-63> <0-63>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='threshold' doc='AMR threshold between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-h threshold (ms|bts) <0-63> <0-63> <0-63>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='threshold' doc='AMR threshold between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| <param name='<0-63>' doc='Threshold between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-h hysteresis (ms|bts) <0-15>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='hysteresis' doc='AMR hysteresis between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-h hysteresis (ms|bts) <0-15> <0-15>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='hysteresis' doc='AMR hysteresis between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-h hysteresis (ms|bts) <0-15> <0-15> <0-15>'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='hysteresis' doc='AMR hysteresis between codecs' /> |
| <param name='ms' doc='MS side' /> |
| <param name='bts' doc='BTS side' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| <param name='<0-15>' doc='Hysteresis between codec 1 and 2' /> |
| </params> |
| </command> |
| <command id='amr tch-h start-mode (auto|1|2|3|4)'> |
| <params> |
| <param name='amr' doc='Adaptive Multi Rate settings' /> |
| <param name='tch-h' doc='Half Rate' /> |
| <param name='start-mode' doc='Initial codec to use with AMR' /> |
| <param name='auto' doc='Automatically' /> |
| <param name='1' doc='First codec' /> |
| <param name='2' doc='Second codec' /> |
| <param name='3' doc='Third codec' /> |
| <param name='4' doc='Fourth codec' /> |
| </params> |
| </command> |
| <command id='pcu-socket PATH'> |
| <params> |
| <param name='pcu-socket' doc='PCU Socket Path for using OsmoPCU co-located with BSC (legacy BTS)' /> |
| <param name='PATH' doc='Path in the file system for the unix-domain PCU socket' /> |
| </params> |
| </command> |
| <command id='access-control-class-ramping'> |
| <params> |
| <param name='access-control-class-ramping' doc='Enable Access Control Class ramping' /> |
| </params> |
| </command> |
| <command id='no access-control-class-ramping'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='access-control-class-ramping' doc='Disable Access Control Class ramping' /> |
| </params> |
| </command> |
| <command id='access-control-class-ramping-step-interval (<30-600>|dynamic)'> |
| <params> |
| <param name='access-control-class-ramping-step-interval' doc='Configure Access Control Class ramping step interval' /> |
| <param name='<30-600>' doc='Set a fixed step interval (in seconds)' /> |
| <param name='dynamic' doc='Use dynamic step interval based on BTS channel load' /> |
| </params> |
| </command> |
| <command id='access-control-class-ramping-step-size (<1-10>)'> |
| <params> |
| <param name='access-control-class-ramping-step-size' doc='Configure Access Control Class ramping step size' /> |
| <param name='<1-10>' doc='Set the number of Access Control Classes to enable per ramping step' /> |
| </params> |
| </command> |
| <command id='timer-dynamic TNNNN'> |
| <params> |
| <param name='timer-dynamic' doc='Calculate T3113 dynamically based on channel config and load' /> |
| <param name='TNNNN' doc='T-number, optionally preceded by 't' or 'T'' /> |
| </params> |
| </command> |
| <command id='no timer-dynamic TNNNN'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='timer-dynamic' doc='Set given timer to non-dynamic and use the default or user provided fixed value' /> |
| <param name='TNNNN' doc='T-number, optionally preceded by 't' or 'T'' /> |
| </params> |
| </command> |
| <command id='neighbor bts <0-255>'> |
| <params> |
| <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /> |
| <param name='bts' doc='Add Neighbor cell by local BTS number' /> |
| <param name='<0-255>' doc='BTS number' /> |
| </params> |
| </command> |
| <command id='neighbor lac <0-65535>'> |
| <params> |
| <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /> |
| <param name='lac' doc='Add Neighbor cell by LAC' /> |
| <param name='<0-65535>' doc='LAC' /> |
| </params> |
| </command> |
| <command id='neighbor lac-ci <0-65535> <0-65535>'> |
| <params> |
| <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /> |
| <param name='lac-ci' doc='Add Neighbor cell by LAC and CI' /> |
| <param name='<0-65535>' doc='LAC' /> |
| <param name='<0-65535>' doc='CI' /> |
| </params> |
| </command> |
| <command id='neighbor cgi <0-999> <0-999> <0-65535> <0-65535>'> |
| <params> |
| <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /> |
| <param name='cgi' doc='Add Neighbor cell by cgi' /> |
| <param name='<0-999>' doc='MCC' /> |
| <param name='<0-999>' doc='MNC' /> |
| <param name='<0-65535>' doc='LAC' /> |
| <param name='<0-65535>' doc='CI' /> |
| </params> |
| </command> |
| <command id='neighbor lac <0-65535> arfcn <0-1023> bsic (<0-63>|any)'> |
| <params> |
| <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /> |
| <param name='lac' doc='Add Neighbor cell by LAC' /> |
| <param name='<0-65535>' doc='LAC' /> |
| <param name='arfcn' doc='ARFCN of neighbor cell' /> |
| <param name='<0-1023>' doc='ARFCN value' /> |
| <param name='bsic' doc='BSIC of neighbor cell' /> |
| <param name='<0-63>' doc='BSIC value' /> |
| <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /> |
| </params> |
| </command> |
| <command id='neighbor lac-ci <0-65535> <0-65535> arfcn <0-1023> bsic (<0-63>|any)'> |
| <params> |
| <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /> |
| <param name='lac-ci' doc='Add Neighbor cell by LAC and CI' /> |
| <param name='<0-65535>' doc='LAC' /> |
| <param name='<0-65535>' doc='CI' /> |
| <param name='arfcn' doc='ARFCN of neighbor cell' /> |
| <param name='<0-1023>' doc='ARFCN value' /> |
| <param name='bsic' doc='BSIC of neighbor cell' /> |
| <param name='<0-63>' doc='BSIC value' /> |
| <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /> |
| </params> |
| </command> |
| <command id='neighbor cgi <0-999> <0-999> <0-65535> <0-65535> arfcn <0-1023> bsic (<0-63>|any)'> |
| <params> |
| <param name='neighbor' doc='Manage local and remote-BSS neighbor cells' /> |
| <param name='cgi' doc='Add Neighbor cell by cgi' /> |
| <param name='<0-999>' doc='MCC' /> |
| <param name='<0-999>' doc='MNC' /> |
| <param name='<0-65535>' doc='LAC' /> |
| <param name='<0-65535>' doc='CI' /> |
| <param name='arfcn' doc='ARFCN of neighbor cell' /> |
| <param name='<0-1023>' doc='ARFCN value' /> |
| <param name='bsic' doc='BSIC of neighbor cell' /> |
| <param name='<0-63>' doc='BSIC value' /> |
| <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /> |
| </params> |
| </command> |
| <command id='no neighbor bts <0-255>'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='neighbor' doc='Remove local or remote-BSS neighbor cell' /> |
| <param name='bts' doc='Neighbor cell by local BTS number' /> |
| <param name='<0-255>' doc='BTS number' /> |
| </params> |
| </command> |
| <command id='no neighbor arfcn <0-1023> bsic (<0-63>|any)'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='neighbor' doc='Remove local or remote-BSS neighbor cell' /> |
| <param name='arfcn' doc='ARFCN of neighbor cell' /> |
| <param name='<0-1023>' doc='ARFCN value' /> |
| <param name='bsic' doc='BSIC of neighbor cell' /> |
| <param name='<0-63>' doc='BSIC value' /> |
| <param name='any' doc='for all BSICs / use any BSIC in this ARFCN' /> |
| </params> |
| </command> |
| <command id='trx <0-255>'> |
| <params> |
| <param name='trx' doc='Radio Transceiver' /> |
| <param name='<0-255>' doc='Select a TRX to configure' /> |
| </params> |
| </command> |
| <command id='is-connection-list (add|del) <0-2047> <0-2047> <0-255>'> |
| <params> |
| <param name='is-connection-list' doc='Interface Switch Connection List' /> |
| <param name='add' doc='Add to IS list' /> |
| <param name='del' doc='Delete from IS list' /> |
| <param name='<0-2047>' doc='ICP1' /> |
| <param name='<0-2047>' doc='ICP2' /> |
| <param name='<0-255>' doc='Contiguity Index' /> |
| </params> |
| </command> |
| <command id='abis-lower-transport (single-timeslot|super-channel)'> |
| <params> |
| <param name='abis-lower-transport' doc='Configure thee Abis Lower Transport' /> |
| <param name='single-timeslot' doc='Single Timeslot (classic Abis)' /> |
| <param name='super-channel' doc='SuperChannel (Packet Abis)' /> |
| </params> |
| </command> |
| <command id='con-connection-group <1-31>'> |
| <params> |
| <param name='con-connection-group' doc='Configure a CON (Concentrator) Connection Group' /> |
| <param name='<1-31>' doc='CON Connection Group Number' /> |
| </params> |
| </command> |
| <command id='del-connection-group <1-31>'> |
| <params> |
| <param name='del-connection-group' doc='Delete a CON (Concentrator) Connection Group' /> |
| <param name='<1-31>' doc='CON Connection Group Number' /> |
| </params> |
| </command> |
| <command id='handover (0|1|default)'> |
| <params> |
| <param name='handover' doc='Handover general config' /> |
| <param name='0' doc='Disable in-call handover' /> |
| <param name='1' doc='Enable in-call handover' /> |
| <param name='default' doc='Enable/disable handover: Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover algorithm (1|2|default)'> |
| <params> |
| <param name='handover' doc='Handover general config' /> |
| <param name='algorithm' doc='Choose algorithm for handover decision' /> |
| <param name='1' doc='Algorithm 1: trigger handover based on comparing current cell and neighbor RxLev and RxQual, only.' /> |
| <param name='2' doc='Algorithm 2: trigger handover on RxLev/RxQual, and also to balance the load across several cells. Consider available codecs. Prevent repeated handover by penalty timers.' /> |
| <param name='default' doc='Use default (1), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 window rxlev averaging (<1-10>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxlev' doc='Received-Level averaging' /> |
| <param name='averaging' doc='How many RxLev measurements are used for averaging' /> |
| <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (10), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 window rxqual averaging (<1-10>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxqual' doc='Received-Quality averaging' /> |
| <param name='averaging' doc='How many RxQual measurements are used for averaging' /> |
| <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (1), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 window rxlev neighbor averaging (<1-10>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxlev' doc='Received-Level averaging' /> |
| <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /> |
| <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /> |
| <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (10), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 power budget interval (<1-99>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='power' doc='Neighbor cell power triggering' /> |
| <param name='budget' doc='Neighbor cell power triggering' /> |
| <param name='interval' doc='How often to check for a better cell (SACCH frames)' /> |
| <param name='<1-99>' doc='Check for stronger neighbor every N number of SACCH frames' /> |
| <param name='default' doc='Use default (6), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 power budget hysteresis (<0-999>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='power' doc='Neighbor cell power triggering' /> |
| <param name='budget' doc='Neighbor cell power triggering' /> |
| <param name='hysteresis' doc='How many dB stronger must a neighbor be to become a HO candidate' /> |
| <param name='<0-999>' doc='Neighbor's strength difference in dB' /> |
| <param name='default' doc='Use default (3), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover1 maximum distance (<0-9999>|default)'> |
| <params> |
| <param name='handover1' doc='Handover options for handover decision algorithm 1' /> |
| <param name='maximum' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='distance' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='<0-9999>' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='default' doc='Use default (9999), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 window rxlev averaging (<1-10>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxlev' doc='Received-Level averaging' /> |
| <param name='averaging' doc='How many RxLev measurements are used for averaging' /> |
| <param name='<1-10>' doc='RxLev averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (10), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 window rxqual averaging (<1-10>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxqual' doc='Received-Quality averaging' /> |
| <param name='averaging' doc='How many RxQual measurements are used for averaging' /> |
| <param name='<1-10>' doc='RxQual averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (1), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 window rxlev neighbor averaging (<1-10>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='window' doc='Measurement averaging settings' /> |
| <param name='rxlev' doc='Received-Level averaging' /> |
| <param name='neighbor' doc='How many Neighbor RxLev measurements are used for averaging' /> |
| <param name='averaging' doc='How many Neighbor RxLev measurements are used for averaging' /> |
| <param name='<1-10>' doc='Neighbor RxLev averaging: Number of values to average over' /> |
| <param name='default' doc='Use default (10), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 power budget interval (<1-99>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='power' doc='Neighbor cell power triggering' /> |
| <param name='budget' doc='Neighbor cell power triggering' /> |
| <param name='interval' doc='How often to check for a better cell (SACCH frames)' /> |
| <param name='<1-99>' doc='Check for stronger neighbor every N number of SACCH frames' /> |
| <param name='default' doc='Use default (6), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 power budget hysteresis (<0-999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='power' doc='Neighbor cell power triggering' /> |
| <param name='budget' doc='Neighbor cell power triggering' /> |
| <param name='hysteresis' doc='How many dB stronger must a neighbor be to become a HO candidate' /> |
| <param name='<0-999>' doc='Neighbor's strength difference in dB' /> |
| <param name='default' doc='Use default (3), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 maximum distance (<0-9999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='maximum' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='distance' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='<0-9999>' doc='Maximum Timing-Advance value (i.e. MS distance) before triggering HO' /> |
| <param name='default' doc='Use default (9999), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 assignment (0|1|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='assignment' doc='Enable or disable in-call channel re-assignment' /> |
| <param name='0' doc='Disable in-call assignment' /> |
| <param name='1' doc='Enable in-call assignment' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 tdma-measurement (full|subset|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='tdma-measurement' doc='Define measurement set of TDMA frames' /> |
| <param name='full' doc='Full set of 102/104 TDMA frames' /> |
| <param name='subset' doc='Sub set of 4 TDMA frames (SACCH)' /> |
| <param name='default' doc='Use default (subset), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 min rxlev (<-110--50>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /> |
| <param name='rxlev' doc='How weak may RxLev of an MS become before triggering HO' /> |
| <param name='<-110--50>' doc='minimum RxLev (dBm)' /> |
| <param name='default' doc='Use default (-100), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 min rxqual (<0-7>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='min' doc='Minimum Level/Quality thresholds before triggering HO' /> |
| <param name='rxqual' doc='How bad may RxQual of an MS become before triggering HO' /> |
| <param name='<0-7>' doc='minimum RxQual' /> |
| <param name='default' doc='Use default (5), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 afs-bias rxlev (<0-20>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs' /> |
| <param name='rxlev' doc='RxLev improvement bias for AFS over other codecs' /> |
| <param name='<0-20>' doc='Virtual RxLev improvement (dB)' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 afs-bias rxqual (<0-7>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='afs-bias' doc='Configure bias to prefer AFS (AMR on TCH/F) over other codecs' /> |
| <param name='rxqual' doc='RxQual improvement bias for AFS over other codecs' /> |
| <param name='<0-7>' doc='Virtual RxQual improvement' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 min-free-slots tch/f (<0-9999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested' /> |
| <param name='tch/f' doc='Minimum free TCH/F timeslots before cell is considered congested' /> |
| <param name='<0-9999>' doc='Number of TCH/F slots' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 min-free-slots tch/h (<0-9999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='min-free-slots' doc='Minimum free TCH timeslots before cell is considered congested' /> |
| <param name='tch/h' doc='Minimum free TCH/H timeslots before cell is considered congested' /> |
| <param name='<0-9999>' doc='Number of TCH/H slots' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 max-handovers (<1-9999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='max-handovers' doc='Maximum number of concurrent handovers allowed per cell' /> |
| <param name='<1-9999>' doc='Number' /> |
| <param name='default' doc='Use default (9999), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 penalty-time max-distance (<0-99999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> |
| <param name='max-distance' doc='Time to suspend handovers after leaving this cell due to exceeding max distance' /> |
| <param name='<0-99999>' doc='Seconds' /> |
| <param name='default' doc='Use default (300), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 penalty-time failed-ho (<0-99999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> |
| <param name='failed-ho' doc='Time to suspend handovers after handover failure to this cell' /> |
| <param name='<0-99999>' doc='Seconds' /> |
| <param name='default' doc='Use default (60), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 penalty-time failed-assignment (<0-99999>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='penalty-time' doc='Set penalty times to wait between repeated handovers' /> |
| <param name='failed-assignment' doc='Time to suspend handovers after assignment failure in this cell' /> |
| <param name='<0-99999>' doc='Seconds' /> |
| <param name='default' doc='Use default (60), remove explicit setting on this node' /> |
| </params> |
| </command> |
| <command id='handover2 retries (<0-9>|default)'> |
| <params> |
| <param name='handover2' doc='Handover options for handover decision algorithm 2' /> |
| <param name='retries' doc='Immediately retry on handover/assignment failure' /> |
| <param name='<0-9>' doc='Number of retries' /> |
| <param name='default' doc='Use default (0), remove explicit setting on this node' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-net-bts-trx'> |
| <name>config-net-bts-trx</name> |
| <command id='arfcn <0-1023>'> |
| <params> |
| <param name='arfcn' doc='Set the ARFCN for this TRX' /> |
| <param name='<0-1023>' doc='Absolute Radio Frequency Channel Number' /> |
| </params> |
| </command> |
| <command id='description .TEXT'> |
| <params> |
| <param name='description' doc='Save human-readable description of the object' /> |
| <param name='.TEXT' doc='Text until the end of the line' /> |
| </params> |
| </command> |
| <command id='no description'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='description' doc='Remove description of the object' /> |
| </params> |
| </command> |
| <command id='nominal power <0-100>'> |
| <params> |
| <param name='nominal' doc='Nominal TRX RF Power in dBm' /> |
| <param name='power' doc='Nominal TRX RF Power in dBm' /> |
| <param name='<0-100>' doc='Nominal TRX RF Power in dBm' /> |
| </params> |
| </command> |
| <command id='max_power_red <0-100>'> |
| <params> |
| <param name='max_power_red' doc='Reduction of maximum BS RF Power (relative to nominal power)' /> |
| <param name='<0-100>' doc='Reduction of maximum BS RF Power in dB' /> |
| </params> |
| </command> |
| <command id='rsl e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)'> |
| <params> |
| <param name='rsl' doc='RSL Parameters' /> |
| <param name='e1' doc='E1/T1 interface to be used for RSL' /> |
| <param name='line' doc='E1/T1 interface to be used for RSL' /> |
| <param name='E1_LINE' doc='E1/T1 Line Number to be used for RSL' /> |
| <param name='timeslot' doc='E1/T1 Timeslot to be used for RSL' /> |
| <param name='<1-31>' doc='E1/T1 Timeslot to be used for RSL' /> |
| <param name='sub-slot' doc='E1/T1 Sub-slot to be used for RSL' /> |
| <param name='0' doc='E1/T1 Sub-slot 0 is to be used for RSL' /> |
| <param name='1' doc='E1/T1 Sub-slot 1 is to be used for RSL' /> |
| <param name='2' doc='E1/T1 Sub-slot 2 is to be used for RSL' /> |
| <param name='3' doc='E1/T1 Sub-slot 3 is to be used for RSL' /> |
| <param name='full' doc='E1/T1 full timeslot is to be used for RSL' /> |
| </params> |
| </command> |
| <command id='rsl e1 tei <0-63>'> |
| <params> |
| <param name='rsl' doc='RSL Parameters' /> |
| <param name='e1' doc='Set the TEI to be used for RSL' /> |
| <param name='tei' doc='Set the TEI to be used for RSL' /> |
| <param name='<0-63>' doc='TEI to be used for RSL' /> |
| </params> |
| </command> |
| <command id='rf_locked (0|1)'> |
| <params> |
| <param name='rf_locked' doc='Set or unset the RF Locking (Turn off RF of the TRX)' /> |
| <param name='0' doc='TRX is NOT RF locked (active)' /> |
| <param name='1' doc='TRX is RF locked (turned off)' /> |
| </params> |
| </command> |
| <command id='timeslot <0-7>'> |
| <params> |
| <param name='timeslot' doc='Select a Timeslot to configure' /> |
| <param name='<0-7>' doc='Timeslot number' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-net-bts-trx-ts'> |
| <name>config-net-bts-trx-ts</name> |
| <command id='phys_chan_config (none|ccch|ccch+sdcch4|tch/f|tch/h|sdcch8|pdch|tch/f_pdch|unknown|ccch+sdcch4+cbch|sdcch8+cbch|tch/f_tch/h_pdch)'> |
| <params> |
| <param name='phys_chan_config' doc='Physical Channel Combination' /> |
| <param name='none' doc='Physical Channel not configured' /> |
| <param name='ccch' doc='FCCH + SCH + BCCH + CCCH (Comb. IV)' /> |
| <param name='ccch+sdcch4' doc='FCCH + SCH + BCCH + CCCH + 4 SDCCH + 2 SACCH (Comb. V)' /> |
| <param name='tch/f' doc='TCH/F + FACCH/F + SACCH (Comb. I)' /> |
| <param name='tch/h' doc='2 TCH/H + 2 FACCH/H + 2 SACCH (Comb. II)' /> |
| <param name='sdcch8' doc='8 SDCCH + 4 SACCH (Comb. VII)' /> |
| <param name='pdch' doc='Packet Data Channel for GPRS/EDGE' /> |
| <param name='tch/f_pdch' doc='Dynamic TCH/F or GPRS PDCH' /> |
| <param name='unknown' doc='Unknown / Unsupported channel combination' /> |
| <param name='ccch+sdcch4+cbch' doc='FCCH + SCH + BCCH + CCCH + CBCH + 3 SDCCH + 2 SACCH (Comb. V)' /> |
| <param name='sdcch8+cbch' doc='7 SDCCH + 4 SACCH + CBCH (Comb. VII)' /> |
| <param name='tch/f_tch/h_pdch' doc='Dynamic TCH/F or TCH/H or GPRS PDCH' /> |
| </params> |
| </command> |
| <command id='training_sequence_code <0-7>'> |
| <params> |
| <param name='training_sequence_code' doc='Training Sequence Code of the Timeslot' /> |
| <param name='<0-7>' doc='TSC' /> |
| </params> |
| </command> |
| <command id='hopping enabled (0|1)'> |
| <params> |
| <param name='hopping' doc='Configure frequency hopping' /> |
| <param name='enabled' doc='Enable or disable frequency hopping' /> |
| <param name='0' doc='Disable frequency hopping' /> |
| <param name='1' doc='Enable frequency hopping' /> |
| </params> |
| </command> |
| <command id='hopping sequence-number <0-63>'> |
| <params> |
| <param name='hopping' doc='Configure frequency hopping' /> |
| <param name='sequence-number' doc='Which hopping sequence to use for this channel' /> |
| <param name='<0-63>' doc='Hopping Sequence Number (HSN)' /> |
| </params> |
| </command> |
| <command id='hopping maio <0-63>'> |
| <params> |
| <param name='hopping' doc='Configure frequency hopping' /> |
| <param name='maio' doc='Which hopping MAIO to use for this channel' /> |
| <param name='<0-63>' doc='Mobile Allocation Index Offset (MAIO)' /> |
| </params> |
| </command> |
| <command id='hopping arfcn add <0-1023>'> |
| <params> |
| <param name='hopping' doc='Configure frequency hopping' /> |
| <param name='arfcn' doc='Configure hopping ARFCN list' /> |
| <param name='add' doc='Add an entry to the hopping ARFCN list' /> |
| <param name='<0-1023>' doc='ARFCN' /> |
| </params> |
| </command> |
| <command id='hopping arfcn del <0-1023>'> |
| <params> |
| <param name='hopping' doc='Configure frequency hopping' /> |
| <param name='arfcn' doc='Configure hopping ARFCN list' /> |
| <param name='del' doc='Delete an entry to the hopping ARFCN list' /> |
| <param name='<0-1023>' doc='ARFCN' /> |
| </params> |
| </command> |
| <command id='e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full)'> |
| <params> |
| <param name='e1' doc='E1/T1 channel connected to this on-air timeslot' /> |
| <param name='line' doc='E1/T1 channel connected to this on-air timeslot' /> |
| <param name='E1_LINE' doc='E1/T1 line connected to this on-air timeslot' /> |
| <param name='timeslot' doc='E1/T1 timeslot connected to this on-air timeslot' /> |
| <param name='<1-31>' doc='E1/T1 timeslot connected to this on-air timeslot' /> |
| <param name='sub-slot' doc='E1/T1 sub-slot connected to this on-air timeslot' /> |
| <param name='0' doc='E1/T1 sub-slot 0 connected to this on-air timeslot' /> |
| <param name='1' doc='E1/T1 sub-slot 1 connected to this on-air timeslot' /> |
| <param name='2' doc='E1/T1 sub-slot 2 connected to this on-air timeslot' /> |
| <param name='3' doc='E1/T1 sub-slot 3 connected to this on-air timeslot' /> |
| <param name='full' doc='Full E1/T1 timeslot connected to this on-air timeslot' /> |
| </params> |
| </command> |
| </node> |
| <node id='oml'> |
| <name>oml</name> |
| <command id='change-adm-state (locked|unlocked|shutdown|null)'> |
| <params> |
| <param name='change-adm-state' doc='Change the Administrative State' /> |
| <param name='locked' doc='Locked' /> |
| <param name='unlocked' doc='Unlocked' /> |
| <param name='shutdown' doc='Shutdown' /> |
| <param name='null' doc='NULL' /> |
| </params> |
| </command> |
| <command id='opstart'> |
| <params> |
| <param name='opstart' doc='Send an OPSTART message to the object' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-msc'> |
| <name>config-msc</name> |
| <command id='core-mobile-network-code <1-999>'> |
| <params> |
| <param name='core-mobile-network-code' doc='Use this network code for the core network' /> |
| <param name='<1-999>' doc='MNC value' /> |
| </params> |
| </command> |
| <command id='core-mobile-country-code <1-999>'> |
| <params> |
| <param name='core-mobile-country-code' doc='Use this country code for the core network' /> |
| <param name='<1-999>' doc='MCC value' /> |
| </params> |
| </command> |
| <command id='core-location-area-code <0-65535>'> |
| <params> |
| <param name='core-location-area-code' doc='Use this location area code for the core network' /> |
| <param name='<0-65535>' doc='LAC value' /> |
| </params> |
| </command> |
| <command id='core-cell-identity <0-65535>'> |
| <params> |
| <param name='core-cell-identity' doc='Use this cell identity for the core network' /> |
| <param name='<0-65535>' doc='CI value' /> |
| </params> |
| </command> |
| <command id='ip.access rtp-base <1-65000>'> |
| <params> |
| <param name='ip.access' doc='IP.ACCESS specific' /> |
| <param name='rtp-base' doc='Set the rtp-base port for the RTP stream' /> |
| <param name='<1-65000>' doc='Port number' /> |
| </params> |
| </command> |
| <command id='codec-list .LIST'> |
| <params> |
| <param name='codec-list' doc='Set the allowed audio codecs' /> |
| <param name='.LIST' doc='List of audio codecs, e.g. fr3 fr1 hr3' /> |
| </params> |
| </command> |
| <command id='bsc-welcome-text .TEXT'> |
| <params> |
| <param name='bsc-welcome-text' doc='Set the USSD notification to be sent' /> |
| <param name='.TEXT' doc='Text to be sent' /> |
| </params> |
| </command> |
| <command id='no bsc-welcome-text'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='bsc-welcome-text' doc='Clear the USSD notification to be sent' /> |
| </params> |
| </command> |
| <command id='bsc-msc-lost-text .TEXT'> |
| <params> |
| <param name='bsc-msc-lost-text' doc='Set the USSD notification to be sent on MSC connection loss' /> |
| <param name='.TEXT' doc='Text to be sent' /> |
| </params> |
| </command> |
| <command id='no bsc-msc-lost-text'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='bsc-msc-lost-text' doc='Clear the USSD notification to be sent on MSC connection loss' /> |
| </params> |
| </command> |
| <command id='bsc-grace-text .TEXT'> |
| <params> |
| <param name='bsc-grace-text' doc='Set the USSD notification to be sent when the MSC has entered the grace period' /> |
| <param name='.TEXT' doc='Text to be sent' /> |
| </params> |
| </command> |
| <command id='no bsc-grace-text'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='bsc-grace-text' doc='Clear the USSD notification to be sent when the MSC has entered the grace period' /> |
| </params> |
| </command> |
| <command id='type (normal|local)'> |
| <params> |
| <param name='type' doc='Select the MSC type' /> |
| <param name='normal' doc='Plain GSM MSC' /> |
| <param name='local' doc='Special MSC for local call routing' /> |
| </params> |
| </command> |
| <command id='allow-emergency (allow|deny)'> |
| <params> |
| <param name='allow-emergency' doc='Allow CM ServiceRequests with type emergency' /> |
| <param name='allow' doc='Allow' /> |
| <param name='deny' doc='Deny' /> |
| </params> |
| </command> |
| <command id='local-prefix REGEXP'> |
| <params> |
| <param name='local-prefix' doc='Prefix for local numbers' /> |
| <param name='REGEXP' doc='REGEXP used' /> |
| </params> |
| </command> |
| <command id='amr-config 12_2k (allowed|forbidden)'> |
| <params> |
| <param name='amr-config' doc='AMR Multirate Configuration' /> |
| <param name='12_2k' doc='Bitrate' /> |
| <param name='allowed' doc='Allowed' /> |
| <param name='forbidden' doc='Forbidden' /> |
| </params> |
| </command> |
| <command id='amr-config 10_2k (allowed|forbidden)'> |
| <params> |
| <param name='amr-config' doc='AMR Multirate Configuration' /> |
| <param name='10_2k' doc='Bitrate' /> |
| <param name='allowed' doc='Allowed' /> |
| <param name='forbidden' doc='Forbidden' /> |
| </params> |
| </command> |
| <command id='amr-config 7_95k (allowed|forbidden)'> |
| <params> |
| <param name='amr-config' doc='AMR Multirate Configuration' /> |
| <param name='7_95k' doc='Bitrate' /> |
| <param name='allowed' doc='Allowed' /> |
| <param name='forbidden' doc='Forbidden' /> |
| </params> |
| </command> |
| <command id='amr-config 7_40k (allowed|forbidden)'> |
| <params> |
| <param name='amr-config' doc='AMR Multirate Configuration' /> |
| <param name='7_40k' doc='Bitrate' /> |
| <param name='allowed' doc='Allowed' /> |
| <param name='forbidden' doc='Forbidden' /> |
| </params> |
| </command> |
| <command id='amr-config 6_70k (allowed|forbidden)'> |
| <params> |
| <param name='amr-config' doc='AMR Multirate Configuration' /> |
| <param name='6_70k' doc='Bitrate' /> |
| <param name='allowed' doc='Allowed' /> |
| <param name='forbidden' doc='Forbidden' /> |
| </params> |
| </command> |
| <command id='amr-config 5_90k (allowed|forbidden)'> |
| <params> |
| <param name='amr-config' doc='AMR Multirate Configuration' /> |
| <param name='5_90k' doc='Bitrate' /> |
| <param name='allowed' doc='Allowed' /> |
| <param name='forbidden' doc='Forbidden' /> |
| </params> |
| </command> |
| <command id='amr-config 5_15k (allowed|forbidden)'> |
| <params> |
| <param name='amr-config' doc='AMR Multirate Configuration' /> |
| <param name='5_15k' doc='Bitrate' /> |
| <param name='allowed' doc='Allowed' /> |
| <param name='forbidden' doc='Forbidden' /> |
| </params> |
| </command> |
| <command id='amr-config 4_75k (allowed|forbidden)'> |
| <params> |
| <param name='amr-config' doc='AMR Multirate Configuration' /> |
| <param name='4_75k' doc='Bitrate' /> |
| <param name='allowed' doc='Allowed' /> |
| <param name='forbidden' doc='Forbidden' /> |
| </params> |
| </command> |
| <command id='amr-payload (octet-aligned|bandwith-efficient'> |
| <params> |
| <param name='amr-payload' doc='Set AMR payload framing mode' /> |
| <param name='octet-aligned' doc='payload fields aligned on octet boundaries' /> |
| <param name='bandwith-efficient' doc='payload fields packed (AoIP)' /> |
| </params> |
| </command> |
| <command id='lcls-mode (disabled|mgw-loop|bts-loop)'> |
| <params> |
| <param name='lcls-mode' doc='Configure 3GPP LCLS (Local Call, Local Switch)' /> |
| <param name='disabled' doc='Disable LCLS for all calls of this MSC' /> |
| <param name='mgw-loop' doc='Enable LCLS with looping traffic in MGW' /> |
| <param name='bts-loop' doc='Enable LCLS with looping traffic between BTS' /> |
| </params> |
| </command> |
| <command id='lcls-codec-mismatch (allowed|forbidden)'> |
| <params> |
| <param name='lcls-codec-mismatch' doc='Allow 3GPP LCLS (Local Call, Local Switch) when call legs use different codec/rate' /> |
| <param name='allowed' doc='Allow LCLS only only for calls that use the same codec/rate on both legs' /> |
| <param name='forbidden' doc='Do not Allow LCLS for calls that use a different codec/rate on both legs' /> |
| </params> |
| </command> |
| <command id='access-list-name NAME'> |
| <params> |
| <param name='access-list-name' doc='Set the name of the access list to use.' /> |
| <param name='NAME' doc='The name of the to be used access list.' /> |
| </params> |
| </command> |
| <command id='no access-list-name'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='access-list-name' doc='Remove the access list from the NAT.' /> |
| </params> |
| </command> |
| <command id='bsc-addr NAME'> |
| <params> |
| <param name='bsc-addr' doc='Calling Address (local address of this BSC)' /> |
| <param name='NAME' doc='SCCP address name' /> |
| </params> |
| </command> |
| <command id='msc-addr NAME'> |
| <params> |
| <param name='msc-addr' doc='Called Address (remote address of the MSC)' /> |
| <param name='NAME' doc='SCCP address name' /> |
| </params> |
| </command> |
| <command id='asp-protocol (m3ua|sua|ipa)'> |
| <params> |
| <param name='asp-protocol' doc='A interface protocol to use for this MSC)' /> |
| <param name='m3ua' doc='MTP3 User Adaptation' /> |
| <param name='sua' doc='SCCP User Adaptation' /> |
| <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> |
| </params> |
| </command> |
| <command id='mgw local-ip A.B.C.D'> |
| <params> |
| <param name='mgw' doc='Configure MGCP connection to Media Gateway' /> |
| <param name='local-ip' doc='local bind to connect to MGW from' /> |
| <param name='A.B.C.D' doc='local bind IP address' /> |
| </params> |
| </command> |
| <command id='mgw local-port <0-65535>'> |
| <params> |
| <param name='mgw' doc='Configure MGCP connection to Media Gateway' /> |
| <param name='local-port' doc='local port to connect to MGW from' /> |
| <param name='<0-65535>' doc='local bind port' /> |
| </params> |
| </command> |
| <command id='mgw remote-ip A.B.C.D'> |
| <params> |
| <param name='mgw' doc='Configure MGCP connection to Media Gateway' /> |
| <param name='remote-ip' doc='remote IP address to reach the MGW at' /> |
| <param name='A.B.C.D' doc='remote IP address' /> |
| </params> |
| </command> |
| <command id='mgw remote-port <0-65535>'> |
| <params> |
| <param name='mgw' doc='Configure MGCP connection to Media Gateway' /> |
| <param name='remote-port' doc='remote port to reach the MGW at' /> |
| <param name='<0-65535>' doc='remote port' /> |
| </params> |
| </command> |
| <command id='mgw endpoint-domain NAME'> |
| <params> |
| <param name='mgw' doc='Configure MGCP connection to Media Gateway' /> |
| <param name='endpoint-domain' doc='Set the domain name to send in MGCP messages, e.g. the part 'foo' in 'rtpbridge/*@foo'.' /> |
| <param name='NAME' doc='Domain name, should be alphanumeric.' /> |
| </params> |
| </command> |
| <command id='mgw x-osmo-ign call-id'> |
| <params> |
| <param name='mgw' doc='Configure MGCP connection to Media Gateway' /> |
| <param name='x-osmo-ign' doc='Set a (non-standard) X-Osmo-IGN header in all CRCX messages for RTP streams associated with this MSC, useful for A/SCCPlite MSCs, since osmo-bsc cannot know the MSC's chosen CallID. This is enabled by default for A/SCCPlite connections, disabled by default for all others.' /> |
| <param name='call-id' doc='Send 'X-Osmo-IGN: C' to ignore CallID mismatches. See OsmoMGW.' /> |
| </params> |
| </command> |
| <command id='no mgw x-osmo-ign'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='mgw' doc='Configure MGCP connection to Media Gateway' /> |
| <param name='x-osmo-ign' doc='Do not send X-Osmo-IGN MGCP header to this MSC' /> |
| </params> |
| </command> |
| <command id='osmux (on|off|only)'> |
| <params> |
| <param name='osmux' doc='RTP multiplexing' /> |
| <param name='on' doc='Enable OSMUX' /> |
| <param name='off' doc='Disable OSMUX' /> |
| <param name='only' doc='Only use OSMUX' /> |
| </params> |
| </command> |
| </node> |
| <node id='om2k'> |
| <name>om2k</name> |
| <command id='reset-command'> |
| <params> |
| <param name='reset-command' doc='Reset the MO' /> |
| </params> |
| </command> |
| <command id='start-request'> |
| <params> |
| <param name='start-request' doc='Start the MO' /> |
| </params> |
| </command> |
| <command id='status-request'> |
| <params> |
| <param name='status-request' doc='Get the MO Status' /> |
| </params> |
| </command> |
| <command id='connect-command'> |
| <params> |
| <param name='connect-command' doc='Connect the MO' /> |
| </params> |
| </command> |
| <command id='disconnect-command'> |
| <params> |
| <param name='disconnect-command' doc='Disconnect the MO' /> |
| </params> |
| </command> |
| <command id='enable-request'> |
| <params> |
| <param name='enable-request' doc='Enable the MO' /> |
| </params> |
| </command> |
| <command id='disable-request'> |
| <params> |
| <param name='disable-request' doc='Disable the MO' /> |
| </params> |
| </command> |
| <command id='operational-info <0-1>'> |
| <params> |
| <param name='operational-info' doc='Set operational information' /> |
| <param name='<0-1>' doc='Set operational info to 0 or 1' /> |
| </params> |
| </command> |
| <command id='test-request'> |
| <params> |
| <param name='test-request' doc='Test the MO' /> |
| </params> |
| </command> |
| <command id='capabilities-request'> |
| <params> |
| <param name='capabilities-request' doc='Request MO capabilities' /> |
| </params> |
| </command> |
| <command id='configuration-request'> |
| <params> |
| <param name='configuration-request' doc='Send the configuration request for current MO' /> |
| </params> |
| </command> |
| </node> |
| <node id='om2k-con-group'> |
| <name>om2k-con-group</name> |
| <command id='con-path (add|del) <0-2047> <0-255> deconcentrated <0-63>'> |
| <params> |
| <param name='con-path' doc='CON Path (In/Out)' /> |
| <param name='add' doc='Add CON Path to Concentration Group' /> |
| <param name='del' doc='Delete CON Path from Concentration Group' /> |
| <param name='<0-2047>' doc='CON Conection Point' /> |
| <param name='<0-255>' doc='Contiguity Index' /> |
| <param name='deconcentrated' doc='De-concentrated in/outlet' /> |
| <param name='<0-63>' doc='TEI Value' /> |
| </params> |
| </command> |
| <command id='con-path (add|del) <0-2047> <0-255> concentrated <1-16>'> |
| <params> |
| <param name='con-path' doc='CON Path (In/Out)' /> |
| <param name='add' doc='Add CON Path to Concentration Group' /> |
| <param name='del' doc='Delete CON Path from Concentration Group' /> |
| <param name='<0-2047>' doc='CON Conection Point' /> |
| <param name='<0-255>' doc='Contiguity Index' /> |
| <param name='concentrated' doc='Concentrated in/outlet' /> |
| <param name='<1-16>' doc='Tag Number' /> |
| </params> |
| </command> |
| </node> |
| <node id='config-bsc'> |
| <name>config-bsc</name> |
| <command id='mid-call-text .TEXT'> |
| <params> |
| <param name='mid-call-text' doc='Set the USSD notification sent to running calls when switching from Grace to Off.' /> |
| <param name='.TEXT' doc='Text to be sent' /> |
| </params> |
| </command> |
| <command id='mid-call-timeout NR'> |
| <params> |
| <param name='mid-call-timeout' doc='Switch from Grace to Off in NR seconds.' /> |
| <param name='NR' doc='Timeout in seconds' /> |
| </params> |
| </command> |
| <command id='bsc-rf-socket PATH'> |
| <params> |
| <param name='bsc-rf-socket' doc='Set the filename for the RF control interface.' /> |
| <param name='PATH' doc='RF Control path' /> |
| </params> |
| </command> |
| <command id='bsc-auto-rf-off <1-65000>'> |
| <params> |
| <param name='bsc-auto-rf-off' doc='Disable RF on MSC Connection' /> |
| <param name='<1-65000>' doc='Timeout' /> |
| </params> |
| </command> |
| <command id='no bsc-auto-rf-off'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='bsc-auto-rf-off' doc='Disable RF on MSC Connection' /> |
| </params> |
| </command> |
| <command id='missing-msc-text .TEXT'> |
| <params> |
| <param name='missing-msc-text' doc='Set the USSD notification to be send when a MSC has not been found.' /> |
| <param name='.TEXT' doc='Text to be sent' /> |
| </params> |
| </command> |
| <command id='no missing-msc-text'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='missing-msc-text' doc='Clear the USSD notification to be send when a MSC has not been found.' /> |
| </params> |
| </command> |
| <command id='access-list-name NAME'> |
| <params> |
| <param name='access-list-name' doc='Set the name of the access list to use.' /> |
| <param name='NAME' doc='The name of the to be used access list.' /> |
| </params> |
| </command> |
| <command id='no access-list-name'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='access-list-name' doc='Remove the access list from the BSC' /> |
| </params> |
| </command> |
| <command id='access-list NAME imsi-allow [REGEXP]'> |
| <params> |
| <param name='access-list' doc='Access list commands' /> |
| <param name='NAME' doc='Name of the access list' /> |
| <param name='imsi-allow' doc='Add allowed IMSI to the list' /> |
| <param name='[REGEXP]' doc='Regexp for IMSIs' /> |
| </params> |
| </command> |
| <command id='access-list NAME imsi-deny [REGEXP] (<0-256>) (<0-256>)'> |
| <params> |
| <param name='access-list' doc='Access list commands' /> |
| <param name='NAME' doc='Name of the access list' /> |
| <param name='imsi-deny' doc='Add denied IMSI to the list' /> |
| <param name='[REGEXP]' doc='Regexp for IMSIs' /> |
| <param name='<0-256>' doc='CM Service Reject reason' /> |
| <param name='<0-256>' doc='LU Reject reason' /> |
| </params> |
| </command> |
| <command id='no access-list NAME'> |
| <params> |
| <param name='no' doc='Negate a command or set its defaults' /> |
| <param name='access-list' doc='Remove an access-list by name' /> |
| <param name='NAME' doc='The access-list to remove' /> |
| </params> |
| </command> |
| </node> |
| </vtydoc> |